AS-32HD1 81cm (32 inch) LCD HD TV VIVID Instruction Manual

N13275

Instruction ManualModel Number: AS-32HD1

After Sales Support TEL: 1300 886 649

81cm (32") LCD HD TV


1

Contents

What your 1 year warranty means 2

Welcome 3

Important safety instructions 4

Introduction: functions and features 6

Contents of the box 6

Installation 7

Positioning the TV set 7

Antenna and power connections 7

Attaching the base 8

Inserting batteries into the remote control 9

External schematic and installation 10

Front panel 10

Back panel 11

Remote control 12

EPG (Electronic Program Guide) 15

Recording 16

Menu screens 17

Basic operation 17

Picture settings 17

Sound settings 19

Channel settings 20

Set-up settings 21

Advanced settings 22

Introduction: the UPlayer (USB) 23

Connections 24

UPlayer control 24

Media file playback support 24

Video menu 25

Music menu 26

Photo menu 27

Text menu 28

FAQs 29

Specifications 31


2

What your 1 year warranty means

Great care has gone into the manufacture of this product and it should therefore provide you

with years of good service when used properly. However, should it fail within the first year

after purchase, even though it has been used as intended, contact us immediately and we

will remedy the problem as soon as possible. In the unlikely event of such an occurrence, or if

you require any information about the product, please contact us via our after sales support

services, details of which can be found in this manual and on the product itself.

81cm (32") LCD HD TV


3

Congratulations on choosing to buy a VIVID® product.

All products brought to you by VIVID® are manufactured to the highest standards of

performance and safety and, as part of our philosophy of customer service and satisfaction,

this item is backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your

purchase for many years to come.

Welcome


4

Important safety instructionsRead this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to.

Usage conditions and restrictions• Follow the instructions in this manual when installing and adjusting the TV set. Only adjust

those controls that are covered in this instruction manual, as improper adjustment of other controls may result in damage. If this happens, unplug the TV set and have it serviced by appropriately qualified personnel.

• Do not cover the ventilation openings with items such as newspapers, tablecloths, curtains etc., as this could impede ventilation.

• Do not push any objects of any kind into this unit through the cabinet slots, as they could touch the current-carrying parts or short-circuit parts, resulting in fire, electric shock or damage to the unit.

• Do not touch the screen surface with fingers, as this may scratch or mar the LCD screen.

• Do not impact the LCD screen with hard pressure, as this may damage the LCD screen severely.

• Do not expose the battery (or batteries or battery pack) to excessive heat such as sunshine, fire or the like.

• Unplug the TV set if you will not be using it for a long period of time.

• Unplug the TV set if it has been subject to impact or has been dropped and is damaged.

• Unplug the TV set if its power cord or plug, or the wall socket, are damaged.

• The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

• Young children should be supervised to ensure they do not play with the appliance.

Electrical safety, power cord and plug• Before installing this TV set, make sure your outlet voltage corresponds to the voltage

stated on the appliance rating label.

• To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

• Do not overload the power cord or power outlet.

• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.

• Do not allow anything to rest on or roll over the power cord and signal cable.

• Protect the power cord and signal cable from being trampled.

• Do not expose the power cord and signal cable to moisture.


5

Position• If a television is not positioned in a sufficiently stable location, it can be potentially

hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:• Securely attaching the TV to the wall mount fastened on the wall.• Only using furniture that can safely support the television.• Ensuring the television is not overhanging the edge of the supporting furniture.• Educating children about the dangers of climbing on furniture to reach the TV controls.• Not standing the TV on cloth or other materials placed between the television and

supporting furniture.• Not placing the television on tall furniture (for example, cupboards or bookcases)

without anchoring both the furniture and the television to a suitable support.

• When deciding on where to put the TV set, make sure the place is:• Well ventilated.• Away from damp and cold.• Protected from overheating and away from direct sunlight.• Away from moisture drips or splashes.• Protected from excessive dust.

