ASI Global Partitions - NorthStar Sales
Transcript of ASI Global Partitions - NorthStar Sales
Floor Anchored
Perfect for low-ceiling washrooms.Sleek line across top of partitions adds amodern accent. Design and constructionensures easy installation. For concretefloors only, this style requires 2"minimum penetration into floor.Junior Height sizes are available.
Floor and Ceiling Anchored
This construction style is extremelystable and durable and is recommendedfor busy washrooms where abusivetreatment is prevalent and vandalresistance is critical. Requires concretefloor and structural ceiling supports.
Floor Anchored/Overhead Braced
Clean lines, modern appearance, andsolidly braced for new construction orrenovation, independent of floorcondition. The uniquepilaster construction,combines with anti-griphead rail bracing forstructural rigidity. Can be used withlight weight concrete or wood floors.
Ceiling Hung
Open design at the floor means easyaccess for better maintenance andreduced operating cost.
Goes hand-in-hand with wall-hung fixtures for full floor accessibility.Proper installation requires attachmentto structural ceiling support.
12ʺ/30cm
58ʺ147cm
83ʺ211cm
14ʺ/35cm
14ʺ/35cm
55ʺ140cm
Polymer All Other Materials
2
Global Styles
Phenolic - Color-Thru
Color-Thru Phenolic lives up to itsname, with surface color throughand through. This product is impact,scratch and graffiti resistant; it alsohas excellent screw holding powerand all the advantages of traditionalPhenolic performance. Available inall styles and attractive colors.
Powder Coated
High-tech quality at aneconomical price. Thermosettinghybrid powder finish ongalvannealed steel is highlyresistant to corrosion, grease,acids, caustics, mars and stains. Abroad range of contemporarycolors to complement any interior.Available in all styles.
3
Global Materials
Phenolic - Black Core
Holds up even under severemoisture conditions from showers,pools and saunas, or whenmaintenance includes hosing downtoilet partitions. Ideal for wherevandalism is a problem. In a fullcolor spectrum — all with blackedges. Available in all styles.
Plastic Laminate
Combining design flexibility,aesthetic appeal and economy in anideal finish — the proven benefitsof high pressure laminates are builtin — featuring a smooth surfacehighly resistant to scratches, grease,and mars. Offered in a complement of designer colors. Available inall styles.
Polymer (HDPE)
Polymer (HDPE) is highly resistantto stains, common acids and cleaningagents as well as to moisture. Theideal choice for busy public facilities— never needs painting and will noteasily dent or chip. Available in awide variety of contemporary colors.Floor Anchored/ Overhead Braced,Ceiling Hung and Floor and CeilingAnchored styles.
Stainless Steel
Gleaming beauty indefinitely.The elegance of stainless steelcomplements any design scheme.Incorporates the known corrosionresistant benefits of type 304stainless steel. Easily maintained,even scratches can be buffed out.Satin or textured finish. Availablein all styles.
Warranty 15 years* Warranty 2 years* Warranty 10 years*
Warranty 10 years* Warranty 5 years* Warranty 3 years*
* See full warranty on website: www.globalpartitions.com
4
GLOBAL polymer toilet partitions arethe ideal choice for high-traffic areas.They are environmentally safe andsanitary, never need painting, and willnot easily dent or chip. It is the materialof choice for low maintenance.
HDPE solid polymer is water resistantand unaffected by high humidity orcorrosive environments and cannotdelaminate. Most commercial cleaningagents will not damage the surface.
GLOBAL HDPE polymer hashomogeneous color and materialcompound throughout. An aluminumheat sink strip is applied to the bottomedge of all doors and panels as standard.
Polymer Color Selection Guide
Simplified Mounting System
Attach mounting system, insertpilaster, adjust height and levelby turning the lock nut adjusters.
Emergency Access
meets ADA requirements.Slotted keeper coupledwith gravity hinges allowsaccess in an emergency.
Vandal-Resistant Fasteners
Special driver installsfasteners which virtuallyeliminates unauthorizedremoval and ensures easyinstallation.
55” High Doors and Panels
14” clearance from floor.
