Ashghal Cad Standards Manual
-
Upload
john-cartel -
Category
Documents
-
view
1.576 -
download
87
description
Transcript of Ashghal Cad Standards Manual
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
AUTOCAD LAYERING STANDARDS Version 1.0
March 5, 2007
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Acknowledgement This Standard represents the extensive effort and support of many individuals
within Public Works Authority. Technical Services Department expresses
appreciation of the valuable assistance given by the Directors, Managers and
Head of departments. Without the co-operation, the extensive work involved in
compiling background information and preparing the standards would not be
possible.
We would also like to place on record our appreciation of the assistance
rendered to us by the coordinators and our respective staffs. Who also rendered
valuable advice and guidance in bringing these standards to completion and in
editing the text for publication.
Special thanks to Director of Building Affairs
Director of Drainage Affairs
Director of Roads Affairs
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Document Control Version Date Modified by Agency Purpose Version 1.0 March 5, 2007 Ashghal
Additions/Revisions This standard is intended to be neither static nor all-inclusive and thus will be updated and enhanced as appropriate. Suggestions for improvements are strongly encouraged so that subsequent updates will reflect the input and needs the current format will undergo versioning or changes when new technologies become available. Addendum to these standards will be issued when such changes are made. In general, changes to this standard shall occur because of three primary factors: 1) additional users and functionality; 2) discovery of, and subsequent fixing of latent errors and omissions; 3) changes to utilize advantage of more current technology and software versions. Therefore, it is reasonable to expect updates to this document. Users are cautioned to inquire about changes within. In order to ensure the reader is using the latest version, a revision date will be shown in the document control.
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
AutoCAD layering STANDARDS: Control and Authorization The Standards are under Technical Services Department Management
Document Title : AutoCAD layering Standards.
Date : March 5th 2007
Document Owner : ASHGHAL
Document Coordinator : Ibraiz Mohamed Khan
AutoCAD layering STANDARDS: Distribution
The Master or Original Version of the AutoCAD Layering Standards is held
electronically in ASHGALS Technical Services Department. The copy of these
AutoCAD Layering Standards will be available on our website
(www.Ashghal.gov.qa or www.Ashghal.com) PWA department directorates, and
Contracts Engineering and Business Affairs
AutoCAD Layering STANDARDS: Authorization and Change These standards will undergo continuous reviews and updates, subject to
change, by the Management of ASHGHAL. Any changes or updations that occur
will be announced on our website (www.Ashghal.gov.qa or www.Ashghal.com).
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Coordinators from the respective departments Nasser Rashid Essa Al-kuwari Technical Services Department
Ibraiz Mohamed Khan Technical Services Department
Chandrakant Pawar Technical Services Department
Abdul Khaliq Technical Services Department
Hassan Al Sadig Technical Services Department
Abdulla Ahin Roads Affairs
Mario Domingo Roads Affairs
Yasser Noor Drainage Affairs
Mustafa Mughrabi Drainage Affairs
Sameh Mousa Town Beautification
Fouad Frangieh Town Beautification
Wael Mohd Abdul Salam Building Affairs
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Table of Contents 1 INTRODUCTION ................................................................................................................................ 7
1.1 Objective .................................................................................................................................... 7 1.2 Scope ......................................................................................................................................... 8 1.3 Users .......................................................................................................................................... 8
2 DEFINITIONS AND ACRONYMS ................................................................................................... 8
3 GUIDELINES ...................................................................................................................................... 9
4 GENERAL REQUIREMENTS........................................................................................................ 10
4.1 Conditions of Compliance...................................................................................................... 10 4.2 Standards for Attribute data .................................................................................................. 11 4.3 Plans Submittal requirements and procedures .................................................................. 12
5 AVAILABLE INFORMATION ........................................................................................................ 14
5.1 Layer Manager ........................................................................................................................ 16 5.1.1 Layer Name Layout....................................................................................................... 17
5.2 Location Map, Direction and Scale ...................................................................................... 18 5.3 Legends.................................................................................................................................... 19 5.4 Details content......................................................................................................................... 20
6 COORDINATE SYSTEMS.............................................................................................................. 21
7 PRECISION ...................................................................................................................................... 21
8 DATA SUBMISSION STANDARDS ............................................................................................. 22
9 CONTACT : ...................................................................................................................................... 24
10 APPENDIX 1.0 - LAYERING STANDARDS - BUILDING MECHANICAL........................... ......25
11 APPENDIX 2.0 - LAYERING STANDARDS BUILDING STRUCTURAL ..29
12 APPENDIX 3.0 - LAYERING STANDARDS BUILDING ELECTRICAL ..32
13 APPENDIX 4.0 - LAYERING STANDARDS - BUILDING ARCHITECTURAL
FEATURES.................................................................................................................................. 37
14 APPENDIX 5.0 - BUILDINGS ATTRIBUTES......................................................................... 40
15 APPENDIX 6.0 - LAYERING STANDARDS - DRAINAGE .................................................. 66
16 APPENDIX 7.0 - DRAINAGE ATTRIBUTES.......................................................................... 79
17 APPENDIX 8.0 - LAYERING STANDARDS - ROADS........................................................ 121
18 APPENDIX 9.0 - ROADS ATTRIBUTES ............................................................................... 133
19 APPENDIX 10.0 - TOWN BEAUTIFICATION LAYERING STANDARDS - 165
20 APPENDIX 11.0 - TOWN BEAUTIFICATION ATTRIBUTES........................................... 169
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Introduction
Ashghal Technical Services Department aims to service all the departments
within Ashghal, outside government organizations and public organizations. It
has recognized that all work flow have some common characteristics, enabling
them potentially to achieve a level of interoperability through the use of common
standards for various functions. Ashghal - EIS have initiated to identify these
functional areas and develop appropriate specifications for implementation of
AutoCAD layering STANDARDS. It is intended that such standards and
specifications will enable interoperability between heterogeneous workflow and
improved integration of workflow, thereby improving the opportunities for the
effective use of workflow process within Ashghal and the outside domains.
Ashghal is committed however to enforcing the standards of information delivery
that insures predictability and the ability to easily reuse information. As a result
these AutoCAD layering STANDARDS will be included as part of the contractual
requirement for delivery of digital information to Ashghal
These standards describe AutoCAD layering STANDARDS to be adopted on
projects from design to construction.
1.1 Objective
The purpose these standards are to promote compatibility and interchange of
digital spatial data between Ashghal and the clients. This will facilitate seamless
integration between AutoCAD and Geographic Information System and, to assist
those responsible for incorporating this disparate data into GIS to ensure easier
data translation, common language, ease of data storage, common medium of
information exchange, drawings and data can be transferred and integrated with
other applications, drawings and data created for one particular project or project
discipline are compatible with those for others.
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
1.2 Scope
The scope of this document is to provide guidelines and procedures for adopting
AutoCAD layering standards in preparing design and As-built drawings, where
these drawings will be automated to GIS. These standards address layer
assignments, standard symbology, layers, layer names, attributes to each
feature, templates, color usage associated with line widths for all mechanical,
electrical, structural, architectural drawings associated with buildings, roads,
drainage and city beautification drawings.
1.3 Users
The intended users of this Auto CAD layering Standards are anyone who is going
to be involved in design or construction projects for Ashghal, including the
Ashghal staff, consultants, contractors, Sub Contractors, Construction
companies, Project engineers, Discipline engineers and draftsperson
2 Definitions and Acronyms
ABD Abandon AR Architectural As-BUILT Measured and revised drawings documenting the Full
extent of completed works. AutoCAD AutoCAD 2006 or later B Building BA Building Affairs C Construction CAD Computer Aided Drafting CON Continuous CTRL Control D Drainage DA Drainage Affairs DE Design DWG Default AutoCAD drawing file format E Electrical EIS Engineering Information System Ex Existing F Furniture
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
G Gas GIS Geographic Information System HID Hidden Layout Defined drawing space in AutoCAD for placing Title sheets etc. Me Mechanical Model Space Defined drawing space in AutoCAD. O Oil PPLN Policy Plan Pr Proposed PWA Public Works Authority QNG Qatar National Grid RA Road Affairs RD Roads SEW Sewer ST Structural T Telephone TB Town Beautification TBi Town Beautification Irrigation TBL Town Beautification Landscaping TSD Technical Services Department U Presentation and Plans W Water XREF An external drawing file that is referenced into the
main drawing Z Core layers .
3 Guidelines
These AutoCAD layering standards (see Appendixes) are to be applied for all the
projects concerning design and As-built projects.
Through out this document the use of the name AutoCAD implies AutoCAD release 2006 unless otherwise specified.
As-Built drawings include design & detail changes that may have taken place
after the initial issue of construction documents, as well as changes made to the
actual facility during construction
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
The drawings will be electronic using the AutoCAD version 2006. All CAD
drawings are to be drawn using an AutoCAD program capable of reading and
writing drawing files in AutoCAD DWG format without conversion.
Ashghal will provide consultants and contractors an AutoCAD template (see fig
2.0 as an example) on a CD- ROM with project boundaries containing policy plan
and topographic features as base map (site Plan) which are geo referenced as
per QNG (Qatar National Grid). All the features of the projects must be drawn
onto that template only.
It is the responsibility of the client to organize drawing information coherently as
mentioned in the standard and maintain reasonable file size
4 General Requirements
4.1 Conditions of Compliance
All Consultants and contractors are required to meet the specifications of the
AutoCAD layering Standards set by Ashghal, as part of their conditions of
engagement.
In the AutoCAD template provided the user shall use the specific layering
STANDARDS by selecting which ever layer is applicable for the feature / entity
by switching on the necessary layers.
