Arch3590 sp13 cnc_toolpath_study_sample
3
ARCH3590 Intro to CNC: Initial Surface Analysis to Determine Machinability DRAFT ANGLE ANALYSIS MINIMUM CURVATURE RADIUS ANALYSIS DESIGN SURFACE <INSERT ANALYSIS COLOR KEY HERE> <INSERT ANALYSIS COLOR KEY HERE>
description
Sample CNC toolpath study as part of an introduction to RhinoCAM assignment in our Introduction to Computation + Fabrication seminar at City Tech (CUNY).
Transcript of Arch3590 sp13 cnc_toolpath_study_sample
ARCH3590 Intro to CNC: Initial Surface Analysis to Determine Machinability
DRAFT ANGLE ANALYSIS MINIMUM CURVATURE RADIUSANALYSISDESIGN SURFACE
<INSERT ANALYSIS COLOR KEY HERE> <INSERT ANALYSIS COLOR KEY HERE>
75% of Tool Diameter
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ARCH3590 Intro to CNC: Finish Toolpath Settings Studies3/
8” B
all
1/4”
Bal
l1/
8” B
all
50% of Tool Diameter 25% of Tool Diameter
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
ESTIMATED MACHINE TIME: XXX MINUTESCRASH: Y/N
<INSERT ANALYSIS COLOR KEY HERE>
ARCH3590 Intro to CNC: Optimized Finishing Strategy (Resolution vs. Time)
VALLEY REMACHINE TOOLPATHTOOL:
STEPOVER:TIME:
OPTIMIZED STOCK RESULTPARALLEL FINISH TOOLPATHTOOL:
STEPOVER:TIME:
