THALEIAImportant! please read these InstructIons carefully.

HARDWIRE Install by a qualified electrician

InstructIons and InstallatIon for models:•ABL013 •ABL016•ABL014 •ABL017•ABL015

Bunker Light series

CPIN002773

ABL013

ABL014

ABL015

ABL016

ABL017

Arlec guarantees this product in accordance with the Australian Consumer Law.

Arlec also warrants to the original first purchaser of this product (“you”) from a retailer that this product will be free of defects in materials and workmanship for a period of 12 months from the date of purchase; provided the product is not used other than for the purpose, or in a manner not within the scope of the recommendations and limitations, specified by Arlec, is new and not damaged at the time of purchase, has not been subjected to abuse, misuse, neglect or damage, has not been modified or repaired without the approval of Arlec and has not been used for commercial purposes (“Warranty”).

If you wish to claim on the Warranty, you must, at your own expense, return the product, and provide proof of original purchase and your name, address and telephone number, to Arlec at the address below or the retailer from whom you originally purchased the product within 12 months from the date of purchase.

Arlec will (or authorise the retailer to) assess any claim you may make on the Warranty in the above manner and if, in Arlec’s reasonable opinion, the Warranty applies, Arlec will at its own option and expense (or authorise the retailer to) replace the product with the same or similar product or repair the product and return it to you or refund the price you paid for the product. Arlec will bear its own expenses of doing those things, and you must bear any other expenses of claiming on the Warranty.

The Warranty is in addition to other rights and remedies you may have under a law in relation to the product to which the Warranty relates.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Arlec Australia Pty. Ltd. ACN 009 322 105 (“Arlec”) gives the Warranty. Arlec’s telephone number, address and email address are:

Customer Service: (03) 9982 5111 New Zealand Toll Free: 0800 003 329

Building 3, 31 – 41 Joseph Street, Blackburn North, Victoria, 3130 Blackburn North LPO, P.O. Box 1065, Blackburn North, 3130 Email: custservice@arlec.com.au

Warranty

4

CPIN002773

3

Step 2Drill the wall to take suitable mounting screws.

• Care should be taken to avoid drilling or screwing into concealed electrical wiring

• For solid brick we suggest that you use screws and masonry plugs. Fix the mounting bracket to the wall, leading the supply cable through the cable entry of the mounting bracket.

Step 3Wire the unit in accordance with Fig. 2. Double check wiring connections. Fix supplied sleeve over active and neutral wires. Fit the earth wire to the earth screw on the body – ensure the toothed washer is against the painted surface and tighten the screw.

(NOTE: The luminaires must be earthed)

Step 4Tighten both screws on the lampholder terminal.

Step 5Ensure wiring does not interfere with refitting of diffuser and front trim. Push back excess through cable entry.

Step 6Insert light globe into fitting.

Step 7 Refit diffuser and front guard. Ensure rubber gasket is correctly in place.

• Always switch off mains supply before servicing or cleaning of the luminaire or changing the lamp. Allow the luminaire to cool before handling if it has been operating.

• Replace only with E27 bulbs of maximum wattage no greater than that marked on the interior of the lamp fitting. Compact fluorescent bulbs are suitable for use.

• To avoid dust build up, wipe lightly with a damp cloth as required.

• Care should be taken when cleaning to prevent scratching. A soft cloth or fine-hair brush should be used together with a non-abrasive cleaner.

• Do not use solvents or abrasive cleaners on any part of your light.

2

Arlec Bunker Lights are robust weatherproof lamps suitable for permanent indoor or outdoor use. They have aluminium alloy die-cast bodies and glass diffusers, and durable powder coated finish.

WarNiNg: it is illegal for persons other than licensed electrician or persons authorised by legislation, to work on the fixed wiring of any electrical installation.

iMPOrTaNT: Ensure that aLL electrical connections are tight with no loosed strands.

• It’s the installer’s opportunity to consider the fire risk and take appropriate precautions.

• Input voltage – 240V 50Hz AC.

• Check product label for bulb type and maximum wattage. (E27, 60 watt maximum for small bunker lights. 100 watt maximum for large bunker lights. Suitable for use with compact fluorescent bulbs)

• The luminaire must not, under any circumstances, be covered with any insulation materials or be installed close to flammable materials.

• Ensure electricity is switched off at the mains before commencing installation or maintenance.

• Suitable for mounting on normally flammable surfaces.

• Weatherproof rating IP54

Step 1Remove front guard and diffuser from main body.

Position main body against wall and mark screw positions. Make allowance in positioning for the cable to wire the light to enter through the cable entry hole adjacent to the lampholder.

InStaLLatIOn InFOrMatIOn

IntrODUCtIOn

USer InFOrMatIOn

MaIntenanCe

CPIN002773

active Wire

Neutral Wire

Lampholder Terminal Screws

Earth Wire

Screw

Diffuser

Rubber seal fitted around rim of diffuser

Mounting Screw

Masonry Plugs

Main Body

ES globe (not supplied)

Front guard (style varies according to model)

Cable Entry Hole

with grommetFit fibreglass sleeve supplied over wire to lampholder

Figure 1.

Figure 2.