Auction Brochure - Liquidation Auction - Equipment Auctions| HGP

1

GLOBAL ONLINE AUCTION: March 28, 2013 - 7:00 am PDT ENDING: March 29, 2013 - 10:00 am PDT

For additional information, contact Nick Dove • Phone +1.858.847.0659

CNC TURNING CENTER • CNC HORIZONTAL MACHINING CENTERS

for DCX 3.7L Cylinder Head (R/L Hand) 19.68” Twin Pallets, Travels: 24.80” XAxis, 24.80” Y-Axis, 27.95” Z-Axis, 16,000-RPM HSK Spindle, 40-Position ATC, KNOLL Chip Conveyor(7) 2000 MAKINO A88 CNC HORIZONTAL MACHINING CENTERS, 24.8” x 24.8” Twin Pallets, Travels: 35.1” X-Axis, 31.5” YAxis, 38.2” Z-Axis, Cat 50, 12,000-RPM Spindle, 90-Position ATC, Chip Conveyor, PROFESSIONAL 3 Control 2000 MAKINO CNC HORIZONTAL MACHINING CENTER, Model A88, S/N 135, 90-Position ATC, PROFESSIONAL 3Control (Parts / Repair) CNC MACHINING TOOLING(2,000+) CAT 50 & (500+) HSK Tool Holders(75) Machining Tool Fixtures(5) 50-Taper Tool Storage Cabinets, 64- Tool Capacity Each50-Taper Tool Cabinets & (14) Rolling CAT 50 Tool Carts

CNC TURNING CENTER2008 MORI SEIKI 5-AXIS CNC TURNING CENTER, Model NT4200DSG/1500, S/N NT420HA0169, Travels: 29.5” X-Axis, 8.3” Y-Axis, 44.1” Z-Axis, 2.5” Bar, 5,000- RPM Spindle, BT50 Tool Holder, 20-Position ATC, Chip Blaster Coolant System, MayFran Con-Sep 2000 Chip Conveyor, Mori Seiki MSX711 III Control

CNC HORIZONTALMACHINING CENTERS(8) 2007 MAKINO A81 CNC HORIZONTALMachining Centers,,, Model 24.8” x 24.8” Twin Pallets, Travels: 35.4” X-Axis, 31.5” YAxis,40.2” Z-Axis, 10,000-RPM Spindle, CAT 50 Spindle, MAYFRAN CON SEP 2000 Chip Conveyor, PROFESSIONAL 5 CNC Controls, (4) w/ CHIP BLASTER Filtration, 97-Position & 60-Position ATC’s Horizontal Machining Centers, Tooled

(8) MAKINO A81 CNC HORIZONTAL MACHINING CENTERS

(11) EX-CELL-O XHC241 CNC HORIZONTAL MACHINING CENTERS

(7) MAKINO A88 CNC HORIZONTAL MACHINING CENTERS

2007

3 OF 8

2004

2000

HENRY COOLANT FILTRATION SYSTEMS

2

LOCATION: 4415 Technology Drive, Fremont, CA 94538

To view a complete asset list, visit our website @ www.hgpauction.com

ASSEMBLY & TEST LINE • COOLANT FILTRATION • PARTS WASHERS

2004 KELCH KALI-TEC 3-STATION TOOLHEATER TOOL SETTERS: 2005 KELCH • PARLEC Series 2000 • PARLEC Series 1000 • REGO FIX & TOOL BOX (Bench-Top)

ASSEMBLY & TEST LINELAMB 4.6L & 5.4L FORD 4-VALVECYLINDER HEAD ASSEMBLY & TESTAUTOMATION LINE, - LAMB AutomatedConveyor System, Chain Drive, ALLENBRADLEY Panelview 600 Control, TELESISTECHNOLOGIES Marking Stations, Cylinder Head Leak Test Stations, (6) RTECH Vibratory Parts Feeders, (2) SPECTRUM Vibratory Parts Feeders, VALIANT ELAN 483.5 HP Unibor-ing High-Pressure Deburring System, ALLEN BRADLEY Panelview 1000e Control, (6) 2000 ABB Robot Stations w/Teach Pendant Controls, Model IRB6400 M98, S/N’s 64A-11006, 64A-11003, 64A- 10976, 64A-11004, 64A-10977, 64A- 11005, (40) LAMB Boring &

