REICHHOLDreichhold.com/brochures/coatings/WEB-Reichhold... · primers, asphalt and concrete...

REICHHOLD Coating Resins Catalog

Alkyds Water-borne (Latex) 2 - 3

Alkyds Water Reducible 4 - 7

Alkyds Solvent-borne 8 - 19

Oils 20 - 25

Polyesters 26 - 27

Solvent-borne Urethanes 28 - 29

Moisture Cure Urethanes 30 - 31

Water-borne Urethanes 32 - 35

Polyols for 2K Urethanes 36 - 37

Epoxy Resins 38 - 41

Epoxy Curing Agents 42 - 45

2K Non-Isocyanate Resin Systems 46 - 47

Powder Resins 48 - 51

Acrylics 52 - 55

Graphic Arts Resins 56 - 61

Table of ConTenTs

32

51 W/G2 230 6 - 10 ProprietaryBeckosol AQ® 520 91888 8.7Epoxy modified; wet look sealer for concrete and masonry products

10050 6 - 10W PropiertaryWood wiping stain vehicle with improved open time

Beckosol AQ® 102 91879 8.5

Fast cure; primers, semi-gloss and flats

55 W 800 9 - 11 SoyaBeckosol AQ® 205 91827 8.8

alkyds WaTer-borne (laTex)

Long oiL

medium oiL

Product % SolidS Solvent oil tyPe commentSviScoSity(cPS)

Acid vAlue(SolidS)

Productcode

denSity(lbS/GAl)

modiFied

50055 9 - 11W Soya Exterior and interior wood stainsBeckosol AQ® 101 91825 8.8

General purpose for gloss, semi-gloss, wood stains

55 W 600 9 - 11 SoyaBeckosol AQ® 201 91806 8.8

Fast cure; very high gloss for trim; suitable for lower gloss systems

55 W 800 9 - 11 OxidizingBeckosol AQ® 206 91854 8.9

CHAin-SToPPed

61 W 1000 4 - 6 SoyaBeckosol AQ® 510 91972 8.8Acrylic modified; highest solids; primers, asphalt and concrete sealers, architectural paints

Beckosol AQ® 210 91855 55 W 8.9 500 7 - 9 Soya Metal primers

54

Oxidizing70 36 - 408.70Economical with good corrosion resistance

8691481Kelsol® 3941-B2G2-70 B2G2 Z6+

Oxidizing75 35 - 398.80 Excellent exterior durability6515139Kelsol® 3961-B2G-75B2/G4(50/50)

Z5 - Z6

Oxidizing70 38 - 428.85Economical with excellent hot hardness

9491153Kelsol® 3966-B2G-70B2/G4(50/50)

Z6±

Oxidizing70 36 - 408.83 Good performance and value8591463Kelsol® 3969-G2-70 G2 Z6+

14897 Oxidizing43 12 - 178.90 Ultra low VOC; very fast dryKelsol® 585-W-43 114W/ Ammonia

900(CPS)

alkyds WaTer reduCible

diSPerSion

Oxidizing70 36 - 408.75Economical with good humidity resistance

6091458Kelsol® 3940-G4-70 G4 Z6+

Product % SolidS oil tyPedenSity(lbS/GAl)

commentSAcid vAlue(SolidS)

Hydroxyl vAlue

(nv)

Product code

Solvent viScoSity(G - H)

Oxidizing70 36 - 408.85Economical with good corrosion resistance; faster dry times than KELSOL 3940-G4-70

8691457Kelsol® 3941-G4-70 G4 Z6+

Oxidizing70 38 - 428.85Excellent corrosion resistance with fastest dry time

9490256Kelsol® 3964-B2G-70B2/G4(50/50)

Z6±

Oxidizing70 36 - 408.70Good balance of performance properties and value

8591449Kelsol® 3969-B2G-70B2/G4(50/50)

Z6+

Oxidizing70 36 - 408.85Good combination of corrosion, humidity and water resistance

8591742Kelsol® 3969-G4-70 G4 Z6 - Z6+

Oxidizing42 12 - 17 1548.90Ultra low VOC; good gloss development

14896Kelsol® 580-W-42 W/ Ammonia

1600 (CPS)

CHAin-SToPPed

76

Linseed45 Excellent dry over tannin-containing wood15169 73 - 85 --W/G4

(80/20)Kelsol® 3939-WG4-45 8.00 V + 1/2 -

Z1 + 1/4

Oxidizing75Economical with very good flexibility; high OH value for melamine crosslinking

15142 39 - 43 65B2/G

(64/36)Kelsol® 3910-B2G-75 8.60 Z5 + 1/2 -

Z6 + 1/4

Oxidizing75 G4Capable of higher solids at dip tank viscosities

91212 28 - 32 60Kelsol® 3912-G4-75 8.83 Z5 + 3/4 -Z6 + 1/4

Oxidizing75 4615127 39 - 43B2/G4(50/50)

Excellent dip tank stabilityKelsol® 3906-B2G-75 8.65 Z6±

alkyds WaTer reduCible (ConTinued)

medium oiL

Product % SolidS Solvent oil tyPe commentSProduct

codeAcid vAlue

(SolidS)

Hydroxyl vAlue

(nv)

SHorT oiL

medium oiL

modiFied oiLS

Long oiL

denSity(lbS/GAl)

15257 Oxidizing80 52 - 58G2/G5 (75/25)

85Architectural and industrial primers, semi-gloss and gloss systems; good shelf stability

Kelsol® 3922-HV-G-80 8.65 Z6

viScoSity(G - H)

Oxidizing75 46 Excellent blending resin for emulsions15126 38 - 42B2/G4(50/50)

Kelsol® 3905-B2G-75 8.55 Z4 + 1/2 -Z5 + 1/2

Oxidizing75Good exterior durability and salt spray; fast dry

15128 39 - 43 39B2/G4(50/50)

Kelsol® 3907-B2G-75 8.55 Z6+

Linseed45W/G4

(80/20)Excellent wood penetration15148 85 - 97 --Kelsol® 3931-WG4-45 8.30 T - V + 1/2

Oxidizing75 General purpose resin; good flexibility15123 38 - 42 28B2/G4(50/50)

Kelsol® 3902-BG4-75 8.56 Z5 + 1/2- Z6

Kelsol® 3950-B2G-70 Oxidizing70 8.43 - 8.53Phenolic modified; exhibits excellent adhesion, fast air dry, resists lifting by strong solvents

15156 39 - 43 --Z3 (approx.)

B2/G(70/30)

98

Beckosol® 10-060 Z-Z2 C - F7.9870 5.5 8 2410060 50 MM SoyaStandard long oil; architectural and maintenance enamels; meets TT-r-266, Type 1, Class A

65

Beckosol® 10-061 T - V C - F7.7360 5.5 8 2410061 50 MM SoyaArchitectural and maintenance enamels; meets TT-r-266, Type 1, Class B

65

Beckosol® 10-539 Z1 - Z3 I - K8.2090 10 6 ND10539 70 MM oxidizing High solids long oil alkyd for architectural enamels; VOC<250 g/LLong

Beckosol® 1272 W - Y E - H8.3597 min 6-10 10 1614576 80 M-- Soya High solids vehicle for architectural enamels77

Beckosol® 4026-M-66 W - Y F - I7.7560 10 7 2595952 50 MM Soya Architectural enamels; faster drying long oil62

alkyds solvenT-borne

Long oiL

reduced viScoSity

Product % SolidS Solvent % PAmin nv

denSity(lbS/GAl)

commentSviScoSity(G - H)

viScoSity SolidS reducinG Solvent

Acid vAlue(SolidS)

GArdner color

Product code oil tyPe

oil% min.or oil

lenGtH

Beckosol® 1271 W - Y E - H8.3597 min 6-10 10 1614573 80 M-- Linseed High solids vehicle for architectural enamels77

Beckosol® 2502-ML-60 Z2 - Z4 S - U7.7060 10 6 --17515 50 MM Soya Architectural enamelsLong

Beckosol® 10-065HVM Soya Z3 - Z5 G - K7.85 High solids vehicle for architectural enamels70 10 6 23.510065 50 MOM 65

Beckosol® AX-119M Z3 - Z5 B - D7.6560 7 6 2491026 40 MOMO Soya Architectural enamels62

