api

Worldwide Stds (Spanish) Issue 99-12Reproducido de Information Handling Services(r)Sat Nov 03 20:55:47 2001

Sus resultados se basan en los siguientes criterios de búsqueda:Rueda de palabras: AMERICAN PETROLEUM INSTITUTE

API 82-42 1984-03-00 Influence of Loading Rate on AxiallyLoaded Piles in Clay

API MPMS 1 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 1 - Vocabulary

API MPMS 2.2A 1995-00-00 Manual of Petroleum MeasurementStandard Chapter 2 - Tank Calibration Section2A - Measurement and Calibration of UprightCylindrical Tanks by the Manual Tank StrappingMethod First Edition; Supersedes STD 2550

API MPMS 2.2B 1989-03-00 Manual of Petroleum MeasurementStandards Chapter 2 - Tank Calibration Section2B - Calibration of Upright Cylindrical TanksUsing the Optical Reference Line Method FirstEdition; Supersedes STD 2550; Erratum - 1990R(1996)

API MPMS 2.7 1991-03-00 Manual of Petroleum MeasurementStandards Chapter 2 - Tank Calibration Section7 - Calibration of Barge Tanks First EditionR(1996)

API MPMS 2.8A 1991-03-00 Manual of Petroleum MeasurementStandards Chapter 2 - Tank Calibration Section8A - Calibration of Tanks on Ships andOceangoing Barges First Edition R(1996)

API MPMS 2.8B 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 2 - Tank Calibration Section8B - Recommended Practice for the Establishmentof the Location of the Reference Gauge Point andthe Gauge Height of Tanks on Marine Tank VesselsFirst Edition

API MPMS 3.1A 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging Section 1A- Standard Practice for the Manual Gauging ofPetroleum and Petroleum Products First Edition;Replaces STD 2545

API MPMS 3.1B 1992-00-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging Section 1B- Standard Practice for Level Measurement ofLiquid Hydrocarbons in Stationary Tanks byAutomatic Tank Gauging First Edition; ReplacesSTD 2545 R(1997)

API MPMS 3.2 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging Section 2- Standard Practice for Gauging Petroleum andPetroleum Products in Tank Cars First Edition;Replaces STD 2545

API MPMS 3.3 1996-00-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging Section 3- Standard Practice for Level Measurement ofLiquid Hydrocarbons in Stationary PressurizedStorage Tanks by Automatic Tank Gauging FirstEdition; Replaces STD 2545

API MPMS 3.4 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging Section 4- Standard Practice for Level Measurement ofLiquid Hydrocarbons on Marine Vessels byAutomatic Tank Gauging First Edition; ReplacesSTD 2545

API MPMS 3.5 1997-03-00 Manual of Petroleum MeasurementStandards Chapter 3 - Tank Gauging; Section 5- Standard Practice for Level Measurement ofLight Hydrocarbon Liquids Onboard Marine Vesselsby Automatic Tank Gauging First Edition

API MPMS 4.1 1998-05-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 1


- Introduction Second Edition R(1993)API MPMS 4.2 1988-10-00 Manual of Petroleum Measurement

Standards Chapter 4 - Proving Systems Section 2- Conventional Pipe Provers First Edition; APISTD 1101, 2531, 2533, 2534 R(1993)

API MPMS 4.3 1988-07-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 3- Small Volume Provers First Edition R(1993)

API MPMS 4.4 1998-05-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 4- Tank Provers Second Edition R(1993)

API MPMS 4.5 1988-10-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 5- Master-Meter Provers First Edition; Supercedes1101, 2531, 2533, 2534 R(1993)

API MPMS 4.6 1999-05-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 6- Pulse Interpolation Second Edition R(1993)

API MPMS 4.7 1998-12-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 7- Field - Standard Test Measures Second EditionR(1993)

API MPMS 4.8 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 4 - Proving Systems Section 8- Operation of Proving Systems

API MPMS 5.1 1995-09-00 Manual of Petroleum MeasurementStandards Chapter 5 - Metering Section 1- General Considerations for Measurement byMeters Third Edition

API MPMS 5.2 1987-00-00 Manual of Petroleum MeasurementStandards Chapter 5 - Liquid Metering Section 2- Measurement of Liquid Hydrocarbons byDisplacement Meters Second Edition

API MPMS 5.3 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 5 - Metering Section 3- Measurement of Liquid Hydrocarbons by TurbineMeters

API MPMS 5.4 1995-09-00 Manual of Petroleum MeasurementStandards Chapter 5 - Metering Section 4- Accessory Equipment for Liquid Meters ThirdEdition; Errata - March 1996

API MPMS 5.5 1982-00-00 Manual of Petroleum MeasurementStandards Chapter 5 - Metering Section 5- Fidelity and Security of Flow MeasurementPulsed-Data Transmission Systems First EditionR(1997)

API MPMS 6.1 1991-05-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering AssembliesSection 1 - Lease Automatic Custody Transfer(LACT) Systems Second Edition R(1996)

API MPMS 6.2 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering AssembliesSection 2 - Loading-Rack and Tank-Truck MeteringSystems for Non-LPG Products

API MPMS 6.3 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering AssembliesSection 3 - Service Station Metered Fuel- Dispensing Systems

API MPMS 6.4 1984-06-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering Section 4- Metering Systems for Aviation FuelingFacilities First Edition R(1996)

API MPMS 6.5 1991-05-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering Assemblies

Página 2


Section 5 - Metering Systems for Loading andUnloading Marine Bulk Carriers Second EditionR(1996)

API MPMS 6.6 1991-05-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering AssembliesSection 6 - Pipeline Metering Systems SecondEdition

API MPMS 6.7 1991-00-00 Manual of Petroleum MeasurementStandards Chapter 6 - Metering AssembliesSection 7 - Metering Viscous Hydrocarbons

API MPMS 7.1 1991-02-00 Manual of Petroleum MeasurementStandards Chapter 7 - Temperature DeterminationSection 1 - Static Temperature DeterminationUsing Mercury-in-Glass Tank Thermometers FirstEdition; Replaces STD 2543

API MPMS 7.2 1995-03-00 Manual of Petroleum MeasurementStandards Chapter 7 - Temperature DeterminationSection 2 - Dynamic Temperature DeterminationSecond Edition

API MPMS 7.3 1985-07-00 Manual of Petroleum MeasurementStandards Chapter 7 - Temperature DeterminationSection 3 - Static Temperature DeterminationUsing Portable Electronic Thermometers FirstEdition

API MPMS 7.4 1993-00-00 Manual of Petroleum MeasurementStandards Chapter 7 - Temperature DeterminationSection 4 - Static Temperature DeterminationUsing Fixed Automatic Tank Thermometers

API MPMS 8.1 1995-10-00 Manual of Petroleum MeasurementStandards Chapter 8 - Sampling Section 1- Standard Practice for Manual Sampling ofPetroleum and Petroleum Products Third Edition;ASTM D4057

