ATF110G-5 - · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical...

28
ATF110G-5 130 Ton Capacity (118.0 Metric Tons) ALL TERRAIN CRANE DIMENSIONS TURNING RADIUS Steering Carrier inside Over carrier Over boom Over boom extension Specifications are subject to change without notice. Front wheel (10x4) 19' 8-1/4" (6.0m) 38' 3-5/8" (11.675m) 41' 4-1/16" (12.6m) 43' 7-5/8" (13.3m) All wheel (10x8) 16' 4-7/8" (5.0m) 34' 1-7/16" (10.4m) 37' 8-3/4" (11.5m) 39' 7-3/8" (12.075m) 48'10-15/16"(14907.5) 39'6-3/8"(12049) 7'8-1/2"(2350) 8'3-11/16"(2536) 15'4-1/4"(4680) 16'3/8"(4886) 8'4-3/4"(2560) 5'4-15/16"(1650) 5'11-4/16"(1810) 5'7-11/16"(1791.9) 5'6-15/16"(1700) 25'4-15/16"(7745) 42'5-3/16"(12950) 13'3-7/8"(4061.5) 7'10-1/2"(2400) 15'9-1/8"(4803) 2-6/16"(60) 13'1-5/16"(3995) 9'11-1/16"(3024) 21.6° 21.5° 7'11-1/2"(2426):20.5R25 7'6-15/16"(2310):16.00R25 9'1/4"(2750):16.00R25 9'8-15/16"(2970):20.5R25 10'11/16"(3065) 10'3-1/16"(3125) 32'10-9/16"(10021.5) Max.24'7-1/4"(7500) Mid.16'4-7/8"(5000)

Transcript of ATF110G-5 - · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical...

Page 1: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

ATF110G-5130 Ton Capacity (118.0 Metric Tons)

ALL TERRAIN CRANE

DIMENSIONS

TURNING RADIUS Steering

Carrier insideOver carrierOver boomOver boom extension

Specifications are subject to change without notice.

Front wheel (10x4)

19' 8-1/4" (6.0m)38' 3-5/8" (11.675m)41' 4-1/16" (12.6m)43' 7-5/8" (13.3m)

All wheel (10x8)

16' 4-7/8" (5.0m)34' 1-7/16" (10.4m)37' 8-3/4" (11.5m)39' 7-3/8" (12.075m)

48'10-15/16"(14907.5)

39'6-3/8"(12049)

7'8-1/2"(2350) 8'3-11/16"(2536)

15'4-1/4"(4680)16'3/8"(4886)

8'4-3/4"(2560) 5'4-15/16"(1650) 5'11-4/16"(1810) 5'7-11/16"(1791.9)5'6-15/16"(1700)

25'4-15/16"(7745)

42'5-3/16"(12950)13'3-7/8"(4061.5)

7'10-1/2"(2400)

15'9-1/8"(4803)

2-6/16"(60)

13'1

-5/1

6"(3

995)

9'11

-1/1

6"(3

024)

21.6

°

21.5°

7'11-1/2"(2426):20.5R257'6-15/16"(2310):16.00R25

9'1/4"(2750):16.00R259'8-15/16"(2970):20.5R25

10'11/16"(3065)

10'3-1/16"(3125)

32'10-9/16"(10021.5)

Max.24'7-1/4"(7500)Mid.16'4-7/8"(5000)

Page 2: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

1. CRANE CARRIER1.1 FRAME 1.9 BRAKE SYSTEMFAUN purpose built, 5 axle, box-type, torsion resistant, Service brake : Dual circuit compressed air system welded construction made of high tensile steel with with air-dryer. ABS(OPTIONAL)integrated outrigger housings. Equipped with front and rear Parking brake : Spring loaded type, acting on 2nd,4th and fenders, front and rear towing and tie-down lugs and 5th axles. 2 access steps.Centralized lubrication system. Auxiliary brake : Interder,engine exhaust brake and

constant throttle engine brake system. 1.2 OUTRIGGERSFour point, fully hydraulic, double telescopic outriggers with 1.10 WHEELS AND TIREShorizontal and vertical motions are independently controlled (10)11.00-25 steel disc wheels with (10)16.00R25 by electro-magnetic valves. Push button controls with level on / off-road profile tires and mud flaps.gauges on both sides of carrier and in super-structure cab. Carrier width: 9'1/4" (2.75m) with16.00R25 tiresVertical cylinders with integral holding valves. Large sized floats can be stored on vertical cylinders or on carrier for road travel. Outrigger base: length 24'7-1/4" (7.5m), width 25' 4-3/4"(7.74m) 1.11 STEERING SYSTEM

Mid. extension 16' 4-7/8" (5.0m). ZF semi block dual circuit hydraulic steering, Mechanical Outrigger floats: 1'9-5/16"(542mm) x 1'9-5/16"(542mm) steering of two front axles with hydraulic booster and a

emergency steering pump is flange-mounted to the 1.3 CARRIER ENGINE trasfer box.Mercedes Benz 8 cylinder water-cooled diesel engine, Rear axles can also be steered electronically depends onmodel OM 502 LA (EUROMOT2,EPA), with hydrostatically the speed according to the seering angle of the front axles.driven fan and thermostatically controlled cooler. Rear axles are locked in "centered" position automatically.Displacement 971.98 in3, Rating 517 hp at 1,800 rpm:Torque 1,770 ft-lbs at I ,200 rpm. 1.12 POWER TRAIN

Drive-shafts with cross-geared flanges virtually 1.4 TRANSMISSION maintenance-free. ZF AS-Tronic, type 16AS2602, with integrated intarder. Electro-pneumatically controlled dry clutch and fully automatic 1.13 FUEL TANK CAPACITYcontorl system, 16 forward speeds and 2 reverse gears. 132 gal (500 l) filler cap lockable. Gear ratios: Forward: 14.12 / 11.68 / 9.54 / 7.89 / 6.52 / 5.39 / 4.57

3.78 / 3.09 / 2.56 / 2.09 / 1.73 / 1.43 / 1.18 / 1.00 / 0.83 1.14 CARRIER CABReverse: 13.07 / 10.81 Two man full width cab of composite structure (steel sheet

metal and fiber glass), windshield of laminated safety glass 1.5 TRANSFER CASE with windshield wiper and washer, sliding side windows of Two-step transfer box, type VG3750, with on/off road drive. tempered glass. Driver and co-driver seats adjustable Gear ratios: On-road: 0.8 and air-suspended with integrated 3 point safety belts and

Off-road: 1.836 headrests. 2 rear-view mirrors (electrically adjustable), 1 wide angle mirror and additional curb mirror, all mirrors

1.6 DRIVE heated, Radio with CD player and connections for wireless. 10×6 : 2nd, 4th and 5th axle are driven Engine dependent warm-water heater with defroster 10×8 (OPTIONAL) : 1st, 2nd, 4th and 5th axle are driven nozzles for windshield and cab floor.

Cruise control function. Single-key system.1.7 AXLES Instrumentation includes speedometer, odometer, 1st axle : steered, non driven (10x6) tachograph, rpm counter with hour meter, fuel level gauge,

steered, driven (10x8) warning light fro the engine temperature, gearbox display,2nd axle : steered, driven with transverse differential lock, colour display indicating further warning signals and

reduction : 8.47 operating functions and the compressed air system.3rd axle : non steered, non driven, lift axle Air conditioner(OPTIONAL)4th axle : steered, driven with longlitudinal differential lock and

transverse differential lock, 1.15 ELECTRICAL SYSTEMreduction : 8.47 24 volt DC system with 100 ampere 3-phase generator, and

5th axle : steered, driven with transverse differential lock, two 12 volt, 170 Ah batteries. reduction : 8.47 Front lighting includes 2 main head lights, 2 high beam

All steering knuckle bearings designed for minimum lights, 2 directional indicators and 2 parking lights.maintenance (yearly inspection). Rear lighting includes 2 rear combi panels each with

directional indicator, parking light, brake light, fog light, 1.8 SUSPENSION reversing light and license plate light. Hydro-pneumatic, lockable with level adjustment. All axles Side lighting includes 2 front directional indicators and have longitudinal and transverse trailing arms. With reflectors on carrier. leveling adjustment and locked cylinders, the chassis can Other equipment includes hazard warning light system, be tilted laterally and longitudinally by push buttons in the cab light, instrument panel light, signal horn and amber carrier cab, or from the contorl panel of the outrigger which adjust rotating beacon on cab roof. the stroke of each individualsuspension cylinder. Charging plugbox. Back up alarm. 2 front fog lights.

4 lights to illuminate the area of the extended outriggers.Cylinder stroke: - 4-5/8" (- 118mm) Lighting according to EEC regulations.

+6-1/4" (+ 158mm)

2

Page 3: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

1.16 TOOLS AND ACCESSORIES 1.19 CARRIER OPTIONAL EQUIPMENTSpecial tool set, hazard warning triangle, hazard falshing lamp, 1. Air conditioningfire extinguisher and first aid kit. 2. 20.5R25 on/off road profile tires

3. Spare wheel & tire1.17 PAINTING 4. 10x8(1st, 2nd, 4th, 5th axles driven)Standard TADANO colors 5. ABS

6. Eddy current brake (retarder) 1.18 DIMENSIONS 7. Rear view camara(image displayed in carrier cab)Overall width : 9'1/4" (2.75m) with16.00R25 tires 8. Spark arrester

9'10-1/8" (3.0m) with 20.5R25 tires (OPTIONAL) 9. Toolbox rearOverall height : 12'11-1/2" (3.95m) 10. Towing attachment(D-Value 190 kN)

In travel condition, the overall height can 11. Pneumatic and electrical quick disconnect be adjusted - 4-5/8" / + 6-1/4" connectors mounted on rear bumper for boom dolly

Overall length : 49' 7/16" (14.946m)51' 4-1/8" (15.649m) with Aux. winch

Carrier length : 39'6-7/16" (12.05m)Wheel base : 8' 4-13/16" + 5' 4-15/16" + 5'11-1/4" + 5' 6-15/16"

(2.56m + 1.65m + 1.81m + 1.7m )

2. TRAVEL PERFORMANCE (according to DIN 70020)Max. travel speed : 52.8 mphMax. gradeability : 61 %

The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction. A minimum speed of 0.6 MPH is in 1st gear(off-road) at 800 rpm.

2520

4

976

161411

365543

32

2 145

1.93.7

8.710.612.4

1.952.8

23.628.6

19.3

4.3

5

3.74.35.06.27.59.3

11.213.0

4.35.0

6th

5.67th

2nd3rd

2.53.1

4th5th

2nd Rev.

8th9th

10th11th12th

1st Rev.

13th14th15th

Gear

1stOn -road gear

31

4739

Off-road gear On -road gear1.91.9

16.00R25 / 20.5R25 tires, GVW 132,275 lb

Off-road gear6147

Travelling speed (mph) Gradabilities (%)

19.6 42.3

2.5 373024191613118

16.2

26.1

33

6.8

7

16th

14.9 34.8 4

21.7 49.7 3

3

Page 4: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

3. SUPERSTRUCTURE3.10 AUXILIARY WINCH (OPTIONAL)

3.1 SUPERSTRUCTURE FRAME Axial piston constant displacement motor, grooved hoist Connected to carrier by a single-race ball bearing slewing drum, integral planetary gear, automatic hydraulically ring with external gearing providing 360°continuous rotation. controlled spring-loaded multiple disc brake and Central lubrication system for slewing device, boom elevation cylinder integral free wheeling (no sagging of load by hoisting). and basic bearing. Winch drive assembly connected to open hydraulic

system. Wire rope with "Superstop" easy reeving system. 3. 2 CRANE ENGINE Lower limit switch and drum turn indicator. Mercedes Benz 4 cylinder water-cooled diesel engine, Drum diameter : 20.67" (525mm)model OM 904 LA(EUROMOT 2,EPA), with 177 hp at 2,200 rpm, Rope diameter : 0.83" (21mm)486.80 ft-lbs torque at 1,200 - 1,600 rpm. Stepless control of engine Rope length : 820' (250m)rpm by foot pedal. Max. Iine pull 3rd layer : 21,356 lbs. (95 kN)Fuel tank capacity : 84.53 gal (320 l) Max. line speed 4th layer : 426.5 ft/min (130m/min)

3. 3 HYDRAULIC SYSTEM 3.11 SLEWING GEAR Three circuit diesel hydraulic system with 1 axial piston Constant displacement motor with three stage planetary gear,variable displacement (hydraulically controlled) double pump a foot actuated or automatic service brake and a parking brake. with cumulative control for telescoping, derricking Open hydraulic circuit with free slewing function.and hoisting plus I axial piston pump for swing and pilot controls. Slewing speed infinitely variable: 0 - 1.7 rpm

3.4 HYDRAULIC CONTROLS 3.12 COUNTERWEIGHT 2 joy-stick levers and 4 three-way electrically operated Total 77,160 lbs, divisible, assembled and disassembled valves for independent simultaneous operation of all crane by hydraulic cylinders controlled from crane cab. motions with stepless speed control. Tail swing : 13' 5-7/16" (4.10m)

3.5 TELESCOPIC BOOM 3.13 SUPERSTRUCTURE CAB Five section box type construction of high tensile, fine grained steel, Spacious comfortable panoramic cab with sliding door, consisting of 1 base section and 4 telescopic sections. The extra-large tinted glass windows, electrical fold-out front boom is extended by means of I double acting single stage cylinders window with windshield washer and wiper, fixed cab roof with integrated holding valves. window with armoured glass and washer/wiper, sun visor, All telescope sections can be extended and retracted fully automatic cab light, tiltable cockpit with adjustable hydraulically cushioned and locked in the selected working position. seat with headrest, signal horn, radio with CD player, and All telescope sections are extendable under partial load. connection for wireless (12 volt). Total retracted length : 42' 5-13/16" (12.95m) Engine dependent hot-water heater and engine independent Total extended length : 170' 7-1/4" (52.0m) hot water heater with engine pre-heat.Max. sheave height : 180' 5-3/8" (55.0m) Complete controls and instrumentation plus LCD graphic displayTelescoping speed out : 320 sec. for crane operation.

