Aug_Sept_2013_M

over 100 storessee back page to find your local

www.aisnational.com.auOn sale 1/8/2013 until 30/9/2013

August - September 2013

super $299

$98while stocks last

see page 5

new

230mm (9") Angle Grinder • Double action paddle lock-off dead man switch with rat tail grip • Starting current limiter & soft start • Anti-vibration • Easy access brushes • Overmold for sure grip. AGV22-230

$179

7pce ROE Spanner Sets• 7pce AF: 1-1/16" - 1-1/2". SCMT22413• 7pce Metric 21-36mm. SCMT22209*Buy 7pce AF set & get 7pce Metric free

WAR

RANT

Y

3YEARTOOL

CORDED

170CA MMA/TIG Welding Machine• Suitable for a wide range of applications • 3 year warrantyKUMJR170CA

$279

see page 21

25pce Metric Blue Bullet

Drill Set• Sizes: 1.0 - 13.0

x 0.5mm rises D102HM3

see page 10

buy 1 get 1 free*

tooltoolSAlESALE

AUstrALIA’s INDUstrIAL sUPPLIes sPeCIALIsts

2The right price & serious advice

serious Power Tools

16mm Impact Drill• 240V • Powerful 690W motor for the toughest jobs • Variable speed trigger and dial to suit multiple drilling applications • Compact and lightweight design for reduced user fatigue • Aluminium gear cover and inner cover for increased durability. DV18V

$199

260mm Slide Compound Mitre Saw • Laser marker for easy cut line alignment • Bevel range - left 45° right 45° • Mitre range - left 47° right 60° • Blade diameter 260mm • Powerful 1,430W motor • Electric brake. LS1018L

Multi Tool• 240V • High operating efficiency - up to 20,000 oscillations per minute - 3.2° oscillation angle • 12 angle settings for accessories at every 30° from 0° to 360° • Variable speed control by dial • Double insulation for protection against electric shock • Constant speed control • Compatible with all Bosch OIS (Oscillating Interface System) accessories. TM3000CX7

26mm Rotary Hammer• 240V • SDS plus type chuck • One touch sliding chuck for easy bit changes • 40 different bit angle settings - the bit angle is adjustable without chisel adapter • Easy depth adjustment - depth gauge can be adjusted with a single motion - same speed and torque even reverse rotation • Easy to grip handle ergonomically designed to give maximum power thrust • 3 mode operation: rotation only, rotation with hammering, hammering. HR2610

$199$219

Vacuum Cleaner Dust Extraction System • 240V • Ideal for general clean up and small tool dust extraction • New “Push & Go” filter cleaning system for extended operating times and filter service life • For wet and dry operation • Robust stainless steel container • Practical cable holder. VC2010L

$299

$455

10" Table Saw • 2000W • 254mm (10") blade • 87mm cut depth at 90° • 50mm cut depth at 45° • 630mm max. rip cut • 33.4kg. TS 254

new

super Deal

10.8V Cordless Reciprocating Saw• Strokes per minute: 3,100 at no lead • Stroke: 13mm • Weight: 1.4kg • "Quick" saw blade change • Variable depth guide • Universal use of sawblades • LED working light • Battery temperature monitoring and single cell protection • 2 x 1.5Ah batteriesPowermax ASE

10pce Assorted Blades

bonus

$299

800W Rotary Hammer Drill• 240V • 3 x mode - rotary hammer, drilling & chiseling • Variable speed: 0-1150RPM • Drills steel, wood & concrete -13mm/ 30mm/24mm • 2.4 joules • Safety clutch prevents kickback • Includes side handle, depth stop & carry case • Weight 2.5kg. KHE 2443

SDS Chisel Setbonus

$285

560W Impact/Hammer Drill• 240V • Variable speed: 0-2800RPM • Drills steel, wood & concrete -10mm/20mm/12mm • Forward & reverse • 13mm keyless chuck • Rubber grip handle • Auto stop carbon brushes • Includes side handle, depth stop & carry case • Weight 1.7kg. SBE561

$125

$999 SortimoKM321E

bonus

4pce Heavy Duty Power Pack• Kit includes: C18PD - 13mm hammer drill/driver • C18ID - 1/4" HEX impact driver • HD18AG - heavy duty 115mm angle grinder • HD18HIW - heavy duty 1/2" high torque wrench • 3 x 3.0Ah REDLITHIUM™ batteries • Dual voltage charger • Contractor bagHD18PP4S-303B

WAR

RANT

Y CORDLESS LI-ION

5YEAR

TOOL

2YEARBATTERY

$949

supertooltoolSAlESALE

3

Prices include GST and may vary in store. Freight charges may apply. Some products may not be available at all stores and are subject to availability. Australian Industrial Supplies Ltd reserves the right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may differ from images shown.

SeriouS trade toolS

18V Slide 3pce Combination Pack • Ergonomic soft grip handles • Compact & lightweight • Convenient LED and belt hooks • 2 x 4.0Ah batteries with multiple protection circuit KC18DGRL

18V 4.0Ah Li-Ion Automatic Screwdriver• Suits collated screw strips • Features multiple plate friction type silent clutch that achieves shock free clutching and low noise operation • Tool-less depth dial • Screw guide on slider case ensures accurate screw strip feed • Quick adjustment button to allow adjustment for 25-41mm screws • 2 x 4.0Ah batteries with multiple protection circuit. WF18DSL(HW)Also Available: WF18DSL(H4) Naked only $309.00

new

$729

18V Slide 2pce Combination Pack • Ergonomic soft grip handles • Compact & lightweight • 2 x high capacity compact 2.0Ah batteries with multiple protection circuit providing long run timeKC18DSVL

new

$359new

3rd 4.0Ah Li-ion Slide Battery 334421

bonus $635

18V XR Li-Ion Grinder Skin • Intelligent trigger & lock-off switch for enhanced work safety and control • Low profile jam pot gear case • Steel cut spiral bevel gears for durability and low vibrationDCG412N

$169 $16918V XR Li-Ion Reciprocating Saw Skin• Rubber coated grip reduces vibration • Improved ergonomic design • Four-position blade clamp allows for flush cutting and increased versatilityDCS380N

$569$475

18V XR Li-Ion High Torque Impact Wrench Kit•18V 418Nm XR Li-lon 1/2"sq drive • High torque wrench • 2 x 4.0Ah batteries • Fast charger • Kit boxDCF889M2-XEAlso Available: DCF889N 18V XR Li-Ion High Torque Impact Wrench - Skin only $245.00

3rd 4.0Ah Battery DCB182

bonusImpact

Socket SetDT7507-QZ

bonus

18V XRP Li-Ion Hammer Drill/Driver Kit• 2 x 4.0Ah Li-Ion battery technology• Tough 3 speed all metal transmission for increased runtime and longer tool life • 22 position adjustable torque control for optimised precision when screwdriving • 13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes. DCD985M2-XE

super deal

18V Mobile 3pce Combo Kit• BGA452Z - 18V 115mm mobile angle grinder • BHP458RFE - 18V mobile hammer driver drill 13mm • BTW251Z - 18V mobile impact wrench • 2 x 3.0Ah batteries, charger • Case & tool bag. LXT306

$799

M18 Heavy Duty Metal Saw Kit • Compact, ergonomic design provides superior control • 4-pole frameless motor delivers 3600RPM • Built-in LED light and large transparent window improve line of sight • Tool-free depth adjustment from 3mm - 50mm with a 135mm blade • Complete with 2 x 3.0Ah REDLITHIUM™, dual charger & contractors bag • Warranty 5 years on tool - 2 years on batteryHD18MS-32B

WAR

RANT

Y CORDLESS LI-ION

5YEAR

TOOL

2YEARBATTERY

$579

M18 Six Pack Charger• Reduce downtime, increase productivity • Charges up to six batteries sequentially • Convenient carrying handle • Compact size • 2 year warranty. M1418C6

$249

batteries not

included

4AIS gift vouchers - perfect for the trade professional

SerIouS Power ToolS

SerIouS AbrASIveS

125mm (5") 1080W Grinder & Accessories Kit • 240V • 1080W 125mm angle grinder • 100 x Flexiamant Super 125 x 1mm cutting discs • 10 x 125mm Combinator Inox discs • 5 x 125mm flap discs Novoflex Zirkon stainless P60 • Wire brush 70mm M14 • 125mm diamond blade • Kit bag. W1080

new

x100x5x10$289

230mm (9") Angle Grinder • 240V • Double action paddle lock-off dead man switch with rat tail grip • Starting current limiter & soft start • Anti-vibration • Easy access brushes • Overmold for sure grip. AGV22-230

$179

new

super DeAl

$269

14" Metal Chop Saw • 240V • 2300W motor with 3800RPM for

excellent cutting performance • Quick release mitre adjustment for fast angle

settings from -45° to +45° • Quick release vice clamp for fast work piece

change • Spindle lock for fast and easy disc change • Integrated metal fan for

best durability and long life • 3 year warranty

CHS355

WAR

RANT

Y

3YEARTOOL

CORDED

125mm (5") 900W Angle Grinder• 240V AC battery • Dust ejection system removes majority of debris from the air which passes over the motor, preventing abrasion and tracking • Small girth allow comfortable gripping resulting in superior ergonomics • The low profile gear case allows access in confined areas. D28130KS-XE

$145

9 Discs & HD Kit Boxbonus

100mm (4”) 730W Angle

Grinder• 240V • 1 x grinding,

1 x diamond, 3 x cutting wheels • Tape measure in

carry caseG10SR3BP

180mm (7") Angle Grinder with Soft Start and UVP• 240V • Easy to use safety non-lockable "Deadman" switch • UVP - User Vibration Protection: vibration- absorbing on both body and side handle. Anti vibration handle reducing vibration by 35% • Tool-less wheel guard • Electronic soft start control • Three position handle • Less sound & noise from gearing. G18UBY(H1)

$89 $289

Grinding Wheels• General purpose • Provides long life • For use on ferrous metal welds and structural steel • Rough grinding

Part No Size Each 50pk6310260 100 x 6 x 16mm $1.40 $65.00 6311560 115 x 6 x 16mm $1.85 $85.00 6012768 125 x 6.8 x 22mm $2.05 $95.00Part No Size Each 25pk 6017868 180 x 6.8 x 22mm $3.50 $80.00Part No Size Each 10pk6023068 230 x 6.8 x 22mm $4.25 $40.00

General Purpose Cutting Wheels• For all ferrous metals • Excellent product life and cutting performance

Part No Size [mm] Each 100pk1010216 100 x 2.5 x 16 $1.80 $125.00 1011522 115 x 2.5 x 22 $1.95 $150.00 1012722 125 x 2.5 x 22 $2.10 $165.00 Part No Size [mm] Each 50pk1015222 150 x 2.5 x 22 $2.70 $110.001017822 180 x 2.5 x 22 $2.90 $115.001023022 230 x 2.5 x 22 $3.20 $130.00

pack of 10 FROM

$40

pack of 50 FROM

$110

DUODISC 2 in 1 Grinding & Cutting Wheel• Fast and convenient in

cutting and light grinding• Avoids inconvenient time

consuming wheel changes• Available in 1.9 & 2.8mm thicknesses • For use on mild steel and stainless steel

Part No Size Thickness Each 10pk62010630 100mm (4”) 1.9mm $2.95 $25.0062011630 115mm (4-1/2”) 1.9mm $3.95 $35.0062012630 125mm (5”) 1.9mm $3.95 $35.00

100mm (4”) Combiclick Grinding Starter Pack• 1x black backing pad, 1x of each 36, 60, 80 Grit ceramic CP-COOL fibre discs • Grinding & finishing metal has never been easier • Special backing pad and matching resin fibre disc • The new way to grind and finish metal • Save time with more stock removal • Longer life & less heat • Less noise. 75520199Also Available: 75520200 125mm (5") $50.00(contents slightly different)

