Architectural Door Accessories - IDN Inc

72
Rockwood Products Price Book - Architectural Series USA & Canada Prices Effective May 1, 2021 Architectural Door Accessories

Transcript of Architectural Door Accessories - IDN Inc

Page 1: Architectural Door Accessories - IDN Inc

Rockwood ProductsPrice Book - Architectural Series

USA & Canada Prices Effective May 1, 2021

Architectural Door Accessories

Page 2: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.2

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

TA

BLE

OF

CO

NT

EN

TS

*Santoprene™ is a registered trademark of the Exxon Mobil Corporation.

Table of Contents

General Information 2-5

Numeric Index 3

Ordering Information 4

Post Mounted Pulls/General Information 5

Architectural Pulls 6-55

AccenTek™ (solid pulls with accents) 41

AccenTek™ (solid groove pulls) 41

ArborMet (wood grip pulls) 33-35

ArborTek (wood grip pulls) 36-39

BandWidth (collar mount pulls) 14-15

CenTrex (shaped pulls) 40

Classic (finial pulls) 43

Edge Pulls (for closet doors) 8

Flush Pulls 7

GeoMetek (hex, diamond & narrow profile pulls) 55-57

Groove (straight & offset pulls) 19

LineaMax (grooved pulls) 25-28

Locking Door Pull System 58-61

MariTek (tapered pulls) 43

MegaCurve (long curved pulls) 12

MegaTek (straight & offset pulls) 20-22

MezzoTek (necked post pulls) 13

NeoCylinder (w/ or w/o GripZone) 54

NeoMax (pulls w/GripZone) 23-25

NeoMetrix (w/GripZone) 19

NeoMitre (w/ or w/o GripZone) 54

NoirMet (black anodized grip) 29-30

NoirTek (black anodized grip) 31-32

OvalTek (true oval grip) 16

OvalTek (flat oval grip) 17

Panic Device 62

PlanTek (flat front pulls) 42

RightAngles (w/ or w/o GripZone) 7

SkewTek (angled end pulls) 39

Strikes 63

SoftMet (*Santoprene™ grip) 18

SoftTek (Santoprene™ grip) 18

Traditional (decorative pulls & plates) 43

Tubular (1 ¼" and 1 ½" diameter pulls) 6

Leather Architectural Pulls 44-52

English Bridle Leather (straight & offset pulls) 44-45

Flush Leather Pulls 49-51

Leather Oval (ergonomic pulls) 48

Upholstery Leather GeoMetek 52

Upholstery Leather (straight & offset pulls) 46-47

Small Architectural Pulls 7-53

ArborMet 12

GripZone 11

Groove 11

Leather 53

MegaTek 10

NoirMet 12

Wire 7

Architectural Accessories 8-9

Coat Hooks 8

Door Stops 9

Push Plates, Pull Plates and Signage 9

Architectural Finishes 64

Mounting Types 65

Mounting Details 66-67

Fasteners - Spare Parts 68-70

Mounting Kits 71

Page 3: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 3

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

Numeric Index

NU

ME

RIC

IN

DE

X

570 Dust Proof Strike.................................. 61

DGBKIT Bushing Kit for Glass Doors ............. 61

DP3301 MegaTek Dummy Pull (round) ....... 61

DP3401 NeoTek Dummy Pull ........................... 61

DP7901 GeoMetek Dummy Pull (square) .... 61

ESK-SGL Panic Strike Kits .................................... 63

ESK-MS-SGL Panic Strike Kits .................................... 63

EES-310-1-3/4 Electric Strike Kits ................................ 63

FL3301 Flat Latch Locking Pull ....................... 62

LP3301 Locking Pull PostMount .................... 58

LP3305 Locking Pull PostMount .................... 58

LP3401 Locking Pull NeoTek ........................... 59

LP6061 Locking Pull English Bridle .........59-60

Leather Wrapped

LP6161 Locking Pull Upholstery .................... 60

Leather Wrapped

LP6440 Locking Pull Upholstery .................... 61

Leather Wrapped

LP7901 Locking Pull GeoMetek ..................... 61

LPS01 - LPS12 Locking Pull Strikes ............................. 61

PDU8500 - Panic Device .......................................... 62

PDU8500-6

RM201 - RM372 Tubular .......................................................6

RM405 - RM423 RightAngles ..............................................7

RM710 - RM735 Small Pulls (Wire) ...................................7

RM751 - RM760 Edge Pulls - for Closet Doors ..............8

RM780 - RM790 Flush Pulls ..................................................7

RM801 - RM843 Coat Hooks ...............................................8

RM850 - RM877 Door Stops ................................................9

RM1010 - RM1160 Push Plates, Pull Plates, ........................9

and Signage

RM1200 - RM1270 Small Pulls (MegaTek, Groove) .. 10-11

RM1300 - RM1370 Small Pulls (GripZone) ...................... 11

RM1410 - RM1470 Small Pulls (NoirMet) ........................ 12

RM1510 - RM1570 Small Pulls (ArborMet) ...................... 12

RM2000 - RM2034 MegaCurve ............................................ 12

RM2110 - RM2150 MezzoTek ................................................ 13

RM2200 - RM2244 BandWidth ......................................14-15

RM2300 - RM2330 OvalTek (true oval) ............................. 16

RM2400 - RM2420 OvalTek (flat oval) ............................... 17

RM2510 - RM2544 SoftMet ................................................... 18

RM2610 - RM2640 SoftTek .................................................... 18

RM3010 - RM3060 NeoMetrix .............................................. 19

RM3100 - RM3154 See RM3300-RM3342

RM3101 - RM3131 Groove ..................................................... 19

RM3300 - RM3342 MegaTek ............................................20-22

RM3400 - RM3442 NeoMax .............................................23-25

RM3512 - RM3782 LineaMax ..........................................25-28

RM3800 - RM3854 NoirMet .............................................29-30

RM3900 - RM3954 NoirTek ..............................................31-32

RM4000 - RM4054 ArborMet ..........................................33-35

RM4100 - RM4190 ArborTek ...........................................36-39

RM4200 - RM4274 SkewTek .................................................. 39

RM4400 - RM4516RH CenTrex ................................................... 40

RM4700 - RM4820 AccenTek™ ............................................. 41

RM5200 - RM5280 PlanTek .................................................... 42

RM5500 - RM5598 Traditional .............................................. 43

RM5650 - RM5670 Classic ...................................................... 43

RM5700 - RM5702 MariTek .................................................... 43

RM6060 - RM6092 English Bridle Leather ..................44-45

RM6160 - RM6192 Upholstery Leather .......................46-47

RM6200 - RM6240 Leather Oval .......................................... 48

RM6300 - RM6354 Flush Leather Pulls ........................49-51

RM6400 - RM6440 Upholstery Leather GeoMetek ....... 52

RM6500 - RM6730 Small Pulls (Leather) .......................... 53

RM7210 - RM7240 NeoCylinder .......................................... 54

RM7300 - RM7450 NeoMitre ................................................ 54

RM7700 GeoMetek (Hexagonal) .................... 55

RM7800 - RM7865 GeoMetek (Diamond) ....................... 55

RM7900 - RM7960 GeoMetek (Narrow Profile) .......56-57

SP1001 - SP1082 Fasteners - Spare Parts ................68-70

KIT1 - KITRM380G Mounting Kits ....................................... 71

No. Description Page No. Description Page

Page 4: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.4

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

OR

DE

RIN

G I

NFO

RM

AT

ION

Ordering InformationThis price list cancels and supersedes all prior listings.

Orders are accepted with the understanding that they will be billed at prices in effect at time of shipment.

Prices are subject to change without notice.

We reserve the right to decline the whole or part of orders in which the price or quantity of goods is not acceptable to us.

NOTE: If matching pulls to a previous job, please provide original PO or Order #.

Easy Order PlacementUSA:

By Phone: 1-800-458-2424 Monday through Thursday 8:00 am ET to 7:30 pm ET, Friday 8:00 am ET to 4:30 pm ET

By Fax: Orders may be faxed to 1-800-922-9212

By Email: [email protected]

By Internet: http://extranet.assaabloydss.com/ and select Order Entry under the Customer Service Menu

Canada:

By Phone: 1-800-461-3007 Monday through Friday 8:00 am ET to 4:30 pm ET

By Fax: Orders may be faxed to 1-800-461-8989

By Email: [email protected]

By Internet: http://extranet.assaabloydss.ca/ and select Order Entry under the Customer Service Menu

Terms and Conditions of SaleTerms: 1% 15 days, net 30 days

Remit Payment To: PNC Bank/Rockwood, PO Box 644489, Pittsburgh, PA 15264-4489

For Terms & Conditions and Warranty information pertaining to product sales in Canada, please visit www.assaabloy.ca/terms

Freight PolicyFreight Allowance: All prices are F.O.B. Rockwood, Pennsylvania and/or Ventura, California. Full freight will be allowed on shipments of $1,250 net and

over within the continental limits of the United States. All shipments are routed most cost effective route of our choice. We reserve the right to desig-

nate the carrier.

Special Order MaterialSpecial items made to your specifications are not returnable. These items are not subject to cancellation without consideration of expense involved at

the cancellation date.

SamplesSalable samples will be charged at regular prices.

Returned GoodsReturn no merchandise without written permission from the factory. Authorization will insure your receiving proper credit. Errors in shipping may

occasionally occur. If this is the case immediately notify the factory, and we will gladly make the proper adjustments. If the error is at the customer’s

end, a minimum charge of 25% plus freight will be incurred for handling. Unauthorized claims for labor or charges will not be allowed. No credit will be

allowed beyond six months after invoice date.

ShortagesClaims for shortages must be made within 30 days of invoice date.

TemplatesUpon request we will furnish templates for any of our standard items of manufacture. Commonly used templates are available on our website at

www.assaabloydooraccessories.us.

Product Weight InformationNOTE: Weights indicated throughout the price list are approximate for brass, bronze or stainless steel base material. Aluminum base materials weigh

approximately 1/3 the listed weights.

EngravingEngraving may be added on many pulls and plates. Call factory for pricing.

Safer2Open™ SolutionsSafer2Open™ Solutions available on select Architectural Pulls with a straight post. Configure extended posts and/or closer posts, to easily allow for your

arm to be placed above, below, or through the pull, limiting touch points.

For Terms and Conditions as well as Warranty information pertaining to product sales in Canada, please visit www.assaabloy.ca/terms

Page 5: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 5

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

PO

ST

MO

UN

TE

D P

ULL

S /

GE

NE

RA

L IN

FOR

MA

TIO

N

Post Mounted PullsIt is our goal that you get the best possible functional and aesthetic door pull from our wide selection. On long door pulls

there will naturally be a small amount of flexing between mounting points that are far apart. We offer the following guidelines

to help you determine when a mid-post is required or when you should consider altering the location of the mounting posts

(by moving them closer together) in order to minimize the flexing of the grip. Making the grip rigid by adding a mid-post is the

ideal condition for long pulls on all doors but is particularly important on all glass doors that have an inherent flexing in the

door itself. The combined flexing of the door and the pull can loosen mechanical joints and stress the fasteners.

Our recommendations for adding a mid-post to long door pulls is based on a theoretical pull load of 30 lbs. (foot pounds)

maximum to open the door, which is a greater than the typical force required to open an average door. The maximum amount

of deflection of the grip you will see at that force is 3/8". The conditions on your job site can vary due to door weight, wind

loading, closer settings, locked doors being aggressively pulled and other circumstances. It is our recommendation that you

add a mid-post if there is any question about heavy or hard to open doors; having an extra mounting point always makes for a

more stable and durable installation.

Center toCenter (CTC)

Diameter(Dia.)

On long pulls, post can be positioned closer to each other

and farther away from ends as a strategy to avoid mid-post

if door condition permits.

POST MOUNTED PULLS SHAPES AND SIZES

SHAPE MATERIAL MATERIAL Size MAXIMUM CTC

Round

Stainless Steel

1" 70"

1 1/4" 90"

1 1/2" 110"

Brass/Bronze

1" 57"

1 1/4" 73"

1 1/2" 87"

Aluminum

1" 66"*

1 1/4" 90"*

1 1/2" 115"*

Oval

Stainless Steel

1" x 1 1/2" 100"

1" x 1 7/8" 119"

Flat Oval

Stainless Steel 3/4" x 1 1/2" 93"

Square

Stainless Steel

3/4" x 3/4" 62"

1" x 1" 85"

Rectangular

Stainless Steel1/2" x 1 1/4" 86"3/4" x 1 1/2" 110"

Brass/Bronze 3/4" x 1 1/2" 89"

Rectangular

Stainless Steel1/2" x 1 1/4" 52"3/4" x 1 1/2" 75"

Brass/Bronze 3/4" x 1 1/2" 60"

Mid-Post

Overall(OA)

Clearance

Projection* The maximum length of anodized aluminum pulls is 87” due to our tank size.

Longer aluminum pulls are available in satin finish and clear coated or powder

coat paint.

*The maximum length to powder coat a pull is 118".

Page 6: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.6

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

20

1 -

RM

37

2T

UB

UL

AR

Tubular - 1 1⁄4" & 1 1⁄2" Diameter Pulls

Straight Pulls

Part CTC Dia. 28/628313/710315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM301 12" 1 1⁄4" 152 168 385 416 218 144 163 212 237

RM302 18" 1 1⁄4" 170 188 409 441 242 167 187 244 272

RM303 24" 1 1⁄4" 188 207 431 465 265 188 211 276 308

RM304 36" 1 1⁄4" 225 248 477 517 349 232 260 338 377

RM321 12" 1 1⁄2" 170 187 467 504 257 181 203 264 295

RM322 18" 1 1⁄2" 188 207 491 530 280 203 227 296 330

RM323 24" 1 1⁄2" 206 227 514 555 302 224 250 326 366

RM324 36" 1 1⁄2" 242 268 560 604 387 267 299 390 437

90˚ Offset Pulls

RM201 12" 1 1⁄4" 173 198 293 309 252 177 216 246 287

RM202 18" 1 1⁄4" 189 216 327 342 274 197 237 271 312

RM203 24" 1 1⁄4" 204 233 359 375 295 216 255 303 345

RM204 36" 1 1⁄4" 239 266 431 448 359 242 284 335 377

RM221 12" 1 1⁄2" 224 245 350 375 280 203 255 295 329

RM222 18" 1 1⁄2" 239 257 390 409 347 230 284 335 374

RM223 24" 1 1⁄2" 257 273 440 456 373 253 312 372 414

RM224 36" 1 1⁄2" 291 307 519 537 407 287 344 419 466

Push Bars - Add $6/in. per bar for extra length bars over 36".

RM350 Up to 36" 1 1⁄4" 224 250 327 350 280 203 227 296 303

RM370 Up to 36" 1 1⁄2" 257 283 390 422 366 247 277 361 404

Straight Push Pull Sets - Specify Push Bar CTC. Add $6/in. per bar for extra length bars over 36".

RM351 12" 1 1⁄4" 354 397 573 618 496 368 413 537 552

RM352 18" 1 1⁄4" 363 405 606 654 509 381 426 557 567

RM371 12" 1 1⁄2" 439 481 687 743 565 433 484 631 706

RM372 18" 1 1⁄2" 464 506 710 766 620 458 514 671 748

Offset Push Pull Sets - Specify Push Bar CTC. Add $6/in. per bar for extra length bars over 36".

RM251 12" 1 1⁄4" 416 464 638 687 526 397 444 578 610

RM252 18" 1 1⁄4" 430 481 670 723 544 413 462 603 631

RM271 12" 1 1⁄2" 497 540 759 821 627 466 521 679 758

RM272 18" 1 1⁄2" 519 558 800 864 654 492 550 717 799

Heavy Duty 30˚ Offset Pulls

Part CTC Dia. 28/628313/710315/711

3/605 4/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM257 10" 1 1⁄4" 182 198 394 426 374 255 286 372 409

RM258 12" 1 1⁄4" 198 216 422 457 398 278 313 406 435

RM259 18" 1 1⁄4" 204 224 466 503 429 307 343 448 470

NOTE: Engraving "Push" or "Pull" add $103.00 (1/2" letter height).

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM201

RM352

RM301

30°

RM257

RM350

RM251

Page 7: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 7

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

40

5 -

RM

79

0R

IGH

T A

NG

LES

/ S

MA

LL P

ULL

S /

FLU

SH

PU

LLS

RightAngles - with or without GripZone

Without GripZone (RM410-RM413 specify handing and height x width when ordering.)

Part 28/628313/710315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM405-15 274 311 453 490 390 229 258 331 375

RM410 (leg up) 566 651 969 1,046 723 472 542 685 789

RM411 (leg down) 566 651 969 1,046 723 472 542 685 789

RM412 (leg up) 963 1,100 1,094 1,183 1,127 799 915 1,164 1,331

RM413 (leg down) 963 1,100 1,094 1,183 1,127 799 915 1,164 1,331

With GripZone (RM420-RM423 specify handing and height x width when ordering.)

Part 3/605 9/611 32/629 32316

RM415-15 622 719 447 836

RM420 (leg up) 1,224 1,403 873 1,630

RM421 (leg down) 1,224 1,403 873 1,630

RM422 (leg up) 1,582 1,819 1,115 2,116

RM423 (leg down) 1,582 1,819 1,115 2,116

Small Pulls - for Cabinets, Casework and Closets

Flush Pulls

Flush Pulls

Part Size3/6054/606 10B/613

Stock PC 10BE

26/625 26D/626

RM780 2 3⁄16" x 3 1⁄4" 41 45 45 45

RM782 2 11⁄16" x 4 3⁄16" 45 48 48 48

RM785 3 1⁄2" Dia. 56 50 60 59

Flush Cup Pull

Part OAStock PC

10BE 32D/630 32/629

RM790 14" 179 121 134

26" 211 142 160

38" 228 169 190

RM410

RM415

RM422

RM710

RM715

RM785RM790

RM782

NOTE: If ordering pull to mate with this product, the CTC of the pull needs to be 2" less than the overall of the flush pull.

Order form available when ordering.

Wire Pulls - without base plates

Part CTC Dia.3/6054/606 10B/613

Stock PC 10BE

26/62526D/626 32D/630 32/629

RM710-4 4" 3/8" 39 42 41 39 24 26

RM710-5 5" 3/8" 40 43 42 40 25 27

RM710-6 6" 3/8" 42 46 44 43 26 30

RM720-4 4" 1/2" 48 52 47 48 26 30

RM720-5 5" 1/2" 49 53 49 49 27 32

RM720-6 6" 1/2" 51 54 51 51 30 34

RM730-5 5" 5/8" 55 59 54 55 32 35

RM730-6 6" 5/8" 57 60 55 57 33 36

RM730-7 7" 5/8" 58 64 56 58 34 37

Wire Pulls - with base plates

RM715-4 4" 3/8" 60 65 64 60 44 48

RM715-5 5" 3/8" 64 69 67 64 46 50

RM715-6 6" 3/8" 65 70 68 68 47 55

RM725-4 4" 1/2" 73 77 71 73 48 56

RM725-5 5" 1/2" 74 78 72 74 49 57

RM725-6 6" 1/2" 75 82 74 75 50 58

RM735-5 5" 5/8" 78 86 74 78 50 58

RM735-6 6" 5/8" 82 88 77 82 54 60

RM735-7 7" 5/8" 83 90 78 83 55 61

Page 8: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.8

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

75

1 -

RM

84

3E

DG

E P

ULL

S /

CO

AT

HO

OK

S

Edge Pulls - for Closet Doors

• Specifying Information: 1. Select style pull number; 2. Select standard length [2", 2 1⁄2", 3", 4", 5", 6", 12" (max)];

3. Specify door thickness [Example: RM752-4" 32D 1 3⁄4" door]* RM760 cannot be modified.

Order form available when ordering.

Coat Hooks

Part Size3/6054/606 10B/613

Stock PC 10BE

26/62526D/626 32D/630

RM801 1 1⁄4" x 1 3⁄4" 72 76 75 75 54

RM802 1 1⁄4" x 2 3⁄4" 73 77 76 76 57

RM803 1" x 2" 72 76 75 69

RM804 1" x 3" 73 77 76 70

RM805 1" x 1 3⁄4" 89 98 95 98

RM806 1" x 3" 98 107 103 107

RM807 1 1⁄4" x 2 3⁄4" 109 118 114 118

RM808 1 1⁄4" x 3 1⁄2" 118 127 124 125

RM811 3⁄4" x 1 1⁄2" 49 52 50 49

RM812 1 1⁄4" x 2 1⁄4" 51 55 54 51

Part Size Stock PC/10BE 15/619

RM817 Square 1 3⁄4", 2 11⁄16" Projection 56 55

Part Size

3/6054/606

10B/613Stock PC

10BE 32D/630 32/629

RM820 1⁄2" x 1 5⁄8" 57 41

RM821 5⁄8" x 2 1⁄8" 58 42

RM822 1⁄2" x 1 1⁄2" 41 28

RM823 5⁄8" x 2" 43 29

RM828 3⁄4"W x 2 7⁄8" 85 68 54 74

RM829 3⁄4"W x 1 7⁄8" 76 66 68 70

LineaMet Coat HooksRM830 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68

RM831 5⁄8" x 2 1⁄8" 88 63 68

ArborMet Coat HooksRM835 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68

RM836 5⁄8" x 2 1⁄8" 88 63 68

SoftMet Coat HooksRM838 (w/base plate) 1 1⁄4" x 2 1⁄4" 88 63 68

RM839 5⁄8" x 2 1⁄8" 88 63 68

Groove Coat HooksRM840 (w/base plate) 1⁄2" x 1 5⁄8" 72 49

RM841 (w/base plate) 5⁄8" x 2 1⁄8" 76 53

RM842 1⁄2" x 1 1⁄2" 63 41

RM843 5⁄8" x 2" 66 43

Square Edge Door

Part Max OA

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM751 Up to 12" 104 111 101 79 88

RM752 Up to 12" 107 114 104 82 91

Bevel Edge DoorRM753 Up to 12" 109 118 107 84 95

RM754 Up to 12" 111 120 110 88 99

Double Edge Pull - Square EdgeRM755 Up to 12" 204 220 183 158 177

Concealed Edge Pull

Part Size3/6054/606

10/61210B/613

Stock PC 10BE

26/62526D/626

RM760 1" x 4 1⁄4" 55 59 58 59

RM752

RM801

RM817

RM820

RM830

RM839

RM842

RM760

Page 9: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 9

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

85

0-R

M1

16

0D

OO

R S

TO

PS

/ P

LA

TE

S &

SIG

NA

GE

Push Plates, Pull Plates and Signage

Black bumpers available. Suffix BB after part number.Ex:) RM850BB.32D Add on charge will apply.

Door Stops

Floor Mounted

Part Height3/6054/606

10/61210B/613

Stock PC 10BE

26/62526D/626 32D/630

RM850 1 1⁄2" 27 28 41 20 32

RM851 2 1⁄2" 60 67 64 60 52

RM855 1 3⁄4" 53 57 55 49 45

RM856 2 3⁄4" 65 70 68 65 55

Part Size Stock PC 10BE 15/619

RM857 Square 1" Base, 2 3⁄4" Projection 68 68

Wall Mounted

Part Projection3/6054/606

10/61210B/613

Stock PC 10BE

26/62526D/626 32D/630

RM860 1 3⁄32" 31 33 33 30 24

RM861 1 3⁄32" 31 33 33 30 24

Part Size Stock PC 10BE 15/619

RM867 Square 1 3⁄4" Base, 3⁄4" Projection 54 53

Base Board Mounted

Part Projection3/6054/606

10/61210B/613

Stock PC 10BE

26/62526D/626 32D/630

RM870 1 1⁄2" 42 46 44 39 27

RM871 3 1⁄4" 42 46 44 39 27

RM872 3 3⁄4" 42 46 44 39 27

RM875 1 1⁄2" 59 64 61 59 42

RM876 3 1⁄4" 59 64 61 59 42

RM877 3 3⁄4" 59 64 61 59 42

Square Corner - Adhesive Mount

Part Size3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM1010 4" x 22" 60 66

RM1010H 4" x 22" 89 100

RM1010L 4" x 22" 89 100

Square Corner - Screw MountRM1020 4" x 22" 95 105 72 43 49

RM1020H 4" x 22" 126 146 107 75 84

RM1020L 4" x 22" 134 146 107 75 84

Radius End Corner - Adhesive MountRM1030 4" x 22" 75 84

RM1030H 4" x 22" 105 117

RM1030L 4" x 22" 105 117

Radius End Corner - Screw MountRM1040 4" x 22" 116 127 89 60 66

RM1040H 4" x 22" 153 166 122 89 100

RM1040L 4" x 22" 153 166 122 89 100

Indicator Plates - Adhesive Mount

Part Size3/605 4/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM1110H 1" Dia. 78 90 87 63 70

RM1110L 1" Dia. 78 90 87 63 70

RM1120H 2 1⁄2" Dia. 78 90 87 63 70

RM1120L 2 1⁄2" Dia. 78 90 87 63 70

RM1150M 2" x 4" 85 98 92 70 79

RM1150W 2" x 5 3⁄4" 88 101 95 73 81

Indicator Plates - Screw MountRM1160M 2" x 4" 85 98 92 70 79

RM1160W 2" x 5 3⁄4" 88 101 95 73 81

RM850

RM857

RM867

RM876

RM1010

RM1030

RM1120H

RM1120L

Page 10: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.10

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

12

00

-RM

12

70

SM

ALL

PU

LLS

(M

EG

AT

EK

)