1110

Beckosol® 11-029M Z3-Z5 G - 17.2740 10 6 3011029 30 MOMO Soya Wood primers; high drink resin52

Beckosol® 12-054 Z2-Z4 K - N8.3250 8 6 4112054 40 xX TOFAStandard short oil; high viscosity baking enamels with good initial color and very good exterior durability

32

Beckosol® 11-035 Y - Z2 F - J7.6050 8 8 3511035 40 MM Soya Standard medium oil; industrial primers and enamels52

Beckosol® 1700-M-60 V - X H7.9060 12 8 --14727 50 MM SoyaExcellent exterior durability; meets Federal specification TT-E-490E and TT-E-1593B

SiliconizedShort

Beckosol® 11-081 Z - Z2 G - J7.4450 8 8 3511081 40 VV LinseedTraffic paints; industrial primers and enamels52

Beckosol® 11-112 Z4 - Z5 S - V7.6250 10 6 3411112 40 MM Soya Industrial primers and enamels; high drink resin53

Beckosol® 3101-ZP-40 Z1 - Z3 F - H7.4140 10 6 --17500 25 PMO Soya Interior flat finishesMedium

alkyds solvenT-borne (ConTinued)

medium oiL

SHorT oiL

reduced viScoSity


denSity(lbS/GAl)



Acid vAlue(SolidS)

GArdner color


oil% min.or oil

lenGtH

Beckosol® 11-090 Z3 - Z5 D - G7.7260 8 8 3411090 45 VV Soya Traffic paints53

Beckosol® 11-630 Z4 - Z6 Q - U7.6550 10.5 8 3511630 40 MM Soya Industrial primers and enamels50

Beckosol® 11-070 Soya/Linseed V - Y C - G7.60

Industrial primers and enamels ; meets Federal specs TT-R-266 and Type III

50 8 10 3111070 40 MM 56

Beckosol® 6065-X-50 TOFA Z1 - Z3 --8.30 Economical fast drying enamels50 10 4 --14701 -- --X Short

1312

Beckosol® 2635-M-50 Z6 max 32-60 Strokes7.7950 10 4 --91644 40 XM Soya Rapid dry medium; industrial

primers and enamelsMedium

Beckosol® 6440-A4-85 Z4 - Z5 C - F8.6085 10 8 --14762 60 A4A4 Sunflower Fast dry durable HS industrial finishesMedium

Beckosol® AB-125 Z2 - Z4 D - E8.4050 7.5 5 --90108 34 XX TOFA

Fast dry enamels, shopcoats, and conversion varnishes; good hardness and color; good exterior durability; rapid response with UF and MF resins

Short

Beckosol® 6421-X-75 Z6± B - F8.9575 10 8 --90082 60 K3X Sunflower High solids; fast dry; low VOC enamels and shopcoatsShort

Beckosol® 6422-K3K4-75 Z2-Z3+1/4--8.8075 10 8 --91649 -- --

K3/K4/A150 (45/45/10)

oxidizingHigh solids; fast dry; near HAPs free; low VOC enamels and shopcoats

Short


CHAin-SToPPed

reduced viScoSity


denSity(lbS/GAl)



Acid vAlue(SolidS)

GArdner color


oil% min.or oil

lenGtH

Beckosol® EP-2692 Z - Z4 --8.1650 14 5 --17551 -- --X/V (75/15) oxidizing Fast dry enamels and shopcoats; good hardness and colorShort

Beckosol® 6422-K3-75 X+1/2-Z+1/2--8.7075 10 8 --91044 -- --M Sunflower

High solids; fast dry; near HAPs free; low VOC enamels and shopcoats

Short

Beckosol® 12-102 TOFA X - Z E - H8.28

Standard chain-stopped; fast dry enamels, shopcoats, and conversion varnishes ; good hardness and color; good exterior durability; rapid response with UF and MF resins

50 8.5 6 --12102 40 XX Short

1514

Amberlac® 1001 X - Z B - E7.5060 8.3 4 --14427 40 MM Linseed Sanding sealers, enamels, aerosol paintsVT Mod.

Amberlac® 1074 Y - Z1 C - F7.4060 7 4 --14428 40 VV Linseed Sanding sealers, dry fog coatings, aerosols; very fast dryVT Mod.

Amberlac® 13-046 T - V D - F8.1850 14 5 --13046 40 XX Soya General topcoats with fast dry; good exterior durability, gloss and color

Acrylic Mod.

Amberlac® 3704-V-60 X - Z --7.5060 14 6 --14921 -- --V/T Proprietary High solids for lower VOC primersVT Mod.


CoPoLymerS

reduced viScoSity


denSity(lbS/GAl)



Acid vAlue(SolidS)

GArdner color

Product code oil tyPe modifier

Amberlac® 13-802 N - R --8.0050 14 4 --13802 -- --X DCOGeneral topcoats with fast dry; excellent exterior durability, gloss and color

Acrylic Mod.

Amberlac® 13-038 Soya X - Z1 E - H7.37 Sanding sealers, enamels, aerosol paints50 10 5 --13038 35 VV VT Mod.

1716

Beckosol® 10-015 X - Z G - J8.0860 20 10 2710015 40 VX/V (50/50) Linseed

Drum, toy and chassis enamels; fast drying; good water resistancePhenolic

Beckosol® 10-613 Y - Z1 F - J7.7860 25 10 1510613 40 VX/V (94/6) TOFA

Drum, toy and chassis enamels; 1000% MS tolerance; fast drying; good water resistance

Phenolic

Beckosol® 13-204 T - V --7.9050 20 15 --13204 -- --S Oxidizing

Phenolic varnish used as a modifier for long and medium oil alkyds to improve through dry, hardness, water resistance and recoatability

Phenolic

Beckosol® 3859-Z-80 X - Z --8.80-9.0080 18.5 10 --91072 -- --K3 Oxidizing

Lift resistant primers; drum, toy and chassis enamels; fast drying; good water resistance; meets Federal specification TT-P-664D

Rosin/ Phenolic

Beckosol® 663-6X3-50W+1/4-Y+1/4 B - E7.8050 29 10 3814667 40 V/T/B1V/T/B1 Linseed/

Tung


Rosin/ Phenolic


modiFied

reduced viScoSity


denSity(lbS/GAl)



Acid vAlue(SolidS)

GArdner color

Product code oil tyPe modifier

Beckosol® 91-169 N - R --9.5576 6 7 --91169 -- --A100 Oxidizing High chemical resistance and hardness; high solidsChlorinated

Beckosol® 663-X-50 N - R G - K8.3050 29 10 3814668 40 XX Linseed/ Tung


Rosin/ Phenolic

Beckosol® 12-079 Linseed/ CWO X - Z1 F - J8.29


50 20 14 4012079 40 XX Rosin/ Phenolic

1918

Beckosol® 12-021 X - Z J - M8.6560 8.5 3 4712021 50 TT CoconutPlasticizer for nitrocellulose lacquers; light-colored baking enamels

31

Beckosol® 12-035 Z1 - Z3 A - D8.6560 8.5 3 4712035 40 XX CoconutStandard coconut; plasticizer for nitrocellulose lacquers; light- colored baking enamels

31

Beckosol® 1477-X-65 X - Z --8.6065 8 6 --14652 -- --X Castor Improves elongation and flexibility of nitrocellulose lacquers--

Beckosol® 90-095 Z1 - Z3 D - F9.0270 12 2 3090095 50 A4A4/K3 CoconutPlasticizer for nitrocellulose lacquers; light-colored baking enamels

45

Beckosol® 91-689 Z1 - Z3 --8.8470 7 3 --91689 -- --T/X/B(8/34/58) Coconut Conversion varnish; light colored

furniture lacquersShort


non-oxidizing oiL

reduced viScoSity


denSity(lbS/GAl)



Acid vAlue(SolidS)

GArdner color


oil% min.or oil

lenGtH

Beckosol® 2575-X-60 Z2 - Z4 C - E8.7060 10 3 --14653 40 XX CoconutPlasticizer for nitrocellulose lacquers; light-colored baking enamels