The Cad files provided will be in AutoCAD 2006 file format. Fonts and line types are to be followed as provided in this manual. Plot style table Is to be maintained as provided in this manual No external reference to be used. Multiple drawings shall not be contained in model space
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Files shall be purged. Drawing features / entities should be in model space. The color and linetype of each entity is drawn BYLAYER.. All fonts used in the AutoCAD files shall be SHX type font. True type fonts
will not be accepted. If text is used to represent an object then the
insertion point must be middle center justified. In the standards all the
text is mentioned as continuous.
All polygons shall be closed polylines. File name should accurately be named to identify it is a design or As-built
project
Do not place entities on layer 0. File size should be within reasonable limits.
4.2 Standards for Attribute data
1. All attribute information features must be provided as Extended Entity Data (EED / XDATA) or OBJECT DATA for polyline features.
2. The Required Feature Attribute Table Fields associated with the
corresponding layer are mentioned in the appendices. For example,
FEATURE NAME
LAYER NAME
DESCRIPTION FEATURE TYPE
REFERENCE ATTRIBUTE
Flush Kerb RD_EX_KBFL Existing Road Feature: Flush Kerb
Polyline 4
3. The Template provided by Ashghal does not contain the fields for the layer, so the contractor must add ALL the fields as mentioned in the attribute table for the particular layer.
4. All the relevant information associated to the feature must be completely
filled as per the lookup table provided herein. For example
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 4: (Kerb) FIELD NAME DESCRIPTION FIELD
TYPE FIELD WIDTH
VALUE
Proj-Num Project Number C 6 Zone # Zone Number N 3 Code Feature Code C 6 KERB Kerb Concrete edging
between pavement and carriageway
C 2 SK = Standing Kerb RK = Raised Kerb DK = Drop Kerb FK = Flush Kerb
4.3 Plans Submittal requirements and procedures
1. Site plan or Floor plan
The Floor Plan or Site Plan must include:
A. Building outline with dimensions.
B. Interior partitions(s) with dimensions.
1. Label all rooms and spaces as to use.
2. Label all rated walls and partitions - exterior and interior.
C. Show all openings in interior and exterior walls.
D. Show opening in floor/ceiling assemblies with dimensions.
2. Elevation drawings
A. Elevation drawings are required on all construction and include
alterations or additions to the exterior of building or structures.
B. The elevation drawings are orthographic drawings (a single view of
an object done with perpendicular lines or right angles) of the
exterior of a building, road, drainage or structure. Show the design,
materials, dimensions and final appearance of the exterior of a
building or structure. Including doors, windows, roof style,
overhang, dimension height and width, and grade line.
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
3. Sectional Drawings
Sectional drawings are required on all internal construction of a building,
or structure and also where ever applicable for drainage and roads
features.
A. Structures will require a drawing prepared for the entire structure
(full section).
B. All projects will require drawings for specific parts of the building,
roads or drainage (detail sections).
C. Sections should expose the size and shape of building materials
and components not revealed on floor plans.
D. Detail sections should include
1 Vertical wall section exterior show the material and
dimensions of material used to construct the wall. Including
exterior wall covering.
2 Vertical wall section interior show the material and
dimensions of material used to construct the wall.
3 Footing section show the width and length of the footing, the
type material used and the position of the foundation wall on
the footing and dimension of foundation wall. Detail any
change in elevation (i.e. step-downs).
4 Sill section show how the foundation supports and intersects
with floor system and the outside wall. Anchor bolts should be
addressed in sill section.
5 Beam details show how the floor system is supported by
beam and how columns or foundation walls support the beam.
6 Cornice section show the relationship between the outside
wall, top plate, and rafter construction. Details finish materials.
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
7 Stairway section show the dimensions of treads and risers
and includes handrail detail.
NOTE: Site Plan or Floor Plan and Elevation Plans are to be geo referenced.
5 Available Information
Ashghal provides base map (Site Plan) with Policy Plan, Roads networks and
Coastline in model space with project location and project boundaries. (See
Figure.1.0).
Example of an AutoCAD template
Figure 1.0
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Project boundaries are drawn as polylines. All area polylines shall be closed (Note: project limits are roughly drawn and must not be used for final calculations of quantities or alignments).
Information which can be used as reference data in carrying out project. The following entities are included in the table below.
Feature Layer Name Attribute Data 1 Control Points GIS_CTRL Full details
(e.g., station name, E,N, height, accuracy ratings, Etc)
2 Policy Plan GIS_PPLN None 3 Zone GIS_ZONE None 4 Streets GIS_RD00-03 None 5 Coastline GIS_CSTL None
All elements are in two coordinates(X, Y,) except for control point which is
in (X, Y, Z). Where ever applicable benchmarks/control points are shown,
the coordinates and mapped points of these control points must be
submitted with the final work. The control points are placed in stable areas
where there is a little chance of them being destroyed.
Standards to be used or adhered in the preparation of design and as-built project drawings:
o Drawing layout dimension, title box details, etc. o Standard symbols, line types and annotations/labels o Layering Standards (see detailed layering Standards In Appendix
8.0 )
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
5.1 Layer Manager
Layering standards are classified in the layer manager as layers (see figure 2.0
as an example) The users shall select the layers for the appropriate feature /
entity which has layer name, linetype, color, line weight. All possible attribute
data for each feature / entity is also provided. (See appendixes)
Figure 2.0
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
5.1.1 Layer Name Layout
The methodology in defining Layer name is mentioned below
Field 1 = Department designator Field 2 = Status / Section Designator Field 3 = Feature / Entity Designator
Department designator is the primary field which identifies the department. The
status or section field differentiates proposed or existing stage of the project. The
Feature designator signifies the features name.
For Example see below tables.
Layer Name Line Type
Line Wt Acad Color Usage
D_Ex_SEW _ABD A 0 0.18 30 Abandon sewer line
D = Department Ex_SEW = Section / status ABD = Feature
Layer Description Color Line Type B_AR_ACCESS Main Gate RED Continuous
B = Department AR = Section ACCESS = Feature
Layer Description Color Line Type Thickness Symbol
TB_L_ Trees Tress large & small Black TB = Department L = Section Trees = Feature
Layer Description Color Line Type RD_De_KBDR Design road Feature: Dropper Kerb Green Hidden RD = Department De = Status KBDR = Feature
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
5.2 Location Map, Direction and Scale
All the necessary project details are provided on the paper space template with
Location Map, arrow showing the North direction and Scale. (See Figure 3.0)
Figure 3.0
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
5.3 Legends
Lists of legends are listed in the template which is available (see figure 4.0)
Figure 4.0
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
5.4 Details content
Title Block (see figure 5.0)
PWA Block. Consultant Block Contractor Block, Project title Project Code Sheet Contents, Scale Date, Project Coordinator, Drawing number Project concerned department
Figure 5.0
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
6 Coordinate Systems
Coordinates used are in meters based on the Qatar National Grid (QNG), which
is a Transverse Mercator Projection (See table below):
Central Meridian 51 13' 00" E Scale Factor at the Central Meridian
0.99999
Location of the Origin 51 13' 00" E 24 27' 00" N False Easting of the Origin 200,000 m False Northing of the Origin 300,000 m Reference Spheroid International (Hayford)
The vertical datum is the Qatar National Datum, which is defined by mean sea
level in Doha
7 Precision
Coordinates are stored in double precision (15 significant digits). Given the
coordinate system defined above, all Easting and Northing will carry 6 digits
before the decimal. Thus, the coordinate resolution (precision) for vector data is 9
significant digits after the decimal1.
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
8 Data Submission Standards
These guidelines are to be observed and followed by all the users who submit the AutoCAD files to Public Works Authority Ashghal for Design, and As-built drawings. They are intended to support and maintain uniformity. Note: All drawing files must conform to the AutoCAD layering standards set forth in this document. Clients will submit to Ashghal a complete set of the project in Electronic form. These must include all the supporting files and must be delivered as follows. File may be submitted to Ashghal digitally using one of the following methods. On CD RW disks. Disk media should be packed into a container for ease of handling and storage and protected against damage during handling. Disk media Both the CD-ROM case and the CD-ROM itself shall be labeled with. The project name and number
Short description of the media content i.e. As-Built, detail drawings, shop drawings etc The name, address, and phone number of the Consultant etc
The name of the project Manager The date of issue of the disk Date of submittal Virus Scanned (date & software used)
Media Number: x of xx An index file (in Microsoft Word format) describing the contents of the submission shall be provided. The index file should include:
The project name and number The name, address and phone number of the consultant. The name of the Ashghal project manager for that particular project The date of issue of the submission The project code (alphanumeric as above)
The index shall be comprised of a table with one row for each AutoCAD file in the submission. The column should represent: The name of the AutoCAD file.
The name of the compressed file in which the file is contained (if applicable).
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
The disk on which the AutoCAD (or compressed) files can be found (if applicable). The project code as assigned to the consultant or contractor by Ashghal.