MegaTek - Small Pulls for Cabinets, Casework & Closet Doors

Straight - Flat Ends

Part Max OA Dia.3/6054/606 10/612 10B/613

Stock PC10BE 32D/630 32/629

RM1200-4 5 7⁄8" 1⁄2" 64 69 54 26 30

RM1200-5 6 7⁄8" 1⁄2" 65 72 55 27 31

RM1200-6 7 7⁄8" 1⁄2" 67 73 68 38 45

RM1200-8 9 7⁄8" 1⁄2" 70 75 72 44 48

RM1200-10 11 7⁄8" 1⁄2" 74 78 77 47 52

RM1200-12 13 7⁄8" 1⁄2" 83 91 80 50 58

RM1200-18 19 7⁄8" 1⁄2" 111 120 85 55 62

RM1200-24 25 7⁄8" 1⁄2" 127 138 97 66 75

RM1200-30 31 7⁄8" 1⁄2" 151 162 109 77 85

RM1210-5 6 7⁄8" 5⁄8" 85 90 67 37 43

RM1210-6 7 7⁄8" 5⁄8" 86 91 71 42 47

RM1210-7 8 7⁄8" 5⁄8" 86 92 78 48 55

RM1210-8 9 7⁄8" 5⁄8" 88 94 80 50 58

RM1210-10 11 7⁄8" 5⁄8" 100 109 82 52 60

RM1210-12 13 7⁄8" 5⁄8" 107 114 85 55 62

RM1210-18 19 7⁄8" 5⁄8" 147 158 101 72 80

RM1210-24 25 7⁄8" 5⁄8" 167 181 113 81 92

RM1210-30 31 7⁄8" 5⁄8" 200 218 122 89 99

Offset - Flat EndsRM1230-5 6 7⁄8" 5⁄8" 112 80 90

RM1230-6 7 7⁄8" 5⁄8" 113 81 91

RM1230-7 8 7⁄8" 5⁄8" 116 84 93

RM1230-8 9 7⁄8" 5⁄8" 120 88 99

RM1230-10 11 7⁄8" 5⁄8" 122 89 100

RM1230-12 13 7⁄8" 5⁄8" 124 91 102

RM1230-18 19 7⁄8" 5⁄8" 149 103 115

RM1230-24 25 7⁄8" 5⁄8" 165 116 130

RM1230-30 31 7⁄8" 5⁄8" 169 122 136

Straight - Round EndsRM1240-4 5 7⁄8" 1⁄2" 75 82 82 75 46 52

RM1240-5 6 7⁄8" 1⁄2" 76 83 83 77 47 54

RM1240-6 7 7⁄8" 1⁄2" 77 85 85 78 48 55

RM1240-8 9 7⁄8" 1⁄2" 81 88 88 82 52 58

RM1240-10 11 7⁄8" 1⁄2" 83 91 91 87 57 64

RM1240-12 13 7⁄8" 1⁄2" 90 95 95 92 62 69

RM1240-18 19 7⁄8" 1⁄2" 116 127 127 110 66 74

RM1240-24 25 7⁄8" 1⁄2" 137 147 147 117 74 82

RM1240-30 31 7⁄8" 1⁄2" 153 166 166 130 85 95

RM1250-5 6 7⁄8" 5⁄8" 90 95 87 57 64

RM1250-6 7 7⁄8" 5⁄8" 92 100 88 58 65

RM1250-7 8 7⁄8" 5⁄8" 94 104 89 60 66

RM1250-8 9 7⁄8" 5⁄8" 98 106 91 61 68

RM1250-10 11 7⁄8" 5⁄8" 109 116 93 63 70

RM1250-12 13 7⁄8" 5⁄8" 113 124 96 65 73

RM1250-18 19 7⁄8" 5⁄8" 151 164 109 77 87

RM1250-24 25 7⁄8" 5⁄8" 174 187 122 89 101

RM1250-30 31 7⁄8" 5⁄8" 204 219 127 95 105

Offset - Round EndsRM1270-5 6 7⁄8" 5⁄8" 124 92 102

RM1270-6 7 7⁄8" 5⁄8" 125 92 103

RM1270-7 8 7⁄8" 5⁄8" 126 93 104

RM1270-8 9 7⁄8" 5⁄8" 129 96 106

RM1270-10 11 7⁄8" 5⁄8" 130 98 108

RM1270-12 13 7⁄8" 5⁄8" 133 100 111

RM1270-18 19 7⁄8" 5⁄8" 149 114 128

RM1270-24 25 7⁄8" 5⁄8" 160 125 138

RM1270-30 31 7⁄8" 5⁄8" 165 129 143

RM1250

RM1230

RM1210

RM1270

Page 11: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 11

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

12

11

-RM

13

70

GR

OO

VE

/ S

MA

LL P

ULL

S (

w/G

RIP

ZO

NE)

Straight - Flat EndsPart Max OA Dia. 32/629

RM1300-4 5 7⁄8" 1⁄2" 66

RM1300-5 6 7⁄8" 1⁄2" 68

RM1300-6 7 7⁄8" 1⁄2" 69

RM1300-8 9 7⁄8" 1⁄2" 70

RM1300-10 11 7⁄8" 1⁄2" 73

RM1300-12 13 7⁄8" 1⁄2" 78

RM1300-18 19 7⁄8" 1⁄2" 82

RM1300-24 25 7⁄8" 1⁄2" 95

RM1300-30 31 7⁄8" 1⁄2" 104

Straight - Flat EndsRM1310-5 6 7⁄8" 5⁄8" 75

RM1310-6 7 7⁄8" 5⁄8" 76

RM1310-7 8 7⁄8" 5⁄8" 77

RM1310-8 9 7⁄8" 5⁄8" 78

RM1310-10 11 7⁄8" 5⁄8" 80

RM1310-12 13 7⁄8" 5⁄8" 82

RM1310-18 19 7⁄8" 5⁄8" 100

RM1310-24 25 7⁄8" 5⁄8" 110

RM1310-30 31 7⁄8" 5⁄8" 124

Offset - Flat EndsRM1330-5 6 7⁄8" 5⁄8" 110

RM1330-6 7 7⁄8" 5⁄8" 111

RM1330-7 8 7⁄8" 5⁄8" 112

RM1330-8 9 7⁄8" 5⁄8" 116

RM1330-10 11 7⁄8" 5⁄8" 118

RM1330-12 13 7⁄8" 5⁄8" 124

RM1330-18 19 7⁄8" 5⁄8" 136

RM1330-24 25 7⁄8" 5⁄8" 149

RM1330-30 31 7⁄8" 5⁄8" 159

Straight - Round EndsPart Max OA Dia. 32/629

RM1340-4 5 7⁄8" 1⁄2" 76

RM1340-5 6 7⁄8" 1⁄2" 77

RM1340-6 7 7⁄8" 1⁄2" 78

RM1340-8 9 7⁄8" 1⁄2" 80

RM1340-10 11 7⁄8" 1⁄2" 82

RM1340-12 13 7⁄8" 1⁄2" 91

RM1340-18 19 7⁄8" 1⁄2" 98

RM1340-24 25 7⁄8" 1⁄2" 104

RM1340-30 31 7⁄8" 1⁄2" 116

Straight - Round EndsRM1350-5 6 7⁄8" 5⁄8" 88

RM1350-6 7 7⁄8" 5⁄8" 89

RM1350-7 8 7⁄8" 5⁄8" 90

RM1350-8 9 7⁄8" 5⁄8" 91

RM1350-10 11 7⁄8" 5⁄8" 95

RM1350-12 13 7⁄8" 5⁄8" 98

RM1350-18 19 7⁄8" 5⁄8" 110

RM1350-24 25 7⁄8" 5⁄8" 124

RM1350-30 31 7⁄8" 5⁄8" 132

Offset - Round Ends RM1370-5 6 7⁄8" 5⁄8" 124

RM1370-6 7 7⁄8" 5⁄8" 125

RM1370-7 8 7⁄8" 5⁄8" 126

RM1370-8 9 7⁄8" 5⁄8" 128

RM1370-10 11 7⁄8" 5⁄8" 130

RM1370-12 13 7⁄8" 5⁄8" 132

RM1370-18 19 7⁄8" 5⁄8" 149

RM1370-24 25 7⁄8" 5⁄8" 159

RM1370-30 31 7⁄8" 5⁄8" 172

Groove - Small Pulls

Straight - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM1211-5 6 7⁄8" 5⁄8" 93 101 87 57 64

RM1211-6 7 7⁄8" 5⁄8" 94 102 88 58 65

RM1211-7 8 7⁄8" 5⁄8" 95 104 89 60 66

RM1211-8 9 7⁄8" 5⁄8" 98 106 91 61 68

RM1211-10 11 7⁄8" 5⁄8" 107 114 92 62 69

RM1211-12 13 7⁄8" 5⁄8" 112 123 96 65 73

GripZone - Small Pulls for Cabinets, Casework & Closet Doors

RM1300

RM1211

RM1330

RM1340

RM1370

Page 12: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.12

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

14

10

- R

M2

03

4S

MA

LL P

ULL

S (

NO

IRM

ET,

AR

BO

RM

ET

) /

ME

GA

CU

RV

E

NoirMet - Small Pulls

MegaCurve - Long Curved Pulls

• Add $6.50/in. over 96".

Mid Bow

PartMax OA

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM2000 72" 2,057 2,223 1,489 1,233 1,382 1,797 2,004

84" 2,126 2,297 1,553 1,294 1,448 1,885 2,102

96" 2,194 2,370 1,618 1,354 1,517 1,973 2,201

RM2004 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171

84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268

96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366

Long Bow PullsRM2010 72" 2,697 2,911 2,042 1,746 1,908 2,480 2,768

84" 2,764 2,985 2,107 1,763 1,975 2,567 2,865

96" 2,831 3,058 2,172 1,823 2,042 2,656 2,963

RM2014 72" 2,827 3,053 2,153 1,849 2,070 2,692 3,003

84" 2,896 3,127 2,219 1,909 2,138 2,780 3,101

96" 2,963 3,200 2,283 1,969 2,204 2,868 3,198

45˚ PullsRM2020 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171

84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268

96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366

RM2024 72" 2,315 2,501 1,709 1,438 1,611 2,095 2,336

84" 2,383 2,573 1,775 1,499 1,679 2,183 2,435

96" 2,451 2,647 1,840 1,558 1,745 2,271 2,532

Triangle PullsRM2030 72" 2,187 2,361 1,598 1,336 1,497 1,946 2,171

84" 2,254 2,435 1,664 1,396 1,563 2,034 2,268

96" 2,322 2,508 1,728 1,455 1,632 2,121 2,366

RM2034 72" 2,315 2,501 1,709 1,438 1,611 2,095 2,336

84" 2,383 2,573 1,775 1,499 1,679 2,183 2,435

96" 2,451 2,647 1,840 1,558 1,745 2,271 2,532

Straight - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC10BE 32D/630 32/629

RM1410-5 6 7⁄8" 5⁄8" 147 160 109 77 85

RM1410-6 7 7⁄8" 5⁄8" 151 164 111 79 89

Offset - Flat EndsRM1430-5 6 7⁄8" 5⁄8" 156 122 137

RM1430-6 7 7⁄8" 5⁄8" 160 125 139

Straight - Round EndsRM1450-5 6 7⁄8" 5⁄8" 175 189 129 96 106

RM1450-6 7 7⁄8" 5⁄8" 179 191 133 100 110

Offset - Round EndsRM1470-5 6 7⁄8" 5⁄8" 180 141 159

RM1470-6 7 7⁄8" 5⁄8" 185 146 166

ArborMet - Small Pulls

Straight - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC10BE 32D/630 32/629

RM1510-5 6 7⁄8" 5⁄8" 155 167 113 81 93

RM1510-6 7 7⁄8" 5⁄8" 158 171 117 85 98

Offset - Flat EndsRM1530-5 6 7⁄8" 5⁄8" 165 129 145

RM1530-6 7 7⁄8" 5⁄8" 168 132 152

Straight - Round EndsRM1550-5 6 7⁄8" 5⁄8" 182 197 138 104 117

RM1550-6 7 7⁄8" 5⁄8" 187 200 142 107 124

Offset - Round EndsRM1570-5 6 7⁄8" 5⁄8" 187 150 171

RM1570-6 7 7⁄8" 5⁄8" 190 152 176

RM1410

RM1510

RM1470

RM1570

RM2014

RM2034

RM2020

RM2000

Page 13: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 13

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

21

10

- R

M2

15

0M

EZ

ZO

TE

K

MezzoTek - Necked Post Pulls

Straight Pulls without GripZone

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM2110 12" 1 1⁄4" 591 640 348 230 258 335 374

24" 1 1⁄4" 640 691 410 287 321 419 467

36" 1 1⁄4" 688 743 470 344 385 502 561

48" 1 1⁄4" 735 794 533 402 450 586 654

60" 1 1⁄4" 766 827 574 439 492 642 714

72" 1 1⁄4" 798 862 638 477 535 697 776

84" 1 1⁄4" 830 896 680 515 578 753 838

96" 1 1⁄4" 861 930 721 553 620 808 901

RM2120 12" 1 1⁄2" 643 694 360 242 271 354 393

24" 1 1⁄2" 691 746 423 300 336 437 488

36" 1 1⁄2" 738 798 485 356 400 520 581

48" 1 1⁄2" 787 849 546 414 464 603 674

60" 1 1⁄2" 818 883 587 451 506 658 734

72" 1 1⁄2" 849 918 652 489 547 713 796

84" 1 1⁄2" 881 952 693 527 589 769 856

96" 1 1⁄2" 913 986 734 564 633 825 918

Push Bars without GripZoneRM2112 Up to 36" CTC 1 1⁄4" 688 743 470 344 385 502 561

RM2122 Up to 36" CTC 1 1⁄2" 738 798 485 356 400 520 581

Straight Pulls with GripZone

Part Max OA Dia. 3/605 9/611 32/629 32316

RM2130 12" 1 1⁄4" 718 811 372 551

24" 1 1⁄4" 765 864 436 644

36" 1 1⁄4" 812 919 502 738

48" 1 1⁄4" 861 972 564 828

60" 1 1⁄4" 893 1,009 608 887

72" 1 1⁄4" 923 1,044 649 949

84" 1 1⁄4" 955 1,080 692 1,008

96" 1 1⁄4" 987 1,115 734 1,070

RM2140 12" 1 1⁄2" 769 869 385 605

24" 1 1⁄2" 817 923 450 710

36" 1 1⁄2" 864 976 514 814

48" 1 1⁄2" 913 1,030 579 918

60" 1 1⁄2" 942 1,067 620 987

72" 1 1⁄2" 974 1,102 662 1,057

84" 1 1⁄2" 1,007 1,136 705 1,125

96" 1 1⁄2" 1,038 1,172 748 1,196

Push Bars with GripZoneRM2132 Up to 36" CTC 1 1⁄4" 812 919 502 738

RM2142 Up to 36" CTC 1 1⁄2" 864 976 514 814

Double Stepped Post Pulls

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM2150 12" 1" 458 495 372 251 283 368 410

24" 1" 531 575 434 310 347 452 504

36" 1" 604 653 496 367 411 535 598

48" 1" 677 731 558 425 476 619 691

60" 1" 749 810 625 462 518 675 753

72" 1" 823 888 665 502 560 730 814

84" 1" 896 968 706 539 604 787 876

96" 1" 969 1,046 747 577 645 842 938

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Pulls with GripZone offer an additional aesthetic look, not a tactile feel. The grip zones are satin, the post and end

sections are polished. US10B finish is not available on GripZone pulls.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM2132

RM2112

RM2110

RM2130

RM2150

Page 14: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.14

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

22

00

- R

M2

24

0B

AN

DW

IDT

H

BandWidth - Collar Mount Pulls

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Specify finish of grip and collar.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow

& medium stile doors and 1" from end for flush and wide stile doors.

Straight Pulls - Flat Ends

Part Max OA Dia.3/6054/606

10/61210B/613

Stock PC10BE 32D/630 32/629

RM2200 12" 1" 599 648 536 401 448

24" 1" 696 750 585 446 501

36" 1" 795 858 659 491 550

48" 1" 893 964 708 537 600

60" 1" 990 1,068 741 565 634

72" 1" 1,087 1,174 773 596 667

84" 1" 1,185 1,279 804 626 700

96" 1" 1,284 1,385 837 655 734

RM2210 12" 1 1⁄4" 641 692 551 413 464

24" 1 1⁄4" 736 795 599 458 514

36" 1 1⁄4" 831 898 673 505 564

48" 1 1⁄4" 924 999 721 548 615

60" 1 1⁄4" 1,019 1,102 754 579 647

72" 1 1⁄4" 1,115 1,202 785 609 680

84" 1 1⁄4" 1,209 1,306 818 639 715

96" 1 1⁄4" 1,304 1,409 849 667 748

Offset Pulls - Flat Ends

RM2230 12" 1" 653 705 580 441 493

24" 1" 749 811 654 487 545

36" 1" 848 916 704 533 596

48" 1" 948 1,022 753 577 646

60" 1" 1,043 1,127 784 608 679

72" 1" 1,142 1,233 817 638 714

84" 1" 1,238 1,338 848 666 747

96" 1" 1,337 1,444 882 696 780

RM2240 12" 1 1⁄4" 695 749 593 454 510

24" 1 1⁄4" 789 851 669 501 559

36" 1 1⁄4" 884 956 718 545 611

48" 1 1⁄4" 977 1,056 765 588 659

60" 1 1⁄4" 1,074 1,160 797 619 692

72" 1 1⁄4" 1,167 1,261 831 649 726

84" 1 1⁄4" 1,262 1,363 861 678 759

96" 1 1⁄4" 1,357 1,465 894 709 793

RM2240

RM2210

Page 15: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 15

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

22

02

- R

M2

24

4B

AN

DW

IDT

H

BandWidth - Collar Mount Pulls (con't)

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Specify finish of grip and collar.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow

& medium stile doors and 1" from end for flush and wide stile doors.

Straight Pulls - Round Ends

Part Max OA Dia.3/6054/606

10/61210B/613

Stock PC10BE 32D/630 32/629

RM2204 12" 1" 712 770 588 448 503

24" 1" 811 876 662 493 553

36" 1" 909 981 710 539 605

48" 1" 1,007 1,087 760 584 654

60" 1" 1,103 1,193 793 615 688

72" 1" 1,201 1,299 823 644 722

84" 1" 1,300 1,403 857 674 755

96" 1" 1,397 1,509 888 703 787

RM2214 12" 1 1⁄4" 756 816 602 461 516

24" 1 1⁄4" 849 918 676 507 568

36" 1 1⁄4" 943 1,019 725 552 619

48" 1 1⁄4" 1,040 1,123 773 596 667

60" 1 1⁄4" 1,134 1,225 804 626 700

72" 1 1⁄4" 1,229 1,326 837 655 734

84" 1 1⁄4" 1,324 1,429 869 686 768

96" 1 1⁄4" 1,418 1,531 902 716 801

Offset Pulls - Round Ends

RM2234 12" 1" 766 828 656 489 547

24" 1" 864 933 706 535 598

36" 1" 962 1,040 755 580 649

48" 1" 1,060 1,145 803 625 699

60" 1" 1,158 1,250 836 654 733

72" 1" 1,255 1,355 868 685 767

84" 1" 1,353 1,462 901 715 800

96" 1" 1,452 1,567 932 745 833

RM2244 12" 1 1⁄4" 809 875 671 503 562

24" 1 1⁄4" 903 975 720 547 613

36" 1 1⁄4" 999 1,079 769 592 664

48" 1 1⁄4" 1,092 1,180 817 638 714

60" 1 1⁄4" 1,187 1,284 848 666 747

72" 1 1⁄4" 1,282 1,384 882 696 780

84" 1 1⁄4" 1,378 1,487 912 726 814

96" 1 1⁄4" 1,471 1,589 945 756 847

Push Bars - Flat Ends

RM2202 Up to 36" CTC 1" 795 858 659 491 550

RM2212 Up to 36" CTC 1 1⁄4" 831 898 673 505 564

Push Bars - Round Ends

RM2206 Up to 36" CTC 1" 909 981 710 539 605

RM2216 Up to 36" CTC 1 1⁄4" 943 1,019 725 552 619

RM2244

RM2214

RM2212

RM2216

Page 16: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.16

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

OV

ALT

EK

RM

23

00

-RM

23

30

OvalTek - True Oval Grip

• RM2310 pulls add $7.60/in. over 96".

• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM2320

RM2300

Straight Pulls

Part Max OA SizeStock PC

10BE 32D/630 32/629

RM2300 12" 1" x 1 1⁄2" 508 375 421

24" 1" x 1 1⁄2" 573 436 488

36" 1" x 1 1⁄2" 664 497 556

48" 1" x 1 1⁄2" 728 556 623

60" 1" x 1 1⁄2" 794 617 690

72" 1" x 1 1⁄2" 859 677 758

84" 1" x 1 1⁄2" 924 737 826

96" 1" x 1 1⁄2" 988 797 892

Offset Pulls

RM2320 12" 1" x 1 1⁄2" 553 417 467

24" 1" x 1 1⁄2" 644 477 535

36" 1" x 1 1⁄2" 708 538 602

48" 1" x 1 1⁄2" 774 597 670

60" 1" x 1 1⁄2" 838 658 737

72" 1" x 1 1⁄2" 904 719 803

84" 1" x 1 1⁄2" 968 778 872

96" 1" x 1 1⁄2" 1,033 838 939

Straight Pulls

RM2310 12" 1 1⁄8" x 1 7⁄8" 527 394 440

24" 1 1⁄8" x 1 7⁄8" 601 461 517

36" 1 1⁄8" x 1 7⁄8" 700 530 593

48" 1 1⁄8" x 1 7⁄8" 775 599 671

60" 1 1⁄8" x 1 7⁄8" 848 667 748

72" 1 1⁄8" x 1 7⁄8" 922 735 825

84" 1 1⁄8" x 1 7⁄8" 998 804 901

96" 1 1⁄8" x 1 7⁄8" 1,071 873 979

Offset Pulls

RM2330 12" 1 1⁄8" x 1 7⁄8" 571 435 487

24" 1 1⁄8" x 1 7⁄8" 671 504 563

36" 1 1⁄8" x 1 7⁄8" 746 571 641

48" 1 1⁄8" x 1 7⁄8" 819 641 718

60" 1 1⁄8" x 1 7⁄8" 893 709 794

72" 1 1⁄8" x 1 7⁄8" 967 777 871

84" 1 1⁄8" x 1 7⁄8" 1,042 847 948

96" 1 1⁄8" x 1 7⁄8" 1,115 914 1,023

Push Bars

RM2302 Up to 36" CTC 1" x 1 1⁄2" 664 497 556

RM2312 Up to 36" CTC 1 1⁄8" x 1 7⁄8" 700 530 593RM2302

Page 17: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 17

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

24

00

-RM

24

20

OV

ALT

EK

OvalTek - Flat Oval Grip

Straight Pulls - Small Round Posts

Part Max OA SizeStock PC

10BE 32D/630 32/629

RM2400 12" 3⁄4" x 1 1⁄2" 562 426 477

24" 3⁄4" x 1 1⁄2" 676 508 569

36" 3⁄4" x 1 1⁄2" 764 589 660

48" 3⁄4" x 1 1⁄2" 852 671 752

60" 3⁄4" x 1 1⁄2" 941 752 843

72" 3⁄4" x 1 1⁄2" 1,028 834 934

84" 3⁄4" x 1 1⁄2" 1,116 915 1,025

96" 3⁄4" x 1 1⁄2" 1,230 996 1,117

Straight Pulls - Large Round Posts

RM2410 12" 3⁄4" x 1 1⁄2" 608 467 524

24" 3⁄4" x 1 1⁄2" 721 550 616

36" 3⁄4" x 1 1⁄2" 810 631 707

48" 3⁄4" x 1 1⁄2" 897 713 797

60" 3⁄4" x 1 1⁄2" 985 794 889

72" 3⁄4" x 1 1⁄2" 1,073 876 981

84" 3⁄4" x 1 1⁄2" 1,187 957 1,071

96" 3⁄4" x 1 1⁄2" 1,276 1,039 1,163

Straight Pulls - Oblong Posts

RM2420 12" 3⁄4" x 1 1⁄2" 761 586 657

24" 3⁄4" x 1 1⁄2" 848 667 748

36" 3⁄4" x 1 1⁄2" 936 749 838

48" 3⁄4" x 1 1⁄2" 1,025 831 931

60" 3⁄4" x 1 1⁄2" 1,113 912 1,021

72" 3⁄4" x 1 1⁄2" 1,225 993 1,112

84" 3⁄4" x 1 1⁄2" 1,315 1,075 1,204

96" 3⁄4" x 1 1⁄2" 1,403 1,157 1,295

Push Bar - Large Round Posts

RM2402 Up to 36" CTC 3⁄4" x 1 1⁄2" 810 631 707

• RM2410 pulls add $7.60/in. over 96".

• MP (Mid Post) - Add $108 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM2400

RM2410

RM2420

RM2402

Page 18: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.18

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

25

10

-RM

26

40

SO

FT

ME

T /

SO

FT

TE

K

SoftMet - Santoprene™ GripStraight Pulls - Flat Ends

PartMax OA Dia.

3/605 4/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM2510 12" 1 1⁄4" 492 531 485 352 396

24" 1 1⁄4" 637 688 605 462 519

36" 1 1⁄4" 781 844 750 574 643

48" 1 1⁄4" 925 1,000 857 685 767

60" 1 1⁄4" 1,071 1,156 977 795 890

72" 1 1⁄4" 1,216 1,312 1,118 905 1,014

84" 1 1⁄4" 1,360 1,468 1,238 1,016 1,139

Offset Pulls - Flat EndsRM2540 12" 1 1⁄4" 541 583 531 396 443

24" 1 1⁄4" 686 739 675 506 565

36" 1 1⁄4" 828 896 796 617 690

48" 1 1⁄4" 973 1,050 903 727 815

60" 1 1⁄4" 1,118 1,206 1,022 837 938

72" 1 1⁄4" 1,262 1,364 1,164 948 1,062

84" 1 1⁄4" 1,407 1,520 1,283 1,059 1,185

Straight Pulls - Round EndsRM2514 12" 1 1⁄4" 602 650 537 401 449

24" 1 1⁄4" 746 806 683 512 573

36" 1 1⁄4" 890 961 801 622 696

48" 1 1⁄4" 1,035 1,118 908 732 821

60" 1 1⁄4" 1,180 1,274 1,027 843 943

72" 1 1⁄4" 1,324 1,430 1,170 954 1,068

84" 1 1⁄4" 1,468 1,587 1,288 1,064 1,191

Offset Pulls - Round EndsRM2544 12" 1 1⁄4" 650 701 582 443 496

24" 1 1⁄4" 794 858 728 554 620

36" 1 1⁄4" 938 1,013 847 664 745

48" 1 1⁄4" 1,083 1,169 953 775 867

60" 1 1⁄4" 1,229 1,326 1,096 885 991

72" 1 1⁄4" 1,373 1,482 1,216 995 1,114

84" 1 1⁄4" 1,517 1,638 1,335 1,105 1,238

Push BarsRM2512 Up to 36" CTC 1 1⁄4" 781 844 750 574 643

RM2516 Up to 36" CTC 1 1⁄4" 890 961 801 622 696

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

SoftTek - Santoprene™ GripStraight Pulls

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM2610 12" 1 1⁄4" 443 479 470 340 380

24" 1 1⁄4" 580 625 586 446 500

36" 1 1⁄4" 717 773 726 551 618

48" 1 1⁄4" 853 921 826 657 735

60" 1 1⁄4" 990 1,068 941 762 855

72" 1 1⁄4" 1,126 1,217 1,078 868 972

84" 1 1⁄4" 1,262 1,363 1,193 974 1,093

Offset PullsRM2640 12" 1 1⁄4" 491 530 517 382 427

24" 1 1⁄4" 626 677 656 488 546

36" 1 1⁄4" 764 825 772 592 664

48" 1 1⁄4" 900 972 872 698 783

60" 1 1⁄4" 1,037 1,120 986 804 901

72" 1 1⁄4" 1,173 1,268 1,125 911 1,020

84" 1 1⁄4" 1,310 1,416 1,239 1,017 1,140

Push BarRM2612 Up to 36" CTC 1 1⁄4" 717 773 726 551 618

RM2510

RM2514

RM2544

RM2512

RM2516

RM2540

RM2610

RM2640

RM2612 *Santoprene™ is a registered trademark of the Exxon Mobil Corporation.