Short

Beckosol® 1351 Castor W - Y --8.60 Improves elongation and flexibility of nitrocellulose lacquers97 Min 10-15 5 --14739 -- ---- Long

Beckosol® 90-185 Z4 - Z6 K - N9.2180 12 3 3890185 50 MSCoconutHigh solids; plasticizer for nitrocellulose lacquers; light- colored baking enamels

28A4/K3

2120

135 - 1558.09-8.13 Redwood finishes, varnishes and enamels; Esskol bodies faster than Kellin; chemically modified linseed oil

14502 18-23 Y-Z 812-17Esskol Y-Z

165 - 1807.75-7.79Paints containing blacks and other dry retardant pigments; dries in 8 hours; meets ASTM D 260 Type II and AASHTO M 233-79 specifications; raw linseed oil with driers added

14492 0.70 B 167Double Boiled

170 - 1907.70-7.73For white paints, light tints, etc.; oil is alkali refined for excellent wetting properties; ideal for reactive pigments

14490 0.40 A- 62-3A-R Varnish

and Grinding

LinSeed VArniSH/grinding oiLS

150 - 1707.85-7.87A slightly oxidized, heat break-free oil for litho varnishes and patent leather; fast kettle polymerization14451 0.90-1.40 D 112-5Aged

oils

rAw LinSeed oiL

BoiLed LinSeed oiLS

Semi-oxidized LinSeed VArniSH oiL

Product commentSiodine vAlue

denSity(lbS/GAl)

Product code

viScoSity(StokeS)

viScoSity(G-H)

GArdenercolor

Acid vAlue(SolidS)

4 177 - 1957.70-7.74Well settled and double filtered; it conforms to Federal specification TT-L-215 and ASTM D 234-82

14402 0.50 A 13Raw

170 - 1907.71-7.80Anti-spalling compound; dries in 12-16 hours; conforms to Federal specification TT-L-190 and ASTM specification D 260-80, Type I

614491 0.50 A 13Boiled

177 - 1907.70-7.73For light-colored varnishes and alkyds, white enamels, etc.; alkali refined and offers excellent heat bleaching; conforms to TT-L-1155 specifications

0.314481 0.50 A 6Superior

modiFied LinSeed oiLS

120 - 1457.98-8.03Chemically treated linseed; polymerizes rapidly, dries fast, and has excellent water resistance; for printing inks

8-1414506 6.3-11 U-W 8Kellin U-V

Varnishes, enamels aluminum paints, trim and trellis, cold cut varnishes, reinforcement oil; Dicyclopentadiene copolymers of linseed oil that produce vehicles of quick hard dry and excellent water and alkali resistance

150 - 1628.10-8.13 414500 46-64 Z3-Z4 10Cykelin

100 - 1157.55-7.6514501 5.0-8.9 S-V 111-4Cykelin 70

2322

95 - 1107.91-7.9714614 17-23 Y-Z 94-8Drisoy Y-Z

126 - 1367.62-7.65Alkyds, varnishes, and enamels; alkali refined; heat and acid break-free14420 0.40 A- 120.5Non-Break

122 - 1327.93-7.9814474 13-18 X-Y 76-9T-1215 X-Y

60 - 808.25-8.2914587 98-148 Z5-Z6 107-14Special T-Blown Z5-Z6

oils (ConTinued)

PoLymerized LinSeed oiLS


denSity(lbS/GAl)

Product code

viScoSity(StokeS)

viScoSity(G-H)

GArdenercolor

Acid vAlue(SolidS)

115 - 1308.04-8.07

These are the highest quality polymerized oils available; produced to remove all traces of decomposed matter; their low aid, light color, mini-mum after yellowing-suggest uses in paints, varnishes, enamels, flats, aluminum paints, printing inks, lithographic varnishes, and brake linings; OKO’s are available to meet all requirements of Federal specification TT-L-201, Type II

314470 790-960 Z9 6M-37 OKO

Exterior house paints, varnishes, enamels, and flats; T-1215’s are available to meet all requirements of Federal Specification TT-L-201, Type I

115 - 1257.97-8.00 6-914477 36-63.4 Z2-Z4 8T-1215 Z2-Z4

SoyBeAn VArniSH oiLS

oxidized SoyBeAn oiLS

modiFied SoyBeAn oiLS

126 - 1367.62-7.64Alkyds, varnishes, enamels for whites and light tints; alkali refined; excellent heat, bleach, and color; meets TT-S-600, Type I and ASTM D 1462

0.314421 0.40 A- 5Superior

Caulking compounds, plasticizers; contains no drier; good package stability

60 - 858.19-8.27 6-1214586 36-64 Z2-Z4 8Special T-Blown Z2-Z4

Varnishes, enamels, exterior house paints, and printing inks; chemically-treated soybean oils; dry like linseed; recommended for general replacement of linseed oil

110 - 1307.82-7.87 6-814613 2.0-2.5 G-J 6Drisoy G-I

2524

Water-dispersible lecithin for water emulsion paints95.008.53-8.6314908 25-60 Z2 1222-31Kelecin 1081

13 7.75-7.852.2Water, alkali and abrasion-resistant copolymer resin for interior primers and finishes

23 - 3614408 70 M Z-Z2Admerol® 351-M-70

oils (ConTinued)


denSity(lbS/GAl)

Product code

viScoSity(StokeS)

viScoSity(G-H)

GArdenercolor

Acid vAlue(SolidS)

Product commentSdenSity(lbS/GAl)

Acid vAlue(SolidS)

Product code % SolidS Solvent GArdener

colorviScoSity

(G-H)viScoSity

(StokeS)

SoyBeAn oiL PLASTiCizerS

miSCeLLAneouS modiFied oiLS

SoyBeAn LeCiTHinS

75 - 908.13-8.20Hydroxl Value =112, Lacquers, coated fabrics, artificial leather; chemically-treated soybean oils; improved compatibility with hydroxyl containing resins such as N/C

8-1214590 5.5-6.3 T-U 11Soy Solinox T

11 7.56-7.664.5Flexible, long oil oxidizing copolymer supplied at 70% solids for TT-V-81F and TT-V-121G

4.7 - 6.714406 70 M R-U+Admerol® 75-M-70

Emulsifying and dispersing agent for protective coatings, mastics, animal feeds, automotive specialty chemicals, textiles, rubber processing, plastics, cosmetics, and food products

--8.45-8.55 3214783 150 max Z6 10*Kelecin F

2726

10 max Coil Coatings, LinearA150/A6

High hardness with good flexibility; good weatherability

25-3514734 65 30Aroplaz® 5725-Z-65

58 - 68 Water-dispersibleG4High gloss, color and gloss retention, good flexibility, chemical resistance

90-13091758 75 75Aroplaz® 7070-G4-75

10 max Coil Coatings, LinearA150

Excellent flexibility with good hardness development and overbake color stability; offers good QUV gloss retention and Xenon weatherometer gloss retention

63-9690168 65 40Aroplaz® 6126-Z-65

12 max AROPLAZ 7757-S ResinG4/X

Coil, can and general industrial applications

45-10091341 70 30Aroplaz® 91-341

55 - 65 Water-dispersibleBExcellent cure response with 20% to 30% amino crosslinkers, excellent flexibility, impact resistance, stain and chemical resistance

20-3515120 75 180Aroplaz® 5293-B-75

5 max High SolidsK4Designed for baking enamels, high hardness, low VOC27-4791312 90 1 40Aroplaz® 6820-K4-90

wATer diSPerSiBLe

SoLVenT-Borne

58 - 66 Water-dispersible, acrylic modifiedW/G4

White or light-colored baking enamels, clear baking formulations

25-5015158 55 120Aroplaz® 4097-WG4-55

5 max Silicone modifiedA6/A150/BExterior coil coatings requiring the ultimate in durability

2-815244 60 50Aroplaz® 1720-Z-60

10 High SolidsX/A6Economical with good hardness and flexibility

70-12090065 90 --Aroplaz® 6749-ZA6-90

58 - 68 Water-dispersibleB2/G4High gloss, color and gloss retention, good flexibility, chemical resistance

550-75091307 85 75Aroplaz® 7070-B2G-85

8 max Coil Coatings, LinearA150/A7

High hardness, fast viscosity reduction for higher solids formulas24-3414731 70 40Aroplaz® 6025-Z-65