The title of the drawing as it appears in the title block The date of issue of the drawing. If the submission comprises more than one disk, the same index file should accompany each disk. A printed version of the index should accompany the transmittal. Each AutoCAD file must be in AutoCAD DWG format. DXF format is not acceptable. Clients shall submit in the disk media all the files in a directory structure as follows Folder: As-built drawing (GIS AutoCAD template) Folder: Details drawings Folder: Documents As-built: The Final As-Built drawings will reside Detail Drawings: All other detailed drawings related to that particular project will reside Documents: Project related Word or PDF documents will reside
As-Built Detail Drawings Documents
Project Number
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
9 Contact :
Clients shall direct their comments, queries or any additional training needs regarding these AutoCAD layering standards to Public Works Authority - Ashghal Technical Services Department Engineering Information System Nasser Rashid Essa Al-kuwari Tel No : 4950500 Ibraiz Mohamed Khan Tel No: 4950174
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
10 Appendix 1.0 - Layering Standards - Building Mechanical
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_HVAC_AHU CON Default 140 NA Air Handling Unit B_HVAC_CH CON Default 140 NA Chiller Unit B_HVAC_C_P CENTER Default 138 Chiller Pipe B_HVAC_CHP CON Default 137 NA Chilled Water
Pumps B_HVAC_CiP CON Default 137 NA Circulating Pumps B_HVAC_Cond HIDDEN Default 132 NA Cond drain pipe B_HVAC_DAC CON Default 137 NA Standard Air
Conditioning Details
B_HVAC_DDC CON Default 138 NA Direct Digital Control of Building System
B_HVAC_DG CON Default 138 NA Door Grill B_HVAC_DIM CON Default 132 NA HVAC Dimension B_HVAC_Duct CON Default 139 NA Main Duct B_HVAC_EF CON Default 138 NA Extract Fan B_HVAC_Edu CON Default 132 NA Exhaust Duct B_HVAC_ExD HIDDEN Default 133 NA Existing Duct B_HVAC_FD CON Default 132 NA Floor Drain B_HVAC_Fs CON Default 132 NA Air Conditioning
Fittings B_HVAC_FlD CON Default 132 NA Flexible Duct B_HVAC_nAC CON Default 137 NA Standard Note Air
Conditioning B_HVAC_OP CON Default 139 NA Access Opening B_HVAC_RD CON Default 137 NA Return Diffuser B_HVAC_ReP HIDDEN Default 139 NA Refrigerant Pipes B_HVAC_RG CON Default 137 NA Return Grille B_HVAC_SD CON Default 137 NA Supply Diffuser B_HVAC_SG CON Default 137 NA Supply Grille B_HVAC_SAC CON Default 140 NA Split Air
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
Conditioning B_HVAC_Dm CON Default 137 NA Dummy Diffuser B_HVAC_VAV CON Default 137 NA Variable Air VolumeB_HVAC_BMS CON Default 137 NA Building
Management System
B_HVAC_DDC CON Default 137 NA Direct Digital Control of Building System
B_HVAC_FCU CON Default 137 NA Fan Coil Unit B_HVAC_ILF CON Default 137 NA Inline Fan B_HVAC_VCD HIDDEN
2 Default 132 NA Volume Control
Damper B_HVAC_TXT CON Default 137 NA Air Conditioning
Text B_HVAC_WAC CON Default 140 NA Window Air
Conditioning B_HVAC_ED CON Default 138 NA Extract Diffuser B_MeD_CP CON Default 138 NA Catch Pit B_MeD_Det CON Default 132 NA Standard Drainage
details B_MeD_DIM CON Default 131 NA Standard Drainage
dimensions B_MeD_eDRL HIDDEN Default 134 NA Existing Drainage
layout internal B_MeD_eHT HIDDEN Default 135 NA Existing holding
tank B_MeD_eST HIDDEN Default 135 NA Existing Septic
Tank B_MeD_ESVC CON Default 139 NA External drainage
piping B_MeD_FD CON Default 138 NA Floor Drain B_MeD_FG CON Default 138 NA Floor Gully B_MeD_HT CON Default 139 NA Holding Tank B_MeD_MH CON Default 140 NA Manhole internal
within the perimeter of the building
B_MeD_MPVC CON Default 138 NA Common Pipe
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
drawings B_MeD_pDRL HIDDEN Default 134 NA Existing drainage
layout internal B_MeD_pMH HIDDEN Default 134 NA Proposed manhole
internal B_MeD_pST HIDDEN Default 134 NA Proposed Septic
tank B_MeD_RSA CON Default 139 NA Rain water
soakaway B_MeD_SAAC CON Default 137 NA Air-Conditioning
soakaway B_MeD_SP CON Default 137 NA Sump pumps B_MeD_SSA CON Default 139 NA Septic tank
soakaway B_MeD_ST CON Default 139 NA Septic tank B_MeD_TXT CON Default 137 NA Standard drainage
text B_MeD_UPVC CON Default 138 NA Internal drainage
piping B_MeP_CWS CON Default 138 NA Cold Water Supply B_MeP_EWH CON Default 140 NA Electric Water
Heater B_MeP_EWT CON Default 140 NA Elevated Water
Tank B_MeP_eEWT HIDDEN Default 135 NA Existing Elevated
Water Tank B_MeP_eFP CON Default 135 NA Existing Fire
Pumps B_MeP_eGWT HIDDEN Default 135 NA Existing Ground
Water Tank B_MeP_eIWS CON Default 135 NA Existing Internal
Water Supply B_MeP_eMWS DIVIDE Default 135 NA Existing Main
Water Supply B_MeP_eRWT HIDDEN Default 135 NA Existing Roof Water
Tank B_MeP_eWME HIDDEN Default 137 NA Exiting Water Meter
Enclosure B_MeP_eWP CON Default 135 NA Existing Water
Pumps
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_MeP_FF CON Default 132 NA Fire Fittings B_MeP_GWT CON Default 140 NA Ground Water TankB_MeP_DIM CON Default 132 NA Plumbing
Dimension B_MeP_HWR DASHDO
T Default 138 NA Hot Water Return
B_MeP_HWS HIDDEN Default 138 NA Hot Water Supply B_MeP_PF CON Default 132 NA Plumbing Fittings B_MeP_RWT CON Default 140 NA Roof Water Tanks B_MeP_SN CON Default 131 NA Sprinkler Nozzle B_MeP_SBL CON Default 138 NA Sprinkler Branch
Pipe B_MeP_SMPL Center Default 140 NA Sprinkler Main Pipe
Line B_MeP_TXT CON Default 137 NA Standard Plumbing
Text B_MeP_VC CON Default 138 NA Valve Chamber B_MeP_WME CON Default 140 NA Water Meter
Enclosure B_MeP_WP CON Default 137 NA Water Pumps
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
11 Appendix 2.0 - Layering Standards Building Structural
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_ST-Grids Center2 Default 8 NA Grid Line B_ST-Grids Text
CON Default Green NA Grids Text
B_ST-Circle CON Default Red NA Slab Thickness Circle
B_ST-Columns
CON Default Green NA Columns
B_ST-Column SC
CON Default Green NA Stub Column
B_ST-Column PC
CON Default Green NA Planted Column
B_ST-Footings
CON Default White NA Footings
B_ST-Blinding
CON Default Magenta NA Blinding
B_ST-Bitu Hidden2 Default Green NA Bitumen B_ST-Polythene
CON Default Red NA Polythene Sheet
B_ST-Plan CON Default Magenta NA Plan B_ST-Beams CON Default Magenta NA Beams B_ST-Steps CON Default Magenta NA Stairs B_ST-Reinf 1 CON Default Blue NA Reinf B_ST-Reinf 2 CON Default Green NA Reinf B_ST-Reinf C CON Default Magenta NA Cross Reinf B_ST-Bott Reinf
CON Default Green NA Bottom Reinf
B_ST-Top Reinf
Hidden2 Default Green NA Top Reinf
B_ST-Section 1
CON Default Magenta NA Sections
B_ST-Section 2
CON Default Magenta NA Sections
B_ST-Steel Col
CON Default Magenta NA Steel Columns
B_ST-Steel CON Default Magenta NA Steel Beams
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
Beam B_ST-Rafter CON Default Magenta NA Rafter B_ST-Plates CON Default Magenta NA Plates B_ST-Angels CON Default Magenta NA Angels B_ST-Welds CON Default Magenta NA Welds B_ST-Purlins CON Default Magenta NA Purlins B_ST-Sheeting
CON Default Yellow NA Sheeting
B_ST-Ribs Hidden2 Default 8 NA Ribs B_ST-Mesh CON Default Green NA Mesh Reinf B_ST-Bolts CON Default Red NA Bolts B_ST-Hatch 1
CON Default Red NA Hatch
B_ST-Hatch 2
CON Default Cyan NA Hatch
