For the latest version of this document, please visit us on the web at www.SumarUSA.com

Sumar International, Covina, CA 91723 | support@SumarUSA.com

Table of Contents:

Caution / Warning -------------------------------------------------------------------------------------------- 2

Overview of TV Mount & Tools Needed -------------------------------------------------------------- 3

Parts Diagram & Accessory Parts Included ---------------------------------------------------------- 4

Step 1: Attaching the Bracket Base Plate ------------------------------------------------------------- 5

Step 2-A: Mounting the Wall Bracket Plate to Concrete Wall ---------------------------------- 6

Step 2-B: Mounting the Wall Bracket Plate to Wood Wall -------------------------------------- 7

Step 3: Mounting the Arm to the Connect Plate --------------------------------------------------- 8

Step 4: Attaching TV Brackets ----------------------------------------------------------------------------- 9

Step 5: TV Bracket Extension Installation ----------------------------------------------------------- 10

Step 6: How to Adjust the Wall Mount --------------------------------------------------------------- 11

- 2

I would like to see a revised version of the Caution / Warning

text.

Caution / Warning

Supported Screen Size

Vesa Compatibility

Supported Weight

Tilting Angle

Extension Range

ADDITIONAL TOOLS (Not Included):

- 3

Pencil

# 2 PhillipsScrew Driver

Electric Drill Tape Measure7/32 (5.5mm)Wood Drill Bit

3/8 (10mm)Concrete Drill Bit

Hammer

Stud Finder

Socket Wrench

Overview of Parts & Tools

- 4

18” Wall Bracket Plate

Connection Plate

Plastic Cover

Safety Bolts

PARTS:

* Required for Concrete

A1 A2 A3 A4

A6

B2 B3

B1

C1 C2

* Level

2 pcs4 pcs

4 pcs

4 pcs 4 pcs 2 pcs 1 pc

4 pcs 4 pcs

4 pcs 4 pcs 4 pcsSafety Bolts

Plastic Covers

M4X12MM M5X12MM M6X12MM M6X16MM

Diagram & Accessory Parts Included

Attach the Television Mount Plate to the Arm using Washer & Nut with the Wrench Supplied (C2). Place the plastic covers on.

WARNING: Hand tighten Bolts, Nuts & Screws first.

- 5

Step 1: Attaching the TV Mount Plate

Use STEP 2-A ONLY when mounting to Concrete / Extermal Wall or Surface. Drill a pilot hole before the final hole. The drill depth should be the length of the anchor.

2”

7/32”

Option 1: The wall plate can be installed directly to the concrete wall.

Option 2: The adaptor for the wall plate can be added for horizontal adjustments.

- 6

Step 2-A: Mounting to Concrete Wall

Use STEP 2-B ONLY when mounting to WOOD Stud / Internal Wall or Surface. Drill depth should match the length of the mounting bolt.

2”

1/4”

Figure 1 Figure 2

Option 1: The wall plate can be mounted directly to the wood stud.

Fig 1-2

The wall mount arm base can be installed directly in the Concrete Wall.1. Mark the 4 holes cross-section pattern as in (Figure 1). Using the TV Bracket Based as the template holes.2. Drill ¼ “ holes, 2” deep.3. Insert the plastic anchors (B2) (Figure 2)4. Secure the Wall mount arm base with washer (B3) and bolt (B1) (Figure 2)5. Tighten all the screws

- 7

Step 2-B: Mounting to Wood Wall

Figure 3 Figure 4

Option 2: The adaptor for the wall plate can be added for horizontal arm adjustment.

Figure 3 & 4

The 18” wall bracket plate can be added for better installation.1. Mark the 4 holes square pattern as in (Figure 2B-3). Using the TV Wall Bracket as the template holes.2. Drill ¼ “ holes, 2” deep.3. Insert the Plastic anchors (B2)4. Secure the TV Wall Bracket with washer (B3) and bolt (B1)5. Attach the connection plate to the Wall mount arm base (Fig A), Secure with Washer & Nuts �������0RXQW�WKH�&RQQHFWLRQ�3ODWH�E\�KRRN�WKH�WRS�VLGH�ȴUVW�WR�WKH�ZDOO�EUDFNHW��)LJ�%�7. Adjust the location by sliding it to the left or right, secure with C1 screws (Fig C)8. Tighten all the screws

Step 2-B: Mounting to Wood Wall (cont.)

** WARNING: For Aluminum Stud Walls, we recommend professional installation.

The Connect Plate can be adjusted by shifting left and right. To lock the Connect Plate in position, tighten the two safety bolts.

Mount Arm to Connect Plate using A(x)

Wall Mount Arm Base

Connection Plate

Fig. A Fig. B Fig. C

Place the Wall Mount Arm Base onto the Connection plate and use the washer and lug nuts to secure. The Connection Plate can be adjusted by shifting it from left to right. To lock the Connection Plate in position, tighten the 2 safety bolts.

Mount the Wall Mount Arm to the wall bracket plate.

Mounting Arm to the Connect Plate

:DUQLQJ��+DQG�WLJKWHQ�EROWV�DQG�VFUHZV�E\�KDQG�ȴUVW�A – Attach the brackets to the TVB – Attach the Brackets to the TV with recessed back

Option 1-A

Flat TV VESA mount- Fig (4-1)�� ΖQVWDOO�WKH�ȵDW�VXUIDFH�RI�79�%UDFNHW�$UPV�DJDLQVW�WKH�79�9(6$�PRXQW�- Depending on TV brand, select A1, A2, A3, or A4.- A1, A2 required washer (A5)- Tighten all the screws

Option 1-B

Uneven/Recessed TV VESA mount- Fig (4-2)�� ΖQVWDOO�WKH�ȵDW�VXUIDFH�RI�79�%UDFNHW�$UPV�DJDLQVW�WKH�79�9(6$�PRXQW�- Use spacer (A6) in between the TV VESA and the TV Bracket Arms- Depending on TV brand, select A1, A2, A3, or A4.- A1, A2 required washer (A5)- Tighten all the screws

- Tighten all the screws

Step 4: Attaching Brackets to TV

If the LCD hole pattern is larger than the TV Bracket, you are required to use the TV Bracket Extender to install. VESA size 500x600 required TV Bracket Extender, Use the washer & Nut to secure it. (Fig 5)

Fig. 5

Step 5: TV Bracket Extension Installation

A) Arm Tension Adjustmentȏ� $GMXVW�WKH�DQJOH�E\�XVLQJ�WKH�ZUHQFK�WR�WLJKWHQ�WKH�QXW�ȏ� 7HQVLRQ�6FUHZ����|

B) B Tilt Adjustmentȏ� 5RWDWH�ΖQVWUXFWLRQV�IRU�$GMXVWPHQW�!������7XUQV�FRXQWHUFORFNZLVH�FORFNZLVHȏ� 'LVFODLPHU��79�KDV�WR�EH�ΖQVWDOOHG�EHIRUH�GRLQJ�DQ\�DGMXVWPHQWV

C) Cable management clip, cable routing access points

Step 6: How to Adjust the Wall Mount