Reaming Stations w/Allen Bradley Panelview 550 Controls, Install Presses, Wash Stations, (1) TORIT ADMC-D10 40-HP Dust Collec-tor, S/N 1G636278, (2) TORIT 30- HP Dust Collectors, Model ADMC-AD8, S/N 1G635273 & 1G635278, (2) BEDATEC Coolant Pump & Filter Systems, Reject Transfer Conveyors, Conveyor Crossover BridgesGROB CYLINDER HEAD ASSEMBLY & TEST CELL INCLUDING LEAK TEST STATION W/USON 4000 LEAK TESTER, - (2) ABB Robot Stations, Model IRB6000M2000, 2004-S/N 66-27428 & 66-27431, w/Tech Pendants, Valve, Valve Spring, Key Install Stations, Rocker Install, Cam Install and Rework Areas, TorqueStations, Telesis Marking Stations, w/All Associ-ated Transfer Conveyor GROB SEAT & GUIDE INSTALL CELL, W/(2) KOBERLEIN VIBRATORY PARTS FEEDERS, (2) ABB Robots, Model 1RB66000M2000, 2004-S/N 66-27429 & 66-27430, w/Teach

Pendants, Install Presses, Cooper Tools Torque Station, (2) MIDBROOK INDUSTRIES Hurricane Parts Washers, ZEBRA Z6M Plus Label Printer, All Associated Conveyor2005 MIEKLE AUTOMATION VALVE SEAT INSTALLATION CELL W/INSTALL PRESS, MOTOMAN ROBOT, Model YR-UP-J3- BOO, S/N RH9281-5022-1, Teach Pendant Control, 10-HP Hydraulics,BECKHOFF Control Panel

COOLANT FILTRATIONHENRY COOLANT FILTRATION SYSTEMS, MODEL 6000SID 4-3-12CF (PRIMARY), S/N 6494 & Model 325/650 MV36 (Secondary), S/N 6239, Suction Indexing Wedgewire Drum, Approx. 6,000 Gallons/Hour Capacity, (4) Pumps, FilterConveyor, (3) THERMAL CARE 50-HP Chillers, Model TWX1000 w/INTERSOURCE Aluminum Chip Separator, Model 35288D w/Chip Wringer & Conveyor System

(4) CHIP BLASTER FILTRATION UNITS,Model JV-10

PARTS WASHERS2001 MIDBROOKS INC. 30-HP HURRICANE PARTS CLEANER, Model 5024W/BO Custom, Heated Wash, ALLEN BRADLEY Panelview 5500Control REINHART AUTOMATED PARTS WASHER,Model 3234, 7” Max Width, 48” Max Length, Electric Heat (2) SAFETY KLEEN HEATED PARTSWASHERS w/Oil Skimmers: (1) Model SKFL500 w/31” Table, (1) Model SKFL250 w/25” Table(2) SAFETY KLEEN 250 RECIRCULATINGPARTS CLEANERS BETTER ENGINEERING IMPULSEW/PARTS CLEANER BETTER ENGINEERING HOT WATER PARTS WASHER, 27” Table, Oil Skimmer

LAMB 4.6L & 5.4L FORD 4-VALVE CYLINDER HEAD ASSEMBLY & TEST AUTOMATION LINE

GROB CYLINDER HEAD ASSEMBLY & TEST CELL INCLUDING LEAK TEST STATION

MORI SEIKI 5-AXIS CNC TURNING CENTER

GROB SEAT & GUIDE INSTALL CELL

MIDBROOKS INC. 30-HP HURRICANE PARTS CLEANER REINHART 3234 AUTOMATED PARTS

2001

2008

3



TRANSFER SYSTEM • ROBOTS • MACHINE TOOLS

(14) ABB ROBOTS W/TEACH PENDANTS

JET GH-1340A 13” X 40” GAP BED LATHE

GSA CYLINDER HEAD PART TRANSFER SYSTEM

MODULAR STORAGE CABINET SYSTEM FOR PERISHABLE TOOLING

BRIDGEPORT ROMI TORMAX 13-5 13” X 56” ENGINE LATHE PARKER MAJESTIC #2CHEVALIER FSG618 SURFACE GRINDER

KBC TUM-1 3-HP VERTICAL MILL BRIDGEPORT 2-HP VERTICAL MILL DAKE JOHNSON V-40 VERTICAL BAND SAW GROB NS-24 VERTICAL BAND SAW

