ASTTAR LED MINING LIGHT
Transcript of ASTTAR LED MINING LIGHT
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
2017V-Asttar-Explosion-proof Lamp
Content
Explosion-proof Lighting Series ............................................................................................................................... 2 1.KL4Ex/KL6Ex LED Miner’s Cap Lamp(for export) ............................................................................................ 2 2.KL4LM(A)LED Miner’s Cap lamp ........................................................................................................................ 3 3.KL6LM(A) Intrinsically Safe LED Informatized Miner’s Cap lamp ............................................................... 4 4.KLW5LM(A)LED Methane Alarm Miner’s Cap lamp ................................................................................ 5 5.KBJ-1 Calibration Device for Methane Alarm Miner’s Cap lamp............................................................. 6 6.KL1.2Ex LED Integrated Miner’s Cap lamp(for export) ................................................................................ 7 8.SDF-TZ-A Type Portable Explosion-proof Searchlight .................................................................................... 9 8. LED Miner Cap lamp Chargers ....................................................................................................................... 10 KZC1A Single Charger ............................................................................................................................................ 10 KZC10A Combined Charger ................................................................................................................................ 10 KZC80A Building block Charging Rack ............................................................................................................. 10 KZC100Z Intelligent Charging Rack .................................................................................................................... 10 9.DGS12/127L(C) LED Mine Flame-proof Laneway Lamp ............................................................................ 11 10.DGS18/127L(D) 、DGS24/127L(D)、DGS30/127L(D) Mine Flame-proof LED Laneway Lamp ...... 12 11.SDF-ZM-A Series LED Explosion-proof Lighting ............................................................................................ 13 13.SDF-ZM-C20[DGS20/127L(A)] Intrinsically Safe Type LED Explosion-proof Light ................................ 16 14.KL2.8LM(A) Intrinsically Safe Integrated Miner’s Cap Lamp .................................................................. 17
15.SDF-BZ-A type LED Explosion-proof Emergency Light .............................................................................. 19
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Explosion-proof Lighting Series
1.KL4Ex/KL6Ex LED Miner’s Cap Lamp(for export)
Patented Products
Atex approval Features It has the characteristics of high quality, super brightness and long lifetime. Equipped with built-in microcontroller, multiple safety protective circuit and intelligent charging
& discharging process ensure the safety and reliability. It can adapt to all kinds of charging device with wide charging input voltage. Special LED constant current driving circuit ensures the light intensity of illumination basically
remain unchanged after 11 hours’ lighting. It complies with the requirements of ATEX Explosion –proof Directive. Main specification Item Model KL4Ex KL6Ex Battery Lithium Manganate Rated Capacity 4Ah 6Ah Rated Voltage 3.7V Lighting time >15h >16h
Main lighting source
Operating current 0.22A 0.28A Max illumination (at 1m away from the lamp)
when lighting begins ≥4300lx ≥5000lx After lighting for 11h ≥4300lx ≥5000lx
Rated power for LED auxiliary lighting source 0.2W Life of cap lamp >2yrs Charging Voltage (6~8)V Charging time ≤8h ≤10h Explosion-proof type Ex ia I Ma Protection grade IP54 Dimensions of battery case 105×29×120mm Weight 0.65 kg Certification Item Model KL4Ex KL6Ex ATEX Certificate No. Baseefa09ATEX0205-Issue 2 Matching information Optional device KZC1A Single charger
KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack
Packaging information Item Model KL4Ex KL6Ex Carton size(Paper carton) 423×328×218mm Packing quantity 12 pcs Gross weight 10 kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
2.KL4LM(A)LED Miner’s Cap lamp
Features
It has the characteristics of high quality, super brightness and long lifetime. Equipped with built-in high-accuracy DC/DC circuit, It can adapt to all kinds of charging
device with wide charging input voltage. Highly integrated li-ion battery charging management and multiple protective circuit ensure
the safety and reliability. Special LED constant current driving circuit ensures the light intensity of illumination basically