B_ST-Col-H CON Default 9 NA Column Hatch B_ST-Solid CON Default 253 NA Solid B_ST-Text 1 CON Default White NA Text B_ST-Text 2 CON Default Green NA Text B_ST-Beam Text
CON Default White NA Beam Text
B_ST-Slab Text
CON Default White NA Slab Text
B_ST-Col Text
CON Default Green NA Columns Text
B_ST-Foot Text
CON Default Green NA Footings Text
B_ST-Dim CON Default Red NA Dimensions B_ST-Dim L CON Default Red NA Dim Leader B_ST-Dim C CON Default Red NA Dim Columns B_ST-Dim F CON Default Red NA Dim Footings B_ST-Dim Slab
CON Default Red NA Dim Slabs
B_ST-Dim Beam
CON Default Red NA Dim Beams
B_ST-Dim Sect
CON Default Red NA Dim Sections
B_ST-Level 1 CON Default Magenta NA Level in plan
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_ST-Level 2 CON Default Magenta NA Level in Sections B_ST-Boulders
CON Default Red NA Boulders
B_ST-Concrete
CON Default Red NA Concrete
B_ST-Sand CON Default Red NA Sand B_ST-Block Work
CON Default Red NA Block Work
B_ST-Earth CON Default 8 NA Earth B_ST-Sect Mark
CON Default Magenta NA Section Mark in Plan
B_ST-Hidden Hidden2 Default Red NA Misc Hidden Line B_ST-Grid Circle
CON Default Yellow NA Grid Circle
B_ST-Notes CON Default Magenta NA Notes B_ST-Wall CON Default Magenta NA Walls
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
12 Appendix 3.0 - Layering Standards Building Electrical
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_E-LF CON Default White NA Light Fittings B_E-SL CON Default White NA Light Fittings &
E.FAN switches B_E-LFCL CON Default Yellow NA Light Fittings
control line B_E-CL dashed Default Yellow NA Elect. Circuit line B_E-POWER CON Default White NA All low power+ AC
outlets, isolators B_E-FCO CON Default Magenta NA Flexible cable
outlets B_E-WH CON Default Magenta NA Elect. Water
heaters B_E-CCU CON Default Magenta NA Elect. Cooker
control unit B_E-EXF-CF CON Default Magenta NA Elect .Extract fans,
ceiling fans B_E-CBPB CON Default Cyan NA Elect. Call bell &
push button B_E-MSCR center Default Green NA Main & sub-main
cbles routes B_E-LEGEND
CON Default White NA Electrical symbols
B_E-GNT CON Default Yellow NA Electrical general notes/text
B_E-LFSMR CON Default Yellow NA Light fittings schedule/Model reference
B_E-MSB-DB CON Default White NA Electrical main switch or distribution board
B_E-DBB CON Default Red NA Electrical Distribution Board Block
B_E-DBD CON Default Yellow NA Electrical Distribution Board Details
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_E-SLD CON Default White NA Electrical single line diagram
B_E_SPST dashed Default White NA Small power skirting, trunking
B_E-CTR dashed Default Blue NA Electrical cables tray route
B_E-CTGR center Default Blue NA Electrical cables trunking route
B_E-CPANEL CON Default Cyan NA Electrical cubical panel
B_E-BBR CON Default Magenta NA Electrical bus bar riser
B_E-CD center Default White NA Cable ducts B_E-MH CON Default Cyan NA Electrical manhole B_E-CP CON Default Blue NA Electrical control
panels B_E-CJB CON Default Yellow NA Electrical cables
junction box B_F-HSD CON Default White NA Fire heat & smoke
detectors B_F-ETS CON Default Green NA Fire extinguishers B_F-AB-CP CON Default Red NA Fire Alarm bell &
call point B_F-AMP CON Default Green NA Fire Alarm Main
panel B_F-HR CON Default White NA Fire Hose reel B_F-MDS dashed Default White NA Fire Main dry riser B_F-SPLER CON Default Cyan NA Fire Sprinklers B_F-ES CON Default Magenta NA Fire Exit sign B_F-RSCD CON Default Red NA Fire resisting self
closing doors
B_F-EM-L CON Default Green NA Fire Emergency lights
B_F-BK CON Default White NA Fire Blanket B_F-EL CON Default Magenta NA Fire Escape ladder B_F-GNT CON Default Yellow NA Fire General
notes/text B_F-SC center Default white NA Fire system cables
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_F-CJB CON Default Blue NA Fire Cables junction box
B_PA-SPK CON Default white NA Speakers B_PA-APF CON Default Green NA Amplifier B_PA-MIC CON Default Magenta NA Microphone B_PA-MIX CON Default Green NA Amplifier Mixer B_PA-CPR CON Default Cyan NA Cassette
player/Radio B_PA-GNT CON Default Yellow NA P.A System
General notes/text B_PA-VC CON Default Red NA P.A System
Volume control B_PA-SC dashed Default White NA P.A System cables B_PA-CJB CON Default Blue NA P.A System cables
junction box B_L-LIEP CON Default White NA Lightning inspection
earth pit B_L-LCTR dashed Default Green NA Lightning conductor B_L-LPETP CON Default Red NA Lightning protection
Earth test point B_L-LER CON Default Yellow NA Lightning earth rod B_L-LGNT CON Default Yellow NA Lightning General
notes/text B_CCTV-CA CON Default White NA CCTV Camera B_CCTV-OC CON Default Green NA CCTV Object
Censor B_CCTV-M CON Default Magenta NA CCTV Monitor B_CCTV-R CON Default Green NA CCTV Recorder B_CCTV-VR CON Default Cyan NA CCTV Video
Display & Recorder B_CCTV-MP CON Default Yellow NA CCTV Main control
panel B_CCTV-GNT
CON Default Yellow NA CCTV General notes/text
B_CCTV-SC center Default White NA CCTV System cables
B_CCTV-CJB CON Default Blue NA CCTV Cables junction box
B_CCTV- CON Default White NA CCTV Motion
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
MDD detector devices B_CCTV-SAC
CON Default Magenta NA CCTV Security Access control panel
B_CCTV-PGB
CON Default White NA CCTV Car parking gate barrier
B_TV-CCO CON Default White NA TV Coaxial cable outlet
B_TV-CDA CON Default Green NA TV/Cable/Dish Antenna
B_TV_GNT CON Default Magenta NA TV General Notes / Text
B_TV-SP CON Default Magenta NA TV splitter B_TV-CJB CON Default Blue NA TV cables junction
box B_TV-SC Dashed Default White NA TV system cables B_TV-SDB CON Default Green NA TV system
Distribution Board B_TV-CR CON Default White NA TV cables Riser B_TEL-CT DASH Default Yellow NA Telephone cable
trays B_TEL-O CON Default White NA Telephone outlets B_TEL-MJB CON Default Green NA Telephone main
junction box B_TEL-BWL Center Default Yellow NA Telephone block
wiring line B_TEL-R CON Default Magenta NA Telephone Riser B_TEL-ADTS CON Default Cyan NA Access to
Development for tel. service
B_TEL-BL CON Default Green NA Building layout B_TEL-BLP CON Default Yellow NA Boundary layout of
the plot B_TEL-PSD CON Default Red NA Plots GIS sheet
data B_TEL-MID Center Default Magenta NA Q.tel main incoming
Duct B_TEL-PABX CON Default Blue NA Q.tel main PABX B_TEL-GNT CON Default Yellow NA Q.tel
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
General notes/text B_TEL-MHJB CON Default White NA Telephone
manhole/joint box B_COMP-CT HIDDE
N Default Yellow NA Computer Cable
trays B_COMP-PI CON Default White NA Computer
point individual B_COMP-POB
CON Default Green NA Computer+Tel+power outlet box
B_COMP-PUF
Dashed Default Magenta NA Computer+Tel+powe under. floor trunking
B_COMP-MS CON Default Green NA Computer main server
B_COMP-GNT
CON Default Yellow NA Computer general notes/text
B_COMP-CJB
CON Default White NA Computer junction box
B_COMP-SCR
Center Default White NA Computer system cables route
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
13 Appendix 4.0 - Layering Standards - Building Architectural Features
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_AR_ACESS CON Default Red NA Main Gates B_AR_ACESR CON Default Red NA door stopper, roll
holder, coat hooks, soap tray etc.
