1Eurotramp - Trampoline Kurt Hack GmbH

Minitramp 112(Art.-No. 50000; 50010; 50018; 50500 ; 50510; 50600 ; 50700)

Minitramp 125(Art.-No. 60000; 60010; 60500; 60510)

Minitramp Open-End(Art.-No. 45300; 45500; 45600)

Teamgym(Art.-No. 60020; 60024)

Assembly instructions for Eurotramp - Minitramps

2Eurotramp - Trampoline Kurt Hack GmbH

3

1

32

1 2

• To fold out the feet, place the trampoline vertically so that

both feet are free to move. Move the feet to the desired

position (Figure 1).

• The telescopic supports are each kept in tension by a

steel spring. By pulling the supports, they lock into the

respective sockets on the frame and the foot. (Figure 2

and 3).

• The dismount is done in the reverse order.

• To fold out the feet, place the trampoline vertically so that

both feet are free to move. Move the feet to the desired

position (Figure 1 and 2).

• The feet are being locked, by inserting the black bolts,

pulling them through the predrilled aperture in the flat bar

(Figure 3).

• The dismount is done in the reverse order.

The height of the trampoline can be adjusted with the star grip.

The height of the trampoline can be adjusted with the knob bolt.

Assembly instructions for model types Minitramp 112 + 125

Assembly instructions for model types Minitramp Open-End

3Eurotramp - Trampoline Kurt Hack GmbH

3

1

2

• To fold out the feet, place the trampoline vertically so that

feet both are free to move (Figure 1).

• Both feet are being locked, by inserting the black bolts,

pulling them through the predrilled aperture in the flat bar

(Figure 2 and 3).

• The dismount is done in the reverse order.

The height of the trampoline can be adjusted with the star grip.

Assembly instructions for model types Teamgym

If you have any questions, contact us any time:

Eurotramp Trampoline - Kurt Hack GmbH Zeller Straße 17/1 73235 Weilheim Tel. +49 (0)7023 - 9495-0 | Fax +49 (0)7023 - 9495-10 welcome@eurotramp.com | www.eurotramp.com

Assembly instructions fo Bumper on Minitramp Teamgym

Attention: Buying the Bumper is optional.

• The bumper is attached between the Minitramp frame and

the frame pad cover using the Velcro strip.

1