Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1...

26
RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

Transcript of Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1...

Page 1: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013

Ascom IPBL1 software version 6.1.2

Page 2: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 2 29 juli 2013

RELEASE NOTES

Ascom IPBL1 version 6.1.2

GENERAL

Build date: 2013-06-25 Software name: IPBL_firm_v6p1p2.bin Software version: 6.1.2 Bootcode version: 6.1.2

Purpose of the release

This is a release for the Ascom IP-DECT access point that adds new functions and solves a number of non-conformities.

Page 3: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 3 29 juli 2013

MAJOR NEW FUNCTIONALITY

Support for Audiocode’s gateway towards MS LYNC IP-DECT can now be used in Microsoft Lync systems in combination with a gateway from Audiocodes.

Backup with IIS and TFTP When using IIS as an update server it is possible for IP-DECT devices to write files to IIS, i.e. upload configuration. Support of http digest authentication algorithm "md5-sess" is included, which is needed to work with newer IIS versions.

Easy registration of anonymous devices Possible to manually add IPEI's to the Anonymous list and automatically register handsets, new/factory reset.

Support for local Russian phone book The local phone book supports searching for other users based on UTF-8.

3-party conference with Innovaphone PBX Support for ad hoc conference using Innovaphone PBX conferencing unit.

LAN redundancy LAN redundancy for IPBL using the Rapid Spanning Tree protocol (RSTP)

.

Page 4: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 4 29 juli 2013

CHANGES

Description of changes relative to version: 5.1.18

1.1 IMPROVEMENTS

1.1.1 Change requests

CR 16672, 19140 Automatic update of clock in portables

When time changes like daylight savings or time zone changes, the time in the handsets will be updated within 3 minutes.

CR 21377 Support for presence systems

It it now possible to connect IP-DECT to a presence system like Vision 80/20 via ICP protocol. See installation and operation manual for details.

CR 21493 Include redundant solution with Cisco SRST solution on IVT certification

This is now included.

CR 21622 Ports used for internal call signaling

It was difficult to place a firewall between a radio and the master since the communication between them used dynamic ports. This is now solved by using static port numbers for internal communication, see Installation and operations manual for more details.

CR 22146 Registration with Innovaphone master/slave PBXs

In a multi Innovaphone PBX setup it was not possible to use the "physical location" feature to get access to local objects in the PBX. This is now solved.

1.1.2 Other improvements

Support AES in Kerberos (AD)

The IP-DECT Kerberos service now supports the AES encryption type to work well in a trust relationship with a Windows Server 2008 R2 Active Directory.

Create an SNMP critical active alarm if Update/Backup service failed

All failures of the backup/update service now generate a critical alarm.

Time zone drop down list in radio Config (web GUI)

It is no longer necessary to manually configure the Format string in radio config,

Services added as a new left menu

The General menu contained many tabs. Now a new configuration menu called services has been added. Use ctrl+F5 or restart browser to make new menu appear.

Page 5: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 5 29 juli 2013

1.2 CORRECTIONS

1.2.1 Corrected non conformity reports (NCR)

NCR 20959 Session timer negotiation failure at genband interop

Description

Interoperability issue with Genband C20, where call could be dropped after one session timer interval.

Release information/solution

Genband session timer issue fixed. .

Impact

NCR 22056 Portable auto answer

Description

It is possible for the PBX to include an "auto-answer" in the INVITE to make the portable automatically go off hook but it only worked for Innovaphone PBXs.

Release information/solution

Fixed so that auto answer feature is accepted regardless of PBX brand.

Impact

NCR 22266 RFP description not visible in service report

Description

Sometimes the RFP description was not included in the service report.

Release information/solution

Fixed so that RFP descriptions >46 chars appears in service report

Impact

NCR 22428 Transfer drops in SWYX systems

Description

The timer started after receiving 100 Trying in an outgoing Invite transaction is only 5 seconds. This causes unattended transfers to be dropped in some cases where it takes more than 5 seconds to get a response.

Release information/solution

Problem in SWYX systems when a dect handset is unattended transferred to a destination where it takes a long time to receive a ringing or progress response has been solved

NCR 22495 Unable to access device after changing DHCP setting

Description

In a system without DHCP server the connection with the device was lost when changing DHCP setting from automatic to disabled, i.e. when switching from 192.168.0.1 to a defined fixed address..

Release information/solution

When device is in DHCP automatic mode and DHCP setting is changed to disabled the change takes effect after a reset (reset required is displayed in GUI).

