ASIA-222 Test Fail Report 68140910435

11
SEARS HOLDINGS GLOBAL SOURCING LTD TEST REPORT Bureau Veritas Consumer Products Services (BD) Ltd. Plot # 130 , DEPZ Extension Area Ganakbari , Savar , Dhaka , Bangladesh Tel : 88-02-7701464-6 Fax : 88-02-7701463 E-mail : [email protected] This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://cps.bureauveritas.com and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. C/N (6814)091-0435/MC Technical Report: (6814)091-0435 Page 1 of 11 April 8, 2014

Transcript of ASIA-222 Test Fail Report 68140910435

Page 1: ASIA-222 Test Fail Report 68140910435

SEARS HOLDINGS GLOBAL SOURCING LTD TEST REPORT

Bureau Veritas Consumer Products Services (BD) Ltd. Plot # 130 , DEPZ Extension Area Ganakbari , Savar , Dhaka , Bangladesh Tel : 88-02-7701464-6 Fax : 88-02-7701463 E-mail : [email protected]

This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://cps.bureauveritas.com and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

C/N (6814)091-0435/MC

Technical Report: (6814)091-0435

Page 1 of 11 April 8, 2014

Page 2: ASIA-222 Test Fail Report 68140910435

SEARS HOLDINGS GLOBAL SOURCING LTD TEST REPORT

C/N (6814)091-0435/MC

TO : SEARS HOLDINGS GLOBAL SOURCING LTD

51/F OFFICE TOWER, LANGHAM PLACE 8 ARGYLE STREET MONGKOK KLN HONG KONG ATTN : OPHELIA CHUNG CC : ROSITA YEUNG CC : HASAN TANVIR FASHION WEARS LTD.

LAB NO.: (6814)091-0435 FORM NO.: / DATE IN: April 02, 2014 MODIFIED DATE IN: April 03, 2014 DATE OUT: April 08, 2014 STORE: KMART DEPARTMENT: 24 BUYER: STARGATE

APPARELS INC. SOURCE: Domestic Orders NO. OF WORKING DAYS: 05 PAGE 2 OF 11

OVERALL RATING

APPROVED, acceptable to ship. APPROVED WITH COMMENTS, acceptable to ship this time, but expect

running changes.

CORRECTIVE ACTION REQUIRED, need to improve and retest. REJECTED, not acceptable. X

** Please contact [email protected] if there is other question related to this report

Brand: ROUTE 66 Season: 5014 Vendor: HASAN TANVIR FASHION

WEARS LTD. Agent: /

Fabric Supplier/Mill: KDC Factory/Manufacturer: HASAN TANVIR FASHION WEARS LTD,

Factory Location: GAZIPUR Factory Country: BANGLADESH Country of Origin: BANGLADESH Contract No.: NS1070 Style / Item #: SP0-B70202 Total Order Quantity: 4886 PIECES Sample Description: SID SLIM STRAIGHT Color: DARK WASH Claimed Fabric Weight: 10.5 OZ/SQ.YD Submitted Size: INFANTS/CHILDREN,

OTHERS: 03-09 Construction: 10+8X600D/68X52 1st Shipdate: 05/15/14 Bal Shipdate: / End Use: DENIM PANT Inspection Office: DHAKA Sample Status PRE-PRODUCTION GARMENT Product Category GARMENT Test Requested FULL PACKAGE (PRE-PRODUCTION GARMENTS) Previous Report No. (6814)033-0279

Page 3: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 3 of 11

C/N (6814)091-0435/MC

Submitted Fiber Content

60%COTTON 40%POLYESTER EXCLUSIVE OF DECORATION

Actual Fiber Content / Suggested Fiber Content

REFER TO REPORT NO. (6814)033-0279 & BASED ON SUBMITTED SAMPLE 60%COTTON 40%POLYESTER EXCLUSIVE OF DECORATION

Submitted Care Instruction(s)

WASH BEFORE WEARING, MACHINE WASH COLD, WITH LIKE COLORS, ONLY NON-CHLORINE BLEACH WHEN NEEDED, TUMBLE DRY LOW, WARM IRON IF NEEDED.

Suggested Care Instruction(s)

REFER TO REPORT NO. . (6814)033-0279 WASH BEFORE WEARING, MACHINE WASH COLD, WITH LIKE COLORS, ONLY NON-CHLORINE BLEACH WHEN NEEDED, TUMBLE DRY LOW, WARM IRON IF NEEDED.

