Application of Wind Power in Renewable Energy Generation and Energy Storage

Yuxin Dong, Liping Shi, Li Han School of Electrical and Power Engineering, China University of Mining and Technology Xuzhou, China

Email: 1648669639@qq.com

Keywords: energy storage; wind power generation; renewable energy; application

Abstract: Energy storage technology is an important technology in wind power generation system, and it is also a key research topic for wind power enterprises. With the continuous development and progress of wind power generation system, various energy storage technologies are also progressing. The second generation of high temperature superconducting energy storage, high speed flywheel energy storage, all vanadium liquid flow and sodium sulfur energy storage, supercapacitor energy storage technology will be more widely used. This paper first introduces the research status of energy storage technology, and then analyses the application of energy storage technology in wind power generation system and its development prospects.

1. Introduction With the development of science and technology, energy storage is one of the most effective

ways to solve the problem of wind power grid connection. At present, there are many kinds of energy storage technologies in wind power system, and their functions and functions are quite different. The selection of energy storage forms should be based on the different requirements of wind farms and the benefits of energy storage system for wind power system. The application of energy storage technology in wind power generation system greatly improves the utilization rate of power resources and meets people's demand for power resources to the greatest extent.

2. Research status of energy storage technology Electric energy storage can be divided into four types: mechanical energy storage (such as

pumped storage, compressed air energy storage, flywheel energy storage), chemical energy storage (such as sodium-sulfur battery, liquid flow battery, lead-acid battery, nickel-cadmium battery, supercapacitor, etc.), electromagnetic energy storage (such as superconducting electromagnetic energy storage) and phase change energy storage (such as ice storage). For a long time, the research of energy storage technology in power system has focused on large-scale energy storage technology to solve the problem of peak shaving. Recently, small and medium-sized energy storage technologies such as energy storage batteries, supercapacitors, superconducting electromagnetic energy storage and high efficiency flywheels have made considerable progress, which has greatly expanded the application scope of energy storage technology. With these energy storage technologies of different scales, their application can run through all aspects of power system transmission, transformation and distribution, in order to comprehensively improve the operation efficiency, reliability, power quality and asset value of power system.

3. Application of Energy Storage Technology in Wind Power Generation System In order to further enhance the stability of wind power generation system, the use of wind energy

storage technology is becoming more and more important, so it is necessary to access energy storage equipment in wind power generation system. Of course, when accessing energy storage equipment, it is generally necessary to select energy storage devices according to the characteristics and actual requirements of wind energy, so that the wind energy storage equipment can meet the

2019 5th International Conference on Economics, Management and Humanities Science (ECOMHS 2019)

Copyright © (2019) Francis Academic Press, UK DOI: 10.25236/ecomhs.2019.2491182

corresponding needs. At the same time, the wind energy storage system can also store the surplus energy, and compensate for the use when the power is insufficient in the wind power generation system, thereby improving the stability of the wind power generation system. However, the way of wind energy storage technology is very different in structure form. Therefore, according to the different structure of energy storage technology, energy storage technology can be divided into distributed and centralized

3.1 Application of Distributed Energy Storage Technology In the application environment of distributed energy storage technology, because wind turbines

contain DC links, we can connect capacitors to DC buses. When wind speed drops and wind power can not meet the needs of power generation, we can use energy storage equipment to transmit power to DC side, and then transmit power to power grid system through converter, so that the operation of the whole power grid is more stable and reliable. The constant holding power can realize smooth power supply. When the wind speed rises, we can transfer the surplus power to the DC side, which is absorbed by the energy storage equipment system, so as to achieve a stable output of power and make full use of the power energy. These are the principles of distributed energy storage technology.

