ARINC 429 RX MODUL - SET GmbH RX 429 module PXI System or Receiver Isolated 18-36V Receiver Receiver...
2
National Intruments CompactRIO Module SET GmbH August-Braun-Straße 1 D-88239 Wangen/Allgäu Telefon +49 75 22 916 87-600 Telefax +49 75 22 916 87-899 [email protected] www.smart-e-tech.de SET GmbH August-Braun-Straße 1 D-88239 Wangen/Allgäu Phone +49 75 22 916 87-600 Fax +49 75 22 916 87-899 [email protected] www.smart-e-tech.de ARINC 429 RX MODUL cRIO Modul DESCRIPTION Avionic devices ARINC TX 429 module ARINC RX 429 module PXI System or Receiver Isolated 18-36V Receiver Receiver Receiver ARINC Controller TYPICAL APPLICATIONS: Functional testing of prototype Fault analysis of existing systems Data communication analysis Signal bus recording Our ARINC RX module processes both high-speed and low-speed ARINC signals on four autonomous receiver channels. In addition to its wide supply voltage range from 18V - 36V the 9429RX module is characterised by its electrical isolation between the cRIO rack and the ARINC interface. The integrated self-test function as well as the protocol checking of the module ensure not only reliable operation in rough environments, but also make the cRIO ARINC module series a valuable analysis aid. The 9429RX module can be used both in the NI cRIO real-time enviro- ment and in an NI R-series expansion chassis with PCI/PXI FPGA card. In addition to all the drivers required for your cRIO/FPGA system the scope of delivery naturally also includes LabVIEW/TestStand integrati- on examples.
Transcript of ARINC 429 RX MODUL - SET GmbH RX 429 module PXI System or Receiver Isolated 18-36V Receiver Receiver...
National Intruments CompactRIO Module
SET GmbH August-Braun-Straße 1 D-88239 Wangen/Allgäu
Telefon +49 75 22 916 87-600 Telefax +49 75 22 916 87-899
SET GmbH August-Braun-Straße 1 D-88239 Wangen/Allgäu
Phone +49 75 22 916 87-600 Fax +49 75 22 916 87-899
ARINC 429 RX MODULcRIO Modul
DESCRIPTION
Avionic devices
ARINC TX429 module
ARINC RX429 module
PXI Systemor
Receiver
Isolated
18-36V
Receiver
Receiver
Receiver
ARINCController
TYPICAL APPLICATIONS:
Functional testing of prototype
Fault analysis of existing systems
Data communication analysis
Signal bus recording
Our ARINC RX module processes both high-speed and low-speed ARINC signals on four autonomous receiver channels.
In addition to its wide supply voltage range from 18V - 36V the 9429RX module is characterised by its electrical isolation between the cRIO rack and the ARINC interface.
The integrated self-test functionas well as the protocol checking ofthe module ensure not only reliable operation in rough environments,but also make the cRIO ARINC moduleseries a valuable analysis aid.
The 9429RX module can be usedboth in the NI cRIO real-time enviro-ment and in an NI R-series expansionchassis with PCI/PXI FPGA card.
In addition to all the drivers requiredfor your cRIO/FPGA system thescope of delivery naturally also includes LabVIEW/TestStand integrati-on examples.
SET GmbH August-Braun-Straße 1 D-88239 Wangen/Allgäu
National Intruments CompactRIO Module
SPECIFICATIONS
70,5 23
988
,1 61,5
18,8
6
13
10
max
DC
8,5
ORDERING INFORMATIONEN
Description
9429 RX 85076
Designation Order No.
4x ARINC RX low-speed / high-speedStandard
TECHNICAL DATA
Power supply: 18-36V
Power consumption: 50mA
Electrical isolation: 100 V
Data rates:(low-/highspeed)
10kb ... 110kb(auto detection)
Connection: 10-pin screw terminal
Input voltage range:
Input impedance: 300kOhm
Operating temperature range: -40°C ... +70°C
Storage temperature: -40°C ... +85°C
±12 V