Outrigger controls from superstructure cab and supported forces3.6 BOOM EXTENSION display.(OPTIONAL)Swing around lattice type boom extension 31.17'(9.5m) / 53.15'(16.2m), Air conditioner.(OPTIONAL)offsets 0°/ 20°/ 35°with anti-two block system.24.6'(7.5m) top jib to extended to 79.07'(24.1m). 3.14 ELECTRICAL SYSTEM 19.7'(6.0m) intermediate section to extend to 98.75'(30.1m). 24 volt system with 30 A 3-phase alternator, two 12 V (110 Ah)

batteries, 1 rotating beacon on left-hand side of main 3.7 AUXILIARY LIFTING SHEAVE (SINGLE TOP) (OPTIONAL) winch, 2 working lights on cab front flap, 1 working light on Single sheave mounted to main boom head for single line boom base section and 2 side lights on boom head. operation (stowable). Equipped with anti-two block system .

3.15 SAFETY DEVICES 3.8 BOOM HOIST Electronic load moment device (ASLI) with interpolation1 double acting hydraulic cylinder with integral holding valve. and automatic overload shut-off, hoist limit switch with shut-off,Boom elevation : -2° to +82° overload warning and load moment gauge. Anemometer.Boom elevation speed : 84 sec. normal speed / Digital display of boom angle, boom length, sheave height,

42 sec. high speed (only derricking up) working radius, hook load and further information. Working area limitaion for lifting height, load radius, boom angle

3.9 MAIN WINCH and swing range. Axial piston constant displacement motor, grooved hoist Safety valves against pipe and hose rupture, holding drum, integral planetary gear, automatic hydraulically valves on hydraulic cylinders. controlled spring-loaded multiple disc brake and integral free wheeling (no sagging of load by hoisting). 3.16 SUPERSTRUCTURE OPTIONAL EQUIPMENT Winch drive assembly connected to open hydraulic 1. Air conditioningsystem. Wire rope with "Superstop" easy reeving system. 2. 11 ton headache ballLower limit switch and drum turn indicator. 3. 27.5 ton, 1 sheave single hook blockDrum diameter : 20.67" (525mm) 4. 69.4 ton, 3 sheave ram's horn hook blockRope diameter : 0.83" (21mm) 5. 88.0 ton, 5 sheave ram's horn hook blockRope length : 820' (250m) 6. 138.0 ton, 7 sheave ram's horn hook blockMax. Iine pull 1st layer : 21,356 lbs. (95 kN) 7. Auxiliary winchMax. line speed 4th layer : 426.5 ft/min (130m/min) 8. Auxiliary lifting sheave

9. 24.6' top jib for boom extension10. 19.7' intermediate section for boom extension11. 11.48' Heavy-lift jib12. Spark arrester13. Aircraft warning lamp14. Drive/steer and outrigger control from crane cab15. Outrigger load monitors with display

in superstructure cab and outrigger control panels.16. Addtitional hydraulic oil cooler17. Working area limitation(Slew limit)18. Free slewing and free boom elevation circuits for

boom dolly. 19. 360o positive swing lock (NYC requirement).

4

Page 5: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

ATF110G-5 WORKING RANGE CHART

Load radius from Axis of Rotation in Feet

NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firmsupporting surface. Boom deflection and subsequent radius and boom angle change must beaccounted for when applying load to hook.

5

Lifting H

eig

ht in

Feet

Page 6: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

ATF110G-5 TADANO-Load rating chart Counterweight 77,160 lbs

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Work. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 260.0* 228.0* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 234.0* 206.0 73 192.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 215.0 187.5 71 183.5 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 193.5 171.5 68 170.0 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 173.0 158.5 67 157.0 67 114.0 67 101.5 72 131.5 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 154.5 146.0 65 144.5 65 114.0 65 98.2 71 122.5 71 114.0 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 122.5 121.5 59 120.0 59 114.0 59 87.9 66 106.5 66 114.0 66 98.4 66 61.4 71 95.0 71 102.0 71 97.0 71 67.5 2530 30 100.5 100.5 52 98.5 52 102.0 52 78.5 62 92.8 62 102.0 62 90.4 62 54.0 68 82.7 68 95.4 68 92.1 68 61.3 3035 45 82.9 45 85.5 45 70.8 57 80.7 57 86.2 57 81.3 57 47.8 64 73.1 64 85.1 64 86.4 64 55.1 3540 37 70.4 37 73.7 37 64.4 51 69.1 51 73.7 51 72.1 51 42.9 60 65.6 60 72.7 60 75.5 60 49.2 4045 25 57.1 25 60.3 25 59.7 46 56.0 46 60.6 46 62.1 46 38.9 56 56.2 56 59.7 56 62.6 56 44.3 4550 39 47.0 39 51.6 39 53.5 39 35.5 51 47.9 51 50.6 51 53.4 51 40.4 5055 32 40.0 32 44.5 32 46.4 32 32.8 47 40.9 47 43.4 47 46.1 47 37.1 5560 23 34.2 23 38.3 23 40.3 23 30.4 42 35.3 42 37.5 42 40.4 42 34.2 6065 36 30.8 36 33.0 36 35.8 36 31.8 6570 29 27.0 29 29.3 29 32.0 29 29.8 7075 22 23.3 22 25.8 22 28.3 22 27.7 7580 8085 8590 9095 95

100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 260.0* 228.0* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 234.0* 205.5 73 192.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 211.5 187.0 71 183.0 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 187.0 171.0 68 169.5 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 167.0 158.0 67 156.5 67 114.0 67 101.5 72 131.5 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 149.0 145.5 65 144.0 65 114.0 65 98.2 71 122.5 71 114.0 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 118.0 118.0 59 116.0 59 113.5 59 87.9 66 106.5 66 113.5 66 98.4 66 61.4 71 95.0 71 102.0 71 97.0 71 67.5 2530 30 96.7 96.7 52 95.0 52 98.3 52 78.5 62 92.8 62 98.3 62 90.4 62 54.0 68 82.7 68 94.9 68 92.1 68 61.3 3035 45 76.6 45 80.2 45 70.8 57 75.5 57 80.4 57 81.3 57 47.8 64 73.1 64 79.2 64 81.8 64 55.1 3540 37 61.5 37 65.2 37 63.9 51 60.4 51 65.7 51 67.8 51 42.9 60 61.5 60 64.4 60 67.6 60 49.2 4045 25 51.1 25 54.5 25 55.2 46 50.0 46 54.9 46 56.9 46 38.9 56 50.9 56 53.8 56 56.7 56 44.3 4550 39 42.0 39 46.6 39 48.7 39 35.5 51 42.9 51 45.7 51 48.5 51 40.4 5055 32 35.6 32 40.1 32 42.1 32 32.8 47 36.5 47 39.1 47 41.9 47 37.1 5560 23 30.0 23 34.7 23 36.4 23 30.4 42 31.2 42 33.8 42 36.4 42 34.2 6065 36 27.0 36 29.6 36 32.1 36 31.8 6570 29 23.7 29 26.2 29 28.7 29 29.2 7075 22 20.5 22 22.8 22 25.5 22 26.5 7580 8085 8590 9095 95

100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

6

Page 7: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 77,160 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 84.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 77.4 72 82.1 72 61.3 72 51.3 75 64.9 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 70.2 69 78.2 69 58.3 69 46.7 72 60.8 72 57.2 72 44.8 74 52.0 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 63.1 66 73.4 66 54.9 66 42.4 69 56.8 69 55.3 69 42.7 72 49.4 72 43.2 72 42.3 75 43.4 75 38.7 76 34.0 77 28.0 4045 62 56.2 62 61.1 62 51.7 62 38.1 66 52.6 66 53.1 66 40.5 70 46.4 70 41.7 70 40.7 72 41.4 72 38.0 74 34.0 75 28.0 4550 59 49.0 59 52.3 59 47.7 59 34.7 64 47.8 64 51.0 64 38.3 68 43.5 68 40.2 68 38.8 71 39.5 71 37.2 73 34.0 74 28.0 5055 55 42.4 55 45.2 55 44.0 55 31.7 60 42.6 60 46.8 60 36.2 65 40.7 65 38.9 65 37.0 69 37.7 69 36.5 71 33.7 72 27.5 5560 51 36.6 51 39.3 51 40.5 51 29.1 57 37.1 57 40.6 57 33.9 63 37.5 63 37.5 63 35.0 67 35.6 67 35.6 70 33.1 71 26.5 6065 47 32.1 47 34.7 47 36.8 47 26.9 54 32.5 54 35.9 54 31.4 60 33.2 60 35.1 60 32.1 64 33.0 64 34.1 67 32.1 69 25.3 6570 43 28.4 43 30.9 43 33.1 43 25.1 51 28.7 51 32.0 51 29.3 57 29.5 57 32.3 57 29.8 62 30.1 62 31.9 66 30.2 67 24.4 7075 38 25.2 38 27.7 38 29.8 38 23.3 48 25.5 48 28.8 48 27.4 54 26.4 54 29.3 54 27.7 60 27.4 60 29.3 64 28.0 65 23.5 7580 33 22.3 33 24.9 33 27.0 33 21.7 44 22.7 44 26.0 44 25.5 51 23.7 51 26.3 51 25.7 57 24.7 57 26.5 61 25.6 63 22.5 8085 26 19.8 26 22.4 26 24.6 26 20.4 40 20.2 40 23.5 40 23.7 48 21.3 48 24.0 48 23.7 55 22.2 55 24.0 59 23.1 61 21.4 8590 17 17.7 17 20.4 17 22.4 17 19.2 36 18.0 36 21.6 36 22.3 45 19.1 45 22.1 45 22.2 52 20.2 52 21.9 57 21.0 60 20.4 9095 31 16.1 31 19.8 31 20.9 42 17.1 42 20.2 42 20.6 49 18.2 49 20.0 55 19.1 58 19.0 95100 25 14.5 25 18.0 25 19.4 38 15.4 38 18.5 38 18.9 46 16.5 46 18.3 52 17.4 55 17.4 100110 29 12.5 29 15.6 29 16.1 40 13.5 40 15.4 47 14.5 51 14.6 110120 17 9.9 17 13.2 17 13.7 32 11.2 32 13.1 41 12.0 46 12.2 120130 22 9.2 22 10.9 35 10.0 41 10.2 130140 26 8.4 34 8.4 140150 13 7.0 26 7.0 150160 15 5.9 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Counterweight 63,490 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 84.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 77.4 72 82.1 72 61.3 72 51.3 75 64.9 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 70.2 69 78.2 69 58.3 69 46.7 72 60.8 72 57.2 72 44.8 74 52.0 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 62.6 66 66.3 66 54.9 66 42.4 69 56.8 69 55.3 69 42.7 72 49.4 72 43.2 72 42.3 75 43.4 75 38.7 76 34.0 77 28.0 4045 62 52.4 62 55.4 62 51.7 62 38.1 66 51.3 66 53.1 66 40.5 70 46.4 70 41.7 70 40.7 72 41.4 72 38.0 74 34.0 75 28.0 4550 59 44.5 59 47.3 59 47.7 59 34.7 64 44.5 64 47.9 64 38.3 68 42.8 68 40.2 68 38.8 71 39.5 71 37.2 73 34.0 74 28.0 5055 55 38.0 55 40.9 55 42.9 55 31.7 60 38.3 60 42.1 60 36.2 65 38.6 65 38.4 65 37.0 69 37.2 69 36.5 71 33.7 72 27.5 5560 51 32.7 51 35.6 51 37.8 51 29.1 57 33.2 57 36.7 57 33.9 63 34.0 63 36.0 63 35.0 67 34.4 67 35.6 70 33.1 71 26.5 6065 47 28.5 47 31.2 47 33.4 47 26.9 54 29.0 54 32.3 54 31.4 60 29.8 60 32.6 60 32.1 64 30.9 64 32.3 67 31.5 69 25.3 6570 43 25.1 43 27.7 43 30.1 43 25.1 51 25.5 51 28.9 51 28.7 57 26.4 57 29.4 57 29.4 62 27.5 62 29.2 66 28.4 67 24.4 7075 38 22.1 38 24.7 38 27.0 38 23.3 48 22.4 48 25.9 48 26.6 54 23.4 54 26.4 54 26.7 60 24.4 60 26.2 64 25.3 65 23.5 7580 33 19.5 33 22.2 33 24.3 33 21.7 44 19.7 44 23.3 44 24.8 51 20.8 51 23.7 51 24.1 57 21.7 57 23.5 61 22.6 63 22.1 8085 26 17.1 26 20.0 26 22.0 26 20.4 40 17.5 40 21.1 40 22.4 48 18.4 48 21.5 48 21.7 55 19.5 55 21.3 59 20.4 61 20.6 8590 17 15.1 17 17.9 17 20.1 17 19.2 36 15.5 36 19.0 36 20.5 45 16.6 45 19.5 45 19.9 52 17.7 52 19.4 57 18.5 60 18.6 9095 31 13.7 31 17.3 31 18.8 42 14.8 42 17.8 42 18.2 49 15.8 49 17.7 55 16.7 58 16.9 95100 25 12.1 25 15.8 25 17.2 38 13.2 38 16.3 38 16.7 46 14.1 46 16.1 52 15.0 55 15.4 100110 29 10.3 29 13.4 29 14.0 40 11.6 40 13.4 47 12.5 51 12.5 110120 17 8.2 17 11.3 17 11.7 32 9.3 32 11.1 41 10.2 46 10.2 120130 22 7.4 22 9.2 35 8.2 41 8.4 130140 26 6.8 34 6.8 140150 13 5.4 26 5.4 150160 15 4.4 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 24.61 ft

Boom length (ft)

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 24.61 ft

Boom length (ft)

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine

7

Page 8: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 260.0* 228.0* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 231.5* 199.0 73 191.5 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 201.5 181.0 71 179..5 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 176.5 165.5 68 164.0 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 157.5 152.5 67 151.0 67 114.0 67 101.5 72 131.5 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 140.5 140.5 65 138.5 65 114.0 65 98.2 71 122.5 71 114.0 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 111.0 111.0 59 109.5 59 109.5 59 87.9 66 106.5 66 109.6 66 98.4 66 61.4 71 95.0 71 102.0 71 97.0 71 67.5 2530 30 85.2 85.2 52 83.3 52 87.4 52 78.5 62 81.8 62 87.9 62 89.4 62 54.0 68 82.0 68 86.6 68 90.5 68 61.3 3035 45 64.3 45 68.1 45 68.3 57 63.0 57 68.2 57 70.7 57 47.8 64 64.1 64 67.2 64 70.6 64 55.1 3540 37 51.7 37 55.3 37 56.4 51 50.4 51 55.5 51 57.9 51 42.9 60 51.5 60 54.4 60 57.7 60 49.2 4045 25 42.5 25 45.8 25 46.9 46 41.4 46 46.1 46 48.3 46 38.9 56 42.5 56 45.0 56 48.1 56 44.3 4550 39 34.5 39 39.1 39 41.0 39 35.5 51 35.5 51 38.0 51 40.8 51 40.4 5055 32 28.9 32 33.5 32 35.3 32 32.8 47 29.8 47 32.4 47 35.0 47 36.4 5560 23 24.2 23 28.6 23 30.4 23 30.4 42 25.3 42 27.7 42 30.4 42 32.1 6065 36 21.6 36 24.0 36 26.9 36 28.3 6570 29 18.5 29 21.1 29 23.8 29 25.3 7075 22 15.5 22 18.2 22 20.8 22 22.4 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.