$55

super DeAl

1.0mm Ultra Thin Metal Cutting Wheels• Fast cutting action, reducing heat and burr build up • Suitable for cutting of metal, sheet profiles, & solid materials • INOX wheel - For use on stainless steel & mild steel applications

Part No Size Each 25pk61339412 100mm (4”) Disc $1.97 $47.90 61340412 115mm (4-1/2”) Disc $1.97 $47.90 61341112 125mm (5”) Disc $1.97 $47.90

$4790$197 ea

pack of 25pack of 10 FROM

$25


5


SeriouS trade toolS

SeriouS cutting, drilling & abraSiveS

Drill Doctor 500X Drill Bit Sharpener• 2.5-13mm drill bit capacity • 118º or 135º sharpening angle • Creates & restores split point bits • Diamond sharpening wheel • 3 year warranty • Bonus extra diamond wheel DD500X

Extra Diamond Wheel

bonus

$295

28pce Holesaw Kit Ice Hardened• 22pce hole saw blades - 19mm to 121mm • Two (2) arbors with pilot bit • Three (3) additional pilot bits • One (1) adapter • One (1) spacer. 49224185

$279

Retractable Knife• Blade wiper removes excess dirt and protects knife • Blade clamp eliminates blade wobble, gives control • Ergonomic design for ease of use • Soft touch panels/grips allow better control, fewer slips • Pop-up blade dispenser for easy access and fast changeover • Push-button blade change - no tools needed. 10-778

5pk Blades11-700

bonus

$1650

19pce Metric Workshop Cobalt HSS TiNite Drill Set

• Sizes: 1.0-10.0 x 0.5mm • TiNite coated tip for increased wear

resistance. The highest wear is incurred at the drill tip and cutting

edges to depths twice the drill diameter • 135° split point

• Drill depth indicator • Made to DIN standard • Built in drill gauge

150B0WC2MAlso Available:

150B0WC3M 25pce metric 1.0-13.0 x 0.5mm $148.00

$74

3pce Promo Burr Set• Double cut bur allows for rapid stock removal in harder materials • Drill depth indicator • Made to DIN standard • Built in drill gaugeB9000001

$59

Eye Piecebonus25pce Metric Blue Bullet Drill Set

• Sizes: 1.0-13.0 x 0.5mm rises • The blue finish is a ferric oxide surface coating which resists chip build

up on the cutting edge, reducing frictional drag, and therefore reducing heat generated

• It greatly increases drilling life and ability, especially in ferrous materials such as steel, stainless steels, high tensile steel,

alloy and tool steel • Drills are precision ground from a solid heat treated high speed steel

blank. D102HM3

while stocks last

$98

Quickbit Extension• Quick change spring-loaded sleeve • Tapered head design guides the extension through the hole • Recessed sleeve prevents accidental release • Slim diameter passes through 11/16" hole

Part No Size Price107QBE150 150mm $9.00 107QBE300 300mm $12.00 107QBE450 450mm $16.00 107QBE600 600mm $25.00107QBE900 900mm $38.00

$9FROM

while stocks last

Plastic Lockback Folding Utility Knife

• High impact plastic handle • Stainless steel frame quick change blade

mechanism • Spring blade lock release • Integrated string

cutter & more. K6100

Folding Lockback Utility Knife• Lightweight aluminium & stainless steel construction • Compact size when folded • Spring blade lock release • Includes 5 spare blades. K060045

$1695

$995

Bi Metal Cordless Smooth Cutting General Purpose Holesaw Kit• Cuts metal, aluminium, stainless steel, non ferrous, plaster • Will also cut wood, veneer, plastic, acrylic, fibreglass, formica • Each holesaw comes with an arbor, pilot drill, & ejector spring • Cutting depth 13mm • Kit includes holesaws sizes: 16,20,22,29,30,32, 38mm plus a quick change connector. KCSC2000G

$190

super deal29pce Imperial Alpha Gold Series

Drill Set 1/16-1/2"• Alpha slimbox, slim & compact metal

box 32mm thick • 29 AF drill bits in 1/16" increments from 1/16 " to 1/2" • Genuine Alpha Gold Series

jobber drill bits • 135° split point cuts faster and prevents wandering

• Fully ground M2 HSS increases drill life • Titanium nitride coating

reduces heat and increases lubricity. SI29

Also Available:SI21 21pce 1/16-3/8" $65.00

25pce Metric/AF Gold Series Drill Set 1.0-13.0mm

• Alpha slimbox, slim & compact metal box 32mm thick • 25 metric drill bits in 0.5mm increments from 1.0mm to

13.0mm • Genuine Alpha Gold Series jobber drill bits • 135° split point

cuts faster and prevents wandering • Fully ground M2 HSS increases

drill life • Titanium nitride coating reduces heat and increases lubricity. SM25

Also Available:SM19 19pce 1.0-10.0mm $60.00

$125 $99

110pce Tap & Die Set• UNC, UNF, UNS, metric & NPT • Comprehensive range of sizes • Includes accessories • Starter & finisher taps. PT52

$179

6Visit www.aisnational.com.au for your nearest store & more

serious cutting & drilling

serious ladders

High Speed Steel Blade• RC hardness of 63-66 • Hollow ground side relief • Central hub and drive slots • Can be resharpened

Part No Size PriceHSS30040220 300 x 40 x 220t $179.00HSS31532180 315 x 32 x 180t $215.00HSS31532220 315 x 32 x 220t $215.00HSS31540180 315 x 40 x 180t $215.00HSS31540220 315 x 40 x 220t $215.00HSS35032180 350 x 32 x 180t $235.00HSS35032220 350 x 32 x 220t $235.00HSS35040180 350 x 40 x 180t $235.00HSS35040220 350 x 40 x 220t $235.00HSS40040180 400 x 40 x 180t $330.00

Bar Mat

bonus

Silencio Diamond Blade• Innovative patent pending technology • Reduction of high end frequency by up to 25dB(A) • Up to 30 times less noise • 15mm segment height provides up to 20% longer life

Part No Size Price70184629000 300 x 20.0mm $325.0070184628999 350 x 25.4mm $375.0070184643510 400 x 25.4mm $450.00

12pce Reciprocating Blade Kit

• Demolition kit • Bonus ABS case • Bi -Metal blades with

T2 technology. 12144

300mm Heavy Duty Hacksaw Frame• Heavy duty box frame • High tension frame prevents twisting • 45° and 90° cutting angles • Easy to use adjustable lever • Rubber grip handle. 145

300mm Bi Metal Hacksaw Blade• Available in 18, 24 or 32tpi • Ground teeth for faster cutting • Starrett 'unique' bi metal blades lasts 30% longer than others

Part No Size Each 50pkBS1218 18tpi $1.95 $75.00 BS1224 24tpi $1.95 $75.00 BS1232 32tpi $1.95 $75.00

150kg 8ft (2.4m) Double Sided Ladder• Riveted construction • Heavy duty extruded aluminium construction with additional “Tri-brace” tread bracing • Double sided for greater versatility and greater load bearing strength • Incorporating Bailey’s patented “Quicklock®” internal arm system which provides extra stability and resistance to ladder-walk • Anti-slip feet for added safety and stability • Made to Australian and New Zealand Standards AS/NZS 1892.1. FS13431Part No Size PriceFS13428 3ft (0.9m) $99.00FS13429 4ft (1.2m) $149.00FS13430 6ft (1.8m) $199.00

150kg Trade Platform 6 Step• Australian Made & Owned • Industrial Duty rated – designed for use on industrial work sites. • Strong, Henrob riveted aluminium construction with additional tread bracing • Welded rear frame for extra strength and durability • Wide, anti-slip platform (490mm x 400mm) • 900mm handrail height • Available - optional fold-away Safety Gate • Made to Australian Safety Standards. FS13330Part No Size PriceFS13327 3 Step $265.00FS13328 4 Step $335.00FS13329 5 Step $345.00

super deal

Gorilla Adjustable Height Work Platform with Connecting Brackets• Large work platform

(1150 x 395mm) • Adjustable height (0.6-0.9m) • Positive locks • Folding design • 120kg Industrial MW105-CWBAlso Available:MW105-I450 450mm Extra Wide Work Platform, 150kg Industrial 0.6-0.9m $139.00

150kg Industrial Moulded Safety Step• Non-slip grip tape • Large platform surface • Non-slip rubber feet • 150kg industrial. GOR-STEP

150kg Industrial 6ft (1.8m) Double Sided Fibreglass Ladder• Non-slip aluminium steps • Cross-brace spreader • Non-slip rubber feet • Stabiliser ready • 150kg industrial FSM006-IPart No Size PriceFSM003-I 3ft (0.9m) $125.00FSM004-I 4ft (1.2m) $179.00FSM008-I 8ft (2.4m) $369.00FSM010-I 10ft (3.0m) $449.00FSM012-I 12ft (3.6m) $549.00

$179FROM

$325FROM

$55$2695 $195FROM

$219

$355

$119

$69

$259


7


SeriouS trade toolS

SeriouS material handling

Lever Hoists• Robust all steel construction• Super strength alloy load chain• All hooks fitted with safety latch• Test certificate supplied• Complies with ASNZS1418.2

Part No Size Lift PriceGLH025 0.25t 1.5m $105.00GLH050 0.5t 1.5m $155.00GLH075 0.75t 1.5m $165.00GLH150 1.5t 1.5m $219.00GLH300 3.0t 1.5m $329.00

super deal

Mega Round Slings• WLL indicator stripes • Complies to AS4497

1000kg Size PriceMRS1000X1 1m $5.00MRS1000X2 2m $8.50MRS1000X3 3m $10.90



8mm x 9m Lashing Chain Kit• Grade 70 load chain kit complete with grab hooks each end • Lashing capacity 3800kg • Packed in a reusable plastic tool box. 145128

Grade 70 Ratchet Type Loadbinder• 7-8mm comes with winged eye grab hooks • Lashing capacity 3800kg344008Also Available:348000WF Grade 70 Web - Dog $69.95

250kg Capacity Heavy Duty Hand Truck• With 6" flat free wheels . KF71512Fully powdercoated yellow frame

Also Available: KF71510 200kg Capacity with 6" flat free wheels $179.00Fully powdercoated blue frame

R

300kg Table Lifter• Hydraulic powered, foot operated

• Adjustable lowering speed • Table size 815mm x 500mm

• Min table height 285mm • Max table height 880mm

• 300kg capacityTLM3319-30N1

3/4" Ball Bearing Flat Free Offset Wheel• Suitable for most hand trolleys requiring an offset wheel • Fitted with the highest quality tough rubber tyre • 3 piece zinc plated rim & rubber sealed precision bearings PF1047-75Also Available:PF1047-62 5/8” Ball Bearing Flat Free Offset wheel $39.00

R R

Puncture Proof Wheels• Richmond’s fully puncture proof wheels eliminates flat tyres and replacing tubes • High load capacities suited to hand trucks, nursery equipment, industrial and agricultural equipment

Part No Description PricePF8881-75 8”. 2.50-4 Tyre Size, 100kg capacity. 3/4” bore $25.00PF1084-75 10”. 4.10/3.50-4. 100kg capacity. 3/4” bore $35.0016" Wide Wheelbarrow WheelsPF1628-1 16x6.50-8. 200kg capacity. 1” bore $89.00PF1632-1 4.00-8. 200kg capacity. 1” bore $59.00

Heavy Duty Garage Jack• 2000kg safe working capacity • Professional

quality • Low profile • Minimum height: 110mm • Maximum height: 510mm • Nett weight: 47kg. 2801

