ATP Form for VSAT ISAT- Kadugli

Acceptance Test Procedure Form

Section 1, General Site InformationMust be completed after every new installation, de-installation, and service upgrade or downgrade

Country: SudanCustomer Contract Details and Address

Contract Number:Company Name:

Site Address:Postal Code:P.O. Box No:

City:Country:

Point of Contact:Telephone:

Fax:Email:

Reason for Site Visit

New Installation Site upgrade

Purchase Order Number: De-installation

OtherEngineer/Technician(s) on Site

Company name: NetvSat Communications Co. Ltd.Tech/Eng name 1: Amro Awad OsmanTech/Eng name 2:Tech/Eng name 3:

First day on site: 6-Aug-2015 Total amount of man hours on site:Last day on site: 9-Aug-2015 Total amount of idle time (waiting hours):

Technical Site Details

Used satellite: AfricaSat 1A C Band Position: 46 East

West

Type of Service: C band

Ku band

Ka band Redundant system:

Yes No

SCPC TX/RX VSAT

DVB-RCS like Other, please describe:

Antenna: 1.2m

1.8m

2.4m

3.8m Type of antenna mount: NPM

PM


Customer Interface: RS449

V.35

RS422

RS232

Other

Terrestrial Line connected to satellite modem: Yes No

Section 2, Installed Equipment on SitePlease indicate in detail what equipment is installed on site. Complete this section after every installation, de-installation, and service upgrade or downgrade visit.

Parts Type Serial Number

Model Remarks

Antenna 2.4 C-BAND- Prodelin USED Mount NPM USED BUC/HPA NJT C-BAND 5W A02968C73 NJT5669F USED Typical power LNA/LNB/LNC C-BAND PAT 8215 USED Satellite Modem iDirect Evolution 171061 X3 Looks new IRD/Sat Receiver Interface UPS APC QS1316271616 SURT10000XLI AVS OthersSoftware Release

Comments:

Section 3, Inspection ChecklistThis section has to be completed after every new installation, and service upgrade or downgrade

Radio DetailsTX Center Freq: GHz RX Center Freq: GHz TX Gain: dB

Transmit Details - Carrier 1Carrier ID TX: TX Frequency: GHz Data rate: kbps

TX Polarization: Lin. Hor.

Lin. Ver. RHCP LHCP

TX Modulation: BPSK QPSK 8-PSK Other:

TX FEC: Viterbi Sequential

Reed-Solomon

Rate:

TX Clocking: Internal

External Other:

Receive Details - Carrier 1

Carrier ID RX: RX Frequency: GHz Data rate: kbps

RX Polarization: Lin. Hor.

Lin. Ver. RHCP LHCP

RX Modulation: BPSK QSPK 8-PSK Other:

RX FEC: Viterbi Sequential

TPC Rate:


RX Clocking: Internal

External Other:

Transmit Details - Carrier 2

Carrier ID TX: TX Frequency: GHz Data rate: kbps

TX Polarization: Lin. Hor.

Lin. Ver. RHCP LHCP

TX Modulation: BPSK QSPK 8-PSK Other:

TX FEC: Viterbi Sequential

Reed-Solomon

Rate:

TX Clocking: Internal

External Other:

Receive Details - Carrier 2

Carrier ID RX: RX Frequency: GHz Data rate: kbps

RX Polarization: Lin. Hor.

Lin. Ver. RHCP LHCP

RX Modulation: BPSK QSPK 8-PSK Other:

RX FEC: Viterbi Sequential

Reed-Solomon

Rate:

RX Clocking: Internal

External Other:

Outdoor Unit (ODU)1. Is all ODU equipment free of noticeable damage, e.g., scratches, dents, or other

physical defects?

Yes

No If no, please comment:

2. Is the antenna securely mounted and properly assembled? Yes

No

3. Are all the bolts and nuts tightened firmly? Yes

No

4. Is the mount free from misalignment, deflection, dents, holes or other structural problems that might create problems in high winds?

Yes

No

5. In case of a Non Penetrating Mount, is enough ballast installed? Yes

No

6. Does the fan in the radio (if any) operate properly? No fan Yes

No

7. Is the SLP box (if any) properly installed with all connections secure and wired according the FIM?

Yes

No

8. Is the feedhorn window intact so that no moisture can collect inside the feed horn? Yes

No

9. Is the de-ice system (if applicable) properly installed (and tested) with all connections secure and properly labeled? No de-ice

Yes

No

10. Is the radio (if any), LNB/C, antenna, SLP box (if any), and mount properly grounded


and is the ground cable from antenna mount to ground rod installed securely? Yes No

11. Are all cables tied down neatly? Yes

No12. Are UV resistant tie-wraps used?