remain unchanged after 11 hours’ lighting. Main specificaiton Item Specification Battery Type Lithium manganate Rated capacity 4Ah Rated voltage 3.7V Lighting time >16h
Main lighting source
Operating current 0.2A
Max.illumination(at 1m away from lamp)
when lighting begins ≥4000lx
After lighting for 11h ≥4000lx
Rated power for LED auxiliary lighting source 0.2W Life of cap lamp >2yrs Charging voltage (5~8)V Charging time <10h Explosion-proof type Exs I Protection grade IP54 Dimensions of battery case 71×40×110mm Weight 0.55kg Certification MA certificate No. MAG060045 KA certificate No. KAG060002 Explosion-proof certificate No. 320121367 Matching information Optional device KZC1A Single charger
KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack
Packaging information Carton size(Paper carton) 580×280×260mm Packing quantity 20pcs Gross weight 12.15kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
3.KL6LM(A) Intrinsically Safe LED Informatized Miner’s Cap lamp
Features It has the characteristics of high quality, super brightness and long lifetime. Built-in microcontroller and multiple safety protective circuit,intelligent management of
charging & discharging process ensure the safety and reliability. It can adapt to all kinds of charging device with wide charging input voltage. Special LED constant current driving circuit ensures the light intensity of illumination basically
remain unchanged after 11 hours’ lighting. The mode of lighting source includes high light, low light, Strobe and S.O.S. international rescue. Main specificaiton Item Specification Battery Lithium manganate Rated capacity 6Ah Rated voltage 3.7V Lighting time >18h Main lighting source
Rated current 0.3A Max.illumination(at 1m away from lamp)
When lighting begins ≥5200lx After lighting for 11h ≥4500lx
Display mode High light ≥5200lx Low light ≥1300lx Strobe 10Hz S.O.S. 3 short, 3 long, 3 short
Life of cap lamp >2yrs Charging voltage (6-8)V Charging time <10h Explosion-proof type Exia I Ma Protection grade IP 65 Dimensions of battery case 128×45×123mm Weight 0.7kg Certification MA certificate No. MAG140027 KA certificate No. KAG140002 Explosion-proof certificate No. 320141044 Matching information Optional device
KZC1A Single charger KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack KJ754-K Identification card
Packaging information Carton size(Paper carton) 423×328×218mm Packing quantity 12pcs Gross weight 10.2kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
4.KLW5LM(A)LED Methane Alarm Miner’s Cap lamp
Main Characteristics It has the characteristics of high quality, super brightness and long lifetime. Built-in
microcontroller and multiple safety protective circuit, intelligent management of charging & discharging process ensure the safety and reliability. It can adapt to all kinds of charging device with wide charging input voltage. LED constant current driving circuit ensures the light intensity of illumination basically remain unchanged after 11 hours’ lighting.
It has the functions of automatic fault detection, methane overrun alarm, and automatic position of fault point.
The intelligent micro-controller circuit is ingeniously combined with the methane gas detection circuit, equipped with our special calibration device, it is quick to calibrate and convenient to use.
Main specification Item Specification Battery Lithium Manganate Rated capacity 5Ah Rated voltage 3.7V Lighting time >15h Main lighting source
Operating current 0.2A Max illumination(at 1m away from lamp)
When lighting begins ≥2500lx After lighting for 11h ≥1500lx
Rated power of LED auxiliary lighting source 0.2W Carrier Catalytic component Operating voltage 2.5V
Operating current ≤95mA Life of cap lamp >2yrs Charging voltage (6~8)V Charging time <10h Life of Catalytic component ≥1yr Alarm point(factory setting) (1.00 ±0.10)%CH4
Protection grade IP54 Explosion-proof type Exs[ib]dI Dimensions of battery case 71×40×110 mm Weight 0.56kg Certification MA certificate No. MAG120062 KA certificate No. KAG120001 Explosion-proof certificate No. 320121368 Matching information Standard configuration KBJ-1 calibration device for alarm miner’s cap-lamp Optional device KZC1A Single charger
KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack
Packaging information Carton size(Paper carton) 580×280×260mm Packing quantity 20pcs Gross weight 12.15kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
5.KBJ-1 Calibration Device for Methane Alarm Miner’s Cap lamp
Features Supporting the use of our methane alarm miner’s cap lamp. Equipped with glass rotameter, it is convenient to adjust gas flow through air valve. Only need to press the calibration button once after powering on and putting through the gas,
the calibration of methane alarm miner’s cap lamp can be automatically completed within 1 minute.
