Asia Telecom and Media Corp Brochure

“ ”We have built our company on trust and realiability

FIBER OPTICAL CABLE

FIBER OPTICAL ACCESSORIES

FIBER OPTICAL DISTRIBUTION CABINET

FIBER OPTICAL EQUIPMENT

Fiber Core

ITU-T G652D Standard

Page 1

Fiber Core

ITU-T G657A1 Standard

Page 2

Fiber Optic Pigtails

Asia Telecom provide wide degree flexibility on fiber pigtails, including single-mode, multimode and 10, 100Gbps50/125um OM3, OM4 types, simplex fiber, duplex, 4 fibers, 6 fibers, 8 fibers, 12 fibers, 24 fibers, 48 fibers and so on.These fiber pigtails can be with fan-out kits and full compliant to Telcordia, EIA/TIA and IEC standards

Page 3

Singlemode Fiber Optic Pigtails Multimode Fiber Optic Pigtails Multicolor Fiber Optic Pigtails

Fanout Fiber Optic Pigtails Breakout Fiber Optic Pigtails Tactical Fiber Optic Pigtails

Model: ATM-PT XX XXX XX XXX(1) (2) (3) (4)

Model: ATM-PT XX XXX XX XXX

(1) Fiber type:Singlemode: SMMultimode: OM1/OM2/OM3/OM4

(2) Connector type:SCU/SCA/LCU/LCA/FCU/FCA/MPO/MTRJ...

Model: ATM-CT XX XXX XX XXX

(3) Cable diameter:09 = 0.9mm20 = 2.0mm

(4) Cable length:15 = 1.5m30 = 3m

Each Pigtail is stored in a plastic bag withstandard information markup like: Product type,Insertion loss, Return loss...Each connector has dust protection cap.Carton box will be applied with big quantity

(1) (2) (3) (4) (1) (2) (3) (4)

Model: ATM-PT XX XXX XX XXX(1) (2) (3) (4)

Model: ATM-PT XX XXX XX XXX Model: ATM-CT XX XXX XX XXX(1) (2) (3) (4) (1) (2) (3) (4)

Packaging

Fiber Optic Patchcords

Asia Telecom manufactures and supplies standard and custom length 50/125, 62.5/125 and OEM equivalentmode conditioning fiber optic patch cords for 1000BASE-LX/LH Gigabit Ethernet (1300nm long wavelength)applications installed into existing multimode cable plants. These specialized cords help avoid Differential Mode Delay(DMD) effects that can occur when long wave transceiver modules operate at both single-mode and multimode

Page 4

Singlemode Fiber Optic Patchcords Multimode Fiber Optic Patchcords Rugged Fiber Optic Patchcords

Fanout Fiber Optic Patchcords Breakout Fiber Optic Patchcords Tactical Fiber Optic Patchcords

(1) Fiber type:Singlemode: SMMultimode: OM1/OM2/OM3/OM4


(3) Cable diameter:09 = 0.9mm20 = 2.0mm

(4) Cable length:15 = 1.5m30 = 3m

Model: ATM-PC XX XXX/XXX XX XXX(1) (2) (3) (4)

Model: ATM-PC XX XXX/XXX XX XXX(1) (2) (3) (4)

Model: ATM-RC XX XXX/XXX XX XXX(1) (2) (3) (4)

Model: ATM-FC XX XXX/XXX XX XXX(1) (2) (3) (4)

Model: ATM-BC XX XXX/XXX XX XXX(1) (2) (3) (4)

Model: ATM-TC XX XXX/XXX XX XXX(1) (2) (3) (4)

Each Patchcord is stored in a plastic bag withstandard information markup like: Product type,Insertion loss, Return loss...Each connector has dust protection cap.Carton box will be applied with big quantity

Packaging

PLC Splitter

As one of the key components for GPON FTTx networks, optical splitter can be placed in the Central Office or inone of the distribution points (outdoor or indoor) because the FBT splitters are highly stable for multiport optical signalsplitting with low insertion loss. FBT couplers are designed for power splitting and tapping in telecommunicationequipment, CATV network, and test equipment

Page 5

Minitube PLC Splitter ABS PLC Splitter

Ordering Information(1) 102 = 1x2; 104 = 1x4 ....:

(2) 2 = G652; 7 = G657A

(3) 025 = 250 μm; 090 = 0.9mm; 200 = 2.0mm

(4) Connector type SCA/SCU/FCA/FCU/LCU/LCA ...

(5) Cable length 15 = 1.5m; 30 = 3m...