14"
FAST TRACK: 10 Working Days any standard color - in all three styles
9201 White 9235 Cream 9202 Tan
9200 Gray 9237 Charcoal 9231 Azure
9233 Moss 9203 Blue 9211 Burgundy
9205 Black 9217 Black Confetti
9502 Blue Sapphire 9501 GarnetSpeckle Speckle
OPTIONS:
8" Aluminum Hinges
Full Height Stainless Steel Piano Hinges
Integral Hinges
No Sight
Vault-Type Hinge
Rugged, attractive wrap-around hinge. Extra strongfor heavy-duty installations.
Global Polymer (HDPE)
Full Height Stainless Steel Brackets
Full Height Aluminum Brackets
Full Height Plastic Brackets
Plastic Shoes
Shoe Construction
Stainless steel, type 304, with#4 satin finish trim shoes arehemmed top and bottom forrigidity and sleek appearance.
9500 Ivory Essence Speckle
9400 Folkstone Gray
Construction Features
5
Core
Particle boardcore is 45#density to resistwarping and ensure asmooth surface.
Edge
Construction
Face laminateoverlaps edgelaminate toensure waterrunoff andresistsvandalism. All edges arehand filed.
Door Hinges
Full weight-bearing hingeson both top and bottom ofeach door.Wrap-aroundmounting andthrough boltingfor vandalresistance.
Shoe
Construction
Stainless steel,type 304, with#4 satin finishtrim shoes arehemmed topand bottom for rigidity and sleekappearance.
Vandal-Resistant
Fasteners
Special driverinstalls fastenerswhich virtuallyeliminates unauthorized removal andensures easyinstallation.
Plastic Laminate Construction Features
�����������
��
OPTIONS:
Steel Core Pilasters
Plywood Core
Full Height Aluminum Brackets
Full Height Stainless Steel
Brackets
Full Height Piano Hinges
European & Eastern Style
Heights
Global Plastic LaminateGLOBAL plastic laminate partitions combinedesign flexibility with affordable cost. The highpressure laminate finishes, bonded under pressureto a solid impact-resistant particle board core, meetor exceed all NEMA standards. Edge banding of allcomponents prior to face lamination ensuresoptimum water runoff and durability.
GLOBAL plastic laminate is available in all fourinstallation styles and a variety of designer colors tocomplement vanities and counter tops. They are thefinish of choice for commercial and institutionalinstallations where aesthetics are essential.
FAST TRACK: 10 WORKING DAYS Any standard color - in all four styles.
Antique White1020
Almond4000
Sand4010
Lime Stone4300
Neutral Glace1130
Desert Zephyr4583
*Windswept Tan4516
Lodestone9680
Canyon Zephyr3713
Silver Gray 3000
Dove Gray 3010
Folkstone Celesta 3300
Lapis Envision7400
Brittany Blue7010
Navy Grafix7318
MDF Solidz 4777
Tungsten EV 4801
Beluga Beige9208
Burnished Ember 5058
*Windswept Pewter 3849
Storm Solidz3542
Olive Legacy3554
Cotta Stone9310
Graphite Grafix3020
Twilight Zephyr3612
Ochre Roletta9261
Ebony Granite3330
Silver Moss 6010
Oxide 9487
Graphite2150
Hunter Nebula6035
Earthen Terra 4215
Burgundy5000
Burnished Chestnut 9176
Black2000
*Maple9918
*Cherry9954
*Mahogany9939
Natural Canvas4410
Khaki Brown4040
Taupe9096
Tundra Terra3520
Natural Tigris4611
*Windswept Bronze 9292
Color Selection Guide
Mission White1010
* Direction Pattern – pattern on panels over 60” wide will run perpendicular to pattern on doors and pilasters
6
Construction Features
Color Selection Guide
Global Phenolic - Black Core
GLOBAL phenolic partitions are the materialof choice where durability and strength arerequired. These partitions are fabricated tostand the test of time. The dense components,combined with stainless steel brackets andfasteners, stand up to the most extremeconditions of moisture and humidity.Phenolic is impact, water, and corrosionresistant, and does not support bacteria.
The phenolic partition is decoratively facedon both sides as an integral part of a resin-impregnated kraft paper core. The surfaceand core sheets are fused at high temperatureand pressure. In addition to strength andserviceability, a wide range of colorsprovides limitless design flexibility.GLOBAL phenolic partitions are available inall four installation styles.
Shoe ConstructionStainless steel,double-hemmed,trim shoe with #4 satin finishconceals mounting fasteners andhardware.
