ArcSDE 9.1 System Requirements - ArcGIS

140
ArcSDE 9.1 System Requirements This PDF contains system requirements information, including hardware requirements, best performance configurations, and limitations, for ArcSDE 9.1. HP HP-UX 11i (11.11) PA-RISC o IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 4a o Informix Dynamic Server 10.00 HC5 o Informix Dynamic Server 9.40 HC3 o Oracle 10g (64 bit) 10.1.0.3.0 o Oracle 10g R2 (64 bit) 10.2.0.2.0 o Oracle 8i (32 bit) 8.1.7.0.0 o Oracle 9i (64 bit) 9.2.0.3.0 HP HP-UX 11i (11.23) PA-RISC o Oracle 9i (64 bit) 9.2.0.7.0 HP TRU64.5.1a o Oracle 8i (64 bit) 8.1.7.0.0 o Oracle 9i (64 bit) 9.2.0.3.0 HP TRU64.5.1b o Oracle 9i (64 bit) 9.2.0.3.0 IBM AIX 5.1 o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a o IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 6a o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2 o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1 o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2 o Informix Dynamic Server 9.40 UC3 o Oracle 8i (32 bit) 8.1.7.0.0 o Oracle 9i (64 bit) 9.2.0.3 IBM AIX 5.2.0.0 o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1 o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2 o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 4 o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1 o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2 o Informix Dynamic Server 10.00 UC5 o Oracle 10g (64 bit) 10.1.0.3.0 o Oracle 10g R2 (64 bit) 10.2.0.2.0 o Oracle 9i (64 bit) 9.2.0.3 IBM AIX 5.3.0.0

Transcript of ArcSDE 9.1 System Requirements - ArcGIS

Page 1: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 System Requirements

This PDF contains system requirements information, including hardware requirements, best performance

configurations, and limitations, for ArcSDE 9.1.

HP HP-UX 11i (11.11) PA-RISC

o IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 4a

o Informix Dynamic Server 10.00 HC5

o Informix Dynamic Server 9.40 HC3

o Oracle 10g (64 bit) 10.1.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 8i (32 bit) 8.1.7.0.0

o Oracle 9i (64 bit) 9.2.0.3.0

HP HP-UX 11i (11.23) PA-RISC

o Oracle 9i (64 bit) 9.2.0.7.0

HP TRU64.5.1a

o Oracle 8i (64 bit) 8.1.7.0.0

o Oracle 9i (64 bit) 9.2.0.3.0

HP TRU64.5.1b

o Oracle 9i (64 bit) 9.2.0.3.0

IBM AIX 5.1

o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

o IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 6a

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

o Informix Dynamic Server 9.40 UC3

o Oracle 8i (32 bit) 8.1.7.0.0

o Oracle 9i (64 bit) 9.2.0.3

IBM AIX 5.2.0.0

o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 4

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

o Informix Dynamic Server 10.00 UC5

o Oracle 10g (64 bit) 10.1.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 9i (64 bit) 9.2.0.3

IBM AIX 5.3.0.0

Page 2: ArcSDE 9.1 System Requirements - ArcGIS

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 5

o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 6

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

o Informix Dynamic Server 10.00 UC5

o Informix Dynamic Server 9.40 UC5

o Oracle 10g (64 bit) 10.1.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 9i (64 bit) 9.2.0.4

Linux-Intel Red Hat Enterprise Linux AS/ES 3.0

o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

o Oracle 10g (32 bit) 10.1.0.3.0

o Oracle 10g R2 (32 bit) 10.2.0.2

o Oracle 9i (32 bit) 9.2.0.4

Linux-Intel Red Hat Enterprise Linux AS/ES 4.0

o Oracle 10g (32 bit) 10.1.0.3.0

o Oracle 10g R2 (32 bit) 10.2.0.2

o Oracle 9i (32 bit) 9.2.0.4

Linux- Intel SUSE Linux Enterprise Server 9

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o Oracle 10g (32 bit) 10.1.0.3.0

