Art and science of lighting
-
Upload
ameeshi-goenka -
Category
Design
-
view
54 -
download
2
Transcript of Art and science of lighting
Art and Science of Lighting LED Experimentation
Ameeshi Goenka
PDP 302
Drawing
Process
1) Cut the pieces for the wooden frame. Stick and nail them to complete it. Paint it.
2) Make a rectangular box with handmade paper (don’t stick it yet). Cut out the letters carefully that is to be lit. Paint it. Stick gateway sheet behind the letters to give a diffused light effect.
3) Connect LED strip to an adapter and connect a power source to the adapter. Stick the LED strip on the flap below the cut out part along its length then take it up to the flap above the cut out part and continue along the length and bring it back down.
4) Make a cut to provide for the frame supports to pass through. Fold the rectangular box and stick it.
5) Fix the luminaire onto the frame and your bar counter lighting fixture is ready.
Process Pictures
Final Pictures
In a dark space.
Final Pictures
In a lit up space.
Thank you