TEST PROPERTY APP AWC CAR REJ COMMENTS FABRIC WEIGHT X DEFECT/ EVENNESS OF COLOR X DIMENSIONAL CHANGES OF GARMENTS AFTER HOME LAUNDERING

X

APPEARANCE AFTER CARE X SIDE SEAM TWISTING X FAILURE IN SEWN SEAMS: WOVEN APPAREL

X

POCKET REINFORCEMENT X BUTTON/ SMALL PARTS ATTACHMENT STRENGTH

X

HOLDING STRENGTH OF SNAP FASTENERS

X

USE & ABUSE (SMALL PART): TORQUE TEST

X

BUTTON IMPACT RESISTANCE X COLORFASTNESS TO WATER X pH IN TEXTILES X CHILDREN SAFE GARMENT REVIEW X SEE COMMENT CPSIA TOTAL LEAD CONTENT IN SUBSTRATES

X SEE COMMENT

CPSIA TOTAL LEAD IN SURFACE COATING

N/A(NOT APLICABLE)

PHTHALATES - DEHP, DBP, BBP, DNOP, DINP, DIDP, DnHP: BVCPS

X

LABELING REVIEW: CARE X LABELING REVIEW: FIBER X COMMENT: 01. CPSIA TOTAL LEAD CONTENT IN SUBSTRATES & CHILDREN SAFE GARMENT REVIEW:

THE SUBMITTED SAMPLES DEMONSTRATES UNSATISFACTORY RESULT IN CPSIA TOTAL LEAD CONTENT IN SUBSTRATES TEST ACTUAL SEE DATA* SHEET WHICH AFFECTS ON CHILDREN SAFE GARMENT REVIEW)

( REJECTED)

Page 4: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 4 of 11

C/N (6814)091-0435/MC

BUREAU VERITAS

CONSUMER PRODUCTS SERVICES (BANGLADESH) LTD.

MD. RAKIBUR RAHAMAN LABORATORY MANAGER REMARKS:

1. This report is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our

name or trademark, is permitted only with our written permission.

2. Our report is limited to the test samples identified herein. The results set forth in this report are not necessarily indicative or

representative of the statistical quality or characteristics of the lot from which a test sample was taken or any similar or identical product

unless specifically and expressly noted.

3. Our report includes all the tests requested by you and the results thereof. You shall have thirty days from receipt of this report to request

additional testing of the samples or to notify us of any errors or omissions relating to our report; provided, however, such notice shall be

in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall

constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents.

Page 5: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 5 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

FABRIC WEIGHT(ASTM D3776, OPTION C) OZ / SQ. YD 10.2 -5 TO +5 % G. / SQ. M 346 AS CLAIM 10.5

OZ/SQ.YD

DEFECT/ EVENNESS OF COLOR(VISUAL) NO ADVERSE EFFECTS NO ADVERSE

EFFECTS

DIMENSIONAL CHANGES OF GARMENTS AFTER HOME LAUNDERING(AATCC 150) -3.0 TO +1.5 %

MODIFIED, TIDE DETERGENT, 3 WASHES,3 DRY,NORMAL CYC LE AT 27 DEGREE CELSIUS (80 FAHRENHEIT), TUMBLE DRY LOW, 4-LBS LOAD

ORIGINAL (IN.)

AFTER WASHED (IN.)

SHRINKAGE (%)

TOTAL LENGTH 15.4 15.1 -1.9% WAIST 9.5 9.4 -1.1% FRONT RISE 6.4 6.3 - 1.6% BACK RISE 6.8 6.6 -2.9% INSEAM 8.8 8.6 -2.3% LEG OPENING 5.0 5.0 0.0% SEAT WIDTH 10.9 10.8 -0.9% (+) DENOTES ELONGATION (-) SHRINKAGE

APPEARANCE AFTER CARE (CPSD-SL-31055-MTHD) SUBJECTIVE, MACHINE WASH COLD, NORMAL CYCLE, TUMBLE DRY LOW, AFTER 3 WASHES COLOR CHANGE 3.5 MIN. GRADE 3.0 SELF - STAINING 4.5 MIN. GRADE 4 .0 PILLING AND FUZZING HAIR 4.0 MIN. GRADE 4.0 SEAM PUCKERING SATISFACTORY SATISFACTORY ANY OBSERVED DEFECTS SATISFACTORY

WARM IRON(1500 C):SAFE SATISFACTORY

SIDE SEAM TWISTING(CPSD-SL-31055-MTHD SECTION 9.7, SUBJECTIVE, MACHINE WASH COLD, NORMAL CYCLE, TUMBLE DRY LOW, AFTER 3 WASHES)

-4.0 TO +4.0%

SIDE SEAM TWIST (IN.)

TOTAL LENGTH (IN.) SPIRALITY (%)

AS RECEIVED 0.0 14.4 0.0% AFTER WASH 0.0 14.1 0.0%

Page 6: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 6 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

FAILURE IN SEWN SEAMS: WOVEN APPAREL (ASTM D1683)

SEAM STRENGTH (LBS.) MODE OF

FAILURE Test Data Requirement

SIDE 46.6 45.0 STB WAIST 132.2 45.0 STB SEAT 292.8 45.0 FR INSEAM 219.5 45.0 STB CROTCH @ INSEAM 78.3 45.0 STB LEG OPENING 125.6 45.0 FR ZIPPER STRESS AREA 31.6 20.0 STB REMARKS: NST - NO SEAM STRENGTH NOTED DUE TO SEAM SLIPPAGE OCCURRING. NSS - NO 0.25” SEAM SLIPPAGE NOTED * - FAILED RESULT STB – SEWING THREAD BREAKAGE FRS – FABRIC RUPTURE AT SEAM FR – FABRIC RUPTURE AT PLACES OTHER THAN JAW OR AT SEAM TPO – COMPLETE YARN PULL OUT WITHOUT YARN BREAKAGE OR SEWING THREAD BREAKAGE

POCKET REINFORCEMENT (ASTM D1683 MODIFIED)

SEAM STRENGTH (LBS.) MODE OF FAILURE

Test Data Requirement

FUNCTIONAL SIDE POCKET 79.4 20.0 FR NON - FUNCTIONAL BACK POCKET 37.0 15.0 FRS REMARK: NST – NO SEAM STRENGTH NOTED DUE TO SEAM SLIPPAGE OCCURRING. NSS – NO SEAM SLIPPAGE NOTED. STB – SEWING THREAD BREAKAGE FRS – FABRIC RUPTURE @ SEAM SD – SLIDER DETACHED FB – FABRIC BROKEN

FR – FABRIC RUPTURE SS – SEAM SLIPPAGE AT 1/4 INCH TB – THREAD BREAKAGE SF – SEAM FAILURE

Page 7: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 7 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

BUTTON/ SMALL PARTS ATTACHMENT STRENGTH (CPSD-SL-31023-MTHD) MIN. 15.0 LBS.

@ 10 SEC. (LBS. @ 10 SEC.) ZIPPER PULL: 15 LBS. @ 10 SEC,

ALL BUTTON: 15 LBS. @ 10 SEC, ELASTIC STRAP: 15 LBS. @ 10 SEC

* Remark

(TB)-THREAD BREAKAGE (FR)-FABRIC RUPTURE (BB)-BUTTON BREAKAGE

HOLDING STRENGTH OF SNAP FASTENERS(ASTM D7142, OPTION 2) (LBS.) STUD & SOCKET:15 LBS. @ 10 SEC MIN. 15.0 LB S.

@ 10 SEC.

USE & ABUSE (SMALL PART): TORQUE TEST (16 CFR 1500 51-53 section 8.8 - 8.9)

MIN. 4.0 IN-LBS. @ 10 SEC.

(IN-LBS. @ 10 SEC.)

ZIPPER CLOCKWISE 4 IN-LBS. @ 10 SEC. ANTI-CLOCKWISE 4 IN-LBS. @ 10 SEC.

BUTTON IMPACT RESISTANCE(CPSD-SL-31001-MTHD, 1.0 OZ STEEL BALL DROPPED AT 5.5 INCH HEIGHT)

(LBS.) NO BUTTON BREAKAGE, CRACKING OR CHIPPING

(OUT OF 10 BUTTONS) NO BREAKING OUT OF 10

COLORFASTNESS TO WATER(AATCC 107, MULTIFIBERS NO. 10) COLOR CHANGE 4.5 MIN. GRADE 4.0 SELF - STAINING 4.5 MIN. GRADE 4.5 COLOR STAIN ON ACETATE 4.5 MIN. GRADE 3.5 COTTON 4.5 MIN. GRADE 3.5 NYLON 4.5 MIN. GRADE 3.5 POLYESTER 4.5 MIN. GRADE 3.5 ACRYLIC 4.5 MIN. GRADE 3.5 WOOL 4.5 MIN. GRADE 3.5

pH IN TEXTILES(AATCC 81) pH VALUE 6.5 6.0 TO 8.0

Page 8: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 8 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

CHILDREN SAFE GARMENT REVIEW FAIL -MECHANICAL HAZARDS NO - DRAWSTRINGS AT NECK & HOOD ON SIZE 0 - 16 N/A - DRAWSTRINGS AT WAIST / BOTTOM ON AGE GRADES 0-16 : NOT