o Oracle 10g R2 (32 bit) 10.2.0.2

o Oracle 9i (32 bit) 9.2.0.4

PC-Intel Windows 2000 Server, Advanced Server & Datacenter

o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 3

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

o Informix Dynamic Server 9.40 TC3

o Microsoft SQL Server 2000 SP4

o Microsoft SQL Server 2005

o Microsoft SQL Server 2005 SP2

o Oracle 10g (32 bit) 10.1.0.3.0

o Oracle 10g R2 (32 bit) 10.2.0.2

o Oracle 8i (32 bit) 8.1.7

Page 3: ArcSDE 9.1 System Requirements - ArcGIS

o Oracle 9i (32 bit) 9.2.0.3.0

PC-Intel Windows 2003 64-bit (AMD64) Standard, Enterprise & Datac

o Oracle 10g R2 (32 bit) 10.2.0.2

PC-Intel Windows 2003 64-bit (EM64T) Standard, Enterprise & Datac

o Microsoft SQL Server (64-bit) 2005

o Oracle 10g R2 (32 bit) 10.2.0.2

PC-Intel Windows 2003 Server SP1 Release 2 Std., Ent & Datactr

o Microsoft SQL Server 2000 SP4

o Microsoft SQL Server 2005 SP2

o Oracle 10g R2 (32 bit) 10.2.0.2

PC-Intel Windows 2003 Server SP2

o Microsoft SQL Server 2000 SP4

o Oracle 10g R2 (32 bit) 10.2.0.2

PC-Intel Windows 2003 Server Standard, Enterprise & Datacenter

o IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 3

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

o IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 6

o Informix Dynamic Server 10.00 TC4

o Informix Dynamic Server 10.00 TC3

o Microsoft SQL Server 2000 SP4

o Microsoft SQL Server 2005 SP1

o Oracle 10g (32 bit) 10.1.0.3.0

o Oracle 10g R2 (32 bit) 10.2.0.2.0

o Oracle 9i (32 bit) 9.2.0.3.0

Sun Solaris 10 (SPARC)

o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 6

o Informix Dynamic Server 10.00 UC5

o Oracle 10g (64 bit) 10.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 9i (64 bit) 9.2.0.5.0

Sun Solaris 8 (SPARC)

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 6

o Informix Dynamic Server 9.40 UC3

o Oracle 10g (64 bit) 10.1.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 8i (32 bit) 8.1.7.0.0

o Oracle 9i (32 bit) 9.2.0.3.0

o Oracle 9i (64 bit) 9.2.0.3.0

Page 4: ArcSDE 9.1 System Requirements - ArcGIS

Sun Solaris 9 (SPARC)

o IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 6

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

o IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

o Informix Dynamic Server 10.00 UC5

o Informix Dynamic Server 9.40 UC3

o Oracle 10g (64 bit) 10.1.0.3.0

o Oracle 10g R2 (64 bit) 10.2.0.2.0

o Oracle 8i (32 bit) 8.1.7.0.0

o Oracle 9i (32 bit) 9.2.0.3.0

o Oracle 9i (64 bit) 9.2.0.3.0

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 4a

Quick Links

Hardware Requirements

Database Notes

Limitations

Related Materials

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 64-bit)

DBMS Version: Fixpak 4a

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

Page 5: ArcSDE 9.1 System Requirements - ArcGIS

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP4a.

Limitations

Database:

-We are still investigating the use of Fixpak 6a and above. Contact Technical Support for more

details.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on INFORMIX Dynamic Server 10.00.HC5

Quick Links

Hardware Requirements

Page 6: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 10.00.HC5

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 10.00.HC5 Enterprise Edition Only.

Requirements:

-Informix Spatial Datablade 8.20.HC2

-Informix Client SDK 2.81.HC2

(We are unable to certify C-SDK 2.90 due to OS changes)

Notes:

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on INFORMIX Dynamic Server 9.40.HC3

Quick Links

Page 7: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.HC3

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 9.40HC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.HC1

Informix ClientSDK 2.81.HC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on Oracle 10g (64 bit) 10.1.0.3.0

Quick Links

Page 8: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Page 9: ArcSDE 9.1 System Requirements - ArcGIS

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on Oracle 10g R2 (64 bit) 10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Page 10: ArcSDE 9.1 System Requirements - ArcGIS

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

Page 11: ArcSDE 9.1 System Requirements - ArcGIS

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on Oracle 8i (32 bit) 8.1.7.0.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (32 bit)

DBMS Version: 8.1.7.0.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with HP HP-UX 11i (11.11) PA-RISC on Oracle 9i (64 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Page 12: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.11) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with HP HP-UX 11i (11.23) PA-RISC on Oracle 9i (64 bit) 9.2.0.7.0

Quick Links

Page 13: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: HP

Operating System: HP-UX 11i (11.23) PA-RISC

Service Pack(s)/Patch(es): Please see the notes section for information.

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.7.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Processor:

HP PA-RISC

Window System:

CDE or HP VUE

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certification performed using ArcSDE 9.1 SP1 using Oracle 9.2.0.7 64bit.

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with HP TRU64 5.1a on Oracle 8i (64 bit) 8.1.7.0.0

Page 14: ArcSDE 9.1 System Requirements - ArcGIS

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: HP TRU64

Operating System: 5.1a

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (64 bit)

DBMS Version: 8.1.7.0.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

Loading mandatory OS subsets:

Compaq Fortran for Tru64 UNIX Alpha Systems Run-Time Support (/usr/shlib/libfor.so) is

required for ArcInfo software. In this example, CDROM is SCSI #4.

1. Mount Tru64 UNIX Associated Products CD: mount -dr /dev/rz4c /cdrom.

2. Load subset from /cdrom/ALPHA using the ‘setld –l’ command.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with HP TRU64 5.1a on Oracle 9i (64 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: HP TRU64

Page 15: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: 5.1a

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

Loading mandatory OS subsets:

Compaq Fortran for Tru64 UNIX Alpha Systems Run-Time Support (/usr/shlib/libfor.so) is

required for ArcInfo software. In this example, CDROM is SCSI #4.

