Thank you for choosing our Plasma/LCD TV Stand, this stand was designed to mount flat panel televisions to a floor stand, oweighting up to 80kgs. It allows you to swivel your new television left and right 30 .

Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a

qualified contractor. Check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper

installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this

manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.

Note: We makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not

included please consult your local hardware store.

Required Tools: Phillips screw driver.

Assembly Instructions for Plasma/LCD TV Stand

Supplied Parts

No. Picture Description Quantity

1 2

5

6

7

1

2

3Bottom Aluminum Support

Middle Aluminum Support

Middle Aluminum Support

With Cable Cover Slot

3 1Top Long Aluminum Support

With Cable Cover Slot

Large Safety Glass Shelf

1

8 3Plastic Cable Cover

No. Picture Description Quantity

10

12

13A

14

15

16

17

9

11

Aluminum Support Cover

Plastic Support Cover

3

6

Plastic Feet 3

Connect Metal Pipe-Long

Connect Metal Pipe-Middle

2

4

Metal Pipe Screw

Connect Piece

Top Plastic Support Cover 1

Top Glass Shelf Aluminum Head 4

8

1

2

13B Connect Metal Pipe-Short 2

No. Picture Description Quantity

20 1

22

23

24

25

26

27

4

18

19 6

21 2

M5x12 Bolt

M5x30 Bolt

M6x12 Bolt

M6x35 Bolt

M8x16 Bolt

M8x40 Bolt

4

4

4

4

4

Monitor Bracket

Plate

Nylon Wheel

Wheel Axis 6

3

No. Picture Description Quantity

30

28

29

4

31

M4/M5 Spacer

M6/M8 Spacer

M4/M5 Washer

M6/M8 Washer

4

8

4

4

Step 1

16

9

14

6

13A

10

1

5

8

Step 2

711

1518,19

13B

13A

5

Step 3

Step 4

4

8

12

1715

20

Step 5: Mounting Monitor Brackets to a television with a Flat Back

First, determine the diameter of the Bolt(22,24,26) your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter and resistance, pls stop immediately! Once you have determined the correct diameter, see the appropriate diagram below. You will thread the Bolt through the appropriate Washer(30,31), the Monitor Bracket(21), and finally into the TV. Make sure the Monitor Brackets are vertically centered and level with each other.

Diagram 1

M4 Diameter Bolt(have not supplied)

30

21

M6 Diameter Bolt

31

M8 Diameter Bolt

26

31

21

M5 Diameter Bolt

22

30

21

24

21

7

Step 6: Mounting Monitor Brackets to a television with a curved back, recessed threaded inserts or any other obstruction.

First, determine the diameter of the Bolt(23,25,27) your TV requires by hand threading them into the threaded insert on the back of the TV. If you encounter and resistance, pls stop immediately! Once you have determined the correct diameter, see the appropriate diagram below. You will thread the Bolt through the Washer(30,31), the Monitor Bracket(21),a spacer(28,29) and finally into the TV. For the M4 or M5 diameter bolt, you will need another M4/M5 Washer between the Monitor Bracket and the Spacer. Make sure the Monitor Brackets are vertically centered and level with each other.

Diagram 2

M6 Diameter Bolt

M8 Diameter BoltM5 Diameter Bolt

30

213028

30

23

2130

28

31

27

2129

31

25

2129

M4 Diameter Bolt(have not supplied)

8

9

Step 7: Mounting the flat panel television to the plate.

Warning: Some televisions may require 2 people to lift! We are not responsible for personal injury or product damage.

First choose the right vertical height you want, then hook the Monitor Brackets(21) over the top of the Plate(20) as shown in the diagram. Finally fix the brackets in the position by two screws.