Counterweight 24,250 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 260.0* 228.0* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 217.0* 198.0 73 191.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 187.0 179.5 71 178.5 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 163.5 162.5 68 160.5 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 146.0 146.0 67 144.0 67 114.0 67 101.5 72 131.5 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 130.0 130.0 65 128.0 65 114.0 65 98.2 71 122.5 71 114.0 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 95.3 95.3 59 93.2 59 97.4 59 87.9 66 91.8 66 97.7 66 94.5 66 61.4 71 89.7 71 93.3 71 93.6 71 67.5 2530 30 67.3 67.3 52 65.2 52 69.4 52 70.7 62 63.9 62 70.0 62 72.4 62 54.0 68 65.1 68 68.5 68 72.1 68 61.3 3035 45 49.8 45 53.6 45 54.8 57 48.6 57 53.9 57 56.3 57 47.8 64 49.7 64 52.8 64 56.1 64 55.1 3540 37 39.6 37 43.1 37 44.2 51 38.3 51 43.3 51 45.7 51 42.9 60 39.4 60 42.3 60 45.5 60 46.9 4045 25 31.9 25 35.2 25 36.5 46 30.5 46 35.6 46 37.8 46 37.8 56 31.6 56 34.7 56 37.6 56 39.3 4550 39 24.6 39 29.5 39 31.7 39 32.2 51 25.8 51 28.5 51 31.6 51 33.4 5055 32 19.8 32 24.7 32 26.8 32 27.2 47 21.0 47 23.6 47 26.8 47 28.5 5560 23 15.8 23 20.6 23 22.6 23 23.0 42 16.8 42 19.7 42 22.8 42 24.3 6065 36 13.8 36 16.7 36 19.6 36 21.1 6570 29 11.2 29 14.0 29 17.1 29 18.7 7075 22 8.7 22 11.3 22 14.8 22 16.3 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

8

Page 9: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 84.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 77.4 72 81.6 72 61.3 72 51.3 75 64.9 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 66.0 69 69.1 69 58.3 69 46.7 72 60.8 72 57.2 72 44.8 74 52.0 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 53.1 66 56.4 66 54.6 66 42.4 69 53.5 69 54.7 69 42.7 72 49.4 72 43.2 72 42.3 75 43.4 75 38.7 76 34.0 77 28.0 4045 62 43.8 62 46.9 62 48.9 62 38.1 66 44.3 66 47.8 66 40.5 70 44.5 70 41.7 70 40.7 72 41.4 72 38.0 74 34.0 75 28.0 4550 59 36.9 59 39.9 59 42.4 59 34.7 64 37.4 64 41.0 64 38.3 68 38.3 68 39.4 68 38.8 71 38.1 71 37.2 73 34.0 74 28.0 5055 55 31.3 55 34.2 55 36.5 55 31.7 60 31.7 60 35.3 60 35.6 65 32.6 65 35.7 65 35.8 69 33.9 69 34.9 71 32.7 72 27.5 5560 51 26.6 51 29.5 51 31.7 51 29.1 57 27.1 57 30.6 57 32.1 63 28.0 63 31.0 63 31.7 67 29.3 67 31.0 70 30.0 71 26.5 6065 47 22.9 47 25.8 47 28.0 47 26.9 54 23.4 54 27.1 54 28.3 60 24.3 60 27.4 60 27.8 64 25.4 64 27.4 67 26.4 69 24.9 6570 43 20.0 43 22.7 43 25.1 43 24.8 51 20.4 51 24.0 51 25.3 57 21.3 57 24.4 57 24.8 62 22.4 62 24.2 66 23.4 67 22.9 7075 38 17.2 38 20.2 38 22.4 38 22.6 48 17.8 48 21.3 48 22.7 54 18.6 54 21.7 54 22.2 60 19.7 60 21.5 64 20.7 65 20.8 7580 33 14.7 33 17.9 33 20.0 33 20.4 44 15.3 44 18.9 44 20.4 51 16.2 51 19.4 51 19.8 57 17.3 57 19.2 61 18.5 63 18.6 8085 26 12.7 26 15.6 26 18.0 26 18.4 40 13.1 40 17.1 40 18.4 48 14.2 48 17.5 48 18.0 55 15.3 55 17.3 59 16.4 61 16.4 8590 17 11.0 17 14.0 17 16.3 17 16.7 36 11.3 36 15.2 36 16.7 45 12.4 45 15.7 45 16.1 52 13.5 52 15.5 57 14.7 60 14.7 9095 31 9.7 31 13.6 31 15.1 42 10.7 42 14.0 42 14.6 49 11.9 49 13.8 55 12.9 58 13.1 95100 25 8.4 25 12.2 25 13.7 38 9.3 38 12.6 38 13.2 46 10.6 46 12.4 52 11.5 55 11.5 100110 29 6.9 29 10.3 29 10.7 40 8.1 40 10.1 47 9.1 51 9.1 110120 17 4.9 17 8.2 17 8.7 32 6.2 32 8.2 41 7.2 46 7.2 120130 22 4.6 22 6.6 35 5.5 41 5.5 130140 26 4.2 34 4.2 140150 13 3.0 26 3.0 150160 15 2.0 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Counterweight 24,250 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 84.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 67.1 72 70.7 72 61.3 72 51.3 75 64.2 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 51.4 69 54.8 69 56.4 69 46.7 72 51.9 72 55.0 72 44.8 74 50.8 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 40.9 66 44.2 66 47.1 66 42.4 69 41.4 69 45.7 69 42.5 72 42.5 72 42.8 72 42.1 75 42.8 75 38.7 76 34.0 77 28.0 4045 62 33.4 62 36.3 62 39.2 62 38.1 66 33.8 66 37.8 66 38.8 70 34.9 70 37.8 70 38.2 72 35.9 72 36.9 74 34.0 75 28.0 4550 59 27.5 59 30.3 59 33.1 59 33.2 64 27.8 64 31.7 64 33.5 68 28.9 68 32.3 68 32.8 71 30.0 71 32.1 73 30.4 74 27.6 5055 55 22.6 55 25.5 55 28.1 55 28.5 60 22.9 60 26.8 60 28.5 65 23.9 65 27.4 65 27.9 69 25.1 69 27.2 71 26.1 72 25.7 5560 51 18.6 51 21.4 51 24.1 51 24.5 57 19.0 57 22.8 57 24.5 63 19.9 63 23.4 63 23.9 67 21.2 67 23.2 70 22.1 71 22.3 6065 47 15.4 47 18.3 47 20.9 47 21.3 54 15.6 54 19.6 54 21.1 60 16.9 60 20.2 60 20.7 64 18.0 64 20.0 67 18.9 69 19.1 6570 43 12.8 43 15.8 43 18.9 43 18.7 51 13.1 51 17.1 51 18.7 57 14.2 57 17.6 57 18.2 62 15.4 62 17.6 66 16.3 67 16.5 7075 38 10.5 38 13.5 38 16.1 38 16.5 48 11.0 48 15.0 48 16.5 54 11.9 54 15.4 54 16.0 60 13.2 60 15.4 64 14.1 65 14.3 7580 33 8.6 33 11.5 33 14.1 33 14.5 44 9.1 44 13.0 44 14.5 51 9.9 51 13.5 51 13.9 57 11.3 57 13.4 61 12.1 63 12.3 8085 26 6.9 26 9.8 26 12.4 26 12.7 40 7.4 40 11.3 40 12.7 48 8.3 48 11.8 48 12.2 55 9.6 55 11.6 59 10.5 61 10.5 8590 17 5.6 17 8.4 17 10.9 17 11.5 36 6.0 36 9.8 36 11.5 45 6.9 45 10.3 45 10.7 52 8.1 52 10.2 57 9.1 60 9.3 9095 31 4.8 31 8.5 31 10.2 42 5.7 42 9.0 42 9.5 49 6.9 49 8.9 55 7.9 58 8.0 95100 25 3.7 25 7.4 25 8.9 38 4.6 38 7.8 38 8.4 46 5.8 46 7.6 52 6.7 55 6.7 100110 29 2.9 29 5.8 29 6.4 40 4.0 40 5.8 47 4.8 51 4.9 110120 17 4.4 17 4.8 32 2.6 32 4.2 41 3.3 46 3.4 120130 22 2.9 130140 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Outrigger base 24.61 ft

Boom length (ft)

Telescoping sequence %

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 24.61 ft

Boom length (ft)

9

Page 10: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 19,180 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 260.0* 228.0* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 213.5 203.0 73 192.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 183.5 182.5 71 179.0 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 160.5 160.5 68 158.5 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 143.5 143.5 67 141.0 67 114.0 67 101.5 72 131.5 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 127.0 127.0 65 125.0 65 113.0 65 98.2 71 121.0 71 113.0 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 88.4 88.4 59 86.1 59 90.2 59 87.9 66 84.4 66 91.2 66 91.2 66 61.4 71 86.4 71 90.0 71 90.3 71 67.5 2530 30 62.8 62.8 52 60.3 52 65.0 52 66.5 62 59.5 62 65.4 62 68.2 62 54.0 68 60.6 68 64.1 68 68.0 68 61.3 3035 45 46.3 45 50.1 45 51.5 57 45.0 57 50.5 57 52.8 57 47.8 64 46.1 64 49.2 64 52.7 64 53.6 3540 37 36.3 37 40.1 37 41.4 51 35.0 51 40.5 51 42.5 51 41.1 60 36.3 60 39.2 60 42.5 60 44.3 4045 25 28.7 25 32.5 25 33.8 46 27.8 46 32.7 46 35.1 46 35.3 56 28.7 56 31.6 56 34.9 56 36.9 4550 39 22.1 39 27.1 39 29.4 39 29.8 51 23.0 51 26.0 51 29.1 51 30.8 5055 32 17.5 32 22.5 32 24.7 32 25.1 47 18.3 47 21.4 47 24.5 47 26.0 5560 23 13.6 23 18.7 23 20.6 23 21.1 42 14.7 42 17.7 42 20.8 42 22.2 6065 36 11.8 36 14.7 36 17.8 36 19.3 6570 29 9.5 29 12.3 29 15.4 29 16.9 7075 22 7.4 22 9.9 22 13.0 22 14.5 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.

Counterweight 0 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 24.61 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ 1) ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 235.0* 217.5* 75 194.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 198.5 195.0 73 189.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 170.5 170.5 71 168.5 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 149.0 149.0 68 147.0 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 126.5 126.5 67 124.0 67 114.0 67 101.5 72 121.0 72 114.0 72 104.0 72 76.5 76 110.4 76 111.5 76 101.5 76 76.3 1820 53 104.5 104.5 65 101.5 65 110.9 65 97.2 71 100.0 71 110.9 71 102.0 71 71.5 75 101.7 75 106.5 75 100.0 75 73.9 2025 44 66.8 66.6 59 64.3 59 69.3 59 71.0 66 62.8 66 69.8 66 73.0 66 61.4 71 64.2 71 68.2 71 72.7 71 67.5 2530 30 46.9 45.8 52 43.5 52 48.2 52 49.9 62 41.9 62 48.6 62 51.7 62 51.2 68 43.5 68 47.2 68 51.5 68 53.7 3035 45 31.3 45 35.3 45 36.7 57 30.0 57 35.8 57 38.5 57 38.9 64 31.3 64 34.5 64 38.3 64 40.5 3540 37 23.5 37 27.5 37 28.6 51 22.0 51 27.5 51 30.1 51 30.5 60 23.3 60 26.6 60 29.9 60 31.9 4045 25 17.4 25 21.4 25 22.7 46 16.1 46 21.8 46 24.1 46 24.5 56 17.4 56 20.5 56 24.0 56 25.8 4550 39 11.4 39 17.2 39 19.6 39 20.0 51 12.6 51 16.0 51 19.5 51 21.3 5055 32 7.7 32 13.5 32 16.0 32 16.3 47 8.9 47 12.3 47 15.7 47 17.6 5560 23 4.7 23 10.5 23 12.8 23 13.3 42 6.2 42 9.3 42 12.6 42 14.5 6065 36 4.0 36 6.9 36 10.2 36 12.2 6570 29 5.0 29 8.2 29 10.1 7075 22 3.1 22 6.1 22 8.1 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

1) Over rear with superstructure pin engaged*With additional lifting equipment.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

10

Page 11: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 19,180 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 82.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 62.8 72 66.5 72 61.3 72 51.3 75 63.6 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 47.9 69 51.4 69 54.1 69 46.7 72 48.3 72 52.8 72 44.8 74 48.9 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 38.0 66 41.4 66 44.0 66 42.4 69 39.5 69 42.5 69 42.3 72 39.6 72 42.5 72 41.8 75 40.9 75 38.4 76 33.8 77 28.0 4045 62 30.3 62 33.6 62 36.5 62 36.6 66 30.8 66 35.1 66 36.6 70 31.9 70 35.5 70 35.9 72 33.2 72 34.8 74 33.0 75 28.0 4550 59 24.8 59 27.8 59 30.4 59 31.0 64 25.2 64 29.4 64 31.0 68 26.2 68 29.7 68 30.3 71 27.5 71 29.8 73 28.6 74 26.8 5055 55 20.2 55 23.2 55 25.7 55 26.3 60 20.7 60 24.7 60 26.3 65 21.7 65 25.0 65 25.6 69 23.0 69 25.1 71 24.0 72 24.1 5560 51 16.4 51 19.5 51 22.1 51 22.6 57 16.8 57 20.8 57 22.6 63 17.9 63 21.5 63 21.9 67 19.3 67 21.3 70 20.2 71 20.4 6065 47 13.4 47 16.7 47 19.1 47 19.6 54 13.8 54 17.8 54 19.6 60 14.9 60 18.5 60 18.9 64 16.2 64 18.2 67 17.3 69 17.3 6570 43 10.9 43 14.1 43 16.5 43 17.0 51 11.4 51 15.4 51 17.0 57 12.5 57 15.9 57 16.5 62 13.7 62 15.8 66 14.8 67 14.9 7075 38 8.9 38 11.9 38 14.4 38 14.9 48 9.3 48 13.3 48 14.9 54 10.4 54 13.7 54 14.3 60 11.5 60 13.6 64 12.6 65 12.8 7580 33 7.1 33 10.0 33 12.6 33 13.2 44 7.5 44 11.5 44 13.2 51 8.6 51 11.9 51 12.4 57 9.7 57 11.7 61 10.8 63 10.9 8085 26 5.6 26 8.7 26 11.1 26 11.6 40 5.8 40 9.8 40 11.6 48 6.9 48 10.2 48 10.7 55 8.0 55 10.2 59 9.1 61 9.4 8590 17 4.4 17 7.3 17 9.8 17 10.2 36 4.6 36 8.4 36 10.0 45 5.6 45 9.0 45 9.5 52 6.8 52 8.7 57 7.8 60 7.8 9095 31 3.5 31 7.3 31 8.7 42 4.4 42 7.9 42 8.3 49 5.7 49 7.5 55 6.5 58 6.5 95100 25 2.3 25 6.3 25 7.7 38 3.5 38 6.7 38 7.2 46 4.6 46 6.5 52 5.5 55 5.5 100110 29 4.9 29 5.4 40 2.9 40 4.7 47 3.6 51 4.0 110120 17 3.5 17 3.9 32 3.1 46 2.3 120130 130140 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Counterweight 0 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 86.4 77 84.5 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 66.6 74 70.5 74 64.5 74 56.5 77 63.1 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 45.6 72 49.7 72 53.2 72 50.9 75 46.3 75 51.7 75 46.5 77 47.6 77 45.7 77 45.7 78 43.3 78 38.8 79 34.0 3035 69 33.1 69 36.7 69 40.0 69 40.6 72 33.8 72 38.5 72 40.0 74 34.8 74 39.0 74 39.4 76 36.3 76 37.3 77 33.4 78 28.0 3540 66 25.3 66 28.4 66 31.4 66 32.1 69 25.7 69 30.1 69 32.1 72 26.8 72 30.8 72 31.4 75 28.1 75 30.5 76 29.2 77 27.5 4045 62 19.4 62 22.7 62 25.4 62 26.0 66 19.8 66 24.1 66 26.0 70 20.9 70 24.7 70 25.4 72 22.3 72 24.5 74 23.4 75 23.3 4550 59 14.6 59 18.2 59 21.0 59 21.5 64 15.0 64 19.6 64 21.5 68 16.3 68 20.2 68 20.8 71 17.6 71 20.0 73 19.0 74 19.1 5055 55 10.7 55 14.4 55 17.4 55 17.8 60 11.3 60 16.0 60 17.8 65 12.5 65 16.5 65 17.1 69 13.9 69 16.3 71 15.3 72 15.3 5560 51 7.7 51 11.2 51 14.3 51 14.7 57 8.4 57 12.9 57 14.7 63 9.5 63 13.4 63 14.1 67 11.0 67 13.2 70 12.1 71 12.1 6065 47 5.6 47 8.9 47 11.8 47 12.2 54 6.0 54 10.3 54 12.2 60 7.1 60 10.9 60 11.6 64 8.5 64 10.7 67 9.6 69 9.8 6570 43 3.7 43 7.0 43 9.7 43 10.1 51 4.1 51 8.3 51 10.1 57 5.2 57 8.8 57 9.6 62 6.5 62 8.7 66 7.6 67 7.9 7075 38 10.5 38 5.3 38 8.0 38 8.4 48 2.3 48 6.6 48 8.4 54 3.6 54 7.2 54 8.0 60 5.0 60 7.2 64 6.0 65 6.1 7580 33 3.9 33 6.5 33 6.9 44 5.2 44 6.9 51 5.9 51 6.5 57 3.7 57 5.8 61 4.6 63 4.6 8085 26 2.7 26 5.4 26 5.6 40 4.0 40 5.6 48 4.7 48 5.2 55 2.5 55 4.5 59 3.4 61 3.4 8590 17 4.3 17 4.7 36 3.0 36 4.7 45 3.5 45 4.1 52 3.3 57 2.2 60 2.2 9095 31 3.8 42 2.7 42 3.2 49 2.1 95100 25 2.9 38 2.4 100110 110120 120130 130140 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 24.61 ft

Boom length (ft)

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Outrigger base 24.61 ft

Boom length (ft)

Telescoping sequence %

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

11

Page 12: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 77,160 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 16.40 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 203.5 75 193.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 181.0 73 179.5 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 162.5 71 161.5 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 147.5 68 145.5 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 135.0 67 133.0 67 114.0 67 101.5 72 131.0 72 114.0 72 104.0 72 76.5 76 113.5 76 111.5 76 101.5 76 76.3 1820 53 123.5 65 122.0 65 113.5 65 98.2 71 121.0 71 113.5 71 103.5 71 71.5 75 110.0 75 108.5 75 101.5 75 73.9 2025 44 96.6 59 94.9 59 98.5 59 87.9 66 92.1 66 97.3 66 95.6 66 61.4 71 87.7 71 91.1 71 91.1 71 67.5 2530 30 71.6 52 69.6 52 73.7 52 74.3 62 68.5 62 74.0 62 76.4 62 54.0 68 66.9 68 70.0 68 73.7 68 61.3 3035 45 54.1 45 58.0 45 59.1 57 53.1 57 58.3 57 60.5 57 47.8 64 54.1 64 57.0 64 60.4 64 55.1 3540 37 43.8 37 47.3 37 48.4 51 42.7 51 47.5 51 49.7 51 42.9 60 43.8 60 46.4 60 49.7 60 49.2 4045 25 36.1 25 39.4 25 40.5 46 34.9 46 39.6 46 41.6 46 38.9 56 35.9 56 38.5 56 41.6 56 43.0 4550 39 29.0 39 33.5 39 35.5 39 35.0 51 29.9 51 32.5 51 35.5 51 37.1 5055 32 24.1 32 28.5 32 30.5 32 30.9 47 25.0 47 27.7 47 30.4 47 32.0 5560 23 19.9 23 24.3 23 26.3 23 26.5 42 21.0 42 23.6 42 26.3 42 27.8 6065 36 17.8 36 20.3 36 23.1 36 24.6 6570 29 15.2 29 17.6 29 20.4 29 21.9 7075 22 12.7 22 15.1 22 17.7 22 19.2 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 16.40 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 201.0 75 193.0 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 178.5 73 177.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 160.5 71 159.0 71 114.0 71 104.0 75 151.5 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 145.0 68 143.5 68 114.0 68 104.0 73 141.0 73 114.0 73 104.0 73 81.7 77 116.5 77 114.0 77 101.5 77 78.8 1618 57 133.0 67 131.5 67 114.0 67 101.5 72 122.5 72 114.0 72 104.0 72 76.5 76 107.5 76 111.5 76 101.5 76 76.3 1820 53 120.5 65 119.0 65 112.5 65 98.2 71 103.5 71 111.5 71 103.5 71 71.5 75 97.8 75 107.0 75 101.5 75 73.9 2025 44 85.1 59 82.6 59 86.8 59 85.6 66 77.2 66 83.4 66 88.3 66 61.4 71 73.9 71 77.4 71 84.7 71 67.5 2530 30 62.5 52 60.7 52 64.5 52 66.5 62 59.4 62 64.9 62 67.3 62 54.0 68 58.2 68 61.2 68 64.8 68 61.3 3035 45 46.9 45 50.5 45 51.8 57 45.7 57 50.9 57 53.1 57 47.8 64 46.5 64 49.6 64 52.9 64 53.6 3540 37 37.5 37 41.0 37 42.1 51 36.4 51 41.2 51 43.4 51 42.6 60 37.5 60 40.1 60 43.4 60 45.2 4045 25 30.6 25 33.9 25 35.0 46 29.5 46 34.2 46 36.2 46 36.4 56 30.4 56 33.1 56 36.2 56 37.9 4550 39 24.3 39 28.7 39 30.7 39 31.0 51 25.1 51 27.6 51 30.6 51 32.4 5055 32 20.0 32 24.3 32 26.3 32 26.6 47 20.9 47 23.3 47 26.1 47 27.8 5560 23 16.3 23 20.4 23 22.4 23 22.9 42 17.3 42 19.7 42 22.4 42 24.1 6065 36 14.5 36 16.9 36 19.5 36 21.1 6570 29 12.0 29 14.5 29 17.1 29 18.7 7075 22 9.7 22 12.1 22 14.8 22 16.3 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

12

Page 13: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 77,160 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 84.4 74 84.9 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 65.2 72 68.9 72 61.3 72 51.3 75 64.0 75 58.2 75 46.8 77 53.4 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 54.0 69 57.4 69 58.3 69 46.7 72 52.4 72 57.2 72 44.8 74 52.0 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 45.3 66 48.4 66 51.0 66 42.4 69 43.9 69 48.3 69 42.7 72 43.6 72 43.2 72 42.3 75 43.0 75 38.7 76 34.0 77 28.0 4045 62 37.4 62 40.3 62 42.9 62 38.1 66 37.6 66 41.6 66 40.5 70 37.5 70 40.6 70 40.7 72 37.6 72 38.0 74 34.0 75 28.0 4550 59 31.4 59 34.3 59 36.8 59 34.7 64 31.9 64 35.6 64 36.6 68 32.4 68 35.9 68 36.2 71 32.9 71 34.8 73 32.9 74 28.0 5055 55 26.6 55 29.3 55 31.8 55 31.4 60 27.0 60 30.5 60 32.2 65 27.9 65 31.1 65 31.5 69 28.7 69 30.7 71 30.0 72 27.3 5560 51 22.5 51 25.2 51 27.6 51 28.0 57 23.0 57 26.5 57 28.0 63 23.8 63 26.9 63 27.4 67 24.9 67 26.7 70 25.8 71 25.7 6065 47 19.4 47 22.0 47 24.2 47 24.7 54 19.6 54 23.1 54 24.7 60 20.5 60 23.6 60 24.2 64 21.6 64 23.5 67 22.5 69 22.6 6570 43 16.6 43 19.2 43 21.5 43 21.9 51 17.0 51 20.5 51 21.9 57 17.9 57 20.9 57 21.5 62 19.0 62 20.8 66 19.8 67 19.9 7075 38 14.3 38 16.9 38 19.1 38 19.5 48 14.7 48 18.2 48 19.5 54 15.5 54 18.6 54 19.0 60 16.6 60 18.4 64 17.5 65 17.6 7580 33 12.4 33 15.0 33 17.2 33 17.4 44 12.8 44 16.1 44 17.4 51 13.5 51 16.5 51 17.0 57 14.6 57 16.3 61 15.4 63 15.6 8085 26 10.7 26 13.1 26 15.3 26 15.8 40 10.9 40 14.2 40 15.8 48 11.8 48 14.7 48 15.3 55 12.9 55 14.7 59 13.8 61 13.8 8590 17 9.2 17 11.7 17 13.8 17 14.2 36 9.5 36 12.8 36 14.2 45 10.3 45 13.3 45 13.8 52 11.4 52 13.1 57 12.2 60 12.2 9095 31 8.2 31 11.5 31 12.8 42 9.0 42 11.9 42 12.4 49 10.1 49 11.7 55 10.8 58 10.9 95100 25 7.0 25 10.3 25 11.6 38 7.8 38 10.7 38 11.1 46 8.9 46 10.5 52 9.6 55 9.8 100110 29 5.8 29 8.7 29 9.1 40 6.9 40 8.5 47 7.6 51 7.8 110120 17 4.1 17 7.0 17 7.4 32 5.2 32 6.8 41 5.9 46 6.1 120130 22 3.7 22 5.5 35 4.6 41 4.6 130140 26 3.3 34 3.5 140150 13 2.3 26 2.5 150160 15 5.9 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Counterweight 63,490 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 87.3 78 84.9 78 67.9 78 60.6 1820 77 87.3 77 84.9 77 67.7 77 60.4 79 67.9 79 58.2 79 48.5 2025 74 74.9 74 76.1 74 64.5 74 56.5 77 67.9 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 56.9 72 60.5 72 61.3 72 51.3 75 54.8 75 58.2 75 46.8 77 52.6 77 45.9 77 45.9 78 43.7 78 38.8 79 34.0 3035 69 46.6 69 50.1 69 53.7 69 46.7 72 45.3 72 51.1 72 44.8 74 44.2 74 44.5 74 44.1 76 43.7 76 38.8 77 34.0 78 28.0 3540 66 39.0 66 42.1 66 44.7 66 42.4 69 37.9 69 42.2 69 42.4 72 37.5 72 42.6 72 41.9 75 37.3 75 38.3 76 33.7 77 28.0 4045 62 32.0 62 34.9 62 37.5 62 37.1 66 32.1 66 36.0 66 37.5 70 32.1 70 35.9 70 36.3 72 32.2 72 34.3 74 31.3 75 28.0 4550 59 26.5 59 29.4 59 31.9 59 32.2 64 27.0 64 30.7 64 32.4 68 27.5 68 30.9 68 31.6 71 28.0 71 30.4 73 28.1 74 26.4 5055 55 22.2 55 25.0 55 27.4 55 27.8 60 22.6 60 26.3 60 27.8 65 23.5 65 26.7 65 27.3 69 24.3 69 26.6 71 24.9 72 24.1 5560 51 18.6 51 21.3 51 23.7 51 24.1 57 19.1 57 22.6 57 24.1 63 20.0 63 23.0 63 23.5 67 21.1 67 23.0 70 21.9 71 21.6 6065 47 15.8 47 18.4 47 20.7 47 21.1 54 16.2 54 19.6 54 21.1 60 17.1 60 20.2 60 20.6 64 18.2 64 20.0 67 19.1 69 19.0 6570 43 13.4 43 16.0 43 18.2 43 18.7 51 13.8 51 17.1 51 18.7 57 14.7 57 17.8 57 18.2 62 15.8 62 17.6 66 16.7 67 16.7 7075 38 11.3 38 13.9 38 16.2 38 16.6 48 11.7 48 15.1 48 16.6 54 12.6 54 15.6 54 16.1 60 13.7 60 15.5 64 14.5 65 14.6 7580 33 9.5 33 12.2 33 14.3 33 14.8 44 10.0 44 13.3 44 14.8 51 10.8 51 13.7 51 14.2 57 11.9 57 13.7 61 12.6 63 12.8 8085 26 8.0 26 10.7 26 12.7 26 13.1 40 8.5 40 11.8 40 13.1 48 9.1 48 12.2 48 12.7 55 10.2 55 12.0 59 11.1 61 11.1 8590 17 6.7 17 9.3 17 11.5 17 11.7 36 7.1 36 10.4 36 11.7 45 7.9 45 10.9 45 11.3 52 8.9 52 10.6 57 9.8 60 9.8 9095 31 5.9 31 9.2 31 10.5 42 6.8 42 9.6 42 10.1 49 7.7 49 9.4 55 8.6 58 8.6 95100 25 4.8 25 8.1 25 9.4 38 5.6 38 8.5 38 8.9 46 6.7 46 8.3 52 7.6 55 7.6 100110 29 3.8 29 6.7 29 7.1 40 4.9 40 6.7 47 5.8 51 5.8 110120 17 2.1 17 5.3 17 5.7 32 3.3 32 5.0 41 4.2 46 4.2 120130 22 3.7 35 3.0 41 3.0 130140 34 2.0 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 16.40 ft