12 max Coil Coatngs, Slightly BranchedA150

Coil-coating applications requiring high hardness and excellent overbake color retention

63-14895891 70 --Aroplaz® 7757-S

PolyesTersProduct commentSAcid vAlue

(SolidS) tyPeProduct code % SolidS Solvent

Hydroxyl vAlue(SolidS)

viScoSity(StokeS)

2928

11 - 18 5 7.6 Wood & Metal

Low film color41045MS5591189 Soya 5.0Urotuf® F14-M-55

6 - 11 7 7.64 Wood & Metal

Blending resin37040MS6091046 Soya 2.0Urotuf® F17-M-60

23 - 36 5 7.55 Wood & Metal Exterior durability45550MS5014943 Sunflower 3.0Urotuf® F19-M-50

5 - 9 4 7.6Wood &

Metal High durability46050MS5091261 Proprietary 2.0Urotuf® F21-M-50

27 - 46 6 7.60Wood &

Metal Low film color, high gloss36540MS6090194 Soya 2.0Urotuf® F47-M-60

27 - 46 5 8.02Wood &

Metal Fast dry, easy flattening48050Toluene5014960 Linseed 2.0Urotuf® F78-T-50

50 - 75 6 7.85Wood &

Metal High gloss, VOC compliance23525MS7591735 Proprietary 1.0Urotuf® F83-M-75

27 - 46 4 7.45Wood &

Metal Fast dry, easy flattening45050MS5014950 Soya 2.0Urotuf® F48-M-50

27 - 46 5 8.05Wood &

Metal Fast dry, easy flattening48550Xylene5014961 Linseed 2.0Urotuf® F78-X-50

27 - 46 6 7.90Wood &

Metal Blending resin19020MS8090080 Proprietary 2.5Urotuf® F87-M-80

18 - 27 6 7.55Wood &

Metal High gloss36040MS6014956 Linseed 1.7Urotuf® F77-M-60

27 - 46 5 7.45Wood &

Metal Fast dry, easy flattening45050MS5014959 Linseed 2.0Urotuf® F78-M-50

2.5 - 3.2 6 7.60Wood &

MetalHigh gloss, compliance using exempt solvent35034/11MS/VMS5591861 Linseed 1.8Urotuf® F89-E3M-55

2.8 - 3.7 5 7.60 Wood & Metal

High gloss, low color, compliance using exempt solvent35034/11MS/VMS5591852 Soya 1.8Urotuf® F90-E3M-55

23 - 46 6 7.7 Wood & Metal High film hardness37040MS6090200 Soya 5.0Urotuf® F16-M-60

urALkydS

oiL modiFied

solvenT-borne ureThanesProduct commentSAcid

vAlue SubStrAteProduct code oil % SolidS

GArdner color

denSity(lbS/GAl)

viScoSity(StokeS)

Solvent Solvent(%)

voc (G/l)

3130

0.3 - 1.0 2 8.36 Wood, Concrete, Metal44044X 8.2Urotuf® M23-X-56 Low VOC version of UROTUF® M2190086 56

0.5 - 2.0 1 8.60 Wood, Concrete, Metal3356/30E2/X 8.1Urotuf® M26-E2X-64 Lowest VOC version of

UROTUF® M2191824 64

0.3 - 0.9 3 8.60 Wood, Concrete, Metal53026/26A6/X 9.8Urotuf® M37-A6X-48

Non-catalyzed version of UROTUF® M86, improved stability91315 48

0.9 - 1.5 1 8.37 Wood, Concrete, Metal44044X 12.7Urotuf® M25-X-56 Low VOC version of UROTUF® M2290087 56

AromATiC

ALiPHATiC

MoisTure Cure ureThanesProduct commentS

nco content %

on nvSubStrAteProduct

codeGArdner

colordenSity

(lbS/GAl)viScoSity

(StokeS)Solvent Solvent

(%)voc (G/l)

0.9 - 2.0 1 8.15 Wood, Concrete, Metal5673/55A6/X 7.8Urotuf® M37-A6X-42

High hardness, OEM wood finishes

14980 42

Interior abrasion resistant coatings0.7 - 1.3 1 7.98 Wood, Concrete, Metal58060X 6.2Urotuf® M21-X-40 14976 40

0.5 - 1.1 1 7.98 Wood, Concrete, Metal57060X 8.1Urotuf® M22-X-40 Exterior abrasion resistant coatings14864 40

0.5 - 2.0 2 8.51 Wood, Concrete, Metal36836X 8.2Urotuf® M26-X-64

Lower VOC version of UROTUF® M2114989 64

1.5 - 3.0 1 8.53 Wood, Concrete, Metal38037X 8.2Urotuf® M27-X-63

Lower VOC version of UROTUF® M22

14865 63

0.7 - 1.7 3 8.55 Wood, Concrete, Metal51325/25A6/X 7.6Urotuf® M37-A6X-50 Fast cure14991 50

% SolidS

3332

Higher solids version of UROTUF® L51

Rigid Plastic,Wood, Metal

Urotuf® L51-35 8.81 -- 10022.94103515186 50-1000

NMP free, moderate film hardness, excellent color stabilitySemi-rigid PlasticUrotuf® L522-G8W-40 8.66 1500 40021.52004091864 100-600

Highly flexible films, excellent abrasion resistanceSemi-rigid PlasticUrotuf® L53-MPW-30 8.62 1100 41024.33553091152 20-100

Soft, highly flexible films, excellent hydrolytic stability

Flexible Plastic,Leather

Urotuf® L55 8.53 500 66027.72403515185 50-500

HAPS free, high film hardness, good abrasion resistance


Urotuf® L57-MPW-35 8.76 4000 22030.02603591327 20-100

Very low gloss, highly flexible filmsFlexible Plastic,

LeatherUrotuf® L60-MPW-45 8.89 1200 75018.01604591526 500-2000

Higher solids, lower NMP version of UROTUF® L51


Urotuf® L63-MPW-38 8.62 4500 20023.22703891974 50-300

THermoPLASTiC wATer-Borne ureTHAneS

WaTer-borne ureThanesProduct commentSAcid vAlue SubStrAteProduct

code % SolidSdenSity

(lbS/GAl)viScoSity

(cPS)coSolvent voc

(G/l)

moduluS 100%

(PSi)

elonGAtion(%)

High hardness, excellent chemical resistance


Urotuf® L51 8.75 4000 15023.0405NMP

NMP

NMP

G8

NMP

NMP

NMP

NMP

NMP

NMP

NMP

NMP

G8

NMP

3015180 30-160

Very soft, highly flexible films, excellent hydrolytic stability


Urotuf® L56-MPW-36 8.48 350 70021.72903691151 70-1000

Excellent heat color stability, solvent resistance


Urotuf® L512 8.76 -- 0022.74153090230 10-75

Soft, highly flexible films, blending resin


Urotuf® L59-40 8.88 500 81020.52104091506 200-1000

Moderate film hardness, excellent color stabilitySemi-rigid PlasticUrotuf® L522-MPW-40 8.80 1250 41021.51604091321 50-300

OH functional, very low gloss, highly flexible films


Urotuf® L62-G8W-40 8.80 650 50014.51604091732 500-2000

High acid content for polyaziridine crosslinkingSemi-rigid PlasticUrotuf® L54-MPW-32 8.80 3000 30046.94153291135 500-2000

3534

Excellent durability, low color accentuates wood appearanceWood, MetalUrotuf® F97-MPW-33 8.50 N/A N/A26.7185NMP3391293 50-300

Precatalyzed (proprietary) version of UROTUF® F97

Wood, MetalUrotuf® F982-MPW-33 8.50 N/A N/A26.7182NMP3391875 50-300

High solids for higher film build; excellent durability

Wood, Metal, Concrete

Urotuf® F100-W-36 8.53 N/A N/A25.650None3691795 100-3000

SeLF CroSSLinking oiL-modiFied ureTHAneS

WaTer-borne ureThanes (ConTinued)

commentSSubStrAtedenSity(lbS/GAl)

moduluS 100%

(PSi)

elonGAtion(%)

Good exterior durabilityWood, MetalUrotuf® F96-MPW-32 8.50 N/A N/A29.1190NMP3291210 50-300