4



LOADING & TRANSFER • INSPECTION • TOOLROOM • FABRICATING

PARTS LOADING& TRANSFER2004 GSA Cylinder Head Part TransferSystem for DC3.7 (L/R Hand) Cylinder Heads Complete w/(2) Gantry Loaders, Buffer Areas, All Transfer Conveyor, Marking Area & Controls DURR Track-Mounted Robotic Load System Modular Storage Cabinet System for Perish-able Tooling(2) 2007 GUDEL Robot Gantrys, Model TM-72, 18’ Lateral Travel, ABB Robot, Model M2004, Teach Pendant(4) 2007 ABB Robots, Model 1RC5- M2004 w/Teach Pendants

INSPECTION(2) 2004 BROWN & SHARPE CNC CMM’s, Model GLOBAL IMAGE 9.15.8, S/N’s 00604-6214 & 0604-6216, Travels: 35.4” X-Axis, 59.1” Y-Axis, 31.5” Z-Axis, RENISHAW PH10MQ Probe, RENISHAW PI200 Probe Interface, PC DMIS CAD ++ 3.7 Software, Multi SensorScanning Capability, 92” x 43” x 10” Granite Surface Plate(2) 2000 BROWN & SHARPE CNC CMM’s, Model EXCEL 9.15.9, S/N 0400- 2421 & 0600-2435, Travels: 35.42” XAxis, 59.05” Y-Axis, 35.42” Z-Axis, RENISHAW PH10MQ Head, PHC 10-2 Probe Control, ACC2-2 Auto ChangeControl Unit, PC DMIS CAD++ 3.7 SoftwarePEGA-SYS Programmable Electronic Gauging System, w/48” x 72” x 32” Travels, Renishaw PH10M Probe, 6- Station Probe Holder, PC Controls(4) SPX Air Gauge Inspection StationsGranite Surface Plates: 48”x72”x7”,36”x36”x6”, 24”x36”x4”BOCKEL SCIENTIFIC Bench Top Electric Oven

500-lb. Stable Temp Bench Top Electric Oven SARTORIUS Gram Scale, Model 1072 Lots of Nice Inspection Equipment Including Go-No-Go Gages, MAHR Digimax CX1 Height Gage, STARRET Digichek Height Gage, MITUTOYO 18”Height Gage, V-Blocks, Angle Blocks, SAE & Metric Gage Pins, Gage Blocks, Chamfer Gages, Caliper Micrometers, TAYLOR HOBSON Form Taly 50mm Surface Tester, Electronic Twin Beam Height Gages, Sine Bar Sets, NEWENVacuum Tooling, FORD/CHRYSLER Gage Tooling, Dial Indicators, Bore Gages, SUNNEN Gages, Surface Finish Testers, CMM Supplies, (2) SIGHT PIPE Optical Viewers

TOOLROOMJET 13” x 40” Gap Bed Lathe, Model GH-1340A, S/N 806W424, 6” 3-Jaw Chuck, 18” Swing Over Gap, 13” Swing Over Bed, 6” Swing Over Carriage, 40” Between Centers, 1-1/2” Thru Spindle, 45-1800 RPM, Threading, Foot Brake, Removable Chip PanBRIDGEPORT ROMI 13” x 56” Engine Lathe, Model Tormax 13-5, 6” 3-Jaw Chuck, 13” Swing Over Bed, 6” Over Carriage, 56” Between Centers, 80-2500 RPM, 1-5/8” Thru Spindle, Threading, Foot Brake CHEVALIER FSG618 Surface Grinder, S/N 02B-4700, Hand FeedsPARKER MAJESTIC #2 Surface Grinder, Hanchett 612 Electromagnetic Chuck, Hand FeedsKBC 3-HP Vertical Mill, Model TUM-1,9” x 42” T-Slot Table w/AL-300S PowerFeed, 60-4200 RPM, Mitutoyo 2-AxisDRO BRIDGEPORT 2-HP Vertical Mill, 9” x48” Table, AL 400S Table Feed, 60-4200 RPM SUNNEN Cylinder Hone, Model SV-10D, Siemens Simatic ControlsDAKE JOHNSON Vertical Band Saw, Model

