Asgard Flexistore 1522 Instructions
4
FLEXISTORE 1522 BASE INSTRUCTIONS Flat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm. Min. base size (WxDxH) 1730mm x 2640mm x 50mm. LEVELING THE UNIT Correctly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment. For maintenance instructions of this product visit www.asgardsss.co.uk Warning: some panels may weigh over 20Kg. Beware of manual handling 6mm Dia. 13mm Spanner 18V x2 SEALANT Posi-Driv Screwdriver It is always recommended to anchor the unit to the ground. Drill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to seal the fixing holes from underneath. TOOLS REQUIRED Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm socket or spanner. ZSCREW32 x8 ZSILCOL1 x1 ZSCREW61 x207 ZSCREW340 x9 ZCOMPPLZS02 x8 ZCOMPPLAS22-23-24 x6 2x 2mm, 2x 3mm, 2x 5mm LH REAR SIDE PANEL 44160 x1 RH REAR SIDE PANEL 44161 x1 RH BACK PANEL 44159 x1 REAR TOP PANEL 44156 x1 FRONT TOP PANEL 44157 x1 LH BACK PANEL 44158 x1 REAR BASE PANEL 44166 x1 FRONT BASE PANEL 44378 x1 FASCIA PANEL 44167 x1 RH FRONT SIDE PNALE 44163 x1 RH FRONT PANEL 44376 x1 DOOR ASSEMBLY 44374 x1 LH FRONT PANEL 44164 x1 LH FRONT SIDE PANEL 44162 x1 Warning: Please keep this key card safe! Refer to if replacement key is required. 00001 YOUR UNIQUE KEY CODE
-
Upload
asgard-secure-steel-storage -
Category
Documents
-
view
249 -
download
6
description
For more information please visit www.asgardsss.co.uk
Transcript of Asgard Flexistore 1522 Instructions
FLEXISTORE 1522BASE INSTRUCTIONSFlat and firm base. Recommended: concrete, tarmac or paving flags. Min. distance from walls/ shrubbery: 1000mm.Min. base size (WxDxH) 1730mm x 2640mm x 50mm.
LEVELING THE UNITCorrectly level the constructed unit using the shims (ZCOMPPLAS) provided prior to fixing the unit to the ground. Slide the packing pieces under the corners of the unit base as required until an equal gap has been achieved around the door allowing for its smooth operation and alignment.
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: some panels may weigh over 20Kg. Beware of manual handling
6mm Dia.
13mm Spanner
18V
x2
SEAL
ANT
Posi-DrivScrewdriver
It is always recommended to anchor the unit to the ground. Drill through the four holes in the base of the unit using 6mm dia masonry drill to a depth of 70mm. Screw in the anchor fixings. (These have a self cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE BUILDING to seal the fixing holes from underneath.
TOOLS REQUIREDPower driver POSI-DRIV screwdriver, 6mm dia. masonry drill, a 13mm socket or spanner.
ZSC
REW
32 x
8
ZSIL
CO
L1 x
1
ZSC
REW
61 x
207
ZSC
REW
340
x9
ZCO
MPP
LZS0
2 x
8
ZCO
MPP
LAS2
2-23
-24
x6
2x 2
mm
, 2x
3mm
, 2x
5mm
LH R
EAR
SID
E PA
NEL
441
60 x
1
RH
REA
R S
IDE
PAN
EL 4
4161
x1
RH
BAC
K PA
NEL
441
59 x
1
REAR TOP PANEL 44156 x1FRONT TOP PANEL 44157 x1
LH B
ACK
PAN
EL 4
4158
x1
REAR BASE
PANEL 44166 x1
FRONT BASE
PANEL 44378 x1
FASCIA PANEL 44167 x1
RH
FR
ON
T SI
DE
PNAL
E 44
163
x1
RH
FR
ON
T PA
NEL
443
76 x
1
DO
OR
ASS
EMBL
Y 44
374
x1
LH F
RO
NT
PAN
EL 4
4164
x1
LH F
RO
NT
SID
E PA
NEL
441
62 x
1
Warning: Please keepthis key card safe! Referto if replacement key is required.
00001
YOUR UNIQUEKEY CODE
3
5 6
4
21
x13 x3
x22 x19
x22 x16
PLEASE NOTE ALL SCREWS ARE FIXED FROM THE INSIDE
x7
x15
x4
x4
x4
x4
REAR BASE
PANEL 44166
FRONT BASE
PANEL 44378
RH
BAC
K PA
NEL
441
59
RH
REA
R S
IDE
PAN
EL 4
4161
LH B
ACK
PAN
EL 4
4158
LH R
EAR
SID
E PA
NEL
441
60
REA
R T
OP
PAN
EL 4
4156
x13
x3
x7
X15
x16
x3
7 8
9 10
11 12
x24 x18
x24 x18
x8 x30
x4
x4x4
x4
x9
x15
x3
x15
x4
x4x7
x7
RH
FR
ON
T SI
DE
PNAL
E 44
163
RH
FR
ON
T PA
NEL
443
76
LH F
RO
NT
SID
E PA
NEL
441
62
LH F
RO
NT
PAN
EL 4
4164
FASCIA PANEL 44167
FRONT TOP PANEL 44157
x9
x15
x3
x15
SEAL
ANT
DO
OR
ASS
EMBL
Y 44
374
www.asgardsss.co.uk
044377/13.01.16/KW/REV1
SEAL ALL INTERNAL CORNERS
25 26
27!
x9 x8