B-AR_BEXST CON Default 31 NA Existing Buildings B_AR_BPROP CON Default Green NA Proposed Building B_AR_BFUTR Hidde
n2 Default Yellow NA Future Building
B_AR_BWALL CON Default Yellow NA Boundary wall or Fence
B_AR_CARS CON Default Cyan NA Car blocks in Plans or Elevations
B_AR_COL CON Default Yellow NA Column Positions in Architectural Plans
B_AR_C-SHD CON Default 253 NA Column Hatch B_AR_DTLS CON Default Green NA Architectural
Details B_AR_DIM CON Default Cyan NA Dimension for Plan,
Elevation, Section &Detail
B_AR_DOORS CON Default Red NA Door Blocks B_AR_DTAGS CON Default Yellow NA References for
Door Elevations, Detail & Schedules
B_AR_ELEV1 CON Default White NA Nearest Elevation View
B_AR_ELEV2 CON Default Magenta NA Second Elevation View
B_AR_ELEV3 CON Default Yellow NA Third Elevation View
B_AR_ELEV4 CON Default Red NA Fourth Elevation View
B_AR_ELEV5 CON Default Cyan NA Fifth Elevation ViewB_AR_F-SAN CON Default Red NA Sanitary fittings for
Toilet Blocks, Baths & Kitchens
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
B_AR_F- LTS CON Default Red NA Showing light Positions in Architectural Plan
B_AR_FURN CON Default Cyan NA Furniture Layout B_AR_FRFIN CON Default Yellow NA Floor Finishing
Schedule & Descriptions
B_AR_GRIDS Center2
Default Cyan NA Grid Lines
B_AR_GDNOS CON Default Yellow NA Grid References B_AR_HATCH CON Default Red NA Different Hatch
Patterns B-AR_H-SLD CON Default 253 NA Solid Hatch Pattern B_AR_HIDN Hidde
n2 Default Red NA Show all dotted
lines B_AR_ILOCK CON Default 14 NA Paving tiles
(Interlock) B_AR_K-STN CON Default Red NA Kerb Stone Layout B_AR_L-GRN CON Default 96 NA Green Area (Grass
etc.) B-AR_L-SRB CON Default 96 NA Shrubs B_AR_L-TRS CON Default 96 NA Trees B_AR_LGNDS CON Default Yellow NA Legends, Symbols
References etc.. B_AR_PRCL Cente
r2 Default Green NA Policy Plan
B_AR_PARKG CON Default Cyan NA Parking Area B_AR_PEL CON Default Cyan NA People Blocks in
Plans or Elevations B_AR_PLAN CON Default White NA Floor Plans B_AR_STAIR CON Default Yellow NA Stair Case & Steps
in Plan B_AR_CEILG CON Default Cyan NA Reflecting Ceiling
Plan B_AR_IMAGE CON Default Cyan NA Place For Images B_AR_ROOF1 CON Default Magenta NA Highest Level For
Roofing B_AR_ROOF2 CON Default Yellow NA Second Level For
Roofing B_AR_ROOF3 CON Default Red NA Third Level For
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Building
Layer Name
Line type
Line weight
Color
Symbol
Description
Roofing B_AR_ROOF4 CON Default Cyan NA Fourth Level For
Roofing B_AR_SECT CON Default White NA Architectural
Sections & Details B_AR_S-EL1 CON Default Yellow NA Nearest Elevation
in Sections B_AR_S-EL2 CON Default Red NA Far Elevation in
Sections B_AR_TEXT1 CON Default Magenta NA Title, References
Text etc.. B_AR_TEXT2 CON Default Yellow NA Labeling Text B_AR_T-NTS CON Default Yellow NA General Notes B_AR_T-CRD CON Default Yellow NA Coordinates Text B_AR_T-LVL CON Default Yellow NA Floor, Elevation or
Section Levels B_AR_TILES CON Default 8 NA Floor Tiles B_AR_URBAN CON Default Cyan NA GIS Data B_AR_WNDOW
CON Default Red NA Window Blocks
B_AR_WTAGS CON Default Yellow NA References for Window Elevations, Details & Schedules
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
14 Appendix 5.0 - Buildings Attributes
Buildings Mechanical, Electrical, Structural, Architectural
Feature Name
Layer Name Description Feature Type
ReferenceAttribute
Buildings B-AR_BEXST Existing Buildings Polyline 1 Buildings B_AR_BPROP Proposed
Buildings Polyline 1
Buildings B_AR_BFUTR Future Buildings Polyline 1 Elevation B_AR_ELEV Elevations Polyline 2 Roofing B_AR_ROOF Roofing Polyline 3 Sections B_AR_SECT Sections Polyline 4
Accessories B_AR_ACESR Accessories like door stopper etc
Polyline 5
Doors B_AR_DOORS Doors fixtures Polyline 6 Sanitary B_AR_F-SAN Sanitary fittings Polyline 7 Lighting B_AR_F-LTS Light Fittings Polyline 8 Furniture B_AR_FURN Furniture Polyline 9 Parking B_AR_PARKING Vehicle Parking Polyline 10
Windows B_AR_WINDOWS Windows Polyline 11 Walls B_AR_WALL Walls Polyline 12
Columns B_AR_C-SHD Columns Polyline 13 Steps B_AR_STEPS Stair case and
Ramps Polyline 14
Tiles B_AR_TILES Floor Tiles Polyline 15 Columns B_ST-COLUMNS Columns Polyline 13
Circle B_ST-CRICLE Slab thickness Polyline 16 Steps B_ST-STEPS Stair case and
ramps Polyline 14
Blinding B_ST-BLINDING Blinding Polyline 13 Angles B_ST-ANGLES Angles Polyline 18
Columns B_ST-Column_ST Stub column Polyline 13 Columns B_ST-Column_PC Planted Column Polyline 13 Footings B_ST-Footings Footings Polyline 13 Rafter B_ST-Rafter Beams Polyline 13 Purling B_ST-Purlins Bolts Polyline 13 Levels B_AR_T-LVL Level of Floors Polyline 21
Block Work B_ST-BLOCKWORK
Block Works Polyline 22
Wall B_ST-WALL Walls Polyline 12 Lighting B_E_LF Light Fittings Polyline 8
Fan B_E-SL Fan Switches Polyline 23
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Feature Name
Layer Name Description Feature Type
ReferenceAttribute
Power B_E-POWER Low Power outlets, Ac outlets,
isolators
Polyline 24
Fans B_E_EXF-CF Exhaust fans, Ceiling Fans
Polyline 43
Switch Board B_E_MSB-DB Main Switch Board or Distribution
Board
Polyline 25
Distribution Board
B_E_DBB Electrical Distribution Board
Block
Polyline 26
Cable ducts B_E_CD Cable ducts Polyline 27 Manhole B_E_MH Manhole Polyline Ref Roads Detectors B_F-HSD Fire Heat and
Smoke detectors Polyline 28
Extinguishers B_F-ETS Fire Extinguishers Polyline 29 Bell B_F-AB-CP Alarm bell and call
Point Polyline 30
Alarm B_F-AMP Fire Alarm Main Panel
Polyline 31
Sprinkler B_F-SPLER Fire Sprinklers Polyline 32 Lighting B_F-EM-L Fire Emergency
Light Polyline 33
Air Handling Unit
B_HVAC_AHU Air Handling unit Polyline 39
Chiller B_HVAC_CH Chiller Unit Polyline 40 Floor Plan B_AR_PLAN Floor plan Polyline 40.1
Pipe B_HVAC_ChP Chilled Pipe Polyline 41 pump B_HVAC_CHP Chilled water
pump Polyline 42
Pump B_HVAC_CiP Circulating Pumps Polyline 42 Fan B_HVAC_EF Exhaust fan Polyline 43 Duct B_HVAC_ED Exhaust Duct Polyline 44 Duct B_HVAC_ExD Existing Duct Polyline 44
Air Condition B_HVAC_Fs Air Conditioning Fittings
Polyline 45
Duct B_HVAC_FID flexible Duct Polyline 44 Diffuser B_HVAC_RD Return Diffuser Polyline 46 Diffuser B_HVAC_SD Supply Diffuser Polyline 46 Diffuser B_HVAC_ED Extract Diffuser Polyline 46 Diffuser B_HVAC_Dm Dummy Diffuser Polyline 46 Grille B_HVAC_RG Return Grille Polyline 46
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Feature Name
Layer Name Description Feature Type
ReferenceAttribute
Grille B_HVAC_SG Supply Grille Polyline 46 Air Condition B_HVAC_WAC Window Air
Conditioning Polyline 47
Air condition B_HVAC_SAC Split Air Conditioning
Polyline 48
Fan B_HVAC_FCU Fan coil unit Polyline 49 Heater B_MeP_WH Electric Water
Heater Polyline 50
Tank B_MeP_EWT Elevated water tank
Polyline 51
Tank B_MeP_eEWT Existing Elevated water tank
Polyline 51
Tank B_MeP_eGWT Existing ground water tank
Polyline 51
Tank B_MeP_eRWT Exixting Roof water tank
Polyline 51
Tank B_MeP_GWT Ground water tank Polyline 51 Sprinkler B_MeP_SN Sprinklers Nozzle Polyline 52 Sprinkler B_MeP_SMPL Sprinkler main
pipe line Polyline 53
Chamber B_MeP_VC Valve chamber Polyline Ref Drainage
Attributes 1; Existing, Proposed, Future Buildings Field Name Description Field
Type Field width
Reference Table
Owner Type of building C 50 1 Name Name of the Building C 50 Type_Code Sub Type of Building C 10 1.1 Area Area in Metre x Metre N 10 Length Length in Metre N 10 Width Width in Metre N 10 Height Height of the building N 10 No_Of_Floors No of floors of the
building N 5
Proj_No Project number N 5 Table 1 Value Description P Private
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
G Governmental Table 1.1 Type Type Code Description Schools SCEB Elementary Boys School SCEG Elementary Girls School SCPB Primary Boys School SCPG Primary Girls School SCSB Secondary Boys School SCSG Secondary Girls School SCDG Deaf Girls School SCNM New Model School SCHS Handicapped School SCPB Preparatory Boys School SCPG Preparatory Girls School SCIS Industrial School SCMS Model Schools SCNS Nursing School SCKG Kindergarten SCGT Gifted and Talented
School Mosques MODF Daily Friday MODA Daily MOIH Imam House MOEP Eid Praying Area MOMP Mens Praying Area MOLP Ladies Praying Area Medical Services MEPH Primary Health Centres MEDC Dental Clinics MEVC Veterinary Clinic MEHO Hospital MEDM Dermatology Clinic MEEM Emergency Medical
Services MECH Children Hospital MEPY Psychiatric hospital MEOP Out Patient clinic Central market CMFS Fisheries CMPM Poultry and Mutton CMVG Vegetable CMSH Slaughter House CMLS Live Stock CMBM Birds Market
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Type Type Code Description Ports & Harbours PHCT Container Terminal PHIY Inspection yard PHST Staff Accommodation PHFH Fishing Harbour PHYH Yatch Hanger PHSD Sheds PHCH Cargo Handling Museums MUWM Weapons Museum MUQI Qatar Islamic Arts
