AUCTION · 3 mazak quick turn nexus 200 cnc lathe mazak dual turn 20 opposed spindle cnc lathe...

8
FANTASTIC, LATE MODEL CNC MACHINE SHOP! Featuring (2) 2004 Mazak Integrex 200-IIIST CNC Turning Centers, (2) 2003 Mazak Multiplex 6200Y Opposed Spindle Turning Centers, CNC Horizontal & Vertical Machining Centers, CNC Drill & Tap Machines, Coordinate Measuring Machine, Gundrill, Hone, Large Quantity Precision Machine Accessories, Material Handling & Support Equipment, Air Compressor & Dryer, & Much, Much More AUCTION Sale Conducted By: PLANT & MACHINERY I NC. AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE Bob Braman – QL1-J91-092104-802 Ron Moore – QL1-J91-092104-792 HOUSTON • DALLAS • ST. LOUIS Headquarters: 2901 W. Sam Houston Pkwy. N., Suite A-130 Houston, TX 77043 FAX: (713) 672-7905 PHONE: (713) 691-4401 E-MAIL: [email protected] WEBSITE: www.pmi-auction.com (1 OF 2) MAZAK INTEGREX 200-IIIST MULTI-AXIS CNC TURNING CENTERS CNC MITSUBISHI MDL. FX10K 5-AXIS WIRE EDM CNC MITSUI SEIKI MDL. HT-3A 11-PALLET HORIZONTAL MACHINING CENTER CNC MAZAK MULTIPLEX 6200Y OPPOSED SPINDLE TURNING CENTER CNC < STAR MDL. SV32 9-AXIS SWISS TYPE CNC LATHE CNC 2004 2004 Surplus to the continuing operations of BAR MANUFACTURING LLC 3921 Sandstone Drive EL DORADO HILLS (SACRAMENTO AREA), CALIFORNIA 95762 (See Directions on Back Page) THURSDAY, FEBRUARY 16 • 10:30 A.M. INSPECTION Wednesday, February 15 • 9:00 A.M. to 4:00 P.M. &Morning of Sale A 10% BUYER’S PREMIUM WILL APPLY 2000 2003 PLEASE NOTE: AUCTION STARTS 10:30 A.M. BE PROMPT – MAJOR MACHINES SELL EARLY!

Transcript of AUCTION · 3 mazak quick turn nexus 200 cnc lathe mazak dual turn 20 opposed spindle cnc lathe...

FANTASTIC, LATE MODEL CNC MACHINE SHOP!Featuring (2) 2004 Mazak Integrex 200-IIIST CNC Turning Centers, (2) 2003 Mazak Multiplex 6200Y Opposed Spindle Turning Centers,

CNC Horizontal & Vertical Machining Centers, CNC Drill & Tap Machines, Coordinate Measuring Machine, Gundrill, Hone,Large Quantity Precision Machine Accessories, Material Handling & Support Equipment, Air Compressor & Dryer, & Much, Much More

AUCTION

Sale Conducted By:

PLANT & MACHINERY INC.AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE

Bob Braman – QL1-J91-092104-802Ron Moore – QL1-J91-092104-792

HOUSTON • DALLAS • ST. LOUIS

Headquarters:2901 W. Sam Houston Pkwy. N., Suite A-130

Houston, TX 77043

FAX: (713) 672-7905PHONE: (713) 691-4401

E-MAIL: [email protected]: www.pmi-auction.com

(1 OF 2) MAZAK INTEGREX 200-IIIST MULTI-AXIS CNC TURNING CENTERS

CNC

MITSUBISHI MDL. FX10K 5-AXIS WIRE EDM

CNC

MITSUI SEIKI MDL. HT-3A 11-PALLET HORIZONTAL MACHINING CENTER

CNC

MAZAK MULTIPLEX 6200Y OPPOSED SPINDLE TURNING CENTER

CNC

<STAR MDL.SV32 9-AXISSWISS TYPECNC LATHE

CNC

2004

2004

Surplus to the continuing operations ofBAR MANUFACTURING LLC

3921 Sandstone DriveEL DORADO HILLS (SACRAMENTO AREA), CALIFORNIA 95762

(See Directions on Back Page)

THURSDAY, FEBRUARY 16 • 10:30 A.M.INSPECTION

Wednesday, February 15 • 9:00 A.M. to 4:00 P.M. & Morning of Sale

A 10%BUYER’SPREMIUM

WILLAPPLY

2000

2003

PLEASE NOTE: AUCTION STARTS 10:30 A.M.BE PROMPT – MAJOR MACHINES SELL EARLY!

