Approved Colour Scheme Matrix - Falls Creek, Victoria › wp-content › uploads › sites › 55...
Transcript of Approved Colour Scheme Matrix - Falls Creek, Victoria › wp-content › uploads › sites › 55...
Pro
fess
iona
l Pai
nt S
pec
ific
atio
n
1800 033 431 | [email protected] haymespaint.com.au
Client Details:
Project Address:
Specification No:
Date Prepared:
Approved Colour Scheme Matrix“We never take shortcuts on Quality”
— David Haymes
Prepared By:
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Introduction As a local Victorian manufacturer, Haymes Paint immensely appreciate the opportunity to support the Falls Creek Resort Management team and their respective stakeholders.
Please find our recommendations that are in keeping with various matches proposed from the Dulux Atlas.
We have rationalised the suggestions based on tonal shifts in grey whilst highlighting the distinct undertones that were evident in the Atlas recommendations and perform on the same level of chroma and saturations.
Haymes Paint recommend the schematic is utilised where base undertone preferences are desired in order to compliment the colour in different graduations. A consequence of this proposal results in tonal shifts and variances that are easier to notice, understand and define.
We are also pleased to amend the project in line with client preferences and review any proposed colour applications, or use of accent hues in accordance with the preferred neutral selections, as documented within this colour scheme matrix.
Reference materials to accompany the nominated colours include the Haymes Paint Fan Deck and Haymes website: https://www.haymespaint.com.au/explore-colours/
When you specify Haymes Paint, you are supporting over 400 Australian families, including many independent paint specialists and hardware stores who stock and sell Australia’s largest remaining 100% Australian Made and Family Owned manufactured paint.
Your support truly matters, again, thank you.
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Blue Toned Greys
Haymes Fan Deck Page
Colour Name Image Light Reflective Value
(LFV) Option 1
126 Nantucket
32
126 Sonara Sea
19
126 Eclipse
13
126 Coal mine
6
Option 2
128 Monday
33
128 Venetian
21
128 Abyss
16
128 Black Hills
5
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Dark Greys
Haymes Fan Deck Page Colour Name Image Light Reflective Value
(LRV)
121 City Stone
35
121 Boulder Grey
24
121 Chimney Ash
15
121 Gunpowder Smoke
11
Red Toned Greys
Haymes Fan Deck Page Colour Name Image Light Reflective Value
(LRV)
26 Weathered
43
26 Stony Creek
28
26 Tundra Earth
13
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Brown Toned Greys
Haymes Fan Deck Page
Colour Name Image Light Reflective Value
(LRV)
124 Dark Cloud
29
124 Storm
18
124 Pilgrims Hat
13
124 Medieval
7
Black/Charcoal
Haymes Fan Deck Page Colour Name Image Light Reflective Value
(LRV)
120 Enigma
7
120 Intrigue
4
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Reds/Red Wine
Haymes Fan Deck Page Colour Name Image Light Reflective Value
(LRV)
71 Charred Eggplant
8
71 Berry Crush
9
65 Beach Rose
16
65 Hemlock Rose
21
70 Deep Claret
8
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Colorbond Colours
Haymes Fan Deck Page Colour Name Image Light Reflective Value
(LRV)
N/A Woodland Grey
12
N/A Bushland
25
N/A Loft
9
N/A Monument
8
N/A Deep Ocean
10
N/A Iron Stone
10
N/A Windspray
27
haymespaint.com.au Australia’s first family of paint. SINCE 1935
Reference Guide Below we have listed our proposed closest matches to the previous colour scheme matrix provided from the Dulux offer in the Atlas. Please note: Some colours are very similar and repeat, as the Haymes equivalent may cover 2 or 3 more shades offered in the Atlas as our step up/down in colour graduations pertain directly to our own colour system, which is customised to offer a broad range of colour and not minor shifts in tone either side of a hue. This works more vertically than horizontally, as illustrated when showcased in our fan deck. Direct match list (or nearest available)
