ATM Links LAN Conn RNC196 Dn04128136 3-0 En

8/6/2019 ATM Links LAN Conn RNC196 Dn04128136 3-0 En

http://slidepdf.com/reader/full/atm-links-lan-conn-rnc196-dn04128136-3-0-en 1/54

Use of ATM links and LAN

connections in RNC196

DN04128136Issue 3-0 en

# Nokia Siemens Networks 1 (54)



The information in this document is subject to change without notice and describes only theproduct defined in the introduction of this documentation. This documentation is intended for theuse of Nokia Siemens Networks customers only for the purposes of the agreement under whichthe document is submitted, and no part of it may be used, reproduced, modified or transmitted inany form or means without the prior written permission of Nokia Siemens Networks. Thedocumentation has been prepared to be used by professional and properly trained personnel,and the customer assumes full responsibility when using it. Nokia Siemens Networks welcomescustomer comments as part of the process of continuous development and improvement of thedocumentation.

The information or statements given in this documentation concerning the suitability, capacity, or performance of the mentioned hardware or software products are given “as is” and all liabilityarising in connection with such hardware or software products shall be defined conclusively andfinally in a separate agreement between Nokia Siemens Networks and the customer. However,Nokia Siemens Networks has made all reasonable efforts to ensure that the instructionscontained in the document are adequate and free of material errors and omissions. NokiaSiemens Networks will, if deemed necessary by Nokia Siemens Networks, explain issues which

may not be covered by the document.

Nokia Siemens Networks will correct errors in this documentation as soon as possible. IN NOEVENT WILL NOKIA SIEMENS NETWORKS BE LIABLE FOR ERRORS IN THISDOCUMENTATION OR FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO SPECIAL,DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL OR ANY LOSSES, SUCH AS BUTNOT LIMITED TO LOSS OF PROFIT, REVENUE, BUSINESS INTERRUPTION, BUSINESSOPPORTUNITY OR DATA, THAT MAY ARISE FROM THE USE OF THIS DOCUMENT OR THEINFORMATION IN IT.

This documentation and the product it describes are considered protected by copyrights andother intellectual property rights according to the applicable laws.

The wave logo is a trademark of Nokia Siemens Networks Oy. Nokia is a registered trademark of Nokia Corporation. Siemens is a registered trademark of Siemens AG.

Other product names mentioned in this document may be trademarks of their respective owners,and they are mentioned for identification purposes only.

Copyright © Nokia Siemens Networks 2009. All rights reserved.

2 (54) # Nokia Siemens Networks DN04128136Issue 3-0 en

Use of ATM links and LAN connections in RNC196



Contents

Contents 3

List of tables 4

List of figures 6

Summary of changes 7

1 About Use of ATM links and LAN connections in RNC196 91.1 Introduction to ATM links 91.2 Notations used in the lists of ATM links 10

1.3 Notations used in the LAN connection list 12

2 Use of SFU ATM links 15

3 Use of MXU ATM links 233.1 Use of MXU ATM links in RNC196/196 233.2 Use of MXU ATM links in RNC196/300 and RNC196/450 36

4 List of LAN connections 53



Contents



List of tables

Table 1. Explanation of columns in the list of SFU ATM links 10

Table 2. Explanation of columns in the list of MXU ATM links 11

Table 3. Explanation of columns in the list of LAN links 12

Table 4. SFU use for SFU 0 and SFU 1 in RNC196/196 15

Table 5. SFU use for SFU 0 and SFU 1 in RNC196/300 and RNC196/450 18

Table 6. Multiplexer port use for MXU 0 and MXU 1 in RNC196/196 (RNACsubracks 1 and 2) 23

Table 7. Multiplexer port use for MXU 2 and MXU 3 in RNC196/196 (RNAC subrack3) 25

Table 8. Multiplexer port use for MXU 4 and MXU 5 in RNC196 (RNAC subrack4) 27

Table 9. Multiplexer port use for MXU 6 and MXU 7 in RNC196/196 (RNBC subrack1) 29

Table 10. Multiplexer port use for MXU 8 and MXU 9 in RNC196/196 (RNBC subrack2) 31

Table 11. Multiplexer port use for MXU 10 and MXU 11 in RNC196/196 (RNBC

subrack 3) 33

Table 12. Multiplexer port use for MXU 12 and MXU 13 in RNC196/196 (RNBCsubrack 4) 34

Table 13. Multiplexer port use for MXU 0 and MXU 1 in RNC196/300 and RNC196/ 450 (RNAC subrack 1) 36

Table 14. Multiplexer port use for MXU 14 and MXU 15 in RNC196/300 andRNC196/450 (RNAC subrack 2) 38



Table 17. Multiplexer port use for MXU 6 and MXU 7 in RNC196/300 and RNC196/ 450 (RNBC subrack 1) 44

Table 18. Multiplexer port use for MXU 8 and MXU 9 in RNC196/300 and RNC196/ 450 (RNBC subrack 2) 46

Table 19. Multiplexer port use for MXU 10 and MXU 11 in RNC196/300 andRNC196/450 (RNBC subrack 3) 47

Table 20. Multiplexer port use for MXU 12 and MXU 13 in RNC196/300 and





RNC196/450 (RNBC subrack 4) 49

Table 21. LAN port use of ESA24 (RNAC, with ESA24 0 in subrack 1 and ESA24 1in subrack 2) 53



List of tables



List of figures





Summary of changes

Changes between document issues are cumulative. Therefore, the latest

document issue contains all changes made to previous issues.

Changes for issue 3-0

Minor editorial corrections.

Changes for issue 2-1

CCP18-C is used as the main CPU. CCP18-A is needed for OMU since

USB ports are needed for backup purposes.

Changes for issue 2 –0

Document updated with the following RN2.2 upgrades and extensions for

RNC196:

. capacity step RNC196/300 (step 6)

. capacity step RNC196/450 (step 7)

. redundant ESA24 addition

.

OMU upgrade with CCP18-A

. additional NISx pair upgrade

Notation RNC196/196 is used for steps 1-5. Notation RNC196/300 and

RNC196/450 is used for capacity steps 6 and 7.