V-40, 41” Throat, 9” Max. Thickness, 26-1/4” x 26-1/4” Tilt Table, 500-FPM, Blade Welder, Model TPS-25 GROB Vertical Band Saw, Model NS- 24, 24” Throat x 12” Max. Thickness, 24”x 28” Table, Foot BrakeROLL-IN Vertical Band Saw, Model EF- 1459, 9-1/2” x 18-1/2” TableMAX Oscillating Spindle Sander, 24- 1/2” x 24-1/2” Table, Spindles to 4”MAX Universal 24” Disc Sander, 31- 1/2” x 12” Tilt TableCONQUEST 20” Disc Sander, 27-1/2” x 10-1/2” Tilt TableWILTON 20” Drill Press, Model VSG- 2015, 80-1200 RPM, 18” x 25” TableELLIS 17” Drill Press, Model 9400, 13” x 15” Table, Variable SpeedJET 14” Drill Press, Model JDP-14MF, 12” Table, 200-3630 RPMENERPAC 30-Ton Shop Press, 28-1/2”

Between HousingsSUNNEN Horizontal Hone, Model CH-100, 36” Max Length

FABRICATINGROPER WHITNEY PEXTO 52” x 12-Ga. Power Squaring Shear, Model 5212MITTLER BROTHERS Electric RingShear, 36” Throat 5TENNSMITH 48” x 16-Ga. Mechanical Plate Bending Rolls, Model SR48TENNSMITH 48” x 12-Ga. Finger Brake, Model V4812ACRA 6” x 16-Ga. Hand Corner Shear, Model FN-M616PEXTO 5-Ton Hand Punch, Model 17MITTLER BROTHERS Electric Tube NotcherGREENLEE 1816 Tube Bender, Assorted GREENLEE Hand Conduit Benders

(2) BROWN & SHARPE EXCEL 9.15.9 CNC CMM’S

TENNSMITH 48” X 16-GA. MECHANICAL PLATE BENDING ROLLS

(2) BROWN & SHARPE GLOBAL IMAGE 9.15.8 CNC CMM’S

ROPER WHITNEY PEXTO 52” X 12-GA. POWER SQUARING SHEAR

SUNNEN SV-10D CYLINDER HONE

2004 2006

5



WELDERS • CARRY DECKCRANE • FORKLIFTS • MATERIAL HANDLING

GC45K-LP, LPG, 3-Stage Mast, 83” / 161” Lowered / Raised, Side Shift, Fork Positioner, 60” Forks, S/N AT88A00547, 5,381 Hours • S/N AT88A00548, 7,024 Hours • S/N AT88A00530, 4,812 HoursForklift Jib Attachment, VESTIL Forklift Attaching Drum Lift SKYJACK Platform Scissor Lift, Model SJ3220, S/N 61071, 20’ Lift, Solid Tires, On Board Charger

MATERIAL HANDLINGMAKINO 24-Station Pallet Retrieval System, Model MM2, S/N 11940, (2) Pallet Retrievers GORBEL Free-Standing Bridge System 26’ x 42’ x 15’, 500-lb. Bridge System 26’ x 42’ x 15; 500-lb. Bridge GORBEL 500-lb. Ceiling Mount Bridge System, 10’W x 20’L Free-Standing 500-lb. Free-Standing Bridge System Free-Standing 270-lb. Gantry System, 25’L x 175”W x 167”H Pneumatic Hoist

WELDERSMILLER Goldstar 302 Stick Welder, 300- AMP @ 60%MILLER Dimension 302 MIG Welder, 300- AMP w/Miller 22A Wire Feeder (2) LINCOLN Precision TIG 275 Welder, 275-AMP @ 40% FIRE POWER PC250 Bench Top TIG Welder, 20-AMP @ 40% MILLER Resistance Spot Welder, Model MBS20-AFT, 14” Throat Oxy/Acetylene Torch Cart & Regulators

CARRY DECKCRANEBRODERSON Carry Deck Crane, Model 1C-200-213, S/N 50907, 30,000-lb. Capacity, 51’ Lift, Jib, Outriggers, Pneumatic Tires, 887-HP

