Artemide 2009
-
Upload
yew-hock-han -
Category
Documents
-
view
233 -
download
5
description
Transcript of Artemide 2009
22000099 NNeeww PPrroodduuccttss
®
16Aqua Cil table
20Aqua Ell table
42Itis table
56Monroe table
39One Line LED, FLUtable
57Soffione 36-45 table
58Soffione 36-45stem table
36Talak LED, FLU clamp
36Talak LED, FLU table
40Tizio classic LED table
44Tolomeo classic LEDtable
46Tolomeo microin colors table
17Aqua Cil floor
21Aqua Ell floor
52Cabildo floor
59Soffione floor
37Talak LED, FLU floor
41Tizio classic LED floor
44Tolomeo classic LEDfloor
47Tolomeo with shadereading floor
64Alicudi ceiling
18Aqua Cil ceiling
53Cabildo wall
12Droplet ceiling
12Droplet miniceiling/wall
68Eurialo wall
77Kalifa wall
79Kanji wall
32Kao wall
26Logico ceilings
8Mercury ceiling
74Nur ceilings
70Pipe wall/ceiling
14Skydro ceiling
60Soffione 36-45wall/ceiling
78Square wall
38Talak LED, FLU wall
45Tolomeo classic LEDwall
49Tolomeo 7-10-12wall shade
table
floor
wall/ceiling
65Zeffiro 80-140 wall
19Aqua Cil suspension
22Aqua Ell suspension
54Cabildo suspension
69Choose suspension,mega suspension
13Droplet suspension
76Infini suspension
32Kao suspension
27Logico suspensions
6Mercury suspension
9Mercury Clustersuspension/ceiling
66Noto suspension
72Nur Gloss/mini Glosssuspension
75Nur 1618 HAL/FLUsuspension
62Pirce suspension
61Soffione 36-45suspension
67Tian Xia 2 RGBsuspension
48Tolomeo megasuspension
suspension
®
82Ariel AC large table
83Bolo classic AC table
84Bolo linen table
85Bolo linen AC table
86Dome 14 table
86Dome 14 AC table
88Illusa small/large table
88Illusa AC large table
90Jupe classic AClarge table
91Jupe linen table
91Jupe linen AC table
92Bolo linen floor
93Dome 14 floor
94Jupe linen floor
107Jupe 8-11 classic ceiling
100Dupla FLU ceiling
108Jetz wall
109Tejido 6 oval wall
95Bliss 13-26-38-50wall/ceiling
96Brick wall
97Crescent half wall
98Dupla FLU wall
102Illusa wedge wall
104Plat 17-22 ceiling/wall
106Solana recessedceiling/wall
106Solana surfaceceiling/wall
1112.5 Square strip26-37-49 wall
101Illusa strip 12 wall
1122 Square 62-96.5suspension
1132.5 Square 49-61-95suspension
110Disk 12-18 suspension
118Equilateral suspension
114Peak suspension
table
floor
wall/ceiling
wall/ceilingADA
strip lights& mirrors
109Tejido 6 round wall
103Illusa square 18ceiling/wall
97Crescent full wall
suspension
116Rala suspension
118Scalene suspension
®
outdoor
120Dupla outdoor FLUwall/ceiling
122Lyra outdoor 11/14wall/ceiling
Artemide’s design and research teamfocuses on developing quality andlong-lasting products. Utilization ofrecyclable materials is high priority inour process of conceiving new design.
80% of our lights are energy efficientfluorescent or LED lighting.
But what’s more green than having abeautifully crafted light that continuesto function well and looks stunningdecades from now?
eco design
Ross Lovegrove Collection
“What nature does is, it drills holes in things, it liberates form,it takes away anything extraneous. That’s what I do. I makeorganic things which are essential.”
-Ross Lovegrove
6
Mercury suspensionRoss Lovegrove 2008
Mercury suspension
halogen source• 2 x 200W (R7S/T3) supplied.............
“A ceiling fixture that places a floating assembly of largepebbles below a simple modern aluminum disc. These in turnreflect each other, bouncing light between their taughtbio-morphic surfaces and reflecting the environment aroundthem. During the day, the piece acts as a sculptural objectreflecting the dynamics of natural light and movement ofpeople around them.”
- Ross Lovegrove
Cable suspended luminaire for indirect halogen lighting.
• reflective units (pebbles) made of molded thermoplasticwith polished chrome finish
• reflective units (pebbles) containing light source in die-castaluminum polished chrome finish
• disc in die-cast aluminum in pale grey finish• grey thermoplastic canopy with clear electrical cord andstainless steel cables
• mounting directly to rigid ceiling surface (hardware by others)over standard electrical junction boxes
ø 43 5/16”ø 110 cm
max 78 3/4”max 200 cm
21 11/16”55 cm
8
Mercury ceilingRoss Lovegrove 2008
Mercury ceiling
halogen source• 2 x 200W (R7S/T3) supplied.............
ø 43 5/16”ø 110 cm
21 11/16”55 cm
1 15/16”5 cm
“A ceiling fixture that places a floating assembly of largepebbles below a simple modern aluminum disc. These in turnreflect each other, bouncing light between their taughtbio-morphic surfaces and reflecting the environment aroundthem. During the day, the piece acts as a sculptural objectreflecting the dynamics of natural light and movement ofpeople around them.”
- Ross Lovegrove
Ceiling mounted luminaire for indirect halogen lighting.
• reflective units (pebbles) made of molded thermoplasticwith polished chrome finish
• reflective units (pebbles) containing light source in die-castaluminum polished chrome finish
• disc in die-cast aluminum in pale grey finish with clearelectrical cords and stainless steel cable
• mounting directly to rigid ceiling surface (hardware by others)over standard electrical junction boxes
9
Mercury ClusterRoss Lovegrove 2009
Mercury Cluster suspension
halogen source• 5 x 200W (R7S/T3) supplied.............
“A ceiling fixture that places a floating assembly of largepebbles below a simple modern aluminum disc. These in turnreflect each other, bouncing light between their taughtbio-morphic surfaces and reflecting the environment aroundthem. During the day, the piece acts as a sculptural objectreflecting the dynamics of natural light and movement ofpeople around them.”
- Ross Lovegrove
Cable suspended or ceiling mounted luminaire for indirecthalogen lighting. Custom configurations available.
• reflective units (pebbles) made of molded thermoplasticwith polished chrome finish
• reflective units (pebbles) containing light source in die-castaluminum polished chrome finish
• disc in die-cast aluminum in pale grey finish• grey thermoplastic canopy with clear electrical cord andstainless steel cables
• mounting directly to rigid ceiling surface (hardware by others)over standard electrical junction boxes
31 1/2”80 cm
94 1/2”240 cm
21 11/16”55 cm
13 large pebbles16 15/16” x 6 1/4”43 x 15.8 cm
21 medium pebbles11” x 4 3/4”27.8 x 12.1 cm
41 small pebbles8 3/8” x 3 11/16”21.2 x 9.3 cm
5 lighting pebbles7 5/16” x 4 1/2”18.6 x 11.5 cm
10
11
Mercury Special ProjectsPlease contact your Area Sales Manager or Sales Representative for moreinformation on the countless ways the Mercury can be configured.The Artemide Engineering Team can provide you with detailed drawings.
12
Droplet ceilingDroplet mini ceiling/wallRoss Lovegrove 2009
Droplet mini ceiling/wall
halogen source• 1 x 200W (R7S/T3) supplied.............
ø 23 5/8”ø 60 cm
13 3/8”34 cm
2”5 cm
“Droplet is a ceiling light that appears as a pool of liquidaluminum reflecting three light pebbles. It has been generatedtotally by digital means and freezes in time the act of ripplesthat cross each other to define reflective zones and acts asa form of liquid dichroic.”
- Ross Lovegrove
Ceiling or wall (mini only) mounted luminaires for indirecthalogen lighting.
• reflective units (pebbles) and stem in die-cast aluminumpolished chrome finish
• disc in die-cast aluminum in glossy grey finish• mounting directly to rigid ceiling surface (hardware by others)over standard electrical junction boxes
Droplet ceiling
halogen source• 3 x 200W (R7S/T3) supplied.............
ø 43 1/4”ø 110 cm
12 5/8”32 cm
2”5 cm
mini ceiling/wallceiling
13
Droplet suspensionRoss Lovegrove 2008
Droplet suspension
halogen source• 3 x 200W (R7S/T3) supplied.............
12 5/8”32 cm
max 78 3/4”max 200 cm
ø 43 1/4”ø 110 cm
2”5 cm
“Droplet is a ceiling light that appears as a pool of liquidaluminum reflecting three light pebbles. It has been generatedtotally by digital means and freezes in time the act of ripplesthat cross each other to define reflective zones and acts asa form of liquid dichroic.”
- Ross Lovegrove
Cable suspended luminaire for indirect halogen lighting.
• reflective units (pebbles) and stem in die-cast aluminumpolished chrome finish
• disc in die-cast aluminum in glossy grey finish• grey thermoplastic canopy with clear electrical cord andstainless steel cables
• mounting to standard electrical junction boxes
14
Skydro ceilingRoss Lovegrove 2009
Skydro ceiling (non-electrified)
56 1/8”142.5 cm
53 1/2”135.8 cm
5 3/8”13.6 cm
A series of pebbles forms a bright sky reflecting the light thatbounces on its biomorphic surfaces.
Ceiling mounted luminaire for indirect halogen lighting.
• reflective units (pebbles) made of molded thermoplastic withpolished chrome finish
• available in two versions:electrified: indirect light comes from lighting unit
integrated in luminairenon-electrified: indirect light comes from other light source
that is separate from luminaire• die-cast aluminum reflector• single modules can be grouped together to formvarious configurations
• optional multi-module installation kit• mounting to standard electrical junction boxes and withprovision for additional concealed ceiling fastening
Skydro ceiling (electrified)
halogen source• 1 x 200W (R7S/T3)...........................
56 1/8”142.5 cm
53 1/2”135.8 cm
16 5/8”42.2 cm
electrified non-electrified
16
Aqua Cil tableRoss Lovegrove 2008
Aqua Cil table
incandescent source• 1 x 150W (E26/A21).................................
or
halogen source• 1 x 150W (E26/T10)..................................
14 9/16”37 cm
7 1/8”18 cm
7 1/16”18 cm
ø 12 5/8”ø 32 cm
polished chrome
polished metallic orange
polished metallic blue
Table standing luminaire for direct and indirect incandescentor halogen lighting.
• diffuser in mirror-treated aluminum available in polishedchrome, polished metallic orange, or polished metallic blue
• base and structure in die-cast aluminum, stem in steel,satin chrome finish
• touch dimmer on body
17
Aqua Cil floorRoss Lovegrove 2008
Aqua Cil floor
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
63”160 cm
9 7/16”24 cm
7 1/16”18 cm
ø 12 5/8”ø 32 cm
polished chrome
polished metallic orange
polished metallic blue
Floor standing luminaire for direct and indirect halogen lighting.
• diffuser in mirror-treated aluminum available in polishedchrome, polished metallic orange, or polished metallic blue
• base in die-cast aluminum with satin chrome steel stem• touch dimmer on body
18
Aqua Cil ceilingRoss Lovegrove 2009
Aqua Cil ceiling
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
ø 12 5/8”ø 32 cm
ø 4 5/16”ø 11 cm
7 1/8”18 cm
9 7/16”24 cm
Ceiling mounted luminaire for direct and indirect halogen lighting.
• diffuser in mirror-treated aluminum available in polishedchrome, polished metallic orange, or polished metallic blue
• lamp shielded by injection-molded thermoplastic diffuser• mounting to standard electrical junction boxes
polished chrome
polished metallic orange
polished metallic blue
19
Aqua Cil suspensionRoss Lovegrove 2008
Aqua Cil suspension
incandescent source• 1 x 150W (E26/G40).................................
or
halogen source• 1 x 150W (E26/T10)..................................
ø 12 5/8”ø 32 cm
ø 4 5/16”ø 11 cm
max 59 1/16”max 150 cm
2 3/4”7 cm
7 1/16”18 cm
Cable suspended luminaire for direct and indirect incandescentor halogen lighting.
• diffuser in mirror-treated aluminum available in polishedchrome, polished metallic orange, or polished metallic blue
• grey thermoplastic canopy with clear electrical cord andstainless steel cable
• mounting to standard electrical junction boxes
polished chrome
polished metallic orange
polished metallic blue
20
Aqua Ell tableRoss Lovegrove 2009
Aqua Ell table
halogen source• 1 x 150W (E26/T10)..................................
14 9/16”37 cm
7 1/8”18 cm
7 1/16”18 cm
ø 14 3/16”ø 36 cm
ø 5 1/2”ø 14 cm
Table standing luminaire for direct and diffused halogen lighting.
• hydroformed diffuser in mirror-treated aluminum inpolished chrome
• base and structure in die-cast aluminum, stem in steel,satin chrome finish
• touch dimmer on body
21
Aqua Ell floorRoss Lovegrove 2009
Aqua Ell floor
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
63”160 cm
9 7/16”24 cm
7 1/16”18 cm
ø 14 3/16”ø 36 cm
ø 5 1/2”ø 14 cm
Floor standing luminaire for direct and indirect halogen lighting.
• hydroformed diffuser in mirror-treated aluminum availablein polished chrome
• base and stem in die-cast aluminum with satin chrome finish,inner stem in steel
• touch dimmer on body
22
Aqua Ell suspensionRoss Lovegrove 2009
Aqua Ell suspension
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
ø 14 3/16”ø 36 cm
ø 4 5/16”ø 11 cm
max 59 1/16”max 150 cm
2 3/4”7 cm
ø 5 1/2”ø 14 cm
Cable suspended luminaire for direct and indirect halogen lighting.
• hydroformed diffuser in mirror-treated aluminum inpolished chrome
• grey thermoplastic canopy with clear electrical cord andstainless steel cable
• mounting to standard electrical junction boxes
Special ProjectsDo you remember playing with building blocks as a child?Do you remember having the freedom to follow yourimagination anywhere it took you?Working today as a professional designer, the reality ofinflexible materials can limit your design projects.Artemide offers you a different experience.
The versatile and modular design of many Artemidelighting products allows you to explore like a child again.Because so many Artemide products can be combinedand configured in countless ways, they serve as“building blocks” for designers and space plannerslooking to create environments that are fresh, customized,and one-of-a-kind.
26
Logico ceilingLogico mini ceilingLogico micro ceilingLogico nano ceilingMichele De Lucchi, Gerhard Reichert
Ceiling mounted luminaires for diffused incandescent orfluorescent lighting for applications with a single diffuser unitor with an assembly of three or four diffuser units in a linear ornested configuration. Custom configurations available.
• diffuser in handblown glass with satined finish• diffuser(s) supporting frame and canopy in die-cast aluminumwith pale grey matte lacquered finish
• mounting to standard electrical junction boxes and withprovision for additional concealed ceiling fastening fortriple and quadruple configurations
• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Logico versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Awards
Design Innovationen DesignZentrum Nordrhein WestfalenReddot Design Award2002 - Essen (Deutschland)
Hotel Le Favaglie, Cornaredo - Milan (Italy)
Marriott Hotel, Uniondale (New York)
eco design
27
Logico suspensionLogico mini suspensionLogico micro suspensionLogico nano suspensionLogico nano trackMichele De Lucchi, Gerhard Reichert
Suspension mounted luminaires for diffused incandescent orfluorescent lighting for applications with a single diffuser unitor with an assembly of three, four, or five diffuser units in alinear or nested configuration. Logico nano track mountedsuspension luminaire for diffused incandescent lighting.Custom configurations available.
• diffuser(s) in handblown glass with satined finish• diffuser(s) supporting frame in die-cast aluminum with palegrey matte lacquered finish
• frame supporting cables in stainless steel• ceiling canopy in steel with pale grey thermoplastic cover• mounting to standard electrical junction boxes and withprovision for additional concealed ceiling fastening fortriple configurations
• mounting to Lightolier or Halo track for Logico nano track• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Logico versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us eco design
28
15 3/4”40 cm
12 3/4”32.5 cm
15 3/4”40 cm
standard
incandescent source• 1 x 150W (E26/A21)........................
or
• 1 x 150W (E26/G40)........................
or
fluorescent source• 1 x 26W (GX24q-3/T4)..................
9”23 cm
11”28 cm
11”28 cm
mini
incandescent source• 1 x 100W (E26/A19)........................
or
• 1 x 100W (E26/G25)........................
or
fluorescent source• 1 x 18W (GX24q-2/T4)..................
7 1/2”19 cm
7”18 cm
7”18 cm
micro
incandescent source• 1 x 60W (E12/G16 1⁄2).......................
4 1/4”11 cm
4 1/4”11 cm
5”13 cm
7
nano
incandescent source• 1 x 60W (E12/G16 1⁄2).......................
15 3/4”40 cm
12 1/4”31 cm
ø 7 1/8”ø 18 cm
max 78 3/4”max 200 cm
8 11/16”22 cm
ø 7 1/8”ø 18 cm
11”28 cm
max 78 3/4”max 200 cm
6 3/4”17 cm
max 78 3/4”max 200 cm
7”18 cm
m
ø 7 1/8”ø 18 cm
max 66 15/16”max 170 cm
4 1/4”11 cm
5 1/8”13 cm
ø 7 1/8”ø 18 cm
ø
Logico Special ProjectsPlease contact your Area Sales Manager or Sales Representative for more information on the countless waysthe Logico can be configured. The Artemide Engineering Team can provide you with detailed drawings.
29
Villa Borsig, Berlin (Germany)
Hotel Le Favaglie, Milan, Italy
Tiger Lily, Edinburgh, UK
suspension• cable suspended luminaire providing indirect lighting using24W and 54W T5 fluorescent lamps
• modules are made from aluminum with white paint finish• polycarbonate diffuser included• each luminaire is composed of pre-assembled and pre-wiredsub-units, electrical connection is made via quick connectors
• four standard 2D and 3D kits delivered with a drillingtemplate for placing the ceiling fixing points
• support cables in stainless steel supplied with grip-lockconnectors for quick height adjustment at installation
• ceiling feeder canopy in steel and thermoplastic, mountingto standard electrical junction boxes
• ceiling non-feeder canopy in steel and thermoplastic, mountingdirectly to rigid ceiling surface (hardware not supplied)
• equipped with thermally protected, class P, high power factor120V electronic fluorescent ballast
• for 277V electronic fluorescent ballast, dimmable electronicballast, and emergency lighting options, please consult yourArtemide Sales Representative
KaoBruno Houssin 2008
32
wall/ceiling• wall or ceiling mounted luminaire providing indirect lightingusing 24W and 54W T5 fluorescent lamps
• modules are made from aluminum with white paint finish• polycarbonate diffuser included• each luminaire is composed of pre-assembled and pre-wiredsub-units, electrical connection is made via quick connectors
• three standard 2D and 3D kits delivered with a drillingtemplate for placing the ceiling fixing points
• assembly protrudes out from wall or ceiling at 6 5⁄16” (160mm)• ceiling or wall feeder canopy in steel and thermoplastic,mounting to standard electrical junction boxes
• ceiling or wall non-feeder canopy in steel, mounting directlyto rigid ceiling or wall surface (hardware not supplied)
• equipped with thermally protected, class P, high power factor120V electronic fluorescent ballast
• for 277V electronic fluorescent ballast, dimmable electronicballast, and emergency lighting options, please consult yourArtemide Sales Representative
for additional information on this model, please refer to theArtemide Architectural binder
Kao, CF Maier GMBH & Co. KG, Königsbronn, 2008
50,000 hours of LED light = 50
10W LED = 100W
LED = 90% energy savings
WE LED
36
Talak LED clampTalak LED tableTalak FLU clampTalak FLU tableNeil Poulton 2008
Talak FLU/LED table
fluorescent source• 1 x 13W (axial/T2) supplied................
or
LED source• 80 LEDs/8W supplied
33 9/16”85.3 cm
1 1/16”2.7 cm
max 27 9/16”max 70 cm
ø 6 7/16”ø 16.4 cmClamp mounted and table standing luminaires for direct and
adjustable task fluorescent or LED lighting.
• body in injection molded thermoplastic in matte whitepowder coated finish, incorporating miniature T2 fluorescentor energy saving LED lighting
• body rotates 360˚ and can be adjusted in height by slidingit along its stem
• stem in polished chromed steel• clamp in die-cast aluminum with minimum 1/2” (1.27 cm)and maximum 2” (5 cm) opening
• table base in weighted steel with matte whitethermoplastic cover
LED version• dimmer switch on body• LED driver located on cord
FLU version• electronic ballast incorporated in body• on/off switch on body
Talak FLU/LED clamp
fluorescent source• 1 x 13W (axial/T2) supplied................
or
LED source• 80 LEDs/8W supplied
33 9/16”85.3 cm
max 24 1/8”max 61 cm
3”7.6 cm
1 1/16”2.7 cm
clamp fluorescent version table LED version
AwardsTalak tavolo“Observeur du Design” 2005Etoile 2005 A.P.C.I. - Paris (France)
Reddot Award Product design“Best of the Best 2006”Essen (Deutschland)
Compasso D’oro / A.D.I.Segnalazione2008 - Milano (Italia) eco design
37
Talak LED floorTalak FLU floorNeil Poulton 2008
Talak FLU floor
fluorescent source• 1 x 13W (axial/T2) supplied..............
Talak LED floor
LED source• 80 LEDs/8W supplied
ø 9”ø 23 cm
1 3/16”3 cm
13/16”2 cm
33 1/2”85 cm
54 3/4”139 cm
Floor standing luminaires for direct adjustable fluorescentor LED lighting.
• body in injection molded thermoplastic in matte whitepowder coated finish, incorporating miniature T2 fluorescentor energy saving LED lighting
• body rotates 360˚ and can be adjusted in height by slidingit along its stem
• stem in polished chromed steel• floor base in white painted steel
LED version• dimmer switch on body• energy efficient LED utilizing an array of 80 LEDs/8W
FLU version• electronic ballast incorporated in body• on/off switch on body
eco design
38
Talak LED wallTalak FLU wallNeil Poulton 2009
Talak FLU/LED wall
fluorescent source• 1 x 13W (axial/T2) supplied................
or
LED source• 80 LEDs/8W supplied
13/16”2 cm
33 5/8”85.3 cm
1 1/16”2.7 cm
2 3/8”6 cm
max h 24 3/8”max h 61.9 cm
2 3/8”6 cm
1 1/16”2.7 cm
Wall mounted luminaires for direct and adjustable taskfluorescent or LED lighting.
• body in injection molded thermoplastic in matte whitepowder coated finish, incorporating miniature T2 fluorescentor energy saving LED lighting
• body rotates 360˚ and can be adjusted in height by slidingit along its stem
• stem in polished chromed steel• wall bracket in die-cast aluminum suitable for mounting tosolid wall surface
LED version• dimmer switch on body• LED driver located on cord
FLU version• electronic ballast incorporated in body• on/off switch on body
eco design
39
One Line LED tableOne Line FLU tableOra Ito 2008
Table standing luminaires for direct task LED orfluorescent lighting.
• body with steel support in extruded aluminum in pale grey finish• base in die-cast aluminum, rotatable 360˚• fluorescent diffuser in injected molded polycarbonate withslightly protruding transparent side screen housing aminiature T2 fluorescent light source
• electronic ballast located in base for fluorescent version• dimmer switch located on body for LED version• LED driver located on cord• on/off switch located on body for fluorescent version
AwardsOne Line FLU tableReddot Design Award2005 - Essen (Deutschland)
One Line LED table
LED source• 80 LEDs/8W supplied
1 9/16”3.9 cm
ø 5 3/8”ø 13.7 cm
16 1/4”41.3 cm
6 1/2”16.5 cm
25”63.5 cm
eco design
One Line FLU table
fluorescent source• 1 x 11W (axial/T2) supplied................
1 9/16”3.9 cm
ø 5 3/8”ø 13.7 cm
15 15/16”40.4 cm
6 1/2”16.5 cm
25”63.5 cm
LED version fluorescent version
40
Tizio classic LED tableRichard Sapper 2009
Table standing luminaire for adjustable direct task LED lighting.
• fully adjustable balanced electrical conductor arms inanti-corrosion treated aluminum
• arm spacer bars in chromed steel with red moldedthermoplastic insulators
• counter weights in die-cast zinc alloy with translucentpolycarbonate shield
• adjustable head in die-cast aluminum• 360˚ rotatable base in die-cast aluminum withincorporated dimmer
For additional Tizio versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Tizio classic LED table
LED source• 5 LEDs/8W supplied
ø 4 1/4ø 11 cm
26”66 cm
30 3/4”78 cm
46 7/8”119 cm 42 1/2”
108 cm
12 7/16”31.5 cm
ø
eco design
Tizio classic LED floorRichard Sapper 2009
27 9/16”70 cm
ø 4 5/16”ø 11
Floor standing luminaire for adjustable direct task LED lighting.
• floor support in lacquered steel with snap-in adaptor kit inmolded thermoplastic, applicable with Tizio classic LED tablemodel for conversion to floor model, available in black only
For additional Tizio versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Tizio classic LED floor
LED source• 5 LEDs/8W supplied
eco design
41
42
Itis tableNaoto Fukasawa 2009
Itis table
LED source• 7 LEDs/4W supplied
20”51 cm
ø 4 3/4”ø 12 cm
3/8”1 cm
15 3/4”40 cm
11 13/16”30 cm
13 3/4”35 cm
ø 4 3/4”ø 12 cm
Table standing luminaire for direct task and diffused LED lighting.
• re-engineered using stronger newly innovative low energyLED light source to provide a warm (2900k) intense lightresulting in a 20% increase in light output yet decreasingenergy consumption by 25%
• body, base, and head in steel with glossy black or whitepainted finish
• side diffuser in transparent polycarbonate• stem pivots at base up to 90˚• head rotates up to 180˚• dimmer switch on base
Awards
Reddot Design Award“Best of the Best”2007 - Essen (Deutschland)
Good Design AwardThe Chicago Atheneum2007 - Chicago (US)
Museums
Die Neue SammlungState Museum of Applied Artsand Design in the Pinakothekfder ModernMünchen (Deutschland)
eco design
44
Tolomeo classic LED tableTolomeo classic LED floorMichele De Lucchi, Giancarlo Fassina 2009
Tolomeo classic LED table and floor
LED source• 5 LEDs/10W supplied
25 7/16”64.5 cm
30 3/4”78 cm
50 13/16”129 cm
ø 9”ø 23 cm
48”122 cm
ø
Table and floor standing luminaires for adjustable direct taskLED lighting.
• fully adjustable articulated arm structures in polished aluminum• joints and tension control knobs in polished die-cast aluminum• internal tension springs and external tension control cablesin stainless steel
• tiltable diffuser in aluminum with incorporated touchdimmer and translucent polycarbonate shield rotates90˚ in both directions
• floor support consisting of weighted steel base with stampedaluminum cover and stem in chromed steel, combined withTolomeo classic LED table model for conversion to floor model
• optional set of castors in molded thermoplastic attach to baseof floor model for easy mobility
Choice of table mountings:• ø 9” (23 cm) base in weighted steel with stampedaluminum cover
• table clamp in die-cast aluminum, maximum openingis 2” (5 cm)
• table in-set pivot in die-cast aluminum, maximum tablethickness is 2 1/2” (6.4 cm), hole is ø 3/4” (1.9 cm)
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
eco design
ø 13”ø 33 cm
89”226 cm
35”89 cm
40 9/16”103 cm
63 3/4”162 cm
52 3/4”134 cm
44 1/4”112 cm
floor support
45
Tolomeo classic LED wallMichele De Lucchi, Giancarlo Fassina 2009
Wall mounted luminaire for adjustable direct task LED lighting.
• wall surface mounted bracket support ø 3 1/4” (ø 8.25 cm) inpolished die-cast aluminum, suitable for luminaire cord andplug connection to wall outlet only
• wall junction box support ø 4 1/2” (ø 11.43 cm) in polisheddie-cast aluminum, only suitable for plug in application to walloutlet (cannot be hardwired to junction box as driver is on cord)
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Tolomeo classic LED wall
LED source• 5 LEDs/10W supplied
51 9/16”131 cm
26 3/8”67 cm
31 7/8”81 cm
49 5/8”126 cm
surface
eco design
46
Tolomeo micro table in colorsMichele De Lucchi 2009
Tolomeo micro table in colors
incandescent source• 1 x 60W (E12/G16 1⁄2 CL) supplied............
28 3/4”73 cm
ø 6 3/4”ø 17 cm
14 9/16”37 cm
17 1/2”44.5 cm
27 3/16”69 cm
t
Table standing luminaires for adjustable, direct task,incandescent lighting.
• fully adjustable articulated arm structures in extruded aluminum• joints and tension control knobs in polished die-cast aluminum• tension cables in stainless steel• internal tension springs and external tension control cablesin stainless steel
• tiltable diffuser in stamped aluminum rotatable 360˚ inmatching color
• base in weighted steel with stamped aluminum cover inmatching color
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
black yellow bronze orange grey/blue blue
Tolomeo with shadereading floorMichele De Lucchi, Giancarlo Fassina 2008
Tolomeo with shade reading floor
incandescent source• 1 x 75W (E26/A19)...................................
or
fluorescent source• 1 x 13W (GX24q-1/T4)..........................
Floor standing luminaire for adjustable direct and diffusedincandescent or fluorescent task lighting.
• fully adjustable articulated arm structure in extrudedaluminum in high polished anodized finish
• joints and tension control knobs in polished die-cast aluminum• tension cables in stainless steel• 7” diameter shade available in parchment paper or in palegrey satin and polycarbonate fiber blend, remains verticalregardless of arm angle
• weighted steel base with stamped aluminum cover• incorporated on/off switch on lampholder• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
42 1/2”108 cm
34 1/4”87 cm
ø
15°
25 5/8”65 cm
4ø 7 1/16”ø 18 cm
5 5/16”13.5 cm
eco design
47
48
Tolomeo mega suspensionMichele De Lucchi, Giancarlo Fassina 2008
Cable suspended luminaire for direct and diffusedincandescent or fluorescent lighting.
• diffuser in parchment paper or pale grey satin andpolycarbonate fiber blend
• structure in aluminum and injected molded polycarbonate• ceiling canopy in steel with thermoplastic cover• suspension cables in stainless steel• mounting to standard electrical junction boxes• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Tolomeo 52 mega suspension
incandescent source• 1 x 150W (E26/A21).................................or• 1 x 150W (E26/G40).................................
or
fluorescent source• 1 x 26W (GX24q-3/T4)..........................
Tolomeo 42 mega suspension
incandescent source• 1 x 150W (E26/A21).................................or• 1 x 150W (E26/G40).................................
or
fluorescent source• 1 x 26W (GX24q-3/T4)..........................
ø 7 1/8”ø 18 cm
2”5 cm
ø 16 1/2”ø 42 cm
14 3/16”36 cm
max 78 3/4”max 200 cm
ø
ø 20 1/2”ø 52 cm
2”5 cm
ø 7 1/8”ø 18 cm
14 3/16”36 cm
max 78 3/4”max 200 cm
eco design
49
Tolomeo 7-10-12 wall shadeMichele De Lucchi, Giancarlo Fassina 2009
Adjustable wall mounted luminaires for direct and diffusedincandescent or fluorescent lighting.
• wall support, joints, canopy, and arm in polished aluminum• diffuser with aluminum frame in parchment paper or in palegrey satin and polycarbonate fiber blend
• adjusts to full downward and max. 30˚ upward positions• mounting to standard electrical junction boxes• on/off switch on lamp holder• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Tolomeo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
6 9/16”16.7 cm
19 3/16”48.8 cm
12 5/8”32 cm
16”40.6 cm
ø 12 5/8”ø 32 cm
30˚
ø 4 5/16”ø 11cm
ø
5”12.7 cm
14 1/2”36.8 cm
9 7/16”24 cm
13 7/8”35.2 cm
ø 9 7/16”ø 24 cm
30˚
ø 4 5/16”ø 11cm
3 13/16”9.7 cm
11”27.8 cm
7 1/8”18 cm
12 7/8”32.6 cm
ø 7 1/8”ø 18 cm
ø 4 5/16”ø 11cm
30˚
Tolomeo 7 wall shade
incandescent source• 1 x 60W (E26/A19)...................................
or
fluorescent source• 1 x 13W (GX24q-1/T4)..........................
Tolomeo 10 wall shade
incandescent source• 1 x 100W (E26/A19).................................
or
fluorescent source• 1 x 18W (GX24q-2/T4)..........................
Tolomeo 12 wall shade
incandescent source• 1 x 150W (E26/A21).................................
or
fluorescent source• 1 x 18W (GX24q-2/T4)..........................
eco design
THE HUMAN LIGHT.Everywhere in the world, the light of Artemide for the wellness of man.
®
52
Cabildo floorEric Solé 2008
Cabildo floor
halogen source• 1 x 300W (R7S/T3) supplied.............
7 1/2”19 cm
72 1/16”183 cm
ø 11 13/16”ø 30 cm
16 1/8”41 cm
Floor standing luminaire for indirect and diffused halogen lighting.
• body structure in die-cast aluminum in painted white finish• base and stem in steel in painted white finish• specular aluminum reflector and lamp concealed in theinner curve of the structure
• lamp shielded by frosted glass guard• sliding foot dimmer switch on cord
53
Cabildo wallEric Solé 2008
Cabildo wall
halogen source• 1 x 300W (R7S/T3) supplied.............
16 1/8”41 cm
4 5/16”11 cm
9 1/16”23 cm
5 1/8”13 cm
Wall mounted luminaire for indirect and diffusedhalogen lighting.
• upper body structure and wall support in die-cast aluminumin painted white finish
• specular aluminum reflector and lamp concealed in theinner curve of the structure
• lamp shielded by frosted glass guard• wall support bracket mounting to standard electricaljunction boxes
54
Cabildo suspensionEric Solé 2008
Cabildo suspension
halogen source• 1 x 300W (R7S/T3) supplied.............
Cable suspended luminaire for indirect and diffusedhalogen lighting.
• body structure in die-cast aluminum in painted white finish• specular aluminum reflector and lamp concealed in thisinner curve of the structure
• lamp shielded by frosted glass guard• canopy in white molded thermoplastic with clear electricalcords and stainless steel cable
• mounting to standard electrical junction boxes16 1/8”41 cm
7 1/2”19 cm
m
max 59 1/16”max 150 cm
1 3/16”3 cm
56
Monroe tableOra Ito 2009
Monroe table
incandescent source• 1 x 150W (E26/G40)................................or• 1 x 150W (E26/A21)................................
ø 9 7/8”ø 25 cm
20 1/16”51 cm
30 5/16”77 cm
20 1/2”52 cm
Table standing luminaire for adjustable diffusedincandescent lighting.
• diffuser in white thermoplastic with incorporated whitetextured insert
• rotatable 360˚ allowing a wide range of orientation of thelight on the work surface
• base and structure in steel with polished white finish• on/off switch on cord
57
Soffione 36-45 tableMichele De Lucchi 2009
10 7/8”27.6 cm
ø 17 11/16”ø 45 cm
Table standing luminaires for diffused halogen lighting.
• diffuser shape similar to the geometric structure of crystals• diffuser in white handblown glass with polished silk finish• concealed base in white molded thermoplastic withweighted steel base
• dimmer switch on cord
Soffione 36 table
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
8 3/4”22.2 cm
ø 14 3/16”ø 36 cm
Soffione 45 table
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
58
Soffione 36-45 stem tableMichele De Lucchi 2009
28 3/4”73 cm
ø 10 3/4”ø 27 cm
ø 17 11/16”ø 45 cm
Table standing luminaires for diffused halogen lighting.
• diffuser shape similar to the geometric structure of crystals• diffuser in white handblown glass with polished silk finish• base in die-cast aluminum and steel stem• base and stem available in polished black or polishedchrome finish
• dimmer switch on cordø 14 3/16”ø 36 cm
ø 9 1/16”ø 23 cm
22 3/16”56.4 cm
Soffione 36 table
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
Soffione 45 table
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
59
Soffione floorMichele De Lucchi 2009
Soffione floor
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
72 13/16”185 cm
ø 13 3/8”ø 34 cm
ø 17 11/16”ø 45 cm
Floor standing luminaire for diffused halogen lighting.
• diffuser shape similar to the geometric structure of crystals• diffuser in white handblown glass with polished silk finish• base in die-cast aluminum and steel stem• base and stem available in polished black or polishedchrome finish
• dimmer switch on cord
60
Soffione 36-45 wall/ceilingMichele De Lucchi 2009
10 7/8”27.6 cm
ø 17 11/16”ø 45 cm
Wall or ceiling mounted luminaires for diffused halogen lighting.
• diffuser shape similar to the geometric structure of crystals• diffuser in white handblown glass with polished silk finish• concealed mounting plate in white molded thermoplastic• mounting to standard electrical junction boxes
Soffione 36 wall/ceiling
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
8 3/4”22.2 cm
ø 14 3/16”ø 36 cm
ø
Soffione 45 wall/ceiling
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
61
Soffione 36-45 suspensionMichele De Lucchi 2009
Suspension mounted luminaires for diffused halogen lighting.
• diffuser shape similar to the geometric structure of crystals• diffuser in white handblown glass with polished silk finish• suspension cable in stainless steel• ceiling plate in steel with canopy in white molded thermoplastic• mounting to standard electrical junction boxes
Soffione 45 suspension
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
max 78 3/4”max 200 cm
8
ø 6”ø 15 cm 1 3/16”
3 cm
10 13/16”27.5 cm
ø 17 11/16”ø 45 cm
Soffione 36 suspension
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
8 11/16”22 cm
ø 6”ø 15 cm
max 78 3/4”max 200 cm
1 3/16”3 cm
ø 14 3/16”ø 36 cm
62
Pirce suspension
halogen source• 1 x 300W (R7S/T3) supplied.............
ø 7 1/8”ø 18 cm
11”30 cm
84”213.4 cm
34 3/4”88.3 cm
38 1/2”97.7 cm
Pirce suspensionGiuseppe Maurizio Scutellà 2009
Cable suspension mounted luminaire for indirect halogen lighting.
• structure in aluminum in white finish• one continuous slender piece of aluminum is used to createa unique spiral
• ceiling canopy in steel with thermoplastic cover• suspension cables in stainless steel• mounting to standard electrical junction boxes
Awards
Reddot Design Award2009 - Essen (Deutschland)
64
Alicudi ceilingOra Ito 2009
Alicudi ceiling
fluorescent source• 2 x 42W (GX24q-4/T4)..........................
10 1/4”26 cm
ø 27 9/16”ø 70 cm
Ceiling mounted luminaire for diffused fluorescent lighting.
• diffuser in opal white acrylic with white stretch fabric covering• concealed mounting plate in white steel• mounting to standard electrical junction boxes
eco design
Zeffiro 80-140 ceilingPio & Tito Toso 2009
Zeffiro 140 ceiling
fluorescent source• 2 x 54W (G5/T5)...............................
55 1/2”141 cm
4 3/4”12 cm
11”28 cm
9 1/16”23 cm
Ceiling mounted luminaires for diffused fluorescent lighting.
• diffuser in opal white methacrylate giving the appearanceof opal white glass
• structure in painted white steel• fasteners in clear acrylic• mounting to standard electrical junction boxes
Zeffiro 80 ceiling
fluorescent source• 1 x 55W (2G11/T5)............................
8 11/16”22 cm
5
31 1/2”80 cm
6 1/4”15.8 cm
4 3/4”12 cm
Zeffiro 80
Zeffiro 140
eco design
65
66
Noto suspensionMichele De Lucchi 2009
Suspension mounted luminaire for diffused fluorescent lighting.
• the dragon, a symbol of eternity and power in the Chinesetradition, is transformed from paper into glass and light, sixmovable cylinders form a luminaire with great impact and astrong personality
• diffusers in white opal handblown glass• structure in steel• supplied with optional red external filter• mounting to standard electrical junction boxes with additionalsupport cable mounting to rigid ceiling surface
Awards
Reddot Design Award2008 - Essen (Deutschland) Noto suspension
fluorescent source• 2 x 80W (G5/T5 HO)...........................
68 1/8”173 cm
33 7/8”86 cm
15 3/16”38.5 cm
eco design
67
Tian Xia 2 RGB suspensionCarlotta de Bevilacqua 2008
Cable suspended cylindrical luminaire that offers a direct,indirect, and diffused halogen lighting and diffused coloredfluorescent lighting.
• structure in polished aluminum with mirror finish andthermoplastic resin mirrored diffuser
• ceiling canopy in polished aluminum incorporates amicroprocessor and remote controlled, infrared receiver
• three separately managed light systems:- the RGB fluorescents (12 in total) are positioned in the cavityof the diffuser cylinder, and produce the 6 different colorranges and a white light- 1 300W indirect halogen and 1 300W direct halogen caneach be dimmed independently
• a color filter is provided for direct halogen light• light performance is controlled by a remote control unit• suspension cables in stainless steel• mounting to standard electrical junction boxes
For additional Tian Xia versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Tian Xia 2 RGB suspension
halogen source• 1 x 300W (R7S/T3) supplied.............
+
• 1 x 300W (R7S/T3) supplied.............
+
fluorescent source• 4 x 14W (G5/T5 blue) supplied..........
+
• 4 x 14W (G5/T5 red) supplied............
+
• 4 x 14W (G5/T5 green) supplied........
ø 31 1/2”ø 80 cm
max 78 3/4”max 200 cm
17 3/4”45 cm
ø 11 13/16”ø 30 cm
68
Eurialo wallPio & Tito Toso 2008
Eurialo wall
fluorescent source• 1 x 32W (GX24q-3/T4)...........................
14 3/16”36 cm
4 5/8”11.7 cm
6 1/4”15.8 cm
Wall mounted luminaires for indirect and direct halogen orfluorescent lighting.
• diffuser in molded aluminum with inner reflector in paintedwhite and outer body in white, black, or aluminum
• halogen version suitable for ADA application• mounting to standard electrical junction boxes
Eurialo wall ADA
halogen source• 1 x 200W (R7S/T3) supplied.............
14 3/16”36 cm
4”10.2 cm
6 1/4”15.8 cm
ADA
aluminum
black
white
eco design
69
Choose suspensionChoose mega suspensionMatteo Thun 2008
Choose suspension
incandescent source• 1 x 100W (E26/A19).................................
or
fluorescent source• 1 x 13W (GX24q-1/T4)..........................or• 1 x 18W (GX24q-2/T4)..........................
ø 14 3/16”ø 35.8 cm
ø 5 1/8”ø 13 cm
max 78 3/4”max 200 cm
1 15/16”5 cm
8 7/8”22.5 cm
Cable suspended luminaires for direct and diffusedincandescent or fluorescent lighting.
• diffuser in transparent polycarbonate with pleated designincorporating a red thermoformed silk-screened polycarbonateor parchment paper removable insert (custom colors available)
• grey thermoplastic canopy with clear electrical cords andstainless steel cable
• mounting to standard electrical junction boxes• newly redesigned to incorporate compact fluorescent optionutilizing GU24 base with integrated ballast and lamp holder
For additional Choose versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
eco design
Choose mega suspension
incandescent source• 3 x 100W (E26/A19).................................
or
fluorescent source• 3 x 13W (GX24q-1/T4)..........................or• 3 x 18W (GX24q-2/T4)..........................
ø 5 1/8”ø 13 cm
1 15/16”5 cm
max 78 3/4”max 200 cm
14 9/1637 cm
ø 21 11/16”ø 55 cm
70
Pipe wall/ceilingHerzog & de Meuron 2008
Pipe wall/ceiling
fluorescent source• 1 x 32W (GX24q-3/T4)..........................
Wall or ceiling mounted luminaire for adjustable direct andindirect fluorescent lighting.
• body structure in flexible steel tube with grey lacqueredfinish enclosed in a translucent white silicon sleeve
• diffuser in molded translucent white polycarbonate with anincorporated anti-glare reflector in specular aluminum withmicro-perforations for side emission of thin beams of light
• mounting to standard electrical junction boxes
For additional Pipe versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
46 7/16”118 cm
ø 8 1/4”ø 21 cm
ø 7 1/16”ø 18 cm
eco design
72
Nur Gloss suspensionNur mini Gloss suspensionErnesto Gismondi 2009
Cable suspended luminaires providing direct halogen orfluorescent lighting with subtle indirect lighting.
• highly polished and smooth domed diffuser in spun aluminum,available in glossy white or glossy black with sanded glass attop of dome
• acrylic diffuser at bottom to shield the lamps• ceiling canopy in steel with thermoplastic cover• suspension cables in stainless steel• mounting to standard electrical junction boxes
For additional Nur versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
blackwhite
Nur mini Gloss suspension
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
or
fluorescent source• 1 x 42W (GX24q-4/T4)..........................
max 78 3/4”max 200 cm
11 1/4”28.5 cm
ø 14 3/16” ø 36 cm
ø 7 1/8”ø 18 cm
ø
Nur Gloss suspension
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
or
fluorescent source• 1 x 70W (GX24q-6/T4)..........................
max 86 5/8”max 220 cm
16 15/16”43 cm
ø 21 11/16”ø 55 cm
ø 7 1/8”ø 18 cm
eco design
74
Nur ceilingNur mini ceilingErnesto Gismondi 2008
Nur mini ceiling
halogen source• 1 x 150W (E26/T10 dbl. env.)....................
or
fluorescent source• 1 x 42W (GX24q-3/T4)..........................
Ceiling mounted luminaires for direct halogen or fluorescentlighting with subtle indirect lighting creating a halo on the ceiling.
• dome shaped body/diffuser in spun aluminum availablein natural aluminum or charcoal grey
• polycarbonate diffuser encased in body to diffuse lamps• mounting to standard electrical junction boxes
For additional Nur versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Nur ceiling
halogen source• 1 x 250W (E26/T10 dbl. env.)....................
or
fluorescent source• 1 x 70W (GX24q-6/T4)..........................
16 15/16”43 cm
øø 3 15/16”
ø 10 cm
ø 21 11/16”ø 55 cm
11”28 cm
ø 3 15/16”ø 10 cm
ø
ø 14 3/16”ø 36 cm
ø
charcoal grey aluminum
eco design
75
Nur 1618 Hal suspensionNur 1618 FLU suspensionErnesto Gismondi 2008
Cable suspended luminaires providing direct halogen orfluorescent lighting with subtle indirect lighting.
• large deep domed diffuser in spun aluminum, available incharcoal grey or natural aluminum finish with sanded glassat top of dome
• ceiling canopy in steel with thermoplastic cover in grey• suspension cables in stainless steel• mounting to standard electrical junction boxes
For additional Nur versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Nur 1618 HAL suspension
halogen source• 2 x 500W (R7S/T3) supplied.............
Nur 1618 FLU suspension
fluorescent source• 4 x 42W (GX24q-4/T4)...........................
27 9/16”70 cm
ø 35 7/16”ø 90 cm
max 102 3/8”max 260 cm
ø 7 1/8”ø 18 cm
eco design
Nur 1618
Nur
Nur mini
Infini suspensionGerhard Reichert 2008
Infini suspension
fluorescent source• 2 x 28W (G5/T5)................................
Cable suspended luminaire providing direct and indirectdiffused lighting.
• body in transparent Polymethyl methacrylate (PMMA) withgreen edge color providing the high quality look of glass
• diffuser in opaline polycarbonate• interior ballast holder made from extruded aluminum with ametallic grey paint finish
• light distribution: 57% indirect and 43% direct• support cables in stainless steel supplied with grip-lockconnectors for quick height adjustment at installation
• ceiling feeder and canopy mounting to standard electricaljunction boxes and non-feed support canopy in steel mountingdirectly to rigid ceiling surface (hardware not supplied)
• equipped with thermally protected, class P, high power factor120V electronic fluorescent ballast
for additional information on this model, please refer to theArtemide Architectural Binder
47 5/8”121 cm
max 78” max 200 cm
2 3/8”6.1 cm
8 3/8”21.2 cm
eco design
76
77
Kalifa wallErnesto Gismondi 2008
Kalifa 59 wall
fluorescent source• 1 x 80W (G5/T5 HO)...........................
3 15/16”10 cm
2”5 cm
2
58 9/16”148.7 cm
Wall mounted luminaires for direct and indirect lighting.
• body in extruded aluminum with white or grey painted finishand 3/16” (0.4 cm) thick screen-printed tempered glass
• light distribution: 81% indirect and 19% direct• equipped with thermally protected, class P, high power factor120V electronic fluorescent ballast• white backplate provided to cover junction box• mounting to wall surface, over standard electrical junction box• for 277/347V electronic fluorescent ballast, dimmableelectronic ballast, and emergency lighting options, pleaseconsult your Artemide Sales Representative
for additional information on this model and matchingKalifa series, please refer to the Artemide Architectural Binder
ADA
Kalifa 23 wall
fluorescent source• 1 x 24W (G5/T5 HO)...........................
3 15/16”10 cm
3
2”5 cm
23 1/8”58.7 cm
5
ADA
eco design
78
Square wallA+A Cooren 2008
Square wall
halogen source• 1 x 300W (R7S/T3)...........................
or
fluorescent source• 1 x 18W (G24q-2/T4)..............................
6 3/4”17.1 cm
7 3/4”19.7 cm
1/2”1.3 cm
1 1/4”3.1 cm
Wall mounted luminaire for indirect halogen or fluorescent lighting.
• body in die-cast aluminum with matte white or light greypainted finish
• high efficiency reflector in anodized aluminum with lampglass protector on halogen version
• wall support bracket mounting to standard electricaljunction boxes
• fluorescent version equipped with thermally protected,class P, high power factor 120V electronic fluorescent ballast(277V optional)
for additional information on this model, please refer to theArtemide Architectural binder
matte white
eco design
79
Kanji wallEric Solé 2008
35 7/16”90 cm
63”160 cm
6 3/4”17.1 cm
3 1/8”8 cm
11”28 cm
3
3 1/8”8 cm
3 1/8”8 cm
6
6 3/4”17.1 cm
6 3/4”17.1 cm
Wall mounted luminaires for indirect halogen orfluorescent lighting.
• body in extruded aluminum with white painted finish• protective glass included for halogen versions• mounts to standard electrical junction boxes, direct wallattachment also required for longer models(hardware by others)
• equipped with thermally protected, class P, high power factor120V electronic fluorescent ballast (277V/347V optional)
for additional information on this model, please refer to theArtemide Architectural Binder
Kanji 11 wallhalogen source• 1 x 300W (R7S/T3)............................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
Kanji 35 wallfluorescent source• 1 x 55W (2G11/T5)..............................or• 1 x 80W (2G11/T5)............................
Kanji 63 wallfluorescent source• 1 x 80W (G5/T5)................................
eco design
82
Ariel AC large tableRon Rezek 2009
Table standing luminaire for diffused incandescent orfluorescent lighting.
• diffuser in three-tier opal white polypropylene• base and stem in steel with nickel painted finish• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• ballast incorporated in base for the fluorescent version• clear cord• optional table top bolt down
For additional Ariel versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Ariel AC large table
incandescent source• 1 x 100W (E26/A19)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
26 1/2”67 cm
ø 12”ø 30 cm
13 1/2”34 cm
ø 8 1/4”ø 21 cm
eco design
83
Bolo classic AC tablePeclar Nalbandian, Ron Rezek 2009
Table standing luminaire for diffused incandescent orfluorescent lighting.
• diffuser in handblown, ribbed opal white glass• base in polished chrome plated steel• on/off black rocker switch and two AC 3-prong outlets onbase for plug-in of personal electronics
• black cord without dimmer• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Bolo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Bolo classic AC table
incandescent source• 1 x 100W (E26/G30)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
9”23 cm
9”23 cm
ø 12 1/2”ø 32 cm
25”64 cm
8 3/4”23 cm
eco design
84
Bolo linen tablePeclar Nalbandian, Ron Rezek 2009
Bolo linen table
incandescent source• 1 x 100W (E26/G30)................................
ø 13”ø 33 cm
25”64 cm
10 1/2”27 cm
Table standing luminaire for diffused incandescent lighting.
• shade/diffuser in white linen fabric with whitepolypropylene backing
• base in polished aluminum• on/off pull switch with chrome plated pull grip• clear cord with optional in-line dimmer• optional table top bolt down
For additional Bolo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
85
Bolo linen AC tablePeclar Nalbandian, Ron Rezek 2009
Bolo linen AC table
incandescent source• 1 x 100W (E26/G30)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
ø 13”ø 33 cm
25”64 cm
10 1/2”27 cm
Table standing luminaire for diffused incandescent orfluorescent lighting.
• shade/diffuser in white linen fabric with whitepolypropylene backing
• base in polished chrome plated steel• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Bolo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
9”23 cm
9”23 cm
eco design
86
Dome 14 tableDome 14 AC tableErnesto Gismondi 2009
Dome 14 AC table
incandescent source• 1 x 100W (E26/A19)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
ø 14”ø 35.5 cm
28”71 cm
13”33 cmTable standing luminaires for direct and indirect diffused
incandescent or fluorescent lighting (AC version).
Dome 14 table• dome shaped diffuser in spun aluminum with naturalanodized brushed aluminum, anodized brushed charcoal,or matte white powder coated finish
• upper diffuser lens in molded frosted glass• base and stem in polished chrome finish• on/off pull switch with chromed steel grip• clear cord with optional in-line dimmer• optional table top bolt down
Dome 14 AC table• dome shaped diffuser in spun aluminum with naturalanodized brushed aluminum, anodized brushed charcoal,or matte white powder coated finish
• upper diffuser lens in molded frosted glass• base and stem in polished chrome finish• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Dome versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Dome 14 table
incandescent source• 1 x 100W (E26/A19)................................
ø 14”ø 35.5 cm
28”71 cm
13”33 cm
ø 8 1/4”ø 21 cm
matte white
brushed charcoal
brushed aluminum
eco design
87
88
Illusa small/large tableIllusa AC large tableRon Rezek, Guy Burr 2009
Illusa AC large table
incandescent source• 1 x 100W (E26/A19)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
Table standing luminaires for diffused incandescent orfluorescent lighting.
Illusa table small/large• diffuser in Tiffany-type white glass with antique bronzedmetal caning frame
• base and stem in antique bronzed steel• on/off pull switch with optional dimmer on cord forincandescent version
• on/off pull switch without dimmer on cord for fluorescent version• ballast incorporated in lampholder for fluorescent version• optional table top bolt down
Illusa AC table large• diffuser in Tiffany-type white glass with antique bronzedmetal caning frame
• base and stem in antique bronzed steel• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• black cord without dimmer• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Illusa versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
8”20 cm
8”20 cm
10”25.5 cm
20 1/2”52 cm
10”25 1/2 cm
10”25 1/2 cm
12”30.5 cm
24 1/2”62 cm
10”25 1/2 cm
10”25 1/2 cm
12”30.5 cm
24 1/2”62 cm
9”23 cm
9”23 cm
Illusa small table
incandescent source• 1 x 75W (E26/A19).........................................
or
fluorescent source• 1 x 18W (G24q-2/T4).....................................
Illusa large table
incandescent source• 1 x 100W (E26/A19).......................................
or
fluorescent source• 1 x 26W (G24q-3/T4).....................................
eco design
89
90
Jupe classic AC large tablePeclar Nalbandian, Guy Burr 2009
ø 11”ø 28 cm
23”58 cm
8 1/2”22 cm
9
Table standing luminaire for diffused incandescent orfluorescent lighting.
• diffuser in molded, ribbed, sanded glass• base, stem, and diffuser support in polished chrome plated steel• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• black cord without dimmer• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Jupe versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Jupe classic AC large table
incandescent source• 1 x 100W (E26/G30)................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
Jupe classic AC table large and linen AC table base
9”23 cm
9”23 cm
eco design
91
Jupe linen tableJupe linen AC tablePeclar Nalbandian, Guy Burr 2009
24 1/2”62 cm
9 1/2”24 cm
ø 13”ø 33 cm
Table standing luminaires for diffused incandescent or fluorescentlighting (AC version).
Jupe linen table• shade/diffuser in white linen fabric with whitepolypropylene backing
• base and socket cover in polished aluminum• stem in polished chrome plated steel• on/off pull cord switch with polished chrome plated steel grip• clear cord with optional in-line dimmer• optional table top bolt down
Jupe linen AC table• shade/diffuser in white linen fabric with whitepolypropylene backing
• base, stem, and diffuser support in polished chrome plated steel• on/off black rocker switch and two AC 3-prong outlets onbase for the plug-in of personal electronics
• black cord without dimmer• ballast incorporated in base for the fluorescent version• optional table top bolt down
For additional Jupe versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
24 1/2”62 cm
9 1/2”24 cm
ø 13”ø 33 cm
1
Jupe linen table
incandescent source• 1 x 100W (E26/G30)................................
Jupe linen AC table
incandescent source• 1 x 100W (E26/G30).................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
9”23 cm
9”23 cm
eco design
92
Bolo linen floorPeclar Nalbandian, Guy Burr 2009
Floor standing luminaire for diffused incandescent lighting.
• shade/diffuser in white linen fabric with whitepolypropylene backing
• base in polished aluminum• stem in chrome plated steel• on/off pull switch with chrome plated pull grip• clear cord with optional in-line dimmer
For additional Bolo versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Bolo linen floor
incandescent source• 1 x 100W (E26/G30)...........
ø 12 1/2”ø 32 cm
10 1/2”27 cm
61”155 cm
Dome 14 floorErnesto Gismondi 2009
Dome 14 floor
incandescent source• 1 x 100W (E26/A19).................................
ø 14”ø 35.5 cm
13”33 cm
61”155 cm
Floor standing luminaire for direct and indirect diffusedincandescent lighting.
• dome shaped diffuser in spun aluminum with naturalanodized brushed aluminum, anodized brushed charcoal,or matte white powder coated finish
• upper diffuser lens in molded frosted glass• base and stem in polished chrome finish• on/off pull switch with chromed steel grip• clear cord with optional in-line dimmer
For additional Dome versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
matte white
brushed charcoal
brushed aluminum
93
94
Jupe linen floorPeclar Nalbandian, Guy Burr 2009
Floor standing luminaire for diffused incandescent lighting.
• shade/diffuser in white linen fabric with whitepolypropylene backing
• base and socket cover in polished aluminum• stem and diffuser supports in chrome plated steel• on/off pull cord switch with polished chrome plated steel grip• clear cord with optional in-line dimmer
For additional Jupe versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Jupe linen floor
incandescent source• 1 x 100W (E26/G30).................................
61 1/2”156 cm
9 1/2”24 cm
ø 13”ø 33 cm
95
Bliss 13-26-38-50wall/ceilingMOODD 2008
Bliss 26 wall/ceiling
fluorescent source• 1 x 24W (G5/T5 HO)...........................
Wall or ceiling mounted architectural luminaires for direct andindirect fluorescent lighting.
• support body in extruded anodized natural aluminum• frontal fascia and side brackets in 1/4” aluminum plate withbrushed anodized finish or matte white powder coated finish,chrome plated finish also available for Bliss 13
• upper and lower diffusers in extruded frosted acrylic,in frosted glass for Bliss 13
• 120V electronic ballasts with 277V and dimmable optional• predisposed for “pig-tail” mounting or single gang/switchelectrical junction box mounting
• cover plate supplied for mounting to standard electricaljunction boxes
Bliss 13 wall/ceiling
fluorescent source• 1 x 42W (GX24q-4/T4)..........................
Bliss 50 wall/ceiling
fluorescent source• 1 x 54W (G5/T5 HO)...........................
Bliss 38 wall/ceiling
fluorescent source• 1 x 39W (G5/T5 HO)...........................
13”33 cm
4”10 cm
3 1/4”8 cm
26”66 cm
38”97 cm
50”127 cm
2
4”10 cm
3 1/4”8 cm
4”10 cm
3 1/4”8 cm
4”10 cm
3 1/4”8 cm
ADA ADA
ADAADA
brushed anodized aluminum matte white
chrome plated brushed anodized aluminum
eco design
96
Brick wallErnesto Gismondi 2008
Brick wall
fluorescent source• 1 x 26W (G24q-3/T4)................................or• 1 x 32W (GX24q-3/T4)...........................
11 5/8”30 cm
4”10 cm
4 1/4”11 cm
Wall mounted luminaire for indirect and diffusedfluorescent lighting.
• diffuser available in molded clear glass with inner chromedperforated steel lining or in frosted glass
• back plate in 1/8” chromed steel, mounting to standardelectrical junction boxes
ADA
frosted glass
clear glass with perforated reflector
eco design
97
Crescent half wallCrescent full wallGuy Burr 2009
Crescent full wall
incandescent source• 2 x 60W (E26/A19)..................................
or
fluorescent source• 1 x 36W (2G11/T4)............................
5”13 cm
22 3/4”25 cm
4”10 cm
Wall mounted luminaires for diffused incandescent orfluorescent lighting.
• diffuser in opal white handblown glass• die-cast end caps in polished chrome• wall back plate in white powder coated finish, mounting tostandard junction boxes
Crescent half wall
incandescent source• 1 x 75W (E26/A19)..................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
5”13 cm
4”10 cm
5
11 1/4”29 cm
ADA ADA
eco design
98
Dupla FLU single/double wallPeclar Nalbandian, Ron Rezek 2008
Wall mounted luminaire for direct and diffusedfluorescent lighting.
• body in die-cast aluminum with silver paint finish• diffuser in die-cast aluminum with etched whitehandblown glass
• 120/277V electronic fluorescent ballast integrated in lampholder• mounting to standard electrical junction boxes• optional toggle switch for Dupla single walls
For additional Dupla versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
4”10 cm
4”10 cm
4”10 cm
10”25 cm
4
Dupla FLU single wall
fluorescent source• 1 x 18W (G24q-2/T4)..............................
ADA ADA
15 1/2”39 cm
4”10 cm
4”10 cm
1
Dupla FLU double wall
fluorescent source• 2 x 13W (G24q-1/T4)..............................
eco design
FLU single wall
FLU double wall
100
Dupla FLU ceilingPeclar Nalbandian, Ron Rezek 2008
4”10 cm
4”10 cm
17”43 cm
Ceiling mounted luminaire for direct and diffusedfluorescent lighting.
• body in die-cast aluminum with silver paint finish• diffuser in die-cast aluminum with etched whitehandblown glass
• 120V or 277V fluorescent ballast integrated in lampholder• mounting to standard electrical junction boxes
For additional Dupla versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Dupla FLU ceiling
fluorescent source• 1 x 18W (G24q-2/T4)..............................
eco design
101
Illusa strip 12 wall/ceilingRon Rezek, Guy Burr 2008
Wall or ceiling mounted luminaire for diffused fluorescentlighting, particularly suited for bathroom mirror applications.
• diffuser in Tiffany-type white glass with antique bronzedmetal caning frame
• diffuser supporting plate in white powder coated finish• mounting to standard electrical junction boxes to centerof luminaire
For additional Illusa versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
12”31 cm
3 1/4”8.5 cm
3 1/4”8.5 cm
Illusa strip 12 wall/ceiling
fluorescent source• 1 x 18W (2G11/T5)...............................
ADA
eco design
102
Illusa wedge wallRon Rezek, Guy Burr 2008
Illusa wedge wall
fluorescent source• 1 x 26W (G24q-3/T4)..............................
11”28 cm
4”10 cm
8”20 cm
Wall mounted luminaire for diffused fluorescent lighting.
• diffuser in Tiffany-type white glass with antique bronzedmetal caning frame
• diffuser supporting plate in white powder coated finish• mounting to standard electrical junction boxes to centerof luminaire
For additional Illusa versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
ADA
eco design
103
Illusa square 18ceiling/wallRon Rezek, Guy Burr 2008
Illusa square 18 ceiling/wall
fluorescent source• 1 x 55W (GRY10q-3/T6/2D HO)................or• 2 x 24W (2G11/T5)............................or• 1 x 55W (2GX13/T5)...................................
18”46 cm
18”46 cm
4”10 cm
Ceiling or wall mounted luminaire for diffusedfluorescent lighting.
• diffuser in Tiffany-type white glass with antique bronzedmetal caning frame
• diffuser supporting plate in white powder coated finish• mounting to standard electrical junction boxes to centerof luminaire
For additional Illusa versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
ADA
eco design
104
Plat 17-22 ceiling/wallGuido Buratto 2008
Ceiling or wall mounted luminaires for direct diffusedfluorescent lighting.
• diffuser in white acrylic• outer body in spun aluminum with white or silver powdercoated finish
• outer body twists off for quick re-lamping• inner body in white powder coated steel• mounting to standard electrical junction boxes
Plat 22 ceiling/wall
fluorescent source• 1 x 55W (2GX13/T5)...................................or• 2 x 26W (GX24q-3/T4)................................or• 2 x 32W (GX24q-3/T4)...........................
ø 22”ø 56 cm
4”10 cm
ø
ADA
Plat 17 ceiling/wall
fluorescent source• 1 x 22W (2GX13/T5)...................................or• 1 x 32W (GX24q-3/T4)..........................or• 1 x 42W (GX24q-4/T4)...........................
ø 17”ø 43 cm
4”10 cm
ADA
silver
eco design
white
106
Solana surface ceiling/wallSolana recessed ceiling/wallGuido Buratto 2008
4 3/4”12 cm
ø 18 1/2”ø 47 cm
Ceiling or wall surface or recessed mounted luminaires fordiffused fluorescent lighting.
• surface or recessed mounting body in spun aluminum withinternal reflective white lacquer finish and external silvergrey powder coated finish
• surface body mounting to standard electrical junction boxes• recessed body mounting to rigid ceiling surfaces, requiringa ø 14 3/4” cutout, equipped with external steel ballastconnection box in galvanized steel
• diffuser in opal and frosted acrylic with supporting ring inlaser cut aluminum with silver powder coated finish
ø 18 1/2”ø 47 cm
4
3”8 cm
ADA ADA
Solana recessed ceiling/wall
fluorescent source• 1 x 55W (2GX13/T5)...................................or• 2 x 26W (GX24q-3/T4)..............................or• 2 x 32W (GX24q-3/T4)...........................
Solana surface ceiling/wall
fluorescent source• 1 x 55W (2GX13/T5)...................................or• 2 x 26W (GX24q-3/T4)..............................or• 2 x 32W (GX24q-3/T4)...........................
surface ceiling recessed ceiling
eco design
107
Jupe 8-11 ceilingPeclar Nalbandian, Guy Burr 2008
Ceiling mounted luminaire for diffused incandescent orfluorescent lighting.
• diffuser in molded, ribbed, white glass• ceiling canopy and diffuser supports in chromed steel• mounting to standard electrical junction boxes• ballast for fluorescent versions housed in ceiling canopy• optional anti-glare shield in frosted acrylic
For additional Jupe versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Jupe 11 ceiling
incandescent source• 1 x 100W (E26/G30)................................
or
fluorescent source• 1 x 32W (GX24q-3/T4)...........................
ø 11”ø 28 cm
11 1/2”29 cm
Jupe 8 ceiling
incandescent source• 1 x 60W (E26/A15)...................................
or
fluorescent source• 1 x 26W (GX24q-3/T4)...........................
8 1/2”22 cm
ø 8”ø 20 cm
eco design
108
Jetz wallball-cone-egg-tubeRon Rezek 2009
Wall mounted mini luminaires for indirect and diffusedincandescent lighting
• diffuser in etched handblown glass• diffuser shapes available: ball, cone, egg, and tube• etched glass colors available: white, lime, and goldenrod• wall bracket and canopy in nickel painted steel, mounting tostandard electrical junction boxes
For additional Jetz versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
5 3/4”15 cm
5
9 1/4”24 cm
6 1/4”16 cm
8 3/4”22 cm
5 3/4”15 cm
5
10 1/2”27 cm
5 3/4”15 cm
10 1/4”26 cm
Jetz ball wall
incandescent source• 1 x 60W (E12/G16 1⁄2)...............................
Jetz cone wall
incandescent source• 1 x 60W (E12/G16 1⁄2)................................
Jetz egg wall
incandescent source• 1 x 60W (E12/G16 1⁄2)...............................
Jetz tube wall
incandescent source• 1 x 60W (E12/G16 1⁄2)...............................
ball cone
egg tube
109
Tejido 6 round wall
incandescent source• 1 x 60W (E12/G16 1⁄2 clear).......................
ø 6 1/2”ø 17 cm
9”23 cm
Tejido 6 oval wallTejido 6 round wallPeclar Nalbandian, Guy Burr 2009
Tejido 6 oval wall
incandescent source• 1 x 75W (E26/A19 clear)...........................
ø 7 1/2”ø 18 cm
12”30 cmWall mounted luminaires for indirect and diffused incandescent
lighting with shadowing effects.
• oval or round shaped diffusers in hand woven strips ofnatural “alpacca”, a rust resistant metal alloy of copper,nickel, and zink
• wall bracket in steel with nickel painted finish• mounting to standard electrical junction boxes
For additional Tejido versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
oval round
110
Disk 12-18 suspensionGuido Buratto 2008
Disk 18 suspension
incandescent source• 1 x 100W (E26/G40) supplied...................
or
self-ballasted fluorescent source• 1 x 19W (E26/G40) supplied.....................
max 80”max 203 cm
ø 18”ø 46 cm
looking up at lamp
10”25 cm
8
Cable suspended luminaire for direct and diffused incandescentor self-ballasted fluorescent lighting.
• 12” or 18” disk diffuser in 1/4” solid aluminum plate withpolished finish, or in 1/4” plate glass with clear or frosted finish
• diffuser support/lampholder housing in die-cast aluminumwith polished finish
• supporting cable in stainless steel with black electrical cord(white or clear cord optional at no charge)
• ceiling canopy in chrome plated steel• black cord standard, with white or clear cord optional• luminaire design completed by a white globe incandescentor self-ballasted fluorescent lamp supplied with luminaire
Disk 12 suspension
incandescent source• 1 x 100W (E26/G25) supplied...................
or
self-ballasted fluorescent source• 1 x 14W (E26/G25) supplied....................
ø 12”ø 30 cm
looking up at lamp
max 78”max 198 cm
ø
8”20 cm
polished aluminum frosted glass
clear glass
eco design
111
2 1/2”6 cm
26”66 cm
2 1/2”6 cm
49”124 cm
2 1/2”6 cm
2 1/2”6 cm
2.5 Square strip 26-37-49 wallRon Rezek 2009
2.5 Square strip 37 wall
fluorescent source• 1 x 21W (G5/T5)................................or• 1 x 39W (G5/T5 HO)..........................
37”94 cm
4
2 1/2”6 cm
2 1/2”6 cm
Wall mounted luminaires for direct and diffusedfluorescent lighting.
• body in extruded aluminum with natural anodized or whitepowder coated finish
• end caps in die-cast aluminum in silver grey or white powdercoated finish
• diffuser in extruded acrylic with frosted finish• fixture supplied with a white or anodized cover plate formounting to standard electrical junction boxes, and also withfitting for optional “pig-tail” mounting without cover plate,directly to wall surface
For additional 2.5 Square versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
2.5 Square strip 26 wall
fluorescent source• 1 x 14W (G5/T5)................................or• 1 x 24W (G5/T5 HO)..........................
2.5 Square strip 49 wall
fluorescent source• 1 x 28W (G5/T5)................................or• 1 x 54W (G5/T5 HO)..........................
ADA ADA
ADA
eco design
112
2 Square 62-96.5 suspensionRon Rezek 2009
Cable suspended luminaires for linear direct or indirectfluorescent lighting.
• modules in extruded aluminum with natural anodized finish• modules end caps in die-cast aluminum with silver powdercoated finish
• diffusers in frosted acrylic• 62” and 96.5” available overall lengths of complete luminaire• 61” and 95.5” ceiling cable mounting points• fully adjustable grip lock steel cable suspension fittings• ceiling canopies in silver powder coated finish• standardly equipped with 120V electronic ballasts with277V and dimming options
For additional 2 Square versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
2 Square 96.5 suspension
fluorescent source direct• 2 x 39W (G5/T5 HO)..........................
fluorescent source indirect• 2 x 39W (G5/T5 HO)..........................
2 Square 62 suspension
fluorescent source direct• 1 x 54W (G5/T5 HO)..........................
fluorescent source indirect• 1 x 54W (G5/T5 HO)..........................
61”155 cm
hanging center
overall length
62”157.5 cm
max
72”
max
183
cm
2”5 cm
2”5 cm
9
95 1/2”242.6 cm
hanging center
overall length
96 1/2”245 cm
max
72”
max
183
cm
2”5 cm
2”5 cm
eco design
113
Cable suspended luminaires for linear direct, indirect, ordirect + indirect fluorescent lighting.
• modules in extruded aluminum with natural anodized finish• modules end caps in die-cast aluminum with silver powdercoated finish
• diffusers in frosted acrylic• 49”, 61”, and 95” available overall lengths ofcomplete luminaire
• 47.5”, 59.5”, and 93.5” ceiling cable mounting points• fully adjustable grip lock steel cable suspension fittings• ceiling canopies in silver powder coated finish• standardly equipped with 120V electronic ballasts with277V and dimming options
For additional 2.5 Square versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
2.5 Square 49-61-95suspensionRon Rezek 2009
2.5 Square 49 suspension
fluorescent source direct• 1 x 54W (G5/T5 HO)..........................
fluorescent source indirect• 1 x 54W (G5/T5 HO)..........................
fluorescent source direct + indirect• 1 x 39W (G5/T5 HO)..........................+• 1 x 54W (G5/T5 HO)..........................
2.5 Square 61 suspension
fluorescent source direct• 1 x 80W (G5/T5 HO)..........................
fluorescent source indirect• 1 x 80W (G5/T5 HO)..........................
fluorescent source direct + indirect• 1 x 54W (G5/T5 HO)..........................+• 1 x 80W (G5/T5 HO)..........................
2.5 Square 95 suspension
fluorescent source direct• 2 x 54W (G5/T5 HO)..........................
fluorescent source indirect• 2 x 54W (G5/T5 HO)..........................
fluorescent source direct + indirect• 2 x 39W (G5/T5 HO)..........................+• 2 x 54W (G5/T5 HO)..........................
overall length
49”124.5 cm
max
72”
max
183
cm
47 1/2”121 cm
hanging center
2 1/2”6.5 cm
2 1/2”6.5 cm
overall length
61”155 cm
max
72”
max
183
cm
59 1/2”151 cm
hanging center
2 1/2”6.5 cm
2 1/2”6.5 cm
o
overall length
95”241.3 cm
max
72”
max
183
cm
93 1/2”237.5 cm
hanging center
2 1/2”6.5 cm
2 1/2”6.5 cm
o
eco design
114
Peak 52-64-100 suspensionPaul Haigh 2009
Cable suspended luminaires for linear direct or direct + indirectfluorescent lighting.
• modules in extruded aluminum with natural anodized finish• modules end caps in die-cast aluminum with silver powdercoated finish
• upper and lower diffusers in frosted acrylic• 52”, 64”, and 100” available overall lengths ofcomplete luminaire
• 48”, 60”, and 96” ceiling cable mounting points• fully adjustable grip lock steel cable suspension fittings• ceiling canopies in silver powder coated finish• standardly equipped with 120V electronic ballasts with277V and dimming options
Peak downeco design
Peak up
115
Peak 64 suspension
fluorescent source direct peak up• 1 x 35W (G5/T5)................................or• 2 x 35W (G5/T5)..................................
fluorescent source dir. + ind. peak up• 2 x 35W (G5/T5)................................or• 3 x 35W (G5/T5)...................................
fluorescent source indirect peak down• 1 x 35W (G5/T5)................................or• 2 x 35W (G5/T5).................................
fluorescent source ind. + dir. peak down• 2 x 35W (G5/T5)................................or• 3 x 35W (G5/T5).................................
Peak 52 suspension
fluorescent source direct peak up• 1 x 28W (G5/T5)................................or• 2 x 28W (G5/T5)................................or• 1 x 54W (G5/T5 HO)..........................or• 2 x 54W (G5/T5 HO)..........................
fluorescent source dir. + ind. peak up• 2 x 28W (G5/T5)...............................or• 3 x 28W (G5/T5)................................or• 2 x 54W (G5/T5 HO).........................or• 3 x 54W (G5/T5 HO).........................
fluorescent source indirect peak down• 1 x 28W (G5/T5)...............................or• 2 x 28W (G5/T5)...............................or• 1 x 54W (G5/T5 HO).........................or• 2 x 54W (G5/T5 HO).........................
fluorescent source ind. + dir. peak down• 2 x 28W (G5/T5)...............................or• 3 x 28W (G5/T5)...............................or• 2 x 54W (G5/T5 HO)..........................or• 3 x 54W (G5/T5 HO).........................
Peak 100 suspension
fluorescent source direct peak up• 2 x 28W (G5/T5)................................or• 4 x 28W (G5/T5)................................or• 2 x 54W (G5/T5 HO)..........................or• 4 x 54W (G5/T5 HO)..........................
fluorescent source dir. + ind. peak up• 4 x 28W (G5/T5)...............................or• 6 x 28W (G5/T5)................................or• 4 x 54W (G5/T5 HO).........................or• 6 x 54W (G5/T5 HO).........................
fluorescent source indirect peak down• 2 x 28W (G5/T5)...............................or• 4 x 28W (G5/T5)...............................or• 2 x 54W (G5/T5 HO).........................or• 4 x 54W (G5/T5 HO).........................
fluorescent source ind. + dir. peak down• 4 x 28W (G5/T5)...............................or• 6 x 28W (G5/T5)...............................or• 4 x 54W (G5/T5 HO)..........................or• 6 x 54W (G5/T5 HO).........................
3 3/4”9.5 cm
4 3/4”12 cm
48”122 cm
hanging center
overall length
51 3/4”131.5 cm
Peak up
max
72”
max
183
cm
3 3/4”9.5 cm
4 3/4”12 cm
60”152.5 cm
hanging center
overall length
63 3/4”162 cm
Peak up
max
72”
max
183
cm
3 3/4”9.5 cm
4 3/4”12 cm
96”244 cm
hanging center
overall length
99 3/4”253 cm
Peak up
max
72”
max
183
cm
overall length
51 3/4”131.5 cm
Peak down
48”122 cm
hanging center
max
72”
max
183
cm
3 3/4”9.5 cm
4 3/4”12 cm
overall length
63 3/4”162 cm
Peak down
60”152.5 cm
hanging centerm
ax72
”m
ax18
3cm
3 3/4”9.5 cm
4 3/4”12 cm
o
overall length
99 3/4”253 cm
Peak down
96”244 cm
hanging center
max
72”
max
183
cm
3 3/4”9.5 cm
4 3/4”12 cm
116
Rala 54-100 suspensionRon Rezek 2008
Cable suspended luminaires for linear indirect or indirect+directlinear fluorescent lighting with high output lamping anddimming options.
• module in extruded aluminum with natural anodized finish orlow gloss white powder coated finish
• module end caps in die-cast aluminum with silver or whitepowder coated finish
• 54” or 100” luminaire available lengths(54” or 102” actual overall length)
• direct lighting module diffuser in frosted acrylic• fully adjustable griplock steel cable suspension fittings• ceiling canopies in white or silver powder coated steel• standardly equipped with 120V electronic ballasts(277V optional), dimmable and non dimmable
Rala 54 suspension indirect HO
fluorescent source• 2 x 54W (G5/T5 HO).........................
Rala 54 suspension indirect+direct
fluorescent source• 3 x 28W (G5/T5)...............................
Rala 54 suspension indirect+direct HO
fluorescent source• 3 x 54W (G5/T5 HO).........................
Rala 100 suspension indirect HO
fluorescent source• 4 x 54W (G5/T5 HO).........................
Rala 100 suspension indirect+direct
fluorescent source• 6 x 28W (G5/T5)...............................
Rala 100 suspension indirect+direct HO
fluorescent source• 6 x 54W (G5/T5 HO).........................
92”233.5 cm
hanging centers
max 72”max 183 cm
overall lengths102”
259 cm
8”20 cm
2 3/4”7 cm
44”112 cm
hanging centers
overall lengths54”
137 cm
max 72”max 183 cm
2
2 3/4”7 cm
8”20 cm
Rala 100 indirect+direct, anodized
eco design
Rala 54 indirect, anodized Rala 54 indirect+direct, white
Rala 54 indirect+direct, white
117
118
Scalene-EquilateralsuspensionPeclar Nalbandian, Ron Rezek 2008
Cable suspended architetural luminaires deriving from the2.5 Square system.
• diffused fluorescent lighting - direct, indirect, or direct + indirect• fully wired and assembled modules in extruded aluminumof 0.075” / .16 cm wall thickness, with natural anodizedfinish and corner connectors in die-cast aluminum
• diffusers in frosted acrylic• aircraft cable suspension mounting assembly with fullyadjustable grip lock fitting
• electrical feed canopy mounting to standard electricaljunction boxes
• rigid stem suspension mounting optional• modules are standardly equipped with thermally protected,class P, high power factor 120V electronic ballasts, with277V optional at no up-charge
• for dimmable electronic ballast options, consult the localArtemide Sales Representative for applicable lampingchanges and up-charges
• for custom finishes, consult the local Artemide SalesRepresentative for minimum quantities and up-charges
• luminaires are shipped fully assembled, with mountingpoints template for ease of ceiling installation
Scalene suspension
fluorescent source direct• 1 x 24W (G5/T5 HO).........................+• 1 x 54W (G5/T5 HO).........................+• 1 x 80W (G5/T5 HO).........................
fluorescent source indirect• 1 x 24W (G5/T5 HO).........................+• 1 x 54W (G5/T5 HO).........................+• 1 x 80W (G5/T5 HO).........................
fluorescent source direct + indirect• 1 x 24W (G5/T5 HO).........................+• 1 x 54W (G5/T5 HO).........................+• 1 x 80W (G5/T5 HO).........................+• 2 x 54W (G5/T5 HO).........................
Equilateral 28 suspension
fluorescent source direct• 3 x 24W (G5/T5 HO).........................
fluorescent source indirect• 3 x 24W (G5/T5 HO).........................
Equilateral 40 suspension
fluorescent source direct• 3 x 39W (G5/T5 HO).........................
fluorescent source indirect• 3 x 39W (G5/T5 HO).........................
fluorescent source direct + indirect• 3 x 39W (G5/T5 HO).........................+• 3 x 24W (G5/T5 HO).........................
Equilateral 52 suspension
fluorescent source direct• 3 x 54W (G5/T5 HO).........................
fluorescent source indirect• 3 x 54W (G5/T5 HO).........................
fluorescent source direct + indirect• 3 x 54W (G5/T5 HO).........................+• 3 x 39W (G5/T5 HO).........................
Equilateral 64 suspension
fluorescent source direct• 3 x 80W (G5/T5 HO).........................
fluorescent source indirect• 3 x 80W (G5/T5 HO).........................
fluorescent source direct + indirect• 3 x 80W (G5/T5 HO).........................+• 3 x 54W (G5/T5 HO).........................
overall width22 1/2”57 cm
overall length64”
163 cm
view from bottom
mounting center60 1/2”154 cm
mounting center48 1/2”123 cm
mounting center25”
64 cm
view from top
2 1/2”6.5 cm
2 1/2”6.5 cm
72”183 cm
overall sizes28 1/2”, 40”, 52”, 63 3/4”
72, 102, 132, 162 cm
view from bottom
view from top
mounting centers25 1/4”, 36 3/4”, 48 3/4”, 60 1/4”
64, 93, 124, 153 cm
2 1/2”6.5 cm
2 1/2”6.5 cm
72”183 cm
Equilateral Scalene
eco design
119
Equilateral direct+indirect
Scalene direct
120
Dupla outdoor FLUceilingsingle/double wallPeclar Nalbandian, Ron Rezek 2009
Wall and ceiling mounted luminaires for diffused fluorescentlighting, suitable for applications in outdoor wet locations.
• body in die-cast aluminum with medium grey powdercoated finish
• diffuser in etched white handblown glass• fully gasketed, with hardware in stainless steel• 120V or 277V electronic ballast integrated in lampholder• mounting to standard electrical junction boxes• UL listed for wet locations
For additional Dupla versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
ADA
15 1/2”39 cm
4”10 cm
4”10 cm
Dupla FLU double wall
fluorescent source• 2 x 13W (G24q-1/T4)..............................
4”10 cm
4”10 cm
4
17”43 cm
Dupla FLU ceiling
fluorescent source• 1 x 18W (G24q-2/T4)..............................
4”10 cm
4”10 cm
4”10 cm
10”25 cm
4
Dupla FLU wall
fluorescent source• 1 x 18W (G24q-2/T4)..............................
ADA
ceiling FLU medium grey finish
eco design
double wall FLU medium grey finish
122
Lyra outdoor 11-14wall/ceilingKolbe + Sekles 2009
Wall or ceiling mounted luminaires for direct and diffusedincandescent or fluorescent lighting, suitable for applications inoutdoor wet locations, available in two sizes.
• body composed of multi-layered discs of die-cast aluminumwith outdoor type powder coated finish, matte white,black, or medium grey
• diffuser in heavy pressed white etched glass with silicon gasket• concealed back plate in steel with white powder coatedfinish, mounting to standard junction boxes
• all assembly hardware in stainless steel• UL listed for wet locations
For additional Lyra versions please refer to the2007-2008 Artemide Master Catalog or visitour website artemide.us
Lyra 14 ceiling/wall
incandescent source• 2 x 60W (E26/A19)...................................
or
fluorescent source• 2 x 26W (G24q-3/T4)..............................
ø 14”ø 36 cm
4”10 cm
ADA
Lyra 11 ceiling/wall
incandescent source• 1 x 60W (E26/A19)...................................
or
fluorescent source• 1 x 26W (G24q-3/T4)..............................
4”10 cm
ø 11”ø 28 cm
ADA
white black
eco design
123
medium grey
128
AAttllaannttaa 1011 Monroe Dr.Atlanta, GA 30306T 404-881-6567F [email protected]
HHoonnoolluulluu1250 Kapiolani Blvd.Honolulu, HI 96814T 808-956-1250F [email protected]
MMiinnnneeaappoolliissInternational Market Square275 Market St.Minneapolis, MN 55405T 612-340-5310F [email protected]
SSaann DDiieeggoo301 4th Ave.San Deigo, CA 92101T 619-232-6072F [email protected]
WWaasshhiinnggttoonn,, DD..CC..415 8th Street NWWashington, D.C. 20004T 202-783-0133F [email protected]
BBoossttoonn343 Congress St.Boston, MA 02210T 617-423-1450F [email protected]
LLaass VVeeggaass3901 West Russel Rd.Las Vegas, NV 89118T 702-589-5747F [email protected]
NNeeww YYoorrkk46 Greene StreetNew York, NY 10013T 212-925-1588F [email protected]
SSaann FFrraanncciissccoo855 Montgomery St.San Francisco, CA 94133T 415-393-9955F [email protected]
TThhee AArrtteemmiiddee OOnnlliinnee SSttoorreewwwwww..aarrtteemmiiddeessttoorree..ccoomm
CChhiiccaaggoo223 West Erie St. 1SChicago, IL 60654T 312-475-0100F [email protected]
LLooss AAnnggeelleess9006 Beverly Blvd.West Hollywood, CA 90048T 310-888-4099F [email protected]
PPhhiillaaddeellpphhiiaa232 North 2nd St.Philadelphia, PA 19106T 215-733-9877F [email protected]
SSeeaattttllee310 Occidental Ave. S.Seattle, WA 98104T 206-903-1511F [email protected]
aarrtteemmiiddee..uuss
Headquarters, National Sales & Customer Service Center, 1980 New Highway, Farmingdale, NY, 11735T. 631-694-9292 • F. 631-694-9275 • Toll Free 1-877-Art-9111 • email: [email protected] Stores and Customer Service Centers • Online Store
DDaallllaassDallas Design District1617 Hi Line Dr., Suite 470Dallas, TX 75207T 214-747-8344F [email protected]
MMiiaammii277 Giralda Ave.Coral Gables, FL 33134T 305-444-5800F [email protected]
PPhhooeenniixx (Area Sales Office Only)3029 North AlmaSchool Rd. 107-30 Chandler, AZ 85224T/F 480-292-9077M [email protected]
SStt.. LLoouuiiss4727 McPherson Ave.St. Louis, MO 63108T 314-361-0107F [email protected]
Artemide was founded by Ernesto Gismondi andSergio Mazza in 1960. The ongoing commitmentto research and technological innovation combinedwith the collaboration of the best designers fromaround the world joined with the ongoing advertisingand outstanding relationship with the industry’smedia firms have made Artemide the best knownlighting brand in the world synonymous withDesign, Light, and Made in Italy.
In almost a half a century of business andentrepreneurial experiences, a surprising commoncharacteristic is reviled. Artemide products do notconform to traditions, trends, fads, and a fashion atthe moment. This rouge behavior defines theArtemide experience which is the exhaustingdesire to find solutions to the human demand forlighting, even if still unexpressed and unconscious.The individual is constantly placed at the centerof the project. Formal and aesthetic needs,technological innovations, individual and collectivetalents have been, are, and always will bededicated to this purpose. The Human Light:everywhere in the world, the light of Artemide forthe wellness of man.
For the complete and most up-to-date selection ofArtemide, Artemide Architectural, and Rezek models,please visit our website @ artemide.us
Please contact your local Sales Representative,Area Sales Manager, or your nearest ArtemideFlagship Store to inquire about our Architecturalbinder which is available to architects, designers,and lighting professionals.
artemide.us