ATyS C55 - Socomec · 2021. 2. 16. · ATyS C55 ATS Controller mid-level functionalities 1....
Transcript of ATyS C55 - Socomec · 2021. 2. 16. · ATyS C55 ATS Controller mid-level functionalities 1....
Tran
sfer
sw
itch
esATyS C55ATS Controllermid-level functionalities
ATyS C55
Function
ATyS C55 is a complete ATSE controller that can be used to pilot a remotely operated transfer switch of any technology: motorised switches (e.g. ATyS r, ATyS S or ATyS d M), circuit breakers or contactors. ATyS C55 ensure the automatic or remotely controlled transfer from one source to another, with configurable timers and thresholds, for any combination of sources: 2 transformers, 1 transformer and 1 genset or 2 gensets.
AdvantagesFast commissioningOn initial power up, the ATyS C55’s smart wizard will guide the operator through the commissioning process.
VersatileThe ATyS C55 is compatible with contactors, breakers and switches. It can also work for all type of 2-source applications combining mains and gensets.
Clear visualisation and operation • High-resolution LCD screen with clear defined messages.
• Real-time pop-ups to show timers, alarms, faults and information alerts.
• Quick and easy access to main functions through the front face with direct key input.
• Complete configuration can be achieved through the front face or via software (EasyConfig).
General characteristics • Self-powered from sensing. • Wide voltage range (88-576VAC). • 24 VDC aux power supply (for optional use). • 2 latching relays. • Smart commissioning wizard. • IP65 degree of protection with gasket (accessory).
• 1000 Alarms and Events. • 6 fully configurable I/O. • Genset scheduler. • Door or back plate mounting.
• Main/Main, Main/Genset and Genset/Genset applications.
• Easyconfig configuration software. • RS485 Modbus communication. • Ethernet, SNMP, BACnet using DIRIS M-70 gateways. Includes Webserver.
• A DIRIS Digiware D-70 gateway can be utilised as a remote display for multiple ATyS C55/C65 controllers; the D-70 also provides Ethernet, SNMP & BACnet connectivity.
> Smart commissioning > Intuitive use > Hi-resolution LCD screen
Strong points
References
Description Reference
ATyS C55 – ATS controller (includes mounting kits) 1600 0055IP65 gasket for door cut-out (1) 1609 0001DIRIS Digiware M-50 multi-protocol Ethernet gateway 4829 0221DIRIS Digiware D-50 multipoint display, Ethernet output 4829 0204DIRIS Digiware M-70 communication gateway for Ethernet & Webserver 4829 0222DIRIS Digiware D-70 communication gateway for Ethernet & Webserver and multi-product display 4829 0203Double power supply - DPS 1599 4001
(1) The gasket provides an IP65 seal between the controller and the panel door; the front face (display & keys) is IP65 as standard.
> IEC 61010-2-201 > IEC 60947-6-1 > GB/T 14048.11 Annex C
Conformity to standards
atys
c_01
7_fro
nt.e
ps
Communication gateways
DIRIS Digiware M-70 & D-70
new
Double power supply - DPS*
* Optional for use with ATyS r, breakers and contactors without integrated DPS
> Commercial buildings > Applications: - Genset/Genset - Network/Genset - Network/Network - External/portable systems
The solution for
2 Catalogue 2020
ATyS C55ATS Controller
mid-level functionalities
1. Dashboard displays.2. Navigation keypad.3. Mimic LED indication.4. Lamp test button / LED info.5. AUTO mode select.6. TEST button.7. CONTROL mode select.8. Position orders
(only in CONTROL mode).9. Inhibit and communication
indication.10. Hi-res LCD screen.
Front panel Dimensions (mm)
240
180
158
6414
218
atys
c_00
6_a_
1_x_
cat.a
i
2
4
5
9
3
8 67
10 1
atys
c_01
7x
Terminals
1. Configuration USB2. 24 VDC aux power supply
(for optional use)3. 6 x inputs4. 2 x latching relay outputs5. 4 x relay outputs6. Source sensing
(110-480 ±20%)7. RS485 communication8. Replaceable RTC battery9. Hard reset buttonat
ysc_
010_
a_1_
x_ca
t
111412212422515452616462
L1 L2 L3 NL1 L2 L3 N
OUT 6 OUT 5 OUT 4 OUT 3 OUT 2 OUT 1USB DC
RESET
BATTERY
IN1IN2IN3IN4IN5IN6C+-
RS485 SOURCE 1
INPUTS
SOURCE 2NC-+
313432414442717273747576708281
2
3 4
1
9
8
7 6
5
Characteristics
Electrical characteristics
AC operating limits 110 - 480 VAC ±20%
Optional DC supply 24 VDC
Frequency limits 45 - 65 Hz
Power consumption < 10 W
Inputs 6, fully programmable
Outputs 6, fully programmable
Output relays 8 A AC15
EMC classification Class A and B
Impulse withstand 8/6 kV (1)
Overvoltage category CAT 3
Mechanical characteristics
Weight 1080 gr
Door cutout 220 x 160 mm
Protection degree IP65 with optional gasket
Operating temperature -30 … +70 ºC
Communications
Interface type RS485. 2 to 3 half duplex wires
Protocol MODBUS RTU
Baudrate programmable 1200 - 115200 bps
Display
Screen resolution 350 x 160 pixels
Event recorder 1000 events(1) 8 kV tested between phases of a different source and 6 kV tested between phases of a the same source.
3Catalogue 2020