ISSUE 11.1

AUGER SPECIFICATIONS

www.augertorque.com.au

AUGER TORQUE AUSTRALIA PTY LTD

Innovation

Featureswww.augertorque.com.au2

PilotsTOUGHNESS

Earth, Tungsten, Extra Dig and Rock Pilots

Tough forged construction Easy fi tting

Pilot ExtensionsACCURACY

Allows an auger to hold its axis accurately in tough ground conditions

Improves performance on sloping ground

Simple fi tting

UNIQUE

Shallow Pitch FlightsEFFICIENCY

Piling industry technology Holds earth on fl ights on removal

Most effi cient ratio between quantity of earth removed and speed of operation

“Don’t leave your teeth

down the hole!”Patented Design

Tooth Locking SystemSIMPLE, SAFE & SECURE

Unique to Auger Torque Lessens shock vibration Prolongs tooth life Avoids tooth loss Allows fast replacement Reliable technology with 100% customer satisfaction

International Patents: British Patent: 2404935

European Patent: 1507061

German Patent: 60 2004 009 250-9

Australian Patent: 2004203825

Canadian Patent: 2478443

US Patent: 7383901

Telescopic ExtensionsADAPTABILITY

Improves effi ciency for deep hole drilling

Innovative design signifi cantly reduces swap-over time

Easy adjustment to 3 heights Available for S5, S6 and PA augers

Constant Spiral CutIMPROVED PRODUCTIVITY

Fresh cut every revolution Tooth holders angled to direct spoil onto auger fl ights effi ciently

Spoil broken up thoroughly Avoids clogging

Interchangeable Wear PartsFLEXIBILITY

Shock LockTM Augers feature Tooth Holders which can take both earth and Tungsten Teeth.

Interchangeable pilots allow for differing ground conditions

Tooth Locking System

dPatented

3

Earth Drill 1200

100mm

All F

ully

Fligh

ted

150mm 200mm 225mm 250mm 300mm

Over

all L

engt

h 0.

9M

WEAR PARTS FOR GROUND CONDITIONS

EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.

HUB OPTIONS

S2 AUGERS With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.

Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to losing them again.

UNIQUE

DON’T LEAVE YOUR TEETH DOWN THE HOLE!

Tooth Locking System

50mm Round

StihlAttchments

S2/4 Shock LockTM

Earth Tooth33-9121-KIT

S2/4 Earth Pilot33-9203-KIT

S1/2/4 Shock LockTM

Tooth Holder33-1010

Pin & Clip50 Round 42-1055-KIT

EARTH WEAR PARTS EXTRAS

MICRO EXCAVATORS 0.75 - 1 T

Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.

www.augertorque.com.au4

With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.

Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.

S4 AUGERS

Earth Drill X2000Earth Drill ML2000

Earth Drill X1500 Earth Drill ML1500

Earth Drill X2500Earth Drill ML2500

Earth Drill 4500MAX

Earth Drill 3000MAXEarth Drill 3000TC

100mm

Fully

Flig

hted

950

mm

780m

m

750m

m

750m

m

700m

m

700m

m

675m

m

150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm 600mm

675m

m

625m

m

625m

m

625m

m

600m

m

600m

m

Over

all L

engt

h 1.2

M

UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!

Tooth Locking System

HUB OPTIONS

2” / 50mm Hex65mm Round

57mm Square

MINI EXCAVATORS 1 - 5 T, MINI LOADERS,SKIDSTEER LOADERS UP TO 80HP ANDTRUCK CRANES UP TO 9 T / METRE

Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.

Earth Drill 3500MAX

5

WEAR PARTS REQUIRED FOR GROUND CONDITIONS

EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.

FLAT TUNGSTEN (Shock LockTM)Best suited to soft abrasive grounds like sand, to help reduce wear.

FLAT TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Flat Tungsten Teeth. Improves cutting where low down pressure machines are being used, i.e. Mini Loaders, small Skid Steer Loaders & small Excavators. Must only be fi tted to the inside tooth holders with standard full width Flat Tungsten Teeth being fi tted on the outer most holders.

TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.

TUNGSTEN CHISEL (Shock LockTM)Used in conjunction with standard full width Tungsten Teeth. Improves cutting where low down pressure machines are being used, i.e. Mini Loaders, small Skid Steer Loaders & small Excavators. Must only be fi tted to the inside tooth holders with standard full width Tungsten Teeth being fi tted on the outer most holders.

EXTRA DIG PILOTA stronger Pilot for more demanding ground conditions.

800mm750mm700mm 900mm

525m

m

525m

m

525m

m

525m

m

500m

m

800m

m

1M

1.2M

S4 EXTENSIONS

All the Augers above are shown with Shock LockTM Tooth Holders.