• Do not install this equipment in a confined space such as a bookcase or similar unit.

• Do not put any objects filled with liquids, such as vases, on top of the TV set.

• Do not place any naked flame sources, such as lighted candles, on top of the TV set.

Cleaning and maintenance• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.

• Do not apply excessive force to the screen when cleaning.

• Do not clean the screen with water or chemical cleaners as this may damage the LCD screen surface.

• Do not dismantle this product by yourself, as this may cause damage. There are no user- serviceable parts contained in the TV set.

• If your TV set has been damaged, contact the after sales support line for advice or take it to a local service centre or for inspection or repair. No liability can be accepted for any damage caused by non-compliance with these instructions or any other improper use or mishandling of appliance.


6

Introduction: functions and features

Contents of the box

Basic functions* Analog and digital TV reception* Auto and manual tuning* AV and YPbPr inputs* PVR recording function via USB* PC, HDMI and UPlayer (USB) function* Full-function infrared remote control* Sleep timer and program recall shortcut

PC monitor function* Auto resizing and centring * Supports PC sound source input* Supports 640x480, 800x600, 1024x768, 1280x1024 PC formats, refresh rate 60Hz

Features* Embedded digital colour gain control circuit, providing better brightness and true to

life colour* Embedded 3D comb filter * Black/white level stretch circuit* High class LCD screen features: high brightness, high contrast, wide viewing angle, fast

response time* Component input supports high definition signal formats 720p* Supports HDMI input 1080p, 1.3A compliant* VGA interface enables use as a high-performance PC monitor* Multimedia capable, supporting computer sound source* Low power consumption in stand-by mode saves energy* Latest high integrated digital processor chip

* 1x 81cm (32") High Definition LCD TV Set* 2x AAA Batteries* 1x Remote Control* 1x Base for the TV* 1x Base Installation Kit including: 1x bracket 4x long screws (BA4x20) 4x shorter screws (WM4x10)* 1x Instruction Manual* 2x Warranty Stickers* 1x Warranty Card


7

Installation

Positioning the TV set• Place the TV screen on a solid horizontal surface, observing all safety instructions about

positioning the TV on page 5 (see page 8 for how to attach the base).

• Leave a space of at least 10cm free all around the set for ventilation.

• To prevent any fault and unsafe situations, do not place any objects on top of the set.

• This TV set can be used in tropical and/or moderate climates.

Antenna and power connections

1. Connect the antenna cable (not supplied) into the antenna input terminal at the rear panel of the TV set and plug the cable into the antenna socket in the wall.

2. Connect the power plug into the wall outlet. (The type of power plug provided may be different from the above picture for some countries.)

NOTE: • A 75Ω coaxial antenna cable is normally used for current outdoor antennae or cable TV.

For better reception we suggest using this type of antenna cable.

• Flat cables or indoor antennae are old technology and may not provide good enough reception.


8

Attaching the baseWhen attaching the base to the TV monitor, make sure you have all the parts and accessories required — see page 6 for a list of the complete box contents. You will also need a Phillips screwdriver. Then follow the instructions below.

1. As pictured in Diagram 1, fasten the bracket (2) to the base (1) with the four long screws (BA4x20) (3) and tighten the screws.

2. Put a large soft cloth on top of a flat surface (such as a table) to prevent damaging the LCD screen. Then place the TV monitor flat on top of the cloth with the screen side facing down, as pictured below in Diagram 2.

3. Now insert the base into the opening at the bottom of the TV, as pictured above in Diagram 2. Make sure you insert the base in the correct direction, as you will not be able to screw it in place if it is inserted the wrong way.

4. The four round holes in the connection bracket of the base (4) should align with the four holes at the back of the TV housing. When the holes are perfectly aligned, connect the base to the TV set with the four shorter screws (WM4X10) and tighten them, as pictured in Diagram 3.


9

Inserting batteries into the remote control• Remove the battery cover located on the back of the remote control by gently pushing

down the cover lock and pulling the cover upwards.