Pre-catalyzed (Mn) version of UROTUF® F97


Acrylic modified, economicalWood, MetalUrotuf® F99-MPW-36 8.60 N/A N/A26.4135None3691786 50-100

Higher solids version of UROTUF® F97


Product Acid vAlueProduct

code % SolidS viScoSity(cPS)

coSolvent voc (G/l)

3736

Fast dry with moderate isocyanate demand resulting in moderate cost-in-use; Capable of polyurethane topcoats at 420 g/L

5602K solvent based

topcoatsA67091602 --Arolon® 6436

Excellent UV resistance; excellent scratch and mar resistance

326Automotiveclear coats

A47191787 --Arolon® 6473

Lowest isocyanate demand acrylic polyol resin; capable of polyurethane topcoats at 340 g/L

6402K solvent based

topcoatsA48091745 --Arolon® 6437

Excellent gloss and color retention; excellent chemical resistance; ideal for two component flooring topcoats

288 4 max--10015097 300 - 600Aroplaz® 4294Aliphatic

Polyester Polyol

Fast tack free time; High hardness825 10 maxK3/X (92/8)8091003 8.5Beckosol® 6193-K3-80Alkyd Polyol,

Branched

Excellent chemical resistance and exterior durability270 3 max

Aliphatic Polyester Polyol, Branched

K49091536 40 - 100Aroplaz® 6420

Water-borne polyol to be used with water dispersible isocyanates for high gloss, durable finishes at very low VOC

84High Gloss

TopcoatsWater4391812 500 maxArolon® 5900

ACryLiC PoLyoLS

PoLyeSTer PoLyoLS

ALkyd PoLyoLS

Polyols for 2k ureThanesProduct commentSAPPlicAtionSProduct

code % SolidSHydroxyl

equivAlent WeiGHt(SolidS)

Solvent viScoSity(StokeS)

Product commentSAcid vAlue(SolidS)

tyPeProduct code

% SolidSHydroxyl



Product commentSAcid vAlue(SolidS)

tyPeProduct code

% SolidSHydroxyl



3938

Low viscosity, high molecular weight, aliphatic polyfunctional epoxy resin, compliant with FDA 175.105*

675 1 Polyfunctional--10037051 250 8.50Epotuf® 37-051

Bis-A; standard undiluted liquid epoxy resin185 1 Bis-A Liquid Resin--10037140 12500 9.70Epotuf® 37-140

Dispersion of liquid epoxy resin; used to cure EPOTUF® 37-680 and EPOTUF® 37-685200 milky

Bis-A Liquid ResinDispersion

W7837143 3000 9.30Epotuf® 37-143

Medium viscosity; 100% reactive epoxy resin based on Bis-A diluted 15% by weight with EPOTUF® 37-051

217 3Aliphatic

Polyfunctional--10037100 4000 9.40Epotuf® 37-100

Low viscosity; 100% reactive epoxy resin based on Bis-A diluted 20% by weight with EPOTUF® 37-058, compliant FDA 175.300, 176.170 and 176.180*

197 1Monofunctional

(Alkyl Glycidyl Ether C12-C14)

--10037127 600 9.20Epotuf® 37-127

Medium viscosity; 100% reactive diluted epoxy resin based on Bis-A diluted 8% by weight with EPOTUF® 37-058

185 3Monofunctional

(Alkyl Glycidyl Ether C12-C14)

--10095406 2600 9.40Epotuf® 95-406

Aliphatic monofunctional epoxy diluent based on C12-C14 alcohol; low viscosity, low volatility and toxicity

290 1 Multifunctional--10037058 13 7.40Epotuf® 37-058

Bis-A/Bis-F epoxy resin blend diluted 12% by weight with EPOTUF® 37-058, meets ANSI 118.3 for water washable grouts when cured with EPOTUF® 37-628

190 2 Bis-A/Bis-F--10037108 1400 9.30Epotuf® 37-108

Low viscosity; 100% reactive epoxy resin based on Bis-A, excellent penetration, high filler loading

200 2Monofunctional

(Aromatic Glycidyl Ether)

--10037128 750 9.40Epotuf® 37-128

reACTiVe diLuenTS

LiQuid reSin

wATer-Borne LiQuid reSin

diLuTed reSin

ePoxy resinsProduct commentStyPeProduct

code% SolidS eeW

(SolidS)

GArdner color

Solvent viScoSity(cPS)

denSity(lbS/GAl)

* For FDA applications, contact the Reichhold product regulatory group for specific use limitation information.

4140

Improves flexibility, adhesion and weathering; very fast viscosity reduction curve, elongation up to 25%, compliant with FDA 175.105, 175.300, 176.170 and 176.180*

500 5 Flexible--10037051 50000 8.90Epotuf® 37-151

Meets MIL-P-53032 primers; compatible with acrylic emulsions-- 7 Acrylic modifiedG47038690 15000 8.40Epotuf® 38-690

Rosin modified epoxy ester for use in clear floor varnishes; air dry primers for steel; brush applied maintenance finishes compliant with FDA 175.300*

-- 8 Rosin ModifiedM6038406 3000 7.70Epotuf® 38-406

Type 1 epoxy resin500 3 Type 1X7538505 11000 9.00Epotuf® 38-505

Elastomer modified resin that produces flexible, impact resistant films when cured with conventional curing agents340 10 CTBN--10015213 195000 8.80Epotuf® G293-100

Urethane modified to provide improved adhesion and chemical and solvent resistance including aerospace hydraulic fluids500 3 UrethaneX/K26095472 1300 8.60Epotuf® 95-472

Pre-neutralized epoxy ester dispersion; low VOC capability-- milky Aqueous DispersionW/G24038694 3500 8.40Epotuf® 38-694

Reduced VOC due to exempt solvent content-- 6 Epoxy EsterE1/A1005091853 16 8.96Epotuf® 91-853

Urethane modified to provide improved adhesion and chemical and solvent resistance including aerospace hydraulic fluids

300 3 UrethaneK2T/K66095473 900 8.60Epotuf® 95-473

Flexographic inks, fast air or force dry primers with good corrosion resistance, gloss topcoats, compliant with FDA 175.300*

-- 7 Acrylic ModifiedG27091263 49000 8.40Epotuf® 91-263

Flexographic inks, fast air or force dry primers with good corrosion resistance, gloss topcoats, compliant with FDA 175.300*660 7 FlexibleX7538572 2000 8.50Epotuf® 38-572

Fast air or force dry primers with good corrosion resistance, compliant with FDA 175.300*, 176.170 and 176.180*

-- 5 Epoxy EsterG47038692 11000 8.70Epotuf® 38-692

Epoxy ester based on type 4 epoxy for use in baking enamels, air dry primers, floor enamels, compliant with FDA 175.300*-- 6 Epoxy EsterX5038411 700 8.00Epotuf® 38-411

Type 1 epoxy resin490 3 Type 1T7538507 9700 9.10Epotuf® 38-507

modiFied reSinS

wATer-reduCiBLe ePoxy reSinS

SoLVenT CuT ePoxy reSinS

SoLVenT CuT reSinS

ePoxy resins (ConTinued)

Product commentStyPeProduct code

% SolidS eeW(SolidS)

GArdner color

Solvent viScoSity(cPS)

denSity(lbS/GAl)


4342

Tank and railcar linings, secondary containment Best chemical resistance and acid resistance

40Adduct

ModifiedEpotuf® 37-701 837701 100 8.9 300 4075

Decoupage; protective coatings, modifier in trowelable flooring; fast set adhesives, grouts. Modified amine with fast cure and good moisture and blush resistance

ModifiedEpotuf® 37-667 16 237667 100 8.0 1100 83157

FDA compliant linings; metal and concrete primers; self-levelling floor coatings. FDA 175.300 compliant; DOT non-corrosive

200 13 Modified91442Epotuf® 91-442 100 8.1 6000 75141

Water-washable grouts; metal and concrete primers; highly filled high build flooring. Improved chemical resistance vs. traditional amidoamines; good reactivity in the presence of moisture

Modified Amide/

ImidazolineEpotuf® 37-628 112 1037628 100 8.0 350 4076

Adhesives; general purpose terrazzo flooring; grouts. Light color, low viscosity, moderate pot life, good gloss and blush resistant films