2

MULTI-AXISCNC TURNING CENTERS

(2) MAZAK INTEGREX MDL. 200-IIIST, new4/2004, Mazatrol 640MT Pro ConversationalCNC control, 8" main and sub-spndl. chucks,26" max. swing, 26" max. machining dia.(upper turret), 10.24" max. machining dia.,(lower turret), 2.55" bar cap., 40" max.machining length, main spndl. spds.:35–5,000 RPM, 30 HP main spndl. drivemotor, 2.99" spndl. through hole, sub-spndl.spds.: 35–5,000 RPM, 25 HP sub-spndl.drive motor, 2.99" sub-spndl. through holedia., KM-63 milling head spndl. taper, millingspndl. spds.:15–12,000 RPM, 20 HP millingspndl. drive motor, .0001 deg. main spndl.indexing, 40 pos. milling spndl. tool changer,hi-pressure through spndl. coolant to millinghead, 9 pos. lower drum style turret, 22.83"X-axis travel, 6.3" Y-axis travel, 41.14" Z-axistravel, 9.5" x 2-axis travel, 38.98" Z 2-axistravel, 41.34" W-axis travel, auto. tool presettersystem, chip conveyor, S/N 167502 (3,175pwr. on hrs. and 994 cutting hrs.), S/N 168427(3,291 pwr. on hrs. and 1,002 cutting hrs.).

OPPOSED-SPINDLECNC TURNING CENTERS

(2) MAZAK MULTIPLEX MDL. 6200Y, new2003, Mazatrol Fusion 640T CNC control,Flex-GL100F gantry robot load/unloadsystem, 8" dia. 3-jaw chucks on both spndl.,12.60" max. swing, 12.60" max. machiningdia., 46.85" dist. btn. spndls., 7.59" max.machining length (chucking), 20.87" max.machining length (shaft), Y-axis stroke +4"/-2" from center, 2.01" max. bar dia., A2 - 6"spndl. mount, variable spndl. spds. to 5,000RPM, 15/22 KW spndl. drive motors, (2) 12pos. turrets, C-axis spndl. control on bothspndls., 4,500 RPM milling spndl. spds., 3.7KW milling drive motor, 1,299 IPM rapidtraverse, assorted live tooling, auto. toolpresetting, auto partition, chip conveyor,coolant system, S/N 166160 (Mfg. 11/2003- 2,072 pwr. on hrs. and 471 cutting hrs.),S/N 167490 (Mfg. 12/2003 - 4,643 pwr. onhrs. and 2,166 cutting hrs.).

CNC

2003

MAZAK MULTIPLEX 6200Y OPPOSED SPINDLE TURNING CENTER

CNCMAZAK MULTIPLEX 6200Y OPPOSED SPINDLE TURNING CENTER

CNCMAZAK INTEGREX 200-IIIST MULTI-AXIS CNC TURNING CENTER

PLEASE NOTE:AUCTION STARTS

10:30 A.M.

BE PROMPT –MAJOR MACHINES

SELL EARLY!

40 ATC

20042AVAILABLE

2003

3MAZAK QUICK TURN NEXUS 200 CNC LATHE

MAZAK DUAL TURN 20 OPPOSED SPINDLE CNC LATHE

CLOSEUP VIEW OF LNS HYDROBAR BARFEED

OPPOSED-SPINDLECNC TURNING CENTERS, cont.

MAZAK DUAL TURN 20, 8/1999, Mazatrol PC Fusion 640T CNCcontrol, 12.608" max. swing, (2) 8" hyd. chucks, 49.21" edge-to-edgedist. btn. spndls., 12.60" max. machining dia., 5.91" max. machininglength, A2 - 6" spndl. mount, 2.01" max. bar dia., 2.40" spndl. throughhole, variable spndl. spds. to 5,000 RPM, 20 HP spndl. drive motor, (2)12 pos. turrets, 1,200 IPM rapid traverse, (2) 8" dia. 3-jaw hyd. chucks,pwr. doors, chip conveyor, auto. tool presetter, pwr. partition, S/N 144218.