FORKLIFTS2008 HYSTER 12,000-lb.Forklift, Model S120FTS, S/N G004V03900F, LPG, 3-Stage Mast, 84” / 163” Lowered / Raised w/CASCADE Paper Roll Clamp, Model 90F,(3) 2006 CATERPILLAR 10,000-lb. Forklifts, Model

HYSTER S120FTS 12,000-LB. FORKLIFT (3) CATERPILLAR GC45K-LP 10,000-LB. FORKLIFTS VESTIL FORKLIFT AATTACHING DRUM LIFT

SKYJACK SJ3220 PLATFORM SCISSOR LIFTTENNSMITH 48” X 12-GA. FINGER BRAKE

(2) QUINCY QSI-1500 300-HP AIR COMPRESSORS

BRODERSON 1C-200-213CARRY DECK CRANE

AIR TEK MSC4000-W4 REFRIGERATED AIR DRYER

1 OF 2

2008 2006

6



AIR COMPRESSORS & DRYERS • MISCELLANEOUS • OFFICE

AIR COMPRESSORS& DRYERS(2) QUINCY 300-HP AIR COMPRESSORS, ModelQSI-1500 AIR TEK Refrigerated Air Dryer, Model MSC4000-W4, 4000 CFM ZEKS Air Dryer, Model 100HSBA100, S/N 64184-3 ULTRA FILTER Water/Oil Separator

MISCELLANEOUSFLOW DYNAMICS TEST CELL W/FLOWMAXX VENTURI, P/N VF40-APE- 1470 ARESCO 15,000-lb. Electric / Hydraulic Vehicle Lift, Model GR15UD SCHATZ 200Nm Electronic Torque System ATLAS COPCO Tensor Digital Torque System (2) SNAP-ON Torque Meter Test Stations

2005 SEALED AIR Speedy PackerSystem, Foam-In-Bag Packaging System(10) PIG Twin Poly-Drum Spill Containment Pallets 500-Gallon Poly Storage Tank w/Containment Pit LANTECH Q-Series Stretch Wrapper 65” Table, Auto/Manual Controls48” x 60” Platform Scale w/Digital Scale / Readout TENNANT Electric Floor Scrubber, TENNANT Gas Floor Sweeper COLUMBIA 2,200-lb. Electric Maintenance Cart LANDA 13.0-HP Pressure Washer (9) 2010 CHRYSLER 3.5L, V6 Engines, Com-plete w/Harness (15) Skids of Scrap Aluminum Heads (2) TREGO VFP50Hand Presses (4) P&H PHN-4 Hydraulic Presses, 4- Ton w/Slide Table GENERAL SHELTERS Porta-Cool Air Circulato

STEELMAN Gas Fired Oven, 350,000 BTU, 96 CU/FT Volume KEM METAL Fume Cabinet MISTKOP Mist Collector GRIZZLY G0440 Dust CollectorYELLOW BELLY Sump Sucker PARKER PARKRIMPI Hyd. Hose Crimper BOSCH Cordless Torque Guns, 123” x 75” x 4” Steel Layout Table RIDGID 1224 Pipe Threader MILWAUKEE 14” Abrasive Chop Saw (30) DUMP HOPPERS • Rolling Engine Stands • 8-Ton Shop Hoist • SNAP-ON 4-Ton Air / Hydraulic Floor Jack • DYNAMET Tipper • (60) Modular Tool Cabinets • (14) MSC Hardware Storage Cabinets w/Lots of Black Iron & Plated Hardware • (7) KENNEDY Tool Boxes to 5-Drawer • Jobsite Stor-age Boxes • Double End Grinders • Belt Sanders

• Repair Parts • Cables • Actuators Control Panels • Servers • Drive Belts • Filters • Hoses • Values Bearings • Electronics • Electric Motors & Pumps • (2) Cylinder Head Bolt Hole Locators • Arbor Presses • Vises • Perishable Tooling • (20) Print File Cabinets • Rolling Material Carts • Work Benches • Shelving • Pallet Rack-ing • Double Door Cabinets • Roller Conveyor • Roller Stands • Banding & Strapping Carts • Pallet Jacks • Ladders

