Articles List Manufacturing Technology Volume 15 Year...

Title Volume Year No. Article title Author(s) pages No. ofarticle

15 1 Brazing Operation for Aluminium Semi-Products by Heat Treatment Ján Bezecný, Andrej Dubec, Mariana Janeková 3-7 M20150115 1 Evaluation of Ride Comfort for Passengers by Means of Computer Simulation Ján Dižo 8-14 M201502

15 1 The Effect of Plasma Nitriding Process on the Change of Dynamic Parametersof Steel DIN 1654/4 David Dobrocky, David Kusmic 14-20 M201503

15 1Measurement and Analysis of Mass Flow and Abrasive Sieving Impact onTechnological Head Vibrations during Cutting Abrasion Resistant Steels withAbrasive Water Jet Technology

Stanislav Fabian, Štefánia Salokyová 20-24 M201504

15 1 Use of Parametric 3D Modelling - Tying Parameter Values to Spreadsheets atDesigning Molds for Plastic Injection

Michal Fabian, Róbert Boslai, Peter Ižol, Jaroslava Janeková, Jana Fabianová,Gabriel Fedorko, Pavol Božek

24-31 M201505

15 1 The Influence of High Temperature Loading on the Structure of Fine Al PowderCompacts Ernest Gondár, Pavol Sejč, Alexander Schrek 31-35 M201506

15 1 The Heat Treatment of Aluminium Bronzes Jiří Hájek, Antonín Kříž, Václav Hrdlička 35-41 M201507

15 1 Long-term Sub-zero Treatment of P/M Vanadis 6 Ledeburitic Tool Steel – aPreliminary Study

Peter Jurči, Martin Kusý, Jana Ptačinová, Vladimír Kuracina, Petra Priknerová 41-47 M201508

15 1 Changes of the Surface Texture after Surface Treatment HS6-5-2-5 Steel Ondřej Klanica, Emil Svoboda, Zdeněk Joska 47-53 M201509

15 1 The Influence of Heat Treatment on Mechanical and Corrosion Properties ofWrought Aluminium Alloys 2024 and 6064

Tomáš Kovalčík, Jan Stoulil, Peter Sláma, Dalibor Vojtěch 54-61 M201510

15 1 Non-contact Study of Surfaces Created Using the AWJ Technology Tibor Krenický 61-64 M20151115 1 Corrosion Resistance of Plasma Nitrided Structural Steels David Kusmic, David Dobrocky 64-69 M20151215 1 Influence of Drying Process of Liquid Contaminants on Adhesive Bond Strength Miroslav Müller, Petr Henc, Anna Rudawska 70-74 M201513

15 1 Role of Reactive Sintering in Production of Technically ImportantIntermetallics

Pavel Novák, Jan Kříž, Alena Michalcová, Pavel Salvetr 74-77 M201514

15 1 Influence of the Shock Absorbers Type Change at Stress of the TrolleybusChassis Pavel Polach 77-86 M201515

15 1 Analysis of Arc Stability in MIG Brazing of 304L Stainless Steel Using Solid andFlux-Cored Wire Pavol Sejč, Rastislav Kubíček 86-92 M201516

15 1 An Analysis of the Influence of the Titanium Compressor Wheel on the Dynamical Properties of the Particular Turbocharger Rotor

Luboš Smolík, Zdeňka Rendlová, Miroslav Byrtus 93-99 M201517

15 1 Analysis of the Influence of Initiating Inclusions on Fatigue Life of Plasma Nitrided Steels Zbyněk Studený 99-105 M201518

15 1 Unconventional Method of Preparation Intermetallic Phases Fe-Al by Mechanical Alloying in Comparison to Reactive Sintering

Milan Valalik, Pavel Novak, Tomas Frantisek Kubatik, Dalibor Vojtech 105-109 M201519

15 1 The Influence of Shift on Machined Surface Microgeometry and Its Use Karol Vasilko 109-116 M20152015 2 Design of Double-row Magnetic Cycloid Gearbox Juraj Bezák, Peter Bezák, Alena Vajdová 119-125 M20152115 2 Briquettes Made from Wood Residues Milan Brožek 126-130 M201522

15 2 Analysis of CT Stress during Horizontal Annular-Delivery Sand Fracturing Feng Fuping, Ai Chi , Yu Fahao, Wang Yishan, Zhou Junran, Guo Chao 130-136 M201523

15 2 Milling Stability Prediction on Small Radial Immersion – Comparison SD Method and ZOA Method Yunlin Huang, Juntang Yuan 136-143 M201524

Articles ListManufacturing Technology | Volume 15 | Year 2015

ISSN 1213‐2489

Man

ufac

turin

g Te

chno

logy

Febr

uary

201

5



ISSN 1213‐2489

15 2 Investigation of Vertical Vibration of a Vehicle Vodel Driving Through a Horizontal Curve Frantisek Klimenda, Martin Svoboda, Lenka Rychlikova, Alena Petrenko 143-148 M201525

15 2 The Influence of Heat Treatment on Mechanical and Corrosion Properties of Wrought Aluminium Alloys 2024 and 6064

Tomáš Kovalčík, Jan Stoulil, Peter Sláma, Dalibor Vojtěch 148-155 M201526

15 2 Thermally Stable Al-Fe Based Alloys Produced from Secondary Materials Jan Kříž, Pavel Novák 155-161 M201527

15 2 Deformation Zone Distribution of Continuous Extrusion Process Yong Li, Yuxin Zhang, Shiqiang Cui, Ruizhu Zhang, Yi Zhong 161-166 M201528

15 2 Improving the Hydrogen Release Capacity of NaBH4 Via Mediation of Catalysts with Rare Metal Compounds

Yong Li, Yuxin Zhang, Yufei Cai, Xueping Zheng, Ruizhu Zhang 166-170 M201529

15 2 Machining Process & Information Modeling Based on MBD Procedure Machining Cell Linlin Liu, Rong Mo, Neng Wan 170-176 M20153015 2 Polishing of CVD Diamond Films in Vacuum Yongtao Ma, Yanmin Li, Zhanshu He 177-183 M20153115 2 Research of Loading of Structural Bonds Created with One-Component Epoxy Adhesives Miroslav Müller, Jan Cidlina 183-188 M20153215 2 Influence of Cutting Tool Overhangs at Machining of Hardened Steels Karel Osička, Zuzana Fišerová, Jan Otoupalík 188-191 M201533

15 2 Wear Simulation Modeling by Using the Finite Element Method Zoran Pelagić, Martin Nágeľ, Milan Žmindák, Daniel Riecky 191-195 M201534

15 2 Production Method of Implant Prototype of Knee-Joint Femoral Component Josef Sedlak, Martin Slany, Zdenek Fiala, Ales Jaros 195-204 M201535

15 2 Setup System of Selective Roll Cooling Based on Profile Prediction in Aluminum Hot Strip Jian Shao, Chihuan Yao, Wenquan Sun Anrui H 204-209 M20153615 2 Comparison of the Continuous and Intermittent Relaxation Test Vladimir Sleger, Cestmir Mizera 210-214 M20153715 2 Microstructure and Mechanical Properties of the Forged Mg-Gd Alloy Xu Sun, Zhanyi Cao, Shurong Sun, Yongbing 214-219 M201538

15 2 Research on Distribution of Residual Stresses of Cold Rolled Sheet Distorted Area Based on ANSYS Wenquan Sun, Jian Shao, Anrui He, Pujun Hao 220-226 M201539

15 2 Effect of Impacts on Human Head Martin Svoboda, Josef Soukup, Karel Jelen, Petr Kubový 226-231 M201540

15 2 Properties of Adhesives Used for Connecting in Automotive Industry Petr Valášek, Miroslav Müller 232-237 M201541

15 2 Preparation of Ultra-Fine Grained Alloys Based on Fe-Al-Si And Ti-Al-Si Intermetallic Com-pounds by Powder Metallurgy Using the Mechanical Alloying Jiří Vystrčil, Pavel Novák, Alena Michalcová 238-242 M201542

15 2 Study on Mechanical Properties of the Composite Resin Matrix Fiber Reinforced Min Wen, JiXiang Luo 243-249 M201543

15 2 Design and Implement of Infrared Thermography Detection System Excited by Pulsed Flash Lamp

Zheng-Wei Yang, Qian Luo, Gan Tian, Wei Zhang, Jie-Tang Zhu 249-255 M201544

15 2 Studies of Turbidity in the Ultrasonic/Ceramic Membrane Combined Process JiLun Yao, Bin Xie, Yuzheng Lv 254-260 M20154515 3 Structural Design of Blocking Element of Magnetic Cycloid Transmission Juraj Bezák, Peter Bezák, Alena Vajdová 263-266 M201546

15 3 Meaning of Quality Inspection and Control Methods during Manufacturing Process of Metal Sheet Stampings

Stanisław Borkowski, Krzysztof Knop, Paweł Szklarzyk 266-274 M201547

15 3 Increasing the Production System Productivity Using Inertial Navigation Pavol Božek, Yuri Nikitin, Pavol Bezák, Gabriel Fedorko, Michal Fabian 274-278 M201548

15 3 Application of Laser Shock ProcessingJan Brajer, Jan Mádl, Roman Švábek, Zdeněk Pitrmuc, Danijela Rostohar, Pavel Zeman, José Luis Ocaña

278-285 M201549

Man

ufac

turin

g Te

chno

logy

Apr

il 20

15



ISSN 1213‐2489

15 3 Spruce Plywood Bonding Milan Brožek 285-291 M20155015 3 Inovative Methodology for Hot Tears Analysis in the Aluminum Castings Marek Brůna 291-294 M201551

15 3 Insights for the Selection of the Machining Parameters in the Turning of Difficult-To-Cut Coatings

Diego Carou, Jan Řehoř, Peter Monka, Igor Vilček, Šárka Houdková 295-303 M201552

15 3 Surface Treatment Technologies for Wear Resistance Increasing of 42CrMo4 Steel Van Thanh Doan, David Kusmic, Miroslav Pospichal 303-307 M201553

15 3 The Assessment of Selected Mechanical Properties of Steel after Application of Plasma David Dobrocký, David Kusmič 307-315 M201554

15 3 Structural Characteristics of Cr-Mo Steels Microalloyed with CeriumJaromír Drápala, Pavel Machovčák, Petr Jonšta, Vu The Ha, Silvie Brožová, Gabriela Kostiuková, Michal Madaj

315-322 M201555

15 3 Experimental Investigation and Analysis of Cutting Forces When Machining X5CrNi18-10 Stainless Steel Rozmarina Dubovska, Jozef Majerik 322-329 M201556

15 3 Effect of Spindle Unit Extrusion on Stability of Machining Process Zdenek Fiala, Ales Jaros, Josef Sedlak, Ladislav Kolar, Vendula Blazkova 329-333 M201557

15 3 Optimization of Overmolding Process of Metal-Plastic Part Ernest Gondár, Alexander Schrek, Pavol Švec 334-339 M201558

15 3 The Research Results in the Area Of Environmental Taxation of Manufacturing Business Entities in the Czech Republic Zdeněk Hruška, Lilia Dvořáková 339-344 M201559

15 3 Non-Destructive Experimental Method for Determination of Modulus of Elasticity of Hydraulic Hoses