SWISS TYPE CNC LATHESTAR MDL. SV32 9-AXIS, new 5/2004, Fanuc Series 16i-TB CNCcontrol, parts catcher, 1-1/4" max. bar dia., 12-13/64" max. machininglength, 5/16" max. drill dia., (3) driven tools and (4) fixed tools on X-slide,10 pos. rear turret w/driven tools, 7,000 RPM main and sub spndl.,C-axis main spndl., 7.5 kW main spndl. drive motor, 3.7 kW sub spndl.drive motor, sub spndl. w/Z-slide and C-axis, rigid tapping, off-line toolpresetter, (3) right angle milling heads, assorted spndl. collets, partscatcher and exit conveyor, S/N 0329 (under 100 hours of machining time!)ALSO AVAILABLE: LNS MDL. 6.32HS-4.6 SUPER HYDROBARturret style barfeed, 12' max. bar length, new 2003, S/N 42645.

CNC LATHEMAZAK QUICK TURN MDL. NEXUS 200, new 8/2004, Mazatrol 640TCNC control, 8" chuck, 24.02" max. swing, 13.78" max. machiningdia., 2.56" max. bar cap., 5.12" to 26.18" dist. spndl. end and turretface, spndl. spds.: 35–5,000 RPM, 2.95" spndl. bore, 25 HP spndl.drive motor, 12 pos. turret, programmable tailstock body, 21.65" tailstockbody movement, auto. tool presetter, S/N 171332 (1,627 pwr. onhrs., 361 cut cycle hrs.).

ENGINE LATHEMORI SEIKI 18" X 30", Mdl. MS850, 1-38" spndl. hole, (12) spndl.spds.: 32–1,800 RPM, inch thdng., KDK quick change toolpost,2-axis D.R.O., steadyrest, S/N 6905.

SPEED LATHES(5) OVERBECH TWISTERS, 5C collet spndls., foot pedal control.

CNC

STAR MDL. SV32 9-AXIS SWISS TYPE CNC LATHE

CNC

CNC2003

1999

2004

2004

Surplus to the continuing operations ofBAR MANUFACTURING LLC

3921 Sandstone DriveEL DORADO HILLS (SACRAMENTO AREA),

CALIFORNIA 95762(See Directions on Back Page)

THURSDAY, FEBRUARY 1610:30 A.M.

AUCTION

4

MITSUI SEIKI MDL. HT3A 11-PALLET HORIZONTAL MACHINING CENTER HAAS MDL. HS-1 HORIZONTAL MACHINING CENTER

CNC HORIZONTAL MACHINING CENTERSMITSUI SEIKI MDL. HT3A 11-PALLET, Fanuc Series 15M CNCcontrol, 15.7" x 15.7" pallet, 21.8" X-axis, 19.7" Y-axis, 19.7" Z-axistravels, Cat-40 spndl. taper, spndl. spds. to 15,000 RPM, 20 HP spndl.drive motor, 60 pos. auto. tool changer, Barnes “Clean-All” fine chipfiltration system, hi-pressure through spndl. coolant system, 10-pallet rotarypallet pool with set-up station, rigid tapping, tool life management, toolbreakage detector, S/N 201.

HAAS MDL. HS-1, new 9/1995, Haas CNC control, 14" x 26" tbl., 18" X-axis,18" Y-axis travel, 18" Z-axis travel, Cat-40 spndl. taper, spndl. spds.:0–7,500 RPM, 15 HP spndl. drive motor, 24 pos. auto. tool changer, fullenclosure, chip conveyor, coolant system, S/N 50092.

CNC VERTICAL MACHINING CENTERSAKIRA SEIKI MDL. SV800, new 1996, Mitsubishi Meldas CNC control,32" X-axis, 20" Y-axis, 20" Z-axis, travels. BT-40 spndl. taper, spndl.spds. to 10,000 RPM, 30 HP spndl. drive motor, 20 pos. auto. toolchanger, rigid tapping, chip conveyor, S/N 96361-012.