Page 19: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 19

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

30

10

- R

M3

13

1N

EO

ME

TR

IX /

GR

OO

VE

NeoMetrix - with GripZone

Straight Pulls

Part CTC Dia. 3/605 9/611 32/629 32316

RM3010 12" 1" 409 461 236 385

24" 1" 505 569 287 466

36" 1" 600 677 337 549

RM3020 12" 1 1⁄4" 447 505 249 407

24" 1 1⁄4" 540 610 301 490

36" 1 1⁄4" 633 716 350 570

RM3030 12" 1 1⁄2" 524 591 278 453

24" 1 1⁄2" 612 690 332 541

36" 1 1⁄2" 697 788 387 630

Offset Pulls

Part CTC Dia. 3/605 9/611 32/629 32316

RM3040 12" 1" 456 514 274 444

24" 1" 551 623 324 528

36" 1" 648 731 374 610

RM3050 12" 1 1⁄4" 495 559 288 469

24" 1 1⁄4" 586 663 339 550

36" 1 1⁄4" 681 770 389 631

RM3060 12" 1 1⁄2" 572 647 316 515

24" 1 1⁄2" 658 744 370 601

36" 1 1⁄2" 745 843 425 691

Push Bars - 7" Grip

RM3012 Up to 36" 1" 600 677 337 549

RM3022 Up to 36" 1 1⁄4" 633 716 350 570

RM3032 Up to 36" 1 1⁄2" 697 788 387 630

NOTE: Post location on push bars can be

located 1⁄8" from end for narrow & medium

stile doors and 1" from end for flush and

wide stile doors.

RM3020

RM3050

RM3022

Groove - Straight & Offset Pulls

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM3101 12" 1" 473 510 278 198 221

24" 1" 524 565 365 243 273

36" 1" 573 619 414 288 322

48" 1" 623 673 462 333 373

60" 1" 656 709 495 363 406

72" 1" 690 744 526 392 439

84" 1" 723 780 558 422 473

96" 1" 756 816 589 451 506

Offset Pulls - Flat Ends

RM3131 12" 1" 519 561 322 240 268

24" 1" 569 615 410 285 319

36" 1" 619 669 459 330 369

48" 1" 670 724 506 374 420

60" 1" 703 760 539 404 452

72" 1" 736 795 570 434 485

84" 1" 769 830 602 462 518

96" 1" 802 865 659 492 552

RM3101

RM3131

Page 20: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.20

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

33

00

- R

M3

31

2M

EG

AT

EK

MegaTek - Straight & Offset PostMount Pulls

Straight Pulls - Flat Ends (87" max overall in aluminum, specify CTC and overall length.)

PartMax OA Dia. 28/628

313/710315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM3300 12" 1" 148 164 392 424 218 145 163 213 238

24" 1" 194 208 439 474 265 190 212 277 310

36" 1" 239 256 487 527 349 233 260 339 379

48" 1" 259 307 534 577 395 276 310 404 452

60" 1" 290 337 565 611 426 306 341 444 499

72" 1" 320 368 595 643 458 334 373 486 545

84" 1" 351 400 625 677 487 361 406 528 592

96" 1" 657 710 518 391 437 570 639

RM3301 12" 1 1⁄4" 169 186 410 443 233 158 179 232 260

24" 1 1⁄4" 216 233 457 494 278 202 226 295 330

36" 1 1⁄4" 261 278 504 545 363 246 275 359 402

48" 1 1⁄4" 307 356 550 595 407 289 321 420 470

60" 1 1⁄4" 337 387 582 629 439 316 354 461 517

72" 1 1⁄4" 368 418 613 661 468 345 387 504 563

84" 1 1⁄4" 400 447 643 695 500 373 418 545 611

96" 1 1⁄4" 674 729 531 403 450 587 656

RM3302 12" 1 1⁄2" 196 265 427 462 247 173 194 251 282

24" 1 1⁄2" 240 312 474 513 294 216 242 316 353

36" 1 1⁄2" 288 357 520 564 377 258 291 378 423

48" 1 1⁄2" 366 404 567 614 421 300 337 439 492

60" 1 1⁄2" 396 435 599 648 452 329 368 479 538

72" 1 1⁄2" 426 464 630 681 483 357 402 522 585

84" 1 1⁄2" 457 495 660 714 513 387 432 563 631

96" 1 1⁄2" 691 748 543 414 465 604 678

Offset Pulls - Flat Ends (Specify CTC and overall length.)

RM3310 12" 1" 183 199 436 471 253 179 200 250 276

24" 1" 228 243 483 522 299 221 248 314 348

36" 1" 274 291 530 572 383 265 297 377 416

48" 1" 292 339 577 622 427 307 342 439 485

60" 1" 323 371 607 656 459 335 374 479 533

72" 1" 353 402 639 689 488 363 407 522 580

84" 1" 384 431 669 723 519 392 438 563 627

96" 1" 700 756 551 421 470 604 673

RM3311 12" 1 1⁄4" 204 221 453 488 267 193 215 269 297

24" 1 1⁄4" 252 268 499 538 351 235 263 332 365

36" 1 1⁄4" 296 315 546 588 397 278 312 395 439

48" 1 1⁄4" 339 389 593 640 441 318 356 455 505

60" 1 1⁄4" 371 420 623 673 470 347 389 497 551

72" 1 1⁄4" 402 450 655 706 503 375 421 538 597

84" 1 1⁄4" 431 480 686 739 533 405 452 580 645

96" 1 1⁄4" 717 773 563 432 483 622 691

RM3312 12" 1 1⁄2" 230 300 470 507 281 204 228 289 319

24" 1 1⁄2" 275 347 516 558 365 248 277 352 391

36" 1 1⁄2" 323 392 563 607 412 292 326 415 460

48" 1 1⁄2" 400 437 610 659 453 330 369 473 526

60" 1 1⁄2" 428 466 640 692 484 358 403 513 572

72" 1 1⁄2" 460 497 672 725 515 388 434 555 618

84" 1 1⁄2" 491 528 703 758 544 415 466 597 666

96" 1 1⁄2" 734 792 576 445 498 641 712

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under

RM3300-RM3302.

RM3301

RM3311

Page 21: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 21

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

33

20

- R

M3

33

2M

EG

AT

EK

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• HF (Hands-Free) Post - Add $28 each (Available on straight post only.)

Order form available on website under RM3320-RM3322.

MegaTek - Straight & Offset PostMount Pulls (con't)

Straight Pulls - Round Ends (90" max overall in aluminum, specify CTC and overall length.)

PartMax OA Dia. 28/628

313/710315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM3320 12" 1" 186 202 487 527 260 185 207 270 300

24" 1" 233 248 534 577 344 228 255 333 374

36" 1" 278 294 581 626 391 272 306 395 444

48" 1" 299 349 626 678 434 312 349 455 509

60" 1" 329 379 658 711 464 340 383 497 555

72" 1" 360 409 689 744 495 368 413 538 603

84" 1" 390 439 720 778 526 398 446 580 649

96" 1" 750 811 557 426 476 622 695

RM3321 12" 1 1⁄4" 210 226 504 545 275 199 222 290 326

24" 1 1⁄4" 258 272 550 595 358 242 270 353 394

36" 1 1⁄4" 304 319 597 647 405 287 319 416 467

48" 1 1⁄4" 349 397 644 696 446 324 363 473 530

60" 1 1⁄4" 379 427 676 730 478 353 396 515 576

72" 1 1⁄4" 409 459 706 763 508 383 427 555 623

84" 1 1⁄4" 439 490 737 797 539 410 458 599 671

96" 1 1⁄4" 769 830 569 438 492 641 716

RM3322 12" 1 1⁄2" 234 252 520 564 302 224 252 328 366

24" 1 1⁄2" 280 296 567 614 387 268 300 392 439

36" 1 1⁄2" 326 344 614 666 434 312 349 455 509

48" 1 1⁄2" 366 404 661 716 471 348 391 508 570

60" 1 1⁄2" 396 435 693 749 504 376 423 550 616

72" 1 1⁄2" 426 464 723 782 534 406 454 592 662

84" 1 1⁄2" 457 495 754 816 564 434 487 632 710

96" 1 1⁄2" 785 849 621 462 519 675 756

Offset Pulls - Round Ends (Specify CTC and overall length.)

RM3330 12" 1" 220 236 528 569 296 218 244 306 336

24" 1" 266 283 575 620 379 261 293 368 410

36" 1" 313 328 621 670 426 306 341 432 481

48" 1" 331 380 668 722 466 342 385 487 544

60" 1" 361 410 699 755 497 370 415 530 589

72" 1" 391 441 730 788 529 400 448 571 638

84" 1" 422 471 761 822 559 428 478 613 683

96" 1" 792 854 613 456 512 655 729

RM3331 12" 1 1⁄4" 245 260 545 587 347 231 257 326 361

24" 1 1⁄4" 292 306 591 639 393 274 308 390 431

36" 1 1⁄4" 337 353 639 689 440 317 355 453 502

48" 1 1⁄4" 380 428 686 739 480 354 397 506 563

60" 1 1⁄4" 410 460 717 773 509 384 428 549 611

72" 1 1⁄4" 441 491 747 807 540 411 459 589 656

84" 1 1⁄4" 471 521 778 841 571 439 493 631 705

96" 1 1⁄4" 809 873 627 468 524 673 750

RM3332 12" 1 1⁄2" 268 285 562 606 375 257 290 363 404

24" 1 1⁄2" 315 331 608 658 422 301 338 427 474

36" 1 1⁄2" 360 377 656 708 468 345 387 491 546

48" 1 1⁄2" 397 436 703 758 505 377 424 541 603

60" 1 1⁄2" 427 465 734 792 536 407 455 584 649

72" 1 1⁄2" 459 496 764 826 565 435 488 626 695

84" 1 1⁄2" 490 527 795 860 623 464 520 666 742

96" 1 1⁄2" 826 893 652 493 551 709 790

RM3321

RM3331

Page 22: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.22

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

33

40

- R

M3

34

2M

EG

AT

EK

MegaTek - Straight & Offset PostMount Pulls (con't)

Straight Pulls - Bent Ends (86" max CTC in aluminum, specify CTC.)

Part CTC Dia. 28/628313/710315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM3340 12" 1" 140 154 326 353 205 134 150 195 217

24" 1" 176 196 374 404 252 177 199 258 290

36" 1" 214 235 422 455 298 220 247 321 360

48" 1" 250 274 467 505 382 263 296 384 432

60" 1" 287 316 510 550 402 282 316 412 461

72" 1" 323 355 550 595 421 300 337 439 492

84" 1" 358 394 651 703 461 337 376 491 550

96" 1" 750 811 499 371 416 544 609

RM3341 12" 1 1⁄4" 152 168 392 424 218 145 163 213 238

24" 1 1⁄4" 188 207 439 474 265 190 212 277 310

36" 1 1⁄4" 225 248 487 527 349 233 260 339 379

48" 1 1⁄4" 261 289 534 577 395 276 310 404 452

60" 1 1⁄4" 298 328 576 621 415 295 329 428 479

72" 1 1⁄4" 334 368 618 667 434 312 349 455 509

84" 1 1⁄4" 371 409 726 784 471 348 390 507 567

96" 1 1⁄4" 835 901 511 385 429 561 627

RM3342 12" 1 1⁄2" 170 187 476 514 257 182 203 266 296

24" 1 1⁄2" 206 227 524 566 302 224 252 328 366

36" 1 1⁄2" 242 268 570 616 387 268 300 392 439

48" 1 1⁄2" 280 307 618 667 434 312 349 455 509

60" 1 1⁄2" 317 349 660 712 446 324 363 473 530

72" 1 1⁄2" 353 388 703 760 460 336 375 490 549

84" 1 1⁄2" 389 427 803 865 499 371 416 541 609

96" 1 1⁄2" 901 973 537 408 456 594 666

Push Bars - Flat Ends

RM3102 Up to 36" CTC 1" 239 256 487 527 349 233 260 339 379

RM3112 Up to 36" CTC 1 1⁄4" 261 278 504 545 363 246 275 359 402

RM3122 Up to 36" CTC 1 1⁄2" 288 357 520 564 377 258 291 378 423

Push Bars - Round Ends

RM3106 Up to 36" CTC 1" 278 294 581 626 391 272 306 395 444

RM3116 Up to 36" CTC 1 1⁄4" 304 319 597 647 405 287 319 416 467

RM3126 Up to 36" CTC 1 1⁄2" 326 344 614 666 434 312 349 455 509

Straight Pulls - Flat Ends - Back-to-Back Mounting

Part CTC OA Dia. 32D/630

RM3301BTB1224.32D 12" 24" 1 1⁄4" 424

RM3301BTB2436.32D 24" 36" 1 1⁄4" 512

RM3301BTB3648.32D 36" 48" 1 1⁄4" 598

RM3301BTB4860.32D 48" 60" 1 1⁄4" 653

RM3301BTB6072.32D 60" 72" 1 1⁄4" 710

RM3301BTB7284.32D 72" 84" 1 1⁄4" 767

RM3301BTB8496.32D 84" 96" 1 1⁄4" 826

• Add $6.50/in. over 96".

• Add $6.50/in. over 36" on Push Bars.

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from

end for flush and wide stile doors.

• Mounting included for both 1 3/4" wood or metal doors and 1/2" glass doors.

Quick Ship MegaTek - Straight PostMount Pulls

RM3341

RM3116

RM3301BTB

RM3112

Page 23: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 23

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

34

00

- R

M3

41

2N

EO

MA

X

NeoMax - Post Mounted GripZone

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

Straight Pulls - Flat EndsPart Max OA Dia. 3/605 9/611 32/629 32316

RM3400 12" 1" 370 417 202 288

24" 1" 465 526 251 359

36" 1" 561 634 302 432

48" 1" 656 742 352 504

60" 1" 753 849 403 577

72" 1" 848 957 453 649

84" 1" 942 1,067 504 720

96" 1" 1,040 1,174 554 793

RM3401 12" 1 1⁄4" 409 462 215 351

24" 1 1⁄4" 500 566 266 432

36" 1 1⁄4" 594 670 316 504

48" 1 1⁄4" 687 775 367 596

60" 1 1⁄4" 780 881 417 677

72" 1 1⁄4" 872 986 467 760

84" 1 1⁄4" 966 1,090 517 842

96" 1 1⁄4" 1,057 1,196 568 922

RM3402 12" 1 1⁄2" 485 547 243 348

24" 1 1⁄2" 572 647 298 424

36" 1 1⁄2" 658 744 352 514

48" 1 1⁄2" 745 844 406 582

60" 1 1⁄2" 834 940 460 660

72" 1 1⁄2" 920 1,040 515 736

84" 1 1⁄2" 1,007 1,137 570 815

96" 1 1⁄2" 1,093 1,236 623 891

Offset Pulls - Flat Ends

RM3410 12" 1" 417 472 239 341

24" 1" 512 580 289 412

36" 1" 607 688 340 485

48" 1" 705 797 390 558

60" 1" 801 903 440 630

72" 1" 897 1,012 490 702

84" 1" 992 1,121 541 774

96" 1" 1,088 1,230 590 845

RM3411 12" 1 1⁄4" 456 516 252 361

24" 1 1⁄4" 548 620 303 434

36" 1 1⁄4" 642 725 353 505

48" 1 1⁄4" 734 830 404 578

60" 1 1⁄4" 827 934 454 650

72" 1 1⁄4" 920 1,040 505 722

84" 1 1⁄4" 1,013 1,145 555 794

96" 1 1⁄4" 1,106 1,250 606 865

RM3412 12" 1 1⁄2" 532 602 282 402

24" 1 1⁄2" 620 700 334 479

36" 1 1⁄2" 707 799 390 558

48" 1 1⁄2" 794 897 444 635

60" 1 1⁄2" 881 995 500 713

72" 1 1⁄2" 968 1,093 552 791

84" 1 1⁄2" 1,055 1,194 608 868

96" 1 1⁄2" 1,143 1,290 661 946

RM3401

RM3411

Page 24: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.24

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

34

20

- R

M3

43

2N

EO

MA

X

Straight Pulls - Round EndsPart Max OA Dia. 3/605 9/611 32/629 32316

RM3420 12" 1" 473 534 241 346

24" 1" 569 643 291 418

36" 1" 664 750 342 490

48" 1" 761 859 392 562

60" 1" 856 968 443 632

72" 1" 953 1,076 492 704

84" 1" 1,047 1,184 543 777

96" 1" 1,144 1,291 592 849

RM3421 12" 1 1⁄4" 511 579 255 364

24" 1 1⁄4" 604 685 305 437

36" 1 1⁄4" 697 788 355 509

48" 1 1⁄4" 790 893 406 582

60" 1 1⁄4" 883 997 456 653

72" 1 1⁄4" 975 1,103 507 726

84" 1 1⁄4" 1,070 1,208 557 796

96" 1 1⁄4" 1,162 1,312 608 868

RM3422 12" 1 1⁄2" 588 666 284 406

24" 1 1⁄2" 676 764 337 481

36" 1 1⁄2" 763 861 392 562

48" 1 1⁄2" 849 960 446 638

60" 1 1⁄2" 936 1,059 502 716

72" 1 1⁄2" 1,025 1,156 555 794

84" 1 1⁄2" 1,111 1,256 610 873

96" 1 1⁄2" 1,198 1,354 663 949

Offset Pulls - Round Ends

RM3430 12" 1" 522 588 278 400

24" 1" 617 696 329 471

36" 1" 711 806 379 541

48" 1" 808 914 430 615

60" 1" 903 1,020 479 686

72" 1" 1,000 1,130 530 759

84" 1" 1,094 1,238 580 830

96" 1" 1,193 1,346 631 903

RM3431 12" 1 1⁄4" 562 634 293 419

24" 1 1⁄4" 654 739 343 491

36" 1 1⁄4" 747 845 393 563

48" 1 1⁄4" 840 950 444 635

60" 1 1⁄4" 933 1,054 493 706

72" 1 1⁄4" 1,026 1,159 544 778

84" 1 1⁄4" 1,119 1,262 593 851

96" 1 1⁄4" 1,211 1,367 645 922

RM3432 12" 1 1⁄2" 637 720 320 459

24" 1 1⁄2" 724 817 374 535

36" 1 1⁄2" 811 917 430 615

48" 1 1⁄2" 898 1,014 483 691

60" 1 1⁄2" 986 1,113 538 771

72" 1 1⁄2" 1,072 1,211 591 848

84" 1 1⁄2" 1,159 1,310 647 925

96" 1 1⁄2" 1,247 1,409 700 1,003

RM3421

RM3431

NeoMax - Post Mounted GripZone (con't)

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

Page 25: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 25

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

NeoMax - Post Mounted GripZone (con't)

Straight Pulls - Bent Ends (Specify CTC.)Part CTC Dia. 3/605 9/611 32/629 32316

RM3440 12" 1" 409 462 236 338

24" 1" 505 569 287 410

36" 1" 600 677 337 481

48" 1" 695 785 387 553

60" 1" 792 894 437 626

72" 1" 887 1,003 488 699

84" 1" 982 1,111 538 771

96" 1" 1,079 1,219 588 843

RM3441 12" 1 1⁄4" 447 506 249 407

24" 1 1⁄4" 540 611 301 490

36" 1 1⁄4" 633 714 350 570

48" 1 1⁄4" 725 819 402 652

60" 1 1⁄4" 818 924 451 735

72" 1 1⁄4" 912 1,029 503 816

84" 1 1⁄4" 1,005 1,134 552 897

96" 1 1⁄4" 1,097 1,239 604 979

RM3442 12" 1 1⁄2" 524 591 278 400

24" 1 1⁄2" 612 690 332 475

36" 1 1⁄2" 697 788 387 553

48" 1 1⁄2" 784 887 441 631

60" 1 1⁄2" 872 986 497 710

72" 1 1⁄2" 959 1,083 550 788

84" 1 1⁄2" 1,046 1,183 606 865

96" 1 1⁄2" 1,132 1,279 659 942

Push Bars - Flat Ends (7" Grip)

Part CTC Dia. 3/605 9/611 32/629 32316

RM3202 Up to 36" 1" 561 634 302 432

RM3212 Up to 36" 1 1⁄4" 594 670 316 504

RM3222 Up to 36" 1 1⁄2" 658 744 352 514

Push Bars - Round Ends (7" Grip)RM3206 Up to 36" 1" 664 750 342 490

RM3216 Up to 36" 1 1⁄4" 697 788 355 509

RM3226 Up to 36" 1 1⁄2" 763 861 392 562

RM3441

RM3212

RM3216

RM

32

02

- R

M3

70

2N

EO

MA

X /

LIN

EA

MA

X

LineaMax - Grooved Pulls

Straight Pulls - Solid Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM3701 12" 1 1⁄4" 793 856 546 412 461

24" 1 1⁄4" 952 1,027 671 504 563

36" 1 1⁄4" 1,110 1,198 769 593 665

48" 1 1⁄4" 1,269 1,368 867 685 767

60" 1 1⁄4" 1,427 1,540 965 776 868

72" 1 1⁄4" 1,585 1,711 1,065 866 971

84" 1 1⁄4" 1,743 1,884 1,188 958 1,073

96" 1 1⁄4" 1,902 2,054 1,286 1,050 1,175

RM3702 12" 1 1⁄2" 955 1,031 594 455 511

24" 1 1⁄2" 1,126 1,217 727 555 622

36" 1 1⁄2" 1,299 1,402 835 654 732

48" 1 1⁄2" 1,469 1,588 942 754 845

60" 1 1⁄2" 1,643 1,773 1,049 853 956

72" 1 1⁄2" 1,814 1,959 1,182 953 1,067

84" 1 1⁄2" 1,984 2,145 1,288 1,052 1,177

96" 1 1⁄2" 2,157 2,329 1,395 1,151 1,289

• Add $8.10/in. over 96".

• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).

RM3701

Page 26: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.26

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

37

11

- R

M3

73

2LI

NE

AM

AX

LineaMax - Grooved Pulls (con't)

Offset Pulls - Solid Flat Ends

PartMax OA Dia.

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629

RM3711 12" 1 1⁄4" 840 905 592 453 509

24" 1 1⁄4" 997 1,078 716 544 611

36" 1 1⁄4" 1,156 1,248 815 636 713

48" 1 1⁄4" 1,314 1,419 912 726 814

60" 1 1⁄4" 1,472 1,590 1,010 819 915

72" 1 1⁄4" 1,630 1,762 1,109 908 1,017

84" 1 1⁄4" 1,789 1,932 1,233 999 1,120

96" 1 1⁄4" 1,947 2,104 1,331 1,091 1,222

RM3712 12" 1 1⁄2" 1,001 1,081 665 499 557

24" 1 1⁄2" 1,172 1,267 773 596 668

36" 1 1⁄2" 1,345 1,453 879 695 779

48" 1 1⁄2" 1,516 1,637 986 795 890

60" 1 1⁄2" 1,689 1,822 1,094 893 1,001

72" 1 1⁄2" 1,859 2,008 1,225 993 1,112

84" 1 1⁄2" 2,031 2,194 1,334 1,093 1,224

96" 1 1⁄2" 2,204 2,380 1,442 1,193 1,335

Straight Pulls - Fully Grooved Flat Ends

RM3721 12" 1 1⁄4" 569 615 428 303 339

24" 1 1⁄4" 719 776 522 389 435

36" 1 1⁄4" 868 937 641 475 533

48" 1 1⁄4" 1,017 1,098 734 561 628

60" 1 1⁄4" 1,166 1,259 826 647 725

72" 1 1⁄4" 1,315 1,421 920 733 822

84" 1 1⁄4" 1,465 1,582 1,013 821 918

96" 1 1⁄4" 1,614 1,743 1,107 905 1,015

RM3722 12" 1 1⁄2" 620 670 475 345 386

24" 1 1⁄2" 776 840 574 437 489

36" 1 1⁄2" 933 1,007 699 529 592

48" 1 1⁄2" 1,088 1,176 798 621 695

60" 1 1⁄2" 1,243 1,344 898 714 799

72" 1 1⁄2" 1,400 1,512 999 805 902

84" 1 1⁄2" 1,555 1,681 1,097 898 1,005

96" 1 1⁄2" 1,711 1,849 1,222 990 1,108

Offset Pulls - Fully Grooved Flat Ends

RM3731 12" 1 1⁄4" 616 664 474 344 385

24" 1 1⁄4" 765 826 567 430 481

36" 1 1⁄4" 915 988 685 516 578

48" 1 1⁄4" 1,064 1,148 778 604 675

60" 1 1⁄4" 1,213 1,309 872 689 771

72" 1 1⁄4" 1,362 1,471 964 775 867

84" 1 1⁄4" 1,512 1,631 1,057 861 964

96" 1 1⁄4" 1,661 1,792 1,176 948 1,062

RM3732 12" 1 1⁄2" 667 720 519 386 433

24" 1 1⁄2" 823 888 645 478 536

36" 1 1⁄2" 978 1,056 744 570 640

48" 1 1⁄2" 1,134 1,225 843 662 743

60" 1 1⁄2" 1,290 1,393 943 755 846

72" 1 1⁄2" 1,447 1,562 1,043 848 949

84" 1 1⁄2" 1,603 1,730 1,142 939 1,052

96" 1 1⁄2" 1,759 1,898 1,266 1,032 1,156

• Add $8.10/in. over 96".

• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).

RM3711

RM3721

RM3731

Page 27: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 27

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

37

51

- R

M3

77

2LI

NE

AM

AX

LineaMax - Grooved Pulls (con't)

Straight Pulls - Solid Round Ends

PartMax OA Dia.