Museum MUCT Traditional Costumes &
Textiles Museum MUQN Qatar National Museum Parks & Playgrounds PPLF Ladies and Family PPGP General Public PPPG Playgrounds Laboratories LASD Seeds LAFC Food Control LAMT Material LAPT Plant Tissue Culture LAGE Genetic Engineering LADL Drainage Laboratory LACM Chemical Materials LAAW Agriculture & Water
Research LARC Rodent Control LAMC Measurement &
Calibration
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 2 : Elevations
Field Name Description Field Type Field width Reference Table
Type Type of elevation
C 50 2.1
Height Height of elevation
N 10
Dimension Dimensions N 10 Material Material used C 50 Material table Proj_No Project
number N 50
Table 2.1 Value Description Elev 1 Nearest Elevation Elev 2 Second Elevation Elev 3 Third Elevation Elev 4 Fourth Elevation Elev 5 Fifth Elevation
Attribute 3 : Roofing Field Name Description Field Type Field width Reference
Table Type Type of
roofing C 50 3.1
Height Height of roofing
N 10
Dimension Dimensions N 10 Material Material used C 50 Material TableProj_No Project
number N 15
Table 3.1 Value Description Roof 1 Highest Level for Roofing Roof 2 Second Level For Roofing Roof 3 Third Level For Roofing Roof 4 Fourth Level For Roofing
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 4; Sections
Field Name Description Field Type Field width Reference Table
Type Type of Section
C 50 4.1
Dimension Dimensions N 10 Num_Sec Number of
sections N 10
Material Material Used C 50 Material TableProj_No Project
number N 50
Table 4.1 Value Description SN Nearest Elevation in Sections SF Far Elevation in Sections VS Vertical Section FS Footing Section SS Sill section Attributes 5: Accessories Field Name Description Field Type Field width Value Type Type of
accessories Polyline 50
Material Material used Polyline 50 See Material table
Quantity Number of accessories
Polyline 15
Proj_No Project number
N 50
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 6; Doors Field Name Description Field Type Field width value Type Type of door C 30 Material Material used C 30 See Material
table Thickness Thickness of
the door N 10
Height Height of the door
N 10
Quantity Total number of doors
N 10
Location Location of doors
C 30
Open_ Dim Opening dimension
N 10
Frame_Dim Frame dimension
N 10
Proj_No Project number
N 50
Attributes 7: Sanitary fittings Field Name Description Field Type Field width value Manftr Manufacturer C 50 Sealing Sealing used C 25 Con_to Connected to C 15 Proj_No Project
number N 50
Attributes 8; Light Fittings Field Name Description Field Type Field width value Type Type of
lighting C 50
Position Position of the lighting
C 20
Power Power in voltage
N 10
Name Name of the lighting
C 20
Location Location fitted C 15 Proj_No Project
number N 50
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 9: Furniture Field Name Description Field Type Field width value Type Type of
furniture C 50
Location Location C 25 Name Name of the
furniture N 15
Proj_No Project number
N 50
Attributes 10: Parking Field Name Description Field Type Field width value Area Parking Area
m/s N 10
Capacity Capacity of vehicles
N 10
Location Location C 15 Proj_No Project
number N 50
Attributes 11: Windows Field Name Description Field Type Field width value Type Type of
window C 10
Material Material N 10 See Material table
Size Size of the window
C 25
Quantity Total number of windows
N 10
Location Location of the window
C 50
Opening_ Dim Opening dimension
N 10
Frame_ Dim Frame dimension
N 10
Proj_No Project number
N 50
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 12: Walls Field Name Description Field Type Field width value Type Type of wall C 50 Material Material C 10 See Material
table Height Height N 10 Thickness Thickness N 25 Proj_No Project
number N 50
Attributes 13: Column, Beams, Footings, Blinding, Rafter, purling Field Name Description Field Type Field width Reference
Table Type Type C 50 13.1 Material Material C 10 See Material
table Height Height of the
column N 10
Subtype Sub type of columns
C 5
Code Code used to identify
N 10
Proj_No Project number
N 50
Table 13.1 Type Sub Type Code Columns Planted Column Pc Columns Stub Column Sc Columns Steel Column Stc Columns Reinforced Column Rc Beams Concrete Beam Cb Beams Steel Beam Sb Purling Pu Rafter Raf Blinding Bl Footings Fo
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 14: Steps, ramps Field Name Description Field Type Field width Reference
Table Type Type C 10 Height Height of each
step N 10
No Steps Number of steps
N 25
Material Material C 50 See Material table
Width Width N 10 Proj_No Project
number N 50
Attributes 15: Tiles Field Name Description Field Type Field width Reference
Table Type Type C 10 Dim Dimension N 10 Material Material C 50 See Material
table Proj_No Project
number N 50
Attributes 16: Circle Field Name Description Field Type Field width Reference
Table Type Type C 50 Material Material C 10 See Material
table Dia Dimension in
diameter N 10
Proj_No Project number
N 50
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 18: Angles
Field Name Description Field Type Field width Reference Table
Type Type C 50 Material Material C 10 See Material
table Angle Angle N 10 Length Length N 10 Proj_No Project
number N 25
Attributes 20: Bolts Field Name Description Field Type Field width Reference
Table Type Type of bolts C 10 length Length N 10 Total_No Total number
of bolts N 10
Proj_No Project number
N 25
Attributes 21: Levels Field Name Description Field Type Field width Reference
Table Height Height of each
floor N 10
Tot_Floor Total number of floors
N 10
Floor_sec Number of sections per floor
N 10
Proj_No Project number
N 25
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 22: Block Work Field Name Description Field Type Field width Reference
Table Type Type C 10 Brand Brand C 10 Position location C 10 Proj_No Project
number N 25
Attributes 23: Light Fittings & Fan Switches Field Name Description Field Type Field width Reference
Table Type Type C 10 Brand Brand or
manufacturer C 10
Position Position or location
C 10
Proj_No Project number
N 25
Attributes 24: Power Field Name Description Field Type Field width Reference
Table Power Voltage C Brand Name C 10 Position Location or
position C 10
Proj_No Project number
N 25
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 25; Main Switch or Distribution Board Field Name Description Field Type Field width Reference
Table Type Type C 10 Capacity Capacity in
volts N 10
Brand Brand C 10 Length Point to Point N 10 Material Material C 25 See Material
table Proj_No Project
number N 25
Attributes 26: Electrical Distribution Board Field Name Description Field Type Field width Reference
Table Type Type C 50 Capacity Capacity in
volts N 50
Brand Brand C 50 Material Material C See Material
table Location Location C 50 Proj_No Project
number N 25
Attributes 27: Cable Ducts Field Name Description Field Type Field width Reference
Table Type Type C 50 Capacity Capacity N 50 Brand Brand C 50 Location Location C 50 No_ETS Number N 10 Proj_No Project
number N 25
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 28: Fire heat and smoke detectors Field Name Description Field Type Field width Reference
Table Type Type C 25 Capacity Capacity C 25 Manufacturer Manufacturer C 25 Temp Temperature N 10 Location location C 50 Smoke_Det Smoke
detector C 25
Heat_Det Heat detector C 25 No_Det Number of
detectors N 10
Proj_No Project number
N 25
Attributes 29; Fire Extinguishers
Field Name Description Field Type Field width Reference
Table Location Location C 50 Type Type C 25 Name Name Character 25 Proj_No Project
number N 25
Attributes 30 : Alarm Bell Call Point Field Name Description Field Type Field width Reference
Table location Location C 50 Name Name N 15 Proj_No Project
number N 25
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attributes 31: Fire Alarm main panel Field Name Description Field Type Field width Reference
Table Type Type C 50 Dim Dimension N 15 Area Location C 50 Proj_No Project
number N 25
Attributes 32: Fire Sprinkler Field Name Description Field Type Field width Reference
Table Type Type C 50 Temp_rate Temperature
rate N 15
Proj_No Project number
N 25
Attributes 33: Emergency lighting Field Name Description Field Type Field width Reference
Table Type Type C 50 Area Location N 15 Proj_No Project
number N 25
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 39: Air Handling Unit Field Name Description Field Type Field width Reference
Table AHU_Ref Air handling
unit reference number
N 10
Type C 50 Area Area Served N 15 Supply_Air Supply Air
CFM9each0 N 50
Fresh_Air Fresh Air CFM(each)
N 50
Air_on_coil Air on coil N 15 Air_off_coil Air off Coil N 15 Coolin_Cap Cooling coil
capacity TR N 15
Water_Flow Water Flow in sgpm
N 15
External External St. Pr in (Wg)