AdductEpotuf® 37-606 45 537606

ALiPHATiC AmineS

AmidoAmineS

CyCLoALiPHATiC AmineS

ePoxy Curing agenTsProduct commentS/APPlicAtionStyPeProduct

code

100

% SolidS GArdner color

8.1

denSity(lbS/GAl)

300

viScoSity(cPS)

45

recommended uSe level

(PHr)

Gel time(min @25°c, 100G mix)

85

General purpose flooring. Moderate viscosity; bonds well to damp concrete

Amide/Imidazoline

Epotuf® 37-620 120 1037620 100 7.9 550 5094

General purpose flooring. Improved reactivity vs. EPOTUF® 37-620

AdductEpotuf® 37-630 40 1037630 100 8.1 1050 3565

High solids coatings; chemical resistant flooring. Room temperature curing; low viscosity; light color; excellent chemical resistance

AdductEpotuf® 37-601 50 337601 100 8.4 300 4585

Topcoats; sealers; 100% solids industrial maintenance coatings/floor paints. Very low viscosity and good color stability; high gloss and carbamation resistance under adverse conditions

ModifiedEpotuf® 37-703 32 137703 100 8.5 80 5093

AHeW


4544

High performance coatings. 60% solids in IPA/toluene; high molecular weight polyamideAmideEpotuf® 37-621

1-2 days 117.66037621 8331800 100

Microgel Polyamine Adduct cured with EPOTUF® 37-143. Concrete flooring; high gloss topcoats and enamels

Microgel Polyamine Adduct

Epotuf® 37-680 -- milky8.94237680 134060 --

Electrical potting; encapsulation and casting; adhesives; flooring corrosion and chemical resistant coatings. High imidazoline content; lower viscosity and longer porlife than EPOTUF® 37-625; compliant with FDA 21CFR 175.300*

Amide/Imidazoline

Epotuf® 37-640 165 128.310037640 10012000 55

Corrosion resistant coatings; adhesive. 70% solids in xylene; provides flexibility; long pot-life and good overall properties with solid epoxy resin

AmideEpotuf® 37-6181-2

days 127.87037618 2141450 55

Adhesives and sealants; grouts and mortars; manne and maintenance coatings. Medium viscosity; compliant with FDA 21CFR 175.300*

Amide/Imidazoline

Epotuf® 37-625 120 128.010037625 12037000 65

Microgel Polyamine Adduct cured with EPOTUF® 37-143. IM metal primers for light to heavy duty; concrete coatings, capable of VOC <100 g/L

Microgel Polyamine Adduct

Epotuf® 37-685 -- milky8.95037685 32050 --

High solids coatings; rail car coatings; concrete primer and sealer. Low viscosity and no induction time; achieves performance similar to high molecular weight traditional polyamide/solid epoxy systems

120 12 Adduct8.410037650 1304750 70Epotuf® 37-650

PoLyAmideS

wATer-Borne PoLyAmine AdduCTS

ePoxy Curing agenTs

Amide/Imidazoline

130 70Epotuf® 37-612 135 108.110037612 14750

Electrical potting; encapsulation and casting; adhesives; flooring corrosion and chemical resistant coatings; concrete sealer and grouts. Moderate viscosity & higher reactivity suitable for adhesives and/or wet lay-up laminating. Compliant with FDA 21CFR 175.300 and 175.105* and USDA compliant

Product commentS/APPlicAtionStyPeProduct code

% SolidS GArdner color

denSity(lbS/GAl)

viScoSity(cPS)

recommended uSe level

(PHr)

Gel time(min @25°c, 100G mix)

AHeW


4746

Aliphatic epoxy used to formulate 2K coatings with excellent weatherability; Used for agricultural and transportation coatings

91789 100 12Oxirane-Modified

Ester225Aroflint® 608 N/A

2k non-isoCyanaTe resin sysTeMsProduct % SolidS Solvent tyPe commentSProduct

codeviScoSity

(StokeS)eeW

(SolidS)

Economical for medium-duty applications

15035 90 1.75 195Aroflint® 303-X-90 XOxirane-Modified

Ester

HAPs compliant, low VOC capability, durability91314 71 4 432Aroflint® 809 K4/G3/D

Acid Functional Polyester

Adhesion, hardness, corrosion resistance15037 60 5.5 351Aroflint® 404-XX-90 A4/V/B/EB

Acid Functional Polyester

Product % SolidS Solvent tyPe commentSProduct code

viScoSity(StokeS)

AeW(SolidS)

HAPs compliant, improved dry & hardness

91859 70 13 529Aroflint® 810 K4/G3/DAcid Functional

Polyester

Solvent Resistance15039 71 8 468Aroflint® D808-XD-71 X/A6/DAcid Functional

Polyester

Flexibility, Durability15038 60 2 524Aroflint® 252-Z1-60 M/IBIB/A100Acid Functional

Polyester

PoLyeSTer reSin

ePoxy reSin

4948

One shot matte finishes91466 GMA Acrylic Curing Agent ICI, 200°C -- --Fine Clad® A-266 -- 6500 615 461--

One shot matte finishes91089 GMA Acrylic Curing Agent ICI, 175°C 50 --Fine Clad® A-244-A -- 8000 600 601--

Hydroxy functional acrylic resin; increases stain and chemical resistance; recommended for all polyester based powder coatings

91131 Additive Resin ICI, 200°C 107 --Fine Clad® A-251 -- 2000 -- 531--

PoWder resins

gLyCidAL FunCTionAL ACryLiC reSinS

gLyCidAL FunCTionAL ACryLiC CroSSLinkerS

AddiTiVe reSinS

Develops higher gloss than FINE CLAD® A-254

91335 GMA Acrylic Resin, DDDA Cure ICI, 175°C -- --Fine Clad® A-257 84/16 5100 480 501DDDA

One shot matte finishes91090 GMA Acrylic Curing Agent ICI, 175°C -- --Fine Clad® A-229-30-A -- 8000 530 661--

Hydroxyl and glycidyl functional groups. Improves compatibility between different coatings; increases stain and chemical resistance; recommended for all polyester based powder coatings

91130 Additive Resin ICI, 175°C 50 --Fine Clad® A-241 -- 5800 600 661--

One shot matte finishes--91091 GMA Acrylic Curing Agent ICI, 200°C -- --Fine Clad® A-249-A -- 4600 465 641

Product Product tyPe

reSin/HArdner

rAtiocommentSProduct

codeviScometer

(temPerAture)

c & PviScoSity

(cPS)

Hydroxyl vAlue

AcidvAlue eeW tG

(°c)

SuGGeStedHArdner

GArdner color

5150

PCM high flexibility urethane coatings; 0-T bendB-153091014 OH Polyester,

designed for PCM ICI, 200°C 43 4.2Fine Clad® M-8076 76/21 5500 -- 662

Super durableB-153091620 OH Polyester ICI, 200°C 35 --Fine Clad® M-8230 85/15 5750 -- 603

One shot matte finishesBlocked IsocyanateFINE-CLAD A-249-A

FINE-CLAD A-229-30-A91062

Bifunctional Polyester, Multi

Cure Matte SystemICI, 200°C 22 14Fine Clad® M-8402 Various 3500 -- 632

Low temperature; super durableTGIC91585 COOH Polyester,

TGIC Cure ICI, 200°C -- 35Fine Clad® M-8913 93/7 3500 -- 593

PoWder resins (ConTinued)

BiFunCTionAL And CArBoxyL FunCTionAL For gmA ACryLiC Cure SySTemS

CArBoxyL FunCTionAL

One shot matte finishes91060 Dual ComponentFINE-CLAD A-249-A

FINE-CLAD A-229-30-AICI, 200°C -- 24Fine Clad® M-8400 Various 7900 -- 652

Super durable91545 COOH Polyester, TGIC Cure TGIC ICI, 200°C -- 34Fine Clad® M-8911 93/7 3500 -- 593