Port connections for NISx 4 –7 were added in table SFU use for SFU 0 and

SFU 1.



Summary of changes




Minor corrections.


First issue.





1 About Use of ATM links and LAN

connections in RNC196

Use of ATM links and LAN connections in RNC196 provides lists of the

ATM links provided by the ATM Switching Fabric Unit (SFU) and the ATM

links distributed via Multiplexer Units (MXU) in the RNC.

For upgrades from previously delivered RNCs (RNC196), two new

capacity steps are introduced: from 196 Mbit/s up to 300 Mbit/s (capacity

step 6) and from 196 Mbit/s up to 450 Mbit/s (capacity step 7). For more

information on the capacity steps, see Cabinet and subrack descriptions

for RNC196 in Engineering Description.

Use of ATM links and LAN connections in RNC196 applies to capacity

steps 1 - 7. The tables in section Use of MXU ATM links are divided as

follows:

. RNC196/196 (capacity steps 1 - 5)

. RNC196/300 (capacity step 6) and RNC196/450 (capacity step 7)

For information on the configurations and equipping of the RNC, see

Equipment Lists for RNC , Cable Lists for RNC, and Engineering

Description .

1.1 Introduction to ATM links

The ATM Switching Fabric Unit (SFU) provides part of the ATM cell

switching function. It provides 2N redundancy, full accessibility, and it is

non-blocking at ATM connection level (that is, if input and output capacities

are available, the connection can be established). The ATM Switching



About Use of ATM links and LAN connections in RNC196



Fabric supports point-to-point and point-to-multipoint connection

topologies, as well as differentiated handling of various ATM servicecategories. High capacity network interface units and ATM Multiplexer

units are connected to the redundant SFU.

The ATM Multiplexer (MXU) multiplexes traffic coming from tributary units

towards the switching fabric. This enables the efficient use of switching

resources for low bit rate network interface units and computer units with

small to moderate bandwidth requirements. The ATM Multiplexer also

includes part of the ATM layer processing functionality, such as policing,

statistics, OAM, buffer management and scheduling.

The ATM Switching Fabric Unit (SFU / SF10) provides 16 pcs of duplicated

(622 Mbit/s) asyncronous transfer mode ports.

The ATM Multiplexer Unit (MXU / MX622-D) provides 19 pcs (0-155 Mbit/s)

asyncronous transfer mode ports.

1.2 Notations used in the lists of ATM links

The ATM links are shown in the form of tables, one type for SFU ATM links

and another for MXU ATM links.

SFU table

The table has two main columns, SFU and Functional unit (FU) using the

port, and a note column. The main columns are divided to subcolumns.

Table 1. Explanation of columns in the list of SFU ATM links

SFU FU using the port Note

Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

The five subcolumns for SFU:

. Port no. indicates the index number of the high speed port (0-15).

. No. indicates the index number of SFU (SFU 0 or SFU 1).





. Slot indicates the SFU's equipping place, subrack and slot.

. Cabling position indicates the cabling positions in two ways:. SW = cable connection coordinate used in hardware

configuration management

. HW = physical cabling equipping position

The five subcolumns for the Functional unit (FU) using the port:

. FU indicates the Functional Unit name including index number (for

example, OMU 0).

. Plug-in unit indicates the name of the plug-in unit which can be used.

. Slot indicates the equipping place number of the plug-in unit.

. Cabling position indicates the cabling positions in two ways:

. SW = cable connection coordinate used in hardware



MXU table

The table has two main columns, MXU and Functional unit (FU) using the

port, and a note column. The main columns are divided to subcolumns.

Table 2. Explanation of columns in the list of MXU ATM links

MXU FU using the port Note

Port

no.

No. Slot Cabling

position

Tributary unit Plug-in

unit

Slot Cabling

position

SW HW SW HW

The five subcolumns for MXU:

. Port no. indicates the index number of the port (0-18).

. No. indicates the index number of MXU (0 –15).

. Slot indicates the MXU's equipping place, subrack and slot.










The five subcolumns for the Functional unit (FU) using the port:

. Tributary unit indicates the Functional Unit name including index

number (for example, OMU 0).

. Plug-in unit indicates the name of the plug-in unit which can be used.

. Slot indicates the equipping place number of the plug-in unit.





1.3 Notations used in the LAN connection list

The LAN links are shown in the form of a table. The table has two main

columns, ESA24 and LAN using the port, and a note column. The main

columns are divided to subcolumns.

Table 3. Explanation of columns in the list of LAN links

ESA24 FU using the LAN port Note

Port no. No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

The five subcolumns for ESA24:

. Port no. indicates the software port index number, 1/1/1 - 1/1/24.

. No. indicates the index number of ESA24.

. Slot indicates the ESA's equipping place, subrack and slot.


. SW = cable connection coordinate used in hardwareconfiguration management


The five subcolumns for LAN User:





. FU indicates the Functional Unit name including index number (for

example, OMU 0).. Plug-in unit indicates the name of the plug-in unit (for example,

CCP10).

. Slot indicates the FU's equipping place, subrack and slot.










2 Use of SFU ATM links

The following table provides a list of all the SFU ATM links. The Switching

Fabric Unit (SF10) provides 16 ATM switch ports which are divided amongfunctional units as shown in the following table.

Note

In some cases, one subrack slot may house different plug-in units /

functional units using the same SFU port. In the table below, the

alternative plug-in unit / functional unit equipping options are presented

in the same row according to the SFU port.

RNC can be configured to meet different capacity requirements. Thecapacity extensions are implemented through different capacity steps. The

SFU ATM links have been divided into two tables:

. SFU use for SFU 0 and SFU 1 in RNC196/196

. SFU use for SFU 0 and SFU 1 in RNC196/300 and RNC196/450

Table 4. SFU use for SFU 0 and SFU 1 in RNC196/196


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P0A SFU 0

SFU 1

1 –2 B84 2.4J MXU 0 MX622-D

MX622 –C

9 B76

B80

4A

4E

P0B SFU 0

SFU 1

1 –2 B96 2.4V MXU 1 MX622-D

MX622 –C

11 B76

B80

4A

4E



Use of SFU ATM links



Table 4. SFU use for SFU 0 and SFU 1 in RNC196/196 (cont.)