Boom length (ft)

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Outrigger base 16.40 ft

Boom length (ft)

Telescoping sequence %

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

13

Page 14: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 16.40 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 197.0 75 192.5 75 114.0 75 104.0 79 162.0 79 114.0 79 104.0 79 96.6 1012 66 175.0 73 174.0 73 114.0 73 104.0 77 158.0 77 114.0 77 104.0 77 91.8 1214 63 157.0 71 156.0 71 114.0 71 104.0 75 140.0 75 114.0 75 104.0 75 86.8 78 119.5 78 114.0 78 101.5 78 81.4 1416 60 142.5 68 129.5 68 114.0 68 104.0 73 114.0 73 114.0 73 104.0 73 81.7 77 106.0 77 114.0 77 101.5 77 78.8 1618 57 123.0 67 109.0 67 107.0 67 101.5 72 98.3 72 103.5 72 104.0 72 76.5 76 91.9 76 99.7 76 95.5 76 76.3 1820 53 103.0 65 93.2 65 98.1 65 97.2 71 84.4 71 91.2 71 101.5 71 71.5 75 79.7 75 83.2 75 87.4 75 73.9 2025 44 69.6 59 67.1 59 71.4 59 73.0 66 62.2 66 68.4 66 71.0 66 61.4 71 59.5 71 63.1 71 66.8 71 67.5 2530 30 50.6 52 48.6 52 52.6 52 53.9 62 47.5 62 53.0 62 55.4 62 53.3 68 46.2 68 49.3 68 52.8 68 55.2 3035 45 37.2 45 40.8 45 42.0 57 35.9 57 41.1 57 43.4 57 42.9 64 36.7 64 39.7 64 43.1 64 44.9 3540 37 29.2 37 32.7 37 33.9 51 28.1 51 33.0 51 35.2 51 35.6 60 29.2 60 31.9 60 35.0 60 36.9 4045 25 23.4 25 26.7 25 27.8 46 22.3 46 26.9 46 29.1 46 29.6 56 23.4 56 26.0 56 28.9 56 30.7 4550 39 17.9 39 22.4 39 24.4 39 24.9 51 18.8 51 21.4 51 24.2 51 26.0 5055 32 14.3 32 18.7 32 20.7 32 21.0 47 15.2 47 17.6 47 20.4 47 22.1 5560 23 11.1 23 15.5 23 17.5 23 17.7 42 12.1 42 14.5 42 17.4 42 18.9 6065 36 9.8 36 12.2 36 14.9 36 16.4 6570 29 7.9 29 10.1 29 12.8 29 14.3 7075 22 6.0 22 8.1 22 10.8 22 12.3 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

Counterweight 24,250 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 16.40 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9 86.6 86.6 86.6 86.6° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 192.5 75 191.0 75 114.0 75 104.0 79 159.5 79 114.0 79 104.0 79 96.6 1012 66 171.0 73 160.0 73 114.0 73 104.0 77 126.5 77 114.0 77 104.0 77 91.8 1214 63 141.0 71 116.5 71 114.0 71 104.0 75 102.0 75 17.5 75 104.0 75 86.8 78 93.1 78 101.5 78 101.5 78 81.4 1416 60 109.0 68 95.3 68 101.0 68 104.0 73 84.3 73 91.7 73 94.8 73 81.7 77 78.1 77 82.3 77 88.4 77 78.8 1618 57 91.8 67 81.0 67 86.1 67 90.8 72 72.1 72 79.1 72 82.3 72 76.5 76 67.5 76 71.4 76 75.7 76 76.3 1820 53 76.8 65 68.5 65 73.1 65 75.1 71 61.4 71 68.0 71 71.0 71 70.9 75 58.0 75 61.7 75 65.9 75 72.7 2025 44 50.9 59 48.1 59 52.6 59 54.1 66 44.2 66 50.3 66 52.8 66 53.4 71 42.4 71 46.0 71 49.6 71 51.9 2530 30 36.1 52 34.1 52 38.1 52 39.4 62 32.8 62 38.5 62 40.9 62 41.3 68 32.1 68 35.4 68 38.9 68 40.9 3035 45 25.3 45 28.9 45 30.2 57 24.1 57 29.2 57 31.5 57 32.0 64 25.0 64 27.9 64 31.1 64 33.1 3540 37 19.3 37 22.6 37 23.9 51 18.2 51 23.0 51 25.2 51 25.6 60 29.0 60 21.9 60 25.0 60 26.7 4045 25 14.7 25 18.0 25 19.2 46 13.6 46 18.3 46 20.5 46 20.7 56 14.5 56 17.2 56 20.3 56 22.0 4550 39 10.2 39 14.7 39 16.8 39 17.1 51 11.1 51 13.7 51 16.7 51 18.3 5055 32 7.4 32 11.8 32 13.7 32 14.2 47 8.3 47 10.9 47 13.7 47 15.3 5560 23 5.1 23 9.5 23 11.2 23 11.6 42 6.0 42 8.5 42 11.3 42 12.8 6065 36 4.2 36 6.6 36 9.3 36 10.8 6570 29 2.6 29 5.1 29 7.7 29 9.3 7075 22 3.6 22 6.2 22 7.7 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 46 46 46 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 0 46 46 46 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 0 0 46 92 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

14

Page 15: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 82.6 78 84.9 78 67.9 78 60.6 1820 77 76.3 77 83.2 77 67.7 77 60.4 79 67.2 79 58.2 79 48.5 2025 74 58.1 74 61.6 74 64.5 74 56.5 77 55.5 77 58.2 77 48.5 78 53.4 78 46.1 78 46.1 2530 72 45.6 72 49.1 72 52.0 72 51.3 75 43.9 75 48.3 75 46.8 77 42.9 77 45.9 77 45.9 78 42.9 78 38.8 79 34.0 3035 69 36.9 69 40.3 69 43.2 69 43.9 72 35.7 72 40.1 72 42.1 74 35.2 74 40.0 74 40.4 76 35.3 76 38.8 77 34.0 78 28.0 3540 66 30.4 66 33.7 66 36.5 66 36.9 69 29.6 69 33.8 69 35.7 72 29.4 72 33.1 72 33.6 75 29.7 75 31.9 76 29.7 77 27.6 4045 62 24.8 62 27.8 62 30.3 62 30.7 66 24.9 66 28.9 66 30.5 70 24.9 70 28.4 70 29.1 72 25.3 72 27.5 74 25.3 75 24.8 4550 59 20.4 59 23.1 59 25.5 59 26.0 64 20.6 64 24.4 64 26.0 68 21.2 68 24.6 68 25.2 71 21.7 71 23.8 73 21.9 74 21.7 5055 55 16.7 55 19.3 55 21.8 55 22.2 60 16.9 60 20.7 60 22.2 65 17.8 65 22.1 65 21.7 69 18.7 69 20.6 71 19.0 72 18.8 5560 51 13.6 51 16.3 51 18.7 51 19.1 57 13.9 57 17.6 57 19.1 63 14.8 63 21.1 63 18.5 67 16.1 67 17.8 70 16.6 71 16.4 6065 47 11.1 47 13.8 47 16.2 47 16.4 54 11.5 54 15.1 54 16.6 60 12.4 60 15.5 60 16.0 64 13.5 64 15.3 67 14.4 69 14.4 6570 43 9.2 43 11.8 43 14.1 43 14.5 51 9.5 51 13.0 51 14.5 57 10.4 57 13.4 57 13.9 62 11.5 62 13.2 66 12.3 67 12.5 7075 38 7.7 38 10.1 38 12.3 38 12.7 48 7.7 48 11.2 48 12.7 54 8.6 54 11.6 54 12.1 60 9.7 60 11.5 64 10.6 65 10.7 7580 33 7.4 33 8.5 33 10.7 33 11.1 44 6.3 44 9.6 44 11.1 51 7.2 51 10.0 51 10.5 57 8.3 57 10.0 61 9.1 63 9.1 8085 26 4.8 26 7.1 26 9.3 26 9.8 40 4.9 40 8.2 40 9.8 48 5.8 48 8.7 48 9.1 55 4.8 55 8.7 59 7.8 61 7.8 8590 17 3.5 17 6.1 17 8.2 17 8.6 36 3.9 36 7.2 36 8.6 45 4.6 45 7.7 45 8.1 52 5.7 52 7.5 57 6.6 60 6.6 9095 31 2.9 31 6.2 31 7.5 42 3.7 42 6.6 42 7.1 49 4.8 49 6.4 55 5.5 58 5.6 95100 25 5.2 25 6.6 38 2.8 38 5.7 38 6.1 46 3.9 46 5.5 52 4.6 55 4.8 100110 29 4.2 29 4.6 40 2.2 40 4.0 47 3.1 51 3.1 110120 17 2.8 17 3.3 32 2.6 120130 130140 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Counterweight 24,250 lbs

Work. Work.Radius Radius

(ft) (ft)

101.4 101.4 101.4 101.4 116.1 116.1 116.1 130.9 130.9 130.9 145.7 145.7 160.4 170.6° ° ° ° ° ° ° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 1012 1214 1416 1618 78 64.5 78 68.4 78 67.9 78 60.6 1820 77 55.9 77 59.8 77 66.5 77 60.4 79 52.7 79 57.3 79 48.5 2025 74 41.7 74 45.3 74 48.7 74 50.9 77 39.8 77 44.7 77 45.5 78 38.8 78 42.5 78 42.9 2530 72 32.2 72 35.6 72 38.5 72 39.2 75 30.9 75 35.3 75 37.2 77 30.4 77 34.4 77 35.1 3035 69 25.3 69 28.6 69 31.4 69 32.0 72 24.5 72 28.8 72 30.7 74 24.3 74 28.3 74 28.8 3540 66 20.0 66 23.5 66 26.3 66 26.7 69 19.8 69 23.8 69 25.7 72 37.5 72 23.6 72 24.0 4045 62 16.0 62 19.1 62 21.6 62 22.0 66 15.9 66 20.1 66 21.9 70 19.8 70 19.9 70 20.5 4550 59 12.6 59 15.6 59 18.0 59 18.4 64 12.9 64 16.7 64 18.4 68 16.3 68 17.0 68 17.5 5055 55 9.8 55 12.6 55 15.0 55 15.4 60 10.2 60 13.7 60 15.4 65 13.5 65 14.4 65 14.8 5560 51 7.4 51 10.2 51 12.4 51 12.8 57 7.8 57 11.3 57 12.8 63 10.9 63 12.0 63 12.4 6065 47 5.5 47 8.2 47 10.6 47 10.8 54 6.0 54 9.5 54 10.8 60 8.7 60 9.9 60 10.4 6570 43 4.0 43 6.6 43 8.9 43 9.3 51 4.4 51 7.8 51 9.3 57 6.8 57 8.4 57 8.8 7075 38 2.5 38 5.3 38 7.5 38 7.8 48 3.1 48 6.4 48 7.8 54 5.3 54 7.0 54 7.4 7580 33 4.2 33 6.3 33 6.6 44 5.3 44 6.6 51 3.9 51 5.7 51 6.1 8085 26 3.1 26 5.1 26 5.6 40 4.2 40 5.6 48 2.5 48 4.7 48 5.1 8590 17 4.3 17 4.7 36 3.4 36 4.7 45 3.8 45 4.3 9095 31 2.6 31 3.9 42 3.0 42 3.4 95100 25 3.1 38 2.2 38 2.7 100110 110120 120130 130140 140150 150160 160170 170180 180190 190