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629

RM3751 12" 1 1⁄4" 898 970 611 472 528

24" 1 1⁄4" 1,056 1,142 735 562 630

36" 1 1⁄4" 1,216 1,312 834 653 731

48" 1 1⁄4" 1,374 1,483 931 745 833

60" 1 1⁄4" 1,533 1,655 1,030 835 936

72" 1 1⁄4" 1,691 1,826 1,128 927 1,038

84" 1 1⁄4" 1,850 1,998 1,253 1,017 1,140

96" 1 1⁄4" 2,008 2,168 1,350 1,107 1,240

RM3752 12" 1 1⁄2" 1,060 1,146 684 515 577

24" 1 1⁄2" 1,233 1,331 792 615 688

36" 1 1⁄2" 1,403 1,516 898 714 799

48" 1 1⁄2" 1,575 1,701 1,005 813 909

60" 1 1⁄2" 1,747 1,888 1,113 912 1,021

72" 1 1⁄2" 1,919 2,073 1,245 1,011 1,132

84" 1 1⁄2" 2,091 2,259 1,352 1,109 1,242

96" 1 1⁄2" 2,263 2,442 1,460 1,209 1,355

Offset Pulls - Solid Round Ends

RM3761 12" 1 1⁄4" 943 1,019 681 513 574

24" 1 1⁄4" 1,103 1,191 779 605 676

36" 1 1⁄4" 1,261 1,362 878 694 778

48" 1 1⁄4" 1,420 1,534 977 785 880

60" 1 1⁄4" 1,578 1,704 1,074 877 982

72" 1 1⁄4" 1,737 1,876 1,198 967 1,083

84" 1 1⁄4" 1,895 2,047 1,296 1,059 1,186

96" 1 1⁄4" 2,054 2,220 1,394 1,149 1,288

RM3762 12" 1 1⁄2" 1,107 1,196 728 556 623

24" 1 1⁄2" 1,278 1,381 836 655 734

36" 1 1⁄2" 1,450 1,567 943 755 846

48" 1 1⁄2" 1,622 1,752 1,051 854 957

60" 1 1⁄2" 1,795 1,937 1,183 954 1,068

72" 1 1⁄2" 1,965 2,122 1,290 1,053 1,179

84" 1 1⁄2" 2,137 2,308 1,398 1,153 1,290

96" 1 1⁄2" 2,309 2,493 1,504 1,251 1,401

Straight Pulls - Fully Grooved Round Ends

RM3771 12" 1 1⁄4" 674 729 492 361 405

24" 1 1⁄4" 824 890 586 448 502

36" 1 1⁄4" 973 1,050 705 534 598

48" 1 1⁄4" 1,123 1,213 797 620 694

60" 1 1⁄4" 1,272 1,374 890 707 791

72" 1 1⁄4" 1,421 1,535 984 793 888

84" 1 1⁄4" 1,571 1,696 1,076 879 985

96" 1 1⁄4" 1,720 1,857 1,195 965 1,080

RM3772 12" 1 1⁄2" 727 784 539 404 452

24" 1 1⁄2" 882 953 664 497 556

36" 1 1⁄2" 1,038 1,121 763 588 659

48" 1 1⁄2" 1,195 1,289 863 680 761

60" 1 1⁄2" 1,349 1,459 962 773 865

72" 1 1⁄2" 1,505 1,626 1,061 864 968

84" 1 1⁄2" 1,662 1,796 1,187 957 1,071

96" 1 1⁄2" 1,817 1,963 1,286 1,050 1,175

• Add $8.10/in. over 96".

• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).

RM3751

RM3761

RM3771

Page 28: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.28

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

LIN

EA

MA

X

LineaMax - Grooved Pulls (con't)

Offset Pulls - Fully Grooved Round Ends

PartMax OA Dia.

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629

RM3781 12" 1 1⁄4" 722 779 538 403 451

24" 1 1⁄4" 871 939 655 489 547

36" 1 1⁄4" 1,019 1,102 749 575 645

48" 1 1⁄4" 1,168 1,262 842 661 742

60" 1 1⁄4" 1,318 1,424 935 748 837

72" 1 1⁄4" 1,467 1,585 1,028 834 934

84" 1 1⁄4" 1,617 1,746 1,121 921 1,032

96" 1 1⁄4" 1,766 1,907 1,240 1,006 1,127

RM3782 12" 1 1⁄2" 773 835 583 446 500

24" 1 1⁄2" 929 1,003 708 538 602

36" 1 1⁄2" 1,084 1,171 809 630 706

48" 1 1⁄2" 1,240 1,340 907 722 808

60" 1 1⁄2" 1,396 1,508 1,006 814 912

72" 1 1⁄2" 1,552 1,675 1,107 905 1,015

84" 1 1⁄2" 1,708 1,845 1,232 998 1,118

96" 1 1⁄2" 1,862 2,012 1,331 1,091 1,222

Straight Pulls - Fully Grooved Bent Ends

RM3741 12" 1 1⁄4" 338 379

24" 1 1⁄4" 424 475

36" 1 1⁄4" 511 571

48" 1 1⁄4" 596 668

60" 1 1⁄4" 682 765

72" 1 1⁄4" 769 861

84" 1 1⁄4" 855 958

96" 1 1⁄4" 941 1,055

RM3742 12" 1 1⁄2" 381 426

24" 1 1⁄2" 473 529

36" 1 1⁄2" 564 633

48" 1 1⁄2" 657 735

60" 1 1⁄2" 749 838

72" 1 1⁄2" 840 942

84" 1 1⁄2" 934 1,045

96" 1 1⁄2" 1,025 1,148

Push Bars Solid Grooves Flat Ends

RM3512 Up to 36" CTC 1 1⁄4" 1,110 1,198 769 593 665

RM3522 Up to 36" CTC 1 1⁄2" 1,299 1,402 835 654 732

Push Bars Solid Grooves Round Ends

RM3516 Up to 36" CTC 1 1⁄4" 1,216 1,312 834 653 731

RM3526 Up to 36" CTC 1 1⁄2" 1,403 1,516 898 714 799

Push Bars Fully Grooved - Flat Ends

RM3612 Up to 36" CTC 1 1⁄4" 868 937 641 475 533

RM3622 Up to 36" CTC 1 1⁄2" 933 1,007 699 529 592

Push Bars Fully Grooved - Round Ends

RM3616 Up to 36" CTC 1 1⁄4" 973 1,050 705 534 598

RM3626 Up to 36" CTC 1 1⁄2" 1,038 1,121 763 588 659

• Add $8.10/in. over 96".

• MP (Mid Post) - Add $68 each (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines).

RM3781

RM3741

RM3512

RM3516

RM3612

RM3616

RM

35

12

- R

M3

78

2

Page 29: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 29

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

38

00

- R

M3

85

0N

OIR

ME

T

NoirMet - Black Anodized Grip with Contrasting Ends and Posts

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM3800 12" 1" 396 458 395 279 308 408 448

24" 1" 432 492 423 307 338 447 491

36" 1" 447 507 440 323 355 470 516

48" 1" 666 727 543 422 466 615 677

60" 1" 724 773 568 447 491 650 716

72" 1" 779 819 591 470 516 683 753

84" 1" 890 940 650 500 550 729 800

96" 1" 1,001 1,062 681 530 583 772 849

RM3810 12" 1 1⁄4" 418 476 403 288 315 420 461

24" 1 1⁄4" 476 514 440 323 355 470 516

36" 1 1⁄4" 495 535 457 339 372 492 542

48" 1 1⁄4" 667 727 562 441 484 641 705

60" 1 1⁄4" 704 755 580 457 504 667 734

72" 1 1⁄4" 741 781 599 476 523 692 760

84" 1 1⁄4" 881 920 684 533 587 775 854

96" 1 1⁄4" 1,022 1,057 742 589 648 858 941

RM3820 12" 1 1⁄2" 517 555 457 339 372 492 542

24" 1 1⁄2" 576 614 485 367 403 534 587

36" 1 1⁄2" 624 664 524 405 445 589 648

48" 1 1⁄2" 710 729 600 477 524 693 762

60" 1 1⁄2" 775 797 662 512 563 744 819

72" 1 1⁄2" 841 862 697 546 600 794 873

84" 1 1⁄2" 962 985 756 603 663 878 965

96" 1 1⁄2" 1,084 1,105 817 660 726 960 1,057

Offset Pulls - Flat EndsRM3830 12" 1" 447 555 440 323 355 470 516

24" 1" 530 630 490 372 411 542 596

36" 1" 625 711 543 422 466 615 677

48" 1" 720 795 594 473 521 688 758

60" 1" 778 842 621 496 547 722 795

72" 1" 834 887 670 520 571 756 832

84" 1" 947 1,009 716 563 620 819 901

96" 1" 1,055 1,129 760 605 666 881 968

RM3840 12" 1 1⁄4" 466 576 447 331 364 480 528

24" 1 1⁄4" 561 644 499 380 418 553 607

36" 1 1⁄4" 641 720 551 430 472 625 686

48" 1 1⁄4" 722 795 601 478 525 695 763

60" 1 1⁄4" 759 823 620 495 546 721 794

72" 1 1⁄4" 795 849 663 513 564 746 820

84" 1 1⁄4" 935 989 722 570 628 831 915

96" 1 1⁄4" 1,076 1,126 781 626 689 912 1,003

RM3850 12" 1 1⁄2" 565 655 501 382 421 557 614

24" 1 1⁄2" 624 711 524 405 445 589 648

36" 1 1⁄2" 695 756 582 459 508 669 739

48" 1 1⁄2" 765 798 664 514 565 748 823

60" 1 1⁄2" 831 864 701 549 604 799 879

72" 1 1⁄2" 895 931 737 583 642 849 935

84" 1 1⁄2" 1,017 1,050 796 641 705 933 1,025

96" 1 1⁄2" 1,140 1,172 856 698 767 1,015 1,117

RM3810

RM3840

Page 30: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.30

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

38

02

- R

M3

85

4

NO

IRM

ET

NoirMet - Black Anodized Grip with Contrasting Ends and Posts (con't)

Straight Pulls - Round Ends

PartMax OA Dia.

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629 32D316 32316

RM3804 12" 1" 447 507 440 323 355 470 516 24" 1" 481 542 470 352 387 514 565 36" 1" 495 555 485 367 403 534 587 48" 1" 717 775 594 473 521 688 758 60" 1" 772 823 621 496 547 722 795 72" 1" 826 866 671 521 572 758 833 84" 1" 937 988 717 564 621 820 902 96" 1" 1,046 1,107 761 607 668 883 972

RM3814 12" 1 1⁄4" 466 527 447 331 364 480 528 24" 1 1⁄4" 528 566 484 366 402 531 585 36" 1 1⁄4" 547 584 501 382 421 557 614 48" 1 1⁄4" 718 778 604 480 527 699 770 60" 1 1⁄4" 755 803 623 497 548 723 797 72" 1 1⁄4" 789 828 667 515 567 752 824 84" 1 1⁄4" 929 969 726 572 631 833 917 96" 1 1⁄4" 1,068 1,108 784 630 691 916 1,006

RM3824 12" 1 1⁄2" 565 605 501 382 421 557 614 24" 1 1⁄2" 624 664 524 405 445 589 648 36" 1 1⁄2" 672 711 570 449 493 654 720 48" 1 1⁄2" 759 780 667 515 567 752 824 60" 1 1⁄2" 824 846 702 550 605 800 881 72" 1 1⁄2" 888 911 738 584 643 850 936 84" 1 1⁄2" 1,009 1,030 795 639 703 930 1,024 96" 1 1⁄2" 1,129 1,149 852 694 764 1,011 1,112

Offset Pulls - Round EndsRM3834 12" 1" 495 535 485 367 403 534 587

24" 1" 581 626 536 415 456 605 666 36" 1" 676 731 586 462 510 673 741 48" 1" 771 832 660 511 561 742 818 60" 1" 826 893 685 534 588 778 856 72" 1" 881 952 709 558 614 812 894 84" 1" 992 1,071 755 602 661 876 964 96" 1" 1,101 1,188 799 644 722 938 1,049

RM3844 12" 1 1⁄4" 517 558 490 372 418 542 607 24" 1 1⁄4" 611 658 542 421 472 614 686 36" 1 1⁄4" 691 747 592 471 526 685 766 48" 1 1⁄4" 772 834 669 519 580 754 844 60" 1 1⁄4" 809 873 686 535 599 779 872 72" 1 1⁄4" 844 913 705 553 620 805 901 84" 1 1⁄4" 985 1,063 764 611 684 888 996 96" 1 1⁄4" 1,123 1,213 822 667 747 971 1,087

RM3854 12" 1 1⁄2" 614 663 544 423 476 617 692 24" 1 1⁄2" 672 726 570 449 503 654 732 36" 1 1⁄2" 743 803 651 502 561 730 818 48" 1 1⁄2" 812 879 705 553 620 805 901 60" 1 1⁄2" 879 950 741 588 658 856 958 72" 1 1⁄2" 942 1,018 776 622 697 904 1,014 84" 1 1⁄2" 1,064 1,148 835 678 759 987 1,105 96" 1 1⁄2" 1,184 1,277 893 734 822 1,067 1,196

Push Bars - Flat EndsRM3802 Up to 36" CTC 1" 447 507 440 323 355 470 516 RM3812 Up to 36" CTC 1 1⁄4" 495 535 457 339 372 492 542 RM3822 Up to 36" CTC 1 1⁄2" 624 664 524 405 445 589 648

Push Bars - Round EndsRM3806 Up to 36" CTC 1" 495 555 485 367 403 534 587 RM3816 Up to 36" CTC 1 1⁄4" 547 584 501 382 421 557 614 RM3826 Up to 36" CTC 1 1⁄2" 672 711 570 449 493 654 720

• Add $6.50/in. over 36" for push bars.

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM3814

RM3844

RM3812

RM3816

Page 31: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 31

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

39

00

- R

M3

95

0N

OIR

TE

K

NoirTek - Black Anodized Grip with Contrasting Posts

• Add $6.50/in. over 96".

• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under

RM3900-RM3920.

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end

for flush and wide stile doors.

Straight Pulls - Flat Ends

PartMax OA Dia. 28/628

313/710 315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629

RM3900 12" 1" 196 216 261 281 258 186 210

24" 1" 277 304 297 319 286 213 238

36" 1" 359 394 312 336 302 230 256

48" 1" 441 485 529 572 446 330 369

60" 1" 523 575 586 633 470 352 396

72" 1" 605 664 642 693 495 376 420

84" 1" 685 753 755 815 527 407 455

RM3910 12" 1 1⁄4" 215 236 281 303 266 194 217

24" 1 1⁄4" 301 332 341 369 302 230 256

36" 1 1⁄4" 389 427 358 388 320 246 274

48" 1 1⁄4" 476 514 530 573 464 346 387

60" 1 1⁄4" 562 592 567 613 483 365 408

72" 1 1⁄4" 649 672 604 653 500 381 426

84" 1 1⁄4" 737 748 744 805 560 439 491

RM3920 12" 1 1⁄2" 255 280 381 411 320 246 274

24" 1 1⁄2" 325 358 438 474 387 273 306

36" 1 1⁄2" 396 436 489 528 427 311 348

48" 1 1⁄2" 468 524 575 620 501 382 428

60" 1 1⁄2" 539 618 640 691 539 418 468

72" 1 1⁄2" 610 714 704 761 574 452 507

84" 1 1⁄2" 680 810 826 893 659 510 570

Offset Pulls - Flat Ends

RM3930 12" 1" 307 334 303 231 258

24" 1" 343 372 371 256 287

36" 1" 358 388 387 273 306

48" 1" 577 622 490 372 417

60" 1" 634 686 517 398 444

72" 1" 690 745 540 419 470

84" 1" 802 865 571 450 505

RM3940 12" 1 1⁄4" 330 355 312 237 267

24" 1 1⁄4" 389 420 387 273 306

36" 1 1⁄4" 407 438 404 289 324

48" 1 1⁄4" 579 624 509 389 438

60" 1 1⁄4" 615 664 529 408 456

72" 1 1⁄4" 652 704 545 424 477

84" 1 1⁄4" 793 855 606 483 541

RM3950 12" 1 1⁄2" 428 463 404 289 324

24" 1 1⁄2" 488 526 433 315 353

36" 1 1⁄2" 536 579 474 355 399

48" 1 1⁄2" 621 671 546 425 478

60" 1 1⁄2" 688 742 583 460 517

72" 1 1⁄2" 750 811 620 495 554

84" 1 1⁄2" 875 943 705 553 620

RM3910

RM3940

Page 32: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.32

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

39

02

- R

M3

95

4N

OIR

TE

K

NoirTek - Black Anodized Grip with Contrasting Posts (con't)

• Add $6.50/in. over 36" for push bars.

• Add $6.50/in. over 96".

• HF (Hands-Free) Post - Add $28 each (Available on straight post only.) Order form available on website under

RM3904-RM3924.

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

Straight Pulls - Round Ends

PartMax OA Dia. 28/628

313/710 315/711

3/6054/606

10/612 10B/613

Stock PC 10BE 32D/630 32/629

RM3904 12" 1" 242 267 370 399 311 236 265

24" 1" 321 353 406 437 377 263 295

36" 1" 397 438 420 454 394 278 312

48" 1" 476 524 638 690 498 379 424

60" 1" 554 609 695 750 522 403 451

72" 1" 630 693 750 811 545 424 477

84" 1" 709 779 863 933 579 456 512

RM3914 12" 1 1⁄4" 261 288 390 422 319 244 273

24" 1 1⁄4" 337 371 451 487 394 278 312

36" 1 1⁄4" 414 455 467 505 412 296 331

48" 1 1⁄4" 491 540 640 691 517 398 444

60" 1 1⁄4" 566 623 676 730 534 414 462

72" 1 1⁄4" 644 708 712 771 553 433 484

84" 1 1⁄4" 719 792 854 922 612 489 548

RM3924 12" 1 1⁄2" 301 332 490 529 412 296 331

24" 1 1⁄2" 385 423 548 593 440 323 362

36" 1 1⁄2" 468 514 597 644 480 362 405

48" 1 1⁄2" 552 607 683 738 554 434 485

60" 1 1⁄2" 632 697 748 809 590 468 524

72" 1 1⁄2" 716 788 812 878 651 502 562

84" 1 1⁄2" 800 880 935 1,010 710 559 626

Offset Pulls - Round EndsRM3934 12" 1" 418 451 395 279 313

24" 1" 453 489 423 307 343

36" 1" 467 505 440 323 362

48" 1" 687 741 543 422 474

60" 1" 743 803 568 447 500

72" 1" 799 863 591 470 525

84" 1" 912 985 650 500 560

RM3944 12" 1 1⁄4" 437 472 403 288 323

24" 1 1⁄4" 498 537 440 323 362

36" 1 1⁄4" 514 557 457 339 380

48" 1 1⁄4" 688 742 562 441 493

60" 1 1⁄4" 725 782 580 457 513

72" 1 1⁄4" 762 822 599 476 531

84" 1 1⁄4" 901 973 684 533 597

RM3954 12" 1 1⁄2" 537 580 457 339 380

24" 1 1⁄2" 596 643 485 367 411

36" 1 1⁄2" 644 696 524 405 454

48" 1 1⁄2" 731 789 600 477 534

60" 1 1⁄2" 797 860 662 512 574

72" 1 1⁄2" 861 930 697 546 611

84" 1 1⁄2" 985 1,063 756 603 676

Push Bars - Flat EndsRM3902 Up to 36" CTC 1" 359 394 312 336 302 230 256

RM3912 Up to 36" CTC 1 1⁄4" 389 427 358 388 320 246 274

RM3922 Up to 36" CTC 1 1⁄2" 396 436 489 528 427 311 348

Push Bars - Round EndsRM3906 Up to 36" CTC 1" 397 438 420 454 394 278 312

RM3916 Up to 36" CTC 1 1⁄4" 414 455 467 505 412 296 331

RM3926 Up to 36" CTC 1 1⁄2" 468 514 597 644 480 362 405

RM3914

RM3944

RM3912

RM3916

Page 33: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 33

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

40

00

- R

M4

05

0A

RB

OR

ME

T

ArborMet - Wood Grip Pulls

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4000 12" 1" 512 553 504 372 417

24" 1" 579 624 568 432 482

36" 1" 644 695 656 490 548

48" 1" 710 767 721 550 616

RM4010 12" 1 1⁄4" 535 578 519 386 433

24" 1 1⁄4" 601 650 583 446 500

36" 1 1⁄4" 667 720 672 505 564

48" 1 1⁄4" 732 792 737 563 631

RM4020 12" 1 1⁄2" 623 673 581 443 497

24" 1 1⁄2" 690 744 670 503 562

36" 1 1⁄2" 756 816 734 561 628

48" 1 1⁄2" 822 887 797 620 694

Offset Pulls - Flat Ends

RM4030 12" 1" 559 603 548 413 462

24" 1" 624 674 637 473 529

36" 1" 691 746 701 531 595

48" 1" 757 817 765 590 661

RM4040 12" 1 1⁄4" 581 626 564 427 479

24" 1 1⁄4" 648 699 653 487 545

36" 1 1⁄4" 712 771 718 545 612

48" 1 1⁄4" 779 842 780 606 677

RM4050 12" 1 1⁄2" 670 724 651 484 542

24" 1 1⁄2" 736 795 715 543 609

36" 1 1⁄2" 802 865 778 604 675

48" 1 1⁄2" 868 937 842 661 742

Straight Pulls - Round Ends

RM4004 12" 1" 618 668 555 420 470

24" 1" 685 738 645 478 536

36" 1" 749 810 708 538 602

48" 1" 816 882 773 596 668

RM4014 12" 1 1⁄4" 641 692 570 434 485

24" 1 1⁄4" 707 763 659 492 552

36" 1 1⁄4" 773 835 723 552 618

48" 1 1⁄4" 840 905 788 611 684

RM4024 12" 1 1⁄2" 729 787 656 490 548

24" 1 1⁄2" 795 859 721 550 616

36" 1 1⁄2" 861 931 784 609 681

48" 1 1⁄2" 928 1001 848 667 748

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end

for flush and wide stile doors.

RM4010

RM4040

RM4014

Page 34: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.34

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

40

02

- R

M4

05

4A

RB

OR

ME

T

ArborMet - Wood Grip Pulls (con't)

Offset Pulls - Round Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4034 12" 1" 664 718 600 460 516

24" 1" 730 789 690 519 582

36" 1" 797 860 753 579 648

48" 1" 862 932 817 639 715

RM4044 12" 1 1⁄4" 687 742 641 475 533

24" 1 1⁄4" 754 813 705 534 598

36" 1 1⁄4" 819 884 768 592 664

48" 1 1⁄4" 885 956 833 652 730

RM4054 12" 1 1⁄2" 775 838 701 531 595

24" 1 1⁄2" 842 909 765 590 661

36" 1 1⁄2" 907 979 831 649 728

48" 1 1⁄2" 973 1050 893 709 794

Push Bars - Flat Ends

RM4002 Up to 36" CTC 1" 644 695 656 490 548

RM4012 Up to 36" CTC 1 1⁄4" 667 720 672 505 564

RM4022 Up to 36" CTC 1 1⁄2" 756 816 734 561 628

Push Bars - Round Ends

RM4006 Up to 36" CTC 1" 749 810 708 538 602

RM4016 Up to 36" CTC 1 1⁄4" 773 835 723 552 618

RM4026 Up to 36" CTC 1 1⁄2" 861 931 784 609 681

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM4044

RM4012

RM4016

Page 35: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 35

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

40

00

MP

- R

M4

05

4M

PA

RB

OR

ME

T

ArborMet - Wood Grip Pulls (con't)

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4000MP 60" 1" 826 893 838 658 737

72" 1" 893 964 903 718 803

84" 1" 958 1,035 966 777 869

96" 1" 1,025 1,107 1,031 836 937

RM4010MP 60" 1 1⁄4" 848 917 854 672 752

72" 1 1⁄4" 915 989 917 731 820

84" 1 1⁄4" 979 1,059 982 791 885

96" 1 1⁄4" 1,046 1,130 1,046 851 953

RM4020MP 60" 1 1⁄2" 937 1,012 914 728 816

72" 1 1⁄2" 1,004 1,083 979 787 883

84" 1 1⁄2" 1,070 1,155 1,043 848 949

96" 1 1⁄2" 1,135 1,225 1,107 906 1,016

Offset Pulls - Flat EndsRM4030MP 60" 1" 873 941 883 698 782

72" 1" 938 1,013 947 758 850

84" 1" 1,005 1,084 1,010 819 916

96" 1" 1,071 1,156 1,075 878 983

RM4040MP 60" 1 1⁄4" 895 967 897 714 798

72" 1 1⁄4" 960 1,038 962 773 865

84" 1 1⁄4" 1,027 1,109 1,026 832 932

96" 1 1⁄4" 1,092 1,181 1,091 891 998

RM4050MP 60" 1 1⁄2" 985 1,063 960 769 862

72" 1 1⁄2" 1,049 1,132 1,024 829 929

84" 1 1⁄2" 1,116 1,204 1,089 888 995

96" 1 1⁄2" 1,182 1,275 1,152 948 1,063

Straight Pulls - Round EndsRM4004MP 60" 1" 932 1,007 889 705 789

72" 1" 997 1,078 953 764 856

84" 1" 1,064 1,149 1,019 824 923

96" 1" 1,129 1,220 1,082 883 989

RM4014MP 60" 1 1⁄4" 955 1,031 905 719 804

72" 1 1⁄4" 1,020 1,102 968 778 872

84" 1 1⁄4" 1,087 1,173 1,033 837 938

96" 1 1⁄4" 1,153 1,243 1,097 896 1,005

RM4024MP 60" 1 1⁄2" 1,043 1,126 965 776 868

72" 1 1⁄2" 1,109 1,198 1,030 835 935

84" 1 1⁄2" 1,174 1,269 1,094 894 1,001

96" 1 1⁄2" 1,240 1,341 1,158 955 1,069

Offset Pulls - Round EndsRM4034MP 60" 1" 977 1,056 933 747 835

72" 1" 1,044 1,127 999 805 902

84" 1" 1,110 1,199 1,062 914 1,023

96" 1" 1,176 1,271 1,127 1,022 1,145

RM4044MP 60" 1 1⁄4" 1,001 1,081 949 760 851

72" 1 1⁄4" 1,067 1,152 1,013 821 918

84" 1 1⁄4" 1,132 1,223 1,077 880 985

96" 1 1⁄4" 1,199 1,294 1,142 939 1,052

RM4054MP 60" 1 1⁄2" 1,089 1,176 1,009 818 915

72" 1 1⁄2" 1,155 1,248 1,074 877 982

84" 1 1⁄2" 1,221 1,319 1,138 936 1,049

96" 1 1⁄2" 1,287 1,390 1,202 995 1,114

RM4010MP

RM4040MP

RM4044MP

RM4014MP

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end

for flush and wide stile doors.