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P1A SFU 0

SFU 1

1 –2 B82 2.4G MXU 2 MX622-D

MX622 –C

9 B76

B80

4A

4E

P1B SFU 0

SFU 1

1 –2 B94 2.4T MXU 3 MX622-D

MX622 –C

11 B76

B80

4A

4E

P2A SFU 0

SFU 1

1 –2 B80 2.4E MXU 4 MX622-D

MX622 –C

9 B76

B80

4A

4E

P2B SFU 0

SFU 1

1 –2 B92 2.4R MXU 5 MX622-D

MX622 –C

11 B76

B80

4A

4E

P3A SFU 0

SFU 1

1 –2 B78 2.4C MXU 6 MX622-D

MX622 –C

9 B76

B80

4A

4E

P3B SFU 0

SFU 1

1 –2 B90 2.4P MXU 7 MX622-D

MX622 –

C

11 B76

B80

4A

4E

P4A SFU 0

SFU 1

1 –2 B68 2.3S MXU 8 MX622-D

MX622 –C

9 B76

B80

4A

4E

P4B SFU 0

SFU 1

1 –2 B76 2.4A MXU 9 MX622-D

MX622 –C

11 B76

B80

4A

4E

P5A SFU 0

SFU 1

1 –2 B66 2.3Q MXU 10 MX622-D

MX622 –C

9 B76

B80

4A

4E

P5B SFU 0

SFU 1

1 –2 B74 2.3Y MXU 11 MX622-D

MX622 –C

11 B76

B80

4A

4E

P6A SFU 0

SFU 1

1 –2 B64 2.3O MXU 12 MX622-D

MX622 –C

9 B76

B80

4A

4E

P6B SFU 0

SFU 1

1 –2 B72 2.3W MXU 13 MX622-D

MX622 –C

11 B76

B80

4A

4E

P7A SFU 0

SFU 1

1 –2 B62 2.3M – – – – – 1)







Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P7B SFU 0

SFU 1

1 –2 B70 2.3U – – – – – 1)

P8A SFU 0

SFU 1

1 –2 B52 2.3B – – – – – 1)

P8B SFU 0

SFU 1

1 –2 B60 2.3K – – – – – 1)

P9A SFU 0

SFU 1

1 –2 B50 2.2Z NIS1 0

NIS1P 0

NI4S1 –B 5 B78

B80

4C

4E

P9B SFU 0

SFU 1

1 –2 B58 2.3H NIS1P 1 NI4S1 –B 5 B78

B80

4C

4E

2)

P10A SFU 0

SFU 1

1 –2 B48 2.2X NIS1 1 NI4S1 –B 5 B78

B80

4C

4E

P10B SFU 0

SFU 1

1 –2 B56 2.3F – – – – – 1)

P11A SFU 0

SFU 1

1 –2 B46 2.2V NIS1 2

NIS1P 2

NI4S1 –B 18 B78

B80

4C

4E

P11B SFU 0

SFU 1

1 –2 B54 2.3D NIS1P 3 NI4S1 –B 18 B78

B80

4C

4E

2)

P12A SFU 0

SFU 1

1 –2 B36 2.2L NIS1 3 NI4S1 –B 18 B78

B80

4C

4E

P12B SFU 0

SFU 1

1 –2 B44 2.2T – – – – – 1)

P13A SFU 0

SFU 1

1 –2 B34 2.2J NIS1 4

NIS1P 4

NI4S1 –B 3 B78

B80

4C

4E

P13B SFU 0

SFU 1

1 –2 B42 2.2R NIS1P 5 NI4S1 –B 3 B78

B80

4C

4E








Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P14A SFU 0

SFU 1

1 –2 B32 2.2G NIS1 6

NIS1P 6

NI4S1 –B 4 B78

B80

4C

4E

P14B SFU 0

SFU 1

1 –2 B40 2.2P NIS1P 7 NI4S1 –B 4 B78

B80

4C

4E

P15A SFU 0

SFU 1

1 –2 B30 2.2E – – – – – 1)

P15B SFU 0

SFU 1

1 –2 B38 2.2N – – – – – 1)

1) SFU port is not in use.

2) If 2N redundancy is not in use (protection mode), NIS1 FUs with odd index numbers are not equipped.

Table 5. SFU use for SFU 0 and SFU 1 in RNC196/300 and RNC196/450


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P0A SFU 0

SFU 1

1 –2 B84 2.4J MXU 0 MX622 –D 9 B76

B80

4A

4E

P0B SFU 0

SFU 1

1 –2 B96 2.4V MXU 1 MX622 –D 9 B76

B80

4A

4E

P1A SFU 0

SFU 1

1 –2 B82 2.4G MXU 2 MX622 –D 9 B76

B80

4A

4E

P1B SFU 0

SFU 1

1 –2 B94 2.4T MXU 3 MX622 –D 11 B76

B80

4A

4E






(cont.)


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P2A SFU 0

SFU 1

1 –2 B80 2.4E MXU 4 MX622 –D 9 B76

B80

4A

4E

P2B SFU 0

SFU 1

1 –2 B92 2.4R MXU 5 MX622 –D 11 B76

B80

4A

4E

P3A SFU 0

SFU 1

1 –2 B78 2.4C MXU 6 MX622 –D 9 B76

B80

4A

4E

P3B SFU 0

SFU 1

1 –2 B90 2.4P MXU 7 MX622 –D 11 B76

B80

4A

4E

P4A SFU 0

SFU 1

1 –2 B68 2.3S MXU 8 MX622 –D 9 B76

B80

4A

4E

P4B SFU 0

SFU 1

1 –2 B76 2.4A MXU 9 MX622 –D 11 B76

B80

4A

4E

P5A SFU 0

SFU 1

1 –2 B66 2.3Q MXU 10 MX622 –D 9 B76

B80

4A

4E

P5B SFU 0

SFU 1

1 –2 B74 2.3Y MXU 11 MX622 –D 11 B76

B80

4A

4E

P6A SFU 0

SFU 1

1 –2 B64 2.3O MXU 12 MX622 –D 9 B76

B80

4A

4E

P6B SFU 0

SFU 1

1 –2 B72 2.3W MXU 13 MX622 –D 11 B76

B80

4A

4E

P7A SFU 0

SFU 1

1 –2 B62 2.3M MXU 14 MX622 –D 9 B76

B80

4A

4E

P7B SFU 0

SFU 1

1 –2 B70 2.3U MXU 15 MX622 –D 11 B76

B80

4A

4E







(cont.)