Main specification Item Specification Input voltage AC220V/50Hz Dimensions 255×150×325mm Weight 5.1kg Packaging information Carton size(paper carton) 280×190×370mm Packing quantity 1pc Gross weight 5.3 kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
6.KL1.2Ex LED Integrated Miner’s Cap lamp(for export)
Features It has the characteristics of high quality, super brightness , long lifetime,cordless,small volume
and light weight. Built-in microcontroller and multiple safety protective circuit, intelligent management of
charging & discharging process ensure the safety and reliability. It can adapt to all kinds of charging device with wide charging input voltage. LED constant current driving mode ensures the light intensity of illumination basically remain
unchanged after 11 hours’ lighting. It complies with the requirements of ATEX explosion –proof directive. Main specificaiton Item Specification Battery Lithium manganate Rated capacity 1.2Ah Rated voltage 3.7V Lighting time >11h
Main lighting source
Operating current 0.1A Max illumination(at 1m away from lamp)
When lighting begins ≥2200lx After lighting for 11h ≥2000lx
Rated power of LED auxiliary lighting source 0.2W Life of cap lamp >2yrs Charging voltage (6~8)V Charging time ≤8h Explosion-proof type Ex ia I Ma Protection grade IP65 Dimensions Φ67×82×73mm Weight 0.2kg Certification ATEX Certificate No. Baseefa12ATEX0052-Issue 1 Matching information Optional device KZC1A Single charger
KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack
Packaging information Carton size(paper carton) Carton size(Paper carton) 423×328×218mm Packing quantity Packing quantity 24pcs Gross weight Gross weight 7.1 kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
7.KL1.2LM(A)LED Integrated Miner’s Cap lamp
Features It has the characteristics of high quality, super brightness , long lifetime,cordless,small volume
and light weight. Built-in microcontroller and multiple safety protective circuit, intelligent management of
charging & discharging process ensure the safety and reliability. It can adapt to all kinds of charging device with wide charging input voltage. LED constant current driving mode ensures the light intensity of illumination basically remain
unchanged after 11 hours’ lighting. Main specificaiton Item Specification Battery Lithium iron phosphate Rated capacity 1.2Ah Rated voltage 3.2V Lighting time >11h
Main lighting source
Operating current 0.1A Max illumination(at 1m away from lamp)
When lighting begins ≥2200 lx After lighting for 11h ≥2000 lx
Rated power of LED auxiliary lighting source 0.2W Life of cap lamp >2yrs Charging voltage (6~10)V Charging time ≤8h Explosion-proof type Exs I Protection grade IP54 Dimensions Φ67×82×73mm Weight 0.15kg Certification MA certificate No. MAG090059 KA certificate No. KAG090001 Explosion-proof certificate No. 320120279 Matching information Optional device KZC1A Single charger
KZC10A Combined charger KZC80A Building block Charging Rack KZC100Z Intelligent charging rack
Packaging information Carton size(paper carton) 580×280×260mm
Packing quantity 48pcs
Gross weight 9.6kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
8.SDF-TZ-A Type Portable Explosion-proof Searchlight
Features The product’s housing adopts high-strength aluminum die-casting. Equipped with built-in micro controller and multiple safety protection circuit, intelligent
management of charge-discharge process. It can be switched among five operating modes, such as bright light, working light, emergency
light, strobe and SOS. The product has the characteristics of battery power indication, magnetic base, high intensity,
anti-corrosion, waterproof and dustproof performance, impact resistance, and long service life. It is used as portable or fixed lighting in class I underground coal mine, and class ⅡA、ⅡB、ⅡC of T1-T6 temperature classification explosive gas atmosphere, and zone 21, zone 22 flammable dust atmosphere.