• Insert two AAA Alkaline or equivalent batteries, following the +/- marking in the battery compartment.

• Replace the battery cover.

Precautions when using batteries• Do not use old and new batteries together.

• Do not use different types of battery (for example, Manganese and Alkaline batteries)together.

• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge non-chargeable batteries.

• Remove the batteries from the remote control unit if you do not intend to use the unit for a long time.

NOTE: • Do not drop the remote control unit.

• Do not subject the remote control unit to physical shocks.

• Keep the remote control unit dry. Wetting it may cause the unit to malfunction.

• Replace the batteries with new ones when operation of the unit deteriorates.


10

External schematic and installation

Front panelNOTE: the graphics are for representation only.

1 Power button2 Power indicator / remote sensor3 Speakers4 Program up/down buttons5 Volume up/down button6 Menu button7 Source button8 Stand-by button


11

Back panelNOTE: the graphics are for representation only.

1 UPlayer: UPlayer (USB) port. 2 HDMI1\HDMI2\HDMI3: Connect HDMI input signal from signal source such as DVD. 3 AV1\AV2 IN: Connect audio and video input signals from signal source such as DVD. 4 EARPHONE: Audio output, speakers will be muted with earphones plugged in. 5 S/PDIF: Connect digital audio output signal. 6 VGA IN: Connect a PC via a VGA cable. 7 VGA AUDIO IN: Audio input for PC and for HDMI when the signal is DVI timing. 8 YPbPr (Component input): Connect YPbPr signal from signal source such as DVD.

Shares the same audio input as AV2. 9 AV OUT: Connect audio and video output signal.10 ANTENNA IN: Connect a coaxial cable to receive signal from the antenna or cable.


12

Remote control

1. Standby Button ( ) Press to turn the TV on (to stand-by mode).

2. Picture Mode (P.P) Press to select the desired picture mode.

3. Sound Mode (S.M) Press to select the desired sound mode.

4. Zoom Button Press to select the desired picture aspect ratio.

5. Sleep Button Press to set the length of time to switch the TV to stand-by mode (Off 10min 20min 30min 60min 90min 120min 180min 240min).

6. Number (Digits) Buttons Press to select the TV channel directly.

7. Return Button Press to return to the previously viewed channel.

8. Information Button (INFO) Press to display relevant information such as screen format, source, etc.

9. Mute( ) Button Press to mute or restore the volume.

10. Program Up/Down Buttons (P / ) Press to select the previous/next channel.

11. Volume Up/Down Buttons (V+ / V-) Press to adjust the volume.

12. NICAM Button Press to select a different sound mode when the source is different (not applicable for Australia).

13. Menu Button Press to enter or exit from the TV menu.

14. Source Button Press to select the input source mode.

15. OK Button Press to confirm and execute the selection.

16. Up/Down Buttons ( / ) Press to select or adjust the desired item on the TV menu.

17. Left/Right Buttons( / ) Press to navigate to the desired item on the TV menu.


13

18. DTV/VCR Button Press to activate or quit PVR function in DTV mode.

19. TV/Radio Button Press to switch from digital TV to digital radio broadcast.

20. UPlayer Button Press to enter the UPlayer (USB) menu.

21. Fast Reverse Button( ) Press to fast reverse in UPlayer mode.

22. Fast Forward Button ( ) Press to fast forward in UPlayer mode.

23. Play & Pause Button( ) Press to pause playback in UPlayer mode, press again to continue playback.

24. Previous Button ( ) Press to play the previous music or movie in UPlayer mode.

25. Next Button ( ) Press to play the next music or movie in UPlayer mode.

26. Stop Button ( ) Press to stop the music or movie in UPlayer mode.

27. Subtitle Button Press to select subtitles, if the TV program comes with subtitles.

28. CH List Buttons Press to display the available channel list in DTV mode.

29. EPG (Electronic Program Guide) Press to display the digital electronic program guide in DTV mode.

30. Fav Button Press to display your favourite channels.


14

31. Text Button (Optional) Press to enter the teletext menu.

32. Index Button (Optional) Press to enter the Teletext index menu.

33. Sub-Page Button (Optional) Press to enter sub-code mode, where you can select certain sub-code pages of a teletext page.