Also Available:2802 Aluminium Low Profile Jack

1600kg Working Load Limit $479.00

2pce Ratchet Jack Stands• Manufactured from heavy duty steel• Quick action height adjustable• Steel frame & cast support• Reinforced shaft for added strength stability• Meets Australian standards AUS/NZ 2538:2004

Part No. Capacity PriceK12073 2000kg $59.95K12074 3000kg $79.95K12075 5000kg $149.95

$105FROM

$5990

$5FROM

$199

$495 $35

$39

$25FROM

$279

$5995FROM

8We're serious about customer service

serious Hand tools

19pce 1/4" Ergonic Reversible Ratchet RGO19 Metric Socket Set• High quality 72t reversible ratchet with an ergonomic two component handle • Elastomer rubber handles ensure increased grip and control • 13 high torque metric sockets sized: 4-14mm • Knurled socket extensions with a 30° wobble • Supplied in a quality box with a soft foam tool insert bed05781906

$89

42pce 1/4" & 3/8" Drive Socket Set• Metal storage case • EVA tray can be easily removed for convenient storage into a tool chest/trolley drawer • Contents: 1/4” drive 6pt sockets, 1/4” drive teardrop ratchet, 1/4”F x 3/8”M adapter, 3/8” drive 12pt sockets, 3/8” drive teardrop ratchet, 3” extension bar, universal joint, 3/8”F x 1/4”M adapter, 2 x spark plug sockets. 83050

$99

194pce Metric / AF Tool Cabinet• 1/4" sockets & accessories including 10 metric and 9 AF sockets • 1/2" sockets & accessories including 20 metric and 17 AF sockets • ROE spanners including 14 metric and 10 AF spanners • Geared wrench stubby spanners including 10 metric and 7 AF spanners • Open end spanners including 8 metric and 7 AF spanners • Screwdrivers including philips and standard tip • Long ball point hex keys, punches, cold chisels, adjustable wrenches, pliers set, ball pein hammer, hack saw, feeler gauges, circuit tester & 8M tape rule • Heavy duty steel wall mount cabinet. SCMT10107

$1799

super deal

244pce Metric / AF Tool Kit• 1/4" Dr metric / A/F sockets & accessories • 3/8" Dr metric & A/F sockets & accessories • 1/2" Dr metric & A/F sockets & accessories • Combination ring & open end spanners • Screwdrivers, hex keys, 1/4" bits, adjustable wrenches, pliers, hammer, hacksaw, punches, chisels, knife, tape and bit kit. 95-989

Roller Cabinet

59-549

bonus

$969

132pce Heavy Duty Trade Tool Kit• 1/4”& 1/2”drive metric/ AF sockets & accessories • 1/2” drive spark plug sockets • 33 assorted 1/4” Bits • Screwdriver, hex & Torx® • Combination ROE spanners metric/AF • Hex key set • Pliers • Adjustable wrench. 99-059

79pce 1/4" & 1/2" Drive Metric / AF Combination Set• Blow mould case • 1/4" Dr metric/AF sockets and accessories • 1/2" Dr metric and AF sockets and accessories • Metric and AF ROE spanners. SCMT10800

$239

$199

59pce 1/4"-3/8"-1/2" Drive Socket Set• 1/4" Dr 4-12mm, 1/4-1/2" • 3/8" Dr 13-19mm, 9/16-3/4"• 1/2" Dr 21-32mm, 13/16-1-1/4" • 45T ratchets, flex handles, and wobble extension bars • Spark plug sockets• 3/8"Dr Inhex socket bits. SP20280

$199

Sports Utility KnifeKGSU-01

bonus

94pce 1/4" & 1/2" Combination Socket & Spanner Set• 1/4" and 1/2" 6pt dynamic drive sockets • 1/2" 6pt deep dynamic drive sockets • 1/2" 6pt impact sockets • 1/4" and 1/2" bits and accessories S87+7

$279279pce

Aluminium Truck Box Tool Kit

• "Lok-On" sockets and accessories

• 1/4", 3/8", 1/2" Dr • Impact sockets • Mirror polish combination

spanners • Adjustable wrenches, hex keys, hammer, hacksaw and much more. K1256

$1969

26pce 3/4" Drive Socket Set - Metric / AF• Chrome vanadium steel • 10 metric sockets 22-50mm • 12 AF sockets 7/8-2" • 4 accessories • Blow mould case. P2027

$299

new


9


SeriouS trade toolS

Pro Series Aviation Snips• Non-slip serrated jaws • Extra tough wear-resistant molybdenum steel • Compound lever action • High strength steel handles • Self-opening action for fast, effortless feed • Convenient, protective safety latch • Handles colour-coded for ease of identification • Handy-hang up hole • Non-slip, textured grips for superior control, safety & comfort

Part No Description PriceM1RAU Left Cut $29.95M2RAU Right Cut $29.95M3RAU Left & Right Cut $29.95

$2995EACH

14pce Industrial Acetate Screwdriver Set• Set contains: square blade: 12 x 300mm • Tang thru: 8 x 200mm • Standard tip • 6 x 150mm, 5 x 100mm, 4 x 75mm, 3 x 45mm, 6 x 38mm • Sheathed: 2 x 150mm, 5 x 150mm • Phillips: #2 x 200mm, #3 x 150mm, #1 x 100mm, #2 x 45mm. 65.8000

$4990

super deal

202pce Metric / AF Tool Kit in Custom Series Tool Box• ROE spanners and sockets & socket accessories come in EVA hi-density storage • 1/4", 3/8" & 1/2" Dr sockets and accessories • Pliers and cutters • Screwdrivers and hexkeys • Hammer, hacksaw, pry bars, hook and pick sets. SP50101LE

Open Mouth Bag SP40360

bonus

$995

10pce 1/2" Drive In-Hex Socket Sets• Metric or AF • 4, 5, 6, 7, 8, 10, 12, 14, 17 & 19mm. 13669Also Available:13668 AF 5/32,3/16,7/32,1/4,5/16,3/8,1/2,9/16,5/8 & 3/4" $70

220pce Toolkit Metric / AF• 9 drawer toolbox, 6 vacuum formed inserts • 1/4, 3/8, & 1/2" Dr socket sets • Combination spanner sets • Assorted pliers, screwdriver set • Adjustable wrenches, punch & chisel set • Hacksaw, hammer plus much more. ATK920

$990

$70EACH

6" 80 Series Adjustable Wrench • A precision-hardnened, phosphated, adjustable wrench with an ergonomic handle for good grip and comfort. 8070Part No Size Price8071 8" $42 8072 10" $55 8073 12" $82 8074 15" $1298075 18" $189

$39made in spain

Cast Aluminium Pipe Wrenches• Cast aluminium is 40% lighter than cast iron • Drop forged jaw • Hardened teeth • I beam handle for strength and weight

Part No Size Price2074112 12" $352074118 18" $652074124 24" $992074136 36" $199

$35FROM

40pce 1/2" Drive "Lok - On" Socket Set Metric / AF• "Lok-On" sockets loosens up to 85% rounded fasteners, offer a better torque and prevent the fastener from rounding • 18 metric sockets 8-32mm • 15 AF sockets 3/8-1.1/4" • 7 accessories. K2042

8pce Thru - Tang Screwdriver Set• Features a square shaft so a spanner can be attached for greater turning force • Chrome vanadium shaft designed for industrial applications • The continuous thru-tang combined with striking end cap designed to withstand hammer blows • High impact acetate handle for superior strength and durability • Comes in heavy duty blow mould case. K5057Also Available: K5058 12pce $64.95

1/4" Drive Micrometer Torque Wrench• Dual scale torque wrench: 17.7 - 212.4 Inch/lb, 2.0 - 24.0Nm • No pointer or dial to monitor • Easy locking • Easy grip handle • Can be used in the dark, blind spots, in oil, noisy surroundings and on vibrating machinery. MTW200IPart No Size PriceMTW80F 3/8" Dr 80ft/lb $89.95 MTW150F 1/2" Dr 150ft/lb $89.95

$199

$4995

$8995


serious Hand Tools

11pce Combination Spanner Set• Metric No 1B open end spanner set • 11pce 8mm-19mm • Contact drive ring prevents rounding • Deep offset ring with 10º offset • Extra strong all round. GE1B/11MR

11pce Combination Spanner Set• Metric combination spanner set • 11pce 8mm-19mm • No 7 slim line 15º offset • Slim line - I beam section - Increases strength reduces weight • Contact drive - prevents rounding of fasteners • Slim jaw design - allowing access to tight area. GE7/11MR

$149 $149

9pce Whitworth Combination Spanner Set• 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16 & 5/8 • Heavy duty wallet. ET61700

$88

3pce 12-in-3 Reverse Gear Spanner Set• Spanner 1 - 8, 9, 10, 11mm • Spanner 2 - 12, 13, 14, 15mm • Spanner 3 - 16, 17, 18, 19mm. K3007

5pce 20-in-5 Reverse Gear Spanner Set• Spanner 1 - 8, 9, 10, 11mm • Spanner 2 - 12, 13, 14, 15mm • Spanner 3 - 16, 17, 18, 19mm • Spanner 4 - 21, 22, 24, 27mm • Spanner 5 - 30, 32, 34, 36mmK3001

4pce 16-in-4 Reverse Gear Spanner Set• Spanner 1 - 8, 9, 10, 11mm • Spanner 2 - 12, 13, 14, 15mm • Spanner 3 - 16, 17, 18, 19mm • Spanner 4 - 21, 22, 24, 27mm K3008

new

$219 $59

new $129

14pce ROE Metric Spanner Set• Sizes 6-19mm • Chrome vanadium steel • Dual flat drive technology. SP10014Also Available:SP10063 13pce AF set 1/4"-1" $99.00

9pce Geardrive Reversible ROE Metric Spanner Set• Sizes 8-19mm • Chrome vanadium steel. SP10109Also Available:SP10158 8pce AF set 5/16"-3/4" $149.00

$99

$149

10pce Metric Ratcheting Combination Set• Metric sizes: 8,10, 11, 12, 13, 14, 15, 16, 17, 19mm • EVA removable tray in a metal storage case. 83052Also Available:83053 10pce AF sizes: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16” $119.00

$119

Maxsteel Adjustable Wrenches• Tapered jaw design allows for work in limited space applications • Wide-capacity jaw accepts a wide range of sizes • Knurl adjusting mechanism for quick and adjustment • Laser-etched jaw scale for easy size adjustment

Part No Size90-948/90-949/90-950 200/250/300mm

24pce Spanner Set Ring & Open End Met/AF • 12 Metric spanners: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22mm • 12 AF spanners: 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16” • Packaged in spanner roll. 89-520

7pce ROE Spanner Sets • 7pce AF sizes: 1-1/16, 1-1/8, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2" SCMT22413• 7pce Metric sizes: 21, 22, 24, 27, 30, 32, 36mm SCMT22209*Buy 7pce AF set & get 7pce Metric free

Maxsteel Adjustable Wrench 150mm

90-947

bonus

$99$299

buy 1 get 1 free *

$4995


11


SeriouS trade toolS

3pce Lady Foot Pry Bar Set (Incl 300, 400, 450mm)• Ideal for accurate positioning work • Unique curved end enables better leverage in small confined areas • Opposite end is designed for aligning work • Manufactured from the highest quality alloy and carbon steel • Fully heat treated shank for maximum strength and durability. 60150

$14995

Mesh Cutter• Specially designed for cutting concrete mesh • Centre cut • Comfortable rubber handles for gripping firmly and safely • Spare heads available • Made in Japan. HITRCA800