P.G1 PG1.H5 to PG1.A9 (any colour below the 5 line)
P.G2 PG2.A5 to PG2.H9 (any colour below the 5 line)
As per below:
P.03 P03.A4 - Dark Cloud, P03.B4 - Stony Creek
P03.A5 - Dark Cloud or Storm, P03.B5 - Stony Creek
P03.A6 - Storm, P03.B6 - Stony Creek, P03.C6 - Stony Creek
P03.A7 - Pilgrims Hat, P03.B7 - Tundra Earth, P03.C7 - Tundra Earth
P03.A8 - Berry Crush, P03.B8 - Berry Crush, P03.C8 - Berry Crush, P03.D8 - Berry Crush
P03.A9 - Deep Claret, P03.B9 - Medieval, P03.C9 - Charred Eggplant, P03.D8 - Berry Crush
P04.A4 - Dark Cloud, P04.B4 - Stony Creek
P04.A5 - Dark Cloud, P04.B5 - Stony Creek
P04.A6 - Storm, P04.B6 - Stony Creek, P04.C6 - Stony Creek
P04.A7 - Pilgrims Hat, P04.B7 - Tundra Earth, P04.C7 - Tundra Earth
P04.A8 - Pilgrims Hat, P04.B8 - Berry Crush P04.C8 - Berry Crush, P04.D8 - Berry Crush
P04.A9 - Enigma or Element, P04.B9 - Medieval, P04.C9 - Charred Eggplant,
P04.D8 - Charred Eggplant
Application properties
SOLASHIELD
Ultra Premium Solashield ExteriorHaymes Solashield anti-ageing Surface Lock Technology ensures your home will stay looking good for longer. With superior adhesion and flexibility, the self-priming interlocking barrier coating actively repels mould, dust and dirt. Delivering a long lasting finish, Haymes Solashield provides the ultimate UV defence for all Australian weather conditions.
Haymes Solashield is suitable for use on exterior timber, weatherboards, pergolas, outdoor furniture, masonry, fibro, render, brick, stone, concrete, galvanised iron, Zincalume ®, PVC, Colorbond® and roofing.
EXTERIOR
Uses
KEY FEATURES AND BENEFITS
MATTVOC 44g/L Film Properties Wet 62um Dry 23um Certifications APAS 0280/3
LOW SHEENVOC 48g/L Film Properties Wet 63um Dry 25um Certifications APAS 0280/5
SATINVOC 54g/L Film Properties Wet 63um Dry 24um Certifications APAS 0280/2
GLOSSVOC 66g/L Film Properties Wet 63um Dry 24um Certifications APAS 0280/4
Gloss shown at 20 degree angle.
GLOSS LEVEL INDICATOR *levels shown at 60 degree angle.
BRUSH ROLLER SPRAY RE-COAT 2 HRS
WATER WASH-UP
COVERAGE UP TO 16m2/L
TOUCH DRY 20 MINS
APPLICATIONS MATT LOW SHEEN SATIN GLOSS
Weatherboards & Exterior Timber & Zincalume®
Pergolas, PVC, Wrought Iron
Masonry & Brick
Stone, Fibro
Concrete
Steel
Galvanised Iron
REPELS DIRT AND MOULD Anti-ageing interlocking barrier.
ULTIMATE UV DEFENCE Reflects UV to protect against degradation.
SELF-PRIMING Superior surface adhesion locks on to last longer.
SALT RESISTANT Reduces salt formation to prevent coating degradation.
20 YEARS GUARANTEED Protection against peeling, flaking and blistering.
haymespaint.com.au
EXPRESSIONS CEILING WHITE
Ultra Premium Expressions Ceiling WhiteHaymes Expressions Ceiling White is a 99% VOC free with no fumes or odours, the ultra-flat smooth finish provides superb coverage and excellent hiding power whilst minimising light reflection to hide surface imperfections.
Suitable for use on interior ceilings including living areas, hallways and bedrooms.
*Pine lining must be primed with an oil based primer, spot prime knots with an oil based primer then full coat the ceiling with the oil based primer prior totop-coating.
Uses
KEY FEATURES AND BENEFITS
CEILING WHITEVOC <1g/L Film Properties Wet 63um Dry 21um Certifications APAS 0215/5 & 0260/5
Application properties
GLOSS LEVEL INDICATOR *Gloss levels shown at 60 degree angle.
BRUSH ROLLER SPRAY RE-COAT 2 HRS
WATER WASH-UP
COVERAGE UP TO 16m2/L
LOW VOC
TOUCH DRY 20 MINS
INTERIOR
FAMILY FRIENDLY - NO FUMES OR ODOURS A healthier home with no lingering odour.