34. Mix Button (Optional) Press to close/open the teletext background.

35. Size Button (Optional) Press to select different image sizes for teletext: normal, double high top, double high bottom.

36. Cancel Button (Optional) In teletext mode, press this button to display the TV signal in the background. When not in teletext mode, press this button to exit from the OSD display.

37. Hold Button (Optional) Press to hold the teletext page on screen without update and changes. Press again to release the hold state. When not in teletext mode, press this button to freeze the picture display.

38. Reveal Button (Optional) Press this button to reveal the hidden information for some teletext pages. Press again to hide the information.

39. Colour Button (Optional) These four colour keys are for relatively fast teletext functions in the bottom of teletext page.


15

EPG (Electronic Program Guide)EPG stands for Digital Electronic Program Guide. It is supplied by the program providers and offers information about the programs to be broadcast. You can access it in digital mode by pressing the EPG button on the remote control.

1. Press the EPG button to bring up the EPG interface (right). The second bar from the top will display the current date and time. On the list below, the channel you are currently watching will be highlighted.

2. Before you can view any EPG information, you have to 'activate' every channel for which you want to view program information. To do this, use the /

buttons to select a channel, then press [ OK ] to confirm.

3. To check programs to be broadcast on a future date, scroll up with the button to the date field. Use the button to select the date and press [ OK ] to confirm.

4. Press the button to scroll up to the top bar in the display, then press the button to select Time. The top bar will now display Channel in the top right corner and the second bar will display one of your available channels.

5. Go to the channel and use the / buttons to select the channel for which you want to view information. After a brief moment, the program information will appear.

6. Use the / buttons to scroll through the time slots.

7. To exit out of the EPG menu, press the RETURN button.

RecorderPress the RED button to display the recorder menu (right).See page 16 for detailed information about the different ways of recording with the television onto a USB device.

InfoPress the GREEN button to show information about the selected program.

SchedulePress the YELLOW button to display the Reminder List. Press / to select a reminder, press the RED button to delete a reminder.

RemindPress the BLUE button to display a reminder menu.Press / to select an item and / to change the setting. Press OK to add the program to the reminder list. An updated reminder list will be shown.


16

RecordingYour television features a PVR recording function which lets you:

• Instantly record a television program (via the one-touch recording button on your remote control),

• Time-shift playback of a television program, and • Set a timer to record future television programs (via the Electronic Program Guide).

IMPORTANT NOTE: For any type of recording with this televsion, you must have plugged a USB device into the appropriate UPlayer/USB port at the back of the television to record on.

Instant one-touch recording and playbackIn DTV mode and with a USB device properly plugged in, press the DTV/VCR button on the remote control to activate the PVR function for instant recording of the channel you are watching. Press it again to stop recording. Once you are in PVR mode, use the arrow keys at the bottom of the screen when watching the recording.

Time-shift recordingUse the same one-touch recording method as described above for time-shifting a program you are currently watching. Time-shifting is the recording of television programs to a storage medium (your USB device) for viewing at a later, more convenient time. Use it to record a program when your viewing is interrupted or delayed.

Timer recordingThere are two ways to set the timer to record a television program.

If you know the programming details:1. In DTV mode and with a USB device properly plugged in, go to the channel that will

broadcast the program you want to record.2. Press the EPG button on your remote control to bring up the EPG interface. The channel

you are watching will be highlighted on the screen that appears.3. Press the RED button on the remote control, then enter the program details on the

recorder menu by pressing / to select an item and / to change the setting. For example, if the program starts at 8:30pm on the same day, enter: 30 in the space for MINUTES, 20 in the space for HOURS (a 24 hour clock applies), and then the relevant date. Use the same method for entering the finish time.