10T Hydraulic Gear Puller Kit• Complete with bearing separator, main rods, extension rods, twin/triple head, beam and legs to build 4", 6" and 8" two and three leg hydraulic pullers • Separator capacity 75 - 105mm. 265000

PROFESSIONAL TOOLS

Swaging/Crimping Tool with Cutter• Designed to compress aluminium and copper sleeves onto cables • Swaging jaw keeps swaging surfaces in line with each other for accurate termination • Comfortable rubber handles • 1.58-3.5mm crimping capacity • 350mm (14") length. 316007Also Available:316008 1.58-5mm Crimping Capacity, 600mm (24") length $62.50

$269

$175 $4250

4pce Circlip Plier Set• 180mm • Capacity - 19-60mm • Internal & external straight. 17674

$955pce Original Vise-Grip Set with Tool Bag• Includes 10WR, 10R, 7CR, 6LN, 5WR • Locking pliers are ideal for welding, metal

work and all purpose clamping. 2077704

$99

3.6kg (8lb) Sledge Hammer• Fibreglass handle with graphite core for greater strength and durability • Rubber handle for greater comfort • Rubber collar at base of head to prevent damage when miss hit occurs • 900mm in length • Head manufactured from carbon steelK9060Part No Size PriceK9061 4.5kg (10lb) $54.95 K9062 5.4kg (12lb) $59.95

8oz Ball Pein Hammer• Hickory shaft with rubber end cap and twin handle wedges • Forged from high carbon steel • Precision ground, polished head with chamfered edges. K090005Part No Size PriceK090006 16oz $21.95 K090007 24oz $23.95 K090008 32oz $29.95

1.3kg (3lb) Club Hammer• Fibreglass handle with graphite core for greater strength and durability • Rubber handle for greater comfort • Rubber collar at base of head to prevent damage when miss hit occurs. K9063Also Available:K9064 1.8kg (4 lb) $24.95

$4995$1995

new

new

$1295

$1995EACH

200mm S-Series 1000V Universal Pliers• Heat treated forged alloy steel with hardened cutting edges • Non-slip cushion grip • Proven, reliable tools from reputable trusted brand, Crescent. CHV508Part No Description PriceCHV410 Multi-Grip 250mm $19.95 CHV5248 Diagonal Pliers 200mm $19.95 CHV6548 Long Nose Pliers 200mm $19.95

Universal Straight Shears• Highly versatile, heavy duty shears • Soft rubber grip features a 2 position hand grip lever • Serrated stainless steel cutting edges • Safety lock in closed position. SCMT28560Also Available:SCMT28561 Bent Shears $16.95

397g/14oz MIG Claw Hammer• Revolutionary lightweight 14oz hammer designed to hit like a 24oz • Oversized strike face • Magnetic nail starting holder • MIG weld technology • Approx length: 370mm XTHT51148

Nail Punch 58-501

bonus

$49

$1695


SerIouS hAnd ToolS

8pce Metric T-Handle Set• Contains sizes: 2, 2.5, 3, 4, 5, 6, 8, 10mm • T-Handle for maximum torque when inserting/extracting screws • Sets include vinyl wallet. 13387Also Available: 13332 8pce AF T-Handle set. Contains sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, ¼” $49.00

$49

General Purpose Forged Steel F Clamps• Tempered and hot forged steel for rigidity • Nickel and chrome plating for high corrosion resistance

Part No Span x Depth Force PriceECG16CS 160 x 80mm 300kg $25.00 ECG20CS 200 x 100mm 450kg $32.00ECG25CS 250 x 120mm 550kg $38.00 ECG30CS 300 x 140mm 670kg $49.00ECSG40CS 400 x 120mm 750kg $55.00ECG40CS 400 x 175mm 1000kg $65.00ECSG50CS 500 x 120mm 750kg $60.00 ECSG60CS 600 x 120mm 750kg $65.00 ECG60CS 600 x 175mm 1000kg $75.00ECG80CS 800 x 175mm 1000kg $85.00

$25FROM

new

Indexing & Extendable Pry-Bars• Push button locking indexing head• Push button locking extending bar• Meets or exceeds ANSI standard

Part No Size PriceMGPB1315 315-450mm $45.00MGPB1620 620-900mm $69.00MGPB1863 860-1350mm $160.00

$45FROM

Electronic Digital Torque Adaptors • Converts any ratchet into a torque wrench • 4 torque measurement settings (ft-lbs, in-lbs, Nm, cm-kg) • 3 colour LED light indicator and progressive audio notification when reaching specified torque

Part No Size Price ET30100 1/4”Drive $69.95 ET30110 3/8”Drive $69.95 ET30120 1/2”Drive $69.95

$6995EACH

F Clamps• Average clamping force 300kg • Cast iron malleable heads • Nickel plated for corrosion resistance • Slip resistant bar

Part No Opening Width PriceEC-SCR8 200mm $15.95EC-SCR12 300mm $18.95EC-SCR16 400mm $21.95EC-SCR24 600mm $24.95EC-SCR32 800mm $29.95

$1595FROM

Compact Fencing Bolt Cutter• Requires 61% less effort than cutting with a high leverage diagonal cutter of the same length • Cutting edges additionally induction hardened, cutting edge hardness approx. 64HRC • With fencing grade • 200mm length • Made in Germany. 7101200RAlso Available:7131200R With recess for easier cutting of thicker wires $89.95

Ratchet Podger Metric• Made from high quality drop-forged chrome vanadium steel • Combination double socket - two sizes in one • In-built ratchet reverse direction lever • Tapered end designed to align bolt holes easily • Specially designed for heavy duty/industrial use

Part No Size Price301228 18 x 24mm $34.50301229 19 x 21mm $34.50301231 21 x 24mm $34.50301234 24 x 30mm $52.50301236 27 x 32mm $54.50

Flat Cold Chisel Set• Set of 4 flat cold chisels • Can be reground repeatedly to maintain effectiveness • Sizes: 8, 10, 12, 14mm • Made in Germany. RCS4

$3995

$8495$3450FROM

28pce Stud Removal & Insert Set• Uniquely designed tool for removal & installation of studs without damaging the threads • Each thread size uses one tool for removal and one for installation SP31255

$189 5pce 8” File Set• Contains 1 each of: Hand file bastard cut, hand file 2nd cut, square file bastard cut, 1/2 round file bastard cut, round file bastard cut. 1-478-08-1-2

$5995

75mm Super Grade G Clamps• Malleable Iron • Cast heavy ribbed frame for strength and durability • Corrosion resistant zinc plated Whitworth threaded screw, sliding bar handle and swivel pad. 61152Part No Size Price61153 100mm $37.95 61155 150mm $49.95

$3495

9pce Hex Key Sets• Manufactured from chrome molybdenum steel • Hardened, chrome plated and powdercoated

Part No Type PriceK5042 AF $29.95K5043 Metric $29.95K5044 Tamperproof Torx $29.95K5009 Torx $29.95

$2995EACH


13


SeriouS trade toolS

SeriouS meaSuring toolS

260mm Magnetic Angle Measuring Level• High visibility, non fade, non leak, electrostatic stable vials • Suitable for normal measuring • Sturdy box section construction • 2 permanently fixed vials for lasting accuracy70TMW/25

...setzt Maßstäbe...sets standards

$33

Hybrid Multiline and Plumb Dot Laser• Ultra bright horizontal and vertical lines • 3 x pinpoint plumb up/down and forward dots • 2 year warranty • Accessories to mount on tripods, metal/timber studs, and walls included • Comes in tough carry case with laser glasses and target. DLD3

Auto Levelling Laser Level• Built in wall/side mount bracket • Professional LCD receiver, target, and glasses included • 240 metre range • 5 year warranty. ARL509

super deal

Professional Trades Laser Level• Horizontal and vertical auto levelling • Grade matching technology with remote control for drainage • Indoor scan lines for fitout • Professional LCD receiver, rechargeable battery, charger, target, glasses all included • 5 year warranty. EGL624

$269

$549 $1099unit onlywith

tripod & staff$1199

1200mm Big Boss Level with Bag• Over sized centre bubble ensures clear and easy reading • Dual line on bubble for 1° slope feature - great for setting/measuring run off • Double milled surface ensures accuracy • 3 vials - 1 x 180° & 2 x 90° • Highly accurate with 0.5mm/m accuracy • Includes nylon carry bag to protect the level. LBBL120

8m Tape Measure Flurolok Metric • Extended tape mouth, Hi-vis case • Yellow blade graduated in mm on both edges • Removable belt clip. 100192Also Available:FL48ME10 8m Tape Flurolok Met/AF $21.95

$2195

$44Video Borescope with 9mm Diameter Camera• 2.4" colour TFT LCD screen • Flexible, waterproof gooseneck imager head that easily performs visual inspections in hard to reach areas • High visibility and 6 degree adjustable LED lighting • Rechargeable battery with USB cable. SP70925Also Available:SP70935 High Res Video Borescope with 6mm Camera $425

$189

Precision Engineer Graduated Square• Made from stainless steel • Precision 90º

Part No Size Price267SG1004 100mm $16.00267SG1006 150mm $22.00267SG1008 200mm $29.00

$16FROM

8m Tylon Tape Measure• Tylon™ Blade coating gives greater durability/wear resistance than lacquer • Matt finish blade reduces glare/reflection • Compact and ergonomic bi material case • Tru zero hook moves to compensate for accurate inside and outside measurements 30-393Also Available: 30-394 Imperial 8m/26ft $9.95

30m Extreme Tape Measure• Automatic blade retraction • Rust resistant coating for long blade life• Slide lock securely hold blade in position• Steel and aluminium construction for durability. XTHT34204

FatMax Hi-Vis Vest

FMHIVISVEST

bonus

$6995

$995

150mm Digital Vernier Caliper• Metric, imperial & fractional display • Auto off feature - 5 minutes • Zero setting in any position • Large easy to read LCD screen. K11100Part No Size PriceK11102 200mm $119.95K11103 300mm $199.95

$6995

EACH


serious storage

2 Door Storage Cupboard

• 1850H x 900W x 450Dmm

• Heavy duty • Flat pack

• 3 point lock system • 4 x shelves • Grey

2DSC4250Lt Flammable Liquid Cabinet• 1825H x 1100W x 500Dmm • Fully assembled & welded with double skin 1.0mm steel • 3 shelves • All cabinets comply to AS 1940-2004 • 9 x 20Lt drums. 2DFSC250Also Available:2DFSC160 160Lt 1295H x 1100W x 465Dmm $1599.00

1600mm Aluminium Gullwing Truck Box • Gullwing 2 door aluminium truck box • Dual T handle side mount locks • Stainless steel hinges • Dual gas struts. 51055

3 Drawer Aluminium Truck Box• Heavy duty 2.5mm aluminium chequer plate construction • Twin gas struts • Dual chrome plated drawer pulls • Welded construction • 3 divided drawers with water gutters51086

9 Drawer Custom Series Workshop Tool Cabinet• Timber workbench top • Cliklok drawer locking system • Heavy duty full extension ball bearing slides • Full roll cage frame for maximum durability • 760Lt storage capacity • 1540W x 560D x 790Hmm (795Hmm with castors). SP40070Also Available: SP40071 9 Drawer Custom Series Workshop Tool Cabinet - Stainless Steel Top $1995.00

2000mm Custom Series Workshop Bench

• Combination stainless steel/rubber work top • 3 lockable drawers • Load

capacity 2 tonnes • Can be bolted to the floor • 2000W x 645D x 872Hmm.