API MPMS 8.2 1995-10-00 Manual of Petroleum MeasurementStandards Chapter 8 - Sampling Section 2- Standard Practice for Automatic Sampling ofLiquid Petroleum and Petroleum Products SecondEdition; ASTM D4177

API MPMS 8.3 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 8 - Sampling Section 3- Standard Practice for Mixing and Handling ofLiquid Samples of Petroleum and PetroleumProducts First Edition; ASTM D5854

API MPMS 8.4 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 8 - Sampling Section 4- Standard Practice for Manual Sampling andHandling of Fuels for Volatility MeasurementFirst Edition; ASTM D5842

API MPMS 9.1 1981-06-00 Manual of Petroleum MeasurementStandards Chapter 9 - Density DeterminationSection 1 - Hydrometer Test Method for Density,Relative Density (Specific Gravity), or APIGravity of Crude Petroleum and Liquid PetroleumProducts ASTM D1298 - 80 R(1992)

API MPMS 9.2 1982-04-00 Manual of Petroleum MeasurementStandards Chapter 9 - Density DeterminationSection 2 - Pressure Hydrometer Test Method forDensity or Relative Density First EditionR(1992)

API MPMS 9.3 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 9 - Density DeterminationSection 3 - Thermohydrometer Test Method forDensity and API Gravity of Crude Petroleum andLiquid Petroleum Products

API MPMS 10.1 1981-04-00 Manual of Petroleum MeasurementPágina 3


Standards Chapter 10 - Sediment and WaterSection 1 - Determination of Sediment in CrudeOils and Fuel Oils by the Extraction Method ASTMD473 R(1993)

API MPMS 10.2 1981-04-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 2 - Determination of Water in Crude Oilby the Distillation Method ASTM D4006 R(1993)

API MPMS 10.3 1981-04-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 3 - Determination of Water and Sedimentin Crude Oil by the Centrifuge Method(Laboratory Procedure) ASTM D4007 R(1993)

API MPMS 10.4 1988-05-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 4 - Determination of Sediment and Waterin Crude Oil by the Centrifuge Method (FieldProcedure) ASTM D96-88 R(1993)

API MPMS 10.5 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 5 - Water Determination in PetroleumProducts and Bituminous Materials byDistillation

API MPMS 10.6 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 6 - Determination of Water and Sedimentin Fuel Oils by the Centrifuge Method(Laboratory Procedure) Second Edition; ASTMD1796

API MPMS 10.7 1991-00-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 7 - Standard Test Method for Water inCrude Oils by Karl Fischer Titration(Volumetric) First Edition; ASTM D 4377; IP356/87; (R 1996)

API MPMS 10.8 1991-02-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 8 - Standard Test Method for Sediment inCrude Oil by Membrane Filtration First Edition;ASTM D 4807-88 R(1993)

API MPMS 10.9 1993-00-00 Manual of Petroleum MeasurementStandards Chapter 10 - Sediment and WaterSection 9 - Standard Test Method for Water inCrude Oils by Coulometric Karl Fischer Titration

API MPMS 11.1 VOL I 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume I Table 5A - Generalized CrudeOils and JP-4 Correction of Observed API Gravityto API Gravity at 60 Degrees F Table 6A- Generalized Crude Oils and JP-4 Correction ofVolume to 60 Degrees F Against API Gravity at 60Degrees F First Edition; ASTM D1250; IP 200; (R1993)

API MPMS 11.1 VOL II 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume II Table 5B - GeneralizedProducts Correction of Observed API Gravity toAPI Gravity at 60 Degrees F Table 6B- Generalized Products Correction of Volume to60 Degrees F Against API Gravity at 60 Degrees FFirst Edition; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL III 1980-08-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume III Table 6C - Volume CorrectionFactors for Individual and Special Applications

Página 4


Volume Correction to 60 Degrees F AgainstThermal Expansion Coefficients at 60 Degrees FFirst Edition; ASTM D1250; IP 200; Addendum- 1995 R(1993)

API MPMS 11.1 VOL IV 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume IV Table 23A - Generalized CrudeOils Correction of Observed Relative Density toRelative Density 60/60 Degrees F Table 24A- Generalized Crude Oils Correction of Volume to60 Degrees F Against Relative Density 60/60Degrees F First Edition; ASTM D1250; IP 200; (R1993)

API MPMS 11.1 VOL V 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume V Table 23B - GeneralizedProducts Correction of Observed Relative Densityto Relative Density 60/60 Degrees F Table 24B- Generalized Products Correction of Volume to60 Degrees F Against Relative Density 60/60Degrees F First Edition; Errata - 1981 (ASTMD1250) (IP 200) (R 1993)

API MPMS 11.1 VOL VI 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume VI Table 24C - Volume CorrectionFactors for Individual and Special ApplicationsVolume Correction to 60 Degrees F AgainstThermal Expansion Coefficients at 60 Degrees FFirst Edition; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL VII 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume VII Table 53A - Generalized CrudeOils Correction of Observed Density to Densityat 15 Degrees C Table 54A - Generalized CrudeOils Correction of Volume to 15 Degrees CAgainst Density at 15 Degrees C First Edition;ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL VIII 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume VIII Table 53B - GeneralizedProducts Correction of Observed Density toDensity at 15 Degrees C Table 54B - GeneralizedProducts Correction of Volume to 15 Degrees CAgainst Density at 15 Degrees C First Edition;Errata - 1981; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL IX 1980-08-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume IX Table 54C - Volume CorrectionFactors for Individual and Special ApplicationsVolume Correction to 15 Degrees C AgainstThermal Expansion Coefficients at 15 Degrees CFirst Edition; ASTM D1250; IP 200; Addendum- 1995 R(1980)

API MPMS 11.1 VOL X 1980-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume X - Background, Development, andProgram Documentation First Edition; EditorialAmplification; ASTM D1250; IP 200; (R 1993)

API MPMS 11.1 VOL XIII 1982-00-00 Manual of Petroleum MeasurementStandards Chapter 11.1 - Volume CorrectionFactors Volume XIII Table 5D-GeneralizedLubricating Oils Correction of Observed APIGravity to API Gravity at 60 Degrees F Table 6D-Generalized Lubricating Oils Correction ofVolume to 60 Degrees F Against API Gravity at 60

Página 5


Degrees F ASTM D1250; (R 1993)API MPMS 11.1 VOL XIV 1982-00-00 Manual of Petroleum Measurement

Standards Chapter 11.1-Volume CorrectionFactors, Volume XIV, Table 53D- GeneralizedLubricating Oils Correction of Observed Densityto Density at 15 Degrees C Table 54D-GeneralizedLubricating Oils Correction of Volume to 15Degrees C Against Density at 15 Degrees CErrata - August 1982; ASTM D1250; (R 1993)