MAZAK MDL. VTC16A, new 8/1994, Mazatrol M32B CNC control, 16.1"x 35.4" tbl., 660 lb. tbl. load cap., 22" X-axis travel, 16.14" Y-axis travel,20.79" Z-axis travel, spndl. spds.: 60–7,000 RPM, Cat-40 spndl. taper,15 HP spndl. drive motor, 24 tool auto. tool changer, S/N 111296.

(2) CHIRON MDL. FZ12W, new 1995, twin pallet, Fanuc 0M CNCcontrols, (2) 13.8 x 26" tbls. on rotary changer, 21" X-axis, 12" Y-axis,16" Z-axis travels, Cat-40 spndl. taper, 10,500 RPM spndl. spds.,7.5 HP spndl. drive motor, 12 tool ATC, rigid tapping, chip system,S/N 486-91, S/N 486-96.

AKIRA SEIKI MDL. SV800 VERTICAL MACHINING CENTER MAZAK MDL. VTC16A VERTICAL MACHINING CENTER

CNCCNC

1996

CNC CNC

199511PALLET

5

WIRE TYPE ELECTRICAL DISCHARGE MACHINEMITSUBISHI MDL. FX10K 5-AXIS, new 2000, 31.49" x 22.63" x 8.46" max. workpiece dimension,1,100 lb. max. workpiece weight, 24.8" x 20.86" tbl., 13.77" X-axis travel, 9.84" Y-axis travel,8.66" Z-axis travel, 50 amp pwr. supply, submerged cutting system, Mdl. HE-UV3 chiller system,2-stage resin filtration system, wire chopper, S/N 50K10850.

CNC DRILL & TAP MACHINES(3) ENSHU MDL. DT-C CENTER 300 VERTICAL SPINDLE, new 1992 and 1990, Fanuc 0MMate CNC control, 23.6" x 11.8" tbl., 1,100 lb. max. workpiece weight, 15.7" X-axis, 18.9" Y-axis,11" Z-axis travel, spndl. spds.: 880–8,000 RPM, 3,600 RPM max. rigid tap spd., 1,181 IPM rapidtraverse, BT30 spndl. taper, 10 tool auto. tool changer, 4.9 HP spndl. drive motor, S/N 154 (1990)S/N 216 (1992), S/N 217 (1992).

KIRA MDL. KN30HS HORIZONTAL SPINDLE, new 12/1994, Fanuc 0M CNC control, 19.7" x13.8" tbl., 1,100 lb. tbl. load cap., 11.8" X-axis, 11.8" Y-axis, 9.8" Z-axis travels, spndl. spds.:90–10,000 RPM in 3 ranges, BT30 spndl. taper, 5.5 KW spndl. drive motor, 16 pos. auto. toolchanger, Yuasa Mdl. UTBT 2-axis programmable tbl., S/N 14001, 5-1/2" T-slotted faceplate, 2-axispositioning, Mdl. UDNC-750 control system, S/N B0124.

GUN DRILLELDORADO MEGA MDL. M75-1032, new 2004, sgl. spndl., 18" stroke, fixture base, Bijur spraymist coolant system, Mdl. F18-1101 hi-pressure coolant system, S/N 1676, ballscrew drill feed, 6"dia. 6-jaw scroll chuck, S/N 1676/1984.

VERTICAL TURRET MILLSLAGUN MDL. FTV2, 9" x 42" tbl., 3 HP variable spd. milling head, long. pwr. feed, S/N N.A.

BRIDGEPORT SERIES 1, 9" x 42" tbl., 2 HP motor, S/N 231228.

HONING MACHINESSUNNEN MDL. SSH-1680 POWER STROKER, new 2004, spds.: 250–2,500 RPM, 160 mil. max.stroke length, 80–310 SPM, electronic stroke counter, S/N 80724 (Unused).

OLSON MDL. MBH-1290D, S/N 17091.