OFFICE(22) MODULAR OFFICE SETS W/PARTI-TIONS • (20) Laminated Desk Sets • 12’ x 54” Conference Table w/(10) Chairs • (4) 48” Round Tables w/Chairs • Assorted Bookcases • Credenzas • File Cabinets

FIRE POWER PC250 BENCH TOP TIG WELDER (14) 250-LB. & 500 LB. PEDESTAL JIBS

GORBEL 500-LB. CEILING MOUNT BRIDGE SYSTEM

(4) MILLER & LINCOLN MIG & TIG WELDERS

MAKINO MM2 24-STATION PALLET RETRIEVAL SYSTEM

FLOW DYNAMICS TEST CELL W/FLOWMAXX VENTURI ATLAS COPCO TENSOR DIGITAL TORQUE SYSTEM

3 OF 4 1 OF 14

20001 OF 111 OF 82007

Global Headquarters:12625 High Bluff DriveSan Diego, CA 92130

For further information, please contact:Ph: +1 (877) 303.8040Fx: +1 (866) 388.8595or visit www.hgpauction.com

Forwarding Service Requested

BUYER’S PREMIUM: 15% cash buyers; 18% for credit card purchasers(Refer to Term 7 in the Auction Terms and Conditions for details)

DIRECTIONS:From I-80 in Toledo, Ohio, take US-23 North into Michigan to Exit #17 in Dundee. Go West on M50 / West Chicago Boulevard 15.5 miles to South OccidentalHwy. Turn left and go 2.5 miles to sale sight.

LODGING:HOLIDAY INN (888) 897-0088100 White Tail Drive, 48131QUALITY INN (800) 992-2694111 Waterstradt Commerce Drive, 48131COUNTRY INN & SUITES (800) 830-5222665 Tecumseh Street, 48131

FIRST CLASS MAIL

HENRY COOLANT FILTRATION SYSTEM

2 OF 4 BROWN & SHARPE CNC CMM’S

(7) MAKINO A88 CNC HMC’S

HYSTER S120FTS 12,000-LB.FORKLIFT

Bid Online in Real Time at:1. Register at www.BidSpotter.com.2. Mail a deposit check in the amount of 25% of your anticipated purchases to: Myron Bowling AuctioneersP O Box 369 • Ross, Ohio 45061. For overnight delivery Service: 3901 Krause Ln • Hamilton, OH 45014

If You Need Assistance Call 513-738-3311.ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER’S PREMIUM

UNABLE TO ATTEND?

TERMS & CONDITIONSBuyers are responsible for all shipping and rigging charges. • All items are sold AS IS, WHERE IS AND WITH ALL FAULTS. • Heritage Global Partners shall charge and collect from each successful bidder a 15% on site cash buyers; 18% on site buyers using credit cards. Purchasers who pay in the form of certified funds or wire transfer shall receive a discount from the buyer’s premium equal to 3% of the purchase price. • Each successful bidder must pay a 25% deposit toward the purchase price immediately following the successful bid. • Applicable taxes will be added to the purchase price of all taxable items. • Acceptable means of payment include certified funds, wire transfers, Visa®, American Express® and Mastercard®. • The complete terms and conditions that govern this auction will be distributed at the auction site and/or are available on our website at www.hgpauction.com. The complete terms and conditions may include terms unique to this particular auction. Please read them carefully before you bid in the auction. If you participate in the auction, you will be deemed to have read and consented to all of the Terms & Conditions.

©2013 HERITAGE GLOBAL PARTNERS, A COUNCIL RB CAPITAL COMPANY, ALL RIGHTS RESERVED Complete Terms & Conditions are contained in the Sale Catalog and on the website

at www.hgpauction.com. Please review the Terms and Conditions prior to placing bids on any items. Global Headquarters: San Diego, California

SALE CONDUCTED BY:

Liquidation of Assets of:

POWER-TECMANUFACTURING LLC

5550 S Occidental Rd, Tecumseh, Michigan

WEDNESDAY,APRIIL 17th

Starts at 10AMINSPECTION: Day prior from 9AM - 4PM

Auction Brochure - Liquidation Auction - Equipment Auctions| HGP

Documents

Transcript of Auction Brochure - Liquidation Auction - Equipment Auctions| HGP