Impact

Page 6: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 6 29 juli 2013

NCR 21175 Multicast stopped working on some units after rebooting the IPDECT system

Description

Handset stopped receiving Multicast message after reboot.

Release information/solution

This is now solved.

Impact

NCR 21464 Watchdog reset

Description

Master restart.

Release information/solution

This is now fixed.

Impact

NCR 20401 Send pause with inband DTMF

Description

This did not work in IPBS after 4.1.24.

Release information/solution

This is now solved.

Impact

NCR 20167 Faulty DNS behaviour

Description

Faulty behavior when using dynamic load balancing.

Release information/solution

This is now solved and when using dynamic load balancing the correct (highest priority) SIP proxy is now selected.

Impact

1.2.2 Other corrections

CUCM:PP got "PBX out of service" using SIPS/SRTP (Remote server certificate mismatch)

The Remote server Certificate Name is now properly used when verifying certificate.

Manual and scheduled reference resynchronization

If an air sync master is configured with a reference and the sync is lost it is possible to either do a manual resynchronization or to have it done automatically at a specified time. In some cases this did not work. This is now fixed so the air sync master re-synchronization is triggered correctly.

XML parsing error is shown if delete contacts from LDAP>Expert page

XML parsing error or "Not Found" was shown if many phonebook contacts were deleted on the LDAP>Expert page. This is now corrected and it is possible to delete all displayed phonebook entries at once on the LDAP-Expert page.

Page 7: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 7 29 juli 2013

Page 8: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 8 29 juli 2013

LIMITATIONS – KNOWN ISSUES

LIMITATIONS

Enhanced DECT security

With the enhanced DECT security function enabled a scratching sound can happen in rare occasions. Due to this the feature shall not be implemented at customer sites without first having contacted the Product Manager for approval.

Limitation for shared phone

There can be a maximum of 500 shared phones on a master. If the number of radios connected to the PARI master exceed 200 it shall not have and shared phones, they must be placed on a different master

Page 9: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 9 29 juli 2013

COMPATIBILITY INFO

IPBL1 with software version 6.1..2 is fully compatible with other IP-DECT products (IPBS1, IPBS2) running version 6.1.2. However the binary files loaded to the different products are different.

Compatible with following versions of IPBL1

IPBL1-AA

IPBL1-AB

Page 10: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 10 29 juli 2013

OLDER CHANGES

Description of changes between 5.1.18 and 5.1.16

1.3 IMPROVEMENTS

1.3.1 Other improvements

1.4 CORRECTIONS

1.4.1 Corrected non conformity reports (NCR)

NCR 21464

Description

Master restarts.

Release information/solution

This bug is now fixed.

Impact

NCR 22277

Description

Master restarts.

Release information/solution

Fixed problem with very long A-name (>128 chars) received from PBX.

Impact

NCR 22316

Description

Master restarts.

Release information/solution

Solved a timing issue in the SIP protocol stack when clearing a call that could lead to a Dect Master watchdog restart.

Impact

NCR 22329

Description

Master restarts.

Release information/solution

Problem with data traffic to handsets during high load at startup could cause a master restart.

Impact

Page 11: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 11 29 juli 2013

Page 12: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 12 29 juli 2013

OLDER CHANGES

Description of changes between 5.1.16 and 5.1.15

IMPROVEMENTS

Other improvements

Login/logout AD replication

CORRECTIONS

Standby master failed to connect When the standby master was active it sometimes failed to connect to the mobility master.This is now fixed.

Corrected non conformity reports (NCR)

NCR 20638

Description

Calls with no way speech.

Release information/solution

A bug in a situation where a media negotiation occurred after handover and before answering an incoming call is now fixed.

Impact

NCR 21185

Description

Sometimes there were missing users in exported file.

Release information/solution

Has now been fixed.

Impact

NCR 21161

Description

Decreasing OIDs prevent SNMP manager to walk the MIB.

Release information/solution

Has now been fixed.

Impact

Page 13: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 13 29 juli 2013

OLDER CHANGES

Description of changes between version 5.1.8 and 5.1.15

IMPROVEMENTS

Other improvements

Login/logout AD replication

Login/logout error of portable when AD replication is active has been solved.

Performance graph

An issue with that the CPU-R performance graph did not display correct information has been fixed.

Brief sound from other call at on hold

A problem for MX-One systems where extension on hold could hear brief sound from the other call has been fixed.

CORRECTIONS

Corrected non conformity reports (NCR)

NCR 20757

Description

When the customer is using twinning the MWI message did not always turn off when checked from the deskphone

Release information/solution

A bug in the parsing of SIP message summary has been fixed and the MWI now turn of.