API MPMS 11.2.1 1984-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.1 - CompressibilityFactors for Hydrocarbons: 0-90 Degrees APIGravity Range

API MPMS 11.2.1M 1984-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.1M - CompressibilityFactors for Hydrocarbons: 638-1074 Kilograms perCubic Metre Range Erratum - February 1985; (R1996)

API MPMS 11.2.2 1986-10-00 Manual of Petroleum MeasurementStandards Chapter 11.2.2 - CompressibilityFactors for Hydrocarbons: 0.350-0.637 RelativeDensity (60 Degrees F/ 60 Degrees F) and -50Degrees F to 140 Degrees F Metering TemperatureSecond Edition; GPA 8286-86 R(1992)

API MPMS 11.2.2 ADDENDUM 1994-12-00 Manual of Petroleum MeasurementStandards Chapter 11 - Physical Properties DataAddendum to Section 2, Part 2 - CompressibilityFactors for Hydrocarbons, Correlation of VaporPressure for Commercial Natural Gas LiquidsFirst Edition; Errata 1996

API MPMS 11.2.2M 1986-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.2M - CompressibilityFactors for Hydrocarbons: 350-637 Kilograms perCubic Metre Density (15 Degrees C) and -46Degrees C to 60 Degrees C Metering TemperatureGPA 8286M-86; (R 1992)

API MPMS 11.2.3 1984-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.3 - Water Calibration ofVolumetric Provers

API MPMS 11.2.3M 1984-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.3M - Water Calibration ofVolumetric Provers (R 1996)

API MPMS 12.1.1 1996-08-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 1 - Calculation of StaticPetroleum Quantities Part 1 - UprightCylindrical Tanks and Marine Vessels FirstEdition; Errata April 24, 1997; Interim Report4/24/1998

API MPMS 12.2 1981-00-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 2 - Calculation of LiquidPetroleum Quantities Measured by Turbine orDisplacement Meters

API MPMS 12.2.1 1995-05-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 2 - Calculation of PetroleumQuantities Using Dynamic Measurement Methods andVolumetric Correction Factors Part 1- Introduction Second Edition

API MPMS 12.2.2 1995-05-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 2 - Calculation of PetroleumQuantities Using Dynamic Measurement Methods andVolumetric Correction Factors Part 2

Página 6


- Measurement Tickets Second EditionAPI MPMS 12.2.3 1998-10-00 Calculation of Petroleum Quantities

- Section 2 - Calculation of PetroleumQuantities Using Dynamic Measurement Methods andVolumetric Correction Factors - Part 3 - ProvingReports First Edition; Errata November 6, 1998,Effective Date is May 1, 1999

API MPMS 12.2.4 1997-12-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 2 - Calculation of PetroleumQuantities Using Dynamic Measurement Methods andVolumetric Correction Factors Part 4- Calculation of Base Prover Volumes by theWaterdraw Method First Edition

API MPMS 12.3 1996-00-00 Manual of Petroleum MeasurementStandards Chapter 12 - Calculation of PetroleumQuantities Section 3 - Volumetric ShrinkageResulting from Blending Light Hydrocarbons withCrude Oils

API MPMS 13.1 1985-00-00 Manual of Petroleum MeasurementStandards Chapter 13 - Statistical Aspects ofMeasuring and Sampling Section 1 - StatisticalConcepts and Procedures in Measurement

API MPMS 13.2 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 13 - Statistical Aspects ofMeasuring and Sampling Section 2 - Methods ofEvaluating Meter Proving Data

API MPMS 14.1 1993-08-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 1 - Collecting and Handlingof Natural Gas Samples for Custody TransferFourth Edition

API MPMS 14.3.1 1990-00-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 3 - Concentric, Square-EdgedOrifice Meters Part 1 - General Equations andUncertainty Guidelines Third Edition; Errata- 1991; Errata - 1993; Replaces API MPMS 14.3;(R 1995)

API MPMS 14.3.2 1991-00-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas Fluids Mst.Section 3 - Concentric, Square-Edged OrificeMeters Part 2 - Spec. and InstallationRequirements (AGA Report No. 3, Part 2 and GPA8185-90, Part 2)

API MPMS 14.3.3 1992-00-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 3 - Concentric, Square-EdgedOrifice Meters Part 3 - Natural Gas Applications

API MPMS 14.3.4 1992-00-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 3 - Concentric, Square-EdgedOrifice Meters Part 4 - Background,Development, Implementation Proc. and SubroutineDoc. Third Edition; Replaces API MPMS 14.3

API MPMS 14.4 1991-04-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 4 - Converting Mass ofNatural Gas Liquids and Vapors to EquivalentLiquid Volumes First Edition

API MPMS 14.5 1996-00-00 Calculation of Gross Heating Value,Relative Density and Compressibility Factor forNatural Gas Mixtures from Compositional AnalysisGPA STD 2172-96

API MPMS 14.6 1991-00-00 Manual of Petroleum Measurement

Página 7


Standards Chapter 14 - Natural Gas FluidsMeasurement Section 6 - Continuous DensityMeasurement

API MPMS 14.7 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 7 - Mass Measurement ofNatural Gas Liquids GPA STD 8182-95

API MPMS 14.8 1997-07-00 Manual of Petroleum MeasurementStandards Chapter 14 - Natural Gas FluidsMeasurement Section 8 - Liquefied Petroleum GasMeasurement Second Edition

API MPMS 15 1980-12-00 Manual of Petroleum MeasurementStandards Chapter 15 - Guidelines for the Use ofthe International System of Units (SI) in thePetroleum and Allied Industries API PUBL 2564R(1992)

API MPMS 16.2 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 16 - Measurement ofHydrocarbon Fluids by Weight or Mass Section 2- Mass Measurement of Liquid Hydrocarbons inVertical Cylindrical Storage Tanks byHydrostatic Tank Gauging

API MPMS 17.1 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 1 - Guidelines for Marine CargoInspection

API MPMS 17.2 1999-05-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 2 - Measurement of Cargoes on Board TankVessels Second Edition

API MPMS 17.2A 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 2A - Closed and Restricted Systems

API MPMS 17.3 1992-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 3 - Guidelines for Identification of theSource of Free Waters Associated with MarinePetroleum Cargo Movements First Edition; Errata- 1992 R(1997)

API MPMS 17.4 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 4 - Method for Quantification of SmallVolumes on Marine Vessels (OBQ/ROB)

API MPMS 17.5 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 5 - Guidelines for Cargo Analysis andReconciliation

API MPMS 17.6 1994-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 6 - Guidelines for Determining theFullness of Pipelines between Vessels and ShoreTanks

API MPMS 17.7 1995-00-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 7 - Recommended Practices for DevelopingBarge Control Factors (Volume Ratio)