Lumír Hružík, Adam Bureček, Martin Vašina, Ondřej Bílek 344-350 M201560

15 3 Numerical Study on Effect of Narrow Groove On Hot Bearing Ring Rolling Process Jia Z., Han Z. R., Peng W. F. 350-357 M201561

15 3 The Effect of Cutting Temperature on Carbide Drilling Life in the Process of CFRP/Steel Stacks Drilling

Vitalii Kolesnyk, Dmytro Kryvoruchko, Michal Hatala, Dusan Mital, Zuzana Hutyrova, Jan Duplak, Mohammed Alowa

357-362 M201562

15 3 The Determination of the Shelf Mass in the Universal Shelving Stacker by Measuring the Frequency Converter Torque Generating Current of the Main Drive Pavol Kollár, Yuri Nikitin, Martin Straka 363-366 M201563

15 3 Effects of a Cutting Fluid on Aerosol Size Distribution during TurningLuboš Kotek, Petra Semanová, Erika Sujová, Miroslav Dado, Marián Kučera, Richard Hnilica, Martin Jonák

367-373 M201564

15 3 Material Analysis of Damaged Breech Locking Element of Machine Gun David Kusmic, Zbynek Studeny, Emil Svoboda 373-377 M201565

15 3 Compressive Creep Testing of Composites on the Based of MoSi2 – SiC Nanoparticles Natália Luptáková, Beáta Ballógová, Petr Dymáček 377-380 M201566

15 3 Cutting Tool Wear Monitoring Jan Madl, Michal Martinovsky 380-384 M201567

15 3 Design Theory for Screw Geometry in a Briquette Press Miloš Matúš, Ľubomír Šooš, Peter Križan, Juraj Beniak, Juraj Ondruška 384-391 M201568

15 3 Research on Constructional Shape of Bond at Connecting Galvanized Sheet of Metal Miroslav Müller 392-396 M201569

15 3 Investigations of Cutting Tool Wear While Machining Inconel 718 Jana Petru, Jan Schiffner, Tomas Zlamal, Marek Sadilek, Dana Stancekova 396-403 M201570

Man

ufac

turin

g Te

chno

logy

June

201

5



ISSN 1213‐2489

15 3 Characteristics of Plasma Nitrided Layers Zdenek Pokorny, Zbynek Studeny, Miroslav Pospichal, Zdenek Joska, Vojtech Hruby 403-409 M201571

15 3 Reaming of Very Precise Holes in Hydrostatic Component Jan Řehoř, Jaroslava Fulemová, Daniel Rut, Veronika Třísková, Jan Kutlwašer, Karel Kouřil 409-415 M201572

15 3 Testing of Implant Prototype of Femoral Component Using Hydraulic Machine ZD40 Josef Sedlak, Martin Slany, Zdenek Fiala, Ales Jaros, Vendula Blazkova 416-423 M201573

15 3 Deposition of Aluminium Oxide (Al2O3) Coatings on Aluminium Substrate Using Anodizing Processes Frantisek Snahnican 423-428 M201574

15 3 Operational Risk Management and Treatment at Technical Systems with Maintenance Support Martin Stavek, Zdenek Ales, Vaclav Legat, Adam Teringl 429-435 M201575

15 3 The Modification of System for the Angle of Attack Setting at Roller Rig RAILBCOT Veronika Štefaňaková, Lenka Valčáková 435-443 M201576

15 3 Material Analysis of 120 mm Mortar Projectile Stabilizer Zbyněk Studeny, Zdenek Pokorny, David Kusmič, Emil Svoboda 443-448 M201577

15 3 Design of Experiments for CNC Turning Stusek Jaromir, Macak Tomas 448-455 M201578

15 3 Dependability Characteristics – Indicators for Maintenance Performance Measurement of Manufacturing Technology Adam Teringl, Zdeněk Aleš, Václav Legát 456-461 M201579

15 3 Barkhausen Noise Emission of Surfaces after Laser Beam Machining Alena Vajdova, Anna Micietova,, Maria Cillikova, Miroslav Neslusan 462-468 M201580

15 3 Influence of Surface Treatment of Steel Adherends on Shear Strength of Filled Resins Petr Valášek 468-474 M20158115 3 Test Stand Dynamics Properties Investigation by Means of Simulation Computations Lenka Valčáková, Veronika Štefaňaková 474-483 M20158215 3 Question of Optimal Cutting Speed for Machining by Conventional and Coated Cutting Tools Karol Vasilko, Zuzana Murčinková 483-490 M201583

15 3 Analysis of Fiber Orientation Influence to Dynamic Properties of Composite Structures Milan Žmindák, Zoran Pelagić, Jozef Soukup 490-494 M201584

15 4 Effect of Surface Roughness on the Fatigue Life of Laser Additive Manufactured Ti6Al4V Alloy

Adrián Bača, Radomila Konečná, Gianni Nicoletto, Ludvík Kunz 498-502 M201585

15 4 Nanoadditives SiO2 and TiO2 in Process Fluids Totka Bakalova, Petr Louda, Lukáš Voleský, Karolína Borůvková, Lucie Svobodová 502-508 M201586

15 4 The Overview of Intermetallic Phases Presented in Nickel Base Superalloys afterPrecipitation Hardening

Juraj Belan, Lenka Kuchariková, Eva Tillová, Milan Uhríčik 509-515 M201587

15 4 Phase Segregation during Processing of Semi-Solid Slurry by Rheocasting Method SEED Barbora Bryksí Stunová, Vlastimil Bryksí 515-520 M201588

15 4 Influence of Adhesive Bonded Surface Treatment of Alloy Alcu4mg and IncreasedEnvironmental Temperature on Adhesive Bond Strength Jan Cidlina, Miroslav Müller 520-526 M201589

15 4 Influence of Homogenization Annealing on Internal Damping Depending on the Vibration Amplitude Measured on Specimens AZ31 and AZ91

Zuzana Dresslerová, Peter Palček, Milan Uhríčik 526-530 M201590

15 4 Morphological Classification of Nonferrous Wear Particles in Engine Oil Using Pherrographical Method Vladimír Hönig 530-534 M201591



ISSN 1213‐2489

15 4 Fractal Geometry Used for Evaluation of Corrosion Resistance of Fe-14Al-6Cr Wt. % against Molten Glass Adam Hotar, Vlastimil Hotar 534-541 M201592

15 4 Surface Roughness Optimization in Milling Aluminium Alloy by Using the Taguchi´s Design ofExperiment Julia Hricova, Natasa Naprstkova 541-546 M201593

15 4 Root Cause Analysis for Identifying Defects in the Process of Cylinder Head Castings from Aluminium Alloy

Daniela Kalincová , Miroslava Ťavodová, Helena Čierna 546-553 M201594

15 4 Structure of Al-targets Used for PVD Coating in Jewellery Pavel Kejzlar, Zuzana Andrsova, Martin Švec 553-557 M201595

15 4 Ultrasonic Testing of Non-ferrous Materials in the Foundry Industry Radoslav Konar, Marek Patek, Andrej Zrak 557-562 M201596

15 4 Preparation and Properties of Composite Materials with Magnesium Matrix and Hydroxyapatite Reinforcement

Jiri Kubasek, Dalibor Vojtěch, Drahomir Dvorsky 562-567 M201597

15 4 The Effect of Casting Technology on Fe Intermetallic Phases in Al-Si Cast Alloys Lenka Kuchariková, Eva Tillová, Juraj Belan, Milan Uhríčik 567-571 M201598

15 4 Abrasive Machining of Ti6Al4V Alloy Radek Lattner, František Holešovský, Tomáš Karel, Michal Lattner 571-575 M201599

15 4 Influence of Surface Refinement on Microstructure of Al-Si Cast Alloys Processed by WeldingMethod Tomasz Lipiński 576-581 M2015100

15 4 Modification of Al-11% Si Alloy with Cl – Based Modifier Tomasz Lipiński 581-587 M2015101

15 4 Parameters Affected Corrosion and Mechanical Properties of Al-Brasses Tatiana Liptáková, Martin Lovíšek, Branislav Hadzima 587-591 M2015102

15 4 Simulation Calculations of Solidification and Cooling of Copper Alloy Casts Jiří Machuta, Iva Nová 591-596 M2015103

15 4 Preparation and Mechanical Properties of Ultra-High-Strength Nanocrystalline Metals Ivo Marek, Dalibor Vojtěch, Alena Michalcová, Tomáš František Kubatík 596-600 M2015104

15 4 Influence of Chemical Etching on Surface Micro-Geometry of Titanium Implants Anton Martikan, Jozef Struharnansky, Dana Stancekova, Andrej Czan, Michal Hatala 601-604 M2015105

15 4 Effect of Different Modifiers and Heat Treatment on Structure, Hardness and Microhardness of AlSi7Mg0.3 Alloy Michal Martinovský, Jan Mádl 604-610 M2015106

15 4 Microstructures of Iron Aluminides Processed by Additive Layer Manufacturing and Spark Plasma Sintering

Alena Michalcová, Martin Palm, Lucia Senčeková, Gesa Rolink, Andreas Weisheit, Tomas Frantisek Kubatík

610-614 M2015107

15 4 Research of the Cause Cracking Hot-Rolled Block Made of AlMg5 Alloys Stefan Michna, Jaromir Cais, Lenka Michnova 614-620 M2015108

15 4 Research the Causes of Surface Stains after Eloxal Coating for the Profile from the AlMgSi Alloy Using Substructural Analysis

Stefan Michna, Natasa Naprstkova, Dorota Klimecka-Tatar 620-624 M2015109

15 4 Mechanical Properties of Polymeric Composite Based on Aluminium Microparticles Miroslav Müller, Jan Cidlina, Karolína Dědičová, Alena Krofová 624-628 M2015110

15 4 Research on Surface Treatment of Alloy Alcu4mg Adhesive Bonded with Structural Single-Component Epoxy Adhesives Miroslav Müller 629-633 M2015111

15 4 Modifications AlSi9CuMnNi Alloy by Antimony and Heat Treatment and Their Influence on the Resulting Structure

Natasa Naprstkova, Radek Cervinka, Sylvia Kusmierczak, Jaromir Cais 634-638 M2015112

Man

ufac

turin

g Te

chno

logy

Sept

embe

r 20

15



ISSN 1213‐2489

15 4 Increasing the Quality of the Production Steering Wheel Castings Using Simulation Calculations of Solidification Iva Nová, Jiří Machuta, Josef Horáček 638-644 M2015113

15 4 New Composite Materials Based on NiTi Pavel Novák, Eva Kristianová, Milan Valalik, Clarisse Darme, Pavel Salvetr 644-647 M2015114

15 4 Hardness of the High Pressure Die Castings from Alloy AlSi9Cu3 in dependence on the Subsequent Processing Technology Iva Novakova, Jan Štverák, Jaromir Moravec 647-652 M2015115

15 4 Microwaves as a Humidity Measurement Device for Casted Moulds Jan Novotný, Petr Majrich 653-656 M2015116

15 4 Biodegradation Properties of Elektron 21 Magnesium Alloy Coated by Octacalcium Phosphate Miroslav Omasta, Branislav Hadzima 656-660 M2015117

15 4 Application of Dielectric Properties of Dental Material in Non-Destructive Testing Mária Pápežová, Dagmar Faktrová 660-664 M2015118