Tel. 1 92 46 0 0 92 46 0 92 46 0 92 46 92 100 Tel. 1Tel. 2 46 46 46 0 92 46 46 92 46 92 92 92 92 100 Tel. 2Tel. 3 46 46 46 92 46 46 92 92 92 92 92 92 92 100 Tel. 3Tel. 4 0 46 92 92 0 92 92 0 92 92 46 92 92 100 Tel. 4

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Outrigger base 16.40 ft

Boom length (ft)

Telescoping sequence %

Lifting capacities in 1,000 lbs according per SAE J765 on telescopic boomOn outriggers, 360° working area

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Outrigger base 16.40 ft

Boom length (ft)

Telescoping sequence %

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

15

Page 16: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 0 lbsLifting capacities in 1,000 lbs according per SAE J765 on telescopic boom

On outriggers, 360° working areaWork. Outrigger base 16.40 ft Work.Radius Radius

(ft) Boom length (ft) (ft)

42.7 57.1 57.1 57.1 71.9 71.9 71.9 71.9° ° ° ° ° ° ° °

∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠10 69 161.0 75 127.0 75 114.0 75 104.3 79 103.3 79 111.9 79 104.0 79 96.6 1012 66 114.0 73 93.4 73 105.0 73 99.3 77 79.0 77 87.4 77 96.7 77 91.8 1214 63 86.1 71 72.5 71 78.4 71 80.8 75 62.0 75 70.2 75 73.8 75 78.1 1416 60 68.6 68 57.8 68 63.0 68 65.6 73 50.0 73 57.6 73 61.1 73 61.6 1618 57 57.1 67 48.1 67 53.1 67 55.4 72 41.9 72 48.8 72 52.1 72 52.8 1820 53 46.8 65 39.9 65 44.7 65 46.6 71 34.9 71 41.1 71 44.1 71 45.0 2025 44 29.5 59 26.9 59 31.3 59 32.7 66 23.4 66 29.4 66 32.2 66 32.8 2530 30 19.6 52 17.7 52 21.6 52 22.9 62 16.0 62 21.7 62 24.3 62 24.7 3035 45 11.7 45 15.4 45 16.6 57 10.6 57 15.7 57 18.0 57 18.4 3540 37 7.8 37 11.3 37 12.4 51 6.7 51 11.5 51 13.7 51 14.1 4045 25 4.8 25 8.1 25 9.2 46 3.6 46 8.3 46 10.5 46 10.8 4550 39 5.9 39 8.0 39 8.4 5055 32 4.0 32 6.0 32 6.3 5560 23 2.3 23 4.3 23 4.5 6065 6570 7075 7580 8085 8590 9095 95100 100110 110120 120130 130140 140150 150

Telescoping sequence %Tel. 1 0 46 0 0 92 46 0 0 Tel. 1Tel. 2 0 0 0 0 0 46 0 0 Tel. 2Tel. 3 0 0 46 0 0 0 46 0 Tel. 3Tel. 4 0 0 0 46 0 0 46 92 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

16

Page 17: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

ATF110G-5 WORKING RANGE CHART

Load radius from Axis of Rotation in Feet

NOTE: Boom and jib geometry shown are for unloaded condition and machine standing level on firmsupporting surface. Boom deflection and subsequent radius and boom angle change must beaccounted for when applying load to hook.

17

Lifting H

eig

ht in

Feet

Page 18: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 77,160 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 f

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 17.0 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 16.5 71 14.7 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 15.8 70 14.2 71 11.1 70 12.3 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 15.2 68 13.6 69 10.9 68 12.1 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 14.6 66 13.1 68 10.8 67 11.8 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 14.0 64 12.6 66 10.6 66 11.5 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95

100 61 13.4 63 12.2 65 10.4 65 11.2 68 8.2 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 12.5 59 11.5 61 10.0 64 10.1 64 7.6 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 11.5 55 10.8 57 9.6 58 9.3 61 7.2 64 5.7 62 5.1 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 49 9.7 52 10.0 53 9.3 55 8.6 58 6.8 60 5.5 59 4.7 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 45 7.9 47 8.3 48 8.5 51 7.9 55 6.3 57 5.3 56 4.3 61 3.7 65 3.2 60 3.2 66 2.6 70 2.1 140150 40 6.4 42 6.6 43 7.0 48 7.3 51 6.1 53 5.2 53 3.9 58 3.4 62 3.1 57 2.8 63 2.4 67 2.0 150160 34 5.0 36 5.3 36 5.3 44 6.2 47 5.8 49 5.1 50 3.6 55 3.3 58 2.9 55 2.6 60 2.3 64 2.0 160170 27 3.9 29 3.9 29 3.9 39 5.1 42 5.5 44 5.0 47 3.3 52 3.1 55 2.9 52 2.3 57 2.1 170180 18 3.0 19 2.9 18 2.6 34 4.3 37 4.5 38 4.5 44 3.1 49 2.8 51 2.8 49 2.2 54 2.0 180190 28 3.4 31 3.4 30 3.4 40 2.8 44 2.8 47 2.7 46 2.0 190200 21 2.3 22 2.3 20 1.9 36 2.5 40 2.6 42 2.5 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 77,160 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 f

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 14.6 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 14.3 71 13.5 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 13.5 69 12.8 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 12.7 68 12.1 70 10.8 68 10.8 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 11.9 66 11.4 68 10.6 67 10.4 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95

100 63 11.1 65 10.7 67 10.3 66 10.0 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 9.8 61 9.5 63 9.4 62 8.9 66 7.0 68 5.1 66 5.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 8.7 58 8.4 59 8.4 60 8.0 63 6.4 65 4.9 64 5.4 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 52 7.7 54 7.5 56 7.5 57 7.1 60 6.1 62 4.8 61 4.9 66 4.0 69 3.3 64 3.7 70 2.9 74 2.2 130140 48 6.9 50 6.8 52 6.8 54 6.4 57 5.8 59 4.6 59 4.5 63 3.8 67 3.3 62 3.3 67 2.7 72 2.2 140150 44 6.1 46 6.1 47 6.1 50 5.7 54 5.5 56 4.5 56 4.1 61 3.5 64 3.1 59 3.1 65 2.5 69 2.1 150160 39 5.0 41 5.3 42 5.4 47 5.1 50 5.1 52 4.4 53 3.8 58 3.4 61 3.0 57 2.7 62 2.4 66 2.0 160170 33 3.9 36 4.1 36 4.1 43 4.5 46 4.5 48 4.3 50 3.5 55 3.2 58 2.9 54 2.4 60 2.2 170180 27 2.9 29 3.0 29 2.9 39 4.0 42 4.2 43 4.0 47 3.3 52 3.0 54 2.8 52 2.3 57 2.0 180190 34 3.2 37 3.4 37 3.4 44 3.1 48 2.9 50 2.8 49 2.1 54 2.0 190200 28 2.4 31 2.6 31 2.3 40 2.6 45 2.7 47 2.5 46 1.9 200210 36 2.3 40 2.5 41 2.2 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

100100100100

92

Boom length 43.3 ft to 170.6 ft

Boom length 42.7 ft to 160.4 ft

929292

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

18

Page 19: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 f

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 17.0 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 16.5 71 14.7 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 15.8 70 14.2 71 11.1 70 12.3 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 15.2 68 13.6 69 10.9 68 12.1 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 14.6 66 13.1 68 10.8 67 11.8 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 14.0 64 12.6 66 10.6 66 11.5 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95

100 61 13.4 63 12.2 65 10.4 65 11.2 68 8.2 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 11.7 59 11.5 61 10.0 64 10.1 64 7.6 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 9.5 55 10.2 57 9.6 58 9.3 61 7.2 64 5.7 62 5.1 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 49 7.7 52 8.3 53 8.5 55 8.6 58 6.8 60 5.5 59 4.7 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 45 5.9 47 6.5 48 6.6 51 7.4 55 6.3 57 5.3 56 4.3 61 3.7 65 3.2 60 3.2 66 2.6 70 2.1 140150 40 4.7 42 5.0 43 5.0 48 6.0 51 6.1 53 5.2 53 3.9 58 3.4 62 3.1 57 2.8 63 2.4 67 2.0 150160 34 3.3 36 3.6 36 3.6 44 4.8 47 5.3 49 5.0 50 3.6 55 3.3 58 2.9 55 2.6 60 2.3 64 2.0 160170 27 2.5 29 2.5 29 2.4 39 3.7 42 4.1 44 4.2 47 3.3 52 3.1 55 2.9 52 2.3 57 2.1 170180 18 1.8 19 1.8 34 2.7 37 3.1 38 3.1 44 3.1 49 2.8 51 2.8 49 2.2 54 2.0 180190 28 2.0 31 2.0 30 2.0 40 2.4 44 2.7 47 2.7 46 2.0 190200 36 1.8 40 2.3 42 2.5 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 f

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 14.6 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 14.3 71 13.5 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 13.5 69 12.8 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 12.7 68 12.1 70 10.8 68 10.8 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 11.9 66 11.4 68 10.6 67 10.4 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95

100 63 11.1 65 10.7 67 10.3 66 10.0 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 9.8 61 9.5 63 9.4 62 8.9 66 7.0 68 5.1 66 5.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 8.7 58 8.4 59 8.4 60 8.0 63 6.4 65 4.9 64 5.4 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 52 7.5 54 7.5 56 7.5 57 7.1 60 6.1 62 4.8 61 4.9 66 4.0 69 3.3 64 3.7 70 2.9 74 2.2 130140 48 5.9 50 6.5 52 6.6 54 6.4 57 5.8 59 4.6 59 4.5 63 3.8 67 3.3 62 3.3 67 2.7 72 2.2 140150 44 4.5 46 4.9 47 5.0 50 5.7 54 5.5 56 4.5 56 4.1 61 3.5 64 3.1 59 3.1 65 2.5 69 2.1 150160 39 3.3 41 3.6 42 3.7 47 4.6 50 5.0 52 4.4 53 3.8 58 3.4 61 3.0 57 2.7 62 2.4 66 2.0 160170 33 2.4 36 2.5 36 2.5 43 3.5 46 3.9 48 4.1 50 3.5 55 3.2 58 2.9 54 2.4 60 2.2 170180 29 1.8 29 1.8 39 2.6 42 3.0 43 3.1 47 3.1 52 3.0 54 2.8 52 2.3 57 2.0 180190 34 1.8 37 2.2 37 2.2 44 2.4 48 2.9 50 2.8 49 2.1 54 2.0 190200 40 1.8 45 2.2 47 2.4 46 1.9 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

92929292

100100

Boom length 43.3 ft to 170.6 ft

100100

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

19

Page 20: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 17.0 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 16.5 71 14.7 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 15.8 70 14.2 71 11.1 70 12.3 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 15.2 68 13.6 69 10.9 68 12.1 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 13.9 66 13.1 68 10.8 67 11.8 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 12.3 64 12.5 66 10.6 66 11.5 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 10.7 63 11.6 65 10.4 65 11.2 68 8.2 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 8.4 59 9.0 61 9.5 64 9.8 64 7.6 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 6.5 55 6.9 57 7.4 58 7.7 61 7.2 64 5.7 62 5.1 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 49 4.8 52 5.3 53 5.5 55 6.0 58 6.8 60 5.5 59 4.7 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 45 3.3 47 3.6 48 3.9 51 4.6 55 5.4 57 5.3 56 4.3 61 3.7 65 3.2 60 3.2 66 2.6 70 2.1 140150 40 2.1 42 2.3 43 2.6 48 3.5 51 4.0 53 4.4 53 3.9 58 3.4 62 3.1 57 2.8 63 2.4 67 2.0 150160 44 2.4 47 2.9 49 3.1 50 3.1 55 3.3 58 2.9 55 2.6 60 2.3 64 2.0 160170 42 2.0 44 2.0 47 2.2 52 2.9 55 2.9 52 2.3 57 2.1 170180 49 1.9 51 2.4 49 1.8 54 2.0 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 48,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 14.6 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 14.3 71 13.5 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 13.5 69 12.8 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 12.7 68 12.1 70 10.8 68 10.8 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 11.8 66 11.4 68 10.6 67 10.4 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 10.7 65 10.7 67 10.3 66 10.0 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 8.4 61 9.0 63 9.3 62 8.9 66 7.0 68 5.1 66 5.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 6.2 58 6.9 59 7.4 60 7.7 63 6.4 65 4.9 64 5.4 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 52 4.6 54 5.1 56 5.5 57 5.8 60 6.1 62 4.8 61 4.9 66 4.0 69 3.3 64 3.7 70 2.9 74 2.2 130140 48 3.2 50 3.6 52 3.9 54 4.5 57 5.3 59 4.6 59 4.5 63 3.8 67 3.3 62 3.3 67 2.7 72 2.2 140150 44 2.1 46 2.3 47 2.6 50 3.2 54 4.0 56 4.4 56 3.9 61 3.5 64 3.1 59 3.1 65 2.5 69 2.1 150160 47 2.3 50 2.9 52 3.1 53 2.9 58 3.4 61 3.0 57 2.7 62 2.4 66 2.0 160170 48 2.0 50 2.0 55 2.7 58 2.9 54 2.2 60 2.2 170180 52 2.0 54 2.4 57 2.0 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