API MPMS 17.8 1998-08-00 Manual of Petroleum MeasurementStandards Chapter 17 - Marine MeasurementSection 8 - Guidelines for Pre-LoadingInspection of Marine Vessel Cargo Tanks FirstEdition

API MPMS 18.1 1997-04-00 Manual of Petroleum MeasurementStandards Chapter 18 - Custody Transfer; Section1 - Measurement Procedures for Crude Oil

Página 8


Gathered From Small Tanks by Truck SecondEdition

API MPMS 19.1 1991-00-00 Manual of Petroleum MeasurementStandards Chapter 19 - Evaporative LossMeasurement Section 1 - Evaporative Loss fromFixed-Roof Tanks Second Edition; Supersedes BULL2518

API MPMS 19.1D 1993-00-00 Documentation File for API Manual ofPetroleum Measurement Standards Chapter 19.1- Evaporative Loss from Fixed Roof Tanks FirstEdition; Erratum - 1994; API Bulletin 2518

API MPMS 19.2 1997-04-00 Manual of Petroleum MeasurementStandards Chapter 19 - Evaporative LossMeasurement; Section 2 - Evaporative Loss fromFloating-Roof Tanks First Edition; Formerly, APIPublications 2517 and 2519

API MPMS 19.3 PART A 1997-06-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement Part A - Wind Tunnel Test Method forthe Measurement of Deck-Fitting Loss Factors forExternal Floating-Roof Tanks First Edition

API MPMS 19.3 PART B 1997-08-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement Part B - Air Concentration TestMethod - Rim-Seal Loss Factors for Floating-RoofTanks First Edition

API MPMS 19.3 PART C 1998-07-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement Part C - Weight Loss Test Method forthe Measurement of Rim-Seal Loss Factors forInternal Floating-Roof Tanks First Edition

API MPMS 19.3 PART E 1997-05-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement; Part E - Weight Loss Test Methodfor the Measurement of Deck-Fitting Loss Factorsfor Internal Floating-Roof Tanks First Edition

API MPMS 19.3 PART F 1997-03-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement; Part F - Evaporative Loss Factorfor Storage Tanks Certification Program FirstEdition

API MPMS 19.3 PART G 1997-03-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement; Part G - Certified Loss FactorTesting Laboratory Registration First Edition

API MPMS 19.3 PART H 1998-03-00 Manual of Petroleum MeasurementStandards Chapter 19.3 - Evaporative LossMeasurement; Part H - Tank Seals and FittingsCertification - Administration First Edition

API MPMS 19.4 1997-11-00 Manual of Petroleum MeasurementStandards Chapter 19.4 - Recommended Practicefor Specification of Evaporative Losses FirstEdition

API MPMS 20.1 1993-00-00 Manual of Petroleum MeasurementStandards Chapter 20 - Allocation MeasurementSection 1 - Allocation Measurement

API MPMS 21.1 1993-00-00 Manual of Petroleum MeasurementStandards Chapter 21 - Flow Measurement UsingElectronic Metering Systems Section 1- Electronic Gas Measurement

API MPMS 21.2 1998-06-00 Manual of Petroleum MeasurementStandards Chapter 21 - Flow Measurement UsingElectronic Metering Systems Section 2- Electronic Liquid Volume Measurement Using

Página 9


Positive Displacement and Turbine Meters FirstEdition

API MPMS COMP 1984-00-00 Manual of Petroleum MeasurementStandards Chapter 11.2.1 and 11.2.1M; Chapter11.2.3 and 11.2.3M; Computer Tape Informationand Documentation Erratum - October 1984

API RP T-1 1995-00-00 Orientation Programs for PersonnelGoing Offshore for the First Time Fourth Edition

API RP T-4 1995-00-00 Training of Offshore Personnel inNonoperating Emergencies Second Edition

API RP T-7 1995-00-00 Training of Personnel in Rescue ofPersons in Water Second Edition

API 1996-00-00 Vocational Training - Book 1- Introduction to Oil and Gas Production FifthEdition

API 1990-00-00 Vocational Training - Book 2- Corrosion of Oil- and Gas-Well EquipmentSecond Edition

API 1995-00-00 Vocational Training - Book 3- Subsurface Salt Water Injection and DisposalThird Edition

API 1994-00-00 Vocational Training - Book 5- Wireline Operations and Procedures ThirdEdition

API 1994-00-00 Vocational Training - Book 6 - GasLift Third Edition

API PUBL 1200 1998-01-00 Federally Mandated Training andInformation Third Edition

API PUBL 1210 1994-12-00 Trainer Competencies API CentralCommittee on Training and Development FirstEdition

API TR 10TR2 1997-07-00 Shrinkage and Expansion in OilwellCements First Edition

API TR 10TR3 1999-05-00 Technical Report on Temperatures forAPI Cement Operating Thickening Time Tests 1993Report from the API Task Group on CementingTemperature Schedules First Edition

API 1987-12-00 1986 Interpretations - TechnicalPublications Answers to Technical Inquiries


API 1991-09-00 1989 and 1990 Interpretations- Technical Publications Answers to TechnicalInquiries




API 1996-02-00 1994 and 1995 Interpretations- Technical Publications Answers to TechnicalInquiries

API TR 4686-007 1999-00-00 Myths and Realities of Oil SpillPlanning and Response: the Challenges of a LargeSpill

API TR 4686-008 1999-00-00 Judging Oil Spill ResponsePerformance: the Challenge of CompetingPerspectives

API BULL E1 1990-00-00 Bulletin on the Generic HazardousChemical Category List and Inv. for the Oil andGas Exploration and Production Ind. SuperfundAmendments and Reauthorization Act of 1986,Emer. Planning & Comm. Right-to-Know Act, Title

Página 10


III Sec. 311 and 312API 1997-10-00 Cumulative Impact of Environmental

Regulations on the U.S. Petroleum Refining,Transportation and Marketing Industries

API API S1 1997-06-01 Organization and Procedures forStandardization of Oilfield Equipment andMaterials Nineteenth Edition

API TR IOSC-001 1994-12-00 1995 International Oil SpillConference Implementing an Effective ResponseManagement System

API 1998-10-01 Companies Licensed to Use the APIMonogram and APIQR ISO 9000 Registration MarkVolume 6, Number 4

API SPEC Q1 1999-03-01 Specification for Quality Programsfor the Petroleum and Natural Gas Industry SixthEdition

API SPEC 1B 1995-00-00 Specification for Oil-Field V-BeltAPI BULL E2 1992-00-00 Bulletin on Management of Naturally

Occurring Radioactive Materials (NORM) in Oil& Gas Production

API TR IOSC-002 1994-12-00 1995 International Oil SpillConference Use and Misuse of Science in NaturalResource Damage Assessment

API RP 2A-LRFD 1993-07-01 Recommended Practice for Planning,Designing and Constructing Fixed OffshorePlatforms - Load and Resistance Factor DesignFirst Edition; Errata - October 1993; Supplement1 - February 1997