15 4 Analysis of Wear Particles Morphology of Machine Parts Based on Aluminium Zdeněk Aleš, Martin Pexa, Jindřich Pavlů, Marián Kučera, Jakub Čedík 664-670 M2015119

15 4 Impact of Viscosity of Motor Oil on the Wear of Plain Bearings Martin Pexa, Zdeněk Aleš, Jindřich Pavlů, Jakub Čedík 670-674 M2015120

15 4 Defects in High Pressure Die Casting Process Radka Podprocká, Jozef Malik, Dana Bolibruchová 674-678 M2015121

15 4 Grain refinement in Al-Mn-Fe-Si alloys by severe plastic deformation Michaela Šlapáková Poková, Miroslav Cieslar, Mariia Zimina 679-684 M2015122

15 4 Friction and Wear Behaviors of Al/Epoxy Composites during Reciprocating Sliding Tests Alessandro Ruggiero, Petr Valášek, Massimiliano Merola 684-689 M2015123

15 4 Ni-Ti Alloys Produced by Powder Metallurgy Pavel Salvetr, Pavel Novák, Hynek Moravec 689-694 M2015124

15 4 Quasi static tests of adhesive bonds of alloy AlCu4Mg Vladimír Šleger, Miroslav Müller 694-698 M2015125

15 4 Identification of Drilling of Biocompatible Materials Based on Titanium Dana Stancekova, Jan Semcer, Anna Rudawska, Robert Cep 699-704 M2015126

15 4 The Influence of Heat-Treatment on the Phase Composition and Coefficient of Thermal Expansion of Fe3Al – Type Alloy with Niobium Addition Martin Švec, Pavel Kejzlar 705-710 M2015127

15 4 Influence of Cutting Fluid on Abrasive – Free Ultrasonic Finishing of Aluminium AlloyJaroslava Svobodová, Pavel Kraus, Miroslav Müller, Anatolii Lebedev, Alexander Yurov, Pavel Lebedev

710-714 M2015128

15 4 Influence of Chemical Pre-treatments Nanotechnology Based Applied to the Al Sheet on the Roughness and Morphology of the Surface Jaroslava Svobodová, Pavel Kraus 714-720 M2015129

15 4 Impact Properties of Self-Hardening Aluminium Alloy (Alzn10si8mg) at Elevated Temperatures

Eva Tillová, Mária Chalupová, Lenka Hurtalová, Juraj Belan 720-727 M2015130

15 4 Change of Internal Friction on Magnesium Alloy Depending on the Temperature and the Use of Mathematical Methods in the Evaluation of This Property

Milan Uhríčik, Andrea Soviarová, Zuzana Dresslerová, Peter Palček, Lenka Kuchariková, Juraj Belan

727-732 M2015131

15 4 Al Microparticles Interaction with Epoxy Resin – Cohesion and Adhesion to Steel and Aluminum Petr Valášek 732-736 M2015132

M



ISSN 1213‐2489

15 4 Hydrogen Removal from Liquid Metal Iveta Vasková, J. Jančok, M. Hrubovčáková, M.Conev 737-739 M2015133

15 4 The Effect of Zirconium and Carbon Addition on Thermal Expansion of Fe3Al-Based Iron Aluminides Věra Vodičková, Pavel Hanus 739-743 M2015134

15 4 Microstructural Analysis of Nickel Influence in Alsi10mgmn Alloy with Increased Iron Level Maria Zihalova, Dana Bolibruchova, Jaromir Cais 743-748 M2015135

15 4 Influence of Chemical Composition in Steel on Laser Cutting Stability Andrej Zrak, Radoslav Koňár, Peter Jankejech 748-752 M2015136

15 5 Construction Product Quality Improvement with Applying Production Problems Analysis Renata Stasiak-Betlejewska 756-761 M2015137

15 5 Material Analysis of Projectile Hard Core Ján Bezecný, Ján Štrba, Andrej Dubec 762-765 M201513815 5 Checks Crane Hooks Miroslav Blatnický 766-771 M2015139

15 5 Measurement of Temperature Fields in Methal Hydride Storage Container Tomáš Brestovič, Natália Jasminská, Marián Lázár, Ľubica Kapustová 772-777 M2015140

15 5 Theoretical and Experimental Determination of a Velocity Profile under Turbulent Air Flow in Pipework

Mária Čarnogurská, Miroslav Příhoda, Marián Lázár 777-781 M2015141

15 5 Multibody System of a Rail Vehicle Bogie with a Flexible Body Ján Dižo, Jozef Harušinec, Miroslav Blatnický 781-788 M201514215 5 The Numerical Solution of the Aerodynamic Task Using by CFD Modelling Josef Dobeš, Milada Kozubková 788-795 M2015143

15 5 Investigation of Cutting Temperature during AlCu3MgMnPb Aluminium Alloy Turning Rozmarina Dubovska, Jozef Majerik, Ivan Baska, Jaroslav Jambor 796-801 M2015144

15 5 Proposal of Biomass Heat Source for Microcogeneration Unit Peter Ďurčanský, Jozef Jandačka 801-804 M201514515 5 Model of Heat Load on the Atmosphere by Flue Fases Ladislav Dzurenda 804-808 M2015146

15 5 3D Printing as an Alternative to Casting, Forging and Machining Technologies? Michaela Fousová, Dalibor Vojtěch, Jiří Kubásek, Drahomír Dvorský, Markéta Machová 809-814 M2015147

15 5 Geometrical Optimization of the Induction Heating Process in Order to Achieve Uniform Gloss on Plastics Components Andrej Gašparec, Milan Sága 814-820 M2015148

15 5 Analysis of Force Conditions of the Hot Forming Machine in Rolling-Out of Bearing Rings Marián Handrik, Milan Sága, Peter Pecháč, Peter Kopas 821-825 M2015149

15 5 Performance and Emission Parameters Change of Small Heat Source Depending on the Moisture

Michal Holubčík, Jozef Jandačka, Štefan Papučík, Peter Pilát 826-829 M2015150

15 5 Examination of the Machinability of Eutectic Aluminium Alloys Richard Horvath, Gyula Matyasi, Agota Dregelyi-Kiss 830-836 M2015151

15 5 Degradation Processes in the Contact Layers of Forming Tools Jiří Hrubý, Vladimíra Schindlerová, Josef 836-842 M201515215 5 Method of Vortex Structure Identification in Axisymmetric Flow Field Tomáš Hyhlík 842-845 M201515315 5 The Using of Vehicle Moving Simulation to Proposal of Construction Work Milan Chalupa 845-850 M2015154

15 5 Pressure Analysis on the Surface Gearing Investigated by Numerical Simulation of Oil Flow in the Tooth Wheel Gap Stanislav Jirouš, Karel Fraňa 850-853 M2015155

15 5 Numerical Simulation of Inviscid Compressible Fluid Flow Around Moving Bodies Jitka Klečková 854-857 M2015156ng T

echn

olog

y

mbe

r 20

15



ISSN 1213‐2489

15 5 Glass Furnace Controlling from Saving Energy Aspect Frantisek Klimenda, Blanka Skocilasova, Petr Skuthan, Martin Močilan 857-860 M2015157

15 5 Measurement of Flow Characteristics in a Model of Aneurysm by PIV and FLIF Method Jan Kolínský, Ludmila Nováková, Josef 861-865 M201515815 5 CO2 Dispersion after Combustion Tomas Korinek, Karel Frana 866-870 M201515915 5 Machinability of Lead Free Copper Alloys Jan Madl, Vaclav Koutny 870-875 M201516015 5 A 3D Laser Scanner Setup for a Measuring of Geometrical Product Specifications Pavel Macháček, Rudolf Dvořák 875-881 M201516115 5 Induction Heating of Inner Rolling Bearing Ring in ANSYS Pavol Novak, Vladimir Dekys 881-885 M2015162

15 5 The Effect of Plasma Nitriding Parameters on the Thickness of Nitrided Layers Ondrej Pilch, Frantisek Snahnican, Vojtech Hruby, Zbynek Studeny 885-889 M2015163

15 5 Influence of Initial Carbon Concentration on Nitride Layers Miroslav Pospíchal, Renata Dvořáková, Zbyněk Studený, Zdeněk Pokorný 889-893 M2015164

15 5 Analysis of Selected Thermodynamic Derivative Properties of Natural Gas Pipeline Flow Model

Ján Rajzinger, František Ridzoň, Milan Malcho, Jozef Jandačka 893-899 M2015165

15 5 High-Speed Cutting of Bearing Rings from Material 100Cr6 Josef Sedlak, Pavel Tropp, Josef Chladil, Karel Osicka, Petra Sliwkova 899-908 M2015166

15 5 Solidification of the Aluminium Alloy in the Mold Blanka Skočilasová, Jan Skočilas 909-914 M2015167

15 5 Homogenization of Fibers Reinforced Composite Materials for Simulation Analysis Lukáš Smetanka, Juraj Gerlici, Tomáš Lack, Zoran Pelagić 914-920 M2015168

15 5 Arctic Air Cooler Josef Soukup, Petr Přibil, Blanka Skočilasová 920-924 M2015169

15 5 Numerical Simulation of Thermoelastic Stress Analysis Zuzana Stankovičová, Vladimír Dekýš, Pavol Novák, Milan Sapieta 925-930 M2015170

15 5 Freight Long Wagon Dynamic Analysis in S-Curve by Means of Computer Simulation Pavol Šťastniak 930-935 M201517115 5 Wagon Chassis Frame Design with Adaptable Loading Platform Pavol Šťastniak 935-940 M201517215 5 Automation of Filling Cryogenic Vessels with Perlite Jan Štěrba, Valérie Černohlávková, Josef 941-944 M2015173

15 5 The Downhill Braked Railway Wheel Structural Analysis by Means of the ANSYS Multiphysics Program System Package Andrej Suchánek, Jozef Harušinec 945-950 M2015174

15 5 Machining with Plastic Cutting Wedge Karol Vasilko 951-957 M2015175

15 5 Steady Flow in Various Geometries of the Carotid Artery Bifurcation Ondrej Vesely, Ludmila Novakova, Josef Adamec, Tadeas Balek 957-961 M2015176

15 6 Powder Metallurgical Techniques for Fabrication of Biomaterials Jaroslav Čapek, Dalibor Vojtěch 964-969 M2015177

15 6 Hydroxyapatite in Materials for Medical Applications Drahomir Dvorsky, Jiri Kubasek, Dalibor Vojtěch 969-973 M2015178

15 6 Investigation of Airflow inside Floor Convector and Its Surrounding Josef Egert, Karel Frana 973-977 M201517915 6 Comparison of the Influence of Process Fluids on Tool Life in Face Milling Jan Jersák, František Kaplan 977-984 M201518015 6 Essential Features of Process Fluids Applied in Machining Jan Jersák, Jan Žižka 985-991 M201518115 6 Rollers Vibration of Pipe Conveyor Frantisek Klimenda, Blanka Skocilasova 991-995 M201518215 6 Properties, Production and Applications of NiTi Shape Memory Alloy Eva Kristianová, Pavel Novák 995-998 M201518315 6 Numerical and Experimental Analysis of the Real Load Arising in the Cushion of the Car Seat Petr Kulhavý, Pavel Srb,Michal Petru 999-1005 M201518415 6 Evaluation of Degradation of Heat Stressed Pipelines Sylvia Kusmierczak 1006-1010 M2015185

Tech

nolo

gy

2015

Man

ufac

turi

Nov

em



ISSN 1213‐2489

15 6 Research and Analysis of the Sediments from Casting Furnaces and the Mechanism of its Štefan Michna, Jaromír Cais, Lenka Michnová 1010-1014 M201518615 6 Grinding of the Alloy INCONEL 718 and Final Roughness of the Surface and Material Share Martin Novak, Natasa Naprstkova 1015-1023 M201518715 6 Intermetallics – Synthesis, Production, Properties Pavel Novák, Pavel Salvetr, Zuzana Pecenová 1024-1028 M2015188

15 6 Properties of Welded Joints in Power Plant Jan Novotný, Jarmila Honzíková, Václav Pilous, Karel Stránský 1028-1032 M2015189

15 6 Testing of Zn-1.6Mg Alloy in Model Physiological Solution Iva Pospisilova, Šárka Msallamová, Dalibor Vojtech 1032-1036 M2015190

15 6 Mechanical Alloying: A Way How to Improve Properties of Aluminium Alloys Filip Průša, Dalibor Vojtěch, Adriana Bernatiková, Drahomír Dvorský 1036-1043 M2015191

15 6 Nusselt Number Criteria Equations in the Cross Flow over Single Tube Blanka Skočilasová, Jan Skočilas 1043-1048 M2015192

15 6 The Use of Colour Metallography and EDS for Identification of Chemical Heterogeneity of Selected Aluminium Alloys Copper and Zinc Alloyed Viktorie Weiss, Jaroslava Svobodová 1048-1053 M2015193

Man

ufac

turin

g T

Dec

embe

r

Title Volume Year Number Article title Author(s) pages No. of

article

14 1 Dynamic Forces in Unstable Cutting during Turning Operation Pavel Bach, Miloš Poláček, Petr Chvojka, Jiří Drobílek 3-8 M201401

14 1 Evaluation of Adhesive Bond Strength Depending on Degradation Type and Time Jan Cidlina, Miroslav Muller, Petr Valasek 8-12 M201402

14 1The Detection of Artificially Made Defects in Welded Joint with Ultrasonic defectoscopy Phased Array Daniel Dopjera, Miloš Mičian 12-17 M201403

14 1 Barkhausen Noise Emission of Surfaces Produced by Hard Milling Process Tomáš Hrabovský, Miroslav Neslušan, Branislav Mičieta, Mária Čilliková, Anna 17-23 M201404

14 1Diagnostics of CNC Machine Tools in Manufacturing Process with LaserInterferometer Technology

Jerzy Józwik, Ivan Kuric, Milan Sága, Paweł Lonkwic 23-30 M201405

14 1The Powdered Magnets Technology Improvement by Biencapsulation Method and its Effect on Mechanical Properties Dorota Klimecka-Tatar 30-36 M201406

14 1Influence of the Thermodynamic Phenomena on the Optimum Cutting Parameters inGrinding Karel Kocman 36-41 M201407

14 1Non-destructive Testing of Welds in Gas Pipelines Repairs with Phased ArrayUltrasonic Technique Radoslav Koňár, Milos Mičian 52-47 M201408

14 1 Effect of Machining the Load Capacity Notched Components Michal Lattner, Frantisek Holesovsky 47-50 M201409

14 1 Quality Evaluation of Surface Layer in Highly Accurate Manufacturing Stanislaw Legutko, Grzegorz Krolczyk, Jolanta Krolczyk 50-56 M201410

14 1 Evaluation of Mechanical Properties of Samples Printed by FDM Method Miloslav Linda, Miroslav Müller, Rostislav Chotěborský 56-60 M201411

14 1 Concept of Repairing Branch Pipes on High-Pressure Pipelines by Using Split Sleeve Miloš Mičian, Marek Patek, Augustín Sládek 60-66 M201412

14 1Influence of Cutting Conditions and Grinding Wheel Wear on Barkhausen Noise ofGround Surfaces

Marián Mičúch, Mária Čilliková, Miroslav Neslušan, Anna Mičetová 66-71 M201413

14 1 Influence of Adhesives Storing Temperature on Adhesive Bond Strength Miroslav Müller 71-75 M201414

14 1 Influence of Alsi7Mg0.3 Alloy Modification by Sb on the Tool Wear Nataša Náprstková, Jaromír Cais, Dana Stančeková 75-79 M201415

14 1 Computer Design of Robot ABB IRB 140 Transport System from Manufacturing Point of View Jozef Novak-Marcincin, Miroslav Janak, Dominik Takac 79-84 M201416

14 1Production of ABS-Aramid Composite Material by Fused Deposition Modeling Rapid Prototyping Systém

Ludmila Novakova-Marcincinova, Jozef Novak-Marcincin 85-91 M201417

14 1 Identification of Machinability of Ceramic Materials by TurningDana Stancekova, Tomas Kurnava, Michal Sajgalik, Natasa Naprstkova, Jozef Struharnansky, Peter Ščotka

91-97 M201418

14 1 Effect of the Inclination Angle on the Defining Parameters of Chip Removal in Rotational István Sztankovics, János Kundrák 97-104 M20141914 1 Practical Application of Quality Tools in the Cast Iron Foundry Robert Ulewicz 104-111 M20142014 1 New Experimental Dependence of Machining Karol Vasilko 111-116 M201421

14 1 Finite Element Analysis of Crack Growth in Pipelines Milan Žmindák, Jozef Meško, Zoran Pelagić, Andrej Zrak 116-122 M201422


ISSN 1213‐2489

Man

ufac

turin

g Te

chno

logy

Mar

ch 2

014


article


ISSN 1213‐2489

14 2 Transformation Methods of Production Organization from the Far East to the MetalIndustry in Poland

Stanisław Borkowski, Paweł Szklarzyk, Krzysztof Knop 125-130 M201423

14 2 Abrasive Wear Resistance of Wood Milan Brožek 130-136 M20142414 2 On the Modelling of Contact Forces in the Framework of Rigid Body Dynamics Radek Bulin, Michal Hajzman 136-141 M201425

14 2 Analysis of Simple Mechanism Using MSC Adams Ingrid Delyová, Darina Hroncová, Peter Frankovský 141-145 M201426

14 2 Method for Determining of the Anti-adhesion Ability of Cutting Fluids Andrey Dugin, Jan Jersak, Alexey Popov 145-149 M20142714 2 Method for Determining the Tribological Properties of the Cutting Fluid Andrey Dugin, Jaroslav Votocek, Alexey Popov 149-153 M201428

14 2 3D Simulation of Vibrating Diamond Grinding Anatoly Grabchenko, Vladimir Fedorovich, Ivan Pyzhov, János Kundrák 153-160 M201429

14 2 Identification of Intermetallic Phases in the Alloy AlSi6Cu4 Marko Grzincic, Ivan Lukac 160-166 M20143014 2 Monitoring the Air Quality in Conventional Wet Machining Julia Hricova, Erika Sujova, Petra Semanova 166-172 M201431

14 2 Recycling Process of the Aluminium Cans as an Element of the SustainableDevelopment Concept Manuela Ingaldi, Stanisław Borkowski 172-178 M201432

14 2 Evaluation of Surface Milling Strategies Using Selected Elements of Machined Shapes of Forging Die Cavities

Peter Izol, Michal Fabian, Melichar Kopas, Gabriel Fedorko, Jana Fabianova 178-185 M201433

14 2 R-Test Static Measurement of The 5-axis CNC Machining Centre Rotary AxisKinematic Centre Error

Jerzy Jozwik, Paweł Lonkwic, Milan Saga, Ivan Kuric 186-193 M201434

14 2 Surface Integrity at Reaming Operation by MT3 Head Karel Kouril, Robert Cep, Adam Janasek, Antonin Kriz, Dana Stancekova 193-199 M201435

14 2 Capacitor Discharge Welding of Aluminium Studs Tomáš Kramár, Ladislav Kolařík, Marie Kolaříková, Martin Sahul, David Pospíšil 199-206 M201436

14 2 A Method for Planning the Cutting Ability of CBN Tools Janos Kundrak, Laszlo Raczkovi, Karoly Gyani, Istvan Deszpoth 206-213 M201437

14 2 Prediction of Surface Product Quality and Operation Reliability of Grinding Machines Imrich Lukovics, Jiří Čop, Ladislav Fojtl, Petr Lukovics, Vladimír Pata 213-217 M201438

14 2 The Use of the Matrix Model of Sustainable Development (MSD) in the Production Sector Karel Macik, Theodor Beran, Sarka Findova 217-222 M20143914 2 Monitoring Methods the Properties and Structure of Grey Iron Castings Iva Nova, Jiri Machuta 223-228 M20144014 2 Applied Load and Calibration of the Hardness Tester Jozef Petrik, Marek Solc, Vojtech Miklos 228-234 M201441

14 2 Advantages of Express-Methods in Investigation of Mechanical and Physical Properties of Aluminum Alloys

Maxim Puchnin, Evgeniy Anisimov, Jiří Cejp, Igor Kunka, Sébastien Vicens 234-238 M201442

14 2 Microstructure and Properties of Magnesium Alloys Working at Elevated Temperatures Jan Serak, Milena Voderova, Dalibor Vojtech, Pavel Novak 238-244 M201443

14 2 Method of immediately cutting process stoppage Karol Vasilko, Zuzana Murčinková 245-252 M201444

14 3 The Use of Optical Microscopy to Evaluate the Tribological Properties Totka Bakalova, Petr Louda, Lukáš Voleský, Zuzana Andršová 256-261 M201445

14 3 Metallography Evaluation of IN 718 after Applied Heat Treatment Juraj Belan, Lenka Hurtalová, Alan Vaško, Eva Tillová 262-267 M201446

14 3 Analysis of HVOF Coating on Molds Used for Refractory Fireclay Shapes Libor Beranek, Jiri Kyncl, Petr Mikes 267-271 M201447

Man

ufac

turin

g Te

chno

logy

June

201

4


article


ISSN 1213‐2489

14 3 Characterization of Porous Magnesium Prepared by Powder metallurgy - Influence ofPowder Shape Jaroslav Čapek, Dalibor Vojtěch 271-275 M201448

14 3 Identification of Stress and Structure Properties in Surface and Subsurface Layers ofNuclea Reactor Austenitic Steel

Andrej Czán, Anton Martikáň, Jozef Holubják, Jozef Struhárňansky 276-281 M201449

14 3 Ultrasonic Testing of Girth Welded Joint with TOFD and Phased Array Daniel Dopjera, Radoslav Koňár, Miloš Mičian 281-286 M201450

14 3 Temperature Dependence of the Internal Friction Measured at Different ExcitationVoltages Zuzana Dresslerová, Peter Palček 287-290 M201451

14 3 Effect of Cutting Fluids on the Tool Life in Turning and Milling of Construction Steel Andrey Dugin, Lukas Volesky 290-296 M201452

14 3 Non-destructive Magnetic Evaluation of Ground Surfaces Made of Bearing Steel ofVariable Hardness

Zuzana Durstová, Branislav Mičieta, Mária Čilliková, Miroslav Neslušan, Jozef Mrázik 297-303 M201453

14 3 Preparation of Magnesium-zinc Alloy by Mechanical Alloying Michaela Fousova, Jaroslav Capek, Dalibor Vojtech 304-309 M201454

14 3 Coating Surface Roughness Measurement Made On Coining DiesTomáš Hanes, Pavol Hvizdoš, Miroslava Ťavodová, Daniela Kalincová, Júlia Hricová, Pavel Beňo

309-317 M201455

14 3 Measurement of Wear Metals in Engine Oils by Atomic Absorption SpektrometryMethod

Vladimír Hönig, Daniela Miholová, Matyáš Orsák 317-322 M201456

14 3 Application of Discriminant Analysis in Monitoring the Wear Particles in the EngineOil

Vladimír Hönig, Luboš Smrčka, Štěpánka Horníčková 322-326 M201457

14 3 Microstructure Control of Secondary A 231 Cast Alloy Used in Automotive Industry Lenka Hurtalová, Eva Tillová, Mária Chalupová, Juraj Belan, Alan Vaško 326-333 M201458

14 3 The Usage of Backscattered Electrons in Scanning Electron Microscopy Pavel Kejzlar, Martin Švec, Eva Macajová 333-336 M201459

14 3 Defect Detection in Pipelines during Operation Using Magnetic Flux Leakage andPhased Array Ultrasonic Method Radoslav Konar, Milos Mician, Ivo Hlavaty 337-341 M201460

14 3 Preparation and Characterization of NiTi Shape Memory Alloy Preparedby PowderMetallurgy

Vojtěch Kučera, Jaroslav Čapek, Alena Michalcová, Dalibor Vojtěch 342-347 M201461

14 3 Analysis of the Defects Causes in Rolled Brass Sheet Sylvia Kuśmierczak, Nataša Náprstková, Michal Kuba 347-351 M201462

14 3 Evaluation of Composite Structures by Light Microscopy and Image Analysis Lenka Markovicova, Lenka Hurtalova, Viera Zatkalikova, Tomasz Garbacz 351-355 M201463

14 3 Microstructure Analysis of Welded Joints after Laser Welding Jozef Meško, Andrej Zrak, Krystian Mulczyk, Szymon Tofil 355-359 M201464

14 3 Structural Description of Powder Metallurgy Prepared Materials Alena Michalcová, Dalibor Vojtěch, Tomáš František Kubatík, Pavel Novák, Petr Dvořák 359-362 M201465

14 3 Material Research of a Decorative Bronze Circle from the Hallstatt Culture Period Šárka Msallamová, Jiří Kmošek, Alena Michalcová 362-366 M201466

14 3 Abrasive-free Ultrasonic Finishing of Metals Miroslav Müller, Lebedev Anatolii, Svobodová Jaroslava, Náprsková Nataša, Lebedev Pavel 366-370 M201467

14 3 Setting of Causes of Adhesive Bonds Destruction by Means of Optical Analysis Miroslav Müller 371-375 M2014682014

Tech

nolo

gy


article


ISSN 1213‐2489

14 3 The Effect of Asymmetry on Vertical Dynamic Response of Railway Vehicles Fillemon Nangolo, Josef Soukup 375-380 M201469

14 3 Monitoring of the Structure and Quality of Aluminium Castings in Moulds of Gypsum Mixtures Iva Nová, Jiří Machuta 381-387 M201470

14 3 Application of Microscopy and X-ray Diffraction in Optimization of the Production of NiTi Alloy by Powder Metallurgy

Pavel Novák, Andrea Školáková, Vladimír Vojtěch, Anna Knaislová, Petr Pokorný, Hynek Moravec, Jaromír Kopeček, MiroslavKarlík, Tomáš František Kubatík

387-392 M201471

14 3 Analysis of Aluminium Alloys AlSi7Mg0.3 and AlMg3 by Means of X-Ray Diffraction Jan Novotný, Jaromír Cais, Nataša Náprstková 392-397 M20147214 3 Effect of Low Pressure Application during Solidification on Microstructure of AlSi Alloys Richard Pastirčák 397-402 M201473

14 3 Non-destructive Testing of Split Sleeve Welds by the Ultrasonic TOFD Method Marek Patek, Radoslav Konar, Augustin Sladek, Norbert Radek 403-407 M201474

14 3 Setting of Angle of Soil Flow on Ploughshare at Traditional Processing of Soil Stanislav Petrásek, Miroslav Müller 407-412 M201475

14 3 Microstructure Evolution of Al-Mn-Si-Fe Alloy Studied by In-situ Transmission Electron Microscopy Michaela Poková, Miroslav Cieslar 412-417 M201476

14 3 Effect of Extrusion on Mechanical Properties and Structures of Zn-Mg Alloys for Biomedical Applications Iva Pospíšilová, Dalibor Vojtěch 417-421 M201477

14 3 Structure and Properties of Zn-Mg Alloys for Medical Implants Iva Pospisilova, Dalibor Vojtech, Jiri Kubasek 422-427 M201478

14 3 Technology of Laser Forming Norbert Radek, Jozef Meško, Andrej Zrak 428-431 M20147914 3 Efect of Selected Elements on the Microstructure of Secondary Al-Si Alloys Lukáš Richtárech, Dana Bolibruchová 431-437 M201480

14 3 Production of Al-Si-Fe-X alloys by Powder Metallurgy Andrea Školáková, Pavel Novák, Dalibor Vojtěch, Tomáš František Kubatík 437-441 M201481

14 3 Application of Mesh-free Methods in Transient Dynamic Analysis of Orthotropic Plates Josef Soukup, Milan Žmindák, Jan Skočilas, Lenka Rychlíková 441-447 M201482

14 3 Monitoring of Precipitation Process in AZ31 and AZ91 Magnesium Alloys by Internal Damping Measurement

Andrea Soviarová, Peter Palček, Zuzanka Trojanová 447-451 M201483

14 3 Heat-Affected Zone of Plasma of Laser Cut Materials Dana Stancekova, Jan Semcer, Michal Sajgalik, Miroslav Janota 451-456 M201484

14 3 The Effect of Niobium Addition and Heat Treatment on the Phase Structure of Fe3Al – Type Intermetallic Alloys Martin Švec, Věra Vodičková 456-461 M201485

14 3 SEM and EDS Analysis Used in Evaluation of Chemical Pre-treatment Based on Jaroslava Svobodova 461-467 M201486

14 3 Change of Internal Friction on Aluminium Alloy with 10.1 % Mg Dependence on the Temperature

Milan Uhríčik, Peter Palček, Andrea Soviarová, Przemysław Snopiński 467-470 M201487

14 3 Analysis of Surface Integrity of Parts after Non-conventional Methods of Machining Alena Vajdová, Anna Mičietová, Miroslav Neslušan, Kamil Kolařik 470-474 M201488

14 3 Picture Analysis of Failure Areas of Particle Composites Petr Valášek, Miroslav Müller 474-478 M201489

14 3 Quantitative Evaluation of Microstructure of Graphitic Cast Irons Alan Vaško, Lenka Markovičová, Viera Zatkalíková, Eva Tillová 478-482 M201490

Oct

ober

2

Man

ufac

turin

g T


article


ISSN 1213‐2489

14 3 Structure and Mechanical Properties of Mg-Based Alloys for Elevated Temperature Applications

Dalibor Vojtěch, Jiří Kubásek, Milena Voděrová, Jan Šerák 482-487 M201491

14 3 New Inspection Technologies for Identification of Failure in the Materials and Welded Joints for Area of Gas Industry Peter Vrzgula, Martin Faturík, Miloš Mičian 487-492 M201492

14 3 Variability of Local Corrosion Attack Morphology of AISI 316Ti Stainless Steel in Aggressive Chloride Environment

Viera Zatkalíková, Lenka Markovičová, Juraj Belan, Tatiana Liptáková 493-497 M201493

14 3 Vanadium and Chromium Impact to Microstructure of AlSi10MgMn Alloy with Elevated Iron Content Maria Zihalova, Dana Bolibruchova 498-502 M201494

14 4 Micro CT Analysis of Geopolymer Composites Totka Bakalova, Marcela Kolínová, Petr Louda 505-510 M201495

14 4 Influence of Preheating and Heat Treatment after Welding According to the EN 13445and ASME Code on the Hardness Level of Welded Joints for the Pressure Vessel Plates

Libor Beneš, Tomas Kolegar, Martin Tojmar, Petr Majrich 511-516 M201496

14 4 CNC Milling and Manufacturing of Groove Shapes for Light Reflection Measurement Ondrej Bilek, Martin Vasina 516-522 M20149714 4 Working Variables Optimization of Resistance Spot Welding Milan Brožek 522-527 M201498

14 4 Study of Surface Quality after Turning of Steel AISI 304 Ján Duplák, Jozef Zajac, Michal Hatala, Dušan Mitaľ, Miroslav Kormoš 527-532 M201499

14 4 Ecological Production of Cores - Example from Automotive Branch Marko Grzinčič, Petr Hlavsa 532-539 M2014100

14 4 Usage of Track Link Dynamic Motion Simulation Chalupa Milan, Veverka Josef, Vlach Radek 540-544 M2014101

14 4 Improvements of the Dressing Process of Super Abrasive Diamond Grinding WheelsJanos Kundrák, Vladimir Fedorovich, Angelos P. Markopoulos, Ivan Pyzhov, Natalya Kryukova

545-554 M2014102

14 4 Tests of Drills during Drilling Holes into Alloy WheelsLadislav Kyncl, Marek Sadílek, Robert Čep, Jana Petrů, Dana Stancekova, Josef Procházka, Pavel Nováček

554-561 M2014103

14 4 The Issue of Calculating Elliptic Trajectories Alexander Lozhkin, Ivan Abramov, Pavol Bozek, Yuri Nikitin 561-566 M2014104

14 4 A Method of Carbon Footprint Calculation for the Product Life Cycle Qinyi Ma, Qingchao, Yanqiu Liu, Yajun Wang, and Maojun Zhou 56-572 M2014105

14 4 Identification of Internal Residual Stress of Steel after Milling by Ultrasound Dusan Mital, Jozef Zajac, Michal Hatala, Peter Michalik, Jan Duplak 573-578 M2014106

14 4 Optimization of Surface Treatment of Carbon Steel in Area of Adhesive BondingTechnology with Application of Quik-Setting Adhesives Miroslav Müller, Petr Valášek 579-584 M2014107

14 4 Application of Cooling by Liquid CO2 for the Die Casting Moulds Cores Iva Novakova, Martin Seidl, Pavel Brdlik, Iva Nova, Jaromir Moravec 585-590 M2014108

14 4 The Effect of Thermal Shocks on Wear of Exchangeable Sintered Carbide Insertsduring the Cutting Process

Jana Petru, Tomas Zlamal, Ivan Mrkvica, Robert Cep 590-596 M2014109

14 4 3D Measurement of Surface Texture Parameters Jan Podaný, Alexey Molotovnik 596-600 M2014110

Dec

embe

r 201

4


article


ISSN 1213‐2489

14 4 Dynamics Analysis and Simulation of Roll Grinder Components Yuan Qingni, Lu Jian, Pan Weiji, Yuan Qingyun 600-607 M2014111

14 4 Design of Material Composition and Technology Verification for Composite Front End Cabs Sona Rusnakova, Ladislav Fojtl, Milan Zaludek, Vladimir Rusnak 607-611 M2014112

14 4 Introduction to Processing of CT Clinical Metadata of Disabled Part of Patient KneeJoint

Josef Sedlak, Josef Chladil, Martin Slany, Karel Kouril 611-618 M2014113

14 4 Sprinkback Research of V-type Sheet Metal forming based on the Adjustable Drawbead and Variable Blank-holder Force Cooperative Control Technology Chunjian Su, Xuetao Wang 618-625 M2014114

14 4 Study on Springback Rule of AZ31B Magnesium Alloy Axisymmetric Part’s Warm Single Point Incremental Forming without Mould Chunjian Su, Tiantian Li 626-632 M2014115

14 4 Mechanical Properties of Epoxy Resins Filled with Waste Rubber Powder Petr Valášek 632-637 M2014116

14 4 Study on Q245 Steel fatigue crack growth behaviors at high temperature Haibo Wang, Dongpo Wang, Fangjie Cheng, Caiyan Deng, Yunlong Wu 637-643 M2014117

14 4 Dynamic Analysis for High-speed Cutters of Five-axis CNC Milling Machine Jianmin Xu,Lizhi Gu,Shanming Luo 643-650 M2014118

14 4 Design and Calculation of Multi-angel and Stepping Transmission of Sucker Rod Forging Liu Yimin, Wang Jie 650-657 M2014119

14 4 Principles of Cutting Process Modelling and New Algorithm Proposal Pavel Zeman, Jaroslav Kovalčík, Martin Vrabec 658-664 M2014120

14 4 An Evaluation of Changeability of Parameters Describing Abbot Curve during a Wavelet Decomposition Process

Jozef Zajac, Włodzimierz Makieła, Krzysztof Stępień, Damian Gogolewski 665-671 M2014121

Title Volume YearNumb

erArticle title Author(s) pages

No. ofarticle

13 1 Study of advanced Ni – base ŽS6K alloy by quantitative metallography methods Juraj Belan 2-7 M201301

13 1 Influencing the crystallization of secondary alloy AlSi6Cu4 with strontium Dana Bolibruchová, Marek Brůna 7-14 M201302

13 1 Study of the gas content in aluminum alloys Dana Bolibruchová, Lukáš Richtárech 14-20 M201303

13 1 The Simulation of Influence of Quenching Temperature on Properties of Bearing RingsMartin Brezničan, Peter Fabian, Jozef Meško, MárioDrbúl

20-25 M201304

13 1 Complex evaluation of porosity in A356 aluminium alloy using advanced porosity module Marek Brůna, Lukáš Kucharčík, Augustín Sládek 26-30 M201305

13 1 Influence of repeated remelting of the alloy RR.350 on structure and thermo-mechanical propertiesMarek Břuska, Petr Lichý, Michal Cagala, JaroslavBeňo

31-35 M201306

13 1 Influence of returning material on porosity of die castingsĽubomír Eperješi, Jozef Malik, Štefan Eperješi, DanielFecko

36-39 M201307

13 1Using of Thermal Analysis in the Industrial Practice-Consumption Reduction of Grain-RefinementMaster Alloy and Optimization of Computer Simulation Results

Marko Grzincic, Mile Djurdjevic, Florian Dirnberger 39-43 M201308

13 1Elimination of the negative effect of Fe-rich intermetallic phases in secondary (recycled) aluminium cast alloy

Lenka Hurtalová, Eva Tillová 44-50 M201309

13 1Impact Analysis of Mutual Rotation of Roller Bearing Rings on the Process of Contact Stresses inRolling Elements

Lenka Jakubovičová, Milan Sága, Milan Vaško 50-54 M201310

13 1 Experimental evaluation of the new lance for powder injection Jan Jezierski, Krzysztof Janerka 55-59 M201311

13 1In-phase multiaxial fatigue experimental analysis of welded cylindrical 6063-T66 aluminium alloy specimens

Peter Kopas, Milan Sága 59-64 M201312

13 1Inoculant Addition Effect on Thermomechanical and Thermophysical Properties of Mg-Sr MagnesiumAlloy

Petr Lichý, Jaroslav Beňo, Michal Cagala 64-67 M201313

13 1 Modified hydrated sodium silicate as a modern binder for ecological moulding sandsKatarzyna Major-Gabryś, Stanisław M. Dobosz, Jarosław Jakubski

68-73 M201314

13 1 Squeeze casting results of aluminium alloys Iva Nová, Jiří Machuta 73-79 M201315

13 1 Finite Element Implementation of Multi-Pass Fillet Weld with Phase Changes Pavol Novák, Jozef Meško, Milan Žmindák 79-85 M201316

13 1Metallurgical and Material Properties of Castings Manufactured from Stainless G-X4CrNi13-4 and G- X4CrNiCu13-4

Josef Odehnal, Stanislav Brotánek 85-91 M201317

13 1Effect of opening material granularity on the mould properties and the quality of castings made by patternless process technology

Richard Pastirčák, Emil Krivoš 92-97 M201318

13 1 Temperature gradient in cooling down Fe-C-Cr alloy casting Andrzej Studnicki, Jan Szajnar 98-103 M201319

13 1 The zone without carbon in alloy layer obtained on steel cast Jan Szajnar, Agnieszka Walasek, Czesław Baron 103-108 M201320

13 1 The role of antimony in modifying of Al-Si-Cu cast alloy Eva Tillová, Mária Farkašová, Mária Chalupová 109-114 M201321

13 1 Influence of heat treatment on the microstructure of synthetic nodular část iron Alan Vaško 115-119 M201322

13 1 Hardness of Ductile Cast Iron Castings and its Control in Praxis Iveta Vasková, Peter Šebek, Igor Muli 120-122 M201323

13 1Assessment of the effect of temperature and annealing time homogenization AlCu4MgMn alloys in terms of microstructure image analysis methods and EDX

Viktorie Weiss, Ingrid Kvapilova 123-127 M201324

13 1 The Efficiency of Different Types of Inoculation of Pure Al and AlSi2 Alloy Tomasz Wróbel 127-133 M201325

13 2 Properties of Briquettes from Paper Waste Milan Brozek 138-142 M201326

13 2 Hard Machinable Machining of Cobalt-based SuperalloyRobert Cep, Adam Janasek, Jana Petru, Lenka Cepova, Andrej Czan, Jan Valicek

142-147 M201327

13 2 CRM as a competitive advantage Helena Čierna, Lucia Bárdošová 147-152 M201328

Articles ListManufacturing Technology | Voume 13

ISSN 1213-2489

Man

ufa

ctu

ring

Tec

hn

olo

gy

Mar

ch 2

013



No. ofarticle


ISSN 1213-2489

13 2 Nondestructive micromagnetic evaluation of surface damage after grindingMária Čilliková, Marián Mičúch, Miroslav Neslušan, Anna Mičietová

152-157 M201329

13 2Postprocessing of CL Data in CAD/CAM system Edgecam using the Constructor of postprocessors

Nadežda Čuboňová 158-164 M201330

13 2Application of Electron Scanning Microscope in the Analysis of the Structure of Casting Non-Conformities Aimed at Optimization of Technological Process Parameters

Czajkowska Agnieszka, Kossakowski Paweł, Wciślik Wiktor, Stasiak-Betlejewska Renata

164-169 M201331

13 2Increasing the accuracy of the effect of processing materials and cutting tool wear on the ploughing force values

Andrey Dugin, Alexey Popov 169-173 M201332

13 2 The GIST of Thermal Stresses of Cast Iron CastingsPeter Futáš, Imrich Jelč, Iveta Vasková, Gabriel Fedorko, Vieroslav Molnár, Peter Kačmáry

173-178 M201333

13 2 Possibilities of prediction of service life of forming toolsJiří Hrubý, Josef Rentka, Vladimíra Schindlerová, Lucie Krejčí, Xenie Ševčíková

178-181 M201334

13 2 Welding of Normalized Heat Treated Steels S355NL Large Thicknesses by Method FCAWMarie Kolaříková, Ladislav Kolařík, Karel Kovanda, Rudolf Hrabina

181-188 M201335

13 2 Surface Integrity in Notches MachiningJan Madl, Vitezslav Razek, Vaclav Koutny, Jindrich Kafka

188-193 M201336

13 2Artificial Neural Network Application for Surface Roughness Prediction when Drilling Nickel Based Alloy

Ildikó Maňková, Marek Vrabeľ, Pavel Kovac 193-199 M201337

13 2Influence of surface geometry and structure after non-conventional methods of parting on the following milling operations

Anna Mičietová, Miroslav Neslušan, Mária Čilliková

199-204 M201338

13 2 Comparison of variables influence on adhesive bonds strength calculations Miroslav Müller, Petr Valášek 205-210 M201339

13 2 Differences at the Surface Roughness by the ELID and Grinding Technology Martin Novak, Hiroshi Kasuga, Hitoshi Ohmori 210-215 M201340

13 2Using of the Virtual Reality Application with the Scanning Device Kinect for Manufacturing Processes Planning

Jozef Novak-Marcincin, Veronika Fecova, Jozef Barna, Miroslav Janak, Ludmila Novakova-Marcincinova

215-219 M201341

13 2 Selected Experimental Tests of Materials Used in Rapid Prototyping AreaLudmila Novakova-Marcincinova, Jozef Novak-Marcincin, Jozef Torok, Jozef Barna

220-226 M201342

13 2 Development and applications of a rotating turning tool Jozef Pilc, Karol Vasilko 226-231 M20134313 2 Tool Wear and Machinability of Wood-based Materials during Machining Process Eva Šebelová, Josef Chladil 231-236 M201344

13 2The surface quality of materials after cutting by abrasive water jet evaluated by selected methods

Miroslava Ťavodová 236-241 M201345

13 2 Polyurethane resins filled with inorganic waste particles Petr Valášek, Miroslav Müller 241-247 M20134613 2 Analysis of geometric accuracy of turned workpieces Karol Vasilko, Zuzana Murčinková 247-252 M201347

Ma

nu

fact

uri

ng

Te

chn

olo

gy

June

201

3



No. ofarticle


ISSN 1213-2489

13 3Influence of chemical composition, form and morphology of surface of NaCl grains on mechanical properties of water soluble cores

Eliška Adámková, Petr Jelínek, Soňa Študentová 255-261 M201348

13 3 Production and properties of metal foams from non-ferrous metals alloysVlasta Bednářová, Petr Lichý, Tomáš Elbel, Ivo Lána

261-265 M201349

13 3 Study of interactions between molding materials and magnesium alloys melt metalJaroslav Beňo, Petr Lichý, Michal Cagala, Kateřina Konečná, Marek Břuska

265-269 M201350

13 3 Offline Programming for Robotic Deburring Process of Aluminium Wheels Ondrej Bilek, David Samek, Jana Knedlová 269-275 M20135113 3 Effect of adding iron to the AlSi7Mg0.3 (EN AC 42 100, A356) alloy Dana Bolibruchová, Lukáš Richtárech 276-281 M20135213 3 Effect of Germanium on Secondary Lead-free Tin Solders Dana Bolibruchová, Marek Brůna 281-289 M20135313 3 Possibilities of iron elimination in aluminium alloys by vanadium Dana Bolibruchová, Mária Žihalová 289-296 M20135413 3 Prediction of the Porosity of Al Alloys Marek Brůna, Lukáš Kucharčík 296-302 M201355

13 3Using the Design of Experiment Method to Evaluate Quality of Cuts after Cutting Aluminum Alloy by AWJ

Helena Čierna, Miroslava Ťavodová 302-307 M201356

13 3 Fracture surface of recycled AlSi10Mg cast alloy Mária Farkašová, Eva Tillová, Mária Chalupová 307-313 M201357

13 3 Plastic Deformation Properties of Magnesium Alloy AZ61Ivana Hlaváčová, Peter Palček, Mária Chalupová, Zuzana Dresslerová

313-319 M201358

13 3 The Influence of Porosity on Mechanical Properties of Casts Produced from Al - Si Alloys Radek Honzátko, Štefan Michna, Jaromír Cais 319-324 M201359

13 3 Influence of Cutting Tool Material on the Surface Roughness of AlMgSi Aluminium Alloy Júlia Hricová 324-329 M201360

13 3 Porous Ti-Si Alloys for ImplantsAnna Knaislová, Matyáš Peterka, Pavel Novák, Dalibor Vojtěch

330-333 M201361

13 3Mechanical and corrosion properties of Mg based alloys considered for medical applications as biodegradable materials

Jiří Kubásek, Dalibor Vojtěch 334-341 M201362

13 3 Possibility of affecting the casting structure of magnesium alloys Petr Lichý, Jaroslav Beňo, Michal Cagala 341-345 M20136313 3 Evaluation of vibration on technological devices Petr Lukovics 345-349 M20136413 3 The Effect of Chemical Elements on the Machinability of Aluminium Alloys Jan Madl, Ludek Ruzicka, Michal Lattner 349-353 M201365

13 3 Properties of metallic nanocrystalline powders Ivo Marek, Alena Michalcova, Dalibor Vojtech 353-358M201366

13 3 Preparation of Metallic NanoparticlesAlena Michalcová, Dalibor Vojtěch, Ivo Marek, Petra Svobodová, Radka Nováková

358-361 M201367

13 3Analysis of Causes of Al2MgO4-Type Spinel Inclusions Formation in Al-Mg Alloys during Low-Pressure Casting

Štefan Michna, Radek Honzátko, Jaromír Cais 361-368 M201368

13 3 Influence of strontium in AlSi7Mg0.3 alloy on the tool wearNataša Náprstková, Jaroslava Svobodová, Jaromír Cais

368-373 M201369

13 3 Modification of AlSi7Mg0.3 alloy by strontiumNataša Náprstková, Sylvia Kuśmierczak, Jaromír Cais

373-380 M201370

Sept

embe

r 20

13

Ma

nu

fact

uri

ng

Tec

hn

olo

gy



No. ofarticle


ISSN 1213-2489

13 3 The Effect of Modification by Strontium of the AlSi7Mg0.3 Alloy on the Surface RoughnessNataša Náprstková, Jaromír Cais, Jaroslava Svobodová

380-384 M201371

13 3Monitoring of the microstructure and mechanical properties of the magnesium alloy used for steering wheel manufacturing

Iva Nová, Jiří Machuta 385-390 M201372

13 3 Preparation of aluminium-based quasicrystalsPavel Novák, Milena Voděrová, Robin Hendrych, Tomáš Kubatík, Alena Michalcová, Dalibor Vojtěch

390-394 M201373

13 3 Magnesium Alloys for Implants Pavel Salvetr, Pavel Novák, Dalibor Vojtěch 395-399 M201374

13 3 Coefficient Thermal Expansion of Fe 3Al and FeAl – type iron aluminides Martin Švec, Pavel Hanus, Věra Vodičková 399-404 M201375

13 3 Research of Corrosion Properties of Al-Si Alloys Antimony AlloyedJaroslava Svobodová, Jaromír Cais, Štefan Michna, Martin Brůha

404-409 M201376

13 3 Corrosion properties of the superelastic shape memory Ni-Ti alloy for medical implants Dalibor Vojtěch, Jiří Kubásek, Pavel Novák 409-414 M201377

13 4Optimization of Adhesive Layer Thickness at Metal Bonding Using Quick-SettingAdhesives

Milan Brožek 419-423 M201378

13 4 An Experimental Assessment of Special Metal Castings in Reducing Abrasive Wear Jiří Cieslar, Milan Brožek, Bohumír Bednář 423-428 M201379

13 4Studying of Cutting Zone When Finishing Titanium Alloy by Application ofMultifunction Measuring Systém

Andrej Czán, Michal Sajgalík, Jozef Holubjak, Karel Kouril

428-431 M201380

13 4 The Methodology of Quality Matrix in Manufacturing Quality Process Improvement Milan Dian 431-437 M201381

13 4Manufacturing of Femoral Heads from Ti-6Al-4V Alloy with High Speed Machining:3D Finite Element Modelling and Experimental Validation

N.I. Galanis, A.P. Markopoulos, I.D. Giannakopoulos, D.E. Manolakos

437-444 M201382

13 4The Test Stand Load Modulus Implementation for the Realistic Railway Operation inthe Laboratory Conditions

Juraj Gerlici, Tomáš Lack, Jozef Harušinec 444-449 M201383

13 4Developing Superplasticity in A AZ91 Magnesium Alloy Through a Combination ofRolling, ARB and ECAP

Miroslav Greger, David Žáček 450-454 M201384

13 4 Optimization of the Solution Annealing Treatment of the AlSi10Mg(Cu) Alloy Marko Grzinčič, Ivan Lukáč 455-458 M201385

13 4 Evaluation of Machining Strategies for Production of Free Form Surfaces Using 3-Axle MillingPeter Ižol, Michal Fabian, Melichar Kopas, Gabriel Fedorko

458-465 M201386

13 4The Influence of Process Fluids on the Properties of the Surface Layer of MachinedComponents

Jan Jersák, Lucie Vrkoslavová 466-473 M201387

13 4 The Machinability of Duplex Stainless Steel – Solutions in Practice Grzegorz Krolczyk, Stanisław Legutko 473-478 M201388

13 4Utilization of Advanced Simulation Methods for Solving of Assembly ProcessesAutomation Partial Tasks

Darina Kumičáková, Filip Górsk, Andrzej Milecki, Damian Grajewski

478-486 M201389



No. ofarticle


ISSN 1213-2489

13 4The FASTSIM Method Modification to Speed up the Calculation of Tangential Contact Stresses between Wheel and Rail

Tomáš Lack, Juraj Gerlici 486-492 M201390

13 4Application of Taguchi Method and Surface Response Methodology to Evaluate OfMathematical Models to Chip Deformation when Drilling With Coated and UncoatedTwist Drills

Ildikó Maňková, Marek Vrabeľ, Jozef Beňo, Pavel Kovac, Marin Gostimirovic

492-499 M201391

13 4 Cutting Forces by Turning of Inconel 718 with Inserts from Different MaterialsIvan Mrkvica, Miroslav Neslušan, Ryszard Konderla, Jozef Jurko, Anton Panda

499-504 M201392

13 4Research of Renovation Possibility of Machine Tools Damage by Adhesive BondingTechnology

Miroslav Müller 504-509 M201393

13 4 Influence Ceramic Powder SiC Moisture during Green Machining Imrich Orlovský, Michal Hatala, JánDuplák 509-515 M20139413 4 Utilization of Multibody Simulations at the Trolleybus Development Pavel Polach 515-520 M201395

13 4The Affect of Input Factors on the Optimisation of Cutting Conditions and Production Costs in Turning with Cutting Inserts

Ludek Ruzicka, Jan Madl 520-526 M201396

13 4 Influence of Laser Welding Aluminium Alloy on Mechanical Properties of Welded JointsMiroslav Sahul, Milan Turňa, Jana Šugárová, Martin Sahul

526-530 M201397

13 4 Passive Seat Suspension With a Vibration Absorber Štefan Segľa, Martin Orečný, Nataša Trišović 530-534 M201398

13 4 Semiactive Seat Suspension With a Vibration Absorber Štefan Segľa, Martin Orečný, Nataša Trišović 534-539 M201399

13 4Using of Barkhausen Noise Analysis and X-Ray Diffraction for Evaluation Of SurfaceIntegrity

Schmidová Lucie, Bakalova Totka, Malec Jiří 539-542 M2013100

13 4 Simulation of Liquid Flow in Pipe Blanka Skočilasová, Jan Skočilas 542-547 M2013101

13 4Methods of Measuring of Residual Stresses and Evaluation of Residual State of Functional Surfaces by X-Ray Diffractometric Methods

Dana Stančeková, Ján Šemcer, Michal Derbas, Tomáš Kurňava

547-552 M2013102

13 4 Dynamic Measurement of Four-Axle Railway Wagon Martin Svoboda, Josef Soukup 552-558 M2013103

13 4Verification of Numeric Solution by Experiment for Examination Vertical Oscillation of a Mechanical Systém

Martin Svoboda, Josef Soukup 559-563 M2013104

13 4 Changes of Polyurethane Mechanical Properties Filled with Glass Powder Petr Valášek, Miroslav Müller 563-568 M201310513 4 Realistic Dependence T-vc for Recent Cutting Materials Karol Vasilko, Ján Duplák 568-571 M201310613 4 New Technological Knowledge of the Rotary Turning Tool Karol Vasilko, Jozef Pilc 571-575 M2013107

13 4 Compacting of Aluminium Alloys Prepared by Melt Spinning Method Milena Voděrová, Pavel Novák, Dalibor Vojtěch 575-580 M2013108

13 4The Influence of Human Motivation Factors on the Successful Implementation of Product Life Cycle Management bTools: Explorative Findings and Managerial Implications

Bernd Markus Zunk, Julia Soos, Iris Uitz, Andrea Denger, Michael Bader

580-586 M2013109

Dec

embe

r 20

13

Ma

nu

fact

uri

ng

Tec

hn

olo

gy



No. ofarticle

12 12Utilization of Open Source Application in Area of Augmented Reality Assembling Processes Barna Josef, Fecova Veronika, Novak-Marcincin Jozef, Torok

Jozef2-7 M201201

12 12 CAM in the Production of Casting Patterns Bílek Ondřej, Rokyta Luboš, Šimoník Jaroslav 7-12 M201202

12 12Study of Deformation Processes after Hard Turning through Acoustic Emission Čilliková Mária, Neslušan Miroslav, Mičietová Anna, Mrázik

Jozef13-17 M201203

12 12Experimental verification of abrasive mass flow impact on the technological head acceleration amplitudeand vibrations frequency in the production system with AWJ technology

Fabian Stanislav, Salokyová Štefánia 18-21 M201204

12 12GICS for grinding process optimization Holesovsky Frantisek, Naprstkova Natasa, Novak

Martin22-26 M201205

12 12Experimental Verification of the Relation between the Surface Roughness and the Type of Used ToolCoating

Kasina Marek, Vasilko Karol 27-30 M201206

12 12Experimental Verification of FEM Simulation of GMAW Bead on Plate Welding Kovanda Karel, Holub Lukáš, Kolařík Ladislav, Kolaříková

Marie, Vondrouš Petr30-33 M201207

12 12 Productivity Investigation within the ERP Systém Kujawa Anna, Legutko Stanislaw 34-38 M201208

12 12 Laser Machining of Chosen Materials Lukovics Imrich, Malachova Martina 38-42 M201209

12 12 Impact of technical diagnostics interval on machinery maintenance Mayer Karel, Pexa Martin, Pavlů Jindřich 42-46 M201210

12 12Research into the causes cracking of aluminum alloys of Al – Cu during mechanical machining Michna Stefan, Náprstková Nataša 47-51 M201211

12 12Vibratory superpolishing of a ti alloy aerospace material with thermally treated recycled glass media

Morgan Mike, Jamal Mikdam, Benjarungroj Paul, Vaughan Steve

51-55 M201212

12 12 Abrasive wear effect on Polyethylene, Polyamide 6 and polymeric particle composites Müller Miroslav, Valášek Petr 55-59 M201213

12 12Application of Barkhausen Noise for Analysis of Surface Integrity after Hard Turning Neslušan Miroslav, Rosipal Martin, Kolařík Kamil, Ochodek

Vladislav60-65 M201214

12 12 Surfaces with high precision of roughness after grinding Novak Martin 66-70 M201215

12 12Increasing of Product Quality Produced by Rapid Prototyping Technology Novak-Marcincin Jozef, Janak Miroslav, Novakova-

Marcincinova Ludmila71-75 M201216

12 12 Application of Progressive Materials for Rapid Prototyping Technology Novakova-Marcincinova Ludmila, Janak Miroslav 75-79 M201217

12 12 Design of a Casting Die in CATIA Rokyta Luboš, Bilek Ondřej 80-82 M201218

12 12Processing engineering of large composites structures using low-pressure vacuum infusion Rusnáková Soňa, Žaludek Milan, Bakošová Dana 83-86 M201219

12 12 Two local extremes of cutting speed Vasilko Karol, Macurová Anna 86-89 M201220

12 13The use of magnetic and ultrasonic structuroscopy for inspection of ADI/AGI castings Zuzana Andršová, Břetislav Skrbek 93-97 M201221

12 13 Decomposition of form surfaces for planning of machining Jozef Beňo, Jozef Stahovec, Peter Ižol, Miroslav Tomáš 97-102M201222

12 13 Effect of the processing materials on the ploughing force values Andrey Dugin, Alexey Popov 102-105 M201223

12 13Experimental verification of the frequency spectrum of unwears and wears guidance tube on the technological head vibrations creation in the production system with AWJ technology

Stanislav Fabian, Štefánia Salokyová, Patrik Jacko 105-108 M201224


ISSN 1213-2489

Jun

e 2

01

2

Man

ufa

ctu

ring

Tec

hn

olo

gy



No. ofarticle


ISSN 1213-2489

12 13Temperature stability of the process of production of wax patterns for investment casting technology model

Aleš Herman, Marek Česal 108-112 M201225

12 13 Gas Metal Rapid Arc Welding Potential Zdeněk Hudec 113-118 M201226

12 13A Study of the Mechanical Properties of Thermally Treated Recycled Glass Media Used in VibratoryMass Finishing

Mikdam Jamal, Mike Morgan 119-124 M201227

12 13Analysis of welded joint of band-saw blade – influence of annealing process mechanical properties

Daniela Kalincová 125-131 M201228

12 13 Structure and mechanical properties of Fe-25Al-5Zr and Fe-30Al-5Zr intermetallic alloys Pavel Kejzlar 131-135 M201229

12 13 The effect of chlorhexidine on the colour and tint change of ceramic dental veneer Dorota Klimecka-Tatar, Stanisław Borkowski 136-140 M201230

12 13 Diagnosis and damage of bearings Marek Krynke, Jacek Selejdak, Stanisław Borkowski 140-144 M201231

12 13 The effect of the borehole diameter on the machining times in hard machining János Kundrák, K. Gyáni, I. Deszpoth 145-150 M201232

12 13 Microscopic Evaluation of Protective Coating by Coated Sheets after Corrosion Load Sylvia Kuśmierczak, Jaroslava Svobodová 151-157 M201233

12 13 Surface Properties in Precise and Hard Machining Jan Madl 158-166 M201234

12 13 Structure of rapidly solidified aluminium alloys Alena Michalcová, Dalibor Vojtěch 166-169 M201235

12 13Possible ways of obtaining an aluminium alloy by non--traditional waste processing of aluminium beverage containers

Štefan Michna, Petr Majrich 169-174 M201236

12 13The use of fractography in the analysis of cracking after formed workpiece blank mechanical machining from the AlCuSnBi alloy

Štefan Michna, Nataša Náprstková 174-178 M201237

12 13 Cutting ceramic by turning of nickel alloy InconelIvan Mrkvica, Miroslav Neslušan, Ryszard Konderla, Miroslav Janoš

178-186 M201238

12 13Technology of Perspective Scanning Methods for Realization of 3D Models of Manufacturing Devices

Jozef Novak-Marcincin, Jozef Torok, Jozef Barna, Ludmila Novakova-Marcincinova

186-191 M201239

12 13 G–Ratio in hardened steel grinding with different coolants Martin Novak, Roman Dolezal 192-197 M201240

12 13Possibilities of the observation of chemical reactions during the preparation of intermetallics by reactive sintering

Pavel Novák, Alena Michalcová, Ivo Marek, MilenaVoděrová, Dalibor Vojtěch

197-201 M201241

12 13Microstructure Analysis of Titanium Alloys after Deformation by means of Asymmetric IncrementalSheet Forming

Lucie Novakova, Petr Homola, Vaclav Kafka 201-206 M201242

12 13 Model of chip formation during turning in the presence of a built-up edge (BUE) Zoltán Pálmai 207-212 M201243

12 13 TEM Investigation of Precipitation in Al-Mn Alloys with Addition of Zr Michaela Poková, Miroslav Cieslar, Jacques Lacaze 212-217 M201244

12 13 Fatigue resistance of dual phase steels in presence of microstructural inhomogeneities Gejza Rosenberg, Ľuboš Juhár 217-221 M201245

12 13 Influence of microstructural heterogeneities on capacity to absorb energy of dual-phase steels Gejza Rosenberg, Iveta Sinaiová, Ľuboš Juhár 222-227 M201246

12 13 The importance of measured values number in evaluating the wear size of inserts Ludek Ruzicka, Jan Madl 227-232 M201247

12 13 Gear-Shaper Cutter with Curvilinear Side Flank Face Roman Siecla, Stanislaw Legutko 233-237 M201248

12 13 The Roundness and Microstructure of Thin-wall Bearing RingsAugustín Sládek, Peter Fabian, Richard Pastirčák, Martin Brezničan

237-241 M201249

Dec

emb

er 2

01

2

Man

ufa

ctu

ring

Tec

hn

olo

gy



No. ofarticle


ISSN 1213-2489

12 13 Value engineering as the way of quality problems solving in the steel construction management Renata Stasiak-Betlejewska 242-247 M201250

12 13The Identification of the structures new type Al-Si-Mg Ca alloys with different Ca content using of the color metallography

Elena Střihavková, Viktorie Weiss 248-251 M201251

12 13 Stress Analysis of Injection - moulded Cylindrical Parts Reinforced with Short Fibres Oldrich Suba, Libuse Sykorova, Imrich Lukovics 251-254 M201252

12 13 The effect of heat treatment on the structure of Nb and C doped Fe3Al iron aluminides Martin Švec, Věra Vodičková, Pavel Hanus 254-259 M201253

12 13Investigation of the non-uniform temperature distribution on the metallic charge length during round bars rolling process

Piotr Sygut, Konrad Laber, Stanisław Borkowski 260-263 M201254

12 13 Microscopical Evaluation of Hard Zinc Refining by AluminiumJarmila Trpčevská, Blanka Hoľková, Jana Pirošková, Mária Ferencová

264-267 M201255

12 13Influence of bonded abrasive particles size on wear of polymeric particle composites based on waste

Petr Valášek, Miroslav Müller 268-272 M201256

12 13 Polymeric particle composites with filler saturated matrix Petr Valášek, Miroslav Müller 272-276 M201257

12 13 Effective examination for obtaining relation T=f(vc) Karol Vasilko 277-281 M201258

12 13 Phenomenon of twist drill Karol Vasilko, Vladimír Simkulet 281-285 M201259

12 13Structural, mechanical and in vitro corrosion characterization of as-cast magnesium based alloys for temporary biodegradable medical implants

Dalibor Vojtěch, Jiří Kubásek, Milena Voděrová 285-292 M201260

12 13 Study of nano-crystalline metals prepared by selective chemical leachingDalibor Vojtěch, Alena Michalcová, Vítězslav Knotek, Ivo Marek

292-296 M201261

12 13Influence of the homogenization annealing on microstructure and mechanical properties of AlZn5,5Mg2,5Cu1,5 alloy

Viktorie Weiss, Elena Strihavkova 297-302 M201262



No. ofarticle

11 11 The Kaizen philosophy in the aluminium products improvement Borkowski S., Stasiak-Betlejewska R., Náprstková N. 2-5 M201101

11 11 Fatigue life and surface integrity measurements of EN S355J2 steel used in hydraulic components Čuban J., Calonius O., Pietola M., Jersák J. 5-11 M201102

11 11 Phase and structure characteristics of recycled AlZn10Si8Mg cast alloy Ďuriníková E., Tillová E. 11-17 M201103

11 11Analysis of influence of structure on mechanical properties of AlSiMg aluminium alloy processed by ECAP

Greger M., Widomská M. 17-22 M201104

11 11 Cavitation erosion resistance of the chosen aluminum alloys Jasionowski R., Podrez-Radziszewska M., Zasada D. 22-28 M201105

11 11Application of magnetic correlation analysis on the choice and correction of cutting parameters for automated manufacturing systems

Kocman K. 28-32 M201106

11 11 Alternative machining procedures of hardened steels Kundrák J. 32-39 M201107

11 11 Microstructure and Mechanical Properties of the AlSi13Mg1CuNi Alloy With Ecological Modifier Lipiński T. 40-44 M201108

11 11 Use Properties of the AlSi9Mg Alloy With Exothermical Modifier Lipiński T. 44-49 M201109

11 11Unconventional machining method for enhancing the durability of tools and strength of the specimens bonded

Makedonski A. 49-55 M201110

11 11 Surface quality of hardened steels after grinding Novák M. 55-59 M201111

11 11 Weldability problems of the technical AW7020 alloy Podrez-Radziszewska M. 59-66 M201112

11 11The impact of the cast-iron semi-finished product hardness on the surface quality after the machining process

Suchánek D., Dušák K. 66-70 M201113

11 11 Quality control of microstructure in recycled Al-Si cast alloys Tillová E., Chalupová M., Hurtalová L., Ďuriníková E. 70-76 M201114

11 11 Identification of „natural“ breaker cut during the machining of carbon steels Vasilko K. 77-84 M201115


ISSN 1213-2489

Man

ufa

ctu

ring

Tec

hn

olo

gy

Dec

emb

er 2

01

1

Articles List Manufacturing Technology Volume 15 Year...

Documents

Transcript of Articles List Manufacturing Technology Volume 15 Year...