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P8A SFU 0

SFU 1

1 –2 B52 2.3B NIS1P 10 NI4S1-B 18 B76

B80

4A

4E

P8B SFU 0

SFU 1

1 –2 B60 2.3K NIS1P 11 NI4S1-B

–

18 B76

B80

4A

4E

P9A SFU 0

SFU 1

1 –2 B50 2.2Z NIS1 0

NIS1P 0

NI4S1 –B 5 B78

B80

4C

4E

P9B SFU 0

SFU 1

1 –2 B58 2.3H NIS1P 1 NI4S1 –B 5 B76

B80

4C

4E

P10A SFU 0

SFU 1

1 –2 B48 2.2X NIS1 1 NI4S1 –B 5 B78

B80

4C

4E

P10B SFU 0

SFU 1

1 –2 B56 2.3F – – – – – 1)

P11A SFU 0

SFU 1

1 –2 B46 2.2V NIS1 2

NIS1P 2

NI4S1 –B 18 B78

B80

4C

4E

P11B SFU 0

SFU 1

1 –2 B54 2.3D NIS1P 3 NI4S1 –B 18 B76

B80

4C

4E

P12A SFU 0

SFU 1

1 –2 B36 2.2L NIS1 3 NI4S1 –B 18 B78

B80

4C

4E

P12B SFU 0

SFU 1

1 –2 B44 2.2T – – – – – 1)

P13A SFU 0

SFU 1

1 –2 B34 2.2J NIS1 4

NIS1P 4

NI4S1 –B 17 B76

B80

4C

4E

P13B SFU 0

SFU 1

1 –2 B42 2.2R NIS1P 5 NI4S1 –B 17 B76

B80

4C

4E






(cont.)


Port

no.

No. Slot Cabling

position

FU Plug-in

unit

Slot Cabling

position

SW HW SW HW

P14A SFU 0

SFU 1

1 –2 B32 2.2G NIS1 6

NIS1P 6

NI4S1 –B 18 B76

B80

4C

4E

P14B SFU 0

SFU 1

1 –2 B40 2.2P NIS1P 7 NI4S1 –B 18 B76

B80

4C

4E

P15A SFU 0

SFU 1

1 –2 B30 2.2E NIS1P 8 NI4S1 –B 17 B76

B80

4C

4E

P15B SFU 0

SFU 1

1 –2 B38 2.2N NIS1P 9 NI4S1 –B 17 B76

B80

4C

4E

1) SFU port is not in use.






3 Use of MXU ATM links

The following tables provide a list of all the MXU ATM links. The

Multiplexer Unit (MXU) provides 19 ATM ports which are divided amongtributary functional units as shown in the following tables.

RNC can be configured to meet different capacity requirements. The

capacity extensions are implemented through different capacity steps. The

MXU ATM links have been divided into two sections:

. Use of MXU ATM links in RNC196/196 covers capacity steps 1 - 5

. Use of MXU ATM links in RNC196/300 and RNC196/450 covers

capacity steps 6 and 7. In capacity step 7, the units are of the newestvariant type.

3.1 Use of MXU ATM links in RNC196/196

Table 6. Multiplexer port use for MXU 0 and MXU 1 in RNC196/196 (RNAC

subracks 1 and 2)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 0

MXU 1

9

9

B96 4V SFU 0 SF10 1 B76

B77

4A

4B

1 MXU 0

MXU 1

9

9

B97 4W SFU 1 SF10 1 B76

B77

4A

4B

2 MXU 0

MXU 1

9

9

B98 4X - - - - - 1)



Use of MXU ATM links




subracks 1 and 2) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

14 MXU 0

MXU 1

9

9

B111 5L - - - - - 1)

15 MXU 0

MXU 1

9

9

B112 5M - - - - - 1)

16 MXU 0

MXU 1

9

9

B113 5N - - - - - 1)

17 MXU 0

MXU 1

9

9

B114 5O - - - - - 1)

18 MXU 0

MXU 1

9

9

B115 5P - - - - - 1)

1) MXU port is not in use.

2) MXUs are in different subracks.


subrack 3)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 2

MXU 3

9

11

B96 4V DMCU 3 CDSP-C 12 B76

B77

4A

4B

1 MXU 2

MXU 3

9

11

B97 4W DMCU 4 CDSP-C 13 B76

B77

4A

4B

2 MXU 2

MXU 3

9

11

B98 4X DMCU 5 CDSP-C 14 B76

B77

4A

4B

3 MXU 2

MXU 3

9

11

B99 4Y A2SU 1 AL2S-D

AL2S-B

15 B76

B77

4A

4B







subrack 3) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

4 MXU 2

MXU 3

9

11

B100 4Z - SHIM25 16 B76

B77

4A

4B

1)