SP40400

Aluminium One Tonner Tool Box• Manufactured from 2mm, 3003 grade, aluminium checkerplate• Hinged angled lid, fully welded with T locks keyed alike • 1210W x 500D x 680Hmm. AL1210

super Deal

Steel Truck Box Sealed Bearing Slides• 2 large drawers with sealed bearing slides • T Handle keyed locking mechanism • Powder coated white gloss finish • 4 x heavy duty handles • 2 x gas struts

Part No Description PriceBKAT1210 1210W x 600D x 750Hmm $1049.00BKAT1500 1500W x 600D x 750Hmm $1299.00

Garage CreeperGC20

bonus

Sealed Bearing Slide

5pce Telescopic Mirror Set TM5

bonus

Heavy Duty Plastic Cases• Made from low linear density polyethylene (LLDPE) & long life UV rated • Water & dust resistant • Stainless steel handles, hinges & locks • Full rubber seal around lid • Heavy duty handles • 550D x 400Hmm (OD)

Part No Size PriceHDCASE600 600Wmm $199.00HDCASE900 900Wmm $259.00HDCASE1200 1200Wmm $299.00

5pce Telescopic Mirror Set TM5

(with HDCASE1200 only)

bonus

BKAT1210

$219$1999

$499

$549 $1895

$595

$1049 $539

$199FROM


15


SeriouS trade toolS

super deal

2 Drawer Vehicle Drawer System• Heavy duty construction • Fully assembled • Heavy duty lockable drawer handles • Drawer load capacity - 100kg • Universal fit (suits most popular large vehicles). 51000

Sortmaster Organiser• Unique angled corners accommodate angled tools such as hammers • Removable dividers - allows combination of tools and small parts storage • Top lid lock - keep contents secure inside • Tools not included. 1-94-745

Round Top Tool Bag• The ultimate huge capacity tool carrier! • Easy access pockets • Rigid construction maintains shape • Multiple tool compartments for various tool types. Huge capacity. SCMT50001

50cm Tool Bag Plastic Fabric Tote with Cover• Multiple internal and external pockets provides maximum organization • Strong injected polypropylene frame • Open bulky structure design • Covered front pockets secure storage of small parts or personal items • Tools not included1-79-213

Fat Max Back Pack on Wheels• Removable divider with multiple pockets for tools • Telescopic transporting handle • Separate compartment for power tool or laptop • Tools not included1-79-215

6 Drawer Premium Tool Chest• Smooth drawer action even when fully loaded • Easier to remove drawers• Large ball bearings ensure effortless drawer action • Industrial Gas Struts• 100% drawer extension allows full access to tools. SCMT50246

7 Drawer Premium Roller Cabinet• Auto return slides ensure smooth drawer action even when fully loaded • 100% drawer extension allows full access to tools • Heavy gauge steel on critical sections of chest • Heavy duty 5” castors with foot brake for maximum mobilitySCMT50247

Professional Deep Organiser• High impact, break resistant crystal clear lid • Unique lid design keeps storage cups locked in place • Large, deep cups for easy access to small items • Extra wide handle designed for gloved hands. 1-94-203

9 Drawer Pro Series Tool Chest• OD 660W x 305D x 420Hmm, 1 x drawer 575W x 265D x 66Hmm, 2 x drawers 575W x 265D x 51Hmm, 6 x drawers 170W x 265D x 51Hmm, 1 tray 440W x 180D x 82Hmm • Doubled walled fabrication and rolled edge construction • Tough industrial powder coating - black colour • Ball bearing slides • Aluminium draw handles for easy grip • Includes drawer liners • Lockable. 710823

7 Drawer Pro Series Roller Cabinet• OD 685W x 465D x 955Hmm, 2 x drawers 584W x 380D x 153Hmm, 5 x drawers 584W x 380D x 74Hmm • Heavy gauge sheet steel • Tough industrial powder coating - black colour • Ball bearing slides • Aluminium draw handles for easy grip • Includes drawer liners & top mat • 125kg castors. 710817

Heavy Duty Site Box• OD 1219W x 610D x 700Hmm • Fully welded for maximum strength • Heavy gauge sheet steel 1.4mm thick • Tough industrial powder coating - yellow colour • Recessed tube side handles and front locking area • Full length piano hinge lid • Gas strut lid. 710832

$1399

$679

$299

$2995

$1995

$8590

$79

$360

$199

$435 $69


serious lubrication

Part No Description Size Price45040 Bulk Liquid 4Lt $39.9561009 Smart Straw 350g $8.95

WD-40• Protects metal from rust and corrosion • Penetrates stuck parts • Displaces moisture • Lubricates just about anything • Great for removing grease, grime, rust, and other marks from most surfaces.

Penetrating Catalyst• PB Blaster Penetrating Catalyst (16 PB) eliminates fighting with rusted nuts and frozen parts. Penetrates rust to break the surface tension and quickly free the rusted or immobilized part. 16PBAlso Available: 16CNC Cut ‘N Cool (16 CNC) Blaster Cut ‘N Cool is recommended blaster for carbon steels, cast iron, aluminium, stainless steel, aircraft steel and all other materials $19.60

Oil Transfer Kit with Meter• 3:1 ratio pump, 3m x 1/2” ID hydraulic hose and electronic resettable meter • Transfer rates of up to 15LPM • 3/4" BSP (f) material outlet • 1/4” BSP (f) air inlet • Suitable for engine, gear, diff and hydraulic oils • Suits 60 or 205Lt drums • 454111N available as above but with on/off control valve. 454110N

super Deal

200Lt Diesel Fuel Storage & Dispensing Kit• Dispensing kit consists of a 12V pump, 4m antistatic fuel delivery hose, 2m battery cables and automatic nozzle • Patented self priming rotary vane pump manufactured in Italy is capable of delivery rates of up to 50 L/min • 200Lt capacity polyethylene tank weighing just 32kg cannot dent, scratch or corrode • Baffles aid stability and therefore vehicle handling and safety • Tank dimensions of: 800mm (W) x 800mm (D) x 635mm (H). 20040PAAlso Available: 40040PA 400Lt $1099.0060068PA 600Lt $1749.00

12V Diesel Refuelling Kit• Capable of flow rates of up to 50 L/min • Includes 4m of antistatic fuel delivery hose, 2m of battery cable, a stainless steel & brass fuel filter and a manual nozzle • Maximum head capacity of 15m • Self priming rotary vane pump includes a built-in bypass • Duty cycle of 30min on, 30min off. 52000

Air Hose Reel• Impact resistant UV stabilised covers • Automatic & positive latching mechanism • 18m x 10mm ID hose & 0.9m lead in hose • Can be mounted on the floor, wall or ceiling • Adjustable spring tension & high flow swivel and fluid path. SA300N

20kg Air Operated Grease Kit with Trolley

• Includes trolley – ideal for busy workshops where

greasing is undertaken all day, every day • High pressure 55:1

ratio pump • Up to 7,950psi grease pressure • The heavy

duty air motor of external plastic components • Built in

filter protects against pump tube contamination. 424150

SECONDCOUPLER

14513

bonus

450g Trigger Action Grease Gun• Grease pressures of up to

8,500psi • Delivers up to 1.1g of grease per stroke • Coarse

thread on barrel assembly eliminates cross threading

during cartridge changeover • Unique twin lock system

• Patented ever-flow system • Three way loading • 4 jaw

coupler and flexible 30cm long extension. 660AN

made in germany

GPI 12V Diesel Refuelling Kit• Flow rate up to 57L/min • Automatic shut off nozzle • Use with diesel fuel (biodiesel blends B20) and kerosene. G-M-150S-AU

K53 Powerpistol™

• Delivery pressure up to 41,400 kPa (6,000psi) • Operates from only 0.028 m3/min (1 cfm) air supply

• Single shot only, one shot per trigger pull • Includes 230mm flexible extension & KY

SUPERGRIP™ couplerK53-01K45 Levergun™

• Delivery pressure up to 82,750kPa (12,000psi) • Includes rigid extension & KY SUPERGRIP™ coupler. K45-01

$899

$309$99

$1350

$1049

$229

$95

$1099

$470

$1890 $895FROM


17


SeriouS trade toolS

SeriouS compreSSorS

3HP Belt Drive Triple Cast Iron Compressor• 309L/min FAD • 60Lt Tank • 240V/15Amp • Triple cylinder compressor pump with cast iron crankshaft & cylinder • 150psi • Steel valve plate with stainless steel valves • Overload protection of electric motor with thermal relay. XRS18Also Available: XRS1800 100Lt Tank $1190.00

23cfm 7HP Diesel Compressor• 7HP Hailin diesel engine • 135psi • Electric start • 3 cylinder cast iron pump • 16.5cfm /466 LPM FAD • 112Lt tank • Slow revving • Skid mounted • No battery or lead. CD-70120DEAlso Available: CD-110120DE 11HP, 135psi, 120Lt tank $2499.00

Polyurethane Air Hose• 10mm x 20m polyurethane air hose fitted with Nitto type quick connect couplings. PUAIRA1020

Direct Drive Compressor• V twin direct drive compressor • 2.75HP motor • 115psi • 50Lt tank • Massive 205Lt free air delivery. RAV2.75/50

PHP15P 2 Stage Petrol Compressor• Free air delivery @ 150psi: 320L/min • 6.5HP Honda engine • 68 Lt air receiver • Pump RPM: 1236, Max psi: 175psi • Warranty: 5 year pump, 3 year Honda. 00101

Compact Gun Runner Oil Less Air Compressor• Free air delivery @ 100psi: 175L/min • 2HP single phase – 7Amp motor • 17Lt air receiver tank • Pump RPM: 1400 • Warranty: 1 year total unit. 00077

PHP52P Petrol Compressor - Electric Start• Free air delivery @ 150psi: 1040L/min • 13HP Honda engine • 150Lt air receiver • Pump RPM: 1020, Max psi: 175 • Warranty: 1 year pump, 3 year Honda. 00099

P17 Electric Belt Driven Compressor• Free air delivery @ 100psi: 320L/min • Pump RPM: 963 • 3.2HP, 240V – 15Amp motor • 55Lt air receiver • Warranty: 5 year pump, 1 year motor. 00087

super deal

P17P Petrol Compressor• Free air delivery @100psi: 350L/min • Pump RPM: 1,061 • 55Lt air receiver • 6.5HP Honda engine • Warranty: 5 year pump, 3 year Honda. 00128

PHP15FB Fatboy Compressor• Free air delivery @ 150psi: 300L/min • 3.2HP, single phase – 15Amp motor • Pump RPM: 1132 • Two stage – Max psi 175 • 110Lt air receiver • Warranty: 5 year pump, 1 year motor. 00105

Peerless Silent Series 52 Compressor• Free air delivery @ 150psi: 990L/min • 10HP, 3 phase motor • Low DB of 53 • Pump RPM: 949, Amps draw: 17, max psi: 175 • Warranty: 1 year total unit. 00113

Air Hose00348

bonus

$1799

$4100

$1349 $2100 $5200

$1065$699$425

$4995

$2199

$995


serious generaTors & pumps

serious air Tools

1/2" Dr Air Impact Wrench• High torque max torque at 5 seconds: 1000ft/lb • Net weight: 2.6kg • Exceptionally quiet 87dBA • Q-Series • Twin hammer typeM7-NC4236QAlso Available:M7-NC6236Q 3/4" Dr, 1200ft/lb $479.00

1/2" Dr Race Series Impact Wrench• Working torque: 780Nm • Max torque: 1100Nm • Bolt busting torque: 1600Nm • Super fast, high power 8 vane motor • 2 year warranty. SP-9145Also Available:SP-9150 3/4" Dr $945.00

1/2" Dr Ratchet Wrench• Tested in accordance with ISO standards • Length 254mm • Speed 160RPM • Hand torque 124ft/lbs • Air con 525L/min, max 158L/min Av. SP-1133SX-2Also Available:SP-1133SX 3/8" Dr $169.00