3.2 Pumped Storage Pumped storage power station in wind farm uses wind energy to generate electricity. Pumped

storage power is directly driven by pumps without batteries, and then stable power generation and supply is achieved by using stored water potential energy. The following picture is shown in the wind power system diagram of pumped storage energy in a certain area of Ningxia. Pumped storage is a mature way of energy storage. Small-scale hydroelectric power generation system has little investment. In conditional areas, it is a preferred scheme to configure pumped storage system for wind farms. Utilizing the various functions and flexibility of pumped storage power stations to compensate for the randomness and non-uniformity of wind power generation can not only break the limitation of wind capacity on the scale of power grid, but also provide more peak-load and valley-load capacity, frequency modulation, phase modulation, emergency reserve means for power grid, and improve its operation conditions. For example, in order to exploit and utilize the wind energy resources of El Hierro and Canary Islands, Spain has built corresponding pumped storage power stations to operate jointly with them, and in developed countries such as Germany, Denmark and the United States, there are many examples of such projects. For areas with abundant wind power resources, whether they are sent out or digested in situ, the complementary operation of pumped storage power generation and wind power generation should be a development trend.

Wind power generation unit

inve

rter Pumping

unitHydraulic

Generator Set

Tail water and recharge source

Reservoir

Dire

ct

curr

ent

alte

rnat

ing

curr

ent

water

water

water

water

alternating current

Wind power generation system with pumped storage

Fig.1

1183

4. Development Direction and Prospect First, large-scale energy storage can be used for peak-shaving and valley filling of global energy

internet. Large-scale and long-term energy storage facilities such as pumped storage and compressed air storage can be used for peak shaving of large power grids. The liquid flow battery has large energy storage, many cycles and long life, which can be used as a supplement to the peak shaving energy storage device of power grid. Hydrogen energy storage can be used to store surplus wind and solar energy to power fuel cell vehicles; secondly, large-scale power energy storage can be used to suppress the fluctuation of large-scale clean energy. Supercapacitors, superconducting electromagnetic energy storage, flywheel energy storage, sodium sulfur batteries and other power-type energy storage equipment mainly operate in conjunction with large-scale renewable energy, which can quickly respond to the output of wind power and photovoltaic power generation, suppress the fluctuation of renewable energy and ensure the real-time operation safety of power grid; third, small energy storage batteries can be used in electric vehicles. Lithium batteries, new lead-acid batteries, metal air batteries and other energy storage equipment have high energy and power density, but the battery identity is poor, it is difficult to form large capacity battery packs, not suitable for large power plants, mainly for electric vehicles. With the prolongation of battery life and the reduction of cost, energy storage battery can meet the needs of large-scale development of electric vehicles. In the future, the energy storage battery of electric vehicles will be connected to the global energy internet, and the charging time will be arranged reasonably to assist the peak shaving of the power grid, so as to realize the low valley charging and peak discharge. The key to the progress of energy storage technology lies in the breakthrough of material technology. With the continuous innovation and development of new energy storage materials, important breakthroughs are expected to be made in extending the service life of energy storage components, improving energy density, shortening charging time and reducing costs.

5. Conclusion In summary, in recent years, wind power has developed rapidly all over the world. The main

disadvantage of wind power generation is that its output power varies with the change of meteorological conditions, and for intermittent, in order to ensure continuous power supply to load, it is necessary to install energy storage system. The application of energy storage technology in wind power generation system mainly stores the converted electric energy through its own energy storage mode. Energy storage technology can also ensure that enough electricity is stored in the power system to provide sustained and stable power support for people.

Acknowledgement National Natural Science Foundation of China: "Real-time Error Assessment and Application of

Wind Power Prediction Based on Eigenvalues", 61703404

References [1] Cheng Shijie, Li Gang, Sun Haishun, Wen Jinyu. Application and Prospect of Energy Storage Technology in Electrical Engineering [J]. Power Grid and Clean Energy, 2009, 25 (2): 4-5. [2] Jia Hongxin, Zhang Yu, Wang Yufei, He Weiguo, Fu Yang. Application of Energy Storage Technology in Wind Power System [J]. Renewable Energy, 2009, 27 (6): 10-11. [3] Guichangqing. Storage cells in wind and solar power systems [J]. Battery industry, 2008, 13 (1): 50-54. [4] Li Chong, Zheng Yuan, Zhang Yanli. Application of energy storage technology in small and medium-sized wind power generation systems [J]. Energy saving, 2012 (1): 44-47. [5] Li Changwu. Application of Energy Storage Technology in Wind Power System [J]. Power Science and Technology, 2012 (9): 132

1184