5 MXU 2

MXU 3

9

11

B101 5A DMCU 2 CDSP-C 8 B76

B77

4A

4B

6 MXU 2

MXU 3

9

11

B102 5B DMCU 1 CDSP-C 7 B76

B77

4A

4B

7 MXU 2

MXU 3

9

11

B103 5C DMCU 0 CDSP-C 6 B76

B77

4A

4B

8 MXU 2

MXU 3

9

11

B104 5D ICSU 2 CCP18-C

CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 2

MXU 3

9

11

B105 5E ICSU 1 CCP18-C

CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 2

MXU 3

9

11

B107 5G ICSU 0 CCP18-C

CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 2

MXU 3

9

11

B108 5H NIP1 1 NI16P1A 2 B76

B77

4A

4B

12 MXU 2

MXU 3

9

11

B109 5J NIP1 0 NI16P1A 1 B76

B77

4A

4B

13 MXU 2 9 B110 5K MXU 3 MX622-D

MX622 –C

11 B121 5V

MXU 3 11 B110 5K MXU 2 MX622-D

MX622 –C

9 B121 5V

14 MXU 2

MXU 3

9

11

B111 5L GTPU 0 CCP18-C

CCP18-A

CCP10

17 B76

B77

4A

4B






subrack 3) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

15 MXU 2

MXU 3

9

11

B112 5M - - - - - 1)

16 MXU 2

MXU 3

9

11

B113 5N - - - - - 1)

17 MXU 2

MXU 3

9

11

B114 5O - - - - - 1)

18 MXU 2

MXU 3

9

11

B115 5P - - - - - 1)


Table 8. Multiplexer port use for MXU 4 and MXU 5 in RNC196 (RNACsubrack 4)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 4

MXU 5

9

11


B77

4A

4B

1 MXU 4

MXU 5

9

11


B77

4A

4B

2 MXU 4

MXU 5

9

11


B77

4A

4B

3 MXU 4

MXU 5

9

11


AL2S-B

15 B76

B77

4A

4B

4 MXU 4

MXU 5

9

11

B100 4Z ICSU 6 CCP18-C

CCP18-A

CCP10

16 B76

B77

4A

4B






Table 8. Multiplexer port use for MXU 4 and MXU 5 in RNC196 (RNAC

subrack 4) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

5 MXU 4

MXU 5

9

11

B101 5A DMCU 8 CCP18-C

CCP18-A

CCP10

8 B76

B77

4A

4B

6 MXU 4

MXU 5

9

11


B77

4A

4B

7 MXU 4

MXU 5

9

11


B77

4A

4B

8 MXU 4

MXU 5

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 4

MXU 5

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 4

MXU 5

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 4

MXU 5

9

11

B108 5H NIP1 3 NI16P1A 2 B76

B77

4A

4B

12 MXU 4

MXU 5

9

11

B109 5J NIP1 2 NI16P1A 1 B76

B77

4A

4B

13 MXU 4 9 B110 5K MXU 5 MX622-D

MX622 –C

11 B121 5V

MXU 5 11 B110 5K MXU 4 MX622-D

MX622 –C

9 B121 5V

14 MXU 4

MXU 5

9

11


CCP18-A

CCP10

17 B76

B77

4A

4B

15 MXU 4

MXU 5

9

11

B112 5M - - - - - 1)





Table 8. Multiplexer port use for MXU 4 and MXU 5 in RNC196 (RNAC

subrack 4) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

16 MXU 4

MXU 5

9

11

B113 5N - - - - - 1)

17 MXU 4

MXU 5

9

11

B114 5O - - - - - 1)

18 MXU 4

MXU 5

9

11

B115 5P - - - - - 1)



subrack 1)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 6

MXU 7

9

11


B77

4A

4B

1 MXU 6

MXU 7

9

11


B77

4A

4B

2 MXU 6

MXU 7

9

11


B77

4A

4B

3 MXU 6

MXU 7

9

11


AL2S-B

15 B76

B77

4A

4B

4 MXU 6

MXU 7

9

11

B100 4Z GTPU 2 CCP18-C

CCP18-A

CCP10

16 B76

B77

4A

4B

5 MXU 6

MXU 7

9

11


B77

4A

4B







subrack 1) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

6 MXU 6

MXU 7

9

11


B77

4A

4B

7 MXU 6

MXU 7

9

11


B77

4A

4B

8 MXU 6

MXU 7

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 6

MXU 7

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 6

MXU 7

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 6

MXU 7

9

11

B108 5H NIP1 5 NI16P1A 2 B76

B77

4A

4B

12 MXU 6

MXU 7

9

11

B109 5J NIP1 4 NI16P1A 1 B76

B77

4A

4B

13 MXU 6 9 B110 5K MXU 7 MX622-D

MX622 –C

11 B121 5V

MXU 7 11 B110 5K MXU 6 MX622-D

MX622 –C

9 B121 5V

14 MXU 6

MXU 7

9

11

B111 5L DMCU 18 CDSP-C 17 B76

B77

4A

4B

15 MXU 6

MXU 7

9

11

B112 5M DMCU 19 CDSP-C 18 B76

B77

4A

4B

16 MXU 6

MXU 7

9

11

B113 5N - - - - - 1)

17 MXU 6

MXU 7

9

11

B114 5O - - - - - 1)






subrack 1) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

18 MXU 6

MXU 7

9

11

B115 5P - - - - - 1)



subrack 2)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 8

MXU 9

9

11


B77

4A

4B

1 MXU 8

MXU 9

9

11


B77

4A

4B

2 MXU 8

MXU 9

9

11


B77

4A

4B

3 MXU 8

MXU 9

9

11


AL2S-B

15 B76

B77

4A

4B

4 MXU 8

MXU 9

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

5 MXU 8

MXU 9

9

11


B77

4A

4B

6 MXU 8

MXU 9

9

11


B77

4A

4B

7 MXU 8

MXU 9

9

11


B77

4A

4B







subrack 2) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

8 MXU 8

MXU 9

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 8

MXU 9

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 8

MXU 9

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 8

MXU 9

9

11

B108 5H NIP1 7 NI16P1A 2 B76

B77

4A

4B

12 MXU 8

MXU 9

9

11

B109 5J NIP1 6 NI16P1A 1 B76

B77

4A

4B

13 MXU 8 9 B110 5K MXU 9 MX622-D

MX622 –C

11 B121 5V

MXU 9 11 B110 5K MXU 8 MX622-D

MX622 –C

9 B121 5V

14 MXU 8

MXU 9

9

11


B77

4A

4B

15 MXU 8

MXU 9

9

11


B77

4A

4B

16 MXU 8

MXU 9

9

11

B113 5N - - - - - 1)