4. Choose the appropriate recording mode: once, every day or weekly.5. Press OK to confirm your selection. A schedule of all your recordings (the reminder list)

will appear. See page 15 for more on the schedule.6. Press the power ( ) button to switch the TV to stand-by. It will record your selection

automatically.

If you are browsing the EPG:1. In DTV mode and with a USB device properly plugged in, press the EPG button on

your remote control to bring up the EPG interface. Then follow steps 1–6 under EPG on page 15.

2. When you have found a program you want to set to record, press the RED button on the remote control. Then follow steps 3–6 described above.


17

Menu screensThis section explains the different menu screens, giving you all the information you need to get the most from your TV. Find out how to program channels, set your preferred on-screen display, picture and sound modes and parental control.

Basic operation1. Press [ MENU ] on the remote control (or on the TV front panel) to display the main menu.2. Press / and / to highlight the desired menu/item.3. Press / to change the setting.4. Press [ MENU ] to save the setting and go back to the last menu.

NOTE: • The buttons on the TV front panel have the same functions as the corresponding buttons

on the remote control. • Adjust the settings in TV mode. Unless otherwise indicated, the diagrams and descriptions

on the following pages are in TV mode.

Picture settingsPicture modeChoose your picture mode from Standard, Mild, Personal or Dynamic. "Brightness", "Contrast", "Colour", "Tint" and "Sharpness" can only be adjusted when the picture mode is set to "Personal". In the other modes, these values are preset.

BrightnessAdjusts the brightness of the picture, and usually is adjusted together with contrast.

ContrastAdjusts the difference between the light and dark areas of the picture.

ColourAdjusts the richness of colour. This function is not available in PC mode.


18

TintAdjusts the tint of the picture. Only adjustable in the NTSC signal system.

SharpnessAdjusts the sharpness of the picture. This function is not available in PC mode.

Colour temperatureAdjusts the colour temperature of the picture. Select from Warm, Personal, Cool or Medium. Press the [ OK ] button to enter the colour temperature sub-menu.

Cool: BlueWarm: RedMedium: Keep the original whitePersonal: Customise the colour temperature

Aspect ratioChoose from six modes available: Auto, Panorama, Zoom2, Zoom1,16:9 and 4:3.

Picture noise reductionChoose from four modes available: Off, Low, Middle and High.


19

Sound settings

Sound modeChoose from five sound modes available: User, Standard, Music, Movie and Sports. "Bass" and "Treble" can only be adjusted when the sound mode is set to "User".

Bass Adjusts the low frequency of the sound.

Treble Adjusts the high frequency of the sound.

BalanceAdjusts the volume level to the left and right speakers.

AVLWhen the auto volume level (AVL) is set to "On", the volume will be adjusted automatically according to the audio input source.

Surround soundSelect this option to set surround sound to "On" or "Off".

AD SwitchPress the [ OK ] button to enter the AD (audio dynamic) switch sub-menu. Select AD switch and set it to "On" or "Off" (only for digital television in DTV state).Select AD Volume to adjust AD Volume.

SPDIF ModeChoose from three modes available: PCM, Auto and DOLBY.


20

Channel settingsNOTE: These settings are only available in ATV, DTV and DTV+ATV mode.

Auto searchPress the / buttons to select Auto Search, then press [ OK ] to enter the Auto Search sub-menu. A Channel Search menu will appear as below.

Press the / buttons to select ATV, DTV or DTV+ATV. Press the / buttons to select your country of residency, then press [ OK ] to search a channel.

DTV manual search/ATV manual searchIf you want to tune your TV channels manually, press the / buttons to select (DTV or ATV) manual search, then use the / buttons to select the available channels.

Program editThis setting lets you edit channels. Select a channel and then use the coloured buttons on the remote control. Press the 'red' button to delete the channel, the 'yellow' button (only in ATV mode) to move it (change its position in the list) and the 'blue' button to skip the channel (so it will automatically skip when scanning the channels). Once you have selected your setting, press [ OK ] to confirm.