929292

100100

92

Boom length 43.3 ft to 170.6 ft

100100

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

20

Page 21: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 24,250 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 15.5 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 13.6 71 14.3 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 11.7 70 12.9 71 11.1 70 12.1 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 9.8 68 11.0 69 10.9 68 11.2 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 8.5 66 9.5 68 10.0 67 9.8 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 7.2 64 8.1 66 8.8 66 8.5 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 5.9 63 6.9 65 7.4 65 7.4 68 8.1 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 3.9 59 4.7 61 5.2 64 5.4 64 6.6 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 2.4 55 3.1 57 3.4 58 3.8 61 4.8 64 5.5 62 4.6 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 53 2.0 55 2.4 58 3.4 60 4.0 59 3.1 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 55 2.2 57 2.6 56 2.0 61 3.2 65 3.2 60 2.4 66 2.6 70 2.1 140150 58 2.1 62 2.9 63 2.4 67 2.0 150160 58 2.0 64 2.0 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 24,250 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 13.4 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 11.5 71 12.9 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 9.8 69 11.0 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 8.3 68 9.5 70 10.1 68 9.7 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 7.0 66 8.0 68 8.8 67 8.4 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 5.9 65 6.7 67 7.4 66 7.2 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 3.9 61 4.7 63 5.2 62 5.1 66 6.5 68 5.1 66 5.8 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 2.4 58 2.9 59 3.4 60 3.6 63 4.8 65 4.9 64 4.3 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 56 1.8 57 2.3 60 3.4 62 4.0 61 3.0 66 4.0 69 3.3 64 3.3 70 2.9 74 2.2 130140 57 1.9 59 2.6 63 3.2 67 3.3 62 2.2 67 2.7 72 2.2 140150 61 2.1 64 2.7 65 2.5 69 2.1 150160 66 2.0 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

92

Boom length 42.7 ft to 160.4 ft

929292

100

Boom length 43.3 ft to 170.6 ft

100100100

21

Page 22: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 19,180 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 16.9 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 16.5 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 14.2 73 14.9 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 12.1 71 13.4 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 10.3 70 11.4 71 11.0 70 11.7 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 8.6 68 9.6 69 10.5 68 10.0 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 7.1 66 8.2 68 9.1 67 8.6 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 5.8 64 6.9 66 7.7 66 7.3 69 8.3 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 4.8 63 5.7 65 6.4 65 6.2 68 7.6 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 2.9 59 3.7 61 4.1 64 4.4 64 5.6 67 5.9 64 5.1 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 55 2.2 57 2.6 58 2.9 61 3.8 64 4.7 62 3.6 67 4.2 71 3.4 65 3.8 71 3.1 75 2.3 120130 58 2.6 60 3.1 59 2.3 64 3.7 68 3.3 62 2.6 68 2.9 73 2.2 130140 57 2.1 61 2.4 65 3.1 66 2.6 70 2.1 140150 62 2.3 63 2.1 67 2.0 150160 64 2.0 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 19,180 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 13.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 12.0 72 13.2 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 10.0 71 11.3 73 11.2 71 10.7 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 8.4 69 9.5 71 10.5 69 9.8 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 7.0 68 8.0 70 9.1 68 8.5 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 5.8 66 6.8 68 7.5 67 7.2 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 4.8 65 5.7 67 6.2 66 6.0 69 7.3 72 5.3 69 6.5 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 2.9 61 3.7 63 4.1 62 4.1 66 5.4 68 5.1 66 4.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 58 2.2 59 2.4 60 2.6 63 3.8 65 4.6 64 3.4 69 4.4 72 3.5 66 3.6 72 3.2 76 2.4 120130 60 2.4 62 3.1 61 2.1 66 3.5 69 3.3 64 2.4 70 2.9 74 2.2 130140 63 2.4 67 3.2 67 2.6 72 2.2 140150 64 2.1 69 2.1 150160 66 1.9 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

929292

100100

92

Boom length 43.3 ft to 170.6 ft

100100

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

22

Page 23: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 0 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft

On outriggers, 360° working areaWorking Outrigger base 24.61 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 31.17 ft Fly jib 53.15 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 80 14.6 3540 78 17.0 81 17.0 79 14.6 4045 76 17.0 79 17.0 77 14.6 4550 75 16.7 78 16.7 77 12.3 76 14.6 79 14.6 78 10.9 5055 74 14.9 76 15.8 78 12.7 76 12.3 80 10.9 75 13.6 77 14.5 79 12.9 77 10.9 5560 73 11.8 75 14.0 77 12.3 75 12.1 79 10.9 74 11.6 76 13.8 78 12.5 76 10.8 79 9.7 6065 71 9.2 74 11.3 75 11.9 73 10.6 77 10.7 72 9.1 75 11.1 77 12.2 74 10.3 78 9.7 6570 70 7.2 73 9.0 74 10.0 72 8.8 76 10.3 79 7.1 71 7.1 74 8.9 76 10.1 73 8.6 77 9.4 7075 68 5.5 71 7.1 72 8.0 71 7.1 75 9.4 77 7.0 70 5.4 72 7.0 74 8.0 72 6.9 76 8.7 78 6.1 7580 67 4.0 70 5.5 71 6.4 70 5.6 74 8.0 76 6.8 69 3.9 71 5.5 73 6.3 71 5.4 75 7.7 77 5.9 8085 65 2.7 68 4.1 69 4.9 68 4.3 72 6.5 75 6.5 67 2.7 69 3.9 71 4.8 69 4.0 73 6.3 76 5.7 8590 66 2.9 68 3.6 67 3.2 71 5.2 74 6.1 68 2.8 70 3.6 68 3.0 72 5.1 75 5.7 9095 64 1.9 66 2.5 66 2.2 69 4.1 72 5.3 66 1.8 68 2.5 67 2.1 70 4.0 73 5.0 95

100 68 3.1 71 4.2 69 3.0 72 4.0 100110 67 2.3 68 2.2 110120 120130 130140 140150 150160 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

100

Boom length 42.7 ft to 160.4 ft Boom length 42.7 ft to 170.6 ft

92929292

100100100

23

Page 24: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 77,160 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 17.0 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 16.3 71 14.7 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 14.9 70 14.2 71 11.1 70 12.3 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 13.1 68 13.6 69 10.9 68 12.1 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 11.6 66 12.5 68 10.8 67 11.8 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 10.3 64 11.1 66 10.6 66 11.2 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 9.1 63 9.8 65 10.1 65 10.2 68 8.2 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 6.9 59 7.6 61 8.0 64 8.2 64 7.6 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 5.3 55 5.9 57 6.1 58 6.5 61 7.1 64 5.7 62 5.1 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 49 3.9 52 4.4 53 4.6 55 5.0 58 5.9 60 5.5 59 4.7 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 45 2.6 47 3.0 48 3.2 51 3.7 55 4.6 57 4.9 56 4.2 61 3.7 65 3.2 60 3.2 66 2.6 70 2.1 140150 42 1.9 43 2.1 48 2.7 51 3.4 53 3.7 53 3.4 58 3.4 62 3.1 57 2.8 63 2.4 67 2.0 150160 47 2.4 49 2.6 50 2.5 55 3.2 58 2.9 55 2.5 60 2.3 64 2.0 160170 52 2.5 55 2.8 52 2.0 57 2.1 170180 51 2.0 54 1.9 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 77,160 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 14.6 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 14.2 71 13.5 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 13.0 69 12.8 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 11.6 68 12.1 70 10.8 68 10.8 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 10.2 66 11.0 68 10.6 67 10.4 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 8.9 65 9.8 67 10.1 66 9.9 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 6.9 61 7.6 63 8.0 62 8.0 66 7.0 68 5.1 66 5.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 5.2 58 5.9 59 6.1 60 6.4 63 6.4 65 4.9 64 5.4 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 52 3.7 54 4.4 56 4.6 57 4.8 60 5.7 62 4.8 61 4.9 66 4.0 69 3.3 64 3.7 70 2.9 74 2.2 130140 48 2.6 50 3.0 52 3.2 54 3.7 57 4.4 59 4.6 59 4.2 63 3.8 67 3.3 62 3.3 67 2.7 72 2.2 140150 46 1.9 47 2.1 50 2.7 54 3.2 56 3.7 56 3.2 61 3.5 64 3.1 59 3.1 65 2.5 69 2.1 150160 50 2.3 52 2.6 53 2.3 58 3.2 61 3.0 57 2.5 62 2.4 66 2.0 160170 55 2.3 58 2.8 54 1.8 60 2.2 170180 54 2.0 57 2.0 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

100

92929292

Boom length 43.3 ft to 170.6 ft

100100100

24

Page 25: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 17.0 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 17.0 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 17.0 74 15.6 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 15.5 73 15.2 74 11.8 72 12.3 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 13.8 71 14.5 72 11.4 71 12.3 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 12.1 70 13.3 71 11.1 70 12.2 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 10.5 68 11.6 69 10.9 68 11.7 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 9.1 66 10.1 68 10.4 67 10.4 71 8.9 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 7.9 64 8.9 66 9.4 66 9.2 69 8.5 72 6.2 69 6.7 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 6.7 63 7.2 65 8.1 65 8.1 68 8.2 71 6.1 68 6.3 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 4.9 59 5.7 61 6.0 64 6.2 64 7.3 67 5.9 64 5.7 69 4.6 73 3.6 67 4.4 73 3.4 78 2.5 110120 53 3.4 55 4.0 57 4.3 58 4.6 61 5.7 64 5.7 62 5.0 67 4.2 71 3.4 65 3.9 71 3.1 75 2.3 120130 49 2.1 52 2.7 53 2.9 55 3.3 58 4.2 60 4.8 59 4.0 64 3.9 68 3.3 62 3.5 68 2.9 73 2.2 130140 51 2.3 55 3.0 57 3.5 56 2.9 61 3.7 65 3.2 60 3.0 66 2.6 70 2.1 140150 51 2.0 53 2.3 53 2.0 58 3.1 62 3.1 57 2.3 63 2.4 67 2.0 150160 55 2.1 58 2.6 60 2.3 64 2.0 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 63,490 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.6 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 14.6 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 14.6 74 14.4 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 13.6 72 14.0 74 11.7 72 10.9 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 12.0 71 13.5 73 11.3 71 10.9 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 10.5 69 11.6 71 11.1 69 10.9 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 9.1 68 10.1 70 10.4 68 10.0 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 7.9 66 8.8 68 9.4 67 9.0 70 7.8 73 5.5 70 6.8 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 6.7 65 7.6 67 8.1 66 7.9 69 7.4 72 5.3 69 6.6 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 4.9 61 5.7 63 6.0 62 6.0 66 7.0 68 5.1 66 5.9 71 4.7 75 3.6 68 4.6 74 3.5 78 2.5 110120 55 3.4 58 4.0 59 4.3 60 4.5 63 5.6 65 4.9 64 5.1 69 4.4 72 3.5 66 4.0 72 3.2 76 2.4 120130 52 2.1 54 2.6 56 2.9 57 3.2 60 4.2 62 4.6 61 3.8 66 4.0 69 3.3 64 3.7 70 2.9 74 2.2 130140 54 2.1 57 3.0 59 3.5 59 2.8 63 3.7 67 3.3 62 3.0 67 2.7 72 2.2 140150 54 2.0 56 2.3 56 1.8 61 3.0 64 3.1 59 2.1 65 2.5 69 2.1 150160 58 2.0 61 2.6 62 2.3 66 2.0 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

929292

100100

92

Boom length 43.3 ft to 170.6 ft

100100

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

25

Page 26: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

Counterweight 45,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 79 17.0 3540 78 17.0 81 17.0 4045 76 17.0 79 17.0 4550 75 17.0 78 16.7 77 12.3 78 7.7 5055 74 16.1 76 16.3 78 12.7 76 12.3 80 10.9 77 7.7 79 5.6 5560 73 14.4 75 15.9 77 12.3 75 12.3 79 10.9 76 7.7 82 7.0 78 5.6 6065 71 12.6 74 14.1 75 11.9 73 12.3 77 10.7 75 7.7 81 6.8 76 5.6 6570 70 10.9 73 12.3 74 11.8 72 12.2 76 10.3 79 7.1 74 7.7 80 6.4 75 5.6 7075 68 9.4 71 10.7 72 11.3 71 11.0 75 10.0 77 7.0 73 7.6 79 6.0 75 5.6 81 4.7 7580 67 8.1 70 9.4 71 10.3 70 9.2 74 9.6 76 6.8 72 7.4 78 5.8 74 5.6 80 4.5 8085 65 6.9 68 8.0 69 8.9 68 8.0 72 9.3 75 6.5 71 7.2 76 5.5 73 5.3 79 4.3 8590 64 5.9 66 6.8 68 7.6 67 7.0 71 8.6 74 6.3 70 7.0 75 5.3 79 3.9 72 5.2 78 4.0 9095 62 4.9 64 5.8 66 6.4 66 6.1 69 7.6 72 6.2 69 6.5 74 5.1 78 3.8 71 5.1 77 3.8 95100 61 3.9 63 4.8 65 5.4 65 5.2 68 6.5 71 6.1 68 5.8 73 4.9 77 3.7 70 4.9 76 3.7 81 2.6 100110 57 2.4 59 3.1 61 3.6 64 3.6 64 4.7 67 5.4 64 4.2 69 4.6 73 3.6 67 4.3 73 3.4 78 2.5 110120 57 1.9 58 2.4 61 3.3 64 3.9 62 2.9 67 4.1 71 3.4 65 3.1 71 3.1 75 2.3 120130 58 2.1 60 2.6 59 1.9 64 3.0 68 3.3 62 2.1 68 2.9 73 2.2 130140 61 2.0 65 2.9 66 2.5 70 2.1 140150 62 1.9 67 2.0 150160 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Counterweight 45,855 lbsLifting capacities in 1,000 lbs according per SAE J765 on fly jib 31.17 ft / 53.15 ft / 79.07 ft / 98.75 ft

On outriggers, 360° working areaWorking Outrigger base 16.40 ft WorkingRadius Radius

(ft) (ft)Fly jib 31.17 ft Fly jib 53.15 ft Fly jib 79.07 ft Fly jib 98.75 ft

offset offset offset offset

0° 20° 35° 0° 20° 35° 0° 20° 35° 0° 20° 35°° ° ° ° ° ° ° ° ° ° ° °∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠ ∠

35 80 14.6 3540 79 14.6 4045 77 14.6 4550 76 14.6 79 14.6 78 10.9 5055 75 14.6 77 14.6 79 12.9 77 10.9 78 7.3 79 5.1 5560 74 14.2 76 14.6 78 12.5 76 10.9 79 9.7 77 7.3 78 5.1 6065 72 12.2 75 14.6 77 12.2 74 10.9 78 9.7 76 7.3 77 5.1 6570 71 10.6 74 12.3 76 12.0 73 10.9 77 9.4 75 7.3 80 6.5 76 5.1 7075 70 9.2 72 10.4 74 11.4 72 10.1 76 9.0 78 6.1 74 7.3 79 6.1 76 5.1 82 4.8 7580 69 7.9 71 9.0 73 10.3 71 8.7 75 8.6 77 5.9 73 7.2 78 5.9 75 5.1 81 4.6 8085 67 6.7 69 7.8 71 8.7 69 7.6 73 8.3 76 5.7 72 7.1 77 5.7 73 5.1 80 4.3 8590 66 5.7 68 6.8 70 7.5 68 6.7 72 8.1 75 5.7 71 7.0 76 5.4 72 5.0 79 4.1 9095 64 4.8 66 5.8 68 6.3 67 5.9 70 6.3 73 5.5 70 6.3 75 5.2 79 3.9 72 5.0 78 3.9 95100 63 3.9 65 4.8 67 5.2 66 5.0 69 6.3 72 5.3 69 5.3 74 5.0 78 3.8 71 4.9 77 3.7 81 2.6 100110 59 2.4 61 3.1 63 3.6 62 3.5 66 4.7 68 5.1 66 4.0 71 4.7 75 3.6 68 4.0 74 3.5 78 2.5 110120 59 1.9 60 2.2 63 3.3 65 3.9 64 2.7 69 4.2 72 3.5 66 2.9 72 3.2 76 2.4 120130 60 1.9 62 2.6 66 3.0 69 3.3 64 1.9 70 2.9 74 2.2 130140 63 2.0 67 2.9 67 2.5 72 2.2 140150 64 1.9 69 2.1 150160 160170 170180 180190 190200 200210 210220 220230 230240 240250 250

Telescoping sequence %Tel. 1 Tel. 1Tel. 2 Tel. 2Tel. 3 Tel. 3Tel. 4 Tel. 4

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

100100

92

Boom length 43.3 ft to 170.6 ft

100100

Operation and maintenance of this machine must be in compliance with the information provided in the "Operation and Maintenance Manual" supplied with this machine.