17 MXU 8

MXU 9

9

11

B114 5O - - - - - 1)

18 MXU 8

MXU 9

9

11

B115 5P - - - - - 1)







subrack 3)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 10

MXU 11

9

11


B77

4A

4B

1 MXU 10

MXU 11

9

11


B77

4A

4B

2 MXU 10

MXU 11

9

11


B77

4A

4B

3 MXU 10

MXU 11

9

11


AL2S-B

15 B76

B77

4A

4B

4 MXU 10

MXU 11

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

5 MXU 10

MXU 11

9

11


B77

4A

4B

6 MXU 10

MXU 11

9

11


B77

4A

4B

7 MXU 10

MXU 11

9

11


B77

4A

4B

8 MXU 10

MXU 11

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 10

MXU 11

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 10

MXU 11

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 10

MXU 11

9

11

B108 5H NIP1 9 NI16P1A 2 B76

B77

4A

4B







subrack 3) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

12 MXU 10

MXU 11

9

11

B109 5J NIP1 8 NI16P1A 1 B76

B77

4A

4B

13 MXU 10 9 B110 5K MXU 11 MX622-D

MX622 –

C

11 B121 5V

MXU 11 11 B110 5K MXU 10 MX622-D

MX622 –C

9 B121 5V

14 MXU 10

MXU 11

9

11


B77

4A

4B

15 MXU 10

MXU 11

9

11


B77

4A

4B

16 MXU 10

MXU 11

9

11

B113 5N - - - - - 1)

17 MXU 10

MXU 11

9

11

B114 5O - - - - - 1)

18 MXU 10

MXU 11

9

11

B115 5P - - - - - 1)



subrack 4)


Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

0 MXU 12

MXU 13

9

11


B77

4A

4B

1 MXU 12

MXU 13

9

11


B77

4A

4B






subrack 4) (cont.)


Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

2 MXU 12

MXU 13

9

11


B77

4A

4B

3 MXU 12

MXU 13

9

11


AL2S-B

15 B76

B77

4A

4B

4 MXU 12

MXU 13

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

5 MXU 12

MXU 13

9

11


B77

4A

4B

6 MXU 12

MXU 13

9

11


B77

4A

4B

7 MXU 12

MXU 13

9

11


B77

4A

4B

8 MXU 12

MXU 13

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

9 MXU 12

MXU 13

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

10 MXU 12

MXU 13

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

11 MXU 12

MXU 13

9

11

B108 5H NIP1 11 NI16P1A 2 B76

B77

4A

4B

12 MXU 12

MXU 13

9

11

B109 5J NIP1 10 NI16P1A 1 B76

B77

4A

4B

13 MXU 12 9 B110 5K MXU 13 MX622-D

MX622 –C

11 B121 5V







subrack 4) (cont.)


Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

MXU 13 11 B110 5K MXU 12 MX622-D

MX622 –C

9 B121 5V

14 MXU 12

MXU 13

9

11


B77

4A

4B

15 MXU 12

MXU 13

9

11


B77

4A

4B

16 MXU 12

MXU 13

9

11

B113 5N - - - - - 1)

17 MXU 12

MXU 13

9

11

B114 5O - - - - - 1)

18 MXU 12

MXU 13

9

11

B115 5P - - - - - 1)


3.2 Use of MXU ATM links in RNC196/300 and RNC196/ 450

The use of MXU ATM links in RNC196/300, that is, capacity step 6 and

RNC196/450, that is, capacity step 7, is displayed in the tables below. The

difference between capacity steps 6 and 7 is that the newest variant must

always be chosen with capacity step 7 (RNC196/450).


RNC196/450 (RNAC subrack 1)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW






RNC196/450 (RNAC subrack 1) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 0

MXU 1

9

11

B96 4V SFU 0 SF10 1 B76

B77

4A

4B

1 MXU 0

MXU 1

9

11


B77

4A

4B

2 MXU 0

MXU 1

9

11


B77

4A

4B

3 MXU 0

MXU 1

9

11


AL2S-B

5 - - 3)

4 MXU 0

MXU 1

9

11

B100 4Z A2SU 0 AL2S-D

AL2S-B

6 B76

B77

4A

4B

3)

5 MXU 0

MXU 1

9

11

B101 5A - - - - - 1)

6 MXU 0

MXU 1

9

11

B102 5B RRMU 0 CCP18-C

CCP18-A

CCP10

7 B76

B77

4A

4B

3)

7 MXU 0

MXU 1

9

11

B103 5C - - - - - 1)

8 MXU 0

MXU 1

9

11

B104 5D RSMU 0 CCP18-C

CCP18-A

CCP10

8 B76

B77

4A

4B

3)

9 MXU 0

MXU 1

9

11

B105 5E ESA24 0 ESA24 12 B76

B77

4A

4B

10 MXU 0

MXU 1

9

11

B107 5G - - - - - 1)

11 MXU 0

MXU 1

9

11

B108 5H OMU 0 CCP18-A

CCP10

16 B76

B77

4A

4B

3)

12 MXU 0

MXU 1

9

11

B109 5J - - - - - 1)









Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

13 MXU 0 9 B110 5K MXU 1 MX622 –D 9 B121 5V 2)

MXU 1 9

11

B110 5K MXU 0 MX622 –D 9 B121 5V 2)

14 MXU 0

MXU 1

9

11

B111 5L ICSU 6 CCP18-C

CCP18-A

CCP10

17 B76

B77

4A

4B

3)

15 MXU 0

MXU 1

9

11

B112 5M ICSU 19 CCP18-C

CCP18-A

CCP10

18 B76

B77

4A

4B

3)

16 MXU 0

MXU 1

9

11

B113 5N - - - - - 1)

17 MXU 0

MXU 1

9

11

B114 5O - - - - - 1)

18 MXU 0

MXU 1

9

11

B115 5P - - - - - 1)



3) In capacity step 7, that is, RNC196/450 the newest variant must be used.