Page 36: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.36

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

41

00

- R

M4

15

0A

RB

OR

TEK

ArborTek - Wood Grip Pulls

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4100 12" 1" 381 411 376 253 285

24" 1" 447 483 441 313 350

36" 1" 512 553 504 372 417

48" 1" 579 624 568 432 482

RM4110 12" 1 1⁄4" 402 435 403 279 313

24" 1 1⁄4" 469 507 467 338 379

36" 1 1⁄4" 535 578 531 398 445

48" 1 1⁄4" 601 650 594 455 511

RM4120 12" 1 1⁄2" 492 531 453 324 364

24" 1 1⁄2" 558 602 517 384 430

36" 1 1⁄2" 623 673 581 443 497

48" 1 1⁄2" 690 744 670 503 562

Offset Pulls - Flat Ends

RM4130 12" 1" 427 461 421 296 331

24" 1" 493 532 485 354 398

36" 1" 559 603 548 413 462

48" 1" 624 674 637 473 529

RM4140 12" 1 1⁄4" 449 485 447 320 357

24" 1 1⁄4" 514 557 512 379 425

36" 1 1⁄4" 581 626 575 438 491

48" 1 1⁄4" 648 699 665 499 557

RM4150 12" 1 1⁄2" 537 581 498 366 410

24" 1 1⁄2" 604 652 561 425 476

36" 1 1⁄2" 670 724 651 484 542

48" 1 1⁄2" 736 795 715 543 609

Straight Pulls - Round Ends

RM4104 12" 1" 487 526 427 301 338

24" 1" 551 596 490 359 404

36" 1" 618 668 555 420 470

48" 1" 685 738 645 478 536

RM4114 12" 1 1⁄4" 508 549 454 325 365

24" 1 1⁄4" 575 620 518 385 432

36" 1 1⁄4" 641 692 582 445 499

48" 1 1⁄4" 707 763 671 504 563

RM4124 12" 1 1⁄2" 597 644 504 372 417

24" 1 1⁄2" 663 717 568 432 482

36" 1 1⁄2" 729 787 656 490 548

48" 1 1⁄2" 795 859 721 550 616

RM4110

RM4140

RM4114

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

Page 37: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 37

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

ArborTek - Wood Grip Pulls (con't)

Offset Pulls - Round Ends

Part OA Dia.3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4134 12" 1" 532 576 471 343 384

24" 1" 599 647 537 402 450

36" 1" 664 718 600 460 516

48" 1" 730 789 690 519 582

RM4144 12" 1 1⁄4" 554 600 499 368 411

24" 1 1⁄4" 620 670 562 426 477

36" 1 1⁄4" 687 742 652 485 544

48" 1 1⁄4" 754 813 716 544 611

RM4154 12" 1 1⁄2" 643 694 548 413 462

24" 1 1⁄2" 709 766 637 473 529

36" 1 1⁄2" 775 838 701 531 595

48" 1 1⁄2" 842 909 765 590 661

Push Bars - Flat Ends

RM4112 Up to 36" CTC 1 1⁄4" 535 578 531 398 445

RM4122 Up to 36" CTC 1 1⁄2" 623 673 581 443 497

Push Bars - Round Ends

RM4116 Up to 36" CTC 1 1⁄4" 641 692 582 445 499

RM4126 Up to 36" CTC 1 1⁄2" 729 787 656 490 548

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4100MP 60" 1" 694 749 685 540 605

72" 1" 761 820 749 599 671

84" 1" 826 893 814 659 739

96" 1" 893 964 878 719 803

RM4110MP 60" 1 1⁄4" 717 774 711 563 632

72" 1 1⁄4" 782 845 776 623 698

84" 1 1⁄4" 848 917 840 682 765

96" 1 1⁄4" 915 988 905 743 832

RM4120MP 60" 1 1⁄2" 806 869 786 611 684

72" 1 1⁄2" 872 940 851 670 750

84" 1 1⁄2" 937 1,012 915 729 818

96" 1 1⁄2" 1,004 1,083 980 788 883

RM

41

00

MP

- R

M4

15

4A

RB

OR

TEK

RM4144

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end

for flush and wide stile doors.

RM4110MP

RM4112

RM4116

Page 38: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.38

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

AR

BO

RT

EKR

M4

10

4M

P -

RM

41

54

MP

ArborTek - Wood Grip Pulls (con't)

Offset Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4130MP 60" 1" 741 800 755 581 650

72" 1" 807 872 819 641 718

84" 1" 873 941 884 699 783

96" 1" 938 1,013 948 759 851

RM4140MP 60" 1 1⁄4" 763 1,055 781 607 678

72" 1 1⁄4" 828 896 846 665 745

84" 1 1⁄4" 895 967 910 725 812

96" 1 1⁄4" 960 1,038 975 784 879

RM4150MP 60" 1 1⁄2" 851 920 832 651 729

72" 1 1⁄2" 918 991 895 712 796

84" 1 1⁄2" 985 1,063 960 770 863

96" 1 1⁄2" 1,049 1,132 1,024 830 930

Straight Pulls - Round Ends

RM4104MP 60" 1" 800 863 761 586 657

72" 1" 865 935 824 646 724

84" 1" 932 1,007 889 706 789

96" 1" 997 1,078 953 765 857

RM4114MP 60" 1 1⁄4" 823 887 788 612 685

72" 1 1⁄4" 888 959 852 671 752

84" 1 1⁄4" 955 1,031 916 730 819

96" 1 1⁄4" 1,020 1,102 981 789 885

RM4124MP 60" 1 1⁄2" 912 985 838 658 737

72" 1 1⁄2" 976 1,055 903 718 802

84" 1 1⁄2" 1,043 1,126 966 777 869

96" 1 1⁄2" 1,109 1,198 1,031 836 936

Offset Pulls - Round Ends

RM4134MP 60" 1" 846 915 807 627 703

72" 1" 913 986 870 687 770

84" 1" 977 1,056 935 747 836

96" 1" 1,044 1,127 1,000 805 903

RM4144MP 60" 1 1⁄4" 869 938 833 652 731

72" 1 1⁄4" 935 1,009 896 713 797

84" 1 1⁄4" 1,001 1,081 961 771 864

96" 1 1⁄4" 1,067 1,152 1,025 831 932

RM4154MP 60" 1 1⁄2" 957 1,034 883 698 782

72" 1 1⁄2" 1,024 1,106 947 758 850

84" 1 1⁄2" 1,089 1,176 1,010 819 916

96" 1 1⁄2" 1,155 1,248 1,075 878 983

RM4144MP

RM4114MP

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing. See page 39.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM4140MP

Page 39: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 39

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

Wood Pulls with Collar Mount PostsStraight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4160 12" 1" 559 604 579 440 493

24" 1" 647 697 663 518 581

36" 1" 731 789 746 595 666

48" 1" 822 887 833 676 757

RM4170 12" 1 1⁄4" 568 614 587 449 504

24" 1 1⁄4" 672 727 687 542 608

36" 1 1⁄4" 775 838 788 634 711

48" 1 1⁄4" 849 917 859 699 784

Offset Pulls - Flat Ends RM4180 12" 1" 619 670 636 494 554

24" 1" 714 771 728 580 649

36" 1" 810 876 820 665 746

48" 1" 876 943 884 723 809

RM4190 12" 1 1⁄4" 625 676 644 502 561

24" 1 1⁄4" 738 798 752 602 673

36" 1 1⁄4" 850 919 860 701 785

48" 1 1⁄4" 895 966 903 742 829

RM4170

RM4190

RM

41

60

- R

M4

27

4A

RB

OR

TE

K /

SK

EW

TE

K

ArborTek - Wood Grip Pulls (con't)

SkewTek - Angled End PullsStraight Pull - Forward Segment

PartMax OA Dia. 28/628

313/710 315/711

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM4200-11 16" 1 1⁄2" 543 597 719 775 606 484 543

Offset Pulls - Forward SegmentRM4210LH-11 16" 1 1⁄2" 582 641 764 824 669 521 584

RM4210RH-11 16" 1 1⁄2" 582 641 764 824 669 521 584

Straight Pulls - Rectangular PostsRM4270-12 18" 2" 775 829 1,197 1,293 920 762 854

RM4270-24 30" 2" 848 905 1,308 1,412 1,010 851 952

Offset Pulls - Rectangular PostsRM4272-12 18" 2" 957 1,014 1,382 1,494 1,072 908 1,017

RM4272-24 30" 2" 1,033 1,087 1,491 1,610 1,190 998 1,115

Straight Pulls - Round PostsRM4274-12 18" 2" 775 829 1,197 1,293 920 762 854

RM4274-24 30" 2" 848 905 1,308 1,412 1,010 851 952

• Add $6.50/in. over 30".

RM4200

RM4272

RM4210LH

Wood Add OnWood Species Wood Dia Add OnPremium 1" 24

1 1⁄4" 40

1 1⁄2" 60

Wood Species Wood Dia Add OnSuper Premium 1" 60

1 1⁄4" 80

1 1⁄2" 100

• Add on will apply for Premium and Super Premium wood species, as well as any additional wood finishing.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

Wood SpeciesDomestic (Standard) Hickory, White Oak, Red Oak, Maple

Premium Beech, Cherry, Birch

Super Premium Mahogany, Jatoba (Brazillian Cherry), Canary, Walnut

• Wood is a natural material, colors and grain will vary between pulls.

• Other wood species are available by request.

•  Hickory, sanded unfinished is the stock species; other wood types will require longer lead times and may be

subject to availability,

NOTE: *Add on charges are per wood dowel.

Finish Add OnClear 200*

Dyed 200*

Tung Oil 65*

Page 40: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.40

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

44

00

- R

M4

51

6C

EN

TR

EX

CenTrex - Shaped Pulls

Curved Pulls

Part CTC 28/628313/710 315/711

3/6054/606

10/612 10B/613

Stock PC 10BE

26/625 26D/626 32D/630 32/629

RM4400-12 12" 407 428 625 677 517 625 385 431

RM4400-20 20" 424 446 694 749 533 694 401 449

Double Curved Pulls

RM4402LH 12" 487 508 694 749 571 694 435 488

RM4402RH 12" 487 508 694 749 571 694 435 488

Straight Radius Pulls

RM4410-12 12" 360 381 625 677 460 625 331 371

RM4410-18 18" 381 404 694 749 480 694 349 392

RM4410-24 24" 404 424 759 818 517 759 385 431

Offset Radius Pulls

RM4412-12 12" 446 466 717 773 533 717 401 449

RM4412-18 18" 466 487 778 841 554 778 419 471

RM4412-24 24" 487 508 844 912 590 844 453 508

Semi-Circular Pulls

RM4420 9" 277 298 563 386 522 263 294

RM4422 12" 298 320 584 405 542 283 315

Radius Push Bars

RM4440LH Up to 36" 529 552 953 1029 786 953 612 684

RM4440RH Up to 36" 529 552 953 1029 786 953 612 684

Compound Radius Push Bars

RM4450LH Up to 36" 1,054 1,119 699 1,472 1,185 1,363 958 1,073

RM4450RH Up to 36" 1,054 1,119 699 1,472 1,185 1,363 958 1,073

Semi-Circular Pulls

RM4500 11" 424 446 866 935 633 470 525

RM4502 11" 424 446 866 935 633 470 525

RM4506 12" 564 611 497 367 410

Side Radius Pull

RM4510 12" 466 508 650 701 571 435 488

Projecting Radius Pull

RM4512 12" 953 1029 728 557 623

Radius Push Bars

RM4516LH Up to 36" 571 613 844 912 671 505 564

RM4516RH Up to 36" 571 613 844 912 671 505 564

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM4516LH

RM4512

RM4510

RM4450LH

RM4440LH

RM4412

RM4410

RM4402

RM4400

RM4500

RM4422

Page 41: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 41

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

AccenTek™ - Solid Pulls with Accents

Cast Pulls

Part Grip CTCStock PC

10BE3/6054/606

10/61210A/722

10B/61310BL/614

15/61915A/620 20A/624

26/62526D/626

RM4720 1 1⁄2" x 1⁄2" x 12 1⁄2" 8" 516 493 534 534 534 534 534

RM4700W 1 1⁄4" x 5⁄8" x 14" 10" 599 575 619 619 619 619 619

RM4700B 1 1⁄4" x 5⁄8" x 14" 10" 599 575 619 619 619 619 619

Solid Groove Pulls

Part Grip CTC 32D/630 32/629

RM4750 1⁄2" x 1 1⁄4" 12" 350 3941⁄2" x 1 1⁄4" 24" 407 4541⁄2" x 1 1⁄4" 36" 461 5171⁄2" x 1 1⁄4" 48" 516 578

RM4755 3⁄4" x 1 1⁄4" 12" 399 4463⁄4" x 1 1⁄4" 24" 453 5083⁄4" x 1 1⁄4" 36" 510 5703⁄4" x 1 1⁄4" 48" 563 631

Formed Pulls with Distinguished Fastener Heads

Part Grip CTCWrought

BlackStock PC

10BEBlackSuede 32D/630

RM4800 3⁄4" Dia 12" 434 434 434 372

16" 434 434 434 372

24" 479 479 479 427

36" 655 655 655 563

RM4810 1 1⁄2" x 1⁄4" 12" 357 357 357 301

16" 357 357 357 301

24" 395 395 395 346

36" 541 541 541 455

RM4820 1 1⁄2" x 3⁄16" 12" 434 434 434 372

16" 434 434 434 372

24" 479 479 479 427

36" 655 655 655 563

RM4800 x RM4810 12" 792 792 792 673

16" 792 792 792 673

24" 875 875 875 773

36" 1,197 1,197 1,197 1,018

RM4820 x RM4810 12" 792 792 792 673

16" 792 792 792 673

24" 875 875 875 773

36" 1,197 1,197 1,197 1,018

RM

47

00

- R

M4

82

0 X

RM

48

10

AC

CE

NT

EK

RM4700B

RM4750

RM4800

RM4820

• RM4700 pulls contain white or black polycarbonate insert.

• RM4750 & RM4755 pulls add $9.70/in. over 48". CTC up to 60".

• RM4800 series, US32D and US10BE come with Socket Head Screws. Other finishes come with Hex Head Screws.

• RM4800 series longer lengths may be offered, call factory for pricing.

• Specify CTC when ordering.

Page 42: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.42

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

52

00

- R

M5

28

0P

LA

NT

EK

PlanTek - Flat Front Pulls

Straight Cast Pulls

Part CTC Grip Size3/6054/606

10/612 10B/613

Stock PC 10BE

26/625 26D/626 32D/630 32/629

RM5200-7 7" 1" 310 333 310 310

RM5200-12 12" 1" 356 385 357 356

RM5202 12" 11⁄4" 449 485 450 449

Offset Cast Pulls

RM5204-8 8" 1" 310 333 310 310

RM5204-12 12" 1" 356 385 357 356

Radius End Pulls

RM5210-10 10" 1⁄2" x 1 1⁄4" 633 684 482 350 394

RM5210-12 12" 1⁄2" x 1 1⁄4" 658 711 500 369 412

RM5220-12 12" 3⁄4" x 1 1⁄2" 845 913 537 402 450

RM5220-18 18" 3⁄4" x 1 1⁄2" 941 1,017 593 454 510

Square End Pulls

RM5230-10 10" 1⁄2" x 1 1⁄4" 586 633 389 265 297

RM5230-12 12" 1⁄2" x 1 1⁄4" 614 663 405 282 314

RM5240-12 12" 3⁄4" x 1 1⁄2" 776 840 425 299 334

RM5240-18 18" 3⁄4" x 1 1⁄2" 868 939 443 316 354

Bent End Pulls

RM5250-10 10" 1⁄2" x 1 1⁄4" 474 511 370 246 276

RM5250-12 12" 1⁄2" x 1 1⁄4" 495 533 389 265 297

RM5260-12 12" 3⁄4" x 1 1⁄2" 633 684 443 316 354

RM5260-18 18" 3⁄4" x 1 1⁄2" 750 811 482 350 394

Radius End Pulls

RM5270-10 10" 1⁄2" x 3⁄4" 463 334 374

RM5270-12 12" 1⁄2" x 3⁄4" 477 347 390

RM5270-16 16" 1⁄2" x 3⁄4" 512 379 425

Straight Cast Pull

RM5280 9" 1⁄2" x 1⁄2" 144 155 144 144

Push Bars - Radius Ends

RM5212 Up to 36" 1⁄2" x 1 1⁄4" 868 939 573 436 489

RM5222 Up to 36" 3⁄4" x 1 1⁄2" 1,313 1,418 790 613 685

Push Bars - Flat Ends

RM5232 Up to 36" 1⁄2" x 1 1⁄4" 868 939 500 369 412

RM5242 Up to 36" 3⁄4" x 1 1⁄2" 1,291 1,396 593 454 510

• Add $9.70/in. over 36".

• RM5200, RM5202, RM5204 CTC can not be modified.

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

RM5200

RM5210

RM5250

RM5270

Page 43: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 43

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

55

00

- R

M5

70

2T

RA

DIT

ION

AL

/ C

LA

SS

IC /

MA

RIT

EK

Traditional - Decorative Pulls & PlatesAdd pull price to plate price to make pull plate combination.

Cast Pulls

Part CTCBasePlate

3/6054/606

10/61210B/613

Stock PC 10BE

15/61915A/620

26/625 26D/626

RM5500 6" no 120 128 118 135 120

RM5502 6 7⁄8" yes 196 210 192 224 215

RM5510 12" no 196 210 192 251 233

RM5512 12 7⁄8" yes 272 296 272 346 312

Cast PullsRM5520 8" no 175 190 173 194 175

RM5522 8" yes 215 231 211 231 215

Cast Pulls

Part Size3/6054/606

10/61210B/613

Stock PC 10BE

15/61915A/620

26/625 26D/626

RM5530 5 1⁄2 " 61 67 61 74 61

RM5532 7 1⁄2" 89 96 89 102 95

RM5534 12" 264 285 261 280 264

Heavy Decorative Plates - .090" ThickRM5590A 3" x 12" 103 113 104 125 114

RM5590B 3 1⁄2" x 15" 114 124 113 133 126

RM5590C 4" x 16" 126 137 125 144 134

Heavy Decorative Plates - .090" ThickRM5592A 3" x 12" 103 113 104 125

RM5592B 3 1⁄2" x 15" 114 124 113 133

RM5592C 4" x 16" 126 137 125 144

Heavy Decorative Plates - .090" ThickRM5594B 3 1⁄2" x 15" 207 224 206 225 215

Rope Border Cast PlatesRM5596A 3" x 12" 126 137 125 133 126

RM5596B 3 1⁄2" x 15" 145 158 144 153 145

Plain Cast Plate - 5⁄16" ThickRM5598B 3 1⁄2" x 15" 166 177 164 172 166

Classic - Finial Door Pulls

MariTek - Tapered Pulls

1" Door Pulls

Part CTC GripBase Plate

3/6054/606

10/612 10B/613

Stock PC 10BE

15/61915A/620

26/625 26D/626

RM5650 10" Plain no 413 447 431 487 456

RM5652 10" Rope no 413 447 431 487 456

RM5654 10" Fluted no 413 447 431 487 456

RM5660 10" Plain yes 462 498 482 536 505

RM5662 10" Rope yes 462 498 482 536 505

RM5664 10" Fluted yes 462 498 482 536 505

1" Offset Door PullRM5670 10" Plain no 466 505 487 517 508

Straight Door Pulls

Part CTC3/605 4/606 10B/613

Stock PC 10BE

14/61815/619

26/625 26D/626

RM5700 6" 305 326 318 313 323

RM5702 12" 323 349 336 332 340

Finial Style Number (example: RM5650-4)

Suffix Finial Style:

1 Plain

2 Urn

3 Berry

4 Pinecone

• To order suffix finial style number.

• Add $6.50/in. for longer pulls up to 36".

1 2 3 4

RM5522

RM5530

RM5590RM5592

RM5596

RM5652-4

RM5700

RM5594

RM5512

Page 44: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.44

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

60

60

- R

M6

07

2E

NG

LIS

H B

RID

LE L

EA

TH

ER

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6060 12" 1" 776 839 718 589 660

24" 1" 1,151 1,243 1,049 887 996

36" 1" 1,526 1,646 1,358 1,188 1,330

48" 1" 1,899 2,050 1,667 1,489 1,669

60" 1" 2,288 2,470 1,978 1,791 2,006

72" 1" 2,675 2,890 2,289 2,092 2,343

84" 1" 2,892 3,123 2,407 2,207 2,471

96" 1" 3,107 3,357 2,526 2,324 2,601

RM6061 12" 1 1⁄4" 866 934 815 682 764

24" 1 1⁄4" 1,409 1,521 1,276 1,108 1,241

36" 1 1⁄4" 1,952 2,107 1,715 1,534 1,718

48" 1 1⁄4" 2,399 2,592 2,097 1,905 2,134

60" 1 1⁄4" 2,847 3,074 2,479 2,278 2,550

72" 1 1⁄4" 2,992 3,231 2,623 2,416 2,706

84" 1 1⁄4" 3,134 3,386 2,766 2,555 2,863

96" 1 1⁄4" 3,279 3,541 2,886 2,672 2,994

RM6062 12" 1 1⁄2" 985 1,064 916 779 874

24" 1 1⁄2" 1,572 1,698 1,414 1,242 1,390

36" 1 1⁄2" 2,157 2,331 1,889 1,704 1,908

48" 1 1⁄2" 2,633 2,843 2,112 1,921 2,151

60" 1 1⁄2" 3,107 3,357 2,335 2,138 2,394

72" 1 1⁄2" 3,280 3,543 2,559 2,355 2,636

84" 1 1⁄2" 3,454 3,730 2,781 2,571 2,879

96" 1 1⁄2" 3,627 3,918 3,004 2,788 3,122

Offset Pulls - Flat EndsRM6070 12" 1" 815 880 753 621 696

24" 1" 1,189 1,283 1,084 921 1,031

36" 1" 1,564 1,688 1,391 1,221 1,368

48" 1" 1,937 2,092 1,701 1,522 1,704

60" 1" 2,327 2,512 2,013 1,824 2,042

72" 1" 2,714 2,931 2,323 2,125 2,380

84" 1" 2,929 3,166 2,440 2,240 2,509

96" 1" 3,146 3,397 2,560 2,356 2,638

RM6071 12" 1 1⁄4" 904 976 848 715 800

24" 1 1⁄4" 1,447 1,563 1,309 1,140 1,277

36" 1 1⁄4" 1,990 2,149 1,748 1,567 1,754

48" 1 1⁄4" 2,438 2,632 2,130 1,938 2,172

60" 1 1⁄4" 2,886 3,117 2,513 2,309 2,588

72" 1 1⁄4" 3,029 3,271 2,657 2,449 2,742

84" 1 1⁄4" 3,173 3,427 2,800 2,589 2,899

96" 1 1⁄4" 3,317 3,582 2,920 2,705 3,029

RM6072 12" 1 1⁄2" 1,024 1,106 949 813 910

24" 1 1⁄2" 1,611 1,739 1,448 1,275 1,428

36" 1 1⁄2" 2,196 2,372 1,923 1,738 1,945

48" 1 1⁄2" 2,671 2,885 2,146 1,954 2,189

60" 1 1⁄2" 3,146 3,397 2,369 2,171 2,432

72" 1 1⁄2" 3,318 3,583 2,592 2,388 2,673

84" 1 1⁄2" 3,492 3,771 2,815 2,603 2,916

96" 1 1⁄2" 3,665 3,958 3,038 2,819 3,159

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.

• Specify leather color.

NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.

English Bridle Leather Pulls

RM6061

RM6071

Page 45: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 45

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

EN

GLI

SH

BR

IDLE

LE

AT

HE

RR

M6

08

0 -

RM

60

92

Straight Pulls - Round Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6080 12" 1" 860 929 758 627 702

24" 1" 1,151 1,243 1,089 926 1,038

36" 1" 1,526 1,646 1,397 1,226 1,374

48" 1" 1,899 2,050 1,708 1,528 1,712

60" 1" 2,288 2,470 2,018 1,829 2,048

72" 1" 2,675 2,890 2,328 2,131 2,387

84" 1" 2,892 3,123 2,447 2,246 2,515

96" 1" 3,107 3,357 2,565 2,361 2,645

RM6081 12" 1 1⁄4" 866 934 854 720 806

24" 1 1⁄4" 1,409 1,521 1,315 1,145 1,283

36" 1 1⁄4" 1,952 2,107 1,754 1,572 1,761

48" 1 1⁄4" 2,399 2,592 2,136 1,943 2,177

60" 1 1⁄4" 2,847 3,074 2,518 2,315 2,593

72" 1 1⁄4" 2,992 3,231 2,663 2,455 2,749

84" 1 1⁄4" 3,134 3,386 2,806 2,594 2,906

96" 1 1⁄4" 3,279 3,541 2,925 2,710 3,036

RM6082 12" 1 1⁄2" 985 1,064 954 818 917

24" 1 1⁄2" 1,572 1,698 1,453 1,280 1,434

36" 1 1⁄2" 2,157 2,331 1,929 1,743 1,952

48" 1 1⁄2" 2,633 2,843 2,151 1,959 2,194

60" 1 1⁄2" 3,107 3,357 2,374 2,176 2,437

72" 1 1⁄2" 3,280 3,543 2,598 2,393 2,680

84" 1 1⁄2" 3,454 3,730 2,820 2,609 2,921

96" 1 1⁄2" 3,627 3,918 3,043 2,826 3,164

Offset Pulls - Round EndsRM6090 12" 1" 898 970 792 660 738

24" 1" 1,271 1,373 1,122 959 1,073

36" 1" 1,645 1,777 1,430 1,259 1,410

48" 1" 2,019 2,181 1,741 1,561 1,747

60" 1" 2,408 2,600 2,052 1,862 2,085

72" 1" 2,796 3,020 2,363 2,163 2,424

84" 1" 3,013 3,253 2,480 2,279 2,551

96" 1" 3,228 3,485 2,599 2,394 2,682

RM6091 12" 1 1⁄4" 985 1,064 888 753 844

24" 1 1⁄4" 1,529 1,650 1,348 1,178 1,320

36" 1 1⁄4" 2,072 2,237 1,787 1,605 1,797

48" 1 1⁄4" 2,519 2,721 2,169 1,977 2,213

60" 1 1⁄4" 2,967 3,205 2,552 2,348 2,630

72" 1 1⁄4" 3,111 3,360 2,696 2,488 2,787

84" 1 1⁄4" 3,255 3,517 2,839 2,627 2,942

96" 1 1⁄4" 3,399 3,671 2,959 2,743 3,072

RM6092 12" 1 1⁄2" 1,106 1,194 988 851 953

24" 1 1⁄2" 1,692 1,827 1,487 1,314 1,470

36" 1 1⁄2" 2,279 2,461 1,962 1,776 1,989

48" 1 1⁄2" 2,754 2,973 2,185 1,992 2,231

60" 1 1⁄2" 3,228 3,485 2,408 2,208 2,474

72" 1 1⁄2" 3,400 3,672 2,631 2,426 2,716

84" 1 1⁄2" 3,574 3,860 2,855 2,643 2,959

96" 1 1⁄2" 3,746 4,046 3,078 2,858 3,202

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.

• Specify leather color.

NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.

English Bridle Leather Pulls (con't)

RM6081

RM6091

Page 46: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.46

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

UP

HO

LS

TE

RY

LE

AT

HE

RR

M6

16

0 -

RM

61

72

Upholstery Leather Pulls

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.