EXCEED 3” IN LENGTH OUTSIDE THE CHANNEL WHEN GARMENT IS EXPANDED TO ITS FULLEST WIDTH

N/A

-DRAWSTRING MUST BE BARTACKED AT CENTER BACK SO STRING CANNOT BE PULLED OUT. NO TOGGLES, KNOTS OR ATTACHMENTS AT THE FREE END OF THE DRAWSTRING

N/A

ATTACHMENT PASS

-BUTTON IMPACT TEST (ALL SIZE RANGE) PASS

-ZIPPER TORQUE TEST PASS

-LEAD CONTENT FAIL*

Page 9: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 9 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

Total Lead Content in Substrate - United States Consumer Product Safety Improvement Act (CPSIA) Section 101(a)(2)

Test Method : U.S. CPSC-CH-E1001-8.1 (Issued on June 21, 2010) or U.S. CPSC-CH-E1002-08.1 (Issued on June 21, 2010).

Acid digestion and analysis by Atomic Absorption Spectrophotometer

(AAS) or Inductively Coupled Plasma - Optical Emission Spectrometer (ICP-OES).

Test Item(s) Item Description

1 Dk. brown coated fake leather 2 Navy plastic button 3 Antique brass metal zipper puller 4 Antique brass metal zipper slider 5 Antique brass metal zipper teeth 6 Antique brass metal zipper top stopper 7 Antique brass metal zipper end stopper 8 Antique brass metal snap top 9 Silvery metal snap post 10 Silvery metal snap plug side 11 Silvery metal snap socket side

12 Golden metal o-ring (inside socket) 13 Navy zipper tape fabric

Maximum Allowable Limit : 100 PPM

Parameter Unit Result

Test Item(s) - 1 2 3 4 5 Total Lead (Pb) mg/kg 1070* ND 44.6 67.1 32.4

Parameter Unit Result

Test Item(s) - 6 7 8 9 10 Total Lead (Pb) mg/kg 35.6 29.5 21.7 18.2 21.7

Parameter Unit Result Test Item(s) - 11 12 13 Total Lead (Pb) mg/kg 21.6 24.2 ND

Note / Key :

ND = Not detected “>” = Greater than mg/kg = milligram(s) per

kilogram % = percent

1 % = 10000 mg/kg

Detection Limit (mg/kg): 10

Page 10: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 10 of 11

C/N (6814)091-0435/MC

TEST RESULTS TEST PROPERTY REQUIREMENTS

Total Lead Content - U.S. CPSC 16 CFR 1303: Remark: 1. The received sample(s) did not have surface coating. The lead content analysis on surface coating according to U.S. CPSC 16 CFR 1303 was not conducted. Phthalates Content:

Test Item(s) Item Description

I001 Dk. brown coated fake leather (at pocket) (additional)

Maximum Allowable Limit

: Each 0.1 %

Test Item(s) Result

Conclusion Detected Analyte(s) Conc. Unit

I001 DEHP: 0.005 % PASS

Note / Key :

ND = Not detected “>” = Greater than Conc. = Concentration % = percent 1 % = 10000 mg/kg mg/kg = milligram(s) per

kilogram Detection Limit (%) : Each 0.005

Remark :

- The list of phthalates is summarized in table of Appendix.

APPENDIX

List of Phthalates

No. Name of Analytes CAS-No. No. Name of Analytes CAS-No.

1 Butyl benzyl phthalate (BBP) 85-68-7 4 Di-n-octyl phthalate (DNOP) 117-84-0

2 Dibutyl phthalate (DBP) 84-74-2 5 Di-iso-nonyl phthalate (DINP) 28553-12-0

3 Di-2-ethylhexyl phthalate (DEHP) 117-81-7 6 Di-iso-decyl phthalate (DIDP) 26761-40-0

COLORFASTNESS RATING COLOR CHANGE

COLORFASTNESS RATING COLOR STAIN SELF STAINING

5 NEGLIGIBLE OR NO C HANGE 5 NEGLIGIBLE OR NO S TAINING 4 SLIGHTLY CHANGED 4 SLIGHTLY STAINED 3 NOTICEABLY CHANGED 3 NOTICEABLY STAINED 2 CONSIDERABLY CHANGED 2 CONSIDERABLY STAINED 1 MUCH CHANGED 1 HEAVILY STAINED

* INDICATES DOES NOT MEET THE REQUIREMENT ** INDICATES MARGINAL REQUIREMENT

Page 11: ASIA-222 Test Fail Report 68140910435

LAB NO: (6814)091-0435 Page 11 of 11

C/N (6814)091-0435/MC