Impact

This relevant for the Shoretel PBX

NCR 20767

Description

When an IP-DECT handset is transferred to a destination that after ringing has started rejects the call, the IP-DECT handset is disconnected. The SIP call to the transferor is still there.

Release information/solution

A problem with blind transfer where a DECT has been solved.

Impact

This relevant for the SWYX PBX.

NCR 20960

Description

Shoretel transfer to international (E.164) number prefixed with access code fails.

Release information/solution

A problem when making external calls which required an access code has been solved.

Page 14: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 14 29 juli 2013

Impact

This relevant for the Shoretel PBX.

NCR 21003 & 21136

Description

Call Forward No Reply (CFNR) cause hanging call instances.

Release information/solution

A problem when handling call forwarding at no reply could lead to that the calling party could become busy indefinitely has been solved.

Impact

The problem is PBX independent.

NCR 21051

Description

Browsing to the Kerberos GUI page caused a restart of the IPBL.

Release information/solution

A problem when making external calls which required an access code has been solved.

Impact

The problem is PBX independent.

NCR 20806

Description

No handset display update after pressing the R-key.

Release information/solution

The problem has been fixed and if the R-key is pressed during a call it is now displayed in the portable.

Impact

The problem is PBX independent.

NCR 20512 & 21430

Description

The IP-DECT master restarts because of low memory.

Release information/solution

The memory leakage was caused by certain SIP NOTIFY messages. This problem has now been solved.

Impact

The problem is only relevant for the Avaya/Nortel (CS1K) PBX.

Page 15: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 15 29 juli 2013

NCR 20799

Description

The user is unable to make/receive calls because of a hanging calls.

Release information/solution

The problem where call replacement could result in hanging calls has now been solved.

Impact

The problem is PBX independent.

NCR 21047

Description

Attended and unattended call transfer fails.

Release information/solution

Fixed transfer issues.

Impact

Avaya IP Office only.

NCR 21299

Description

Not possible to register a redundant CUCM with SIPS.

Release information/solution

Possibility to disable certificate subject check for SIP/TLS connections.

Impact

For CUCM only.

NCR 21355

Description

SIP registration problem with CUCM.

Release information/solution

Solved problem where turning off or logging out a handset could lead to continued PBX registration.

Impact

For CUCM only.

NCR 21400

Description

Memory runs out and IP-DECT HW restarts.

Release information/solution

Memory leak fixed.

Impact

PBX independent

Page 16: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 16 29 juli 2013

NCR 21410

Description

The IP-DECT Master restarts.

Release information/solution

An issue with call transfer that caused the master to restart has now been solved.

Impact

The problem is PBX independent.

NCR 21421

Description

The DECT radio restarts.

Release information/solution

An issue with call transfer that caused the radio to restart has now been solved.

Impact

The problem is PBX independent.

NCR 21566

Description

Long dialling tone before alerting tone.

Release information/solution

The problem is now solved.

Impact

Alcatel OXE and Mitel 3300.

NCR 21573

Description

Watchdog restart .

Release information/solution

Fixed master restart.

Impact

PBX independent.

NCR 21587

Description

Unexpected watchdog restart .

Release information/solution

Fixed radio restart.

Impact

PBX independent.

Page 17: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 17 29 juli 2013

NCR 21655

Description

Simultaneous watchdog restart on multiple IP- DECT slaves .

Release information/solution

Fixed radio restart.

Impact

PBX independent.

Page 18: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 18 29 juli 2013

OLDER CHANGES

Description of changes introduced in version 5.1.8 relative to version: 5.1.2

IMPROVEMENTS

Change Requests

CR 20851 Contact header uses both private and public IP address

SIP interoperability problem with Acme Packet SBC solved towards the Arcstel/Advoco NetPBX IP centrex solution.

Other improvements

Upgrading issues

Upgrading IPBS2 master in a multi-master system to 5.1.X caused users to be deleted. The collateral damages caused by change of mac-alias for IPBS2 when upgrading to 5.1.2 (see technical news 74:12) has been solved.

CORRECTIONS

Corrected non conformity reports (NCR)

NCR 20841

Description

It is only possible registering one handset with 13-digits in the extension number

Release information/solution

Problem using more than 12 digit extension numbers in licensed CUCM systems has been solved.

Impact

This affects the Cisco Unified Communications Manager with license Extended SIP Line Support.

NCR 20657

Description

Watchdog Reset every 15-20 sec

Release information/solution

Possible restart when using fixed IP address and Service discovery is enabled has been solved

Impact

Affects all systems where fixed IP address and UNITE service discovery is used.