Main specification
Item Specification mine use Non mine use
Battery type Lithium manganate Rated capacity 2.8Ah 5Ah Rated voltage 14.8V
working time
Bright light mode >2.8h >5h Working light mode >7h >13h Emergency light mode >76h >135h
LED power 15W(bright light mode) Distance of bright light irradiation >100 m Radiation angle 60° Bright light illuminance
at 1m away from lamp >33000lx at 11m away from lamp >320lx
Color temperature 4500K~6000K, user-optional Service life of battery pack 500 times charge-discharge cycles, the battery pack is
l bl Charging time ≤5h ≤9h Protection grade IP66
Explosion proof type ExdI Mb Gaseous environment: Ex dⅡC T6 Gb
Dimensions 183×100×140mm
Weight 1.4kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Certification MA certificate No. /
KA certificate No. /
Explosion-proof certificate No. / Matching information Standard fittings KZC1D charger, straps
8. LED Miner Cap lamp Chargers
KZC1A Single Charger
KZC10A Combined Charger
KZC80A Building block Charging Rack
KZC100Z Intelligent Charging Rack
Main Characteristics 8.1 KZC1A Single Charger It has built-in switching power supply circuit and wide input voltage. Double color luminous tube indication ensures the charging status is clear at a glance. It is small in size,light in weight and convenient to use. 8.2 KZC10A Combined Charger It has built-in switching power supply circuit ,with wide input voltage. Double color luminous tube indication ensures the charging status is clear at a glance. 10 combination design, it is convenient to use. 8.3 KZC80A Building block Charging Rack It has built-in high power switching power supply circuit and wide input voltage. Double color luminous tube indication in each charging position ensures the charging status is clear at a glance. Charging rack adopts quality cold-rolled steel stamping molding, surface uses electrostatic spaying treatment, building block structure is convenient for assembly and transportion. 8.4 KZC100Z Intelligent Charging Rack This product is integrated with miner’s cap lamp charging & discharging and information management system. It adopts switching power supply and has wide voltage range. Each charging position is designed as cabinet type to accommodate self rescuer, miner’s cap lamp or other portable instruments. Each charging position adopts LCD display, can display the charging status,miner’s information,alarm status etc. Charging position can be equipped with coded lock, and provide multiple alarm function like remote unlock, voice prompt etc.
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Main specificaiton and packaging information
Item Model KZC1A KZC10A KZC80A KZC100Z Single
charger combined
charger Building block charging rack Intelligent charging rack
Input voltage AC110~250V/ 50Hz
Output voltage DC(7±0.5)V Charging capacity 1pcs 10pcs 80pcs 100pcs
Dimensions 110×68×52 mm
500×310×100 mm 1160×380×1750 mm 2200×620×1840
mm
Carton size(paper carton)
540×340×150 mm
540×340×150 mm
1230×430×435 mm
(Frame)
1230×430×485mm
(Base)
2260×680×1900 mm
Packing quantity 20pcs 1 pcs 4 pcs 1 pcs 1 pcs
Gross weight 7kg 6.6kg 26 kg×4(layers) 35 kg 200kg
9.DGS12/127L(C) LED Mine Flame-proof Laneway Lamp
Main characteristics The lamp housing adopts die-casting aluminium technology, surface adopts electrostatic spraying. It has built-in LED driving circuit and wide voltage design, with high quality, super brightness and long lifetime. Main specificaiton Item Specification Operating voltage AC 127V Rated power 12W illumination (at 3m away from lamp) >30lx Protection grade IP 65 Explosion-proof type ExdI Mb Dimensions 720×220×110mm Weight 3.2kg Certification MA certificate No. MAH120228 KA certificate No. KAH120022 Explosion-proof certificate No. 320121356 Packaging information Carton size(Paper carton) 760×515×370mm Packing quantity 4pcs Gross weight 16.7kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
10.DGS18/127L(D) 、 DGS24/127L(D) 、 DGS30/127L(D) Mine Flame-proof LED Laneway Lamp
Main characteristics The lamp housing adopts aluminum alloy material for aviation, surface is treated by anodic oxidation, with high efficiency of heat dissipation. It has the characteristics of wide range voltage design, high quality, super brightness and long lifetime. Main specificaiton
Item Model DGS18/127L(D) DGS24/127L(D) DGS30/127L(D)
Operating voltage AC 127V Rated power 18W 24W 30W illumination(at 3m away from lamp) >80lx >120lx >150lx Protection grade IP65 Explosion-proof type ExdI Mb Dimensions 220×150×180mm Weight 2.1 kg Certification Item Model DGS18/127L(D) DGS24/127L(D) DGS30/127L(D) MA certificate No. MAH120226 MAH120227 MAH120225 KA certificate No. KAH120021 KAH120023 KAH120024 Explosion-proof certificate No. 320121357 320121357 320121357 Packaging information Item Model DGS18/127L(D) DGS24/127L(D) DGS30/127L(D) Carton size(Paper carton) 735×375×265mm Packing quantity 6pcs Gross weight 14.8 kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
11.SDF-ZM-A Series LED Explosion-proof Lighting
Application This product is applicable to explosive gas environment of ⅡA、ⅡB、ⅡC type T1~T6 temperature classification, and zone 21, zone 22 combustible dust environment, which can be used as lighting in petrochemical, oil refining, oil exploitation, off-shore oil platform, oil tanker, place with dust and some other dangerous places. Main characteristics The shell adopts high quality aluminum die-casting, surface of high pressure electrostatic
spraying, has good corrosion resistance, exposed fastener adopts 304 stainless steel materials, and product can work in corrosive environment for a long time.