N 15
Ent_Temp Entering water temperature
N 15
Leav_Temp Leaving water Temperature
N 15
Fan_Volt Fan motor voltage supply
N 15
Location Location installed
C 50
Proj_No Project number
N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 40: Chiller Unit Field Name Description Field Type Field width Reference
Table Manufacturer Manufacturer
and model N 10
Type Type of air chillier
C 50
Num_unit Number of units
N 10
On_Coil On Coil condition
N 15
Off_Coil Off Coil condition
N 50
Capacity Capacity in TR
N 50
Cooler_Flow Cooler Flow USGM
N 15
Chill_In Chilled water in temperature
N 15
Chill_out Chilled water out temperature
N 15
Scale_Fact Scale factor N 15 Press_Drop Permissible
pressure drop across cooler (in ft)
N 15
Air_Cond Air on Condenser
N 15
Number Number of Compressors
N 15
Drive_Type Type of drive C 25 Motor_Type Type of Motor C 25 Location Location
installed C 25
Motor_Comp F L A of each compressor motor
C 25
Proj_No Project number
N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 41; Chilled Pipe Field Name Description Field Type Field width Reference
Table Type Type C 50 Ref Table
10.1 Name Name C 50 Length Length of the
pipe C 50
Capacity Capacity of the pipe
N 50
Dimension Dimension C 50 Proj_No Project
number N 50
Attribute 42: Chilled water pumps, Circulating Pump Field Name Description Field
Type Field width Reference
Table Type Type of Water
Pump C 50
Manufacturer Manufacturer and model
N 10
Capacity Capacity of the water pump USGPM
N
Head Pump working head
N 15
Flow_Rate Flow rate N 25 In_Pres Pump inlet
pressure N 10
Out_Pre Pump Outlet pressure
N 10
Motor_Pow Motor power N 25 Location Location installed C 25 Num_Pump Number of Pumps N 25 Proj_No Project number N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 43: Exhaust Fan Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Type Type of Exhaust fan C 50 Area Area served N 15 Mot_Man Motor manufacturer N 15 Tot_Out Total Number of
Outlets CFM N 15
Tot_Stat Total Static pressure external
N 15
In_Pres Inlet Pressure N 15 Dis_Pres Discharge pressure N 15 Fan_Rpm Fan rpm N 15 Amp Amperes N 15 Volt Voltage N 15 Motor Motor Rpm N 15 Cap Capacitor N 15 Mot_Grov Motor sheaves & No
of Grooves N 15
Fan_Grov Fan sheaves & No of Grooves
N 15
Num_Tot Total Number of exhaust fans
N 25
Proj_No Project number N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 44: Exhaust Duct, Existing duct, Flexible duct Field Name Description Field
Type Field width Reference Table
Manufacturer Manufacturer and model
N 25
Type Type of Water Pump
C 50
Des_Vol Design volume m3/s
N 10
Size Duct Size mm N 10 Area Duct Area mxm N 10 Velocity Velocity m/s N 10 Pressure Static pressure N 10 Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_units Total Number of
exhaust fans N 25
Proj_No Project number N 15 Attribute 45: Air Conditioning Fittings Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Type Type of Exhaust fan C 50 Area Area served N 15 Num_Tot Total Number of
exhaust fans N 25
Proj_No Project number N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 46 : Return diffuser, Dummy diffuser, Supply Diffuser, Return grille, Supply Grille, Extract diffuser Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 25
Type Type of Water Pump C 50 Design Design N 10 46 1 Measured Measured 46.1.1 Location Number of units N 10 Cor_Fact Correction Factor N 10 Num_Ter Terminal Number N 25 Proj_No Project number N 15 Table GD 1 Value Description Free_Area Free Area in meter square Volume Volume in meter cube / s Table GD1.1 Value Description Velocity Velocity in meter square Volume Volume in meter cube / s Attribute 47: Window air conditioning Field Name Description Field Type Field width Reference
Table Manufacturer Manufacturer
and model N 10
Type Duty of the Air Conditioner
N 50
Area Area served C 15 Num_Tot Total Number
of Window Air conditioner
N 25
Proj_No Project number
N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 48: Split air conditioning Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Type Duty of the Air Conditioner
N 50
Area Area served C 10 Capacity Nominal capacity N 10 Power Electrical supply
power N 10
Num_Tot Total Number of Split Air conditioner
N 10
Proj_No Project number N 15 Attribute 49: Fan coil Unit Field Name Description Field Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Type Duty of the Air Conditioner
N 50
Area Area served C 10 Air_Cap Air Quantity CFM N 10 Air_Coil Air on Coil DB /
WB N 10
Cool_Coil Cooling coil capacity TR (BTU/HR)
N 10
Water_flow Water Flow N 10 Pressure External static
Pressure N 10
Num_Tot Total Number of Split Air conditioner
N 10
Proj_No Project number N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 50: Electric water heater Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Area Area served C 10 Capacity Nominal capacity N 10 Power Electrical supply
power N 10
Num_Tot Total Number of Water Heaters
N 10
Proj_No Project number N 15 Attribute 51: Water tank, Elevated water tank, existing ground water tank, existing roof water tank, ground water tank Field Name Description Field
Type Field width Reference
Table Manufacturer Manufacturer and
model N 10
Area Area served C 10 Capacity Nominal capacity N 10 Num_Tot Total Number of
Water Tanks N 10
Proj_No Project number N 15 Attribute 52: Sprinkler nozzle Field Name Description Field
Type Field width Reference
Table Type Type N 10 Material Material used C 15 See material
table Model Manufacturer and
model C 15
Size Radius of coverage N 10 Area Area served C 10 Capacity Nominal capacity N 10 Temp temperature N Num_Tot Total Number of
Sprinklers nozzles N 10
Proj_No Project number N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Attribute 53: Sprinkler main pipe line Field Name Description Field Type Field width Reference
Table Manufacturer Manufacturer
and model N 10
Area Area served C 10 Capacity Nominal
capacity N 10
Length Length of the pipe
N 10
Proj_No Project number
N 15
Attribute 40.1 Floor Plan or Site Plan Field Name Description Field Type Field width Reference
Table Dimension Dimensions C 10 Code Code for
doors, windows etc
C 20
Proj_No Project number
N 15
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Material Table Material Type Code Iron Ir Steel St PVC Pv Plastic Ps Gravel Gr Crushed Brick Ck Crushed Concrete Cc Hoggin Ho Quarry Waste Qw Tile Tl Brass Br Aluminium Al Copper Co Alloy Ay Wood Wo Cloth Cl Glass Gl Cement Ce Sand Sa Bitumen Bi Polythene Po Stone Sn Brick Bk Timber Tm Hallow blocks Hb Concrete Blocks Cb If others please specify in the attributes (material)
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
15 Appendix 6.0 - Layering Standards - Drainage
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_Z_DIMS CON 0 RED Default Dimensioning D_Z_DWGSHT CON 1 WHITE Default Title Block D_Z_REV CON 2 YELLOW Default Revision Clouds and
Triangle D_Z_NORTH CON 4 GREEN Default North Point D_Z_SECMK CON 4 GREEN Default Section and Detail
Marks D_Z_18TEXT CON 0 RED Default Text at respective height D_Z_25TEXT CON 1 WHITE Default Text at respective height D_Z_35TEXT CON 2 YELLOW Default Text at respective height D_Z_50TEXT CON 3 GREEN Default Text at respective height D_Z_70TEXT CON 4 CYAN Default Text at respective height D_C_18OUT CON 0 RED Default All very thin outlines D_C_25OUT CON 1 WHITE Default All thin outlines D_C_35OUT CON 3 YELLOW Default All outlines in
plan/elevation D_C_50OUT CON 4 GREEN Default All concrete outlines in
section D_C_18PIPE CON 2 RED Default Pipe work
outlines/fittings D_C_18PIPEHID HID 3 RED Default Pipe work hidden lines D_C_50REBARS CON 4 GREEN Default Reinforcement details D_C_18GRID CEN 0 RED Default Grid lines/map grid lines D_C_18HATCH CON 0 RED Default All hatching D_C_25DASH DASH 1 WHITE Default Hidden detail D_C_25HID HID 1 WHITE Default Hidden detail D_C_Bund CON 2 YELLOW Default Bund outlines D_C-EXT_GRND DASH 1 WHITE Default Existing ground level D_C-FRL DASH 1 WHITE Default Finished road level D_C-PRO_COV_LEV
DASH 1 WHITE Default Proposed cover level
D_C-SEWER_SEC
CON 1 MAGENTA Default Pipe section
D_C-MH_SEC CON 1 MAGENTA Default Manhole section
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_C-TEXT TEXT 1 WHITE Default Text D_C-TABLE TEXT 1 WHITE Default Tables D_EX_SEW_ ABD
CON 0 30 Default Abandon Sewer Lines
D_ EX_SEW_ RE CON 1 30 Default Refur/refined/Replaced Sewer Lines
D_EX_DAB CON 1 GREEN Default Existing Drainage Area Boundary
D_EX_SB CON 1 CYAN Default Site Boundary D_PR_DAB CON 1 GREEN Default Proposed Drainage
Area Boundary D_U_ELEC-OH CON Default WHITE Default Electrical Cable
Overhead D_U_ELEC-UG CON Default WHITE Default Electrical Cables
Underground D_U_HVOLT CON Default WHITE Default High Voltage Electrical
Cables D_U_LVOLT CON Default WHITE Default Low Voltage Electrical
