Assembly / Manufacturing
2
in accordance with Safety Standard KTA 1401 l Licensed under § 15 of the German Radiation Protection Ordinance l Licensed to supply temporary workers under German law according to §1 AÜG l Certified specialist firm pursuant to § 19 l of the German Federal Water Act (WHG) l Approval for Asbestos work according to § 1 Abs. 3 in conjunction with appendix III Hazardous Substances Ordinance l Ability Certificate (�Gro�er �ignungs� (�Gro�er �ignungs� nachweis“) according to �I 1��00� according to �I 1��00� 7:2002�09 class � Assembly / Manufacturing Our service: l Planning l �esign l Manufacturing l Assembly l Commissioning l Maintenance l �valuation (pre�test reports etc) l �ocumentation l Quality assurance Our qualifications: l Technicians l Certified welders l Master craftsmen l �ngineers l �lectricians We use our own work shop to manufacture components, steel structures, special ma� chines and pipelines to our customers‘ speci� fications. Our quality assurance department prepares and carries out acceptance procedures to� gether with the customer or the external evaluator. Certificates & Licences l Occupational health and safety certifica� tion according to OHSAS 1�001:1999 l Quality management systems certificate according to ISO 9001:2000 l �nvironmental management certification according to ISO 14001:2004 l Approval certificate for Quality Assurance
Transcript of Assembly / Manufacturing
in accordance with Safety Standard KTA 1401
l Licensed under § 15 of the German Radiation Protection Ordinance
l Licensed to supply temporary workers under German law according to §1 AÜG
l Certified specialist firm pursuant to § 19 l of the German Federal Water Act (WHG)
l Approval for Asbestos work according to § 1 Abs. 3 in conjunction with appendix III Hazardous Substances Ordinance
l Ability Certificate (�Gro�er �ignungs�(�Gro�er �ignungs�nachweis“) according to �I�� 1��00� according to �I�� 1��00�7:2002�09 class �
Assembly / Manufacturing
Our service:l Planning l �esign l Manufacturing l Assembly l Commissioning l Maintenance l �valuation (pre�test reports etc) l �ocumentation l Quality assurance
Our qualifications:l Techniciansl Certified weldersl Master craftsmenl �ngineersl �lectricians
We use our own work shop to manufacture components, steel structures, special ma�chines and pipelines to our customers‘ speci�fications.Our quality assurance department prepares and carries out acceptance procedures to�gether with the customer or the external evaluator.
Certificates & Licencesl Occupational health and safety certifica�
tion according to OHSAS 1�001:1999 l Quality management systems certificate
according to ISO 9001:2000 l �nvironmental management certification
according to ISO 14001:2004 l Approval certificate for Quality Assurance
ternal medium pipeline for HAWC of the Karlsruhe Vitrification Plant
l 64 containers and devices for the process equipment of the Karlsruhe Vitrification Plant (volumes of 0.03 m3 to 5.5 m3) including mountings
l Bus�bars to carry electric power into the building of the Karlsruhe Vitrification Plant
GNSl Shield container (1) for ��PP Würgassen
(approx. 23 Mg)
Westinghousel Shield containers (5) for the dismantling
of the compact sodium�cooled nuclear reactor (each approx. 23 Mg)
l �nclosure with stainless steel liner for dismantling the reactor vessel in the compact sodium�cooled nuclear reactor with sliding doors, lead glass windows, manipulators, transport vehicles etc. (ap�prox. �0 Mg steel structure and approx. 450 Mg shield).
NPP Obrigheiml Sludge coolers (2) l Heater
HMI-Berlinl Vacuum chamber (diam. 2,4 m, length
13,5 m, weight 11,5 Mg)
Tresch + Kieliger (CH)l Manufacture of various pressure vessels
FZK-KATRINl Coatings and floor tanks
Studsvik GmbH & Co. KGKarlsruher Str. 20 · ��75179 Pforzheim, G�RMA��YPhone: +49 72 31 5 �6 95�01Fax: +49 72 31 5 �6 95�13��mail: [email protected] · www.studsvik.de
References (extract):
Areva NPl Manufacture and assembly of recombiner
mountings for the ��PP’s Grafenrheinfeld, Isar II, ��eckarwestheim I and ��eckarwest�heim II
l Manufacture of recombiner mountings for ��PP TRILLO, Spain
l Steel platforms for the ventilating system at ��PP ��eckarwestheim II
l Repair of the pond lining at ��PP ��eckar�westheim ll nuclear power plant
l �xtension of steel platform with access ladder for the ventilation system in the ��PP Philippsburg
l Repair of the pond lining in the ��PP �msland
Siempelkamp Nukleartechnikl Manufacture of a heavy�duty working platform for dismantling the Merlin
research reactor at the Jülich ��uclear Research Centre (approx.40 Mg)
Karlsruhe Research Centre Multi-purpose Research Reactor (MZFR) l Manufacture of rail transport systems l Steel frameworks for shields l Heavy�duty traverse systems for the
handling and dismantling of large�scale components in the multi�purpose research reactor
Central Decontamination Department (HDB)l Various shield frameworks with sliding
shield plates for dismantling components l �xtension 100 Mg – crane system l Steel framework for partition wall in the
MAW evaporation facility with pipe and cable duct
Institute for Transuranium Elementsl Manufacture of a neutron shield
KNTCompact sodium�cooled nuclear reactor (K��K)l Modification of the washing facility for
the removal of sodium residues from dis�mantled parts of the reactor vessel in the compact sodium�cooled nuclear reactor, with shielding lid and steel platform for depositing the containers (approx. 37 Mg)
NUKEMKarlsruhe Vitrification Plant (V�K)l HAWC connection , with shield and in�
ALL I�� O���
�ecomissioning
�econtamination
Chemistry Service
�ngineering
Manufacturing
Free Release Measurement
Health Physics
Incineration
Metal Melting
Metal Recycling
Waste Certification
Waste Management