1. Mount Tru64 UNIX Associated Products CD: mount -dr /dev/rz4c /cdrom.

2. Load subset from /cdrom/ALPHA using the ‘setld –l’ command.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with HP TRU64 5.1b on Oracle 9i (64 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Page 16: ArcSDE 9.1 System Requirements - ArcGIS

Platform: HP TRU64

Operating System: 5.1b

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

Loading mandatory OS subsets:

Compaq Fortran for Tru64 UNIX Alpha Systems Run-Time Support (/usr/shlib/libfor.so) is

required for ArcInfo software. In this example, CDROM is SCSI #4.

1. Mount Tru64 UNIX Associated Products CD: mount -dr /dev/rz4c /cdrom.

2. Load subset from /cdrom/ALPHA using the ‘setld –l’ command.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with IBM AIX 5.1 on IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Page 17: ArcSDE 9.1 System Requirements - ArcGIS

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 32-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

Page 18: ArcSDE 9.1 System Requirements - ArcGIS

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.1 on IBM DB2 Universal Database 8.1 (UDB 64-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 64-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

Page 19: ArcSDE 9.1 System Requirements - ArcGIS

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.1 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 20: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.1 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

Page 21: ArcSDE 9.1 System Requirements - ArcGIS

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY79368 (AIX 5.1) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

Page 22: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with IBM AIX 5.1 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY79368 (AIX 5.1) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

Page 23: ArcSDE 9.1 System Requirements - ArcGIS

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.1 on INFORMIX Dynamic Server 9.40.UC3

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.UC3

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 24: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Certified for IDS 9.40UC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.UC1

Informix ClientSDK 2.81.UC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with IBM AIX 5.1 on Oracle 8i (32 bit) 8.1.7.0.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (32 bit)

DBMS Version: 8.1.7.0.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with IBM AIX 5.1 on Oracle 9i (64 bit) 9.2.0.3

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: IBM

Page 25: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: AIX 5.1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database

8.1 (UDB 32-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 32-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

Page 26: ArcSDE 9.1 System Requirements - ArcGIS

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Page 27: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

Page 28: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

Page 29: ArcSDE 9.1 System Requirements - ArcGIS

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 4

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 4

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 30: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-IBM Spatial Extender Version 8.2 FP4 (8.1 FP11 = 8.2 FP4).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 1

Page 31: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY79365 (AIX 5.2) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.2.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

Quick Links

Page 32: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY79365 (AIX 5.2) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

Page 33: ArcSDE 9.1 System Requirements - ArcGIS

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.2.0.0 on INFORMIX Dynamic Server 10.00.UC5

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 10.00.UC5

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 10.00.UC5 Enterprise Edition Only.

Page 34: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-Informix Spatial Datablade 8.20.UC2

-Informix Client SDK 2.90.UC4

Notes:

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with IBM AIX 5.2.0.0 on Oracle 10g (64 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Page 35: ArcSDE 9.1 System Requirements - ArcGIS

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with IBM AIX 5.2.0.0 on Oracle 10g R2 (64 bit) 10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Page 36: ArcSDE 9.1 System Requirements - ArcGIS

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with IBM AIX 5.2.0.0 on Oracle 9i (64 bit) 9.2.0.3

Quick Links

Page 37: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.2.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Page 38: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

Page 39: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

Page 40: ArcSDE 9.1 System Requirements - ArcGIS

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 5

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 5

DBMS Certification Date: November 30, 2006

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 41: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-IBM Spatial Extender Version 8.1 FP12 (8.2 FP5).

-IBM APAR IY78499 (AIX 5.3) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 5

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

Page 42: ArcSDE 9.1 System Requirements - ArcGIS

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 5

DBMS Certification Date: November 30, 2006

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP12 (8.2 FP5).

-IBM APAR IY78499 (AIX 5.3) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) ESE Fixpak 6

Page 43: ArcSDE 9.1 System Requirements - ArcGIS

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 6

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP13 (8.2 FP6).

-IBM APAR IY78499 (AIX 5.3) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

Page 44: ArcSDE 9.1 System Requirements - ArcGIS

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 45: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY78499 (AIX 5.3) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

ArcSDE 9.1 with IBM AIX 5.3.0.0 on IBM DB2 Universal Database 8.2 (UDB 64-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Page 46: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-IBM APAR IY78499 (AIX 5.3) - This is an operating system patch for intermittent memory

problems.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

-Known issues for DB2 Universal Database on AIX 4.3.3, 5.1, 5.2, and 5.3

Page 47: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with IBM AIX 5.3.0.0 on INFORMIX Dynamic Server 10.00.UC5

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 10.00.UC5

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 10.00.UC5 Enterprise Edition Only.