Equipped with high-intensity tempered glass, and the product has good impact resistance. Connecting line cavity, power cavity and light cavity adopt three cavity separating structure,
which reduces the temperature of power cavity and light cavity efficiently to ensure long service life of lighting.
Cable entry device and the lamp body adopt special structure design, the installation and maintenance is easy, fast and safe.
Main specification
Item Specification
Type I Type II Type III (W)Rated power 20 30 40 50 60 70 80 90 100 110 120 Operating voltage AC(176-264) V Power factor >0.9 >0.95
Rated luminous flux(lm) 1600 2400 3200 4500 5400 6300 7600 8550 9500 10450 11400
Protection grade IP65 Corrosion-proof grade WF2 Inlet thread G3/4 Outside diameter of cable (φ10~φ15) mm
Service life 50000 h Color temperature (4500~6000 )K, user-optional CRI >70 Explosion-proof type (gaseous environment):Ex d IIC T6 Gb (dust environment):Ex tD A21 IP65 Dimensions φ220×220 mm φ300×220 mm φ450×270 mm Weight 3.25 kg 5.3 kg 13 kg
Certification(Certificate in processing) Item Model Type I Type II Type III MA certificate No. / / / KA certificate No. / / / Explosion-proof certificate No. / / /
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Matching information
Optional device Explosion-proof connecting box, explosion-proof pipe joint, installing support
Packaging information Item Model Type I Type II Type III
Carton size(paper carton)(mm) 460×460×230mm 345×345×265mm 495×495×310mm Packing quantity 4 pcs 1 pcs 1 pcs Gross weight 14 kg 6.7 kg 15 kg Installation method
Ceiling type Suspender type
(wall type) 30° (wall type) 90°
(lamp-post) 90° (lamp-post) 25°
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
12.SDF-ZM-B SDF-ZM-A Series LED Explosion-proof Lighting
Features The product’s shell adopts high quality aluminum die-casting. It’s applicable to classⅡA、ⅡBexplosive gas atmosphere of T1~T6 temperature classification,
and zone 21, zone 22 flammable dust atmosphere. It is used as fixed floodlighting in dangerous environment, such as chemical engineering, oil
refining, oil exploitation, offshore oil platform, oil tanker and dust atmosphere. The product has the characteristics of high strength, anti-corrosion, waterproof and
dustproofperformance, impact resistance, long service life, convenient installation, and convenient maintenance.
Main specification
Item Specification Type I Type II Type III
Rated power 20W 30W 40W 50W 60W 70W 80W 90W 100W 110W 120W Operating voltage AC(176-264)V Power factor >0.9 >0.95 Rated luminous flux lms 1600 2400 3200 4500 5400 6300 7600 8550 9500 10450 11400
Protection grade IP65 Corrosion-proof grade WF2 Inlet thread G3/4 Outer diameter of cable φ10~φ15 mm
Service life 50000h Color temperature (4500~6000)K, User-optional CRI >70 Explosion-proof sign Gaseous environment:Ex d IIB T6 Gb Dust environment:Ex tD A21 IP65 T80℃
Dimensions 300×180×220mm 300×300×220mm 400×300×250mm
Weight 4.5kg 6.8 kg 10.0 kg Certification Item Model Type I Type II Type III
Explosion-proof certificate No. / / / Matching information
Optional device Explosion-proof connecting box, explosion-proof pipe joint, installing support
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
13.SDF-ZM-C20[DGS20/127L(A)] Intrinsically Safe Type LED Explosion-proof Light
Features The product’s shell adopts high quality aluminum alloy. Equipped with built-in casting and
intrinsically safe type driving power, it has high explosion-proof performance. It is applicable to class I underground coal mine and ⅡA、ⅡB、ⅡC explosive gas atmosphere of
T1~T6 temperature classification, and zone 21, zone 22 flammable dust atmosphere, and used as fixed type lighting.
The product has the characteristics of high strength, anti-corrosion, waterproof and dustproof performance, impact resistance, long service life, convenient installation, and convenient maintenance.