Page 19: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 19 29 juli 2013

NCR 20639

Description

Not possible to view Air Sync Overview if IPBS's have æøå in names

Release information/solution

Device description in sync overview contained additional garbage characters which in some cases can cause XML error on sync overview page.

Impact

The problem is PBX independent.

NCR 20850

Description

Not possible to put an IP-DECT handset on hold

Release information/solution

SIP interoperability problem with Genband SBC solved

Impact

This issue is valid for GENBAND S3 SBC and C20/A2 call server, former Nortel CS2k (IP Centrex).

NCR 20631

Description

Transfer a call before answer not possible

Release information/solution

SIP interoperability problem with Alcatel/Lucent OXE solved.

Impact

This issue is valid for Alcatel/Lucent OXE.

NCR 21037 and 21040

Description

Not possible to login/logout users

Release information/solution

Problem with login/logout users when not using local R-key handling is now solved.

Impact

The problem is PBX independent.

NCR 20969

Description

One way speech in IPBL systems.

Release information/solution

A specific connection scenario caused one-way speech. This issue is now solved.

Impact

The problem is PBX independent.

Page 20: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 20 29 juli 2013

NCR 20629

Description

Error message when using IP-DECT MIB

Release information/solution

Removed illegal underscore characters from enum values in the SNMP MIB definition.

Impact

The problem is PBX independent.

Page 21: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 21 29 juli 2013

OLDER CHANGES Description of changes introduced in version 5.1.2 relative to version: 5.0.11

MAJOR NEW FUNCTIONALITY

Support for enhanced functionality with Cisco Unified Communications Manager systems

IP-DECT now supports enhanced functionality in Cisco UCM systems version 7.1.5 and later. The new features are:

Music on hold

Ad Hoc Conferencing

Meet-Me Conferencing

Call Back

Call Pickup

Call Park

Abbreviated Dialling

This is a licensed functionality and a license key need to be installed on the IP-DECT devices. This functionality is limited to be used in Europe only according to the Cisco agreement. The license is based on the IP-DECT device serial number and each IP-DECT device in the system will need a license.

The applicable licenses are:

IPBS1-L01 for the IPBS1

IPBS2-L01 for the IPBS2

IPBL1-L01 for the IPBL

License handling and software update via the Device Manager

The IP-DECT system now supports license handling and software download to IP-DECT devices via the Device Manager in the same way as it is done for the DECT handsets.

Missed call info when in call

IP-DECT now supports that the number and name are transfer to the call list when the user gets a call when already being in a call.

Remote handset hook control from the Innovaphone PBX

The IP-DECT system now supports remote call control (handset hook on /off) from the Innovaphone PBX.

Messaging in Russian

IP-DECT now supports messaging in Russian via Unite

Waveforms

The IP-DECT Access Point supports transfer of waveforms to the DECT handsets.

IMPROVEMENTS

Change Requests

CR 19448 increase number of digits for passwords in IP-DECT

Maximum user password length is now 23 characters instead of 15 in order to support the Telia Centrex solution that have a security policy that stipulates that a login password of at least 16 digits is required.

Other improvements

Easy registration

Easy registration is now allowed also when "With System AC" mode is enabled

Call hold problems with the CUCM

Page 22: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 22 29 juli 2013

A problem with inter-cluster hold/retrieve in CUCM for SRTP calls has been solved.

Memory leakage

IPv6 multicast packets to UDP/TCP ports that is not used caused memory leaks. This has now been corrected.

IPBS2 now has a new netbios name

To find a IPBS2 device with netbios name use IPBS2-XX-XX-XX instead if IPBS-XX-XX-XX. The default name for update server script is also changed i.e. update-IPBS2.htm instead of update-IPBS.htm.

If upgrading IPBS2 devices from 5.0.X they will get new RFPIs because of the name change. (It is possible to manually modify the config to avoid this)

Additional Subject Alternative Names (SAN) can be added to the device certificate

CORRECTIONS

Corrected non conformity reports (NCR)

NCR 19804 Problem to view GUI page RFP overview

Description

Not possible to view GUI page RFP overview ( browser shows XML error)..

Release information/solution

GUI problem when using special characters, e.g. åäö, in RFP descriptions has been corrected.

Impact

The problem is PBX independent.

Page 23: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 23 29 juli 2013

NCR 20368 Airsync overview not visible in the GUI

Description

GUI page Airsync overview is blank.

