As0004 E Leaflet (Multi)Cyclones
2
AS0004E Cyclones and Multi-cyclones Over the years cyclones have been considered mainly as pre-separators. However, nowadays it is possible to obtain high separation efficiencies with cyclones as well. Thus the field of operation for cyclones has become much wider than previously. And, with multi-cyclones it is even possible to obtain a much higher separation efficiency at equal differential pressure. The working principle of cyclones is based on the centrifugal forces by which a gas -product mixture is separated based on difference in material density. Multi-cyclones are parallel placed cyclones in which the air flow is equally distributed across all cyclones. Airtechnic multi-cyclones and single cyclones are available as pre-separator and as final separator: o for a high dust- or material content, also for light materials o as a pre-separator for bulk material o to separate liquids, greasy substances, (oil) vapour and moist dust o at high temperatures Based on the end-user requirements regarding emission, energy consumption, safety, life time, etc., extensive calculations are carried out in order to determine the optimal design of a cyclone. If necessary tests are performed to verify the cyclone design. Airtechnic Solutions BV - Stationsstraat 142 - NL 5963 AC Hegelsom Tel. +31 (0) 77 327 50 19 - Fax + 31 (0) 77 327 50 01 - [email protected] - www.airtechnicsolutions.com 0 20 40 60 80 100 50 micron 6 micron 5 micron 4 micron 3 micron 2 micron 1,5 micron 1 micron Separation (%) Particle size Separation Efficiency (Multi)-Cyclones
-
Upload
winfried-goes -
Category
Documents
-
view
169 -
download
0
Transcript of As0004 E Leaflet (Multi)Cyclones
AS0004E
Cyclones and Multi-cyclones
Over the years cyclones have been considered
mainly as pre-separators. However,
nowadays it is possible to obtain high
separation efficiencies with cyclones as well.
Thus the field of operation for cyclones has
become much wider than previously.
And, with multi-cyclones it is even possible to
obtain a much higher separation efficiency at
equal differential pressure.
The working principle of cyclones is based on
the centrifugal forces by which a gas -product
mixture is separated based on difference in
material density.
Multi-cyclones are parallel placed cyclones in
which the air flow is equally distributed across
all cyclones.
Airtechnic multi-cyclones and single cyclones are available as pre-separator and as
final separator:
o for a high dust- or material content, also for light materials
o as a pre-separator for bulk material
o to separate liquids, greasy substances, (oil) vapour and moist dust
o at high temperatures
Based on the end-user requirements
regarding emission, energy consumption,
safety, life time, etc., extensive calculations
are carried out in order to determine the
optimal design of a cyclone. If necessary
tests are performed to verify the cyclone
design.
Airtechnic Solutions BV - Stationsstraat 142 - NL 5963 AC Hegelsom
Tel. +31 (0) 77 327 50 19 - Fax + 31 (0) 77 327 50 01 - [email protected] - www.airtechnicsolutions.com
0
20
40
60
80
100
50 micron 6 micron 5 micron 4 micron 3 micron 2 micron 1,5 micron 1 micron
Se
para
tio
n (%
)
Particle size
Separation Efficiency (Multi)-Cyclones
AS0004E
Airtechnic cyclones and multi-cyclones
are characterized by:
o high separation efficiency
o guaranteed emission
o high level of process control by
PLC-based automation
o low energy consumption
o reliability
o user friendliness
o flexibility
o safety
o long life time
o low maintenance costs
o low operating costs
Cyclones and Multi-cyclones
Technical data:
Capacity 1 - 2.000.000 Am3/h
Pressure difference ∆p 1 - 50 mbar
Specific density from 0,15 kg /m3
Temperature 0 - 300 °C
Material galavanised, corten
steel, hardox, stainless
steel, heat-proof steel,
glass
Material thickness 1 - 10 mm
On request provided with fire– and / or
explosion protection.
Airtechnic Solutions BV - Stationsstraat 142 - NL 5963 AC Hegelsom
Tel. +31 (0) 77 327 50 19 - Fax + 31 (0) 77 327 50 01 - [email protected] - www.airtechnicsolutions.com
Airtechnic Solutions BV is the specialist in providing integral solutions for airtechnical problems
regarding sieving and separating of solids, dust and flue gas emission, process control and
improvement, product and gastransport and air quality conditioning.