API RP 2A-WSD 1993-07-01 Recommended Practice for Planning,Designing and Constructing Fixed OffshorePlatforms - Working Stress Design TwentiethEdition; Supplement 1-1996

API SPEC 2B 1996-00-00 Specification for the Fabrication ofStructural Steel Pipe

API SPEC 2C 1995-00-00 Specification for Offshore CranesAPI RP 2D 1999-08-00 Recommended Practice for Operation

and Maintenance of Offshore Cranes FourthEdition

API SPEC 2F 1997-06-00 Specification for Mooring Chain SixthEdition

API SPEC 2H 1999-08-00 Specification for Carbon ManganeseSteel Plate for Offshore Platform Tubular JointsEighth Edition; Effective Date: February 1, 2000

API RP 2I 1996-12-00 In-Service Inspection of MooringHardware for Floating Drilling Units SecondEdition

API RP 2L 1996-00-00 Recommended Practice for Planning,Designing, and Constructing Heliports for FixedOffshore Platforms

API RP 2M 1996-00-00 Recommended Practice forQualification Testing of Steel Anchor Designsfor Floating Structures

API SPEC 2MT1 1994-00-00 Specification for As-Rolled CarbonManganese Steel Plate with Improved Toughnessfor Offshore Structures

API RP 2N 1995-00-00 Recommended Practice for Planning,Designing, and Constructing Structures andPipelines for Arctic Conditions

API RP 2P 1987-00-00 Recommended Practice for the Analysisof Spread Mooring Systems for Floating DrillingUnits

API RP 2R 1984-00-00 Recommended Practice for Design,Rating, and Testing of Marine Drilling RiserCouplings

Página 11


API RP 2RD 1998-06-00 Design of Risers for FloatingProduction Systems (FPSs) and Tension-LegPlatforms (TLPs) First Edition

API 2S 1995-00-00 Design of Windlass Wildcats forFloating Offshore Structures Second Edition

API RP 2SK 1996-12-00 Recommended Practice for Design andAnalysis of Stationkeeping Systems for FloatingStructures Second Edition; Replaces RP 2FP1

API RP 2T 1997-08-00 Recommended Practice for Planning,Designing, and Constructing Tension LegPlatforms Second Edition

API BULL 2U 1987-00-00 Bulletin on Stability Design ofCylindrical Shells

API BULL 2V 1987-00-00 Bulletin on Design of Flat PlateStructures

API SPEC 2W 1999-08-00 Specification for Steel Plates forOffshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP) FourthEdition; Effective Date: February 1, 2000

API RP 2X 1996-00-00 Recommended Practice for Ultrasonicand Magnetic Examination of Offshore StructuralFabrication and Guidelines for Qualification ofTechnicians

API SPEC 2Y 1993-00-00 Specification for Steel Plates,Quenched-and-Tempered, for Offshore StructuresThird Edition

API RP 2Z 1998-08-00 Recommended Practice forPreproduction Qualification for Steel Plates forOffshore Structures Third Edition; Errata,November 1998

API BULL E3 1993-00-00 Environmental Guidance Document: WellAbandonment and Inactive Well Practices forU.S. Exploration and Production Operations

API 1996-00-00 National Used Oil Collection StudyAddendum - August 1997

API TR IOSC-003 1994-12-00 1995 International Oil SpillConference Perspectives on Establishing andMaintaining Oil Pollution Response Capabilities

API 1989-00-00 Onshore Solid Waste Management inExploration and Production Operations

API BULL E4 1993-06-01 Environmental Guidance Document:Release Reporting for the Oil and GasExploration and Production Industry as Requiredby the CWA, CERCLA, and SARA Title III FirstEdition

API SPEC 4F 1995-00-00 Specification for Drilling and WellServicing Structures

API RP 4G 1998-10-00 Recommended Practice for Maintenanceand Use of Drilling and Well ServicingStructures Second Edition

API 1990-00-00 Proceedings of the 1990 API PipelineConference

API API E5 1997-02-00 Environmental Guidance Document:Waste Management in Exploration and ProductionOperations Second Edition

API BULL 5A2 1988-00-00 Bulletin on Thread Compounds forCasing, Tubing, and Line Pipe Sixth Edition;Superseded by RP 5A3

API RP 5A3 1996-00-00 Recommended Practice on ThreadCompounds for Casing, Tubing, and Line PipeFirst Edition; Supersedes Bull 5A2

API RP 5A5 1997-12-00 Field Inspection of New Casing,Tubing, and Plain End Drill Pipe Sixth Edition

API SPEC 5B 1996-08-00 Specification for Threading,

Página 12


Gauging, and Thread Inspection of Casing,Tubing, and Line Pipe Threads (U.S. CustomaryUnits) Fourteenth Edition; Errata 4/9/1998

API RP 5B1 1996-12-00 Gauging and Inspection of Casing,Tubing, and Line Pipe Threads Fourth Edition

API RP 5C1 1999-05-00 Recommended Practice for Care and Useof Casing and Tubing Eighteenth Edition

API BULL 5C2 1987-00-00 Bulletin on Performance Properties ofCasing, Tubing, and Drill Pipe

API BULL 5C3 1994-00-00 Bulletin on Formulas and Calculationsfor Casing, Tubing, Drill Pipe and Line PipeProperties

API RP 5C5 1996-11-00 Recommended Practice for EvaluationProcedures for Casing and Tubing ConnectionSecond Edition

API RP 5C6 1996-12-00 Welding Connections to Pipe FirstEdition

API RP 5C7 1996-12-00 Coiled Tubing Operations in Oil andGas Well Services First Edition

API SPEC 5CT 1998-10-00 Specification for Casing and Tubing(U.S. Customary Units) Sixth Edition; EffectiveDate April 15, 1999; Errata May 1999

API SPEC 5CT (METRIC) 1995-00-00 Specification for Casing and Tubing(Metric Units) Fifth Edition

API SPEC 5D 1992-00-00 Specification for Drill PipeAPI SPEC 5L 1995-04-01 Specification for Line Pipe Forty-

First Edition; Errata - December 15, 1997API RP 5L1 1996-12-00 Recommended Practice for Railroad

Transportation of Line Pipe Fifth EditionAPI RP 5L2 1987-00-00 Recommended Practice for Internal

Coating of Line Pipe for Non-Corrosive GasTransmission Service

API RP 5L3 1996-00-00 Recommended Practice for ConductingDrop-Weight Tear Tests on Line Pipe

API RP 5L7 1988-00-00 Recommended Practices for UnprimedInternal Fusion Bonded Epoxy Coating of LinePipe

API RP 5L8 1996-12-00 Recommended Practice for FieldInspection of New Line Pipe Second Edition

API SPEC 5LC 1998-07-00 Specification for CRA Line Pipe ThirdEdition

API SPEC 5LD 1998-07-00 Specification for CRA Clad or LinedSteel Pipe Second Edition