KIRA MDL. KN30HS HORIZONTAL SPINDLE DRILL & TAP MACHINE

ELDORADO MEGA M-75 SINGLE SPINDLE GUN DRILL

SUNNEN MDL. SSH-1680 POWER STROKING HONING MACHINE

MITSUBISHI MDL. FX10K 5-AXIS WIRE EDM

ENSHU MDL. DT-C 300 DRILLING& TAPPING MACHINE

CNC

2004

2000

2004

5-AXIS

UNUSED

CNC

CNC3AVAILABLE

CHIRON MDL. FX12W HIGH SPEED VERTICAL MACHINING CENTER

CNC

1995

PLEASENOTE:

AUCTIONSTARTS

10:30 A.M.

BE PROMPT– MAJOR

MACHINESSELL EARLY!

2AVAILABLE

6

ELITESONIC MDL. AQC-1900 ULTRASONIC CLEANING SYSTEM CUSTOM STAINLESS STEEL BELT STYLE PARTS WASHER

BROWN & SHARPE GAGE 2000COORDINATE MEASURING MACHINE

SCHERR TUMICO 30" OPTICAL COMPARATOR KAWASAKI 5-AXIS PART HANDLING ROBOT

1998 1999

PRECISIONINSTRUMENTS

NIKON STEREOSCOPE, adj. height columnstyle stand, 2-axis micrometer stage w/D.R.O.,4 pos. lens turret; SEVERAL 24" SQ. PRE-CISION GRANITE PLATES; MITUTOYO12" DIAL TYPE HEIGHT GAUGE; ACE 24" X36" GRANITE SURFACE PLATE; OLYMPUSBINOCULAR MICROSCOPE, H.D. tbl.stand, sgl. lens; VISION ENGINEERINGMDL. TS-3 STEREO DYNASCOPE, 150 wattlighting pwr. supply; NIKON BINOCULARSTEREOSCOPES; PARAGON BINOCULARSTEREOSCOPE; OLYMPUS BINOCULARSTEREOSCOPE; (3) BAUSCH & LOMBSTEREO ZOOM 4 BINOCULAR STEREO-SCOPES.

ULTRASONICCLEANING SYSTEMS

ELITESONIC EQUIPMENT MDL. AQC-1900,manual basket type, 19-station, (2) acid bathsw/immersion heaters, (2) Electro-polishing sta-tions, digital temp. controls, dual ultrasonic gen-erators, 1,000 amp rectifier set, 24" x 24" x 24"nominal tank, central piping and controls, fumescrubber, Aquafine de-ionized water systemw/ultraviolet disinfection unit.

BARON BLAKESLEY MDL. MLR-120 ULTRA-SONIC VAPOR DEGREASER, on roller stand,S/N 54645.

DELTA MDL. SR1550CTX4 RECTIFIER, 500amp output, 0–15 v., 7,500 watts, S/N 104220.

BELT STYLEPARTS WASHER

CUSTOM, 12"W. belt, 48" washer section w/5HP wash pump - all stainless steel construction,24" exit end, (8) 10-1/4" x 20" x 4" stainless steelbaskets, digital temp. controls, 1 HP air knifedryer, immersion heated tank.

DRY BLAST CABINETTRINCO MDL. 48/BP2, recirculating abrasivetower, lighting, S/N 38079-2.

COORDINATEMEASURING MACHINE

BROWN & SHARPE GAUGE 2000, new 1998,18" X-axis travel, 20" Y-axis travel, 16" Z-axistravel, 22" x 22.5" x 19" max. workpiece size, 500lb. max. tbl. load cap., .00001" resolution, Ren-ishaw TP-ES touch probe system, Reflex soft-ware system, S/N 0598-1645.

OPTICAL COMPARATORSCHERR TUMICO 30", new 1992, Mdl. 22-2500,surface reflection attach., 20X lens, Quadra-Chek2000 2-axis D.R.O. w/edge finding, variable spd.,8" x 35" tbl., long. feeds, S/N 543.

PART HANDLING ROBOTKAWASAKI MDL. FS-10L - 5-AXIS, new 1999,teach pendant, Mdl. C30F-A013 robot controller,S/N 93083.

PROXY BIDSIf you cannot attend this sale we will bid onyour behalf. Contact Houston office at(713) 691-4401 for instructions, or go toour website at: www.pmi-auction.com.