Requirements:

-Informix Spatial Datablade 8.20.UC2

-Informix Client SDK 2.90.UC4

Notes:

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with IBM AIX 5.3.0.0 on INFORMIX Dynamic Server

9.40.UC5

Quick Links

Hardware Requirements

Page 48: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.UC5

DBMS Certification Date: July 20, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 9.40UC5 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.UC2

Informix ClientSDK 2.90.UC3

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with IBM AIX 5.3.0.0 on Oracle 10g (64 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Page 49: ArcSDE 9.1 System Requirements - ArcGIS

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

Page 50: ArcSDE 9.1 System Requirements - ArcGIS

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with IBM AIX 5.3.0.0 on Oracle 10g R2 (64 bit) 10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Page 51: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with IBM AIX 5.3.0.0 on Oracle 9i (64 bit) 9.2.0.4

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: IBM

Operating System: AIX 5.3.0.0

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

Page 52: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Version: 9.2.0.4

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 32-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

Page 53: ArcSDE 9.1 System Requirements - ArcGIS

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

Page 54: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Page 55: ArcSDE 9.1 System Requirements - ArcGIS

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-Requires a minimum of RHEL 3 Update 2

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Page 56: ArcSDE 9.1 System Requirements - ArcGIS

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 57: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

-Requires a minimum of RHEL 3 Update 2

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Page 58: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 4

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP11 (8.2 FP4).

Related Materials

Page 59: ArcSDE 9.1 System Requirements - ArcGIS

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on Oracle 10g (32 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (32 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Page 60: ArcSDE 9.1 System Requirements - ArcGIS

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

Page 61: ArcSDE 9.1 System Requirements - ArcGIS

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on Oracle 10g R2 (32 bit) 10.2.0.2

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Page 62: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Page 63: ArcSDE 9.1 System Requirements - ArcGIS

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 3.0 on Oracle 9i (32 bit) 9.2.0.4

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 3.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.4

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

Page 64: ArcSDE 9.1 System Requirements - ArcGIS

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from RHEL AS/ES will be supported as long as the patches are supported by

the webservers and they are from Red Hat without any modification to the latest kernel/glibc

version.

The following packages for the OS install are required for ArcSDE to function properly:

Base Development package

Base Legacy Software Development package

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 4.0 on Oracle 10g (32 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 4.0

Page 65: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (32 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

Page 66: ArcSDE 9.1 System Requirements - ArcGIS

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 4.0 on Oracle 10g R2 (32 bit) 10.2.0.2

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: Red Hat Enterprise Linux AS/ES 4.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2

Page 67: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with Linux-Intel Red Hat Enterprise Linux AS/ES 4.0 on Oracle 9i (32 bit) 9.2.0.4

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Page 68: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Red Hat Enterprise Linux AS/ES 4.0

Service Pack(s)/Patch(es): Update 2 or higher

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.4

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with Linux-Intel SUSE Linux Enterprise Server 9 on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: SUSE Linux Enterprise Server 9

Page 69: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from SUSE Linux will be supported as long as the patches are supported by the

database and they are from SUSE Linux without any modification to the latest kernel/glibc

version.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

Page 70: ArcSDE 9.1 System Requirements - ArcGIS

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Linux-Intel SUSE Linux Enterprise Server 9 on Oracle 10g (32 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: SUSE Linux Enterprise Server 9

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (32 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

Page 71: ArcSDE 9.1 System Requirements - ArcGIS

support if products are installed on Developer's Release of an Operating System.

The linux patches from SUSE Linux will be supported as long as the patches are supported by the

database and they are from SUSE Linux without any modification to the latest kernel/glibc

version.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Page 72: ArcSDE 9.1 System Requirements - ArcGIS

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Linux-Intel SUSE Linux Enterprise Server 9 on Oracle 10g R2 (32 bit) 10.2.0.2

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: SUSE Linux Enterprise Server 9

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

Page 73: ArcSDE 9.1 System Requirements - ArcGIS

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from SUSE Linux will be supported as long as the patches are supported by the

database and they are from SUSE Linux without any modification to the latest kernel/glibc

version.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with Linux-Intel SUSE Linux Enterprise Server 9 on Oracle 9i (32 bit) 9.2.0.4

Quick Links

Hardware Requirements

Database Notes

Page 74: ArcSDE 9.1 System Requirements - ArcGIS

Product: ArcSDE 9.1

Platform: Linux-Intel

Operating System: SUSE Linux Enterprise Server 9

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.4

DBMS Certification Date: May 18, 2005

Hardware Requirements Architecture:

x86 architecture (32-bit)

Notes:

OPERATING SYSTEM REQUIREMENTS

ArcSDE is only supported on Linux x86, on CPUs that adhere to the x86 architecture (32-bit),

with supported Linux releases.

It is a requirement that the OS (binary) has not been modified. ESRI does not provide any

support if products are installed on Developer's Release of an Operating System.

The linux patches from SUSE Linux will be supported as long as the patches are supported by the

database and they are from SUSE Linux without any modification to the latest kernel/glibc

version.