API RP 5LW 1996-12-00 Recommended Practice forTransportation of Line Pipe on Barges and MarineVessels Second Edition

API STD 5T1 1996-11-00 Standard on Imperfection TerminologyTenth Edition; Formerly Bull 5T1

API MF 5U01 1993-06-01 Model Form of Voluntary UnitAgreement Fourth Edition

API MF 5U02 1993-06-01 Model Form of Voluntary UnitOperating Agreement Fourth Edition

API MF 5U03 1993-06-01 Model Form of Statutory UnitAgreement Second Edition

API MF 5U04 1993-06-01 Model Form of Statutory UnitOperating Agreement Second Edition

API 1990-00-00 Proceedings of the 1990 API PipelineCybernetics Symposium

API SPEC 6A 1996-00-00 Specification for Wellhead andChristmas Tree Equipment

API BULL 6AF 1995-00-00 Technical Report on Capabilities ofAPI Flanges under Combinations of Load SecondEdition

Página 13


API TR 6AF1 1998-11-00 Technical Report on TemperatureDerating on API Flanges under Combination ofLoading Second Edition

API TR 6AF2 1999-04-00 Technical Report on Capabilities ofAPI Integral Flanges under Combination ofLoading - Phase II Second Edition

API 6AM 1995-00-00 Technical Report on MaterialToughness Second Edition; Formerly Bulletin 6AM

API RP 6AR 1994-04-15 Recommended Practice for Repair andRemanufacture of Wellhead and Christmas TreeEquipment First Edition

API SPEC 6AV1 1996-02-01 Specification for Verification Testof Wellhead Surface Safety Valves and UnderwaterSafety Valves for Offshore Service FirstEdition; Errata - December 1996

API SPEC 6D 1994-03-31 Specification for Pipeline Valves(Gate, Ball, and Check Valves) Twenty-FirstEdition; Supplement 2 Effective June 1, 1998

API TR 6F1 1999-04-00 Technical Report on Performance ofAPI and ANSI End Connections in a Fire TestAccording to API Specification 6FA Third Edition

API TR 6F2 1999-04-00 Technical Report on Fire ResistanceImprovements for API Flanges Third Edition

API SPEC 6FA 1999-04-00 Specification for Fire Test forValves Third Edition

API SPEC 6FB 1998-11-30 API Specification for Fire Test forEnd Connections Third Edition

API SPEC 6FC 1999-04-00 Specification for Fire Test forValves with Automatic Backseats Third Edition

API SPEC 6FD 1995-00-00 Specification for Fire Test for CheckValves

API SPEC 6H 1998-05-01 Specification on End Closures,Connectors and Swivels

API BULL 6J 1992-00-00 Bulletin on Testing of OilfieldElastomers - A Tutorial

API BULL 6RS 1990-00-00 (Withdrawn)Bulletin on ReferencedStandards for Committee 6, Standardization ofValves and Wellhead Equipment

API 1994-00-00 Proceedings of the 1994 API TankerConference Image - A Global Maritime Mission

API SPEC 7 1997-12-00 Specification for Rotary Drill StemElements Thirty-Ninth Edition

API RP 7A1 1992-00-00 Recommended Practice for Testing ofThread Compound for Rotary ShoulderedConnections

API SPEC 7B-11C 1994-00-00 Specification for Internal-CombustionReciprocating Engines for Oil-Field Service

API RP 7C-11F 1994-00-00 Recommended Practice forInstallation, Maintenance, and Operation ofInternal-Combustion Engines

API SPEC 7F 1993-00-00 Specification for Oil-Field Chain andSprockets

API RP 7G 1998-08-00 Recommended Practice for Drill StemDesign and Operating Limits Sixteenth Edition

API SPEC 7K 1996-02-00 Specification for Drilling EquipmentSecond Edition; Errata 4/20/1998

API RP 7L 1995-00-00 Procedures for Inspection,Maintenance, Repair, and Remanufacture ofDrilling Equipment

API 1996-00-00 Product/Service Certification in theExploration & Production Sector of the WorldwideOil and Gas Industry Needs Assessment SurveyReport

Página 14


API BULL D8 1964-00-00 Tabular Method for Determining theChange of the Overall Angle and Dog-LegSeverity (for Hole Inclinations up to 70Degrees)

API SPEC 8A 1997-12-00 Specification for Drilling andProduction Hoisting Equipment Thirteenth Edition

API RP 8B 1997-12-00 Recommended Practice for Proceduresfor Inspections, Maintenance, Repair, andRemanufacture of Hoisting Equipment SixthEdition

API SPEC 8C 1997-12-00 Specification for Drilling andProduction Hoisting Equipment (PSL 1 and PSL 2)Third Edition

API 1996-00-00 Summary of U.S. OccupationalInjuries, Illnesses, and Fatalities in thePetroleum Industry

API SPEC 9A 1995-00-00 Specification for Wire RopeAPI RP 9B 1999-06-00 Recommended Practice on Application,

Care, and Use of Wire Rope for Oil Field ServiceTenth Edition

API SPEC 10 1990-00-00 Specification for Materials andTesting for Well Cements

API 1991-00-00 Worldwide Cementing Practices FirstEdition (R 1995)

API BULL D10 1973-00-00 Selecting Rotary Drilling Equipment,Procedure for

API SPEC 10A 1995-00-00 Specification for Cements andMaterials for Well Cementing

API RP 10B 1997-12-00 Recommended Practice for Testing WellCements Twenty-Second Edition

API SPEC 10D 1995-00-00 Specification for Bow-Spring CasingCentralizers

API RP 10E 1994-00-00 (Withdrawn)Recommended Practice forApplication of Cement Lining to Steel TubularGoods, Handling, Installation and Joining ThirdEdition; ISO 10409

API RP 10F 1995-00-00 Recommended Practice for PerformanceTesting of Cementing Float Equipment

API TR 10TR1 1996-00-00 Cement Sheath EvaluationAPI RP 11AR 1989-00-00 Recommended Practice for Care and Use

of Subsurface PumpsAPI SPEC 11AX 1996-00-00 Specification for Subsurface Sucker

Rod Pumps and FittingsAPI SPEC 11B 1998-01-01 Specification for Sucker Rods Twenty-

Sixth EditionAPI RP 11BR 1989-10-01 Recommended Practice for Care and

Handling of Sucker Rods Eighth Edition;Supplement 1 10-1-1990; Supplement 2 7-1-1991

API SPEC 11E 1994-00-00 Specification for Pumping UnitsAPI RP 11ER 1990-00-00 Recommended Practice for Guarding of

Pumping UnitsAPI RP 11G 1994-00-00 Recommended Practice for Installation

and Lubrication of Pumping UnitsAPI BULL 11K 1988-00-00 Bulletin Data Sheet for the Design of