7

GARDNER DENVER REFRIGERATED AIR DRYER

VIEW OF KURT “CLUSTERTOWER” TOMBSTONES

PARTIAL VIEW OF #40 TAPER MACHINING CENTER TOOLING

GARDNER DENVER 50 HP ROTARY SCREW AIR COMPRESSOR

FORKLIFTCATERPILLAR 3,600 LB. CAP., Mdl. T40B, LP engine, 130" max. lift,side-shifter, S/N 2N2879.

FLOOR SCRUBBERCLARKE MDL. S20-ENCORE BATTERY POWERED, new 2004, S/N CK0743.

PLATFORM SCALEHOMS 3,600 LB. SPRINGLESS DIAL, w/roller base.

MISCELLANEOUS MACHINERYPYH 6" DOUBLE END CARBIDE GRINDER, tilt tbl. and stand; (2)DELTA 17" PEDESTAL DRILL PRESSES, Mdl. 17-900, adj. height tbl.;ROCKWELL 15" PEDESTAL DRILL PRESS; CENTRAL MACHINERY16-SPD. PEDESTAL DRILL PRESS; MULTI-STATION DRILLINGMACHINE, (2) Brother Hi-Tap Mdl. BT6-311 auto. tapping heads and fixturebase; ALL BALL DOUBLE END BENCH GRINDER on pedestal; PYHMDL. TCBS-712 HORIZONTAL BANDSAW, 7" rd. cap., roller stand.

MISCELLANEOUS PRECISIONMACHINE ACCESSORIES

(2) KURT 6" CLUSTER TOWER TOMBSTONE VISES, 4 pos., dbl. gripvise heads; (2) 16" ALUMINUM TOMBSTONES; TSUDAKOMA 10"4-AXIS ROTARY TBL., Mdl. TNCM-251R, vert. design; KURT 6"MILLING VISES; SINE TBLS.; AND OTHER MACHINE SHOP ITEMS.

MACHINING CENTER TOOLHOLDERSOVER (200) CAT-40 AND BT-40, including: endmill holders, collet styleholders, drill chucks, shell mill holders, extended length collet and endmillholders; LARGE QTY. OF ERICKSON SPRING COLLETS.

AIR COMPRESSORGARDNER DENVER MDL. EBH0JC ROTARY SCREW TYPE, new1996, 50 HP motor, skid mtd., air cooled, S/N U69964.

REFRIGERATED AIR DRYERGARDNER DENVER MDL. 7000071, 250 SCFM rated cap., S/N 09-24-96-7121.

1996

100sAVAILABLE

1996

Surplus to thecontinuing operations of

BARMANUFACTURING

LLC3921 Sandstone Drive

EL DORADO HILLS(SACRAMENTO AREA),

CALIFORNIA 95762(See Directions on Back Page)

THURSDAY,FEBRUARY 1610:30 A.M.

INSPECTIONWednesday, February 159:00 A.M. to 4:00 P.M.

& Morning of Sale

AUCTION

IP-6204326

DIRECTIONSFROM SACRAMENTO INTERNATIONAL AIRPORT: Exit airporton I-5 South. Proceed approximately 9.5 miles south to Sacramento.Exit I-5 onto ramp for Highway 50 East/99 South Fresno. Proceedingeast on Highway 50 East/99 South Fresno you will come to a splitor “Y,” bear left following signs for Highway 50 East Placerville/SouthLake Tahoe. Follow Highway 50 East approximately 24 miles to Exit30A for Latrobe Road. At bottom of exit ramp, turn right (south) ontoLatrobe Road and proceed approximately .7 mile to 3rd traffic light.Turn right onto Golden Foothills Parkway and follow Golden FoothillsParkway .9 mile to Sandstone Drive. Turn right onto Sandstone andproceed 200 yards to auction on right. Watch for auction signs.

ARE YOU SELLINGYOUR PLANT?

CALL 1-800-282-8466FOR A CONFIDENTIAL

CONSULTATION

PLANT & MACHINERY INC.APPRAISAL DIVISION

Industrial Machinery & Equipment AppraisalsCall 1-800-282-8466

FANTASTIC, LATE MODELCNC MACHINE SHOP!