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

Page 75: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 32-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

Page 76: ArcSDE 9.1 System Requirements - ArcGIS

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 77: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Page 78: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 3

Page 79: ArcSDE 9.1 System Requirements - ArcGIS

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 3

DBMS Certification Date: April 17, 2006

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP3 (8.1 FP10).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

Page 80: ArcSDE 9.1 System Requirements - ArcGIS

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 4

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 81: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-IBM Spatial Extender Version 8.1 FP11 (8.2 FP4).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on INFORMIX Dynamic Server 9.40.TC3

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.TC3

Page 82: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 9.40TC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.TC1

Informix ClientSDK 2.81.TC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Microsoft SQL Server 2000 SP4

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2000 SP4

DBMS Certification Date: May 18, 2005

Hardware Requirements

Page 83: ArcSDE 9.1 System Requirements - ArcGIS

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Versions Supported - Desktop Engine, Standard, Enterprise

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Microsoft SQL Server 2005

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2005

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

The minimum level of support for SQL Server 2005 is ArcSDE 9.1, SP1.

Page 84: ArcSDE 9.1 System Requirements - ArcGIS

Information on how to manually configure a SQL Server 2005 instance for ArcSDE can be

found at KB 30472.

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Microsoft SQL Server 2005 SP2

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2005 SP2

DBMS Certification Date: May 14, 2007

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Oracle 10g (32 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Page 85: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (32 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

Page 86: ArcSDE 9.1 System Requirements - ArcGIS

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4 for

Windows (includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of

XML columns).

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Oracle 10g R2 (32 bit) 10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2.0

Page 87: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&Me

taID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 for Oracle 10gR2 is supported on Windows Server 2003, Service Pack 1 (SP1).

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Oracle 8i (32 bit) 8.1.7

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: PC-Intel

Page 88: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (32 bit)

DBMS Version: 8.1.7

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with PC-Intel Windows 2000 Server, Advanced Server & Datacenter on Oracle 9i (32 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2000 Server, Advanced Server & Datacenter

Service Pack(s)/Patch(es): SP4

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements Notes:

Page 89: ArcSDE 9.1 System Requirements - ArcGIS

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with PC-Intel Windows 2003 64-bit (AMD64) Standard,

Enterprise & Datac on Oracle 10g R2 (64 bit) 10.2.0.2

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 64-bit (AMD64) Standard, Enterprise & Datac

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

software. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

Page 90: ArcSDE 9.1 System Requirements - ArcGIS

Required Configuration: ArcSDE 9.1 for Oracle10gR2 must be setup to access the

Oracle10gR2 64bit database using an Oracle10gR2 32bit client whether using Direct Connect

or the Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter

6). Instructions for setting up ArcSDE 9.1 using the Oracle10gR2 32bit client to connect

correctly to the Oracle10gR2 64bit database are as follows:

- Install the 32bit Oracle 10gR2 (10.2.0.2) client software (see Oracle Metalink for download,

install and setup instructions).

- Create a service name using the 32bit Oracle 10gR2 Net Manager you just installed to use in

connecting to your 64bit Oracle10gR2 database.

- Install and setup ArcSDE 9.1 making sure you are using the correct version of the 32bit

Oracle 10gR2 install. Use the 32bit Oracle 10gR2 service name you defined above for the

connection to the 64bit Oracle10gR2 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using the correct 32bit Oracle 10gR2 patch level

noted above. You then use the 32bit Oracle 10gR2 service name created to connect to the

already setup ArcSDE 64bit Oracle 10gR2 database.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with PC-Intel Windows 2003 64-bit (EM64T) Standard,

Enterprise & Datac on Microsoft SQL Server (64-bit) 2005

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 64-bit (EM64T) Standard, Enterprise & Datac

Page 91: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server (64-bit)

DBMS Version: 2005

DBMS Certification Date: May 18, 2005

Database Notes

Users are required to have installed SQL Server 2005 for x64 Systems and ArcSDE 9.1, SP1.

ArcSDE 9.1 with PC-Intel Windows 2003 64-bit (EM64T) Standard,

Enterprise & Datac on Oracle 10g R2 (64 bit) 10.2.0.2

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 64-bit (EM64T) Standard, Enterprise & Datac

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Page 92: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

software. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&M

etaID=1155.

Required Configuration: ArcSDE 9.1 for Oracle10gR2 must be setup to access the

Oracle10gR2 64bit database using an Oracle10gR2 32bit client whether using Direct Connect

or the Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter

6). Instructions for setting up ArcSDE 9.1 using the Oracle10gR2 32bit client to connect

correctly to the Oracle10gR2 64bit database are as follows:

- Install the 32bit Oracle 10gR2 (10.2.0.2) client software (see Oracle Metalink for download,

install and setup instructions).

- Create a service name using the 32bit Oracle 10gR2 Net Manager you just installed to use in

connecting to your 64bit Oracle10gR2 database.