Air Exchange CoolersAPI RP 11L 1988-00-00 Recommended Practice for Design

Calculations for Sucker Rod Pumping Systems(Conventional Units)

API BULL 11L2 1969-00-00 Catalog of Analog ComputerDynamometer Cards

API BULL 11L3 1970-00-00 Sucker Rod Pumping System Design BookErrata - November 1973, Supplement 1 - 1977 (R1994)

Página 15


API BULL 11L4 1970-00-00 Curves for Selecting Beam PumpingUnits

API BULL 11L5 1990-00-00 Bulletin on Electric MotorPerformance Data Request Form

API SPEC 11L6 1993-06-01 Specification for Electric MotorPrime Mover for Beam Pumping Unit Service FirstEdition; Supplement 1 1996

API SPEC 11N 1994-00-00 Specification for Lease AutomaticCustody Transfer (LACT) Equipment

API SPEC 11P 1989-00-00 Specification for PackagedReciprocating Compressors for Oil and GasProduction Services

API RP 11PGT 1992-00-00 Recommended Practice for PackagedCombustion Gas Turbines

API RP 11S 1994-00-00 Recommended Practice for theOperation, Maintenance and Troubleshooting ofElectric Submersible Pump Installations

API RP 11S1 1997-09-00 Recommended Practice for ElectricalSubmersible Pump Teardown Report Third Edition

API RP 11S2 1997-08-00 Recommended Practice for ElectricSubmersible Pump Testing Second Edition;Effective Date: 10/01/1997

API RP 11S3 1999-03-00 Recommended Practice for ElectricSubmersible Pump Installations Second Edition

API RP 11S4 1993-00-00 Recommended Practice for Sizing andSelection of Electric Submersible PumpInstallations First Edition; Replaces API RP 11U

API RP 11S5 1993-00-00 Recommended Practice for Applicationof Electric Submersible Cable Systems

API RP 11S6 1995-00-00 Recommended Practice for Testing ofElectric Submersible Pump Cable Systems

API RP 11S7 1993-00-00 Recommended Practice on Applicationand Testing of Electric Submersible Pump SealChamber Sections

API RP 11S8 1993-00-00 Recommended Practice on ElectricSubmersible Pump System Vibrations

API RP 11T 1994-00-00 Recommended Practice for Installationand Operation of Wet Steam Generators

API SPEC 11V1 1995-00-00 Specification for Gas Lift EquipmentAPI RP 11V2 1995-00-00 Recommended Practice for Gas Lift

Valve Performance TestingAPI RP 11V5 1999-06-00 Recommended Practice for Operations,

Maintenance, and Trouble-Shooting of Gas LiftInstallations Second Edition

API RP 11V6 1999-07-00 Recommended Practice for Design ofContinuous Flow Gas Lift Installations UsingInjection Pressure Operated Valves SecondEdition

API RP 11V7 1999-06-00 Recommended Practice for Repair,Testing, and Setting Gas Lift Valves SecondEdition

API SPEC 12B 1995-00-00 Specification for Bolted Tanks forStorage of Production Liquids

API SPEC 12D 1994-00-00 Specification for Field Welded Tanksfor Storage of Production Liquids

API SPEC 12F 1994-00-00 Specification for Shop Welded Tanksfor Storage of Production Liquids

API SPEC 12GDU 1990-00-00 Specification for Glycol-Type GasDehydration Units

API SPEC 12J 1989-00-00 Specification for Oil and GasSeparators

API SPEC 12K 1989-00-00 Specification for Indirect Type Oil-Field Heaters

Página 16


API SPEC 12L 1994-00-00 Specification for Vertical andHorizontal Emulsion Treaters

API RP 12N 1994-00-00 Recommended Practice for theOperation, Maintenance and Testing of FireboxFlame Arrestors

API SPEC 12P 1995-00-00 Specification for FiberglassReinforced Plastic Tanks

API RP 12R1 1997-08-00 Recommended Practice for Setting,Maintenance, Inspection, Operation and Repair ofTanks in Production Service Fifth Edition;Effective Date: 10/01/1997

API SPEC 13A 1993-05-01 Specification for Drilling-FluidMaterials Addendum 1 June 1999, Effective Date:December 1999

API RP 13B-1 1997-09-00 Recommended Practice StandardProcedure for Field Testing Water-Based DrillingFluids Second Edition

API RP 13B-2 1998-02-00 Recommended Practice StandardProcedure for Field Testing Oil-Based DrillingFluids Third Edition

API RP 13C 1996-00-00 Recommended Practice for DrillingFluid Processing Systems Evaluation

API RP 13D 1995-00-00 Recommended Practice on the Rheologyand Hydraulics of Oil-Well Drilling Fluids

API RP 13E 1993-00-00 Recommended Practice for Shale ShakerScreen Cloth Designation

API RP 13G 1991-00-00 Recommended Practice StandardProcedure for Drilling Mud Report Form

API RP 13I 1995-00-00 Recommended Practice StandardProcedure for Laboratory Testing Drilling FluidsSupplement 1 - July 1996; Supplement 2 - June1997

API RP 13J 1996-00-00 Testing of Heavy BrinesAPI RP 13K 1996-02-00 Recommended Practice for Chemical

Analysis of Barite Second Edition; Errata4/25/1998

API BULL D14 1984-00-00 Statistical Analysis of Crude OilRecovery and Recovery Efficiency

API SPEC 14A 1994-07-01 Specification for Subsurface SafetyValve Equipment Ninth Edition; Errata - 1996

API RP 14B 1994-00-00 Design, Installation, Repair andOperation of Subsurface Safety Valve SystemsFourth Edition; ISO 10417; Errata - 1996

API RP 14C 1998-03-00 Recommended Practice for Analysis,Design, Installation, and Testing of BasicSurface Safety Systems for Offshore ProductionPlatforms Sixth Edition

API SPEC 14D 1994-00-00 Specification for Wellhead SurfaceSafety Valves and Underwater Safety Valves forOffshore Service

API RP 14E 1991-00-00 Recommended Practice for Design andInstallation of Offshore Production PlatformPiping Systems

API RP 14F 1999-06-00 Recommended Practice for Design andInstallation of Electrical Systems for Fixed andFloating Offshore Petroleum Facilities forUnclassified and Class I, Division 1 andDivision 2 Locations Fourth Edition

API RP 14G 1993-00-00 Recommended Practice for FirePrevention and Control on Open Type OffshoreProduction Platforms

API RP 14H 1994-07-01 Recommended Practice forInstallation, Maintenance and Repair of SurfaceSafety Valves and Underwater Safety Valves

Página 17


Offshore Fourth Edition; ISO 10419; Errata- 1996

API RP 14J 1993-00-00 Recommended Practice for Design andHazards Analysis for Offshore ProductionFacilities

API SPEC 15HR 1995-04-01 Specification for High PressureFiberglass Line Pipe Second Edition; Supplement1 August 19,1998

API SPEC 15LE 1995-00-00 Specification for Polyethylene LinePipe (PE)

API SPEC 15LR 1990-00-00 Specification for Low PressureFiberglass Line Pipe

API SPEC 15LT 1993-00-00 Specification for PVC Lined SteelTubular Goods

API RP 15TL4 1999-03-00 Recommended Practice for Care and Useof Fiberglass Tubulars Second Edition

API DR 16 1992-00-00 Analysis of Foods for BenzeneAPI BULL D16 1989-00-00 Suggested Procedure for Development

of Spill Prevention Control and CountermeasurePlans (To Assist Conformance to Requirements ofTitle 40, Code of Federal Regulations, Part112.)