Signal informationShows the quality and signal strength of the channel.


21

Set-up settings On-screen display (OSD) languagePress the / buttons to select your desired OSD language.

Restore factory defaultSelect this setting and the TV will automatically restore all factory default setting. WARNING: All your selections (such as channels, favourites, password etc.) will be lost.

Hearing impairedPress the / buttons to select Hearing Impaired, if you want subtitles displayed in the programs (where available).

CountryThis setting displays the country of operation and cannot be changed.

PVR file systemSelect this setting to check any external drive connected to the TV for correct formatting.


22

Advanced settingsPress the / buttons to select Advanced menu, then press the [ OK ] button. To enter the menu, input the default password: "0000".

Set passwordTo set your own password, first enter the old password, and then enter your new password twice, following the prompts as illustrated below.

Parental control You can set the parental control function to suit viewing for children of all ages. Choose from the following categories:1. "C" Suitable for all children2. "G" Suitable for general audiences3. "PG" Parental guidance recommended for young viewers4. "M" Recommended for mature audiences5. "MA15+" Not suitable for anyone under 156. "R18+" Not suitable for anyone under 187. "AV15+" Not suitable for anyone under 15 (AV connections disabled)

Software update (USB)Select this setting for software updates that the manufacturer may supply.


23

Introduction: the UPlayer (USB)This TV has a UPlayer function (media player) which lets you view video, music, photo and text files from a USB storage device; the USB port will be named as C:\ drive.

1. Connect a USB storage device to the UPLAYER input terminal.2. Press the [UPlayer] button on the remote control to enter Media Player mode.3. Press / to select the type of media mode: Video, Music, Photo or Text.

Important notesWhen using the UPlayer, remember the following important points:

1. Some USB storage devices may not be compatible for smooth operation with this TV.

2. We strongly recommend you back up all data in the USB storage device so you do not risk losing any data in case of an unexpected accident. We do not assume liability for any loss of data due to misuse or malfunction. Data backup is your personal responsibility.

3. For large file sizes, the loading speed may be slightly longer.

4. The recognition speed of a USB storage device may vary depending on the device.

5. When connecting or disconnecting the USB storage device, ensure that the TV is not in Media mode, otherwise the USB storage device or the files stored in it may be damaged.

6. Only use a USB storage device formatted in a FAT16, FAT32 or NTFS file system provided with the Windows operating system. If it is formatted as a different utility program that is not supported by Windows, it may not be recognised.

7. When using a USB hard disk drive that requires an electric power source, ensure its power does not exceed 500mA.

8. An "Unsupported File" message will be displayed if the file format is unsupported or corrupted.


24

CAUTION: For optimal connection and to avoid damage to your TV, use only cables with the following maximum dimensions (A = thickness, B = width).

• HDMI cable: not exceeding 10mm (A) x 20mm (B)• UPlayer input: not exceeding 7mm (A) x 18mm (B)

UPlayer controlPress the [UPlayer] button on the remote control to enter the Media Player main menu.Press / to select the types of media mode (Video, Music, Photo, Text).Press / to select a folder or media file.Press [ OK ] to open a folder.Press to start playback.Press to resume playback, when in pause mode.Press to resume playback, when in search forward/backward mode.Press to stop playback.Press to search forward during playback.Press to search backward during playback.Press to skip to the next track during playback.Press to skip to the previous track during playback.Press [ MENU ] to enter or exit the TV menu.Press [ V- ] or [ V+ ] to adjust the volume during playback.