Release information/solution

The GUI problem when a device name contained a single quote character has been corrected

Impact

The problem is PBX independent.

NCR 20302 Incoming calls are displayed as redirected

Description

For incoming call the handset displays redirected call from the caller.

Release information/solution

The problem with redirection indication in display although no redirection has occurred is now solved.

Impact

The problem is relevant for Avaya Session Manager.

NCR 20108 Absense/diversion problem with Ascom IP-DECT

Description

Absence/diversion information not always updated in the DECT handset.

Release information/solution

The problem with external idle display control using Call-Info is now solved.

Impact

The problem is relevant for Aastra MX-One.

NCR 20391 Master RFP reboots

Description

Pari Master Restarts.

Release information/solution

The restart was caused by memory leakage when using IP-DECT central phonebook. This problem is now solved.

Impact

The problem is PBX independent.

NCR 20403 SIP interoperability problems with the Swyx PBX

Description

Swyx features not working.

Release information/solution

SIP interoperability problem, where a REFER with replaces information incorrectly resulted in an INVITE with two identical Replaces headers is now solved.

Impact

The problem is relevant for the Swyx PBX.

Page 24: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 24 29 juli 2013

NCR 20506 XML error on the Kerberos web page

Description

Configuring Kerberos settings generated a XML error in IP-DECT GUI.

Release information/solution

XML error when realm and user is created at the same time is now solved.

Impact

The problem is PBX independent.

NCR 19748 Problems when using special characters

Description

When using åäö in search (Configuration-Users-Users) the result is a XML-error in browser.

Release information/solution

User administration page now support search for names with special characters, e.g. åäö.

Impact

The problem is PBX independent.

NCR 19658 MWI not working

Description

MWI not working for some systems.

Release information/solution

Improved handling of SIP record route to solve MWI problem.

Impact

The problem is relevant for Avaya Session Manager.

NCR 20006 and 20430 Deregistration of handsets

Description

When trying to log in a shared phone the user is deleted and no longer visible in the user GUI of IP-DECT.

Release information/solution

Problem fixed with users being deleted when logging in a shared phone.

Impact

The problem is PBX independent.

NCR 20281 PP fail to register on second Master for large system

Description

When backup master is activated portables show “PBX out of service”. Power cycle of portable resolves the issue.

Release information/solution

PBX communication will not fail when switching to backup master.

Impact

The problem is only relevant for installation with the Mitel PBX 3300.

Page 25: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 25 29 juli 2013

NCR 20193 and 20221 AD replication doesn’t work

Description

Using AD replication with 5.0.14 caused IPEIs for all users to be deleted.

Release information/solution

AD replication did not work in 5.0.14 and caused IPEIs to be deleted.

Impact

The problem is PBX independent.

NCR 19855 MWI incorrectly cleared

Description

MWI incorrectly cleared when portable is switched on or logged in shared phone.

Release information/solution

The problem with activating MWI at startup/login of handset has been corrected.

Impact

The problem is relevant for the Cisco UCM.

NCR 18266 MWI problem towards the CS1K

Description

MWI incorrectly removed from portable.

Release information/solution

Interoperability problem with Nortel CS1000 regarding MWI.

Impact

Problem is relevant for the CS1K PBX.

Solution

This problem is now solved

NCR 19549, 19496, 19653 Incoming external calls fails

Description

Different SIP signalling compared with previous releases of IP-DECT

Release information/solution

Instead of using 100 Session Progress 183 Session Progress was sent from the IP-DECT system. The interworking of SIP 183 Session Progress and Q.931 Call Proceeding has been removed.

Impact

Caused problems with several PBX’s where Ascom have good interoperability.

Solution

This problem is now solved

Page 26: Ascom IPBL1 software version 6.1 notes IPBL1 060102... · 2013-08-13 · RELEASE NOTES IPBL1 Software version 6.1.2 1 29 juli 2013 Ascom IPBL1 software version 6.1.2

RELEASE NOTES IPBL1 Software version 6.1.2 26 29 juli 2013

NCR 19727 Transfer to PSTN doesn't work.

Description

Transfer to PSTN failes.

Release information/solution

SIP message grew too large after digest challenge causing this problem.

Impact

Transfer fails when using Avaya Session Manager (SIP).

Solution

This problem is now solved

NCR 19740 Pari master reboots

Description

Pari master keeps rebooting and coming back on line, users keep reporting master out of service, then it's ok and then crashes again.

Release information/solution

Problem with decoding large History-Info headers causing the master to restart

Impact

Master restarts when using Avaya Session Manager (SIP).

Solution

This problem is now solved