Vandal-ResistantFastenersSpecial driver installsfasteners, virtuallyeliminating unauthorizedremoval, and ensuringeasy installation.Stainless steel fastenersare standard for phenolic partitions.
Vault-Type Hinge Rugged, attractivewrap-aroundhinge. Extrastrong for heavy-duty installations.
Hunter Nebula6035
Almond4000
Silver Gray3000
Natural Canvas4410
Graphite Grafix3020
Ebony Granite3330
Dove Gray3010
Neutral Glace1130
Folkstone Celesta3300
Burgundy5000
FAST TRACK: 10 WORKING DAYS Any standard color - in all four styles.
OPTIONS:
Class "A" Fire Rated Material
Full Height Piano Hinges
Full Height Stainless Steel Brackets
European & Eastern Style Heights
No Sight
Emergency Accessmeets ADArequirements.Slotted keepercoupled withgravity hingesallows access inan emergency.
Global Shower Products
7
GLOBAL Color-Thru Phenolic providesanother reason to choose phenolic. True to itsname, Color-Thru is made with surface colorthrough and through, to help resist damage;and even discourage vandalism and abuse.Along with phenolic strength, durability andlow maintenance requirement, Color-ThruPhenolic is impact, scratch and graffitiresistant; also it has excellent screw holdingpower and all the advantages of traditionalPhenolic performance. Note: Minor nicks andrandom color variations are a commonconsequence of manufacturing material thatcontains natural fibers.
Same construction features and hardware asGlobal Black-Core Phenolic.
GLOBAL Shower Dividers and Dressing Boothsare strong and durable to hold up in publicshower areas. GLOBAL offers materials thatresist penetration by water, steam, mildew, odorsand soap. The clean, modern design is attractiveas well.
GLOBAL Dressing Booths enhance showerinstallations—available with door or curtainoptions. Choose from solid plastic, phenolic,stainless steel or powder coated steel materials.
Physically Challenged
Specially designed units are available for the physicallychallenged, with a wider front entry for easy wheelchairaccess. Reinforced walls give added strength for grabbars and seat.
Color Selection Guide
Camel4350C
Red Clay5350C
Black2000
Sea Spray6260C
Moss 6350C
COLOR-THRU: 10 WORKING DAYS Any standard color - in all four styles.
Global Phenolic - Color-Thru
Honeycomb
Core is made of cellularhoneycomb. Thistype of coreprovides strongconstruction andsoundattenuation.
Welded Corner
Corners ofpanels, pilastersand doors arewelded to eachother and to theadjacent facesheets.
Vandal-Resistant
Fasteners Specialdriver installsfasteners whichvirtuallyeliminatesunauthorizedremoval andensures easyinstallation.
Global Stainless Steel
Upper Door
Bracket is aninternal part of the door. A pin goesthrough doorand bracket for three-pointbearing andoperates in anylon bushingin upper hingebracket.
Bottom Door
Hinge Gravitypositioning hingeprovides safe,durable, andmaintenancefree support.
Concealed
Latch withemergencyaccess andADA lever handle.
OPTIONS:
Plywood Core
No Sight Line
Full Height Aluminum
Brackets
Full Height Stainless Steel
Brackets
Powder Coated Full
Height Brackets and Shoes
European & Eastern
Style Heights
Stainless Steel Stirrup
Brackets
GLOBAL stainless steel toilet partitions are virtuallyindestructible and retain theirgleaming beauty indefinitely.These units combine the strengthof #304 stainless steel with a #4 satin finish or textured finish, formed and bonded to ahoneycomb core. The face sheetsare held rigid and permanently in place by an interlocking strip welded at each corner.
GLOBAL stainless steelcomponents are impervious to just about any substance. Even scratches caused bydeliberate vandalism can beremoved by buffing. Theelegance of GLOBAL stainlesssteel components complementsany design scheme, either in new construction or forrenovations.
FAST TRACK: 48 Hour Shipping
In #4 Satin Finish. Floor Anchored/Overhead Braced.
Leather finish
Construction Features for Stainless Steel and Powder Coated
Textured finishes
Diamond finish
8
Global powder coated steelpartitions provide high-techquality at an economical price.The powder coated finish iselectrostatically applied overstretcher level quality steel. The finish is highly resistantto wear, fading, staining,scratching and scuffing. It iseasily cleaned with mild soapand wiped dry.
