Attaching Poly-Combo
3
The PCB (the green plate with the connectors) is carefully removed from the black bu>om plate The cable is pushed through the hole in the black bu>om plate. Connec@ng the Keypad to the PolyLock for the PolyCombo When the PolyCombo is a>ached to the door:
description
Â
Transcript of Attaching Poly-Combo
The PCB (the green plate with the connectors) is carefully removed from the black bu>om plate
The cable is pushed through the hole in the black bu>om plate.
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
When the Poly-‐Combo is a>ached to the door:
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
The cable is a>ached like this Slide the PCB carefully back into place, as when you received the Poly-‐Combo
Connec@ng the Keypad to the Poly-‐Lock for the Poly-‐Combo
When a>ached the red markings on the cable and the connector should be poin@ng the same direc@on Before you push the cable into place, the small brown “flaps” on the connector are Released. Now you are able to push the cable into Posi@on. Push the two brown “Flaps” back to lock the cable into place in the connector.