Model: ATM-SP XXX X XXX XXX/XXX XXX(1) (2) (3) (4) (5)

Packaging

Model: ATM-SP XXX X XXX XXX/XXX XXX(1) (2) (3) (4) (5)

Fiber Optic Bulk Cables

With a wide range of quality optical fiber cables with detailed specifications displayed for your convenientselecting. Per foot price of each fiber cable is flexible depending on the quantities of your order, making your cost of largeorder unexpected lower. Customers can also have the flexibility to custom the cable plant to best fit their needs. Only fibercable that meets or exceeds industry standards is used to ensure quality products with best-in-class performancewavelengths.

Page 6

900µm Tight Buffer Optic Cable

ATM-OCTB- XX XX XX

(1) Fiber type:Singlemode: SMMultimode: OM1; OM2; OM3; OM4

(2) Fiber Count:01; 02; 04...(3) Cable diameter:

09: 0.9mm20: 2.0mm30: 3.0mm

PVC/LSZH Sheath

Fiber Cladding

Fiber

Fiber Coating

900μm Tight Buffer Cable are basically 250μm coatedfibers covered with a thick layer of hard plastic, whichadds protection. It just adds a 900μm hard plastic layerover the 250μm soft plastic coating. Asia Telecomsupplies single-mode and multimode 900μm tightbuffer fiber cables in systems such as WDM, opticalswitching, optical amplifier, DWDM, TDM, add/drops,monitors, and cross connect.

Packaging

900 standard packaged as 12 or 24 km per drum. We also can package follow customer’sμm Tight Buffer Cablerequirement.

Order Information

(1) (2) (3)

Fiber Optic Bulk Cables

With a wide range of quality optical fiber cables with detailed specifications displayed for your convenientselecting. Per foot price of each fiber cable is flexible depending on the quantities of your order, making your cost of largeorder unexpected lower. Customers can also have the flexibility to custom the cable plant to best fit their needs. Only fibercable that meets or exceeds industry standards is used to ensure quality products with best-in-class performancewavelengths.

Page 7

2.0/3.0mm Tight Buffer Optic Cable

ATM-OCTB- XX XX XX

(1) Fiber type:Singlemode: SMMultimode: OM1; OM2; OM3; OM4

(2) Fiber Count:01; 02; 04...(3) Cable diameter:

09: 0.9mm20: 2.0mm30: 3.0mm

PVC/LSZH Sheath

Kevlar yarn

900μm Tight Buffer

2.0m widelym/3.0mm Tight Buffer Optic Cable areused for patchcord with simplex, duplex or multifibertype depend on customer’s needed. All productcomplied with or exceed standard:

- ITU-T G652.D- ITU-T G651.1 OM1 OM2 OM3 Om4- ITU-T G657.A- IEC60793-2-10 typeA1a.1/A1b OM1/OM2-IEC60793-2-10 typeA1a.2 Om3-IEC60793-2-10 typeA1a.3 OM4

Packaging

Standard drum: 3km - 5kmWe also can package follow customer’s requirement.Cable sheath content: Brand name, Cable type, Cable length ...We can also offer customize printing content.

Order Information

(1) (2) (3)

Fiber Optic Adapters

Fiber optic adapters are used to provide a cable to cable or cable to equipment fiber optic connection. We supplya wide range of mating sleeves and hybrid adapters, including special male to female hybrid fiber optic adaptor

Page 8

SC Adapters LC Adapters FC Adapters

ST Adapters MPO Adapters Tactical Adapters

(1) Fiber type:Singlemode: SMMultimode: MM


Model: ATM-A XX XXX(1) (2)

50 adapter will be packaged in a plastic traywith standard information markup like: Producttype, Insertion loss, Return loss...Each adapter has dust protection cap.Carton box will be applied with big quantity

Packaging






Others

Page 9

Splice Protection Sleeve

ATM-SPS XXXX = Length mm

50 adapter will be packaged in a plastic traywith standard information markup like: Producttype, Insertion loss, Return loss...Each adapter has dust protection cap.Carton box will be applied with big quantity

Packaging

DescriptionSplice protection sleeve is made up of cross linked polyolefin heat-shrinkable tubes,hote melt tubes and Stainless steel needle

FeaturesProtect connection point,improve the mechanical strength,it is mostreliable way to protect the fusion.Easy to operate,reducing the risk of fiber damage during installationTransparent tube,it is easy to see the status of fiber optical closure

Min.shrinks temperatuer:120 ,shrink very fast and very easy to℃

installationWork temperature high (-55°C~100°C), widely usedSealing structure let closure have good resistance to temperature andhumidity performance.Compatible with most fiber splice tray.

Order Information

Rack mount ODF

A cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. Itprovides an economical way of splicing fiber cables in communication room or existing equipment racks where space isconstrained.