Table 14. Multiplexer port use for MXU 14 and MXU 15 in RNC196/300 andRNC196/450 (RNAC subrack 2)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 14

MXU 15

9

11

B96 4V SFU 1 SF10 1 B76

B77

4A

4B








Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

1 MXU 14

MXU 15

9

11


B77

4A

4B

2 MXU 14

MXU 15

9

11


B77

4A

4B

3 MXU 14

MXU 15

9

11


AL2S-B

5 B76

B77

4A

4B

3)

4 MXU 14

MXU 15

9

11

B100 4Z - - - - - 1)

5 MXU 14

MXU 15

9

11

B101 5A - - - - - 1)

6 MXU 14

MXU 15

9

11

B102 5B RRMU 1 CCP18-C

CCP18-A

CCP10

7 B76

B77

4A

4B

3)

7 MXU 14

MXU 15

9

11

B103 5C - - - - - 1)

8 MXU 14

MXU 15

9

11

B104 5D RSMU 1 CCP18-C

CCP18-A

CCP10

8 B76

B77

4A

4B

3)

9 MXU 14

MXU 15

9

11

B105 5E GTPU 6 CCP18-C

CCP18-A

CCP10

8 B76

B77

4A

4B

3)

10 MXU 14

MXU 15

9

11

B107 5G - - - - - 1)

11 MXU 14

MXU 15

9

11

B108 5H OMU 1 CCP18-A

CCP10

16 B76

B77

4A

4B

3)

12 MXU 14

MXU 15

9

11

B109 5J - - - - - 1)

13 MXU 15 11 B110 5K MXU 15 MX622 –D 11 B121 5V 2)

MXU 14 9 B110 5K MXU 14 MX622 –D 9 B121 5V 2)









Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

14 MXU 14

MXU 15

9

11

B111 5L ICSU 20 CCP18-C

CCP18-A

CCP10

17 B76

B77

4A

4B

3)

15 MXU 14

MXU 15

9

11

B112 5M ICSU 21 CCP18-A

CCP10

18 B76

B77

4A

4B

3)

16 MXU 14

MXU 15

9

11

B113 5N - - - - - 1)

17 MXU 14

MXU 15

9

11

B114 5O - - - - - 1)

18 MXU 14

MXU 15

9

11

B115 5P - - - - - 1)







Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 2

MXU 3

9

11


B77

4A

4B

1 MXU 2

MXU 3

9

11


B77

4A

4B

2 MXU 2

MXU 3

9

11


B77

4A

4B








Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

3 MXU 2

MXU 3

9

11


AL2S-B

15 B76

B77

4A

4B

2)

4 MXU 2

MXU 3

9

11

B100 4Z - - - - - 1)

5 MXU 2

MXU 3

9

11


B77

4A

4B

6 MXU 2

MXU 3

9

11


B77

4A

4B

7 MXU 2

MXU 3

9

11


B77

4A

4B

8 MXU 2

MXU 3

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 2

MXU 3

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 2

MXU 3

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 2

MXU 3

9

11

B108 5H DMCU 34 CDSP-C 2 B76

B77

4A

4B

12 MXU 2

MXU 3

9

11

B109 5J NIP1 0 NI16P1A 1 B76

B77

4A

4B

13 MXU 2 9 B110 5K MXU 3 MX622 –D 11 B121 5V

MXU 3 11 B110 5K MXU 2 MX622 –D 9 B121 5V

14 MXU 2

MXU 3

9

11


CCP18-A

CCP10

17 B76

B77

4A

4B

2)









Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

15 MXU 2

MXU 3

9

11

B112 5M - - - - - 1)

16 MXU 2

MXU 3

9

11

B113 5N - - - - - 1)

17 MXU 2

MXU 3

9

11

B114 5O - - - - - 1)

18 MXU 2

MXU 3

9

11

B115 5P - - - - - 1)






Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 4

MXU 5

9

11


B77

4A

4B

1 MXU 4

MXU 5

9

11


B77

4A

4B

2 MXU 4

MXU 5

9

11


B77

4A

4B

3 MXU 4

MXU 5

9

11


AL2S-B

15 B76

B77

4A

4B

2)

4 MXU 4

MXU 5

9

11

B100 4Z - - - - - 1)








Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

5 MXU 4

MXU 5

9

11


B77

4A

4B

6 MXU 4

MXU 5

9

11


B77

4A

4B

7 MXU 4

MXU 5

9

11


B77

4A

4B

8 MXU 4

MXU 5

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 4

MXU 5

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 4

MXU 5

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 4

MXU 5

9

11


B77

4A

4B

12 MXU 4

MXU 5

9

11

B109 5J - - - - - 1)

13 MXU 4 9 B110 5K MXU 5 MX622 –D 11 B121 5V

MXU 5 11 B110 5K MXU 4 MX622 –D 9 B121 5V

14 MXU 4

MXU 5

9

11


CCP18-A

CCP10

17 B76

B77

4A

4B

2)

15 MXU 4

MXU 5

9

11

B112 5M - - - - - 1)

16 MXU 4

MXU 5

9

11

B113 5N - - - - - 1)

17 MXU 4

MXU 5

9

11

B114 5O - - - - - 1)









Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

18 MXU 4

MXU 5

9

11

B115 5P - - - - - 1)




RNC196/450 (RNBC subrack 1)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW 0 MXU 6

MXU 7

9

11


B77

4A

4B

1 MXU 6

MXU 7

9

11


B77

4A

4B

2 MXU 6

MXU 7

9

11


B77

4A

4B

3 MXU 6

MXU 7

9

11


AL2S-B

15 B76

B77

4A

4B

2)

4 MXU 6

MXU 7

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

2)

5 MXU 6

MXU 7

9

11


B77

4A

4B

6 MXU 6

MXU 7

9

11


B77

4A

4B

7 MXU 6

MXU 7

9

11


B77

4A

4B






RNC196/450 (RNBC subrack 1) (cont.)


Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

8 MXU 6

MXU 7

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 6

MXU 7

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 6

MXU 7

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 6

MXU 7

9

11


B77

4A

4B

12 MXU 6

MXU 7

9

11

B109 5J - - - - - 1)

13 MXU 6 9 B110 5K MXU 7 MX622 –D 11 B121 5V

MXU 7 11 B110 5K MXU 6 MX622 –D 9 B121 5V

14 MXU 6

MXU 7

9

11

B111 5L - - - - - 1)

15 MXU 6

MXU 7

9

11

B112 5M - - - - - 1)

16 MXU 6

MXU 7

9

11

B113 5N - - - - - 1)

17 MXU 6

MXU 7

9

11

B114 5O - - - - - 1)

18 MXU 6

MXU 7

9

11

B115 5P - - - - - 1)











Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 8

MXU 9

9

11


B77

4A

4B

1 MXU 8

MXU 9

9

11


B77

4A

4B

2 MXU 8

MXU 9

9

11

B98 4X GTPU 7 CCP18-C

CCP18-A

CCP10

14 B76

B77

4A

4B

2)

3 MXU 8

MXU 9

9

11


AL2S-B

15 B76

B77

4A

4B

2)

4 MXU 8

MXU 9

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

2)

5 MXU 8

MXU 9

9

11


B77

4A

4B

6 MXU 8

MXU 9

9

11


B77

4A

4B

7 MXU 8

MXU 9

9

11


B77

4A

4B

8 MXU 8

MXU 9

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 8

MXU 9

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 8

MXU 9

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 8

MXU 9

9

11

B108 5H - - - - - 1)








Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

12 MXU 8

MXU 9

9

11

B109 5J - - - - - 1)

13 MXU 8 9 B110 5K MXU 9 MX622 –D 11 B121 5V

MXU 9 11 B110 5K MXU 8 MX622 –D 9 B121 5V

14 MXU 8

MXU 9

9

11

B111 5L - - - - - 1)

15 MXU 8

MXU 9

9

11

B112 5M - - - - - 1)

16 MXU 8

MXU 9

9

11

B113 5N - - - - - 1)

17 MXU 8

MXU 9

9

11

B114 5O - - - - - 1)

18 MXU 8

MXU 9

9

11

B115 5P - - - - - 1)






Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

0 MXU 10

MXU 11

9

11


B77

4A

4B

1 MXU 10

MXU 11

9

11


B77

4A

4B









Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

2 MXU 10

MXU 11

9

11


B77

4A

4B

3 MXU 10

MXU 11

9

11


AL2S-B

15 B76

B77

4A

4B

2)

4 MXU 10

MXU 11

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

2)

5 MXU 10

MXU 11

9

11


B77

4A

4B

6 MXU 10

MXU 11

9

11


B77

4A

4B

7 MXU 10

MXU 11

9

11


B77

4A

4B

8 MXU 10

MXU 11

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 10

MXU 11

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 10

MXU 11

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 10

MXU 11

9

11


B77

4A

4B

12 MXU 10

MXU 11

9

11

B109 5J - - 1 B76

B77

4A

4B

13 MXU 10 9 B110 5K MXU 11 MX622 –D 11 B121 5V

MXU 11 11 B110 5K MXU 10 MX622 –D 9 B121 5V








Port

no.

No. Slot Cabling

position

Tributary

unit

Plug-in

unit

Slot Cabling

position

SW HW SW HW

14 MXU 10

MXU 11

9

11

B111 5L - - - - - 1)

15 MXU 10

MXU 11

9

11

B112 5M - - - - - 1)

16 MXU 10

MXU 11

9

11

B113 5N - - - - - 1)

17 MXU 10

MXU 11

9

11

B114 5O - - - - - 1)

18 MXU 10

MXU 11

9

11

B115 5P - - - - - 1)






Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

0 MXU 12

MXU 13

9

11


B77

4A

4B

1 MXU 12

MXU 13

9

11


B77

4A

4B

2 MXU 12

MXU 13

9

11


B77

4A

4B

3 MXU 12

MXU 13

9

11


AL2S-B

15 B76

B77

4A

4B

2)









Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

4 MXU 12

MXU 13

9

11


CCP18-A

CCP10

16 B76

B77

4A

4B

2)

5 MXU 12

MXU 13

9

11


B77

4A

4B

6 MXU 12

MXU 13

9

11


B77

4A

4B

7 MXU 12

MXU 13

9

11


B77

4A

4B

8 MXU 12

MXU 13

9

11


CCP18-A

CCP10

5 B76

B77

4A

4B

2)

9 MXU 12

MXU 13

9

11


CCP18-A

CCP10

4 B76

B77

4A

4B

2)

10 MXU 12

MXU 13

9

11


CCP18-A

CCP10

3 B76

B77

4A

4B

2)

11 MXU 12

MXU 13

9

11


B77

4A

4B

12 MXU 12

MXU 13

9

11

B109 5J - - - - - 1)

13 MXU 12 9 B110 5K MXU 13 MX622 –D 11 B121 5V

MXU 13 11 B110 5K MXU 12 MX622 –D 9 B121 5V

14 MXU 12

MXU 13

9

11

B111 5L - - - - - 1)

15 MXU 12

MXU 13

9

11

B112 5M - - - - - 1)








Port

no.

No. Slot Cabling

position


unit

Slot Cabling

position

SW HW SW HW

16 MXU 12

MXU 13

9

11

B113 5N - - - - - 1)

17 MXU 12

MXU 13

9

11

B114 5O - - - - - 1)

18 MXU 12

MXU 13

9

11

B115 5P - - - - - 1)








Table 21. LAN port use of ESA24 (RNAC, with ESA24 0 in subrack 1 and

ESA24 1 in subrack 2) (cont.)

ESA24 0

(ESA24 1)

LAN using the port Note

Port

no.

No. Slot Cabling

position

FU Plug-in unit Slot Cabling

position

SW HW SW HW

1) Cabling to external network via CPLAN-A.

2) Must be used with capacity steps 6 and 7.



ATM Links LAN Conn RNC196 Dn04128136 3-0 En

Documents

Transcript of ATM Links LAN Conn RNC196 Dn04128136 3-0 En