Arc Welding Simulator Part 3 of 3
4
ARC WELDING SIMULATOR The Simulator Includes: Computer and Printer; Software; Low-Amperage Welding Source; Welded Joint mock – up; Welder helmet with built in head phones; Hand tool mock up.
-
Upload
teamforiti -
Category
Technology
-
view
2.177 -
download
2
description
Ashok Kalbag, Secretary General, PanIIT India has proposed a demo of this technology, that has the potential to reduce the cost and speed up training of welders.
Transcript of Arc Welding Simulator Part 3 of 3
ARC WELDING SIMULATOR
The Simulator Includes: Computer and Printer; Software; Low-Amperage Welding Source; Welded Joint mock – up; Welder helmet with built in head
phones; Hand tool mock up.
ARC WELDING SIMULATOR
The Simulator allows the following welding parameters to be simulated and monitored.
Arc Gap Length, mm 1 to 8
Arc voltage, V 5 to 45
Welding Current, A 5 ± 0.5
Welding Speed, mm/s 2 to 12
Electrode Melting rate, cm/min 15 to 45
Heat Input, J Up to 200
Electrode Inclination Angle, Degree
Up to 15
Training Session, Duration, Minutes
Up to 10
Weld Length, cm 30
Thank You