Boom length 42.7 ft to 160.4 ft

929292

26

Page 27: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

WARNING AND OPERATING INSTRUCTIONSFOR LIFTING CAPACITIESGENERAL 11. When making lifts at a load radius not shown, use the next

1. Total rated loadsshown on the TADANO load rating chart apply only longer radius to determine allowable capacity.to the machine as originally manufactured and normally equipped 12. Load per part line should not exceed 18,650 lbs. for the main by TADANO. Modifications to the machine or use of optional winch and for the auxiliary winch.equipment other than that specified can result in a reduction of 13. Loaded boom angles are approximate. The boom angle capacity. before loading should be greater to account for deflection.

2. Hydraulic cranes can be hazardous if improperly operated 14. The 42.7ft boom length capacities are based on the or maintained. Operation and maintenance of this machine must telescoping boom being fully retracted. If not fully retracted be in compliance with the information in the Operation and (less than 57.1ft boom length),use the total rated loads for Maintenance Manual supplied with the crane. If this manual is the 57.1ft boom length according to the telescoping sequence.missing, order replacement through the distributor. 15. Extension or retraction of the telescopic boom with loads may

3. The operator and other personnel associated with this machine be attempted within the limits of the TADANO LOAD RATING shall fully acquaint themselves with the latest applicable American CHART. The ability to telescope loads is limited by hydraulic National Standards Institute (ANSI) safety standards for cranes. pressure, boom angle, boom length, crane maintenance, etc.

16. When erecting or stowing the fly jib, be sure to retain it by SET UP hand or by other means to prevent its free movement.

1. Total rated loads shown on the TADANO load rating chart are the 17. Use the Anti-Two Block (OVERWIND CUTOUT) disable switch maximum allowable crane capacities. They are based on the machine when erecting or stowing the extendible fly jib and stowing the standing level on firm supporting surface under ideal job hook block. While the switch is pushed, the hoist will not stop, conditions. Depending on the nature of the supporting even when an overwind condition occurs.surface, it may be necessary to have structural supports under 18. The working radius specified in the TADANO LOAD RATING the outrigger floats to spread the load to a larger bearing surface. CHARTS for the fly jib apply only if the telescopic boom is

2. For on outrigger operation, outriggers shall be extended to the extended according to the TADANO LOAD RATING CHARTS.dimension according to the TADANO LOAD RATING CHART If one or more elements of the telescopic boom are retractedand secured by pins with tires free of supporting surface, before partially or completely, the specified boom angles will be operating crane. decisive in determining total rated lifting capacities.

3. Working on tires are travelling with load is not allowed. 19. When lifting a load by using the fly jib (auxiliary hoist) and4. The weight of the auxiliary winch with 3,100 lbs is taken into telescopic boom (main hoist) simultaneously, do the following:

account as a part of counterweight. Therefore the auxiliary A) Select the correct program for the load moment device in winch must be attached always at the superstructure for accordance with jib length, jib offset angle, counterweight crane operation. and outrigger base.

B) Before starting the operation, make sure that the weight of OPERATION the load is within the total rated load for the fly jib.

1. Total rated loads with outriggers fully extended do not exceed 20. Safe Load Indicator (S.L.I.)85% of the tipping loads. Total rated loads with outriggers half Before working with the telescopic boom or fly jib, extended are determined from the formula: make sure that the S.L.I. code is set according to the desired total rated load = (tipping load -0.1 tip reaction) / 1.25 telescoping sequence while the telescopic boom is completely

2. The crane's structural steelwork is in accordance with DIN 15018, retracted. A change of the telescoping sequence is not part 3. Design and construction of the crane comply with DIN permissible when the boom has been partially of fully extended. 15018, part 2 and with F.E.M. regulations. In order to change the S.L.I. code number, the boom must be

3. Total rated loads above the bold lines in the TADANO load rating fully retracted.chart are based on crane strength and those below the bold 21. Working with Single Toplines on crane stability. Operation with the single top is allowed with the main winch

4. Total rated loads include the weight of main hook block, auxiliary and the auxiliary winch. The maximum allowed capacity ishook ball, sling and other auxiliary lifting devices and all their weights limited by the selected S.L.I. code for main boom operation shall be subtracted from the listed capacities to obtain the net load according to existing counterweight and outrigger base at oneto be lifted. side and by the single line pull which is limited by hydraulic

pressure at the other side.For operations with the single top mounted, use the TADANO

11.0 LOAD RATING CHART for the telescopic boom in accordance 1 2 3 with existing counterweight and outrigger base to find the total

8.8 18.7 27.5 rated lifting capacity and also select the correct S.L.I. code for 440 the telescopic boom in accordance with the existing

counterweight and outrigger base. Find the total rated lifting 4 5 6 7 8 9 10 11 12 13 14 15 capacity based on boom length and working radius. From that

37.0 46.0 54.9 63.7 72.4 81.0 88.0 97.9 106.2 114.4 122.5 130.0 value, subtract 1,100 lbs and the weights of all lifting equipment used including hook block, sling and other auxiliary lifting devices. The result (<total rated lifting capacity> - <1,100 lbs> - <lifting

5. Total rated loads are based on freely suspended loads and make equipment>) is the total rated lifting capacity for a single top lift. no allowance for such factors as the effect of wind, sudden DEFINITIONSstopping of loads, supporting surface conditions, operating 1. Working Radius: Horizontal distance from a projection of the axisspeeds, side loads, etc. Side pull on boom or jib is extremely of rotation to supporting surface before loading to the centerdangerous. of the vertical hoist line or tackle with load applied.

6. Total rated loads do not account for wind on lifted load or boom. The deflection of the boom due to its deadweight and the rated Total rated loads and boom length shall be appropriately reduced, load are taken into account.when wind velocity is above 18 mph (26 ft/sec.) for main boom 2. Loaded Boom Angle: The angle between the boom baseoperation and above 11 mph (16 ft/sec.) for jib operation. section and the horizontal, after lifting the total rated load

7. Total rated loads at load radius shall not be exceeded. Do not at the working radius.tip the crane to determine allowable loads. 3. Working Area: Area measured in a circular arc about the

8. Do not operate at boom lengths beyond radii or boom angles centerline of rotation.where no capacities are shown. Crane may overturn without any 4. Freely Suspended Load: Load hanging free with no direct load on the hook. external force applied except by the hoist line.

9. Slewing of the superstructure is admissible only when the 5. Side Load: Horizontal side force applied to the lifted load crane is supported on half or fully extended outriggers. either on the ground or in the air.

10. The lifting capacity ratings specified in the TADANO load Safe Load Indicatorrating chart apply to the telescopic boom without fly jib The Safe Load Indicator is intended as an aid to the operator.fixed in transport position or working position. Under no condition should it be relied upon to replace of If the fly jib is secured to the telescopic boom in transport Load Rating Charts and Operating Instructions. position or working position, the lifting capacities of the Sole reliance upon the Safe Load Indicator Aids in place of good telescopic boom are reduced by the values specified below. operating practice can cause an accident. The operator must The weight of the fly jib(3,650 lbs) is detected in terms exercise caution to assure safety.of a load, and the load moment limiter will shut off earlier.

42.7 57.1 71.9 86.6 101.4 116.1 130.9 145.7 160.4 170.60.66 0.29 0.29 0.19 0.19 0.14 0.14 0.12 0.11 0.102.59 2.12 1.94 1.84 1.80 1.73 1.70 1.68 1.61 1.543.18 2.59 2.24 2.07 2.02 1.89 1.85 1.78 1.71 1.655.18 3.77 3.23 2.94 2.87 2.63 2.63 2.44 2.32 2.157.06 4.99 4.30 3.78 3.67 3.33 3.33 3.11 2.88 2.59

Hookball/ Hookblock(ton) 27.5

Load rating reduction (tons)

Jib status

No. of parts of lineMax. lifting capacity (ton)

138

2,650

88

1,765

79.1ft fly jib, mounted to the boom head

660

98.8ft fly jib,mounted to the boom head

Boom length (ft)

31.2ft/53.1ft fly jib,mounted in transport position31.2ft fly jib,mounted to the boom head53.1ft fly jib,mounted to the boom head

Weight (lbs.)69.5

1,320

27

Page 28: ATF110G-5 -   · PDF fileMax. gradeability : 61 % The gradeability is based on theoretical values and depends on ground conditions and the coefficient of friction

ATF110G-5 Axle weight distribution chart1) Normal traveling condition

Axle 1 Axle 2 Axle 3Base machine with 16.00R25 tires, no counterweight, no fuel , no driver 22,978 22,050Add: 1. 11.0 ton hook ball (in carrier storage) 73 73 0

2. 27.5 ton hook block in front 592 592 03. 69.4 ton hook block in front 1,195 1,195 04. 88.0 ton hook block in front 1,618 1,618 05. Boom extension (31.2ft/53.1ft) stored on main boom 2,277 2,277 06. Auxiliary winch with cable -949 -949 07. Auxiliary boom point sheave (single top) 185 185 08. Drive 10x8 147 147 09. Drive/steer and outrigger control from crane cab 37 37 0

10. Air conditioning in carrier cab 77 77 011. Air conditioning in crane cab -12 -12 012. Tool box at rear -39 -39 013. Additional Hydraulic oil cooler -7 -7 0 51 5114. 20.5R25 tires in lieu of 16:00R25 207 207 20715. Air & electrical circuits to rear for boom dolly -4 -4 016. Free swing & boom hoist circuit for boom dolly 4 4 0

2) Traveling with boom dollyAxle 1 Axle 2 Axle 3

Base machine with 16.00R25 tires, no counterweight, no fuel, no driver 16916 17237Add: 1. 11.0 ton hook ball (in carrier storage) 73 73 0

2. 27.5 ton hook block at boom head 0 0 03. 69.4 ton hook block at boom head 0 0 04. 88.0 ton hook block at boom head 0 0 05. Boom extension (31.2ft/53.1ft) stored on main boom -1,680 -1,680 06. Auxiliary winch with cable 1,455 1,455 07. Auxiliary boom point sheave (single top) 0 0 08. Drive 10x8 147 147 09. Drive/steer and outrigger control from crane cab -37 -37 0

10. Air conditioning in carrier cab 77 77 011. Air conditioning in crane cab 29 29 012. Tool box at rear -39 -39 013. Additional Hydraulic oil cooler 22 22 0 23 23 014. 20.5R25 tires in lieu of 16:00R25 207 207 20715. Dolly brackets at boom 0 0 016. Towing attachement(190 kN) 0 0 017. Air & electrical circuits to rear for boom dolly -3 -3 018. Free swing & boom hoist circuit for boom dolly 7 7 019. 2 Axle Dolly 0 0 020. 3 Axle Dolly 0 0 0

TADANO AMERICA CORPORATION333 NORTHPARK CENTRAL DR, SUITE ZHOUSTON, TEXAS 77073 U.S.A.PHONE: (281) 869-0030 EXT.315FAX: (281) 869-0040Web site: www.tadanoamerica.comE-mail: [email protected]

Form No. TAC-ATF110G-5-050224

0 0 6,000

181

62 24 24 0

154 116 116

181 0 0

93 10 10

198 99 99

154 116 116

298

9,000

141 0 0 141

9,000 0 0

24

6,000

0

00

0

Boom Dolly21768

0662

1,323

00

1,036 207 207

108 00

0

106 24 24

88

2 2

15 15

3,669 3,514 3,5143,109 100 100

1,323 0 0

441 148 148662 0 0

GVW Axle 4 Axle 5104,471 16,118 16,314 16,118

16207

-534

2,503

-23

-95

104,471441 148

-443

-261

1,764

22,213 18,517

-736 -736

27

108

1,036

106

2462

1627

88

65

GVW

1,323

Axle 5Axle 418,713

148

-534662 -261

-2365

207

2298 2-95

3,6693,109

-4432,503

181

1,764 0 0

0

93 83 83

1,764

-23 -23

8'4-3/4" 5'4-15/16" 5'11-4/16" 5'6-15/16"

54 1/2"8'4-3/4" 5'4-15/16" 5'11-4/16" 5'6-15/16" 16'2-7/8"

28