Media file playback supportSupported video file types:Video format: DivX, MPEG2, MPEG4, AVC, RMVB (Note: Does not support H264 files.)Resolution (max): 1920 x 1080Frame rate: Under 30 frames/sec (1920 x 1080)Audio format: MPEG, MP3Supported audio file types: (*.mp3)Supported photo file types: (*.jpg)Supported text file types: (*.txt)

Connections


25

Video menu1. Press / to select Video, then press [ OK ] to enter the menu.2. Press / to select the desired drive and press [ OK ] to enter.3. Press / to select the desired folder and press [ OK ] to open the folder; or press /

to select the desired video file and press [ OK ] to start playing.4. Press to stop video playback and return to the video list.5. Press to return to the previous menu.6. Press [UPlayer] to return to the media player main menu.

Video control bar

While playing a video from your USB storage device, you can use the buttons around the UPlayer button on your remote control for video playback actions, or use an on-screen video control bar.

Press the [ INFO ] button to display the video control bar while playing a video.Press the / buttons to navigate between the different functions.Press the / buttons to select the desired settings.

Pause

List CurrentInformation

ElectionPlay

Zoom in Zoom out Move

Fast Reverse

FastForward

Previous Next Stop Play Mode

RepeatPlay


26

Music menu1. Press / to select Music, then press [ OK ] to enter.2. Press / to select the desired drive, then press [ OK ] to enter.3. Press / to select the desired folder, then press [ OK ] to open the folder, or press /

to select the desired music file, and then press [ OK ] to start playback.4. Press to stop music playback and return to the music list.5. Press [ MENU ] to return to the previous menu.6. Press [UPlayer] to return to the media player main menu.

- Press the [ INFO ] button to display Music Repeat Mode while playing music.- Press / to select the repeat mode from "All Tracks", "Repeat None"and "Current Track".

How to view photos or read text files while listening to music1. Select the music file you want to play, then press [ OK ] to start playback.2. While the music is playing, press [UPlayer] to continue playing all music files in the folder

(or the selected file if the repeat mode is set to "Current") and return to the media player main menu.

3. Press / to select Picture or Text, then press [ OK ] to enter.4. Press / to select the desired drive, then press [ OK ] to enter.5. Press to return to the previous menu (if necessary).6. Press / to select the desired photo or text folder, then press [ OK ] to open the folder,

or press / to select the desired photo or text file and press [ OK ] to start the slideshow or to read the text file.

NOTE:- This menu only shows files with the MP3 file extension. Files with other file extensions are

not displayed, even if they are saved on the same USB storage device.- An over-modulated MP3 file may cause some sound distortion during playback.- After 10 minutes of music playback without pressing any remote control buttons, the TV

will enter screen saver mode automatically. Press any button to exit screen saver mode.- This TV supports lyrics display (English), maximum number of characters per line is 28.- The file name of music and lyrics must be the same in order to display lyrics while the music

is playing.


27

Photo menu1. Press / to select Photo, then

press [ OK ] to enter.2. Press / to select the desired

drive, then press [ OK ] to enter.3. Press / to select the desired

folder and press [ OK ] to open the folder; or press / to select the desired picture file and press [ OK ] to start playing.

4. Press to stop the picture display and return to the picture list.

5. Press to return to the previous menu.6. Press [UPlayer] to return to the media player main menu.

- Press the [ INFO ] button to display the Photo Control Bar during the photo slide show.- Press / to navigate.- Press / to select the desired settings.

Rotate photo Select the rotating angle, either counter-clockwise 90 degrees or clockwise 90 degrees. Press to continue the slide show.

Repeat modeChoose from "None", "Single" and "All'.

Zoom modePress the / / / buttons to pan the zoomed picture. Press to continue the slide show.

Pause

Rotate 90° clockwise

Rotate 90° anti

clockwise

Zoom in Zoom out Move

Fast Reverse

FastForward

Stop Play Mode

Music Mode

List Current Information


28

Text menu1. Press / to select Text, then press [ OK ] to enter.2. Press / to select the desired drive, then press [ OK ] to enter.3. Press / to select the desired folder and press [ OK ] to open the folder; or press /

to select the desired text file and press [ OK ] to start playback.4. Press to stop text playback and return to the text list.5. Press to return to the previous menu.6. Press [UPlayer] to return to the media player main menu.