• Specify leather color.

NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6160 12" 1" 728 788 654 541 607

24" 1" 1,032 1,115 853 741 829

36" 1" 1,427 1,541 1,184 1,050 1,175

48" 1" 1,821 1,966 1,494 1,360 1,522

60" 1" 2,103 2,273 1,675 1,539 1,724

72" 1" 2,513 2,714 1,985 1,850 2,072

84" 1" 2,685 2,899 2,090 1,955 2,189

96" 1" 2,911 3,145 2,209 2,074 2,324

RM6161 12" 1 1⁄4" 819 884 719 607 680

24" 1 1⁄4" 1,429 1,543 1,229 1,093 1,225

36" 1 1⁄4" 2,001 2,162 1,668 1,533 1,717

48" 1 1⁄4" 2,474 2,672 2,050 1,916 2,145

60" 1 1⁄4" 2,820 3,046 2,336 2,201 2,465

72" 1 1⁄4" 2,972 3,210 2,481 2,345 2,627

84" 1 1⁄4" 3,123 3,373 2,591 2,456 2,751

96" 1 1⁄4" 3,276 3,537 2,711 2,576 2,886

RM6162 12" 1 1⁄2" 930 1,006 768 655 734

24" 1 1⁄2" 1,548 1,673 1,375 1,240 1,388

36" 1 1⁄2" 2,166 2,339 1,851 1,717 1,922

48" 1 1⁄2" 2,667 2,880 2,074 1,939 2,173

60" 1 1⁄2" 3,166 3,420 2,297 2,162 2,421

72" 1 1⁄2" 3,349 3,617 2,520 2,386 2,672

84" 1 1⁄2" 3,532 3,815 2,743 2,608 2,921

96" 1 1⁄2" 3,714 4,011 2,967 2,832 3,172

Offset Pulls - Flat EndsRM6170 12" 1" 769 830 687 575 644

24" 1" 1,072 1,158 886 774 868

36" 1" 1,467 1,585 1,218 1,083 1,213

48" 1" 1,860 2,009 1,529 1,393 1,561

60" 1" 2,144 2,315 1,707 1,573 1,762

72" 1" 2,553 2,757 2,019 1,884 2,110

84" 1" 2,725 2,943 2,124 1,989 2,228

96" 1" 2,951 3,188 2,243 2,107 2,361

RM6171 12" 1 1⁄4" 859 928 753 641 717

24" 1 1⁄4" 1,469 1,587 1,263 1,128 1,263

36" 1 1⁄4" 2,042 2,205 1,701 1,567 1,754

48" 1 1⁄4" 2,514 2,715 2,085 1,948 2,183

60" 1 1⁄4" 2,861 3,091 2,369 2,235 2,502

72" 1 1⁄4" 3,013 3,254 2,514 2,380 2,663

84" 1 1⁄4" 3,163 3,417 2,624 2,490 2,788

96" 1 1⁄4" 3,315 3,580 2,746 2,609 2,922

RM6172 12" 1 1⁄2" 971 1,049 801 689 771

24" 1 1⁄2" 1,589 1,717 1,409 1,274 1,427

36" 1 1⁄2" 2,206 2,383 1,885 1,750 1,960

48" 1 1⁄2" 2,707 2,923 2,107 1,973 2,209

60" 1 1⁄2" 3,207 3,465 2,331 2,196 2,459

72" 1 1⁄2" 3,389 3,660 2,554 2,419 2,710

84" 1 1⁄2" 3,573 3,858 2,777 2,643 2,960

96" 1 1⁄2" 3,755 4,055 3,000 2,865 3,210

RM6161

RM6171

Page 47: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 47

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

Upholstery Leather Pulls (con't)

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $76 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• FW (Full Wrap) available up to 72" overall length pull - Call for pricing.

• Specify leather color.

NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.

RM

61

80

- R

M6

19

2U

PH

OL

ST

ER

Y L

EA

TH

ER

Straight Pulls - Round Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6180 12" 1" 816 880 694 580 651

24" 1" 1,118 1,209 893 779 873

36" 1" 1,514 1,634 1,223 1,088 1,219

48" 1" 1,907 2,059 1,534 1,399 1,567

60" 1" 2,191 2,365 1,715 1,579 1,769

72" 1" 2,599 2,808 2,025 1,889 2,115

84" 1" 2,770 2,992 2,129 1,994 2,234

96" 1" 2,998 3,237 2,249 2,113 2,366

RM6181 12" 1 1⁄4" 905 978 759 646 723

24" 1 1⁄4" 1,516 1,637 1,269 1,133 1,270

36" 1 1⁄4" 2,088 2,255 1,706 1,572 1,761

48" 1 1⁄4" 2,560 2,765 2,090 1,955 2,189

60" 1 1⁄4" 2,907 3,139 2,377 2,240 2,510

72" 1 1⁄4" 3,058 3,304 2,519 2,385 2,671

84" 1 1⁄4" 3,210 3,467 2,630 2,495 2,794

96" 1 1⁄4" 3,362 3,631 2,751 2,616 2,929

RM6182 12" 1 1⁄2" 1,017 1,099 807 695 777

24" 1 1⁄2" 1,636 1,767 1,415 1,279 1,433

36" 1 1⁄2" 2,252 2,433 1,890 1,755 1,966

48" 1 1⁄2" 2,754 2,973 2,113 1,979 2,216

60" 1 1⁄2" 3,254 3,513 2,336 2,201 2,465

72" 1 1⁄2" 3,435 2,691 2,561 2,425 2,716

84" 1 1⁄2" 3,618 3,908 2,784 2,648 2,965

96" 1 1⁄2" 3,801 4,104 3,006 2,870 3,215

Offset Pulls - Round EndsRM6190 12" 1" 856 924 726 614 689

24" 1" 1,159 1,251 926 814 911

36" 1" 1,554 1,678 1,257 1,122 1,257

48" 1" 1,947 2,102 1,568 1,433 1,605

60" 1" 2,231 2,409 1,748 1,613 1,806

72" 1" 2,640 2,850 2,058 1,924 2,154

84" 1" 2,811 3,036 2,163 2,028 2,272

96" 1" 3,039 3,281 2,283 2,147 2,405

RM6191 12" 1 1⁄4" 946 1,022 793 680 761

24" 1 1⁄4" 1,557 1,680 1,302 1,167 1,307

36" 1 1⁄4" 2,128 2,299 1,741 1,607 1,798

48" 1 1⁄4" 2,600 2,809 2,124 1,989 2,228

60" 1 1⁄4" 2,947 3,183 2,409 2,275 2,548

72" 1 1⁄4" 3,099 3,347 2,553 2,418 2,708

84" 1 1⁄4" 3,251 3,510 2,663 2,529 2,833

96" 1 1⁄4" 3,402 3,674 2,785 2,649 2,967

RM6192 12" 1 1⁄2" 1,058 1,141 840 727 816

24" 1 1⁄2" 1,676 1,807 1,448 1,314 1,471

36" 1 1⁄2" 2,292 2,476 1,925 1,789 2,004

48" 1 1⁄2" 2,794 3,017 2,147 2,012 2,254

60" 1 1⁄2" 3,294 3,557 2,369 2,235 2,502

72" 1 1⁄2" 3,475 3,754 2,594 2,459 2,754

84" 1 1⁄2" 3,659 3,951 2,816 2,682 3,004

96" 1 1⁄2" 3,841 4,147 3,040 2,905 3,254

RM6181

RM6191

Page 48: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.48

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

62

00

- R

M6

24

0LE

AT

HE

R O

VA

L

Leather Oval - Ergonomic Pulls

True Oval

PartMax OA Grip Size

Stock PC 10BE 32D/630 32/629

RM6200 12" 1" x 1 1/2" 951 815 913

24" 1" x 1 1/2" 1,332 1,163 1,302

36" 1" x 1 1/2" 1,689 1,510 1,691

48" 1" x 1 1/2" 2,048 1,857 2,080

60" 1" x 1 1/2" 2,405 2,205 2,469

72" 1" x 1 1/2" 2,763 2,552 2,859

84" 1" x 1 1/2" 3,120 2,900 3,248

96" 1" x 1 1/2" 3,478 3,247 3,636

Flat Oval - 3⁄4" Diameter Posts

RM6220 12" 3/4" x 1 1/2" 991 854 957

24" 3/4" x 1 1/2" 1,366 1,196 1,340

36" 3/4" x 1 1/2" 1,719 1,538 1,723

48" 3/4" x 1 1/2" 2,071 1,881 2,105

60" 3/4" x 1 1/2" 2,423 2,223 2,489

72" 3/4" x 1 1/2" 2,775 2,564 2,871

84" 3/4" x 1 1/2" 3,127 2,907 3,256

96" 3/4" x 1 1/2" 3,479 3,248 3,638

Flat Oval - 1" Diameter Posts

RM6230 12" 3/4" x 1 1/2" 1,049 887 996

24" 3/4" x 1 1/2" 1,401 1,230 1,378

36" 3/4" x 1 1/2" 1,754 1,572 1,761

48" 3/4" x 1 1/2" 2,105 1,915 2,144

60" 3/4" x 1 1/2" 2,458 2,256 2,527

72" 3/4" x 1 1/2" 2,810 2,598 2,910

84" 3/4" x 1 1/2" 3,162 2,941 3,293

96" 3/4" x 1 1/2" 3,514 3,282 3,676

Flat Oval - 3⁄4"x 1 1⁄2" Diameter Posts

RM6240 12" 3/4" x 1 1/2" 1,182 1,017 1,139

24" 3/4" x 1 1/2" 1,534 1,359 1,522

36" 3/4" x 1 1/2" 1,886 1,701 1,905

48" 3/4" x 1 1/2" 2,239 2,043 2,288

60" 3/4" x 1 1/2" 2,590 2,385 2,671

72" 3/4" x 1 1/2" 2,942 2,727 3,054

84" 3/4" x 1 1/2" 3,295 3,069 3,437

96" 3/4" x 1 1/2" 3,647 3,412 3,821

• Add $6.50/in. over 96".

• MP (Mid Post) - Add $68 each. (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Specify leather color.

NOTE: All long pulls include charge for leather between mounting posts up to a maximum of 72" of leather cover.

RM6200

RM6220

RM6230

RM6240

Page 49: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 49

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

Flush Leather Pulls

Straight Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6300 12" 1" 866 934 819 686 768

24" 1" 1,291 1,395 1,245 1,079 1,209

36" 1" 1,718 1,855 1,649 1,470 1,647

48" 1" 2,144 2,315 2,053 1,863 2,087

60" 1" 2,570 2,775 2,457 2,255 2,526

72" 1" 2,996 3,235 2,860 2,648 2,965

84" 1" 3,422 3,695 3,264 3,040 3,404

96" 1" 3,848 4,157 3,668 3,431 3,843

RM6310 12" 1 1⁄4" 1,038 1,121 951 815 913

24" 1 1⁄4" 1,482 1,599 1,381 1,210 1,355

36" 1 1⁄4" 1,926 2,079 1,786 1,603 1,796

48" 1 1⁄4" 2,368 2,558 2,191 1,998 2,238

60" 1 1⁄4" 2,812 3,038 2,598 2,393 2,680

72" 1 1⁄4" 3,256 3,517 3,004 2,788 3,122

84" 1 1⁄4" 3,701 3,996 3,410 3,181 3,563

96" 1 1⁄4" 4,143 4,475 3,817 3,576 4,006

RM6320 12" 1 1⁄2" 1,123 1,214 1,058 898 1,005

24" 1 1⁄2" 1,579 1,704 1,476 1,304 1,460

36" 1 1⁄2" 2,035 2,197 1,895 1,710 1,915

48" 1 1⁄2" 2,490 2,689 2,314 2,117 2,370

60" 1 1⁄2" 2,946 3,181 2,732 2,522 2,826

72" 1 1⁄2" 3,401 3,674 3,150 2,928 3,281

84" 1 1⁄2" 3,857 4,166 3,569 3,336 3,736

96" 1 1⁄2" 4,313 4,658 3,987 3,742 4,191

RM

63

00

- R

M6

32

0FL

US

H L

EA

TH

ER

RM6310

• Add $6.50/in. over 96".

• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Specify leather type and color.

Page 50: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.50

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

63

04

- R

M6

35

0FL

US

H L

EA

TH

ER

Flush Leather Pulls (cont')

Offset Pulls - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6330 12" 1" 904 976 858 724 812

24" 1" 1,330 1,436 1,284 1,117 1,251

36" 1" 1,755 1,897 1,688 1,509 1,690

48" 1" 2,182 2,356 2,093 1,901 2,129

60" 1" 2,608 2,816 2,496 2,293 2,568

72" 1" 3,033 3,277 2,899 2,686 3,008

84" 1" 3,460 3,737 3,303 3,078 3,448

96" 1" 3,887 4,197 3,708 3,470 3,887

RM6340 12" 1 1⁄4" 1,077 1,163 990 853 956

24" 1 1⁄4" 1,520 1,641 1,420 1,247 1,397

36" 1 1⁄4" 1,964 2,121 1,826 1,642 1,839

48" 1 1⁄4" 2,407 2,600 2,232 2,037 2,281

60" 1 1⁄4" 2,850 3,078 2,638 2,432 2,723

72" 1 1⁄4" 3,294 3,558 3,043 2,826 3,164

84" 1 1⁄4" 3,738 4,037 3,449 3,219 3,607

96" 1 1⁄4" 4,182 4,516 3,856 3,614 4,048

RM6350 12" 1 1⁄2" 1,162 1,254 1,097 935 1,047

24" 1 1⁄2" 1,617 1,746 1,516 1,342 1,503

36" 1 1⁄2" 2,073 2,238 1,935 1,748 1,958

48" 1 1⁄2" 2,528 2,731 2,353 2,154 2,413

60" 1 1⁄2" 2,985 3,223 2,772 2,561 2,868

72" 1 1⁄2" 3,439 3,715 3,190 2,967 3,323

84" 1 1⁄2" 3,895 4,208 3,608 3,374 3,778

96" 1 1⁄2" 4,350 4,699 4,026 3,781 4,234

Straight Pulls - Round Ends

RM6304 12" 1" 953 1,029 869 735 823

24" 1" 1,379 1,489 1,296 1,128 1,264

36" 1" 1,805 1,950 1,699 1,520 1,702

48" 1" 2,231 2,410 2,103 1,913 2,142

60" 1" 2,657 2,869 2,507 2,304 2,581

72" 1" 3,083 3,330 2,912 2,697 3,020

84" 1" 3,509 3,790 3,314 3,089 3,459

96" 1" 3,935 4,250 3,718 3,481 3,898

RM6314 12" 1 1⁄4" 1,125 1,216 1,003 865 967

24" 1 1⁄4" 1,569 1,694 1,430 1,259 1,410

36" 1 1⁄4" 2,012 2,174 1,836 1,652 1,851

48" 1 1⁄4" 2,456 2,653 2,243 2,047 2,293

60" 1 1⁄4" 2,900 3,131 2,649 2,442 2,735

72" 1 1⁄4" 3,344 3,611 3,054 2,837 3,177

84" 1 1⁄4" 3,787 4,090 3,461 3,231 3,618

96" 1 1⁄4" 4,231 4,569 3,867 3,626 4,061

RM6324 12" 1 1⁄2" 1,211 1,308 1,110 947 1,060

24" 1 1⁄2" 1,667 1,799 1,528 1,353 1,515

36" 1 1⁄2" 2,122 2,291 1,946 1,758 1,970

48" 1 1⁄2" 2,578 2,784 2,365 2,165 2,425

60" 1 1⁄2" 3,032 3,276 2,783 2,572 2,882

72" 1 1⁄2" 3,489 3,768 3,200 2,978 3,336

84" 1 1⁄2" 3,944 4,261 3,620 3,385 3,791

96" 1 1⁄2" 4,400 4,752 4,038 3,791 4,246

• Add $6.50/in. over 96".

• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for guidelines.)

• Specify leather type and color.

RM6340

RM6314

Page 51: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 51

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

63

34

- R

M6

35

4FL

US

H L

EA

TH

ER

Offset Pulls - Round Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6334 12" 1" 990 1,070 908 773 867

24" 1" 1,417 1,531 1,336 1,166 1,306

36" 1" 1,844 1,991 1,739 1,559 1,745

48 " 1" 2,270 2,450 2,142 1,951 2,184

60" 1" 2,696 2,911 2,546 2,342 2,623

72" 1" 3,122 3,371 2,951 2,735 3,062

84" 1" 3,548 3,831 3,354 3,127 3,503

96" 1" 3,974 4,292 3,758 3,520 3,942

RM6344 12" 1 1⁄4" 1,164 1,257 1,064 903 1,011

24" 1 1⁄4" 1,608 1,735 1,470 1,297 1,452

36" 1 1⁄4" 2,050 2,215 1,876 1,691 1,894

48" 1 1⁄4" 2,494 2,695 2,283 2,086 2,336

60" 1 1⁄4" 2,939 3,173 2,688 2,481 2,778

72" 1 1⁄4" 3,382 3,653 3,094 2,874 3,219

84" 1 1⁄4" 3,825 4,132 3,500 3,269 3,662

96" 1 1⁄4" 4,269 4,610 3,906 3,664 4,103

RM6354 12" 1 1⁄2" 1,248 1,348 1,149 984 1,103

24" 1 1⁄2" 1,704 1,840 1,567 1,390 1,559

36" 1 1⁄2" 2,159 2,333 1,986 1,797 2,013

48" 1 1⁄2" 2,616 2,825 2,403 2,204 2,468

60" 1 1⁄2" 3,071 3,317 2,821 2,610 2,923

72" 1 1⁄2" 3,527 3,810 3,240 3,017 3,378

84" 1 1⁄2" 3,982 4,301 3,659 3,423 3,834

96" 1 1⁄2" 4,438 4,794 4,077 3,829 4,289

Flush Leather Pulls (cont')

• Add $6.50/in. over 96".

• Up to 96" available with mid-post (Recommended for maximum rigidity on long door pulls. See page 5 for

guidelines.)

• Specify leather type and color.

RM6344

Page 52: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.52

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

64

00

- R

M6

44

0U

PH

OL

ST

ER

Y L

EA

TH

ER

Upholstery Leather GeoMetek - Narrow Profile Pulls

Straight Square End Pulls

Part CTC Grip SizeStock PC

10BE 32D/630 32/629

RM6400 12" 3/4" x 3/4" 645 532 596

24" 3/4" x 3/4" 1,035 901 1,009

36" 3/4" x 3/4" 1,404 1,269 1,421

48" 3/4" x 3/4" 1,772 1,637 1,833

RM6440 12" 1 1/4" x 1 1/4" 748 635 712

24" 1 1/4" x 1 1/4" 1,236 1,102 1,232

36" 1 1/4" x 1 1/4" 1,700 1,566 1,753

48" 1 1/4" x 1 1/4" 2,165 2,031 2,275

Straight Rectangular End Pulls

RM6410 12" 3/4" x 1 1/2" 754 642 718

24" 3/4" x 1 1/2" 1,086 951 1,065

36" 3/4" x 1 1/2" 1,396 1,261 1,412

48" 3/4" x 1 1/2" 1,704 1,570 1,758

60" 3/4" x 1 1/2" 2,015 1,880 2,104

72" 3/4" x 1 1/2" 2,325 2,189 2,451

84" 3/4" x 1 1/2" 2,634 2,498 2,799

96" 3/4" x 1 1/2" 2,943 2,808 3,146

Offset Square End Pulls

RM6420 12" 3/4" x 3/4" 684 572 641

24" 3/4" x 3/4" 1,075 939 1,053

36" 3/4" x 3/4" 1,442 1,308 1,465

48" 3/4" x 3/4" 1,811 1,676 1,877

Offset Rectangular End Pulls

RM6430 12" 3/4" x 1 1/2" 794 681 763

24" 3/4" x 1 1/2" 1,125 990 1,110

36" 3/4" x 1 1/2" 1,435 1,299 1,456

48" 3/4" x 1 1/2" 1,744 1,610 1,802

60" 3/4" x 1 1/2" 2,053 1,919 2,149

72" 3/4" x 1 1/2" 2,363 2,229 2,496

84" 3/4" x 1 1/2" 2,673 2,538 2,842

96" 3/4" x 1 1/2" 2,981 2,847 3,189

RM6420

RM6400

RM6430

RM6410

Page 53: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 53

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

65

00

- R

M6

73

0LE

AT

HE

R

Leather - Small Pulls for Cabinets, Casework & Closet Doors

Straight Surface Wrapped - Flat Ends

PartMax OA Dia.

3/6054/606

10/61210B/613

Stock PC 10BE 32D/630 32/629

RM6500-4 5 7⁄8" 1⁄2" 197 213 208 148 158

RM6500-5 6 7⁄8" 1⁄2" 211 227 218 159 170

RM6510-5 6 7⁄8" 5⁄8" 242 261 249 188 204

RM6510-6 7 7⁄8" 5⁄8" 271 294 276 216 231

Offset Surface Wrapped - Flat Ends

RM6530-5 7" 5⁄8" 322 242 260

RM6530-6 8" 5⁄8" 351 268 287

Straight Surface Wrapped - Round Ends

RM6540-4 5 7⁄8" 1⁄2" 217 235 226 167 178

RM6540-5 6 7⁄8" 1⁄2" 232 252 239 180 192

RM6550-5 7" 5⁄8" 264 285 269 209 222

RM6550-6 8" 5⁄8" 293 315 312 234 250

Offset Surface Wrapped - Round Ends

RM6570-5 7" 5⁄8" 344 262 213

RM6570-6 8" 5⁄8" 374 288 247

Straight Flush Wrapped - Flat Ends

RM6610-5 6 7⁄8" 5⁄8" 271 294 260 199 213

RM6610-6 7 7⁄8" 5⁄8" 305 331 327 232 247

Offset Flush Wrapped - Flat Ends

RM6630-5 6 7⁄8" 5⁄8" 336 242 260

RM6630-6 7 7⁄8" 5⁄8" 372 276 295

Straight Flush Wrapped - Round Ends

RM6650-5 6 7⁄8" 5⁄8" 286 307 273 213 227

RM6650-6 7 7⁄8" 5⁄8" 321 348 339 245 263

Offset Flush Wrapped - Round Ends

RM6670-5 6 7⁄8" 5⁄8" 351 256 273

RM6670-6 7 7⁄8" 5⁄8" 383 288 307

Straight Full Wrapped - Flat Ends

RM6700-4 5 7⁄8" 1⁄2" 226 243 240 191 206

RM6700-5 6 7⁄8" 1⁄2" 254 273 271 216 231

RM6710-5 6 7⁄8" 5⁄8" 277 300 297 237 255

RM6710-6 7 7⁄8" 5⁄8" 311 335 332 268 287

Offset Full Wrapped - Flat Ends

RM6730-5 6 7⁄8" 5⁄8" 348 280 299

RM6730-6 7 7⁄8" 5⁄8" 381 311 332

• Any size made to order.

• Specify leather type and color.

RM6500

RM6530

RM6650

RM6670

Page 54: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.54

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

RM

72

10

- R

M7

45

0N

EO

CY

LIN

DE

R /

NE

OM

ITR

E

NeoMitre - with or without GripZone

Straight Pulls without GripZone

Part CTC Dia.Stock PC

10BE 32D/630 32/629

RM7300 12" 1" 470 357 400

24" 1" 551 435 486

36" 1" 655 511 572

RM7310 12" 1 1⁄4" 633 489 548

24" 1 1⁄4" 680 534 597

36" 1 1⁄4" 726 578 648

RM7320 12" 1 1⁄2" 728 580 650

24" 1 1⁄2" 776 626 702

36" 1 1⁄2" 823 673 752

Offset Pulls without GripZoneRM7330 12" 1" 515 400 447

24" 1" 594 476 533

36" 1" 700 553 620

RM7340 12" 1 1⁄4" 678 530 595

24" 1 1⁄4" 723 576 644

36" 1 1⁄4" 771 621 695

RM7350 12" 1 1⁄2" 773 623 697

24" 1 1⁄2" 820 670 749

36" 1 1⁄2" 867 714 799

Push Bars without GripZoneRM7302 Up to 36" 1" 655 511 572

RM7312 Up to 36" 1 1⁄4" 726 578 648

RM7322 Up to 36" 1 1⁄2" 823 673 752

Straight Pulls with GripZonePart CTC Dia. 32/629

RM7400 12" 1" 520

24" 1" 606

36" 1" 692

RM7410 12" 1 1⁄4" 668

24" 1 1⁄4" 718

36" 1 1⁄4" 767

RM7420 12" 1 1⁄2" 770

24" 1 1⁄2" 822

36" 1 1⁄2" 873

Offset Pulls with GripZoneRM7430 12" 1" 567

24" 1" 653

36" 1" 741

RM7440 12" 1 1⁄4" 715

24" 1 1⁄4" 765

36" 1 1⁄4" 816

RM7450 12" 1 1⁄2" 818

24" 1 1⁄2" 869

36" 1 1⁄2" 922

Push Bars with GripZoneRM7402 Up to 36" 1" 692

RM7412 Up to 36" 1 1⁄4" 767

RM7422 Up to 36" 1 1⁄2" 873

• Add $6.50/in. over 36".

NOTE: Post location on push bars can be located 1⁄8" from end for narrow & medium stile doors and 1" from end for

flush and wide stile doors.

NeoCylinder - with or without GripZone

Straight Pulls without GripZone

Part CTC Dia.Stock PC

10BE 32D/630 32/629

RM7210 12" 1 1⁄4" 445 331 370

24" 1 1⁄4" 504 386 434

36" 1 1⁄4" 562 443 495

Offset Pulls without GripZoneRM7220 12" 1 1⁄4" 489 374 418

24" 1 1⁄4" 548 430 481

36" 1 1⁄4" 608 486 545

Straight Pulls with GripZoneRM7230 12" 1 1⁄4" 492

24" 1 1⁄4" 556

36" 1 1⁄4" 620

Offset Pulls with GripZoneRM7240 12" 1 1⁄4" 535

24" 1 1⁄4" 599

36" 1 1⁄4" 662

Push Bar without GripZoneRM7212 Up to 36" 1 1⁄4" 562 443 495

Push Bar with GripZoneRM7232 Up to 36" 1 1⁄4" 620

• Add $6.50/in. over 36".

