ASIC Design Flow
-
Upload
asawari-dudwadkar -
Category
Documents
-
view
16 -
download
3
Transcript of ASIC Design Flow
ASIC Design Flow
The VTVT ASIC design flow using standard cell libraries consists of using a VHDL or Verilog script to generate an entire design schematic and layout views for manufacturing. The design schematic and layout are combinations of the standard cells available on the VTVT site.
Each step of the flow links to a tutorial using VTVT Lab’s vtvt_tsmc250 standard cell library from TSMC 0.25 microns.
The design flow starts by implementing a VHDL script that describes the design functionality. The script is simulated then synthesized into a verilog netlist. The netlist is imported into Cadence ICFB as a schematic view and into Cadence SOC Encounter to generate a place-and-route layout view. Once the layout view is imported into Cadence ICFB, LVS is run to verify that the synthesized schematic and layout match. The design is then ready for chip submission.
Comments to: [email protected] Last Updated: June 30, 2008
VLSI Tools TutorialsThe following tutorials show setup files, basic features and simple examples of Cadence, Synopsys and HSPICE tools for VLSI design.
Cadence Tutorial for Cadence tools Synopsys Tutorial for Synopsys tools Hspice Tutorial for hspice simulator SystemC Tutorial for SystemC simulation and synthesis tools
Mixed-Signal Tutorial for mixed-signal simulation within Virtuoso AMS Environment