- Press / to view the previous or next text file.- Press / to select the previous or next page in the text file.- Press to exit and return to the previous menu.

NOTE:- It supports *.txt files.- The text file must be saved in an encoding standard (e.g. Unicode). This may minimise the

loss of characters in a multiple-language content.


29

FAQs

Problem Solution

No picture, no sound 1. Check if the house fuse or circuit breaker is working by checking that all the fuse inside your main fuse box are ON or test the wall outlet is working by trying with another electrical product e.g. a desk lamp.

2. Make sure your wall socket is switched on and is working properly (to check this, plug another electrical device into the outlet).

3. Make sure the plug is securely inserted into the outlet.4. Make sure all connections are secure.

No colour 1. Change the colour system. 2. Adjust the saturation. 3. Try another channel. 4. Check if the program is broadcast in black-and-white.

Remote control does not work

1. Change the batteries.2. Check that the batteries are installed correctly.3. Ensure the TV is connected to the mains power.

No picture, normal sound 1. Adjust the brightness and contrast.2. Broadcasting may be interrupted.

Normal picture, no sound 1. Press the Volume + button to increase the volume.2. Press MUTE to restore sound if the volume is set to mute.3. Change the sound system.4. Broadcasting may be interrupted.

Ripples in the picture This is usually caused by local interference from things such as cars, fluorescent lights or hair dryers. Adjust the antenna to minimise the interference.

Blank screen in PC mode Perhaps the TV cannot recognise the resolution set by the PC. Try setting it to the best resolution possible, or to another standard Windows resolution. Set the refresh rate to 60Hz by right clicking with your PC mouse onto your PC Desktop, select "screen resolution" then select "advance settings" and set your refresh rate with the "screen refresh rate" drop down menu and press "apply".


30

Problem Solution

Snowy dots and interference

If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots. When the signal is extremely weak, you may need to install a special antenna to improve the reception. Other options include:1. Adjust the position and orientation of the indoor/

outdoor antenna.2. Check the connection of the antenna.3. Fine tune the channel by selecting the channel into "Channel Setting" (see page 20) and scroll down to "Fine Tune" to slightly adjust the frequency.4. Try another channel. Broadcasting may be interrupted.

Pixellation, picture breaking up

Black spots or horizontal streaks appear, or the picture flutters or drifts. This is usually caused by interference from a car ignition system, neon lamps, electric drills or other electrical appliances.

Ghost (analog TV only) Ghosts are caused by the television signal following two paths: one is the direct path, the other is reflected from tall buildings, hills or other objects. Changing the direction or position of the antenna may improve the reception.

Radio frequency interference

This interference produces moving ripples or diagonal streaks and, in some cases, loss of contrast in the picture. Identify and remove the radio interference source.


31

Specifications

Screen size (diagonal) 80cm viewing area

Screen resolution 1366 x 768

Audio output power (L + R) 5W + 5W

Working voltage 100-240V ~ 50/60Hz

Rated power consumption 130W

Dimensions (W x H x D) 789 x 580 x 200 mm

Net weight 10kg

Environment Working temperature: 5oC – 35oCWorking humidity: 20% – 80%

Storage temperature: -15oC – 45oCStorage humidity: 10% – 90%

Channel coverage 470MHz Full-Channel Cable TV

System TV: PAL, SECAM, BG, D/K, IAV: PAL, SECAM, NTSC PLAYBACK

Preset programs 99 (1 – 99)

Status displaying method On-screen display

Function adjustment indicator Menu display

OSD language Multiple options

RF aerial input 75 ohm unbalanced

AV video input 75 ohm, 1.0Vp-p, RCA

AV audio input 10k ohm, 0.5Vrms

AS-32HD1 81cm (32 inch) LCD HD TV VIVID Instruction Manual

Documents

Transcript of AS-32HD1 81cm (32 inch) LCD HD TV VIVID Instruction Manual