One shot matte finishesBlocked IsocyanateFINE-CLAD A-249-A

FINE-CLAD A-229-30-A91486

Bifunctional Polyester, Super Durable Multi

Cure Matte System

ICI, 200°C 22 22Fine Clad® M-8406 Various 1750 -- 523

Low temperature cure systemsTGIC91472 COOH Polyester,

TGIC Cure ICI, 200°C -- 34Fine Clad® M-8950 93/7 3000 -- 503

Product Product tyPe

reSin/HArdner

rAtio

SuGGeStedHArdner

commentSProduct code

viScometer(temPerAture)

c & PviScoSity

(cPS)

Hydroxyl vAlue

AcidvAlue eeW tG

(°c)

GArdner color

HydroxyL FunCTionAL For ureTHAne SySTemS

Superior Chemical Resistance91471 OH Polyester B-1530 ICI, 200°C 100 5Fine Clad® M-8025 65/35 2000 -- 522

Alligator and wrinkle finishesB-153091128 OH Polyester, high molecular weight ICI, 200°C 27 4Fine Clad® M-8100 87.5/12.5 1750 -- 662

5352

65 16 11W 9.10Provides good low temperature touch-up; higher solids40143Synthemul® 40-143 Interior flat and satin finishes1500-2500

60 19 8W 9.10Excellent workability, sandability, crack resistance, low temperature performance97300Synthemul® 97-300 Tape joint compounds1000-2200

55 6 0W 9.00Capable of formulating to near 0 g/L VOC; high scrub, Non-APE91791Synthemul® LV-100 Interior flat and satin finishes100-500

45 59 90W 8.80 50-500Block resistant; excellent mechanical stability; crosslinkable14906Arolon® 860-W-45

Wood varnishes, blending resin for PUDs

43 34 24W 8.58 300Excellent corrosion and humidity resistance; good block resistance91645Arolon® 848-W-42 Industrial maintenance finishes

45 67 63W 8.75 100-300 Fast air dry; excellent chemical resistance14907Arolon® 845-W-45 Wood varnishes

aCryliCscommentSProduct % SolidS Solvent tg (°c)denSity

(lbS/GAl)APPlicAtionS

Product code

viScoSity(cPS)

mfft (°c)

49 13 8W 8.70-8.90 100-350Adhesion to galvanized steel; anti-corrosive pigment stability14920Arolon® 820-W-49 Maintenance primers

42 40 40W 8.86 750 Excellent tannin block; primer/sealer resin96045Arolon® 881-W-43 Wood sealer, prime coat

42 23 20W 8.52 500Excellent corrosion and humidity resistance96036Arolon® 847-W-42 Industrial maintenance finishes

45 37 47W 8.65 1050 Excellent adhesion to plastics14905Arolon® 850-W-45 Plastic coatings

55 6 0W 9.00 100-500 Capable of formulating to near 0 g/L VOC; high scrub, Non-APE, freeze-thaw stable

91846Synthemul® LV-200 Interior flat and satin finishes

STyrene ACryLiC emuLSionS

VinyL ACryLiC emuLSionS

55 20 13W 9.00High scrub latex; Outstanding stain resistance and washability40152Synthemul® 40-152 Interior flat and satin finishes300

55 20 11W 8.95 Provides good low temperature touch-up40136Synthemul® 40-136 Interior flat and satin finishes1150

64 2 0W 8.90Capable of formulating to near 0 g/L VOC; high scrub, low odor96083Synthemul® HS-200 Interior flat and satin finishes750

5554

70 -- --2-ButoxyEthanol

8.75 130-200 High gloss; good balance of hardness and flexibility; excellent shelf stability

14894Arolon® 559-G4-70 High gloss water-reducible baking finishes

65 44 --n-Propanol 8.35 3700-9800 High gloss; good balance of hardness and flexibility; excellent shelf stability

40425Arolon® 40-425 High gloss water-reducible baking finishes

45 18 --W 8.80 500

Capable of formulating to 150-200 g/L VOC; excellent adhesion to wood and concrete; compatible with many other resin systems

40423Synthemul® 40-423

Interior and exterior penetrating stains; concrete primers and sealers; blending resin for UROTUF® F97-MPW-33

aCryliCs (ConTinued)

commentSProduct % SolidS Solvent tg (°c)denSity

(lbS/GAl) APPlicAtionSProduct

codeviScoSity

(cPS) mfft (°c)

50 12 5W 8.70 550Capable of formulating to near 100-150 g/L VOC; excellent exterior durability, mechanical stability, and alcohol compatibility

40412Synthemul® 40-412General purpose exterior house paints and semi glosses; traffic paints

51 21 23W 8.80 500Capable of formulating to 150-200 g/L VOC; excellent block resistance; good wet adhesion; very good gloss development

40418Synthemul® 40-418-02 Interior and exterior semi gloss

47 12 10W 8.85 300 Extended open time, wide compatibility, excellent tensile and flex strengths

91826Synthemul® CA-100 Acrylic cement modifier for patching mortars

50 -15 --W 8.70Very good elongation, good tensile strength, and excellent water resistance; low moisture vapor permeability

96062Arolon® 96-062High build elastomeric coatings; vertical concrete coatings; exterior finishes

500

100% ACryLiC emuLSionS

eLASTomeriC ACryLiC emuLSionS

wATer-reduCiBLe ACryLiC reSinS

5756

Linseed 1 max X8 2000 7Urethane hybrid (linseed uralkyd) for fast-setting and drying systems; low water pickup14947Urotuf® F34-100

Fatty Acid 15 - 24 X XNV=50%

TOL6 - 11 6 Specialty solvent-based coatings91552-01Beckosol® 91552-01

Linseed 20 max X4 80 10Grind vehicle for paste pigment dispersions as sole vehicle23301Beckosol® L630 I

Linseed 10 max X7 735 10 General-purpose 7 linseed23308Beckosol® VPW 2037

Soya 12 max X1 30 6 General-purpose 1 soya91572Beckosol® 91572

Soya 8 max X3 50 6 General-purpose 3 soya91845Beckosol® 91-845

Linseed 10 max X9 6500 8 General-purpose 9 linseed91704Beckosol® 91704

Linseed 12 max X3 50 10 General-purpose 3 linseed23304Beckosol® L680 I

Linseed 10 max X5 150 10 General-purpose 5 linseed23310Beckosol® VPW 2097

Soya 12 max X9 6500 6 General-purpose 9 soya91706Beckosol® 91706

Soya 12 max X7 550 6 General-purpose 7 soya91843Beckosol® 91-843

Soya 10 max X6 315 10Specialty 6 soya; especially good for carbon blacks; low tack; excels in heatset systems23307Beckosol® S730 FSB

graPhiC arTs resins

ALKYDS

Product oil tyPe body Acid vAlue PASte ink

SPeciAlity coAtinG

viScoSity(StokeS)


GArdner color

liquid ink

5958

1 10 X X X70/30 5000 5

Reactive-modifying polyester acrylate that increases flexibility in cured films and can increase adhesion on some substrates without causing loss of cure speed; typical use rate is up to 15% in epoxy-acrylate systems; non-yellowing

23354Aroplaz® VE011 70 TPGDA

2 3 X X X100/0 2300 2 Low-viscosity epoxy-acrylate18506Epotuf® 18506

49 13 X2 350 Milky whiteSpecialty WB acrylic that adds immediate water resistance to WB film inks; excellent grease resistant properties; most water-resistant acrylic we offer

14902Arolon® 820-W-49

2 2 X X X75/25 14000 2 75% cut of epoxy-acrylate in TPGDA45002Epotuf® 3000 25 TPGDA

70 59 X X30 50000 8 GardnerOxidative cure WB epoxy ester; industry standard for high-performance chemical resistant poly-coated folding carton applications for milk cartons, juice boxes, etc

91263Epotuf® 91263

2 2 X X X100/02500

(65°C) 2 General-purpose epoxy-acrylate91275Epotuf® 91275

2 2 X X X100/02500

(65°C) 2 General-purpose epoxy-acrylate45000Epotuf® 3000

42 19 X0 500 Milky whiteSpecialty WB acrylic for WB film inks; excellent grease resistant properties; faster water resistance development than conventional acrylics

96036Arolon® 847-W-42

3 3 X X100/0 27500 5 Good pigment dispersion oligomer 45100Epotuf® 3400

2 2 X X X85/15 3000 (65°C)