The steel is electrogalvanized to protect against corrosion and provide a proper base for the finish. The face sheets areheld rigid and permanently inplace by an interlocking stripwelded at each corner. The core is cellular honeycombwhich provides strongconstruction and maximumsound attenuation.
Global offers a full color paletteof popular colors for designflexibility.
Powder Coated Color Selection Guide
FAST TRACK: 48 Hour Shipping
Available in all standard colors shown below-Floor Anchored/Overhead Braced.
Pilaster
Mounting
Pilasteradjustments,with floor-mounted jack-leveling deviceis standard onfloor anchored/overhead bracedpilasters.
Alternate
Pilaster
Mounting
This heavygaugemounting isfurnished on all ceilinghung and floor anchoredpilasters.
Shoe
Construction
One-piecestainless steel,type 304, with#4 satin finishtrim shoes arehemmed topand bottom for rigidity and sleekappearance.
Global Powder Coated
9
White2129
Gray2125
Charcoal2123
Black2127
Khaki2115
Almond2103
Dark Khaki2109
Red2145
Burgundy2148
Terra Cotta2107
Azure2101
Royal Blue2135
Sandy Beach2150
Sage2141
Pepper Dust3590
10
PHENOLIC - COLOR-THRU
Solid core, comprised of multiple layersof kraft paper, phenolic resin anddecorative face sheets, all of the samecolor, shall be fused together under hightemperature and pressure.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors shall be constructed of 3/4" color-thru phenolic.Panels shall be constructed of 1/2" color-thru phenolic.
Pilasters shall be constructed of 3/4"phenolic Pilaster shall include a mountingsystem comprising a 1/4" thick x 3/4"wide stainless steel base bar with 3/8"steel lag bolts. Each mounting bar shallbe secured to the building structure withtwo 3/8" cadmium plated self anchoringstuds.
a. All exposed door hardware shall be diecast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shallhave a brushed finish and have wrap-around flanges. The gravity acting camsshall be constructed from 3/4" diameternylon rod and 3/8" diameter stainlesssteel pin. Hinges shall be through-boltedonto doors and pilasters using stainlesssteel, vandal-resistant through bolts.Hinges shall be easily adjusted at jobsiteto a fully closed or partially openedposition.2. Slide latches, strikes and keepers shallbe die cast Zamac with a brushed finish.Keepers shall provide for emergencyaccess into the stall by lifting up on thebottom of the door.b. Hardware includes coat hook, bumper,stop and keeper, and all necessaryfasteners for installation.c. Brackets for panel to wall and panel topilasters attachment shall be stainlesssteel stirrup. Optional full heightstainless steel brackets are available atan additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish.e. Fasteners shall be stainless steel; doorhinges to be mounted with vandal-resistant through bolts; hooks andhandles will be mounted with vandal-resistant full-thread screws.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to beanodized aluminum with satin finish,contoured to provide anti-grip features.
All surfaces to be covered withdecorative laminate matching the color-thru core. All edges being finished.
Colors shall be selected from themanufacturer's standard range of colors(see page 7).
PLASTIC LAMINATE
High-pressure decorative plasticlaminate .050" (1.2 mm) thick bondedwith non-toxic water resistantadhesive under high pressure to 45-lb(20.4-kg) density resin impregnatedparticle-board.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels finished thickness to be 1".Doors to be recessed to accept hinges withinthe plane of the door and yield bi-directionaloperation about an axis within the plane ofthe door.
Pilasters shall be 1-1/4" thick. Pilastersshall include a mounting systemcomprising a 1/4" thick x 1" wide steelbase bar with 3/8"steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self-anchoring studs.
a. Door hardware shall be chromiumplated die cast Zamac on all exposedparts and shall be as noted:1. Hinges shall be recessed into doorand saddle mounted on the adjacentpilaster. Hinges shall be adjustable forpartial opening or self-closing of doors.2. Slide latches shall be mounted at themid-point of the door. Keepers shall bedesigned and installed permittingemergency access to the compartmentby lifting the door until the latch bolt isclear of the keeper.b. Hardware includes coat hook,bumper, stop and keeper, and allnecessary fasteners for installation.c. Brackets for panel to wall and panelto pilasters attachment shall bechromium plated die cast Zamac.Optional full height aluminum orstainless steel brackets are available atan additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish.e. Fasteners shall be chrome-platedsteel; door hinges to be mounted withvandal-resistant through bolts; hooksand handles will be mounted withvandal-resistant full thread screws. -headrail shall be provided to bridge allcompartments. The headrail to beanodized aluminum with satin finish,contoured to provide anti-grip features.