- Install and setup ArcSDE 9.1 making sure you are using the correct version of the 32bit

Oracle 10gR2 install. Use the 32bit Oracle 10gR2 service name you defined above for the

connection to the 64bit Oracle10gR2 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using the correct 32bit Oracle 10gR2 patch level

noted above. You then use the 32bit Oracle 10gR2 service name created to connect to the

already setup ArcSDE 64bit Oracle 10gR2 database.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

Page 93: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with PC-Intel Windows 2003 Server SP1 Release 2 Std, Ent

& Datactr on Microsoft SQL Server 2000 SP4

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server SP1 Release 2 Std, Ent & Datactr

Service Pack(s)/Patch(es): SP1 Release2

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2000 SP4

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with PC-Intel Windows 2003 Server SP1 Release 2 Std, Ent

& Datactr on Microsoft SQL Server 2005 SP2

Quick Links

Hardware Requirements

Page 94: ArcSDE 9.1 System Requirements - ArcGIS

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server SP1 Release 2 Std, Ent & Datactr

Service Pack(s)/Patch(es): SP1 Release2

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2005 SP2

DBMS Certification Date: September 4, 2006

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with PC-Intel Windows 2003 Server SP1 Release 2 Std, Ent

& Datactr on Oracle 10g R2 (32 bit) 10.2.0.2

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Page 95: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Windows 2003 Server SP1 Release 2 Std, Ent & Datactr

Service Pack(s)/Patch(es): SP1 Release2

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

Page 96: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with PC-Intel Windows 2003 Server SP2 on Microsoft SQL

Server 2000 SP4

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server SP2

Shipping/Release Date: May 18, 2005

Hardware Certification Date: October 17, 2007

DBMS: Microsoft SQL Server

DBMS Version: 2000 SP4

DBMS Certification Date: May 18, 2005

ArcSDE 9.1 with PC-Intel Windows 2003 Server SP2 on Oracle 10g R2

(32 bit) 10.2.0.2

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server SP2

Shipping/Release Date: May 18, 2005

Hardware Certification Date: October 17, 2007

DBMS: Oracle 10g R2 (32 bit)

Page 97: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Version: 10.2.0.2

DBMS Certification Date: May 18, 2005

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&M

etaID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 for Oracle 10gR2 is supported on Windows Server 2003, Service Pack 2 (SP2).

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.1 (UDB 32-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Page 98: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 32-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

Page 99: ArcSDE 9.1 System Requirements - ArcGIS

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 100: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Page 101: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 2

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

Page 102: ArcSDE 9.1 System Requirements - ArcGIS

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 3

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 3

DBMS Certification Date: April 17, 2006

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 103: ArcSDE 9.1 System Requirements - ArcGIS

Requirements:

-IBM Spatial Extender Version 8.1 FP10 (8.1 FP10, 8.2 FP3).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 4

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Page 104: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 4

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP11 (8.2 FP4).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

Page 105: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on IBM DB2 Universal Database 8.2 (UDB 32-bit) Fixpak 6

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 32-bit)

DBMS Version: Fixpak 6

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP13 (8.2 FP6).

Page 106: ArcSDE 9.1 System Requirements - ArcGIS

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on INFORMIX Dynamic Server 10.00.TC4

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

Page 107: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Version: 10.00.TC4

DBMS Certification Date: January 31, 2006

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on INFORMIX Dynamic Server 9.40.TC3

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.TC3

DBMS Certification Date: May 18, 2005

Hardware Requirements

Page 108: ArcSDE 9.1 System Requirements - ArcGIS

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 9.40TC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.TC1

Informix ClientSDK 2.81.TC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

Database Notes

Certified for IDS 10.00.TC4 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.TC2

Informix ClientSDK 2.90.TC4

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on Microsoft SQL Server 2000 SP4

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Page 109: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2000 SP4

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Versions Supported - Desktop Engine, Standard, Enterprise

ArcSDE 9.1 for SQL Server 2000 in addition is supported on Windows Server 2003, Service

Pack 1 (SP1).

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on Microsoft SQL Server 2005 SP1

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Page 110: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Microsoft SQL Server

DBMS Version: 2005 SP1

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

The minimum level of support for SQL Server 2005 is ArcSDE 9.1 SP1.

The minimum level of support for SQL Server 2005 SP1 is ArcSDE 9.1 SP2.

Information on how to manually configure a SQL Server 2005 instance for ArcSDE can be

found at KB 30472.

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on Oracle 10g (32 bit) 10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Page 111: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (32 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

Page 112: ArcSDE 9.1 System Requirements - ArcGIS

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4 for

Windows (includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of

XML columns).

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on Oracle 10g R2 (32 bit) 10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Page 113: ArcSDE 9.1 System Requirements - ArcGIS

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (32 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&M

etaID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 for Oracle 10gR2 is supported on Windows Server 2003, Service Pack 1 (SP1).

Page 114: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with PC-Intel Windows 2003 Server Standard, Enterprise &

Datacenter on Oracle 9i (32 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: PC-Intel

Operating System: Windows 2003 Server Standard, Enterprise & Datacenter

Service Pack(s)/Patch(es): SP1

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Oracle 9.2.0.3 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

Page 115: ArcSDE 9.1 System Requirements - ArcGIS

documentation.

ArcSDE 9.1 for Oracle is supported on Windows Server 2003, Service Pack 1 (SP1).

