WELCOME

Office Address -: Art floor Manisha Housing Society Sector 24 d/3,

Nigdi Pradhikaran, Pune-411044.

: 9689907152 / 8308771241 / 8379025574

: info@artfloor.co.in

: www.artfloor.co.in

Art Floorflooringsunlimited

PU Concrete

Polyurethane concrete flooring

High abrasion resistanceHigh impact and chemicalresistanceWater-based and hence VOCcompliantShort pot lifeAvailable in limited shade

••

•

••

EPOXY FLOORINGS

Cipoxy series represent products based on Bisphenol A based epoxide resin andcuring agents like polyamido amines and cyclo aliphatic amines.

Features :

••

•

•

•

•

•

Excellent adhesionExcellent gloss, unmatched so farSelf leveling propertiesGood chemical resistanceFood grade, tested at CFTRI, MysoreSuitable for pharma & food processing industriesMoisture insensitive

EPU FLOORINGS

The new generation EPU based floor toppings offer excellent abrasion resistance,flexibility, chemical resistance and fast curing properties. EPU is a multi polymer,hybrid of epoxy and PU, where the functional properties of both the products arecombined to impart the optimum properties. It scores over conventional epoxies aswell as polyurethanes in terms of performance. Its end use applications includeautomobile plants, pharma, food processing industries, chemical plants etc.

Features :

••

•

•

•

•

•

•

Excellent adhesionInsensitive to moistureHighly flexibleExcellent abrasion and impact resistanceExcellent gloss and self levelling propertiesGood chemical resistance. No cracks on jointsFlexo hard and Fast settingNo bubbles

PU FLOORINGS

The PU coatings, aromatic as well as aliphatic to give the best abrasion andchemical resistant coatings. These are reaction products of NCO terminatedadducts and OH terminated polyols like polyesters and polyethers.

Features :

••

•

•

•

•

•

Excellent abrasion resistanceExcellent chemical resistanceExcellent impact resistanceAvailable in matt finishesSuitable for engg industriesSuitable as CRF (chemical resistant floorings)Sensitive to moisture

ESD FLOORINGS

Static control flooring is defined as a flooringcharges by grounding personnel, equipment orfloor surface or that controls the generation

system that can drain staticother objects contacting theand accumulation of static

charges. There are two categories according to ASTM F-150-98 : Conductive &Static dissipative.

Conductive Floor has a resistance of 2.5 x 104–106 ohms per 3 ft. It can drainstatic charge dissipating a 5000-volt charge to zero in 0.05 seconds.

Static Dissipative floor has a resistance of 106-109 ohms per 3 ft. It can drainstatic charge dissipating a 5000- volt charge to zero in less than 0.2 seconds.

ESD FLOORINGS - advantages

•

•

•

•

•

•

•

•

Higher mechanical properties than concrete.

Durable.

Constant level of conductivity.

Low maintenance.

Superior chemical resistance.

Seamless.

Available in attractive shades.

Available in conductive and static-dissipative

forms.

Meets EOS/ESD standard 7.1 or NFPA 99 A

guide.

•

Weight loss after 1000 Cycles :

Abrasion resistance (wear & tear)

1 kg load, 1000 revolutions, CS17 wheel

Epoxy floorings 70 – 75 mg loss

EPU floorings 30 – 40 mg loss

PU floorings 20 – 30 mg loss

EP-PU floorings 10 – 15 mg loss

ESD floorings 30 – 40 mg loss

PU concrete floorings 65 – 70 mg loss

Green floors 140-150 mg loss

Poly aspartic floorings 50 – 55 mg loss

One-day floorings 50 – 55 mg loss

Densi Polished floors ---

Deck coatings ---

Dirt can easily be rem

Dust proof

oved by normal dry or wet cleaning.

Epoxy floorings Yes

EPU floorings Yes

PU floorings Yes

EP-PU floorings Yes

ESD floorings Yes

PU concrete floorings Yes

Green floors Yes

Poly aspartic floorings Yes

One-day floorings Yes

Densi Polished floors Yes

Deck coatings Yes

Chemical resistance

Epoxy floorings Good

EPU floorings Good

PU floorings Very good

EP-PU floorings Fair

ESD floorings Good

PU concrete floorings Very good

Green floors Fair

Poly aspartic floorings Good

One-day floorings Very Good

Densi Polished floors Poor

Deck coatings Good

Cipoxy EPN Excellent