Main Specification
Item Specification Rated power 20 W Operating voltage AC (100~264)V Power factor >0.9 Rated luminous flux 2000 lm Protection grade IP65 Corrosion-proof grade WF1 AC outgoing line 3×1mm2 rubber cable, length of 2m Service life 50000 h Color temperature (4500-6000)K, user-optional CRI >70
Explosion-proof sign
Mine environment Ex[ib]mb I Mb Gaseous environment Ex[ib]mb ⅡC T6 Gb
Dust environment Ex tD A21 IP65 T80℃ Dimensions 705×87×94mm Weight 3.2 kg Certification MA certificate No. /
KA certificate No. /
Explosion-proof certificate No. / Matching information Standard fittings Explosion proof terminal box, installing support Optional device Rings installation component
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Installation method
Rings installation
Side wall installation of support Top installation of support
14.KL2.8LM(A) Intrinsically Safe Integrated Miner’s Cap Lamp
Application The product adopts intrinsically safe design, which meets the requirements of ATEX explosion-proof directive of EU. It is applicable to Class I underground coal mine and classⅡA、ⅡB、ⅡC explosive gas atmosphere of T1~T6 temperature classification, and zone 21, zone22 flammable dust atmosphere, and used as portable lighting. Main characteristics LED constant current driving mode, it ensures the illuminance keep the same during the lighting. Equipped with built-in micro controller and multiple safety protection circuit, with intelligent
management of charge-discharge process, it is safe and reliable. It is dual light source design, which can be one-key switched in five modes: main light bright
light, main light low light, auxiliary light, strobe and SOS. It has the characteristics of battery power indication, freely adjusting the angle of lamp head,
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
and various ways of wearing. Main specification Item Specification
Battery type Lithium manganate
Rated capacity 2.8Ah
Rated voltage 3.7V
Lighting time >14h
Main light source
Operating current 0.2A
Maximum illuminance( at 1m away from lamp)
When lighting begins ≥4000lx After lighting for 11h ≥4000lx
Rated power of LED auxiliary lighting source 0.2W
Life of cap lamp >2yrs
charging time (6~8)h
Explosion proof type
mine environment Ex ib I Mb Gaseous environment Ex ib ⅡC T6 Gb
Dust environment Ex tD A21 IP65 T80℃
Protection grade IP65
Dimensions 84×68×71mm
Weight 0.2kg
Certification MA certificate No. /
KA certificate No. /
Explosion-proof certificate No. / Matching information Standard fittings KZC1C charger, headband Way of wearing
Hat hook wearing type headband wearing type
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
15.SDF-BZ-A type LED Explosion-proof Emergency Light
Application
This product is applicable to explosive gas environment of ⅡA、ⅡB、ⅡC type T1~T6 temperature classification, and zone 21, zone 22 combustible dust environment, which can be used as emergency exit prompt or evacuation marks in petrochemical, oil refining, oil exploitation, off-shore oil platform, oil tanker, place with dust and other dangerous places. Main characteristics The shell adopts high quality aluminum die-casting, surface of high pressure electrostatic
spraying, which has good corrosion resistance, exposed fastener adopts 304 stainless steel material, and the product can work in corrosive environment for a long time.
Equipped with high-intensity tempered glass, so the product has good impact resistance Guidance sign content can be chosen by users, or be customized. Built-in high-performance lithium-ion battery, it can automatically charge under the condition
of normal power supply, and switch to battery power in the case of power failure. Main specification Item Specification Rated power 2W Operating voltage AC(176-264)V Emergency power supply Lithium battery Emergency time ≥2h Protection grade IP64 Corrosion-proof Grade WF2 Inlet thread G1/2 Outside diameter of cable (φ8~φ12) mm Service life 50000 h
Explosion-proof type gaseous environment Ex d IIB T6 Gb
dust environment Ex tD A21 IP64 T80℃
Dimensions 305×270×79 mm Weight 3.7 kg Certification(Certificates in processing) MA certificate No. / KA certificate No. / Explosion-proof certificate No. / Matching information Optional device Installing support Packaging information Carton size(paper carton) 320×355×305mm Packing quantity 4pcs Gross weight 16.5kg
Asttar Group | www.asttar.com/staren/ [email protected] Contact: Jack Tien Tel: +86.029.8611.3366 Ext633
Optional guidance signs
A Type B Type C Type
D Type E Type F Type
J Type K Type L Type
M Type N Type O Type
Installation method
Suspender type installation Ceiling type installation Wall type installation