RM7210

RM7240

RM7310

RM7340

RM7410

RM7440

Page 55: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 55

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

GeoMetek - Hex Pulls

Flat End - Square Post

Part Max OA Grip Stock PC / 10BE 32D/630 32/629

RM7700 12" 1" 542 415 465

24" 1" 615 462 517

36" 1" 667 509 569

48" 1" 717 555 622

60" 1" 767 602 673

72" 1" 817 648 726

84" 1" 867 694 777

96" 1" 917 742 830

GeoMetek - Diamond Pulls

Flat End - Square Post

Part Max OA Grip Stock PC / 10BE 32D/630 32/629

RM7800 12" 3⁄4" x 3⁄4" 460 334 372

24" 3⁄4" x 3⁄4" 508 379 425

36" 3⁄4" x 3⁄4" 559 426 476

48" 3⁄4" x 3⁄4" 633 471 528

RM7840 12" 1" x 1" 506 367 410

24" 1" x 1" 559 417 468

36" 1" x 1" 614 469 524

48" 1" x 1" 696 518 581

Flat End - Diamond Post

RM7805 12" 3⁄4" x 3⁄4" 489 361 405

24" 3⁄4" x 3⁄4" 539 408 456

36" 3⁄4" x 3⁄4" 590 454 510

48" 3⁄4" x 3⁄4" 665 501 560

RM7845 12" 1" x 1" 539 397 446

24" 1" x 1" 592 449 502

36" 1" x 1" 649 500 561

48" 1" x 1" 731 551 616

Flat End - Offset Post

RM7825 12" 3⁄4" x 3⁄4" 526 399 447

24" 3⁄4" x 3⁄4" 575 446 498

36" 3⁄4" x 3⁄4" 627 492 552

48" 3⁄4" x 3⁄4" 701 539 602

RM7860 12" 1" x 1" 552 419 469

24" 1" x 1" 604 468 522

36" 1" x 1" 658 516 579

48" 1" x 1" 736 565 632

Diamond End - Square Post

RM7810 12" 3⁄4" x 3⁄4" 637 475 550

24" 3⁄4" x 3⁄4" 688 522 584

36" 3⁄4" x 3⁄4" 739 569 639

48" 3⁄4" x 3⁄4" 790 616 689

RM7850 12" 1" x 1" 701 523 605

24" 1" x 1" 757 574 643

36" 1" x 1" 813 626 703

48" 1" x 1" 868 677 758

• Add $9.70/in. over 96".

• Add $9.70/in. over 48".

GE

OM

ET

EK

RM

77

00

- R

M7

83

5

RM7700

RM7800

Page 56: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.56

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

GE

OM

ET

EK

RM

79

00

- R

M7

94

0

GeoMetek - Narrow Profile Pulls

Straight Square End Pulls

Part CTC Grip Size Stock PC / 10BE 32D/630 32/629

RM7900 12" 3⁄4" x 3⁄4" 303 221 248

24" 3⁄4" x 3⁄4" 392 268 300

36" 3⁄4" x 3⁄4" 443 315 352

48" 3⁄4" x 3⁄4" 495 362 406

RM7907 12" 1" x 1" 334 244 273

24" 1" x 1" 431 295 329

36" 1" x 1" 487 346 388

48" 1" x 1" 543 399 447

RM7940 12" 1 1⁄4" x 1 1⁄4" 405 281 315

24" 1 1⁄4" x 1 1⁄4" 464 335 373

36" 1 1⁄4" x 1 1⁄4" 522 388 434

48" 1 1⁄4" x 1 1⁄4" 579 441 492

Straight Square Bridge PullsPart Max OA Grip Size Stock PC / 10BE 32D/630 32/629

RM7902 12" 3⁄4" x 3⁄4" 396 273 305

24" 3⁄4" x 3⁄4" 446 318 357

36" 3⁄4" x 3⁄4" 497 365 409

48" 3⁄4" x 3⁄4" 546 410 459

RM7917 12" 1" x 1" 437 301 338

24" 1" x 1" 490 350 392

36" 1" x 1" 546 402 450

48" 1" x 1" 602 451 506

Straight Rectangular End PullsPart CTC Grip Size Stock PC / 10BE 32D/630 32/629

RM7910 12" 3⁄4" x 1 1⁄2" 378 256 286

24" 3⁄4" x 1 1⁄2" 585 445 498

36" 3⁄4" x 1 1⁄2" 816 634 710

48" 3⁄4" x 1 1⁄2" 1019 822 921

RM7900

• Add $9.70/in. over 48".

• Add $9.70/in. over 48".

RM7902

GeoMetek - Diamond Pulls (cont.)

Diamond End - Diamond Post

Part Max OA Grip Stock PC / 10BE 32D/630 32/629

RM7815 12" 3⁄4" x 3⁄4" 670 506 565

24" 3⁄4" x 3⁄4" 719 551 618

36" 3⁄4" x 3⁄4" 771 599 670

48" 3⁄4" x 3⁄4" 819 644 721

RM7855 12" 1" x 1" 737 557 621

24" 1" x 1" 792 606 680

36" 1" x 1" 847 659 737

48" 1" x 1" 901 708 794

Diamond End - Offset PostRM7835 12" 3⁄4" x 3⁄4" 707 544 607

24" 3⁄4" x 3⁄4" 756 589 660

36" 3⁄4" x 3⁄4" 807 636 712

48" 3⁄4" x 3⁄4" 856 681 763

RM7865 12" 1" x 1" 742 571 638

24" 1" x 1" 794 618 693

36" 1" x 1" 847 668 748

48" 1" x 1" 899 715 801

RM7835

RM7815

Page 57: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 57

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

RM

79

20

- R

M7

96

0G

EO

ME

TE

K

GeoMetek - Narrow Profile Pulls (cont')

Straight Rectangular Bridge Pulls

Part Max OA Grip Size Stock PC / 10BE 32D/630 32/629

RM7912 12" 3⁄4" x 1 1⁄2" 431 304 341

24" 3⁄4" x 1 1⁄2" 663 493 553

36" 3⁄4" x 1 1⁄2" 868 682 764

48" 3⁄4" x 1 1⁄2" 1074 871 975

Offset Pulls

Part CTC Grip Size Stock PC / 10BE 32D/630 32/629

RM7920 12" 3⁄4" x 3⁄4" 381 258 288

24" 3⁄4" x 3⁄4" 427 301 338

36" 3⁄4" x 3⁄4" 476 346 387

48" 3⁄4" x 3⁄4" 523 389 435

RM7927 12" 1" x 1" 420 284 318

24" 1" x 1" 470 330 370

36" 1" x 1" 523 380 426

48" 1" x 1" 576 427 478

RM7930 12" 3⁄4" x 1 1⁄2" 428 302 339

24" 3⁄4" x 1 1⁄2" 650 482 540

36" 3⁄4" x 1 1⁄2" 847 663 743

48" 3⁄4" x 1 1⁄2" 1043 842 944

Offset Square Bridge Pull

Part Max OA Grip Size Stock PC / 10BE 32D/630 32/629

RM7925 12" 3⁄4" x 3⁄4" 433 311 348

24" 3⁄4" x 3⁄4" 482 356 399

36" 3⁄4" x 3⁄4" 533 403 451

48" 3⁄4" x 3⁄4" 606 448 501

RM7937 12" 1" x 1" 454 326 366

24" 1" x 1" 506 373 419

36" 1" x 1" 560 423 473

48" 1" x 1" 635 470 527

Offset Rectangular Bridge Pull

RM7935 12" 3⁄4" x 1 1⁄2" 466 342 383

24" 3⁄4" x 1 1⁄2" 696 530 594

36" 3⁄4" x 1 1⁄2" 903 720 807

48" 3⁄4" x 1 1⁄2" 1,131 908 1,018

Straight Rectangular End Stepped Post Pull

Part CTC Grip Size Stock PC / 10BE 32D/630 32/629

RM7960 12" 3⁄4" x 3⁄4" 431 304 341

24" 3⁄4" x 3⁄4" 488 357 400

36" 3⁄4" x 3⁄4" 544 408 456

48" 3⁄4" x 3⁄4" 627 461 516

Straight Rectangular End Stepped Post Cast Pull

Part CTC Grip Size3/6054/606

10/61210B/613 15/619

RM7960 12" 3⁄4" x 3⁄4" 420 431 460

• Add $9.70/in. over 48".

RM7920

RM7925

RM7960

Page 58: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.58

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

LP3

30

1 -

LP

33

05

LOC

KIN

G D

OO

R P

ULL

SY

ST

EM

Locking Door Pulls

PostMount - Round

Part Description3/6054/606

Stock PC 10BE

10B/613 10BL/614 32D/630 32/629

LP3301DBD Half Height Pull - Bolts Down 1,933 1,550 2,088 1,112 1,243

LP3301DBU Half Height Pull - Bolts Up 2,121 1,653 2,291 1,199 1,343

LP3301FHD Full Height Pull - Bolts Down 2,346 1,751 2,537 1,284 1,439

LP3301FHU Full Height Pull - Bolts Up 2,574 1,868 2,781 1,386 1,553

LP3301FHB Full Height Pull - Bolts Up and Down 2,835 2,148 3,060 1,628 1,825

Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)

LP3301DBDBEPB Bent End Both Sides 2,571 1,974 2,776 1,529 1,654

LP3301DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450

LP3301DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450

LP3301DBDPMPB Post Mount Both Sides 2,820 2,107 3,048 1,593 1,785

LP3301DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564

LP3301DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564

Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)

LP3301DBUBEPB Bent End Both Sides 2,571 1,974 2,776 1,529 1,654

LP3301DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450

LP3301DBUBEPC Bent End Cylinder Side - Mating Side Vertical 2,252 1,763 2,433 1,295 1,450

LP3301DBUPMPB Post Mount Both Sides 2,820 2,107 3,048 1,593 1,785

LP3301DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564

LP3301DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 2,471 1,880 2,668 1,395 1,564

Round - 10" Clearance on Cylinder Side

LP3305DBDRound Half Height Pull - Bolts Down /

Minimum of 10" Clearance on Keyside of Pull 1,975 1,593 2,130 1,155 1,285

LP3305FHD Full Height Pull - Bolts Down 2,396 1,799 2,587 1,332 1,486

LP3305FHU Full Height Pull - Bolts Up 2,629 1,918 2,836 1,437 1,604

LP3305FHB Full Height Pull - Bolts Up and Down 2,895 2,206 3,120 1,688 1,884

Horizontal Push/Pull Bar Option - 10" Clearance on Cylinder Side

Part Description3/6054/606

StockPC 10BE

10B/613 10BL/614 32D/630 32/629

LP3305DBDBEPB Bent End Both Sides 2,613 2,017 2,818 1,521 1,697

LP3305DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,294 1,806 2,474 1,338 1,492

LP3305DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,294 1,806 2,474 1,338 1,492

LP3305DBDPMPB Post Mount Both Sides 2,862 2,150 3,089 1,636 1,827

LP3305DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,513 1,923 2,710 1,439 1,605

LP3305DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,513 1,923 2,710 1,439 1,605

• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.

• Horizontal Push/Pull Option, add $13/in. over 36".

Order form available when ordering LP3301 AND LP3305.

LP3305 has a minimum of 10" clearance on the keyside to reduce interference with mobility devices.

Product comes standard with ADA thumbturn.

LP3305DBD

LP3301DBD

Page 59: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 59

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

Locking Door Pulls

NeoTek with GripZone - Round

Part Description 3/605 32/629

LP3401DBD Half Height Pull - Bolts Down 2,072 1,335

LP3401DBU Half Height Pull - Bolts Up 2,273 1,439

LP3401FHD Full Height Pull - Bolts Down 2,485 1,540

LP3401FHU Full Height Pull - Bolts Up 2,726 1,662

LP3401FHB Full Height Pull - Bolts Up and Down 2,988 1,902

Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)

LP3401DBDBEPB Bent End Both Sides 2,755 1,776

LP3401DBDBEPT Bent End Thumbturn Side - Mating Side Vertical 2,413 1,556

LP3401DBDBEPC Bent End Cylinder Side - Mating Side Vertical 2,413 1,556

LP3401DBDPMPB Post Mount Both Sides 2,755 1,776

LP3401DBDPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,413 1,556

LP3401DBDPMPC Post Mount Cylinder Side - Mating Side Vertical 2,413 1,556

Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)

LP3401DBUBEPB Bent End Both Sides 3,023 1,915

LP3401DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 2,648 1,677

LP3401DBUBEPC Bent End Cylinder Side - Mating Side Vertical 2,648 1,677

LP3401DBUPMPB Post Mount Both Sides 3,023 1,915

LP3401DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 2,648 1,677

LP3401DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 2,648 1,677

English Bridle Leather Wrapped - Round

Part Description3/6054/606

Stock PC 10BE

10B/613 10BL/614 32D/630 32/629

LP6061DBD Half Height Pull - Bolts Down 5,383 4,659 5,813 4,395 4,923

LP6061DBU Half Height Pull - Bolts Up 5,570 4,761 6,016 4,493 5,010

LP6061FHD Full Height Pull - Bolts Down 6,853 5,998 7,401 5,695 6,377

LP6061FHU Full Height Pull - Bolts Up 7,081 6,114 7,646 5,808 6,479

LP6061FHB Full Height Pull - Bolts Up and Down 7,342 6,395 7,926 6,080 6,721

Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)

LP6061DBDBEPB* Bent End Both Sides 6,992 5,553 7,551 5,265 5,854

LP6061DBDBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388

LP6061DBDBEPC* Bent End Cylinder Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388

LP6061DBDPMPB* Post Mount Both Sides 6,992 5,553 7,551 5,265 5,854

LP6061DBDPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388

LP6061DBDPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,186 5,106 6,682 4,830 5,388

• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.

• Horizontal Push/Pull Option, add $13/in. over 36".

*Price includes up to 42" of English Bridle Leather on vertical. Other options available upon request.

LP3

40

1 -

LP

60

61

LOC

KIN

G D

OO

R P

ULL

SY

ST

EM

LP3401DBD

LP6061DBD

Page 60: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.60

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

LP6

06

1 -

LP

61

61

LOC

KIN

G D

OO

R P

ULL

SY

ST

EM

Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)

Part Description3/6054/606

Stock PC 10BE

10B/613 10BL/614 32D/630 32/629

LP6061DBUBEPB* Bent End Both Sides 7,180 5,656 7,754 5,363 5,940

LP6061DBUBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474

LP6061DBUBEPC* Bent End Cylinder Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474

LP6061DBUPMPB* Post Mount Both Sides 7,180 5,656 7,754 5,363 5,940

LP6061DBUPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474

LP6061DBUPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,374 5,209 6,886 4,929 5,474

PostMount Upholstery Leather Wrapped - Round

LP6161DBD Half Height Pull - Bolts Down 5,277 4,564 5,699 4,302 4,820

LP6161DBU Half Height Pull - Bolts Up 5,465 4,666 5,903 4,402 4,907

LP6161FHD Full Height Pull - Bolts Down 6,510 5,645 7,031 5,352 5,995

LP6161FHU Full Height Pull - Bolts Up 6,737 5,761 7,276 5,465 6,096

LP6161FHB Full Height Pull - Bolts Up and Down 6,997 6,041 7,555 5,738 6,337

Horizontal Push/Pull Bar Option - Half Height – Bolts Down (DBD)

LP6161DBDBEPB* Bent End Both Sides 6,819 5,445 7,364 5,160 5,736

LP6161DBDBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249

LP6161DBDBEPC* Bent End Cylinder Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249

LP6161DBDPMPB* Post Mount Both Sides 6,819 5,445 7,364 5,160 5,736

LP6161DBDPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249

LP6161DBDPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,048 5,006 6,531 4,762 5,249

Horizontal Push/Pull Bar Option - Half Height – Bolts Up (DBU)

LP6161DBUBEPB* Bent End Both Sides 7,006 5,548 7,567 5,258 5,824

LP6161DBUBEPT* Bent End Thumbturn Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337

LP6161DBUBEPC* Bent End Cylinder Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337

LP6161DBUPMPB* Post Mount Both Sides 7,006 5,548 7,567 5,258 5,824

LP6161DBUPMPT* Post Mount Thumbturn Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337

LP6161DBUPMPC* Post Mount Cylinder Side - Mating Side Vertical 6,235 5,108 6,735 4,860 5,337

• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.

* Price includes up to 42" of English Bridle or Upolstery Leather on vertical.

Other options available upon request.

Locking Door Pulls (con’t)

LP6161DBD

Page 61: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 61

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

GeoMetek Upholstery Leather Wrapped - Square

Part Description3/6054/606

Stock PC 10BE

10B/613 10BL/614 32D/630 32/629

LP6440DBD Half Height Pull - Bolts Down 4,796 4,528 5,070

LP6440DBU Half Height Pull - Bolts Up 4,898 4,627 5,159

LP6440FHD Full Height Pull - Bolts Down 5,876 5,576 6,244

LP6440FHU Full Height Pull - Bolts Up 5,993 5,691 6,346

LP6440FHB Full Height Pull - Bolts Up and Down 6,273 5,963 6,588

GeoMetek - SquareLP7901DBD Half Height Pull - Bolts Down 1,642 1,333 1,426

LP7901DBU Half Height Pull - Bolts Up 1,749 1,436 1,537

LP7901FHD Full Height Pull - Bolts Down 1,859 1,542 1,650

LP7901FHU Full Height Pull - Bolts Up 1,982 1,664 1,779

LP7901FHB Full Height Pull - Bolts Up and Down 2,281 1,953 2,089

MegaTek Dummy Pull - RoundDP3301DBD Half Height Pull - Bolts Down 1,517 1,185 1,639 889 951

DP3301DBU Half Height Pull - Bolts Up 1,517 1,185 1,639 889 951

DP3301FHD Full Height Pull - Bolts Down 2,072 1,462 2,237 1,158 1,238

DP3301FHU Full Height Pull - Bolts Up 2,072 1,462 2,237 1,158 1,238

NeoTek with GripZone Dummy Pull - RoundDP3401DBD Half Height Pull - Bolts Down 1,625

DP3401DBU Half Height Pull - Bolts Up 1,625

DP3401FHD Full Height Pull - Bolts Down 2,193

DP3401FHU Full Height Pull - Bolts Up 2,193

GeoMetek Dummy Pull - SquareDP7901DBD Half Height Pull - Bolts Down 1,366 1,065 1,139

DP7901DBU Half Height Pull - Bolts Up 1,366 1,065 1,139

DP7901FHD Full Height Pull - Bolts Down 1,699 1,388 1,486

DP7901FHU Full Height Pull - Bolts Up 1,699 1,388 1,486

• DBD and DBU priced as 51" overall. Add $13/in. over 96" long for full height or 51" long for half height.

NOTE: Square Locking Pulls only available in US10BE, US32, and US32D.

Locking Door Pulls (con’t)

LOC

KIN

G D

OO

R P

ULL

SY

ST

EM

LP7901DBD

LP6

44

0 -

RM

85

1

Locking Door Pull Accessories

Door Pull Accessories

Part Description Stock PC / 10BE 28/628 32D/630 32/629

LPS01 Top Strike - 3⁄4" x 1 1⁄2" x 3" 44 41 74 82

LPS02 Top Strike - w/Rubber Stop - 3⁄4" x 2 1⁄2" x 3" 44 41 74 82

LPS03 Top Strike - Stainless Steel - .050" x 1 1⁄8" x 2 1⁄4" 44 34 38

LPS04 Transom Strike - 1 1⁄4"D x 4 1⁄2"H 142 101 112

LPS05 Transom Strike - 1 1⁄4"SQ x 4 1⁄2"H 165 116 131

LPS06 Mortised Header Strike 2" Dia. 166 117 132

LPS07 Top Inswinging Strike 184 172 193

LPS12 Top Strike - w/Adjustable Stops - 3⁄4" x 1 1⁄2" x 3" 126 90 101

Part Description 3/605 4/606 10/612 10B/613 10BE/BSP 15/619 26D/626 26/625

570 Dust Proof Strike 21.80 20.30 22.70 22.70 36.60 26.50 17.20 21.90

Part Description 3/6054/606

Stock PC10BE 10B/613 32D/630 32/629

DGBKIT Double Glazed Door Bushing Kit for Glass Doors 87 90 94 75 84

NOTE: Thumbturn design differs between the round and square verisons.

NOTE: If the 09 cylinder is specified, an add on charge will be applied.

Order form available for LPS07.

LPS01

570Part Description

3/6054/606

10/61210BL/614

Stock PC 10BE

26/62526D/626 32D/630

RM850 Floor Mounted Stop 1 1⁄2" Projection 27 28 41 20 32

RM851 Floor Mounted Stop 2 1⁄2" Projection 60 67 64 60 52

Part Description 3/6054/606

Stock PC10BE 32D/630

ADA (suffix) ADA Large Thumbturn - 1 13⁄16" Projection 45 43 42

Page 62: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.62

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

FL3

30

1 -

PD

U8

50

0P

AN

IC D

EV

ICE

/ F

LA

T L

AT

CH

Locking Door Pull with Flat Latch

Part Description Stock PC / 10BE 32D/630 32/629

FL3301DBU Half Height Pull - Bolts Up 6,381 4,537 5,218

FL3301FHU Full Height Pull - Bolts Up 6,447 4,855 5,583

Horizontal Push/Pull Bar Option - Half Height - Bolts Up (DBU)

FL3301DBUBEPB Bent End Both Sides 6,697 4,819 5,534

FL3301DBUBEPT Bent End Thumbturn Side - Mating Side Vertical 6,489 4,635 5,326

FL3301DBUBEPC Bent End Cylinder Side - Mating Side Vertical 6,489 4,635 5,326

FL3301DBUPMPB Post Mount Both Sides 6,828 4,936 5,665

FL3301DBUPMPT Post Mount Thumbturn Side - Mating Side Vertical 6,603 4,735 5,440

FL3301DBUPMPC Post Mount Cylinder Side - Mating Side Vertical 6,603 4,735 5,440

Horizontal Push/Pull Bar Option - Full Height - Bolts Up (FHU)

FL3301FHUBEPT Bent End Thumbturn Side - Mating Side Vertical 6,555 4,953 5,691

FL3301FHUBEPC Bent End Cylinder Side - Mating Side Vertical 6,555 4,953 5,691

FL3301FHUPMPT Post Mount Thumbturn Side - Mating Side Vertical 6,669 5,053 5,805

FL3301FHUPMPC Post Mount Cylinder Side - Mating Side Vertical 6,669 5,053 5,805

PDU8500

PDU8500 PDU8500-1 PDU8500-2 PDU8500-3

PDU8500-4 PDU8500-5 PDU8500-6

Panic Device (for Storefront, Wood, and Metal doors)

Part Latches Mating Handle Shape Mating Handle Length Stock PC / 10BE 32D/630 32/629 32/32D

PDU8500 Up None None 5,828 4,971 5,717 5,815

PDU8500-1 Up L-Shape Full 7,416 6,326 7,275 7,402

PDU8500-2 Up L-Shape Half 7,240 6,176 7,102 7,224

PDU8500-3 Up Vertical Full 7,240 6,176 7,102 7,224

PDU8500-4 Up Vertical Half 6,681 5,700 6,554 6,669

PDU8500-5 Up Vertical Short 6,414 5,471 6,292 6,400

PDU8500-6 Up Horizontal Full 6,414 5,471 6,292 6,400

If Vertical CTC is > 70 7/8" or Horizontal CTC is > 33 3/4" there is a $360 add on price. Order Form available for

PDU8500 configurations.

• To meet California Building Code (2013) Sec.11B-309.4 there is a $111.00 add on price.

Page 63: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 63

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

ST

RIK

ES

ES

K-S

GL-

24

D -

ES

-MS

-31

0-1

-1-3

/4-1

2D

-FS

Strikes

Panic Strike Kits (Strike, Shims, Cover) For Stiles 5" or greater, Wood and Hollow Metal Frames.

Part DescriptionKeeperLength Voltage Mode

Stock PC 10BE 32D/630 32/629

ESK-SGL-24D Single Door 3/4" 24V DC Fail Secure 1,286 1,088 1,252

ESK-DBL-24D Double Door 3/4" 24V DC Fail Secure 2,572 2,176 2,503

ESK-SGL-12D Single Door 3/4" 12V DC Fail Secure 1,286 1,088 1,252

ESK-DBL-12D Double Door 3/4" 12V DC Fail Secure 2,572 2,176 2,503

ESK-SGL-24D-FS Single Door 3/4" 24V DC Fail Safe 1,286 1,088 1,252

ESK-DBL-24D-FS Double Door 3/4" 24V DC Fail Safe 2,572 2,176 2,503

ESK-SGL-12D-FS Single Door 3/4" 12V DC Fail Safe 1,286 1,088 1,252

ESK-DBL-12D-FS Double Door 3/4" 12V DC Fail Safe 2,573 2,176 2,503

MSK-SGL Single Door 225 191 219

MSK-DBL Double Door 321 272 313

SL100 Security Latch AdapterSingle Manual Strike 2,402 2,089 2,402

Double Manual Strike 4,803 4,177 4,803

AC-Rectifier AC Converter for Electrc Strike 80

ES-SmartpacIII Power Controller 122

†LCBMA Door Monitioring 163

Medium Stile Panic Strike Kits (Strike, Adapter Plate, Cover) For stiles 3 ½" and less than 5".

ESK-MS-SGL-24D Single Door 3/4" 24V DC Fail Secure 1,479 1,251 1,440

ESK-MS-DBL-24D Double Door 3/4" 24V DC Fail Secure 2,958 2,502 2,878

ESK-MS-SGL-12D Single Door 3/4" 12V DC Fail Secure 1,479 1,251 1,440

ESK-MS-DBL-12D Double Door 3/4" 12V DC Fail Secure 2,958 2,502 2,878

ESK-MS-SGL-24D-FS Single Door 3/4" 24V DC Fail Safe 1,479 1,251 1,440

ESK-MS-DBL-24D-FS Double Door 3/4" 24V DC Fail Safe 2,958 2,502 2,878

ESK-MS-SGL-12D-FS Single Door 3/4" 12V DC Fail Safe 1,479 1,251 1,440

ESK-MS-DBL-12D-FS Double Door 3/4" 12V DC Fail Safe 2,958 2,502 2,878

MSK-MS-DBL Double Door 369 313 360

AC-Rectifier AC Converter for Electrc Strike 80

ES-SmartpacIII Power Controller 122

310-1 Electric Strikes Body Only

Part Description Keeper Length Voltage Mode Price

ES-310-1-3/4-24D Electric Strike 3/4" 24V DC Fail Secure 646

ES-310-1-3/4-12D Electric Strike 3/4" 12V DC Fail Secure 646

ES-310-1-3/4-24D-FS Electric Strike 3/4" 24V DC Fail Safe 646

ES-310-1-3/4-12D-FS Electric Strike 3/4" 12V DC Fail Safe 646

ES-MS-310-1-1-3/4-24D Medium Stile Double Electric Strike 3/4" 24V DC Fail Secure 1,292

ES-MS-310-1-1-3/4-12D Medium Stile Double Electric Strike 3/4" 12V DC Fail Secure 1,292

ES-MS-310-1-1-3/4-24D-FS Medium Stile Double Electric Strike 3/4" 24V DC Fail Safe 1,292

ES-MS-310-1-1-3/4-12D-FS Medium Stile Double Electric Strike 3/4" 12V DC Fail Safe 1,292

†Note: LCBMA is not available on 310-1-1 models or medium stiles.Note: Medium stiles are 3 1/2" - 5". Wide stiles are over 5".MSK-SGL will work on both wide and medium stiles.