All face and edge surfaces to becovered with decorative laminate.Edges shall be laminated prior to facesheets to enhance vandal resistanceand water run off.
Colors shall be selected from themanufacturer's full range of colors (seepage 5).
PHENOLIC - BLACK CORE
Solid core with decorative laminate on bothsides. Material has multiple layers of resin-impregnated kraft and surface sheets fusedat high temperatures and pressure. All edgesare black.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors shall be constructed of 3/4" black corephenolic.Panels shall be constructed of 1/2" black corephenolic.
Pilasters shall be constructed of 3/4" phenolicPilaster shall include a mounting systemcomprising a 1/4" thick x 3/4" wide stainlesssteel base bar with 3/8" steel lag bolts. Eachmounting bar shall be secured to the buildingstructure with two 3/8" cadmium plated selfanchoring studs.
a. All exposed door hardware shall be diecast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shall havea brushed finish and have wrap-aroundflanges. The gravity acting cams shall beconstructed from 3/4" diameter nylon rod and3/8" diameter stainless steel pin. Hingesshall be through-bolted onto doors andpilasters using stainless steel, vandal-resistant through bolts. Hinges shall be easilyadjusted at jobsite to a fully closed orpartially opened position.2. Slide latches, strikes and keepers shall bedie cast Zamac with a brushed finish.Keepers shall provide for emergency accessinto the stall by lifting up on the bottom of thedoor.b. Hardware includes coat hook, bumper, stopand keeper, and all necessary fasteners forinstallation.c. Brackets for panel to wall and panel topilasters attachment shall be stainless steelstirrup. Optional full height stainless steelbrackets are available at an additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish.e. Fasteners shall be stainless steel; doorhinges to be mounted with vandal-resistantthrough bolts; hooks and handles will bemounted with vandal-resistant full-threadscrews.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to be anodizedaluminum with satin finish, contoured toprovide anti-grip features.
All face surfaces to be covered withdecorative laminate. All edges being finished.
Colors shall be selected from themanufacturer's full range of colors (seepage 6).
MATERIAL INFORMATION
TYPES AVAILABLE:
DOORS ANDPANELS:
PILASTERS:
HARDWARE:
FINISH:
COLORS:
SpecificationsPOLYMER (HDPE)
High-density polyethylene (HDPE) resinswith homogeneous color throughout.
a. Floor Anchored Overhead Bracedb. Floor and Ceiling Anchoredc. Ceiling Hung
Doors and panels to be 1" thick and 55"high and have an extruded aluminumheat sink strip attached to the loweredge.
Pilasters shall be 1" thick. Pilaster shallinclude a mounting system comprising a1/4" thick x 1" wide stainless steel basebar with 3/8" steel lag bolts. Eachmounting bar shall be secured to thebuilding structure with two 3/8"cadmium-plated self anchoring studs.
a. All exposed door hardware shall be die cast aluminum and shall be as noted:1. Heavy-duty die cast vault hinge shallhave a brushed finish and have wrap-around flanges. The gravity acting camsshall be constructed from 3/4" diameternylon rod and 3/8" diameter stainlesssteel pin. Hinges shall be through-boltedonto doors and pilasters using stainlesssteel, vandal-resistant through bolts.Hinges shall be easily adjusted at jobsiteto a fully closed or partially openedposition. Optional integral hinge,stainless steel piano hinge or 8" hingeavailable.2. Slide latches, strikes and keepers shallbe die cast with a brushed finish. Keepersshall provide for emergency access intothe stall by lifting up on the bottom of thedoor.b. Hardware includes coat hook, bumper,stop and keeper, and all necessaryfasteners for installation.c. Brackets for panel to wall and panel topilasters attachment shall be heavy dutyaluminum stirrup. Optional full heightPVC, aluminum or stainless steelavailable at an additional cost.d. Pilaster shoes shall be of type 304stainless steel with a #4 finish. Optionalplastic shoes available.e. Fasteners shall be stainless steel; doorhinges to be mounted with vandal-resistant through bolts; hooks andhandles will be mounted with vandal-resistant full-thread screws.f. Floor Anchored Overhead Braced only -headrail shall be provided to bridge allcompartments. The headrail to beanodized aluminum with satin finish,contoured to provide anti-grip features.