2Difunctional aliphatic urethane-acrylate for non-yellowing application; adds toughness and flexibility to systems

--Epotuf® 4200 15 TPGDA

graPhiC arTs resins (ConTinued)

ENERGY CURABLE

WATER-BASED

Product oliGomerfunctionality

oliGomer/monomer composition

Acid vAlue PASte ink

SPeciAlity coAtinG

viScoSity(cPS)


GArdner color

liquid ink

Product % SolidS Wt. % voc Acid vAlue PASte ink

SPeciAlity coAtinG

viScoSity(cPS)

commentSProduct code APPeArAnce liquid

ink

6160

71 MDI XETAC/ETOH 550 2High-performance, adhesion-promoting, plasticizing urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

91624Urotuf® 91-624

130-150 85-105 X8.4-11.4 75-95 12 (50% in toluene)

High-performance, adhesion-promoting, plasticizing urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

--Resafen® 17620

78 TDI XETAC 2100 1General-purpose, economical plasticizing urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

91633Urotuf® 91-633

26001Resafen® 1410 85-95 2 max X X-- -- 3 (50% in alcohol)

General-purpose, economical plasticizing urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

78 MDI XETAC 3800 1General-purpose, TDI-free plasticizing urethane for nitrocellulose-based flexo and gravure inks; does not degrade heat resistance; ultra-low organo-tin

91634Urotuf® 91-634

75 MDI XPAC 1450 2

Urotuf 91801-00 is a 75% solids, tin-free, TDI-free polyurethane resin solution reduced in n-Propyl acetate. It is designed for use as a plasticizer in ink systems for flexible packaging

91801Urotuf® 91-801

75 TDI XPAC 470 2

Urotuf 91821-00 is a 75% solids, tin-free, polyurethane resin solution reduced in n-Propyl acetate. It is designed for use as a plasticizer in ink systems for flexible packaging

91821Urotuf® 91-821

graPhiC arTs resins (ConTinued)

SOLVENT-BASED URETHANES

HARD AND KETONIC RESINS

Product % SolidS SolventiSocyAnAte

tyPePASte

inkSPeciAlity coAtinG

viScoSity(cPS)


GArdnercolor

liquid ink

ProductmeltinG

Point (°c)

HePtAnetolerAnce

(ml)

Acid vAlue PASte ink

SPeciAlity coAtinG

viScoSity (Sec, din 4, 20°c) 50% in toluene


GArdnercolor

liquid ink

Company DescriptionReichhold is the world’s largest supplier of unsaturated polyester resins for composites and a leading supplier of coating resins for a wide variety of markets and applications. With its world headquarters in Research Triangle Park, North Carolina, USA along with four technology centers and nineteen manufacturing sites spread around the world, Reichhold has the widest global reach of any resin supplier today. Innovations combined with state-of-the-art manufacturing facilities and a sales and distribution network that is far reaching means that Reichhold can offer focused solutions for your needs.

Core TechnologiesReichhold offers one of the most comprehensive ranges of technology in the coatings industry today from traditional alkyds, polyesters, polyurethanes, epoxies and acrylics to more cutting-edge technologies such as alkyd latexes, water-borne oil modified urethanes and water-borne epoxy curing agents. More importantly, Reichhold doesn’t just sell these technologies; they engineer them, tailor them and offer ongoing support through specialized technical experts.

Coating Markets ServedFor over 80 years, Reichhold has been a pioneer in creating innovative technologies to help coatings formulators meet their customers’ most demanding applications. Whether developing the latest in high-performance protective coatings or low-VOC architectural paints, formulators can look to Reichhold for a wide array of technologies used in a variety of markets and applications in the coatings industry.

Architectural Coatings: Interior/exterior wall paints & primers Trim enamels Wood floor finishes DIY stains & varnishes Deck coatings Concrete porch & garage paint Metal finishes

Industrial / Protective Coatings: Industrial maintenance Marine Aerospace Agricultural equipment Automotive refinish

OEM Coatings: Wood cabinetry & furniture Factory-applied wood finishes General metals Heavy machinery & equipment Metal furniture & office equipment Coil & can Plastic substrates

BrandsReichhold’s coating product line includes water-borne, solvent borne, 100% solids liquid and powder coating resins that are sold under the following trade names:

Value Added ServicesAt Reichhold, products are constantly tested and technology refined so as to provide customers with high performing products. Each of the global technology centers is equipped to measure physical and performance properties based on standardized test methods, and complete analytical services are available at the world headquarters and technology center. Additionally, Reichhold takes every opportunity to test products in real-world applications. Along with quality products, Reichhold offers formulation recommendations and technical support for the optimization of coating performance.

Global Technology CentersReichhold World Headquarters – United States2400 Ellis RoadDurham, NC 27703Tel: +1 919 990 7500 Fax: +1 919 990 7749Website: www.reichhold.com

Mexico Tel: +52 712 122 9500 Fax: +52 712 122 0328Brazil Tel: +55 11 4795 8136 Fax: +55 11 4727 6382EMEA Tel: +47 33448600 Fax: +47 33448701

Reichhold EVErywhErE PErformancE mattErs

beckoSol® Solvent Borne Alkyds

beckoSol Aq® Alkyd Latexes

kelSol® Water-borne & Water-Reducible Alkyds

AmberlAc® Modified Alkyds & Copolymers

AroPlAZ® Polyesters

urotuf® Urethanes

ePotuf® Epoxies & Epoxy Curing Agents

Aroflint® Non-Isocyanate 2K Systems

Arolon® Styrenated & Solution Acrylics, Acrylic Polyols

SyntHemul® Non-Styrenated & Vinyl Acrylics

reSAfen® Phenolics

fine-clAd® Powder Coating Resins

fine-tone® Digital Printing Ink Resins

solvenT legendA1 Ethoxy Ethyl AcetateA4 n-Butyl AcetateA5 Butoxy Ethyl AcetateA6 Methoxy Propyl AcetateA7 Ethoxy Ethyl Propionate A100 Aromatic 100 SolventA150 Aromatic 150 SolventB n-Butyl AlcoholB1 Isobutyl AlcoholB2 Sec-Butyl AlcoholD Isopropyl AlcoholE Ethyl AlcoholE1 ParachlorobenzotrifluorideE2 t-Butyl AcetateEB Ethyl BenzeneG Glycols and Glycol EthersG2 Propoxy PropanolG3 Propylene Glycol Monomethyl EtherG4 2-Butoxy EthanolG5 Diethylene Glycol n-Butyl EtherG8 Dipropylene Glycol Dimethyl EtherIBIB Isobutyl IsobutyrateK1 Methyl Ethyl KetoneK2 Methyl Isobutyl KetoneK3 Methyl n-Propyl KetoneK4 Methyl Amyl KetoneK6 CyclohexanoneM Mineral SpiritsMO Oderless Mineral SpiritsNMP N-Methyl-2-PyrrolidoneT TolueneV VM&P NaphthaW WaterX Xylene

The information herein is general information designed to assist customers in determining whether our products are suitable for their applications. Our products are intended for sale to industrial and commercial customers. We require customers to inspect and test our products before use and to satisfy themselves as to contents and suitability for their specifi c applications. We warrant that our products will meet our written specifi cations. Nothing herein shall constitute any other warranty express or implied, including any warranty of merchantabilityor fi tness for a particular purpose, nor is any protection from any law or patent to be inferred. All patent rights are reserved. The exclusiveremedy for all proven claims is limited to replacement of our materials, and in no event shall we be liable for special, incidental, or consequential damages. Reproduction of all or any part is prohibited except by permission of authorized Reichhold personnel.

Copyright © 2012 Reichhold, Inc.

For more information on Reichhold’s complete line of products contact your Reichhold sales representative or call the Coatings Technical Support Line at (800) 431-1920.

Reichhold, Inc.World Headquarters and Technology CenterP.O. Box 13582Research Triangle Park, NC 27709(919) 990-7500 (local) or (800) 431-1920 (toll-free)www.reichhold.com

REICHHOLDreichhold.com/brochures/coatings/WEB-Reichhold... · primers, asphalt and concrete...

Documents

Transcript of REICHHOLDreichhold.com/brochures/coatings/WEB-Reichhold... · primers, asphalt and concrete...