Yes

No13. Is the roof clean? Yes

No14. Is their any vegetation or are there trees which may block the view in the future? Yes No

15. Have you made any pictures of the ODU Yes No

Inter Facility Link (IFL)

16. Are all connections correct, tight, and not stressed? Yes

No

17. Are all the connectors crimped properly and tested? Yes

No

18. Are electrical and mechanical connections weatherproofed and sealed? Yes

No

19. Are all cables labeled? Yes

No

20. Are all cables tied down neatly? Yes

No

21. Are the cables properly secured to the building or other structure so that movement is prevented during high winds?

Yes

No

Comments:

Indoor Unit (IDU)22. Is all indoor equipment free of noticeable damage, e.g., scratches, dents, or other

physical defects?

Yes

No If no, please comment:

23. Is all the indoor equipment properly grounded? Yes

No

24. Is a telephone line connected to the M & C equipment? Yes

No

25. Have you made any pictures of the IDU Yes No

Comments:

Dial-in number for the Monitor and Control (M&C) equipment

Country Code: Telephone Number:

Extension (if any):


Can Modem Dial-out of the country: Yes No

Comments:


Section 4, TestsThis section has to be completed after every new installation and upgrade.

Parameters which affect Satellite Link Performance

1. IFL cable loss: TX cable: dB RX cable:

dB

2. Total added attenuation: TX path: dB RX Path:

dB

3. Cross-pol isolation: dB Comments:

4. Satellite modem output: Modem 1: dBm Modem 2:

dBm

5. Satellite modem RX input: (Absolute receive level) Modem 1:

dBm Modem 2: dBm

6. Nominal received Eb/No: Modem 1: dB Modem 2: dB

7. Received (C+N)/N carrier 1: dB Received (C+N)/N carrier 2: dB

Spectrum analyzer settings: Span: MHz RBW: kHz VBW: kHz

8. Was any interference measured during testing: Yes NoIf Yes please describe:

Parameters which affect Data Performance9. Was an end-to-end test conducted at this visit? Yes No

BER Test performed: On own downlink With opposite station Both BER Test indicated following error rate: example: 2.07E-9 BER Test lasted for: Hours

10. Is a multiplexer connected to the modem? Yes NoIf Yes please indicate type of mux:

11. Was a multiplexer voice port test conducted at this visit? Yes No Multiplexer voice channel network looptest OK: Yes No Remote multiplexer voice channel looptest OK: Yes No

12. Was a ping test conducted at this visit? Yes No Connected Device:

LAN Router

Other:www.google.com

Ping round trip time: ms File transfer rate: Kbps

13. Was Monitor and Control system tested by the NOC? Yes No Were the results satisfactory? Yes No


When were the M&C tests performed? m/d/yyyy H:mm am/pm:14. Were any other tests conducted at this visit? Please indicate: 1dB test

Were the results satisfactory? Yes No

Comments: Fade Margin Test – From your location to remote siteTest performed with: TX-Carrier 1 TX-Carrier 2

TX- power [dB] local modem Remote (C+N)/N [dB] reading Remote Eb/No [dB] reading

Sync loss recorded at Eb/No reading: dB

Comments:

Fade Margin Test – From remote site to your locationTest performed with: RX-Carrier 1 RX-Carrier 2

TX- power [dB] remote modem Local (C+N)/N [dB] reading Local Eb/No [dB] reading

Sync loss recorded at Eb/No reading: dB

Comments:


Section 5 Customer Acceptance Complete this after every new visit

Service installed / repaired at site as per contract or Service Order specification

Engineers name: Amro Awad Osman

Engineers signature:

Company: NetvSat Communications Co. Ltd.

Date: 9-August-2015

Customer name:

Customer signature:

Position in Organization:

Customer Remarks:

Engineer’s Remarks: ODU is used. Link s stable.


Please attach photos as per below.

a) Line of siteb) Mount installationc) Right, Left, Front & Rear photos of the Antenna with mount.d) Cable path e) Earthling point from antenna to ground.f) Indoor cablingg) Modem lock with Serial No.

ATP Form for VSAT ISAT- Kadugli

Documents

Transcript of ATP Form for VSAT ISAT- Kadugli