ArcSDE 9.1 with Sun Solaris 10 (SPARC) on IBM DB2 Universal

Database 8.2 (UDB 64-bit) ESE Fixpak 6

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 10 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 6

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 116: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP13 (8.1 FP13 = 8.2 FP6).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Sun Solaris 10 (SPARC) on INFORMIX Dynamic Server

10.00.UC5

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 10 (SPARC)

Shipping/Release Date: May 18, 2005

Page 117: ArcSDE 9.1 System Requirements - ArcGIS

DBMS: INFORMIX Dynamic Server

DBMS Version: 10.00.UC5

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 10.00.UC5 Enterprise Edition Only.

Requirements:

-Informix Spatial Datablade 8.20.UC2

-Informix Client SDK 2.90.UC3

(We are unable to certify C-SDK 2.90.UC4 due to IBM bug #idsdb00002734)

Notes:

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with Sun Solaris 10 (SPARC) on Oracle 10g (64 bit)

10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Page 118: ArcSDE 9.1 System Requirements - ArcGIS

Operating System: Solaris 10 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

Page 119: ArcSDE 9.1 System Requirements - ArcGIS

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Sun Solaris 10 (SPARC) on Oracle 10g R2 (64 bit)

10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 10 (SPARC)

Page 120: ArcSDE 9.1 System Requirements - ArcGIS

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&M

etaID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

Page 121: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with Sun Solaris 10 (SPARC) on Oracle 9i (64 bit) 9.2.0.5.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 10 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.5.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Please see KB article #25896 for additional required Oracle Spatial patch information.

Oracle Patch Support

Page 122: ArcSDE 9.1 System Requirements - ArcGIS

Oracle 9.2.0.5 or higher 9.2 patch set level as per Oracle Corporation's Patch Set Overview

documentation.

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on IBM DB2 Universal Database

8.1 (UDB 64-bit) Fixpak 6a

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.1 (UDB 64-bit)

DBMS Version: Fixpak 6a

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP6a.

Page 123: ArcSDE 9.1 System Requirements - ArcGIS

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on INFORMIX Dynamic Server

9.40.UC3

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.UC3

Page 124: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: January 17, 2006

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 9.40UC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.UC1

Informix ClientSDK 2.81.UC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on Oracle 10g (64 bit)

10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

Page 125: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Page 126: ArcSDE 9.1 System Requirements - ArcGIS

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on Oracle 8i (32 bit) 8.1.7.0.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (32 bit)

DBMS Version: 8.1.7.0.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

Page 127: ArcSDE 9.1 System Requirements - ArcGIS

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on Oracle 9i (32 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with Sun Solaris 8 (SPARC) on Oracle 9i (64 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Page 128: ArcSDE 9.1 System Requirements - ArcGIS

Platform: Sun

Operating System: Solaris 8 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on IBM DB2 Universal Database

8.2 (UDB 64-bit) ESE Fixpak 6

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

Page 129: ArcSDE 9.1 System Requirements - ArcGIS

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: ESE Fixpak 6

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.1 FP13 (8.1 FP13 = 8.2 FP6).

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

Page 130: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on IBM DB2 Universal Database

8.2 (UDB 64-bit) Fixpak 1

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 1

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

-Requires IBM Spatial Extender Version 8.2 FP1 (8.1 FP8). FixPak 8a has a few additional

fixes. This is supported and assumed to work but untested at the present time.

Page 131: ArcSDE 9.1 System Requirements - ArcGIS

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on IBM DB2 Universal Database

8.2 (UDB 64-bit) Fixpak 2

Quick Links

Hardware Requirements

Database Notes

Related Materials

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: IBM DB2 Universal Database 8.2 (UDB 64-bit)

DBMS Version: Fixpak 2

Page 132: ArcSDE 9.1 System Requirements - ArcGIS

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Requirements:

-IBM Spatial Extender Version 8.2 FP2 (8.1 FP9). FixPak 9a has a few additional fixes. This is

supported and assumed to work but untested at the present time.

Related Materials

Database:

More ESRI Related Information:

- ESRI Supported Environment Policy

- FAQ: What is the support and planned support for ArcSDE for IBM DB2 with DB2 UDB 8.1 FP6a

FP7a, FP8 and DB2 UDB 8.2?

More DB2 Related Information:

-ArcSDE is tested and certified on DB2 UDB Enterprise Server Edition. Other versions of DB2

UDB such as WSE, WSUE, and PE share a common code base and are supported as long as they

meet the ArcSDE requirements listed above. For more information on the distributed editions of

DB2, refer to the articles listed below.

-Which Distributed Edition of DB2 Version 8 is Right for You?

-Comparing the distributed DB2 UDB servers

-DB2 System Requirements

Page 133: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on INFORMIX Dynamic Server

10.00.UC5

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 10.00.UC5

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Certified for IDS 10.00.UC5 Enterprise Edition Only.

Requirements:

-Informix Spatial Datablade 8.20.UC2

-Informix Client SDK 2.90.UC3

(We are unable to certify C-SDK 2.90.UC4 due to IBM bug #idsdb00002734)

Page 134: ArcSDE 9.1 System Requirements - ArcGIS

Notes:

-ArcSDE 9.2 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.2.