* Overall Length given includes the auger fi tted with wear parts.

S2/4 Shock LockTM

Earth Tooth33-9121-KIT

S2/4 Earth Pilot33-9203-KIT

S4 Shock LockTM

Flat Tungsten Tooth33-9124-KIT

S4 Shock LockTM

Flat Tungsten Chisel33-9123-KIT

S4 Shock LockTM

Tungsten Tooth33-9122-KIT

S4 Shock LockTM

Tungsten Chisel33-9125-KIT

S4 Tungsten Pilot33-9204-KIT

S4Flat Tungsten Pilot33-9222-KIT

S1/2/4 Shock LockTM

Tooth Holder33-1010

Pin & Clip65 Round 30-0004-KIT

S4 Extra Dig Pilot33-9212-KIT

S4 Pilot Extension33-4106-KIT

S4 Drive Lugs33-4102 33-410533-4110

EARTH WEAR PARTS TUNGSTEN WEAR PARTS EXTRAS

Pin & Clip2” Hex 30-0003-KIT

1080

mm

977m

m

975m

m

965m

m

900m

m

900m

m

150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 550mm

900m

m

875m

m

750m

m

750m

m

750m

m

Over

all L

engt

h 1.5

m*

600mm

750m

m

75mm Square

2.5” / 63.5mm Hex

HUB OPTIONS

S5 AUGERS

Earth Drill 5000Earth Drill 5500MAX

Earth Drill 8000MAX

Earth Drill 7000Earth Drill 7000MAX

Earth Drill 7000TC

Earth Drill 5000TC

www.augertorque.com.au6 Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.

EXCAVATORS FROM 4.5 - 8 T, TELEHANDLERS, HIGH FLOW SKIDSTEER LOADERS, BACKHOES AND TRUCK CRANES FROM 9 - 18 T / METRE

With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.

Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.

UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!

Tooth Locking System

800mm750mm700mm 900mm 1M 1.2M

700m

m

700m

m

700m

m

700m

m

525m

m

525m

m

S5 EXTENSIONS

S5 TELESCOPIC

WEAR PARTS REQUIREDFOR GROUND CONDITIONSEARTH (Shock LockTM)Best suited to soft grounds like earth and clay.TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.

S5/6 Shock LockTM

Earth Tooth33-9126-KIT

S5/6 Earth Pilot33-9205-KIT

S5/6 Shock LockTM

Tungsten Tooth33-9127-KIT

S5/6 Rock Tooth33-9107

S5/6 Tungsten Pilot33-9206-KIT

S5/6 Shock LockTM

Tooth Holder33-1011

Pin & Clip57/75 Square 30-0002-KIT

S5/6 Rock Pilot33-9207-KIT

S5/6 Rock Tooth Holder33-1013

S5/6 Drive Socket1 3/4” Hex33-4103

EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS

1M

1.5M

2M

1.5M

2M

7

All the Augers above are shown with Shock LockTM Tooth Holders. Rock Teeth require a Rock Tooth version of the Auger.

* Overall Length given includes the auger fi tted with wear parts.

For Augers over 1M diameter please call our sales offi ce for further information.

Augers over 1M - special order up to 1.2M

875m

m

900m

m

1000

mm

700mm

1320

mm

1200

mm

1203

mm

1225

mm

1200

mm

1125

mm

150mm 200mm 225mm 250mm 300mm 350mm 375mm 400mm 450mm 500mm 600mm

1125

mm

1000

mm

1000

mm

Over

all L

engt

h 1.8

8M*

S6 AUGERS

Earth Drill 10 000

Earth Drill 25 000MAX

Earth Drill 12 000Earth Drill 12 000MAXEarth Drill 17 000MAX

HUB OPTIONS

75mm Square

Earth Drill 15 000 Earth Drill 15 000MAX Earth Drill 20 000MAX

www.augertorque.com.au8 Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.

With our patented Shock Lock™ Tooth Locking System tooth loss is now a thing of the past. Using the Shock Lock™ pin and rubber insert in our unique Shock Lock™ tooth holders ensures your Auger teeth are safely locked in place and protected against shock fractures.

Replacing worn teeth is a breeze with this system, simply knock out the old pin with a standard hole punch and the tooth will slide out of the holder with ease. Acclaimed as the best system on the market you will never need to worry about fi tting spare teeth due to loss again.

UNIQUEDON’T LEAVE YOUR TEETH DOWN THE HOLE!

Tooth Locking SystemEXCAVATORS & BACKHOES FROM 8 - 22 T

875m

m

800mm750mm 900mm 1M 1.2M 1.5M

700m

m

600m

mAugers of a larger diameter and length can be manufactured for use with these Earth Drills, but technical advice is required. Call one of our main offi ces for more details.