Page 64: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.64

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

AR

CH

ITE

CT

UR

AL

FIN

ISH

ES

Most of Rockwood’s products are available in all of the following architectural finishes. The catalog indicates exceptions.

This finish list is grouped by base metal.

Architectural Finishes

Base Metal DescriptionPrice Book Code

Rockwood Code

BHMA Code

Aluminum Satin 27 US27 627

Aluminum Clear Anodized 28 US28 628

Aluminum Light Bronze Anodized 311 311 —

AluminumMedium Bronze Anodized

312 312 —

Aluminum Dark Bronze Anodized 313 313 710

AluminumExtra Dark Bronze Anodized

314 314 —

Aluminum Black Anodized 315 315 711

Aluminum White Powder Coat WPC WPC —

Aluminum Red Powder Coat RPC RPC —

Aluminum Black Powder Coat BPC BPC —

Brass Polished Clear Coated 3 US3 605

Brass Polished No Coating 3NL US3NL —

Brass Satin Clear Coated 4 US4 606

Brass Satin Oxidized Relieved 5 US5 609

BrassSatin Nickel Plated Clear Coated

15 US15 619

BrassSatin Nickel Blackened Relieved Clear Coated

15A US15A 620

BrassFlat Black Powder Coated

19 US19 622

Brass Polished Chrome Plated 26 US26 625

Brass Satin Chrome Plated 26D US26D 626

Bronze* Polished Clear Coated 9 US9 611

Bronze* Satin Clear Coated 10 US10 612

Bronze*Satin Black Oxidized Oil Rubbed

10A US10A 722

Bronze*Satin Oxidized Oil Rubbed

10B US10B 613

Bronze*Satin Oxidized Clear Coated

10BL US10BL 614

Bronze*Dark Oxidized Statuary Clear Coated

20A US20A 624

Stainless Steel Polished 32 US32 629

Stainless Steel Satin 32D US32D 630

Special Finishes (see descriptions)

Stainless Steel Satin MicroShield® Coated 32DMS*** US32DMS*** —

Stainless Steel Polished 316 Alloy 32316*** US32316*** —

Stainless Steel Satin 316 Alloy 32D316*** US32D316*** —

Dark Oxidized Satin Bronze, Equivalent

10BE US10BE (613E)

Black Suede Powder Coat BSP BSP —

White Suede Powder Coat WSP WSP —

Wrought Black Powder Coat WB WB —

32DMS (MicroShield®): As part of its promise to provide

innovative solutions to their customers, ASSA ABLOY

Group companies offer the MicroShield® technology, a

silver-based antimicrobial coating designed to inhibit the

spread of germs and bacteria.

32316 and 32D316 are made from alloy 316 stainless

steel containing molybdenum and extra nickel giving it

substantially higher corrosion resistance than the standard

stainless steels typically used in door hardware. This finish

is ideal for use in coastal, urban, and industrial areas that

have harsh environmental conditions. 32316 (polish)

finishes offer the best corrosion resistance and should be

used in caustic environments.

10BE Dark Oxidized Satin Bronze equivalent: This finish

provides the richness and warmth of the 10B/613 "living"

finish, but maintains its original color and appearance and

will not fade or wear over time. The 10BE finish is offered

by Corbin Russwin, McKinney, Norton, Rixson, Rockwood,

SARGENT and Yale, providing visual consistency between

ASSA ABLOY Group brands.

* On most bronze finishes we will supply solid bronze

material. Where solid bronze material is not available,

we will use brass as a base material with a bronze look

powder coat in its place.

*** Available on select items as indicated by the finish icon

throughout the catalog.

Wood Finishes

Wood Species and Finishes are found on page 39.

Special Finishes Description

MicroShield® is a registered

trademark of Yale Security Inc.,

an ASSA ABLOY Group company.

Page 65: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 65

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

MO

UN

TIN

G T

YP

ES

PULL STYLE PULL ON ONE SIDE OF DOOR PULL ON BOTH SIDES OF DOOR (BTB)

MOUNTING STYLE Thru Bolt Deco Thru Bolt Concealed Conehead/Set Screw Spanner Collar

DOOR TYPE Wood/Metal Glass Metal Metal Wood Wood/Metal Glass Wood/Metal Glass

CONEHEADS NA NA NA Single Single Single Single Single NA NA

MOUNTING TYPE Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14

Standard (STD) Bolt Size

1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20 1⁄4"-20

Price INCL 28.59 33.78 8.49 13.39 11.12 8.49 15.65

Heavy Duty (HD) Bolt Size

5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18 5⁄16"-18

Price 8.49 33.78 40.03 12.65 18.95 15.55 12.65 19.81

Extra Heavy Duty (XHD) Bolt Size

3⁄8"-16 3⁄8"-16 3⁄8"-16 3⁄8"-16 3⁄8"-16

Price 12.42 36.90 43.15 32.23 38.46

Straight Pulls

Pull Type Dia.

MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED

Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14

Straight 5⁄8" 8-32 STD STD 8-32 8-32 8-32 STD

Straight 3⁄4" HD HD HD STD STD STD STD

Straight 1" HD HD HD HD HD HD HD HD HD HD

Straight 1 1⁄4" HD HD HD HD HD HD HD HD HD HD

Straight 1 1⁄2" HD HD HD HD HD HD HD HD HD HD

Offset Pulls - Postmount

Pull Type Dia.

MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED

Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14

Offset 5⁄8" 8-32 8-32 8-32 8-32 8-32 8-32 8-32 8-32

Offset 1" HD HD HD HD HD HD HD HD

Offset 1 1⁄4" HD HD HD HD HD HD HD HD

Offset 1 1⁄2" HD HD HD HD HD HD HD HD

Offset Pulls - Tubular Bent Ends

Pull Type Dia.

MAXIMUM BOLT SIZE ALLOWED MAXIMUM BOLT SIZE ALLOWED

Type 1 Type 12 Type 15 Type 6 Type 6R Type 8 Type 5 Type 13 Type 11 Type 14

Offset 1" XHD XHD XHD HD HD HD XHD XHD

Offset 1 1⁄4" XHD XHD XHD HD HD HD XHD XHD

Offset 1 1⁄2" XHD XHD XHD HD HD HD XHD XHD

Mounting Types

For all bent 1 1/4" - 1 1/2" solid Aluminums pulls and bars us the following mountings: (1HD - 12HD -6HD -8HD - 5HD - 15HD - 13HD)

Page 66: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.66

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

MO

UN

TIN

G D

ET

AIL

S

Door Pull Mounting Details

Free End

Thru Bolt

TYPE 1 - Thru BoltWood or Metal Door

Pull

Outside Flat HeadMachine Screw

Inside

FinishWasher

Type Bolt Size Drill Size Price1/4"-20

5/16"-183/8"-16

9/32

11/32

13/32

1

1HD

1XHD

Incl.

8.49

12.42

Type Bolt Size Drill Size Price1/4"-20

5/16"-183/8"-16

9/32

11/32

13/32

12

12HD

12XHD

28.59

33.78

36.90

TYPE 12 - Decorative Thru BoltWood or Metal Door

Pull

Thru Bolt

Type Bolt Size Drill Size Price1/4"-20

5/16"-183/8"-16

15

15HD

15XHD

33.78

40.03

43.15

TYPE 15 - Decorative Thru BoltGlass Door

PullThru Bolt

NeopreneBushing5/8" Dia. Hole

Plastic Washers

5/8

5/8

5/8

Free End

Concealed

Type Bolt Size Drill Size Price1/4"-205/16"-18

1/4-20 Tap5/16-18 Tap

6

6HD

8.49

12.65

TYPE 6 - Surface ConcealedMetal Door

Minimum diameter of pull is 5/8"

Pull

Reinforcement by others

Cone HeadMachine Screw

SetScrew

For doors with

rivnuts specify

Type 6R

Type Bolt Size Drill Size Price1/4"-20

5/16"-18

N/A

N/A

6

6HD

13.39

18.95

TYPE 6R - Surface ConcealedMetal Door

Minimum diameter of pull is 1"

Pull

Rivnut

SetScrew

Cone HeadMachine Screw

Type Bolt Size Drill Size Price1/4"-20

5/16"-18

23/64 - 9/16 dp.7/16 - 9/16 dp.

8

8HD

11.12

15.55

TYPE 8 - Surface ConcealedWood Door

Pull

1/4"-20Set Screw

Cone HeadMachine Screw

KnifeThreadInsert

Type Bolt Size Drill Size Price1/4"-20

5/16"-18

5/8

5/8

13

13HD

15.65

19.81

TYPE 13 - Back-to-BackGlass Door

Washer

Pull

PlasticWashers

Pull

NeopreneBushing5/8" Dia. Hole

SetScrew

OutsideInside

Cone HeadMachine Screw

TYPE 11XHD - Back-to-Backw/Spanner Collar - Wood or Metal Door

SpannerCollar

Pull

RH Thread

Pull

Minimum diameter of pull is 1"

OutsideInside

Type Bolt Size Drill Size Price3/8"-16 13/3211XHD 32.23

Type Bolt Size Drill Size Price1/4"-20

5/16"-18

9/32

11/32

5

5HD

8.49

12.65

TYPE 5 - Back-to-BackWood or Metal Door

PullPull

SetScrew

Minimum diameter of pull is 5/8"

OutsideInside

Cone HeadMachine Screw

RM4800 Series - Thru BoltWood or Metal Door

Screw Post

Pull

Bolt Size Drill Size3/8"-16

Price

42.335/8

RM4800 Series - Back-to-BackWood or Metal Door

Pull

Screw Post

Pull

Bolt Size Drill Size3/8"-16

Price

42.335/8

TYPE 14XHD - Back-to-BackGlass Door

Minimum diameter of pull is 1"

Spanner Collar

Pull

RH/LH ThreadFeltWashers

Pull

NeopreneBushing5/8" Dia. Hole

Type Bolt Size Drill Size Price3/8"-16 5/814XHD 38.46

Back-to-Back

RM4800

Mounting

Only

RM790 x

RM790 BTB

Mounting

Only

HD mountings feature 2 set screws 180° apart.

Flat HeadMachineScrew

Flat HeadMachineScrew

Sleeve

PullPull

TYPE 10 - Surface MountedWood or Metal Door

Type Bolt Size Drill Size Price#8-32 9/3210 15.55

Page 67: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 67

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

PU

SH

AN

D P

ULL

BA

R M

OU

NT

ING

DE

TA

ILS

Push and Pull Bar Mounting Details

Sizing of Push Bars

Flush DoorsDoor width: • minus 5" for bent end bars

• minus 5" for flat end post mount bars • minus 7" for round end post mount bars

Stile and Rail Doors or Doors with LitesDoor width: • minus width of one stile

CAUTION: Always confirm bars will not interfere with jamb or cause pinching hazard.

CAUTION: On narrow stile doors, be sure push bar base fits on the stile and bar does not interfere with the stop.

Handing of Doors

The handing of a door is determined from the outside of the opening.

Standing outside the door:

• If the hinges are on the right, it is a right hand door.

• If the hinges are on the left, it is a left hand door.

• If the door opens away from you, it is a regular bevel door.

• If the door opens toward you, it is a reverse bevel door.

CL CL

CL

Push Bar

Finished Floor

42"

Recommended

Mounting

Location

Left Hand Right Hand

Inside

Outside

Inside

Outside

Left Hand

Reverse Bevel

Right Hand

Reverse Bevel

Free End

Free

End

Common End

Common End

47 Bar

Typical Mounting

Page 68: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.68

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

FAS

TE

NE

RS

- S

PA

RE

PA

RT

SS

P1

00

4 -

SP

10

79

Part Description Mounting Type Price

SP1004 1⁄4 "-20 x 2 1⁄4 " Flat Head Machine Screw Thru Bolt 1 1.26

SP1005 1⁄4 "-20 Finishing Washer 1 0.89

SP10535⁄16 "-18 x 2 1⁄2" Socket Flat Head Machine Screw

Thru Bolt1HD 3.43

SP1054 5⁄16 "-18 Finishing Washer 1HD 1.27

SP10013⁄8 "-16 x 2 1⁄2" Socket Flat Head Machine Screw

Thru Bolt1XHD 5.31

SP1002 3⁄8 "-16 Finishing Washer 1XHD 1.59

SP10031" Diameter Decorative Thru Bolt 1⁄4 "-20 x 2 1⁄4 "

12 14.37

SP10551" Diameter Decorative Thru Bolt 5⁄16 "-18 x 2 1⁄4 "

12HD 17.12

SP10411 1⁄4 " Diameter Decorative Thru Bolt3⁄8 "-16 x 2 1⁄4 "

12XHD 17.12

Thru Bolt Mounting - for 1 3⁄4" Wood and Metal Doors

Part Description Mounting Type Price

SP1025 1⁄4 "-20 x 2 1⁄4 " Cone Head Machine Screw 5 3.73

SP1056 5⁄16 "-18 x 2 1⁄4 " Cone Head Machine Screw 5HD 5.90

SP10521⁄4 "-20 x 2 1⁄4 " Double Cone Head Machine Screw

(for use with offset pulls)16 4.42

SP10575⁄16 "-18 x 2 1⁄4 " Double Cone Head Machine Screw

(for use with offset pulls)16HD 7.26

SP10271⁄4 "-20 Cone Head Union (Used to Convert Cone

Head to Thru Bolt Hole)N/A 3.73

SP10791⁄4 "-20 Double Cone Head Union (Used to

Convert Double Cone Head to Thru Bolt Hole)N/A 6.58

SP10685⁄16 "-18 Cone Head Union (Used to Convert Cone

Head to Thru Bolt Hole)N/A 5.90

SP1026 1⁄4 "-20 x 5⁄16 " Set Screws (Standard) N/A 0.89

SP1065 1⁄4 "-20 x 3⁄16" Set Screw (Short) N/A 1.16

SP1032 3⁄8"-16 x 3 1⁄2" LH/RH Bolt 11 7.79

SP1071 Spanner Collar 1" Diameter for LH/RH Bolt 11 11.78

SP1033 Spanner Collar 1 1⁄4 " Diameter for LH/RH Bolt 11 11.78

SP1072 Spanner Collar 1 1⁄2" Diameter for LH/RH Bolt 11 13.11

Back to Back Mounting - for 1 3⁄4" Wood and Metal Doors

Page 69: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 69

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

FAS

TE

NE

RS

- S

PA

RE

PA

RT

SS

P1

02

0 -

SP

10

82

Part Description Mounting Type Price

SP1039 1⁄4 "-20 x 1⁄2" Cone Head Machine Screw 6 / 6R 3.73

SP1058 5⁄16 "-18 x 1⁄2" Cone Head Machine Screw 6HD 5.90

SP1080 1⁄4 "-20 Cone Head / Knife Thread Insert 8 6.21

SP1082 5⁄16 "-18 Cone Head / Knife Thread Insert 8HD 6.21

SP1051 1⁄4 "-20 x 1⁄2" Double Cone Head Machine Screw 17 / 17R 5.90

SP1059 5⁄16 "-18 x 1⁄2" Double Cone Head Machine Screw 17HD 7.26

Concealed Mounting - for 1 3⁄4" Wood and Metal Doors

Part Description Mounting Type Price

SP1022Stainless Steel Washer for 1⁄4 "-20 Cone Head Machine

Screw .032" Thick13 1.59

SP1060Stainless Steel Washer for 5⁄16 "-18 Cone Head Machine

Screw .060" Thick13HD 1.59

SP1023 Plastic Washer for 1⁄4 "-20 Bolt; Specify Size 13 1.37

SP1061 Plastic Washer for 5⁄16 "-18 Bolt; Specify Size 13HD 1.47

SP1062 Plastic Washer for 3⁄8 "-16 Bolt; Specify Size 14 1.47

SP1024 Glass Door Bushing for 5⁄8" Hole in Glass; Specify Size 13 / 13HD / 14 1.59

Bushings & Washers - for 1⁄2" Glass Doors

Part Description Mounting Type Price

SP1020 1" Diameter Decorative Thru Bolt; 1⁄4 "-20 x 1 1⁄8" 15 14.37

SP1063 1" Diameter Decorative Thru Bolt; 5⁄16"-18 x 1 1⁄8" 15HD 17.12

SP1040 1 1⁄4 " Diameter Decorative Thru Bolt; 3⁄8 "-16 x 1 1⁄8" 15XHD 17.12

Thru Bolt Mounting - for 1⁄2" Glass Doors

Page 70: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.70

ROCKWOOD

USA & Canada Prices Effective May 1, 2021

USA: 800-458-2424 | www.assaabloydooraccessories.us Check the websites for the most updated product information.Canada: 800-461-3007 | www.assaabloydss.ca

SP

10

06

- S

P1

07

7FA

ST

EN

ER

S -

SP

AR

E P

AR

TS

Part Description Mounting Type Price

SP1021 1⁄4 "-20 x 1 1⁄8" Cone Head Machine Screw 13 3.73

SP1064 5⁄16 "-18 x 1 1⁄8" Cone Head Machine Screw 13HD 5.90

SP1067 1⁄4 "-20 x 1 1⁄8" Double Cone Head Machine Screw 18 5.90

SP1066 5⁄16 "-18 x 1 1⁄8" Double Cone Head Machine Screw 18HD 7.26

SP1026 1⁄4 "-20 x 5⁄16" Set Screw (Standard) N/A 0.89

SP1065 1⁄4 "-20 x 3⁄16" Set Screw (Short) N/A 1.16

SP10313⁄8"-16 x 1 3⁄4" LH/RH Bolt (If SP1031 is ordered

and KIT 14 is not called out fastener will be 2 1/4")14 7.79

SP1071 Spanner Collar 1" Diameter for LH/RH Bolt 14 11.78

SP1033 Spanner Collar 1 1⁄4" Diameter for LH/RH Bolt 14 11.78

SP1072 Spanner Collar 1 1⁄2" Diameter for LH/RH Bolt 14 13.11

Back to Back Mounting - for 1⁄2" Glass Doors

Part Description For Use With Price

SP1073 1⁄8" Thick x 1 1⁄16" Diameter 3⁄4" Diameter Pulls 14.37

SP1074 1⁄8" Thick x 1 1⁄4" Diameter1" Diameter Pulls

and Posts14.37

SP1075 1⁄8" Thick x 1 1⁄2" Diameter1" Diameter Pulls

and Posts14.37

SP1076 1⁄8" Thick x 1 3⁄4" Diameter1" Diameter Pulls

and Posts14.37

SP1077 1⁄8" Thick x 2" Diameter1" Diameter Pulls

and Posts14.37

Y Base PlatesSpecify bolt hole size and finish. Standard pulls require two plates.

Part Description Door Type Price

SP1006 #8 x 3⁄4" Oval Head Sheet Metal Screw Wood or Metal 0.68

SP1007 #8-32 x 3⁄4" Oval Head Machine Screw Metal 0.68

SP1034 #8-32 x 1 5⁄8" Brass Sleeve Machine Screw Wood or Metal 3.96

Flush Pull Fasteners

Page 71: Architectural Door Accessories - IDN Inc

ROCKWOOD

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 71

USA & Canada Prices Effective May 1, 2021

Check the websites for the most updated product information. USA: 800-458-2424 | www.assaabloydooraccessories.us

Canada: 800-461-3007 | www.assaabloydss.ca

MO

UN

TIN

G K

ITS

KIT

1 -

KIT

RM

38

0G

Standard Thru Bolt for

Countersunk Holes

Decorative Thru Bolt for

Wood or Metal Doors

Cone Head Bolt for Back-to-Back

Wood or Metal Doors

LH/RH Bolt without Heads

LengthLengthLengthLength

PartMounting

Type Description Price

KIT1 12 ea. 1⁄4 "-20 x 2 1⁄4" Thru Bolts and 2 ea. Finish Washers; Specify Finish 4.25

KIT1HD 1HD2 ea. 5⁄16 "-18 x 2 1⁄2" Thru Bolts and 2 ea. Finish Washers; Specify Finish 8.49

KIT1XHD 1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru Bolts and 2 ea. Finish Washers; Specify Finish 12.42

KIT5 52 ea. 1⁄4 "-20 x 2 1⁄4" Cone Head Bolts and 4 ea. Set Screws 8.49

KIT5HD 5HD2 ea. 5⁄16 "-18 x 2 1⁄4" Cone Head Bolts and 4 ea. Set Screws 12.65

KIT6 62 ea. 1⁄4 "-20 x 1⁄2" Cone Head Bolts and 4 ea. Set Screws 8.49

KIT6HD 6HD2 ea. 5⁄16 "-18 x 1⁄2" Cone Head Bolts and 4 ea. Set Screws 12.65

KIT11 112 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt and 2 ea. Spanner Collars for 1 3⁄4" Doors; Specify Pull Diameter and Finish

32.23

KIT12-1 122 ea. 1⁄4 "-20 x 2 1⁄4" Decorative Thru Bolts; 1" Dia.; Specify Finish 28.59

KIT12-1HD

12HD2 ea. 5⁄16 "-18 x 2 1⁄4" Decorative Thru Bolts; 1" Dia.; Specify Finish 33.78

KIT12-1.25XHD

12XHD2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts; 1 1⁄4" Dia.; Specify Finish

36.90

KIT13 13

2 ea. 1⁄4 -20 x 1 1⁄8" Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; 4 ea. Set Screws; Specify if other than 1⁄2" Glass

15.65

KIT13HD 13HD

2 ea. 5⁄16 "-18 x 1 1⁄8" Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; 4 ea. Set Screws; Specify if other than 1⁄2" Glass

19.81

KIT14 142 ea. 3⁄8 "-16 x 2 1⁄4" LH/RH Bolt; 2 ea. Spanner Collars; 2 ea. Bushings; 4 ea. Washers for 1⁄2" Glass Doors; Specify Pull Diameter and Finish

38.46

KIT15 152 ea. 1⁄4 "-20 x 1 1⁄8" Decorative Thru Bolts; 1" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size

33.78

KIT15HD 15HD2 ea. 5⁄16 -18 x 1 1⁄8" Decorative Thru Bolts; 1" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size

40.03

KIT15-1.25XHD

15XHD2 ea. 3⁄8 -16 x 11⁄8" Decorative Thru Bolts; 1 1⁄4" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size

43.15

KIT15-1.5XHD

15XHD2 ea. 3⁄8 "-16 x 1 1⁄8" Decorative Thru Bolts; 1 1⁄2" Dia.; 2 ea. Bushings; 4 ea. Plastic Washers; Specify Finish and Glass Thickness/Hole Size

49.37

KIT16 162 ea. 1⁄4 "-20 x 2 1⁄4" Double Cone Head Bolts and 4 ea. Set Screws

12.65

KIT16HD 16HD2 ea. 5⁄16 "-18 x 2 1⁄4" Double Cone Head Bolts and 4 ea. Set Screws 15.65

PartMounting

Type Description Price

KIT17 172 ea. 1⁄4 "-20 x 1⁄2" Double Cone Head Bolts and 4 ea. Set Screws 12.65

KIT17HD 17HD2 ea. 5⁄16 "-18 x 1⁄2" Double Cone Head Bolts and 4 ea. Set Screws 15.65

KIT18 18

2 ea. 1⁄4 "-20 x 1 1⁄8" Double Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; Specify if other than 1⁄2" Glass and 4 ea. Set Screws

21.67

KIT18HD 18HD

2 ea. 5⁄16 "-18 x 1 1⁄8" Double Cone Head Bolts; 2 ea. Metal Washers; 4 ea. Plastic Washers; 2 ea. Bushings for 1⁄2" Glass Doors; Specify if other than 1⁄2" Glass and 4 ea. Set Screws

24.78

KIT-T1 T1

1 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 1 ea. 1⁄4 "-20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4 "-20 x 2 1⁄4" — 1" Dia. Decorative Thru Bolts; Specify Finish

36.89

KIT-T2 T2

1 ea. 1⁄4 "-20 X 1 1⁄8" Cone Head Bolt; 1 ea. 1⁄4 "-20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4 "-20 x 1 1⁄8" — 1" Dia. Decorative Thru Bolts; 1 ea. Metal Washer; 6 ea. Plastic Washers; 3 ea. Bushings; Specify Finish

46.26

KIT-T3 T3

1 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 1 ea. 1⁄"4 -20 Cone Head Union; 2 ea. Set Screws; 2 ea. 1⁄4"-20 x 2 1⁄4" Thru Bolts; 2 ea. Finish Washers; Specify Finish

12.63

KIT-T4 T41 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 2 ea. 1⁄4 "-20 x 1⁄2" Cone Head Bolts; 3 ea. Set Screws

12.63

KIT-T5 T51 ea. 1⁄4 "-20 X 2 1⁄4" Cone Head Bolt; 2 ea. 1⁄4 "-20 x 1⁄2" Cone Head Wood Screws; 3 ea. Set Screws

12.63

KITRM1.25 11x1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru-Bolts; 2 ea. Finish Washers; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; Specify Finish

28.59

KITRM36011x

12XHD

2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄4" Dia.; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; Specify Finish

53.01

KITRM360G14x

15XHD

2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄4" Dia.; 1 ea. 3⁄8 "-16 x 2 1⁄4" LH/RH Bolt; 1 ea. 1 1⁄4" Spanner Collar; 3 ea. Bushings; 6 ea. Plastic Washers; Specify Finish

62.38

KITRM1.5 11x1XHD2 ea. 3⁄8 "-16 x 2 1⁄2" Thru Bolts; 2 ea. Finish Washers; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; Specify Finish

31.70

KITRM38011x

12XHD

2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄2" Dia.; 1 ea. 3⁄8 "-16 x 3 1⁄2" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; Specify Finish

62.38

KITRM380G14x

15XHD

2 ea. 3⁄8 "-16 x 2 1⁄4" Decorative Thru Bolts 1 1⁄2" Dia.; 1 ea. 3⁄8 "-16 x 1 1⁄4" LH/RH Bolt; 1 ea. 1 1⁄2" Spanner Collar; 3 ea. Bushings; 6 ea. Plastic Washers; Specify Finish

71.73

Mounting Kits for Door Pulls

Page 72: Architectural Door Accessories - IDN Inc

Copyright © 2020-2021, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 30006A 3/21

(In Canada)

Door Security Solutions Canada

160 Four Valley Drive

Vaughan, ON L4K 4T9

P: 800-461-3007

www.assaabloydss.ca

The ASSA ABLOY Group is the global leader

in access solutions. Every day we help

people feel safe, secure and experience

a more open world.

ASSA ABLOY Opening Solutions

Architectural Accessories Group

Rockwood, PA

P: 800-458-2424 • F: 800-922-9212

www.assaabloydooraccessories.us