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on INFORMIX Dynamic Server

9.40.UC3

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: INFORMIX Dynamic Server

DBMS Version: 9.40.UC3

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 135: ArcSDE 9.1 System Requirements - ArcGIS

Certified for IDS 9.40UC3 Enterprise Edition Only.

Requires:

Informix Spatial Datablade 8.20.UC1

Informix ClientSDK 2.81.UC2

-ArcSDE 9.1 for Informix does not support Extensible Markup Language (XML). As a

consequence, it will not support ArcIMS Metadata Server 9.1.

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on Oracle 10g (64 bit)

10.1.0.3.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g (64 bit)

DBMS Version: 10.1.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 136: ArcSDE 9.1 System Requirements - ArcGIS

Database Notes

If your database is Oracle 10gR1 (10.1.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.listPatches&PID=19.

See below for setup details specific to Oracle 10gR1 databases.

Required Configuration: The recommended configuration for ArcSDE 9.1 and Oracle 10gR1

databases is to install and setup the ArcSDE 9.1 for Oracle 10gR2 release and access the

Oracle10gR1 database using an Oracle10gR2 client whether using Direct Connect or the

Application Server (See Oracle Database Upgrade Guide, 10g Release 2 (10.2) Chapter 6).

Instructions for setting up ArcSDE 9.1 for Oracle 10gR2 using the Oracle10gR2 client to

connect correctly to the Oracle10gR1 database are as follows:

- Install the Oracle 10gR2 (10.2.0.2) client software. This will involve first installing the

10.2.0.1 Oracle client and then applying the Oracle 10.2.0.2 client patch. (see Oracle Metalink

for download, install and setup instructions).

- Create a service name using the Oracle 10gR2 Net Manager you just installed to use in

connecting to your Oracle10gR1 database.

- Install and setup ArcSDE 9.1 for Oracle10gR2. Make sure ArcSDE is using the Oracle 10gR2

client software (See Oracle Install documentation for details). Use the Oracle 10gR2 service

name you defined above for the connection to the Oracle10gR1 database.

For Direct Connect the Oracle install and setup instructions for your client machines is the

same as above, making sure that you are using Oracle 10gR2 version 10.2.0.2. You then use

the Oracle 10gR2 service name created to connect to ArcSDE already setup in the Oracle

10gR1 database.

Oracle 10g R1 Patch Support

Database: Oracle 10.1.0.3.0 or higher Oracle10g Release1 Patch. This includes Oracle 10g

Release 1 patch set levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's

Patch Set Overview and Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

Page 137: ArcSDE 9.1 System Requirements - ArcGIS

ESRI's Oracle 10g Release 1 testing has been done using Oracle 10.1.0.3.0 with Patch 4

(includes fix for Oracle Text bug 3612581 required for the Metadata Server or use of XML

columns).

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on Oracle 10g R2 (64 bit)

10.2.0.2.0

Quick Links

Hardware Requirements

Database Notes

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 10g R2 (64 bit)

DBMS Version: 10.2.0.2.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Database Notes

Page 138: ArcSDE 9.1 System Requirements - ArcGIS

If your database is Oracle 10gR2 (10.2.0.x) you must use the ArcSDE 9.1 for Oracle 10gR2

release. To obtain this release contact Customer Service and request the ArcSDE 9.1 for

Oracle10gR2 release or download this release from

http://support.esri.com/index.cfm?fa=downloads.patchesServicePacks.viewPatch&PID=19&M

etaID=1155.

Oracle 10g Release 2 Database Patch Support

Oracle 10.2.0.2.0 or higher Oracle10gR2 Patch. This includes Oracle 10g Release 2 patch set

levels and Oracle Interim (One-Off) Patch as per Oracle Corporation's Patch Set Overview and

Interim Patch documentation.

See Oracle Metalink for all Oracle patch set (and Interim Patch) documentation and install

instructions. ESRI recommends making a full back up of your Oracle database prior to

applying any Oracle patch sets or interim patch. If functionality that was working prior to

applying the Oracle patch set or interim patch stops working, return to the previous version of

Oracle. Contact Oracle support as needed.

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on Oracle 8i (32 bit) 8.1.7.0.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 8i (32 bit)

DBMS Version: 8.1.7.0.0

DBMS Certification Date: May 18, 2005

Page 139: ArcSDE 9.1 System Requirements - ArcGIS

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on Oracle 9i (32 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (32 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.

Page 140: ArcSDE 9.1 System Requirements - ArcGIS

ArcSDE 9.1 with Sun Solaris 9 (SPARC) on Oracle 9i (64 bit) 9.2.0.3.0

Quick Links

Hardware Requirements

Product: ArcSDE 9.1

Platform: Sun

Operating System: Solaris 9 (SPARC)

Shipping/Release Date: May 18, 2005

DBMS: Oracle 9i (64 bit)

DBMS Version: 9.2.0.3.0

DBMS Certification Date: May 18, 2005

Hardware Requirements

CPU Speed:

1.0 GHz recommended or higher

Notes:

System Design Strategies

Recommended platform sizing and system configuration strategies are provided in the System

Design Strategies technical reference document availabe at: System Design Strategies.