S5/6 Shock LockTM

Earth Tooth33-9126-KIT

S5/6 Earth Pilot33-9205-KIT

S5/6 Shock LockTM

Tungsten Tooth33-9127-KIT

S5/6 Rock Tooth33-9107

S5/6 Tungsten Pilot33-9206-KIT

S5/6 Shock LockTM

Tooth Holder33-1011

Pin & Clip57/75 Square 30-0002-KIT

S5/6 Rock Pilot33-9207-KIT

S5/6 Rock Tooth Holder33-1013

S5/6 Drive Socket1 3/4” Hex33-4103

EARTH WEAR PARTS ROCK WEAR PARTSTUNGSTEN WEAR PARTS EXTRAS

All the Augers above are shown with Shock LockTM Tooth Holders. Rock Teeth require a Rock Tooth version of the Auger.

* Overall Length given includes the auger fi tted with wear parts.

9

EARTH (Shock LockTM)Best suited to soft grounds like earth and clay.

WEAR PARTS FOR GROUND CONDITIONS

TUNGSTEN (Shock LockTM)Best used in dry, hard or medium ground conditions where fl oating rocks may be encountered. The perfect all-rounder if you are not sure about what you might encounter.

S6 EXTENSIONS

S6 TELESCOPIC

1.5M

2M

1.5M

2M

2.5M

3M

ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.

PA Augers are available in 2.3 metre or 3.3 metre lengths as standard - Please specify when ordering

800mm750mm700mm 900mm

Fully

Flig

hted

1558

mm

1527

mm

300mm 350mm 400mm 450mm 500mm 600mm

1446

mm

1446

mm

1446

mm

1433

mm

1321

mm

1321

mm

1321

mm

1321

mm

Over

all L

engt

h 2.

3M /

3.3M

*

www.augertorque.com.au10

PA AUGERS The PA Range of Augers are the most heavy-duty units available and are available in 2.3 metre and 3.3 metre lengths as standard. Fully fl ighted versions are available also.

Our standard PA Auger range has a maximum diameter of 1.5m however Augers with a diameter of up to 2.4m can be manufactured on request. Contact our sales offi ce for further information.

HUB OPTIONS

100mm Square and 130mm Square options are also available.

110mm Square

EXCAVATORS 17 - 45 T

Full technical details of the Earth Drills can be found in the Earth Drill Specifi cations book.

Earth Drill 30 000

Earth Drill 30 000MAX

Earth Drill 35 000MAX

Earth Drill 42 000MAX

Earth Drill 40 000 (Augers start from 700mm Diameter)

Earth Drill 50 000MAX

1M 1.2M 1.5M

971m

m

908m

m

750m

m

PA EXTENSIONS PA TELESCOPIC

2M

3M

2M

3M

11

PA Earth Tooth33-9108

PA RockTooth Holder33-1012

PA Rock Tooth33-9109

EARTH WEAR PARTS EXTRASROCK WEAR PARTS

PA Earth Pilot33-9208-KIT

PA Drive Socket33-4104

33-9209-1

33-9209-3

33-9209-2PA Rock Pilot33-9209-KIT

Pin & Clip110 Square 23-3900-KIT

LARGER AUGERSAugers of a larger diameter and length can be manufactured for use with these Earth Drills, but technical advice is required. Call one of our main offi ces for more details.

* Overall Length given includes the auger fi tted with wear parts.For Augers over 1.5 metres diameter please call one of our main offi ces for further information.

The PA Rock Pilot can be purchased in separate sections or as a whole assembly when buying replacement parts.

Augers over 1.5m - special order up to 2.4m

Augers over 1.5m - special order up to 2.2m

Augers over 1.5m - special order up to 1.8m

WEAR PARTS FOR GROUND CONDITIONS

EARTH (Taper Lock)Best suited to soft grounds like earth and clay.ROCK (Taper Lock)For very hard ground and tarmac where extra cutting is needed and high wear is expected. Most effective on machines with high down pressure.

TAHITI

NINGBO

BRISBANE

MELBOURNE

CHELTENHAM

FORT WAYNE

SYDNEY

YOUR NEAREST DEALER IS

Products and specifications subject to change without prior notice.

Some products may not be available in your country or region.

AUGER TORQUE, SHOCK LOCK™, NDS™ and the AUGER TORQUE LOGO are trademarks of Auger Torque Australia Pyt Ltd © 2013 Auger Torque Australia Pyt Ltd. All Rights Reserved.

Auger Torque Australasia / Pacific Region

Auger Torque Australia Pty LtdBrisbane - Australia

Tel: +61 (0)7 3274 2077 Fax: +61 (0)7 3274 5077Email: sales@augertorque.com.au

16071499-97111