Feature:Standard size, light weight and reasonable structureFC, SC, ST, LC adapter patch panel for optionFront access panel design for easy operationSuitable for 19’’ or 23’’ standard optic distribution

cabinetsCapacity 12, 24, 48, 96 ... fibers4 fiber cable entry ports at rear sideWhite or black color

Application:Telecommunications subscriber loopFiber to the home (FTTH)LAN/ WANCATV

Page 10

Rack mount ODF

Order information:

ATM-ODF-RF XX

(1) Fiber Count: 12; 24; 48 ....

(1)

Wall mount ODF

Outdoor Wall-mount Fiber Optic Distribution Frame is mainly used for connecting the outdoor optical cables,optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of thelines.

Outdoor Wall-mount Fiber Optic DistributionFrame is mainly used for connecting the outdoor opticalcables, optical patch cords and optical pigtails. It can bewall mounted or pole mounted, and facilitates the test andrefit of the lines.

Feature:With plastic plates can manage both single fiber

and ribbon & bundle fiber cablesFC, LC, SC, ST output interfaces optionalLarge working space to integrate the pigtail,

cablesand adaptersMade of cold-rolling steel, static spreading-plastic,

small dimension and exquisite, easy for operationSpecial design ensures the excess fiber cords and

pigtails in good orderInner components as follows:+ Fiber Optic Splice Tray: storing fiber connectors

(together with the protective components) and the sparefibers

+ Fixing Device: used for fixing the fiber protectivetubes, the fiber reinforced cores and the distributionpigtails

+ The brim of the box is sealed


Page 11

Wall mount ODF

Order information:

ATM-ODF-OW XX X

(1) Fiber Count: 12; 24; 48 ....(2) Splice tray type:

A: Splice tray at both sideB: Splice tray at one side

(1) (2)

Fiber Optic Terminal Box

FTTH model of Fiber Optic Terminal Box is developed by our company for application of FTTH. The box is lightand compact, especially suitable for protective connection of fiber cables and pigtails in FTTH.

Feature:This box could be used for wall-mounted

application;The base and cover of the box adopts self-clip

method, which is easy and convenient to open andclose;

Could be used for adaptors such as SC, FC,E2000 etc.;

The max capacity is 4 fibers;

Environmental Temperature: -25 ~40 ;℃ ℃

Dimesion: 150x110x30 mm

Application:Telecommunications subscriber loopFiber to the home (FTTH)LAN/ WAN

Page 12


Order information:

ATM-OTB-C04


The fiber optic terminal box is suitable for optical fiber splitting/splicing using. It is reasonable design for fiberarrangement, and its bend radius is more than 30mm.

Feature:Industry Standard User Interface, be made of

ABS plastic.Can accommodate 1x4,1x8,1X16, 2x4,2x8 &

2x16 PLC steel tube splitter.Rainfall resistant, outdoor using.Can load 24pcs LC, FC, ST, SC … adapters.Wall mounting and pole mounting application.2pcs cable entry ports; cable can be entry

without cutting.24pcs exit ports for FTTH drop cable.


Page 13


Order information:

ATM-OTB-0216

Fiber Optic Splice Closure

ATM-FOSC-H002S consists of one set of elastic seal fitting, based on an advanced formula, is made of injection-molded,high quality elastic sealing material by numerical control equipment. It is installed between FOSC housing and insertplates.

Feature:

Up-down bisection,horizontal type4 port inlet/outlet12 cores total capacitySlide-in-lock design,over 90 opening angle trayElastic integrated seal ensure tightening fitHousing provide fire resistant,waterproof,and quakeproof for splices while handingOperating Temperature: -40 ~ +65CCable diameter: Max 15mm

Application:

Installation:aerial,underground,wall,hand-hole and duct-mounting

Page 14


Order information:

ATM-FOSC-H002S

Fiber Optic Splice Closure

ATM-FOSC-H005 consists of one set of elastic seal fitting, based on an advanced formula, is made of injection-molded,high quality elastic sealing material by numerical control equipment. It is installed between FOSC housing and insertplates.

Feature:

Up-down bisection,horizontal type4 ports inlet/outlet12~96 cores total capacitySlide-in-lock design,over 90 opening angle trayElastic integrated seal ensure tightening fitHousing provide fire resistant,waterproof,and

quakeproof for splices while handingOperating Temperature: -40 ~ +65CCable diameter: 7mm - 25mm

Application:

Installation:aerial,underground,wall,hand-holeand duct-mounting

Page 15


Order information:

ATM-FOSC-H00X

Asia Telecom and Media Corp Brochure

Business

Transcript of Asia Telecom and Media Corp Brochure