Cables D_U_FENCE CON Default WHITE Default Fence Line D_U_TEL CON Default WHITE Default Telephone Line D_U_GAS CON Default WHITE Default Gas Line D_U_WATER CON Default WHITE Default Water Line D_U-OILPIPE CON Default WHITE Default Oil Pipelines D_U_FIBRE OPTIC
CON Default WHITE Default Fibre Optic/CCTV Cable
D_EX_SEWER DASH 1 RED Default Existing_sewer D_EX_SEW_DIR CON 1 RED Default Existing_sewer_flow
direction D_EX_SEW_ID TEXT Default GREEN Default Existing_sewer_id D_EX_SEW_DIA TEXT Default GREEN Default Existing_sewer_diamete
r D_EX_SEW_MAT
TEXT Default GREEN Default Existing_sewer_material
D_EX_SEW_LEN TEXT Default GREEN Default Existing_sewer_length D_EX_SEW_CUM_POP
TEXT Default GREEN Default Existing_sewer_cumulative_population
D_EX_SEW_HC_POP
TEXT Default GREEN Default Existing_sewer_connectiing_population
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_EX_SEW_DS_MH
TEXT Default GREEN Default Existing_sewer_upstream_manhole
D_EX_SEW_US_MH
TEXT Default GREEN Default Existing_sewer_downstream_manhole
D_EX_MANHOLE
CIRCLE
1 MAGENTA Default Existing_manhole
D_EX_MH_ID TEXT Default GREEN Default Existing_manhole_id D_EX_MH_COV_LEV
TEXT Default GREEN Default Existing_manhole_cover level
D_EX_MH_INV_LEV
TEXT Default GREEN Default Existing_manhole_invert level
D_EX_MH_DEPTH
TEXT Default GREEN Default Existing_manhole_depth
D_EX_MH_TYPE TEXT Default GREEN Default Existing_manhole_type(ramp/bdrop)
D_EX_MANHOLE-1
CIRCLE
1 YELLOW Default Existing_manhole-1
D_EX_MH-1_ID TEXT Default GREEN Default Existing_manhole-1_id D_EX_MH-1_COV_LEV
TEXT Default GREEN Default Existing_manhole-1_cover level
D_EX_MH-1_INV_LEV
TEXT Default GREEN Default Existing_manhole-1_invert level
D_EX_MH-1_DEPTH
TEXT Default GREEN Default Existing_manhole-1_depth
D_EX_HOUSCON
DASH 1 ROSE Default Existing_house connection
D_EX_HC_ID TEXT Default GREEN Default Existing_house connection_id
D_EX_HC_DIA TEXT Default GREEN Default Existing_house conetion_diamtr
D_EX_HC_MAT TEXT Default GREEN Default Existing_house connection_material
D_EX_HC_LEN TEXT Default GREEN Default Existing_house connection_length
D_EX_HC_TYPE TEXT Default GREEN Default Existing_house con_type(ramp/bdrop)
D_EX_HC_STUB TEXT Default GREEN Default Existing_house connection_stub end
D_EX_RISINGMAIN
DASH 1 BLUE Default Existing_rising main
D_EX_RM_ID TEXT Default GREEN Default Existing_risingmain_id
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_EX_RM_DIA TEXT Default GREEN Default Existing_risingmain_diameter
D_EX_RM_MAT TEXT Default GREEN Default Existing_risingmain_material
D_EX_RM_LEN TEXT Default GREEN Default Existing_risingmain_length
D_EX_PUMPINGSTATION
DASH 1 DARK RED Default Existing_pumping station
D_EX_PS_ID TEXT Default GREEN Default Existing_pumping station_id
D_EX_PS_COV_LEV
TEXT Default GREEN Default Existing_pumping station_cover level
D_EX_PS_INV_LEV
TEXT Default GREEN Default Existing_pumping station_invert level
D_EX_PS_DEPTH
TEXT Default GREEN Default Existing_pumping station_depth
D_EX_PS_CAPACITY
TEXT Default GREEN Default Existing_pumping station_pump capacity
D_EX_PS_HEAD TEXT Default GREEN Default Existing_pumping station_total head
D_EX_PS_SEW_INV
TEXT Default GREEN Default Existing_p/s_incomming sewer_invert
D_EX_PS_SEW_DIA
TEXT Default GREEN Default Existing_p/s_incomming sewer_diameter
D_EX_PS_SCADA
TEXT Default GREEN Default Existing_pumping station_SCADA System
D_EX_VALVE_CHAMBER
DASH 1 ORANGE Default Existing_valve chamber
D_EX_VC_ID TEXT Default GREEN Default Existing_valve chamber_id
D_EX_VC_COV_LEV
TEXT Default GREEN Default Existing_valve chamber_cover level
D_EX_VC_INV_LEV
TEXT Default GREEN Default Existing_valve chamber_invert level
D_EX_VC_DEPTH
TEXT Default GREEN Default Existing_valve chamber_depth
D_EX_VC_TYPE TEXT Default GREEN Default Existing_valve_type D_EX_VC_RM_DIA
TEXT Default GREEN Default Existing_valve_rising main _diameter
D_EX_FLOWMETER_CHAMBER
DASH 1 ORANGE Default Existing_flowmeter chamber
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_EX_FM_ID TEXT Default GREEN Default Existing_flowmeter chamber_id
D_EX_FM_COV_LEV
TEXT Default GREEN Default Existing_flowmeter chamber_cover level
D_EX_FM_INV_LEV
TEXT Default GREEN Default Existing_flowmeter chamber_invert level
D_EX_FM_DEPTH
TEXT Default GREEN Default Existing_flowmeter chamber_depth
D_EX_FM_TYPE TEXT Default GREEN Default Existing_flowmeter_type D_EX_FM_RM_DIA
TEXT Default GREEN Default Existing_flowmeter_rising main _diameter
D_EX_SURGEVESSAL_CHAMBER
DASH 1 ORANGE Default Existing_surgevessal chamber
D_EX_SV_ID TEXT Default GREEN Default Existing_surgevessal chamber_id
D_EX_SV_COV_LEV
TEXT Default GREEN Default Existing_surgevessal chamber_cover level
D_EX_SV_INV_LEV
TEXT Default GREEN Default Existing_surgevessal chamber_invert level
D_EX_SV_DEPTH
TEXT Default GREEN Default Existing_surgevessal chamber_depth
D_EX_SV_TYPE TEXT Default GREEN Default Existing_surgevessal_capacity
D_EX_SV_RM_DIA
TEXT Default GREEN Default Existing_ surgevessal _rising main _diameter
D_EX_AIRVALVE_CHAMBER
DASH 1 ORANGE Default Existing_airvalve chamber
D_EX_AV_ID TEXT Default GREEN Default Existing_airvalve chamber_id
D_EX_AV_COV_LEV
TEXT Default GREEN Default Existing_airvalve chamber_cover level
D_EX_AV_INV_LEV
TEXT Default GREEN Default Existing_airvalve chamber_invert level
D_EX_AV_DEPTH
TEXT Default GREEN Default Existing_airvalve chamber_depth
D_EX_AV_TYPE TEXT Default GREEN Default Existing_airvalve_type D_EX_AV_RM_DIA
TEXT Default GREEN Default Existing_ airvalve _rising main _diameter
D_EX_WASHOUT_CHAMBER
DASH 1 ORANGE Default Existing_washout chamber
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_EX_WO_ID TEXT Default GREEN Default Existing_washout chamber_id
D_EX_WO_COV_LEV
TEXT Default GREEN Default Existing_washout chamber_cover level
D_EX_WO_INV_LEV
TEXT Default GREEN Default Existing_washout chamber_invert level
D_EX_WO_DEPTH
TEXT Default GREEN Default Existing_washout chamber_depth
D_EX_WO_SUMP
TEXT Default GREEN Default Existing_washout_sump/mh
D_EX_WO_RM_DIA
TEXT Default GREEN Default Existing_ washout chamber_rising main _diameter
D_EX_DISCHARGE_CHAMBER
DASH 1 ORANGE Default Existing_discharge chamber
D_EX_DC_ID TEXT Default GREEN Default Existing_discharge chamber_id
D_EX_DC_COV_LEV
TEXT Default GREEN Default Existing_discharge chamber_cover level
D_EX_DC_INV_LEV
TEXT Default GREEN Default Existing_discharge chamber_invert level
D_EX_DC_DEPTH
TEXT Default GREEN Default Existing_discharge chamber_depth
D_EX_DC_RM_DIA
TEXT Default GREEN Default Existing_incomming _discharge chamber_ rising main _diameter
D_EX_DC_SEW_DIA
TEXT Default GREEN Default Existing_outgoing_ sewer _diameter
D_PR_SEWER CON 1 RED Default Proposed_sewer D_PR_SEW_DIR CON 1 RED Default Proposed_sewer_flow
direction D_PR_SEW_ID TEXT Default GREEN Default Proposed_sewer_id D_PR_SEW_DIA TEXT Default GREEN Default Proposed_sewer_diame
ter D_PR_SEW_MAT
TEXT Default GREEN Default Proposed_sewer_material
D_PR_SEW_LEN TEXT Default GREEN Default Proposed_sewer_length D_PR_SEW_CUM_POP
TEXT Default GREEN Default Proposed_sewer_cumulative_population
D_PR_SEW_HC_POP
TEXT Default GREEN Default Proposed_sewer_connectiing_population
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Drainage
Layer Name Line Type
Line Wt
Colour Symbol Description
D_PR_SEW_DS_MH
TEXT Default GREEN Default Proposed_sewer_upstream_manhole
D_PR_SEW_US_MH
TEXT Default GREEN Default Proposed_sewer_downstream_manhole
D_PR_MANHOLE
CIRCLE
1 MAGENTA Default Proposed_manhole
D_PR_MH_ID TEXT Default GREEN Default Proposed_manhole_id D_PR_MH_COV_LEV
TEXT Default GREEN Default Proposed_manhole_cover level
D_PR_MH_INV_LEV
TEXT Default GREEN Default Proposed_manhole_invert level
D_PR_MH_DEPTH
TEXT Default GREEN Default Proposed_manhole_depth
D_PR_MH_TYPE TEXT Default GREEN Default Proposed_manhole_type(ramp/bdrop)
D_PR_MANHOLE-1
CON 1 YELLOW Default Proposed_manhole-1
D_PR_MH-1_ID TEXT Default GREEN Default Proposed_manhole-1_id D_PR_MH-1_COV_LEV
TEXT Default GREEN Default Proposed_manhole-1_cover level
D_PR_MH-1_INV_LEV
TEXT Default GREEN Default Proposed_manhole-1_invert level
D_PR_MH-1_DEPTH
TEXT Default GREEN Default Proposed_manhole-1_depth
D_PR_HOUSECON
CON 1 ROSE Default Proposed_house connection
D_PR_HC_ID TEXT Default GREEN Default Proposed_house connection_id
D_PR_HC_DIA TEXT Default GREEN Default Proposed_house connection_diameter
D_PR_HC_MAT TEXT Default GREEN Default Proposed_house connection_material
D_PR_HC_LEN TEXT Default GREEN Default Proposed_house connection_length
D_PR_HC_TYPE TEXT Default GREEN Default Proposed_house con_type(ramp/bdrop)
D_PR_HC_STUB TEXT GREEN Default Proposed_house connection_stub end
D_PR_RISINGMAIN
CON 1 BLUE Default Proposed_rising main
D_PR_RM_ID TEXT Default GREEN Default Proposed_risingmain_id
-
AutoCAD Layering Conventions
Public Works Authority TSD/EIS Version 1.0
Draina