Attività CAD-CAE
-
Upload
enrico-pisanu -
Category
Documents
-
view
86 -
download
1
Transcript of Attività CAD-CAE
Presented by: Alberto [email protected]
DESIGN MODELING CAPABILITIESPLM AND CAD TECHNOLOGIES
Partnership with:
OUR CAPABILITIES
• Customer support• Design modeling• Drawings• CAD Modelling• Structural Analysis• Computational Fluid Dynamics
Direct Customer support in cad Engineering development: • Internal Panel Rear Door
Experts Know-how combined top engineering technology available:
Customer may benefit concept to design :
problem solving in advanced engineering,
Draft analysis for maoulding
Clear and transparent communication on analysis settings and results
Design & Industrialization
OUR CAPABILITIES
Direct Customer support in cad Engineering development: • Beauty Cover for engine
Experts Know-how combined top engineering technology available:
Customer may benefit concept to design :
Feasibility of design
Study of layout for each application
Advanced simulation on moulding process
Resulting in efficient Co-design
OUR CAPABILITIES
from concept to design
Experts Know-how combined top engineering technology available:
Customer may benefit concept to design :
Feasibility of design
Study of layout for each application
Advanced simulation on moulding process
Resulting in efficient Co-design
Direct Customer support in cad Engineering development: • Beauty Cover for engine
OUR CAPABILITIES
From concept to Model Analysis
Direct Customer support in cad Engineering development: • Cap oil
Experts Know-how combined top engineering technology available:
Customer may benefit concept to design :
problem solving in advanced engineering,
Prototyping
Design & Industrialization
Resulting in and efficient Co design
OUR CAPABILITIES
Industrialization Optimization
DESIGN MODEL(CATIA V5, UG NX, PTC
CREO)
CAD ACTIVITIES DRAWING
• Feasibility • Design 3D model• 3D assembly
managment• Style design
STRUCTURAL MECHANICS
• Drawing 2D• Clearence analysis• Draft analysis • BOM material• Codep/Matrix
managment
MULTIPHYSICAL PROBLEMS
DYNAMICALLY LINKED
COMPUTATIONAL FLUID
DYNAMICS
OUR ACTIVITIES
Direct Customer support in Multiphysics Engineering problems: • structural and thermo-fluid dynamics
Experts Know-how combined top engineering technology available:
Customer may benefit from fast and economic:
problem solving in advanced engineering,
High quality in technical reports
Clear and transparent communication on analysis settings and results
Resulting in and efficient Co design
OUR CAPABILITIES
PROCEDURE:
• For each external force it’s computed the deformation field through static structural analysis and by a force balance the stiffness of the support plate is thus evaluated.
• The stiffness increase due to bolted joints preload is then taken under consideration resulting the best and less invasive stiffer parameter.
The displacement of the ICE cylinder head due to machining operation must be under control to guarantee the dimensional features within tolerances.
Example 1Stiffness Evaluation Of A Support Plate During Machining Of An Ice Cylinder Head
PROCEDURE:
• The temperature distribution inside a wickless heat pipe is evaluated by means of a CFD analysis involving multiphase flow and interaction between phases due to evaporation and condensation mass and energy transfer.
RESULTS:
• The thermodynamic is thus implemented through UDF’s properly linked to a solver;• The operating conditions of experimental setup are transduced into boundary conditions
to the numerical model.
This work was the result of a competitive research activity in cooperation with
Polytechnic of Turin
Example 2Two Phase Closed Loop Heat Pipe Temperature Distribution