Featuring (2) 2004 Mazak Integrex 200-IIISTCNC Turning Centers, (2) 2003 Mazak

Multiplex 6200Y Opposed Spindle TurningCenters, CNC Horizontal & VerticalMachining Centers, CNC Drill & Tap

Machines, Coordinate Measuring Machine,Gundrill, Hone, Large Quantity PrecisionMachine Accessories, Material Handling& Support Equipment, Air Compressor

& Dryer, & Much, Much More

AUCTIONEL DORADO HILLS

(SACRAMENTO AREA),CALIFORNIA

PLANT & MACHINERY INC.AUCTIONEERS•APPRAISERS•LIQUIDATORS•REAL ESTATE

P.O. Box 19100Houston,TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 305

PUBLIC INVITEDTHURSDAY, FEBRUARY 16 • 10:30 A.M.

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

PROXY BIDSIf you cannot attend this sale we will bid on yourbehalf. Contact Houston office at (713) 691-4401for instructions, or go to our website at: www.pmi-auction.com.

A 10% Buyer’s Premium will apply.

Everything will be sold to the highest bidder or biddersfor cash in accordance with the auctioneer’s CustomaryTerms of Sale, copies of which will be posted on thepremises.

ALL PAYMENTS MUST BE MADE BY CASH,CASHIER’S CHECK, WIRE TRANSFER OR COMPANYCHECK WITH BANK LETTER GUARANTEEINGPAYMENT TO PLANT & MACHINERY, INC.

Here is an example of what your letter should be:Mr. “Customer Name” is a customer of this bank. Thisbank will guarantee unqualified payment to PMI on theaccount listed herein up to the amount of $______.This letter is good until March 16, 2006.

In default of payment of bills in full within the timetherein specified, the Auctioneer in addition to all otherremedies allowed by law, may retain all monies receivedas deposit or otherwise, as liquidated damages. Allitems must be removed by the time announced at thestart of the sale.

Lots not paid for and/or removed within the time allowedmay be resold at public or private sale without furthernotice, and any deficiency, together with all expensesand charge of resale, will be charged to the defaultingpurchaser.

The buyer acknowledges that he or an agent hasinspected all of the assets upon which he will be biddingand/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” “WITHALL FAULTS” and “WITH REMOVAL AT BUYER’S RISKAND EXPENSE.”THE AUCTIONEER EXPRESSLY DISCLAIMS ONTHE PART OF THE AUCTIONEER AS AGENT ANDTHE SELLER, ANY WARRANTY AS TO FITNESS ORUSABILITY OF ALL THE ASSETS, AND THE BUYEREXPRESSLY WAIVES ANY CLAIM IN RESPECT TOANY POSSIBLE FUTURE USE OF ANY ASSETPURCHASED FOR ANY PURPOSE WHATSOEVER.

The buyer does hereby assume and does agree toindemnify and hold the auctioneer harmless from anyfuture claim which shall pertain to the fitness or use of that

asset as being purchased. Riggers, movers, electriciansand buyers performing work at the Auction Site mustprovide PMI with evidence of insurance. The insurancecoverage must be at a level acceptable to PMI and tothe seller. PMI reserves the right to withdraw items, alterthe order of the sale, accept bids from the seller, andgroup lots as it may deem appropriate.

Although all information has been obtained from sourcesdeemed reliable, the auctioneer and seller make nowarranty or guarantee, expressed or implied, as to theaccuracy of the information herein contained, or containedin our catalog. It is for this reason that buyers should availthemselves of the opportunity to make inspection prior tothe auction. Although it is not likely, auction sales aresubject to cancellation or postponement. Kindly contactauctioneer prior to attendance.

These terms and conditions may be modified orsupplemented by language in the catalog available atthe sale site or by announcement at the start of the sale.Bidders should be attentive to those announcementsand to the catalog language.

TERMS & CONDITIONS

LODGINGHoliday Inn Express...........(916) 358-31074360 Town Center Boulevard (Exit 30A)El Dorado Hills, CA *Ask for Bar Mfg. Rate

Courtyard by Marriott.........(916) 984-76242575 Iron Point Road (Exit 27) Folsom, CA

Hilton Garden Inn ..............(916) 553-1717221 Iron Point Road (Exit 23) Folsom, CA