Homogeneous color throughout withuniformly machined edges.
Colors shall be selected from themanufacturer's full range of colors (seepage 4).
11
MATERIAL INFORMATION
TYPES AVAILABLE:
DOORS ANDPANELS:
PILASTERS:
HARDWARE:
FINISH:
COLORS:
STAINLESS STEEL
Stretcher-leveled quality type 304 stainless steel, formed and bonded under pressurewith a non-toxic adhesive to a resin-impregnated, sound-deadening, honeycomb core.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels shall be 1" thick, constructed of two sheets of 22 gauge stainlesssteel. The perimeter shall be sealed with a 22 gauge interlocking molding. Moldingcorners shall be welded to each other and to face sheets and ground smooth to form arigid frame around the component.
a. Floor Anchored Overhead Braced Pilasters shall be 1-1/4" thick constructed of twosheets of 22 gauge stainless steel. Vertical edges shall be sealed with 22 gaugeinterlocking molding. An inverted stirrup shall be welded within the base of each pilasterwith a jack bolt for leveling during installation and permanent load support. "L" bracketsshall be coupled to the stirrup bracket and floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1/4" thick, constructed of two sheets of 18 gaugestainless steel. Vertical and top edges shall be sealed with 22 gauge interlockingmolding. An 11 gauge slotted stirrup bracket shall be welded in the base of each pilaster.Two 3/8" diameter cadmium-plated studs anchor the mounting bracket to a concretefloor.c. Ceiling Hung Pilasters shall be 1-1/4" thick, constructed of two sheets of 18 gaugestainless steel. Vertical and bottom edges shall be sealed with 22 gauge stainless steelinterlocking molding. An 11 gauge slotted stirrup bracket shall be welded to the top ofeach pilaster. Two 3/8" diameter cadmium-plated studs anchor the mounting bracket tooverhead structural steel members.d. Floor and Ceiling Anchored Pilasters shall be 1-1/4" thick, constructed of two sheetsof 22 gauge stainless steel. Vertical edges shall be sealed with 22 gauge interlockingmolding.
a. Door hardware shall be chromium-plated die cast Zamac on all exposed parts andshall be as noted:1. Upper door hinge is recessed and interlocked in door and includes a nylon pin withinthe door. Lower door hinge is recessed in the door and includes mating box, pintle andnylon cams, which provide the bearing surface. The cams are adjustable to allow thedoor to rest at any position within a 270-degree range.2. All concealed latches shall be mounted at mid-point of the door. b. Hardware includes coat hook, bumper, stop and keeper, and all necessary fastenersfor installation. c. Brackets for panel to wall and panel to pilaster attachment shall be chromium-plateddie cast Zamac.d. Pilaster shoes shall be of type 304 stainless steel with a #4 finish.e. Fasteners shall be of chrome-plated steel; door hinges will be mounted with vandal-resistant through bolts; hooks and handles will be mounted with vandal-resistant full-thread screws.f. Floor Anchored Overhead Braced only - headrail shall be provided to bridge allcompartments. The headrail to be anodized aluminum with satin finish, contoured toprovide anti-grip features.
All components shall be #4 satin finish stainless steel and shall be covered with a vinyl film forprotection during shipment and installation.
Stainless steel #4 satin finish is standard. Optional leather grain or diamond texturedstainless steel is available at additional cost.