SUPERB COVERAGE Easy to apply with a solid block out.
TINTABLE TRUE WHITE A bright white which maintains superb coverage.
SMOOTH ULTRA-FLAT FINISH Hides surface imperfections.
APPLICATIONS CEILING WHITE
Masonry and Cement Sheet
Paperfaced Plasterboard
Previously Painted Ceiling
Concrete
haymespaint.com.au
Application properties
EXPRESSIONS INTERIOR
Ultra Premium Expressions InteriorHaymes Expressions is an ultra-premium interior coating that delivers impressive long-lasting protection. With exceptional coverage and hiding power, Expressions has superior washability - marks can be easily washedoff without leaving a trace. The highly durable, low odour, stain-resistant formulation is complimented with a 7 year mould and mildew protection guarantee making it ideal for wet areas such as kitchens and bathrooms.
Suitable for use on interior plasterboard, timber, masonry, and pre-painted surfaces.
INTERIOR
Uses
KEY FEATURES AND BENEFITS
MATTVOC <1g/L Film Properties Wet 62um Dry 24um Certifications APAS: 0260/4 & 0215/4
LOW SHEENVOC <1g/L Film Properties Wet 62um Dry 25um Certifications APAS: 0260/3 & 0215/3
SEMI GLOSSVOC <5g/L Film Properties Wet 62um Dry 24um Certifications APAS: 0260/2 & 0215/2
GLOSS LEVEL INDICATOR *Gloss levels shown at 60 degree angle.
BRUSH ROLLER SPRAY RE-COAT 2 HRS
WATER WASH-UP
COVERAGE UP TO 16m2/L
LOW VOC
TOUCH DRY 20 MINS
APPLICATIONS MATT LOW SHEEN SEMI GLOSS
Living Areas
Hallways
Kitchen, Bathroom & Laundry
Offices
School Classrooms & Health Care
Accommodation
STAINPROOF BARRIERResists stains, allowing easy wash off.
NO LINGERING ODOURSA healthier home with no lingering odour.
SUPERIOR WASHABILITYMaintains a long-lasting fresh look.
EXCEPTIONAL COVERAGEEasy to apply with a solid block out.
7 YEAR MOULD & MILDEW PROTECTION GUARANTEE Ideal for kitchens and bathrooms.
haymespaint.com.au
Application properties
ULTRATRIM ACRYLIC ENAMEL
Ultra Premium Ultratrim Acrylic EnamelUltratrim Acrylic Enamel is a low-odour, fast drying trim paint with unique water based technology that provides a tough, durable enamel coating. It is simple to use, hard wearing, non-chipping and non-yellowing formula with a quick 2 hour recoat. The excellent flow and levelling ensure a smooth finish that is easy to clean. Ultratrim Acrylic Enamel can be used for Interior and Exterior surfaces providing a long lasting finish that has the convenience of water wash up.
Ultratrim is suitable to use on areas including skirting boards, architraves, windows, doors, furniture and contact areas where a hard wearing finish is required. Typical substrates include timber, MDF, galvanised iron and Zincalume®.
INTERIOR/EXTERIOR
Uses
KEY FEATURES AND BENEFITS
SEMI GLOSSVOC 49g/L Film Properties Wet 62um Dry 22um Certifications APAS 0260/2
GLOSSVOC 55g/L Film Properties Wet 62um Dry 22um Certifications APAS 0260/1
GLOSS LEVEL INDICATOR *Gloss levels shown at 60 degree angle.
BRUSH ROLLER SPRAY RE-COAT 2 HRS
WATER WASH-UP
COVERAGE UP TO 16m2/L
TOUCH DRY 20 MINS
APPLICATIONS SEMI GLOSS GLOSS
Skirting Boards
Architraves
Windows
Doors
Furniture
High Traffic Areas
FAST DRYING Quick 2 hour Recoat.
NO LINGERING ODOUR A healthier home with no lingering odour.
TOUGH, DURABLE FINISH A hardwearing, non-chip finish.
NON-YELLOWING No yellowing of paint colour over time.
FANTASTIC WASHABILITY Maintains a long-lasting fresh look.
haymespaint.com.au