1.8mm Nozzle High Pressure Spray Gun• 1Lt pot • Pressure: 50psi • Weight: 1.22kgSX60-2

3.2HP Inverter Generator• Max 2000W, rated 1600W • From 52dB(A) • 4.1Lt tank capacity • Pull start • Powered by Torini engine • 3 year warranty. Ti2000

SMD LED Light T81470

bonus

5" Angle Grinder• M14 thread • Polymer grip • 10000RPM free speed • 12 months factory warranty. SI2515LA

Needle Scaler• Pistol grip • Ergonomic polymer grip • 3500bpm • 12 months factory warrantySI4160

super Deal

8.5kVA Diesel Generator• Powered by 12.5HP Kohler diesel engine • 27Lt tank • Electric start • Weight 165kg

• Reliable power for the most demanding applications. TD85KSRE

3.4kVA Petrol Generator• Powered by a GX200 Honda engine with recoil start • 3.6Lt fuel tank • Hard working, light weight • Quiet operation, smooth running, powerful performance • Ideal for domestic use & camping applications. TP34HSR

7kVA Petrol Generator• Tradesman’s choice • Powered by reliable 'one-pull' Honda GX390 engine • NSM alternator/recoil start • 6.5Lt fuel tank • Economical/hardworking - lots of watts! TP70HSR

8kVA Petrol Generator• Powered by GX390 Honda engine • Fitted with 2 x 15Amp IP56 RCD protected outlets • Raised wheel kit, levelling feet, extendable handles, centre point lift • Provides easy manoeuvrability! • Portable power where YOU want it! TP80HIRE

$379

$375

$169 $59

$995

$385 $489

$7390

$1799$995 $2390


19


SeriouS trade toolS

SeriouS cleaning power

Poseidon 4-29XT Cold Water Pressure Cleaner• Inbuilt chemical injector with 4Lt tank • 15m hose reel and turbo lance • 2320psi pressure • Includes Flexopower lance and Turbohammer lance • 9.3L/min – 10.3L/min water flow301003110

Poseidon 2-32PE Pressure Cleaner• 2400psi pressure • 10.4L/min water pressure (QMAX) • 5HP Honda GC motor • Thermo sensor - prevents over heating in by-pass • Robust long life pumps with ceramic pistons • 8m hp hoseHC2400HA\G-KEW

new

Professional Petrol Pressure Cleaner• 4000psi 15L/min • Genuine Honda GX390 petrol engine, with heavy duty Italian comet plunger pump direct drive • External unloader valve with thermal relief protection • Supplied ready with 15m hose, gun/lance and nozzle kit. BAR4013-H

Hobby Cold Water Electric Pressure Washer

• 2175psi @ 8L/min flow rate • 240V 10Amp motor, can be used

on all house hold supplies • High pressure pump made by Comet Italy,

with brass head • Instant total stop shutdown protection. KL1600A

super deal

Semi Professional Hot Water High Pressure Cleaner• 0-90˚ C max water temperature • Diesel fired burner • 240V, 2kW, 15Amp electric motor • Comet Italian Axial pump with brass head • 10m hose with hose reel, and accessoriesScout 150 extra

Hobby Pressure

Washer H1510

bonus

5m Extension Hose RPPWH5M

bonus

2600psi Petrol Pressure Washer• 2600psi petrol • 5HP • Stainless steel lance • Maintenance free, heavy duty pump • Dual detergent dispenser bottles • 5 interchangeable nozzles. 6m hoseRPPW2600

TW20 5Lt Truck Wash• PH Neutral, safe on paintwork

• Concentrated heavy duty cleaner • Biodegradable, Quick Break

• Non- caustic, non-toxic • Removes road grime, oil, mud and soot from vehicle exteriors. ATTW5

Also Available: ATTW20 20Lt $65.00

1152TST High Pressure

Cleaner• 1885psi @ 10L/min

• Easy start technology – motor starts without load

• Self supporting frame, one piece injection moulded,

extremely strong and torsion resistant • Leakage return

system • Total stop system • 2 yr industrial warranty

on unit, 10 yrs on brass pump headKM412181

2+2 Sweeper• Contra-rotating sweeper roller • 2 rotating feeder brushes • Guarantees optimum cleaning performance • 800mm cleaning width • Only weighs 16kg • Stop wasting time sweeping with a broom! KM50076

PowerJet 110S Cold Water High Pressure Cleaner• 110 bar (1600psi) @ 6L/min • 2800RPM induction motor • Total stop function when trigger released • Trigger gun, variable fan lance and 8m high pressure hose • Rubber tyred wheels and impact resistant ABS cover • Unique 'Duralloy' aluminium pump headPJ110S

made in germany

made in germany

$2250

$899

$499$2499

$2499$550

$2295$1495 $799

$450


SerIouS weldIng geAr

TIGGA Welding Glove• Durable deerskin leather • Kevlar stitching • 34cm in length • Sizes L & XL • Ideal for TIG welders. TIGW13

Bossweld AC/DC 208 TIG 240V Digital Welder• Digital AC/DC welding inverter • Includes: power source, quality lead set, TIG torch, argon regulator • TIG welding aluminium alloys, as well as stick • Welding amperage from 5Amp up to 160Amp • Duty Cycle at 40% = 200Amp Duty Cycle at 60% = 165Amp Duty Cycle at 100% = 130Amp • Digital controller • Pulse function • IGBT technology • Up and down slope control • Single phase 240V 50 HZ • 15Amp plug fitted. 600208

Bossweld Treo 175Amp 240V MIG/Stick/TIG Welder• Suitable for MIG welding with gasless shielded gasless wires • Synergic control • ARC welding up to 4.0mm electrodes • DC TIG welding • Voltage Reduction Device (VRD) in stick mode • Light weight and portable. 600550

Weldmatic 270C 270Amp Compact MIG Package• Compact MIG with full featured integrated wire feeder – including creep, latch and purge • Fillet weld up to 12mm of mild steel, stainless or aluminium • Heavy-duty 4RD drive system for ultimate reliability • 3 Year Gold Shield warranty, including parts & labour. CP136-1

MIG Welder Trolley• Trolley to suit MIG 180/190/210 and many more other small welders. Gas bottle holder - storage shelf and torch holderUMJRTROLLEY2

MiniMig Welding Machine• Thermal overload protection • Fan cooled • Single phase 240V • 35-180Amp • 1-5kg spool capacity • Fully compliant to AS 60974 • Gas / Gasless • Euro connect torch • Spool gun ready • 1 roll gas wire • 1 roll gas less wire • 2yr warranty. KMM180

MIG/MMA/TIG 190Amp Inverter• Latest IGBT inverter technology • Multifunction inverter - MIG - DC TIG (with lift arc ignition) - MMA • Spool gun ready • Digital voltage & amperage meters • Voltage reduction device (VRD) • Geared wire drive • Comes with MIG torch, arc leads, twin gauge, argon regulator and gas hose. KUMJR190

200Amp MIG/MMA/TIG Inverter Welder• Latest IGBT inverter technology • MIG/MAG with gasless wire function • MMA (Stick electrode) (DC+ / DC-) function • Digital Volt/Amp meter display • Spool gun ready • Industrial application • High strength metal case construction • Internal gear drive wire feeder for 5kg & 15kg spool • Euro style MIG torch connection • IP21S rating for environmental / safety protection • Stepless voltage and wire feed control • Scratch start DC TIG welding • Excellent arc stability for MIG / MMA / TIG welding • Light weight and portable • Wire inch and burn back functions. KUMJR200KAlso Available: KUMJR250K $1299.00

SITECUT10 Plasma Cutter• No HF system, which can damage or interfere with electronics • Post flow cooling provides torch cooling after the cut for longer torch life. Automatic post-flow stop for rapid re-striking • Safety pins deactivate the torch when consumables are removed • Compact & ergonomic • Pilot arc control facilitates uninterrupted cutting on expanded metal or grating • Easy access at the compressor air filter for easy cleaning • Automatic pilot arc control below than 10Amp facilitates overlapped metal sheets cuttingSITECUT10

Built in compressor

$1695

$999$1395

$1790

$990

$399

$1049

$8990

$1150

$1299supertooltoolSAlESALE

21


SeriouS trade toolS

Bossweld Gasless GS MIG Wire x 0.9mm x 4.5kg• Self shielded flux core wire • Suitable for single pass applications • Smooth arc action DC • No shielding gas required. 200345Also Available: 200343 0.8mm x 4.5kg $79.00

RETRACTA® Oxy/Acetylene Gas Reel - Spring-Rewind• Fitted with twin 15m x 5mm i.d. reinforced hose • Operating pressure up to 1400 kPa (200 psi) • 5/8” UNF(M) reel inlets and 5/8” UNF (F) hose outlets • Complete with carry handle and mounting bracket. OA2551

WIA Blue Auto- Darkening Helmet• Designed for light industrial, maintenance /repair, rural applications & DIY • High impact rating ANSI Z87.1-2003 • Replaceable battery • Magnifying lens compatible • Grind mode. 235620

Digital Elite Auto-Darkening Helmet• 3 year warranty • Complies with Australian Standards AS/NZ 1337.1, AS/NZ 1338.1 (High Impact) • Four operating modes - weld, cut, grind and X-Mode for outdoors and out-of position welding • Lightweight headgear design. 257214

Cover Lenses, Inside Cover Lens

& Helmet Bag

bonus

new

super deal

Weldmatic 190 MIG Welding Package• Suits light fabrication work, rural workshops, hire fleets and the home user • Fillet weld up to 8mm steel, stainless steel and aluminium • Includes starter Kit: MIG gun, regulator, drive rollers and tips • 3 year gold shield warranty, including parts and labourCP131-0

MOBILe GAs

BOttLe trOLLey

AM340

bonus

170CA MMA/TIG Welding Machine• Suitable for a wide range of applications • Built to our specification and manufactured in compliance to AS/NZ60974.1 • Hot start • Anti stick • Arc force • MMA (Stick electrode) (DC+ / DC-) • DC TIG Welding • TIG Lift ARC ignition • Thermal overload protection • Generator compatible • Tolerant to variable supply power • 35/50 Lead connectors • 3yr warranty. KUMJr170CA

Graphic Auto- Darkening Welding Helmet• Viewing area 96 x 42 mm • Helmet 9-13 variable • Reaction time 1-10000 sec • Adjustable Reopening delay 0.1-0.9 sec • 24 month warranty. UMGWH

Razorback Welding Grinding Helmet• Filter dimension 114 x 133 x 9mm • View size 100 x 60mm • Sensors 4 • Shade number 4/9-13 • Shade control internal • Switching time 0.1ms(CE) / 0.05ms (ANSI) • Sensitivity & delay time control adjustable (Internal) • Delay time from dark to light 0.1-0.9s adjustable • Operation temperature 10ºC-55ºC • Grinding function 1-13 adjustable • Warranty 2 years. UMrBWH

Antispatter Spray• Silicone free • Benzene free • Non flammable As400

Oxy/Acetylene Kit with 4 Flashback Arrestors• Heavy duty tool box • 1 x oxygen regulator • 1 x blowpipe • 1 x acetylene regulator • 1 x cutting attachment. KKOXy-1Also Available: KKOXy-2 Deluxe OXY LPG KIT with 4 flashback arrestors $475.00

Industrial Fume Arm• Extracts Dust and Fumes • Duct

extension up to 3 metres • 150mm Fan outlet • 240V Power supply. IFA-160-3

Ground Clamp• 200Amp • Connects instantly. No more searching for a clamp location • No more tacking on tabs in large sheet weld or pipe jobs • Stays clean - turn off Magswitch and wipe away debris • Attaches to flat or round surfaces 4932352563Part No Description Price 4932352564 300Amp $49.004932352565 600Amp $99.00

$75

$550

$990 $129

$385

$279$450

$99

$149

$995

$1285

$33


serious safety gear

Protecta® Grit Industrial Hand Cleaner• Contains pumice • Fast working • Contains moisturisers to help prevent dry skin • Removes ingrained oil, grease, coal dust, carbon and most industrial soils

Part No Size PriceIHPG500R 500g $6.50IHPG4 4Lt $29.95IHPG20 20Lt $109.00

$650FROM 500ml Heavy Duty

Liquid Hand Cleaner Squeeze Pack• Hard on dirt, kind on skin • Cut through grease and grime on hands and body • Scrubbing granules + citrus oils • Moisturising + pH balanced for everyday use. 71050Also Available:71026 4.5Lt Pump $34.95

$695

Raptor• ‘ALS’ anti-fog/anti-scratch coating on both sides of Clear and Smoke lenses

Part No Description Price1613101 Clear Lens $19.951613102 Smoke Lens $19.951613103 Silver Flash Lens $24.95

Sidewinder• Half frame, dual lens design providing extensive eye coverage • ‘ALS’ anti-fog/anti-scratch coating on both sides of Clear, Smoke, Amber and Bronze lenses

Part No Description Price1615501 Clear Lens $19.951615502 Smoke Lens $19.951615503 Amber Lens $19.951615504 ESP Lens $22.951615505 Bronze Lens $19.951652107 Grey Polarised Lens $52.00

Dark Gun Metal Frame Clear Lens• High gloss, dark gun metal dual material frame (polycarbonate frame front and hydrated nylon temple arms) • Rubber nose pads and temple tip inserts for superior comfort and a non-slip fit • Exceptional visual clarity through an 8 base curve, distortion free lens • Integrated, lower frame ‘eye guard’ to prevent contaminants entering the eye from the cheek area

Voodoo Smoke Lens• Translucent smoke or brown polycarbonate frame • Rubber nose pads and EVA temple tip inserts for improved grip and comfort • ‘ALS’ anti-fog/anti-scratch coating on both sides of Smoke and Brown lenses • Exceptional visual clarity through an 8 base curve, distortion free lens • Fit: Unisex - medium / large. 1652702Part No Description Price1652705 Brown Frame / Lens $24.951652707 Smoke Polarised Lens $62.001652719 Brown Polarised Lens $62.00

Sidewinder

Raptor

$2495

Tsunami Clear Lens Spec• Clear lens • Medium impact • Ultra lightweight • 99.9% UV protection for outdoor wear. 1600Also Available:1602 Smoke Lens Spec 12 for $39 / $3.90 each

3700 Series Goggle• Clear lens • Medium impact, anti-scratch lens • Anti-fog, hardened 2mm lens • Foam bound with wide strap for comfort • 99.9% UV protection for outdoor wear. 3700

$1490 $39$3.90 ea

pack of 12

ProBand Headband Earplugs• Class 2, SLC80 14dB • Comfortable, convenient and lightweight • Hearing protection for noise levels to 95dB(A) • Earpads are disposable • Sold individually. HBEP

$850

1.5kg ABE Fire Extinguisher• 1.5kg dry chemical powder ABE extinguisher • Certified and approved to AS/NZS 1841.5 • Fire rating 2A:30B:E • Weight: 3.6kg. FB15ABEAlso Available:FB10X10 1m x 1m Fire Blanket $12.50

$3490

super Deal

Basic Harness c/w 2m Integrated Lanyard• Polyester webbing, 2m shock absorbing lanyard • Zinc plated forged rear dee with stand out feature • Zinc plated forged 2 bar 3 bar buckles • Colour fast webbing • Double action hook f/w anti roll out device • Labelling fully protected by clear PVCBH01151

$149$169

T Bar Roof Anchor• Right angle plate to clamp securely to roof edge • Screws down to roof for extra stability • Curved arm to suit corrugated roofs and tiled application. BSL5000

2.5m Self Retracting Lanyard• Built in shock absorber • Inertia style

locking device designed to limit free fall • Complete with 10mm steel

screw gate karabiner at each end • Weight: 1.2kg.

BL05332.5

$199

super Deal

$299Roofers Backpack Kit• Full kit for working on and around roofs • Kit consists of: 15m safety line, manual rope adjuster, 1.5m anchor strap, karabiner, 2m shock absorbing lanyard, harness with front and rear attachment points • Backpack for clean storage • Ease of use and set up • All components fully compatible. BK061015


23


SeriouS trade toolS

National Workplace First Aid Kit - Toolbox• Workplace guide: standard workplace with up to 100 staff, construction sites with up to 25 staff • Innovative easy to use 5 module set • Portable toolbox style • Durable polypropelene construction • Comprehensive maintenance check list • Also available as wall mountable or portable soft case. FAWTB

$199

Hard Shell Knee Pads• Hard shell cap • Adjustable straps • Double strap design. R-322

$29

Hi-Vis Latex Foam Glove• Latex foam coating • Anti static liner • Excellent grip in wet and dry environments • Hi-vis yellow for increased visibility • Sizes 8,9,10,11. LFN(size)

$39$3.90 ea

pack of 12

P2 Respirator with Exhalation Valve• P2 rating for protection against mechanically and thermally generated particles • Exhalation ProValve for extra air flow • Colour coded nose-piece and packaging • Latex free dual strapsPC321

Cobra Earmuffs• Class 5, SLC80 28dB • General purpose use

• Hearing protection for noise levels to 110dB(A) • Low clapping force for

increased comfortEMCOB

Bunting• Hi-vis fluro PVC triangle flags

• 30 metre length • Reuseable hi strength nylon rope • 45 flags. BUN30

$1650

$2495

$2795box of 12

super deal

3108 Locking Single Carabiner• Stretch cord surrounded by tubular nylon webbing • Lock stitching at both ends for extra security • Heavy-duty (500kgf) self-locking carabiner • Adjustable barrel lock for tool attachment • Maximum safe working capacity: 10lb (4.6kg) • Short: 28" to 35" (71-89cm)19008

Part No Description Price19023 3110 Dual Carabiner $19.9019066 3103 Kit - Detachable Loops $7.2019150 3150 Buckle Hard Hat Lanyard $9.00

3102 Detachable Single Carabiner

• Stretch cord surrounded by tubular nylon webbing • Lock stitching at

both ends for extra security • Aluminium carabiner • Adjustable barrel lock for

tool attachment • Quick connect buckle • Compatible with 3103: Detachable lanyard loops

• Maximum safe working capacity: 5lb (2.26kg) • Standard 35"-42" (89-107cm) • Tool not included

19063

$30

$19

$199Contego Rigger Gloves• 0.8mm premium breathable synthetic leather palm • Four way stretch spandex for full movement• Machine washable • Black Neoprene knuckle bar• Sizes: S - 2XL. P8175(SIZE)

Cowhide Rigger Glove• A/B grade cow hide palm & back • Wing thumb • Length 250mm • In sewn elastic • Sizes S-2XL P031B(SIZE)

$75$7.50 ea

pack of 12

$55$4.95 ea

pack of 12

SMS Disposable Overalls• Also available in white and orange • Breathable 55gsm, disposable overall made from SMS material • Anitistatic, electrostatic • Low Lint • Liquid repellant to Type 6 light spray and splash • Dry particle to Type 5 hazardous dust and dry particles. FME38

Orange Hi-Vis Traffic Cones with Reflective Band• High quality orange PVC • Provides even greater visibility • 450mm Height • 150mm Reflective tape complies to AS/NZS 1906.1:2007 • High Intensity reflective tape • Sold individually. TM-450RAlso Available:TM-700R 700mm HeightPack of 6 $129.00 / $25.00 each

$495

$78$14.90 ea

pack of 6


serious workshop gear

6 Pack Magnetic Base Drill Cutters• Australian made high quality high speed cutters • No tools needed for replacement when used with Atra Ace drilling machines • Fits most magnetic based drills • Contains 1 x 14mm x 25mm, 2 x 18mm x 25mm, 2 x 22mm x 25mm & 1 x 26mm x 25mm • Other sizes available for individual sale. OT6PACK

TM

super Deal

Atra Ace Manual Feed Magnetic Drill• Improved overload detection with LED indicator • Advanced motor design • Magnet switch protector • Fail-safe restart • Powerful drill 450RPM (free speed) • Drills up to 32mm diameter through 50mm plate thicknessWO-3250A

3 Free Ozbroach HSS Cutters (16, 18 & 22mm x

25mm) & One-Touch Chuck

bonus

Free Large Cooler Bag

bonus

new model

8” Swivel Bow Workshop Bandsaw• All cast iron frame and bed • Hydraulic down feed control with infinitely variable adjustment • Quick release vice and swivel cutting head from -45° to +45° • Cutting capacity at 90° = 205 x 215mm • Cutting capacity at 45° = 143 x 115mm • 240V 1.1kW motor. BS8SW

100mm Portable Bandsaw• Suitable for steel, non-ferous, plastics, wood etc • Full aluminium construction for easy, portable use only 20kg • Electronic infinitely variable speed 1.8kW DC Motor • 0° to 45° cutting angle • Cutting capacity at 0° = 100mm • Cutting capacity at 45° = 55mm BSAW100

20mm Capacity Industrial Bench Drill• 240V 550W aluminium TEFC motor • Square table for larger work area, tilt and rotate • Column and quill precision machined from thick wall tube for extra rigidity • Worklight, emergency stop switch, chuck safety guard, heavy duty precision depth stop all standard • Spindle taper = MT2 • Capacity 20mm, 16mm chuck, 12 speed. DB20

25mm Capacity Industrial Pedestal Drill• 240V 750W aluminium TEFC Motor • Square table for larger work area, tilt and rotate • Column and quill precision machined from thick wall tube for extra rigidity • Worklight, emergency stop switch, chuck safety guard, heavy duty precision depth stop all standard • Spindle taper = MT3 • Capacity 25mm, 16mm chuck, 12 speedDP25

32mm Capacity Industrial Pedestal Drill• 240V 1100W aluminium TEFC motor • Square table for larger work area, tilt and rotate • Column and quill precision machined from thick wall tube for extra rigidity • Worklight, emergency stop switch, chuck safety guard, heavy duty precision depth stop all standard • Spindle taper = MT4 • Capacity 32mm, 16mm chuck, 12 speed. DP32

Pro 40 Magnetic Base Drill• Durable & versatile • European made machine • 40mm diameter, 52mm depth cutter capacity • Optional 13mm twist drill chuck • Through cutter coolant system • 12.5kg. HMPRO40

®

Annular Cutter Set - 14, 16, 18, 20, 22mm ACSET-A

bonus

$1459

$1799

$489

$499 $699 $999

$339

$2095


25


SeriouS trade toolS

Rubber Ute Matting• 1830mm wide rubber ute matting • 10mm thick • Made from heavy duty natural rubber - UV stabilised. UTEMAT1830

75MT Industrial Shop Press

• Air/hydraulic press with gauge • Capacity

75MT • Total height 1910mm • Width

965mm • Leg length 800mm • Work

moving distance 150 – 910mm

• Net weight: 295kg 1242

100mm Mechanics Vice• Cast from close grained grey iron • Fully machined on all load bearing surfaces • Replaceable hardened steel jaws • Fused steel handle will bend before vice is stressed. 3Part No Size Price5 125mm $175.006 150mm $225.00

Forged Steel Utility Vice C/W Swivel Base - 100mm• Manufactured from forged steel • Pipe vice jaws • Large anvil • Corrosion resistant zinc plated handle. 60430

150mm Heavy Duty Industrial Bench Grinder• 280W - 25mm wide wheels ATBG280/6

Also Available:ATBG600/8 200mm Heavy duty industrial bench grinder • 200mm full 3/4 HP PLUS • The most powerful bench grinder in its class • Fully adjustable tool rests $199.00

Linishing Attachment• Multitool 362 (attachment only)

• Belt size 915 x 50mm • Suits most 150 & 200mm

bench grinders. PO362

BS-48 - Belt Linisher Sander (240V)• 1.5kW / 2HP, 240V motor 2800RPM • 100mm x 1220mm belt size • Quick change belt system • Large 100 x 290mm working surface • Includes stand. L1185 / A8039

1220 x 50mm (48” x 2”) Zirconia

Linishing Belt Pack 80G

A8039

bonus

super deal

25pce Precision

Jobber Drill Set - HSS 1-13mm & Standard Drill Press

Vice 152mm

bonus

DMF-42 - Mill Drill - Pedestal Geared

& Tilting Head (240V)• 3MT spindle • Travels: (X) 370mm

(Y) 200mm (Z) 780mm • Tilting head ±90º • Drilling capacity 31.5mm • Includes: milling cutter, 16mm keyed drill chuck & arbor, chuck key to suit, drill drift tool to remove drill chuck or taper shank drills, safety cutter guard. D181A / D1271 / V126

AL-250G 240V Bench Lathe• 0.75kW / 1HP motor • 250 x 500mm • 26mm spindle bore • 12 spindle speeds • Includes: 130mm 3-jaw chuck with reverse jaws, faceplate, fixed & travelling steadies, change gears, dead centre, rear splash guard & swarf tray, safety chuck guard, leadscrew cover, instruction booklet & stand L149 / L150

4J-250G 4 Jaw Independent Lathe Chuck with Adaptor

Plate - 125mm (L151)

bonus

FREIGHT CHARGES

MAY APPLY

FREIGHT CHARGES

MAY APPLY

FREIGHT CHARGES

MAY APPLY

42mm Magnetic Drill• 1200W motor, 450 RPM • Weldon shank 19mm or 3/4” • Maximum cutting diameter 42mm with maximum cutting depth 50mm • Adjustable head • Comes in plastic carry case • Weight 10.9kg 702805

®

$795 $495

$2299

$2024

$125

$239 $175

$99$2695 $99p/mtr


serious workshop gear

serious ouTdoor gear

200mm Compact Air Blaster• Exhausts and supplies high volumes of air • Durable metal construction • 240V power supply • Portable and compact • Flexible ducting available. CAB200Also Available:CAB300 300mm Compact Air Blaster $260.00

2000W Quartz Radiant

Heater Pedestal• 3 heat settings • Quartz

heating element • Pull cord for safe operation • Vertical tilt adjustment • Odourless

ICH2PAlso Available:

ICH2W Quartz Radiant Heater Wall Mount 2000W

$154.00200mm Flexible Ducting• Suited to compact air blasters and other ventilation equipment • 5m lengths • Fire retardant • Strong and durable • Joining kits available. IFD200Also Available:IFD300 300mm Flexible Ducting $145.00

Heavy Duty Ball Bearing Slide• Heavy duty ball bearing slide 450mm (18”) • Full extension • Load rating 226kg per pair • Heavy drawers, toolboxes, vans, tradesman vehicles, battery packs requiring easy accessC9301-18

Chrome Compression Trigger Latch• Locking chrome plated compression latch • 102.8mm x 50mm • Toolboxes, vans, tradesman vehicles, metal cabinets prone to vibration. 10207B-CHR

Spark Plug Thread Repair Kit - 12 x 1.25mm• Includes: Tap, drill bit, installation tool, break-off tool and thread inserts • Fits 12 x 1.25mm spark plugs • Can be used in cast iron or aluminium heads • Includes 12 coils of varying lengths. CTRK12125Also Available: CTRK14125 14 x 1.25mm $74.95

Metric Bucket of Bolts• High tensile - grade 8.8 • 20 sizes - 940pce • Contains: nuts, flat washers, spring washers, bolts and set screws. BBMETAlso Available: BBIMP AF bucket of bolts & washers $99.00

Petrol Chainsaw 45cc• 18” oregon bar • Air-cooled 2 stroke engine • Automatic chain oiler • Easy start technology • Auto choke release • Safety chain brake • Oregon bar and chain • Anti vibration system. RGCS45CC

Tradesman Cement Mixer• 3.5 cu.ft (100Lt) capacity • Double belt driven mixer in powder coated steel • Heavy duty welded frame for extra strength • 1HP electric motor with poly pulley cover • Flat free tyresWMC3.5DPAlso Available:WMP3.5HON 3.5 cu.ft (100Lt) Tradesman Petrol Cement Mixer with 4HP Honda motor $1599.00

100Lt Poly Tray Wheelbarrow• 7.5" pneumatic wide wheel • Poly shockboard • Under tray steel supports and front supports. WM7002P

20m Retractable Water Hose Reel• 180° swivel rotation • Includes 20m hose & fittings • Automatic rewind • Convenient carry handle • Comes with removable wall or ground mountings • 12mm internal diameter hose. 701153

Petrol Power Cut • Uses straight, unleaded fuel • Low noise and clean exhaust emission • Low fuel consumption, low running cost • Low vibration system equipped with damper springs to absorb the vibration from engine to integrated front and rear handles - 2.7m/s² (front handle), 1.8 m/s² (rear handle) • Filter cover can be removed without using tool • Easy start-up. EK7651H

Heavy Duty Demolition Hammer 1350W• Input power: 1350W • 230V 50HZ • Impact force: 30J • Blow per minute: 1400min • Lithium based grease • Net weight: 15kg. 7133

$495$1495

$99

$1249

$139

$19995

$99

$6990

$18

$189

$198

$99

$125per pair


27


SeriouS trade toolS

SeriouS electrical

SeriouS paint & adheSiveS

12/24V Battery Booster• To start diesel engines up to 480HP without battery at 12V and up to an impressive 1500HP diesel engines without battery at 24V • Immediately powerful: at 12V: 2400CA, at 24V: 1200CA • Peak current: at 12V: 6200A, at 4: V 3100A. BB1224-1200AUZ

new

10m Extra Heavy Duty Extension Lead• 10 meter lead with neon safety light in socket • Clear 240V 10Amp plug and socket for safety inspection • Cable rating 15Amp • High visibility red extra duty heavy PVC sheath • Suitable for trade and construction sites. REL10Part No Size PriceREL15 15m $27.95REL20 20m $34.95REL30 30m $49.00

a World of Innovation

LED Voltage Detector• 50-1000V voltage range• CAT IV 1000V safety rating• Audible/visual voltage indicator• Green power 'on' indicator• On/off button• LED work light• Alkaline (AAA) battery• 1 year tool warranty • Pocket clip for easy storage • Length 6". 2202-20

12/24V Magnetic Base Rotating Beacon• Acrylic twist lock style lens • Belt driven for quiet operation • Stainless steel bearing for increased unit life. ACX2128

LED Worklight 18W Round• 10-30V 1.3A @ 12V 6 LEDsproducing 900 lumens • Diameter: 114 x 41mm deep - 2 bracket types supplied. 62-82001

Sand/Mining Flag & LED Light• 1.8m high complete with 10-30V red LED light & safety flag • Mounting option available: LIX60002 spring base. LIX60018Also Available:LIX60002 Sand Flag Spring Base $25.00

TreadRite Paint• Creates durable slip resistant surfaces • Easy to apply with uniform coverage • Resists cracking, peeling and exposure to petrol, oil and mild chemicals • Ideal for interior and exterior untreated timber, concrete, primed metal, brick clay pavers and pebble finish surfaces. Also available in black & clear

Part No Description Qty Price23063505 Yellow 350g 1 $9.9523060105 Yellow 1Lt 1 $29.9023060405 Yellow 4Lt 1 $89.90

Sikaflex PRO Grey 310ml Cartridge• High performance polyurethane joint sealant • Cuttable, sand-able and printable • Approved for use in potable water • Low VOC, environmental friendly formulation134220

Sikaflex Grey 11FC Industrial Adhesive/Sealant• High strength flexible adhesive/sealant in one • Cuttable, sandable and paintable • Interior and exterior. 134185

Industrial Markers • Ideal for all types of permanent marking • Available in 2 size nibs, 1.5mm bullet tip or 2-5mm chisel tip

Part No Description Size QTY/PK Price 117001 #17 Black 1.5mm Bullet Tip 12 $37.95 119001 #19 Black 2-5mm Chisel Tip 12 $37.95

Artline 400XF Paint Markers• Bullet nib with a 2.3mm line width • Xylene free • Can withstand up to 100°C temperature exposure • Fast drying • Valve action for controlled ink flow • Fade proof

Part No Colour QTY/PK Price140033 White 12 $69.95 140007 Yellow 12 $69.95 140001 Black 12 $69.95

Gal Finishing Paint • CG400: Cold Gal - a zinc rich single pack epoxy paint for long term protection. Replaces corroded or damaged galvanising. Other sizes available • SGAL400: Silva Gal 2 in 1 - an anti corrosive silver zinc paint. Ideal for touch up coating for weld areas of galvanised products. Other sizes available • BGAL400: Black Gal 2 in 1 - an anti corrosive black zinc paint containing metallic zinc and anti-corrosive pigments

Part No Size Each 12pkCG400 400g $11.95 $132.00SGAL400 400g $9.95 $99.00BGAL400 400g $9.95 $99.00

CG400 SGAL400 BGAL400

$99

$995FROM

$3795

$6995

$1650

$1450

$995FROM

$95

$75$79

$35$1995$750

www.aisnational.com.au


serious trade value

îs. 2

7130

superDEALDEAL see

page 2

SECONDCOUPLER

14513

bonus

450g Trigger Action Grease Gun

• Grease pressures of up to 8,500psi • Delivers up to 1.1g of

grease per stroke. 660AN

PHP15FB Fatboy Compressor• Free air delivery @ 150psi: 300L/min • 3.2HP, single phase – 15Amp motor • Warranty: 5 year pump, 1 year motor. 00105

Poseidon 2-32PE Petrol Powered Pressure Cleaner

• 2400psi pressure • 10.4L/min water pressure (QMAX) • Honda 5HP motor. HC2400HA\G-KEW

new

x100x5x10

4pce Heavy Duty Power Pack Kit• Kit includes: C18PD 13mm hammer drill/driver • C18ID 1/4" HEX impact driver • HD18AG heavy duty 115mm angle grinder • HD18HIW heavy duty 1/2" high torque wrench • 3 x 3.0Ah REDLITHIUM™ batteries. HD18PP4S-303B

WAR

RANT

Y CORDLESS LI-ION

5YEAR

TOOL

2YEARBATTERY

1200mm Big Boss Level with Bag• 3 vials - 1 x 180° & 2 x 90° • Over sized centre bubble ensures clear and easy reading • Rubber end cap protection. LBBL120

Air Hose00348

bonus125mm (5") 1080W Grinder &

Accessories Kit • 125mm angle

grinder • Cutting, Inox flap discs, wire brush and

diamond blade. W1080

see page 16

see page 13

see page 4

see page 19

new

150kg 8ft (2.4m) Double Sided Ladder• Heavy duty extruded aluminium construction with additional “Tri-brace” tread bracingFS13431

see page 6

see page 17

made in germany

$95$219

$949

$1349

$899

$289$44

Over 100 independently owned storeswww.aisnational.com.au

Aug_Sept_2013_M

Documents

Transcript of Aug_Sept_2013_M