SpecificationsPOWDER COATED
Stretcher-leveled quality galvannealed steel, formed and bonded under pressure witha non-toxic adhesive to a resin-impregnated, sound deadening honeycomb core.Hybrid resin powder which is electrostatically charged, is sprayed onto the surfacethen heated fused in a curing oven into a smooth coating.
a. Floor Anchored Overhead Bracedb. Floor Anchoredc. Ceiling Hungd. Floor and Ceiling Anchored
Doors and panels shall be 1" thick, constructed of two sheets of 22 gauge steel. Theperimeter shall be sealed with a 22 gauge interlocking molding. Molding corners shallbe welded to each other and to face sheets and ground smooth to form a rigid framearound the component.
a. Floor Anchored Overhead Braced Pilasters shall be 1-1/4" thick constructed of twosheets of 22 gauge steel. Vertical edges shall be sealed with 22 gauge interlockingmolding. An inverted stirrup shall be welded within the base of each pilaster with ajack bolt for leveling during installation and permanent load support. "L" brackets shallbe coupled to the stirrup bracket and floor for full range adjustment.b. Floor Anchored Pilasters shall be 1-1/4" thick, constructed of two sheets of 18gauge steel. Vertical edges shall be sealed with 22 gauge interlocking molding. Thetop of each pilaster shall be sealed with 22 gauge interlocking molding. A 11 gaugeslotted stirrup bracket shall be welded in the base of each pilaster. Two 3/8" diametercadmium-plated self anchoring studs anchor the mounting bracket to a concrete floor.c. Ceiling Hung Pilasters shall be 1-1/4" thick, constructed of two sheets of 18 gaugesteel. Vertical and bottom edges shall be sealed with 22 gauge interlocking molding. A11 gauge slotted stirrup bracket shall be welded to the top of each pilaster. Two 3/8"diameter studs anchor the mounting bracket to overhead structural steel members. d. Floor and Ceiling Anchored Pilasters shall be 1-1/4" thick, constructed of two sheetsof 22 gauge steel. Vertical edges shall be sealed with a 22 gauge interlockingmolding.
a. Door hardware shall be chromium-plated die cast Zamac on all exposed parts andshall be as noted:1. Upper door hinge is recessed and interlocked in door and includes a nylon pin withinthe door. Lower door hinge is recessed in the door and includes mating box, pintle andnylon cams, which provide the bearing surface. The cams are adjustable to allow thedoor to rest at any position within a 270-degree range.2. All concealed latches shall be mounted at mid-point of the door.b. Hardware includes coat hook, bumper, stop and keeper, and all necessary fastenersfor installation.c. Brackets for panel to wall and panel to pilaster attachment shall be chromium-plated die cast Zamac.d. Pilaster shoes shall be of type 304 stainless steel with a #4 finish.e. Fasteners shall be of chrome-plated steel; door hinges will be mounted withvandal-resistant through bolts; hooks and handles will be mounted with vandal-resistant full-thread screws.f. Floor Anchored Overhead Braced only - headrail shall be provided to bridge allcompartments. The headrail to be anodized aluminum with satin finish, contoured toprovide anti-grip features.
All components shall be cleaned prior to the application of polyester powder coating.
Colors shall be selected from the manufacturer's full range of colors (see page 9).Custom colors available at additional cost.
Specifications:
If you need complete specifications or additional information, you will find it on our website:www.globalpartitions.com.
You can also secure specifications through ARCAT SpecDisk, available upon request or on the internet atwww.ARCAT.com or through Sweet’s CD(http://www.SWEETS.com)
As always, GLOBAL’s customer service isready to assist you with any and all needs!
The color charts shown in this catalog areprinted reproductions and are fordescriptive purposes only. Color selectioncards are available upon request. Globalreserves the right to change specificationsand products without notice.
ADA Code Requirements:
Global has been a pioneer in thedesign of facilities for thephysically challenged. Our
engineers stand ready to assist in layoutdesign to meet code or specialrequirements.
2171 Liberty Hill Road
Eastanollee, GA 30538
TEL: 706-827-2700
FAX: 706-827-2710
Website: www.globalpartitions.com
E-mail: [email protected]
© 2009 Global Partitions, an ASI Group Company
Global Privacy and UrinalScreens are available inthree, easy to maintainmounting configurations andare offered in six materials:polymer, plastic laminate,phenolic-black core,phenolic-color-thru, stainlesssteel and powder coated.Construction styles includewall hung, floor anchoredand post-to-ceiling screens.
Wall Hung Screens
Standard sizes:24" x 42", 18" x 42", 12" x 42".
Floor Anchored Screens
6" wide pilasters, 58" high panels by depthrequired.
Post-to-Ceiling Screens
Post 1-3/4" sq. x 10' satinfinish aluminum.
Global Privacy and Urinal Screens
Distributed by: