ArmorCote Polyolefin Coated U-bolts

CCI Pipeline SystemsPipe Protection Products

The ArmorCote™ u-bolt coating has evolved from de-cades of proven technology. The cross-linked polyolefin material provides a coating with extremely high com-pressive strength and tremendous abrasion resistance.

ArmorCote™ has a low coefficient of friction that allows for pipe movement without damage to the pipe coating. ArmorCote™ is a unique thermoplastic that is UV stabi-lized to maintain the integrity of the product even under prolonged exposure to direct sunlight.

Unlike minimum millage dipped coatings or hand wrapped rubber applications, ArmorCote™ resists tear-ing and will not unravel over time.

In 1984, we introduced this seamless cross-linked poly-olefin technology on pipe hanger applications in the off-shore construction market. We’re still here, but more importantly, so are our coatings.

CCI PIPELINE SYSTEMS, LLC

Tele: (281) 350-2100 Fax: (281) 288-6261

Tele: (337) 332-5808 Fax: (337) 332-5809

HOUSTON, TXBREAUX BRIDGE, LA

Website: www.ccipipe.com • Email: sales@ccipipe.com1058 O’Neal Drive • Breaux Bridge, LA 70517

800-867-2772

Representative

PropertiesPhysical

Tensile StrengthElongation

Heat Aging(168 Hrs./121º C)

Tensile StrengthElongation

Heat Shock

Low Temp. Flexibility(4 Hrs./55º C)

Specific GravityTempurature Limitation

Value

1500 PSI Min.300% Min.

150 PSI Min.300% Min.

No Cracks, Flow, or Blisters

No Cracking

0.96200º F

Test Method

ASTM D412ASTM D412

ASTM D2671ASTM D2671

ASTM D2671

ASTM D2671

ASTM D792

Chemical

Water Absorbtion

Corrosive Effect(16 Hrs./175)

Fluid Resistance(24 Hrs./25)

Hydraulic Fluid(MIL-H-5606C)

TensileElongation

Lubrication Oil(MIL-L-7808G)

TensileElongation

Diesel Fuel(MIL-L-23699)

TensileElongation

Value

0.20%

Pass

90% Retained Min.90% Retained Min.

90% Retained Min.90% Retained Min.

90% Retained Min.90% Retained Min.

Test Method

ASTM D570

ASTM D2671Copper Rod

ASTM D412ASTM D412

ASTM D412ASTM D412

ASTM D412ASTM D412

One-eighth inch thick neoprene or nitrile wear pads are die cut, allowing the legs of the fastener to retain the pad during installation.

Half-round thermoplastic wear pads provide optimum support, minimizing the point of contact and reducing crevice corrosion.

Pipe Support PadsStock items include hot dipped galvanized, Grinnell 137 long tangent u-bolts, each supplied with 4-heavy hex nuts and a neoprene die cut wear pad.Stainless steel, electro-plated glavanized, Teflon or Xylan coated are also available. ArmorCote™ can also be applied to customer supplied u-bolts or specialty fasteners.

•

•

•

1/8” thick Neoprene or Nitrile.

Half-round Thermoplastic