API SPEC 16A 1997-12-00 Specification for Drill ThroughEquipment Second Edition

API SPEC 16C 1993-00-00 Specification for Choke and KillSystems

API SPEC 16D 1993-00-00 Specification for Control Systems forDrilling Well Control Equipment

API RP 16E 1990-00-00 Recommended Practice for Design ofControl Systems for Drilling Well ControlEquipment

API BULL 16J 1992-00-00 Bulletin on Comparison of MarineDrilling Riser Analyses First Edition; FormerlyBull 2J

API RP 16Q 1993-00-00 Recommended Practice for Design,Selection, Operation and Maintenance of MarineDrilling Riser Systems First Edition; FormerlyRP 2Q and RP 2K

API SPEC 16R 1997-01-00 Specification for Marine DrillingRiser Couplings First Edition

API RP 17A 1996-00-00 Recommended Practice for Design andOperation of Subsea Production Systems

API RP 17B 1998-07-01 Recommended Practice for FlexiblePipe Second Edition

API RP 17C 1991-07-01 Recommended Practice on TFL (ThroughFlowline) Systems First Edition

API SPEC 17D 1992-10-30 Specification for Subsea Wellhead andChristmas Tree Equipment First Edition;Supplement 1 - 1993; Supplement 2 - 1996

API SPEC 17E 1998-09-01 Specification for Subsea ProductionControl Umbilicals Second Edition; Errata8/24/98

API RP 17G 1995-01-01 Recommended Practice for Design andOperation of Completion/Workover Riser SystemsFirst Edition

API RP 17I 1996-08-00 Installation Guidelines for SubseaUmbilicals First Edition

API SPEC 17J 1996-12-00 Specification for Unbonded FlexiblePipe First Edition

API DR 21 1992-00-00 API Mineral Oil ReviewAPI RP 31A 1997-08-00 Standard Form for Hardcopy

Presentation of Downhole Well Log Data FirstEdition

Página 18


API RP 39 1998-05-00 Recommended Practices on Measuringthe Viscous Properties of a Cross-Linked Water-Based Fracturing Fluid Third Edition

API RP 40 1998-02-00 Recommended Practices for CoreAnalysis Second Edition

API RP 41 1995-02-01 Recommended Practice for PresentingPerformance Data on Cementing and HydraulicFracturing Equipment Second Edition

API RP 43 1991-01-00 Recommended Practices for Evaluationof Well Perforators Fifth Edition

API RP 45 1998-08-00 Recommended Practice for Analysis ofOilfield Waters Third Edition

API RP 50 1995-12-00 Natural Gas Processing PlantPractices for Protection of the EnvironmentSecond Edition

API RP 51 1995-09-00 Onshore Oil and Gas ProductionPractices for Protection of the EnvironmentSecond Edition

API RP 52 1995-07-01 Land Drilling Practices forProtection of the Environment Second Edition

API PUBL DR53 1996-11-00 Characterization of Exploration andProduction Associated Waste

API RP 53 1997-03-00 Blowout Prevention Equipment Systemsfor Drilling Wells Third Edition

API RP 54 1992-05-01 Recommended Practices forOccupational Safety for Oil and Gas WellDrilling and Servicing Operations Second Edition

API RP 55 1995-02-15 Recommended Practices for Oil and GasProducing and Gas Processing Plant OperationsInvolving Hydrogen Sulfide Second Edition

API RP 56 1995-12-00 Recommended Practices for TestingSand Used in Hydraulic Fracturing OperationsSecond Edition

API RP 58 1995-12-00 Recommended Practices for TestingSand Used in Gravel Packing Operations SecondEdition

API RP 60 1995-12-00 Recommended Practices for TestingHigh-Strength Proppants Used in HydraulicFracturing Operations Second Edition

API RP 63 1990-06-01 Recommended Practices for Evaluationof Polymers Used in Enhanced Oil RecoveryOperations First Edition

API RP 64 1991-07-01 Recommended Practices for DiverterSystems Equipment and Operations First Edition

API RP 66 1996-06-00 Recommended Practices for Explorationand Production Data Digital Interchange SecondEdition

API RP 67 1994-03-01 Recommended Practices for OilfieldExplosives Safety First Edition

API RP 68 1998-01-00 Recommended Practice for Oil and GasWell Servicing and Workover Operations InvolvingHydrogen Sulfide First Edition

API API RP 75 1998-07-31 Implementation Status Assessment 1997Summary Report to the American PetroleumInstitute Final Report

API RP 75 1998-07-00 Recommended Practices for Developmentof a Safety and Environmental Management Programfor Outer Continental Shelf (OCS) Operations andFacilities Second Edition

API DR 148 1997-12-00 Identification of Organic Toxicantsin Treated Refinery Effluents

API DR 218 1997-04-00 Pilot Study in Los Angeles to MeasurePersonal Ozone Exposures During Scripted

Página 19


Activities AppendicesAPI DR 220 1995-00-00 Potential BTEX Emissions from the

Nation's Triethylene Glycol Units in Oil andNatural Gas Facilities

API DR 224 1988-11-15 Review of EPA's Proposed Flare PlumeRise Procedure

API PUBL DR 225 1998-10-00 Remediation of a Fractured Clay TillUsing Air Flushing: Field Experiments atSarnia, Ontario

API PUBL 300 1991-00-00 Generation and Management of Wastesand Secondary Materials in the PetroleumRefining Industry: 1987-1988

API PUBL 301 1989-00-00 Aboveground Storage Tank SurveyAPI PUBL 302 1991-00-00 Waste Minimization in the Petroleum

Industry Source Reduction Recycle TreatmentDisposal a Compendium of Practices

API PUBL 303 1992-00-00 Generation and Management of Wastesand Secondary Materials

API PUBL 304 1991-00-00 Evaluation of RestorationAlternatives for Natural Resources Injured byOil Spills

API PUBL 305 1991-00-00 Protecting Agricultural Crops fromOzone Exposures Key Issues and Future ResearchDirections

API PUBL 306 1991-00-00 An Engineering Assessment ofVolumetric Methods of Leak Detection inAboveground Storage Tanks

API PUBL 307 1992-00-00 Engineering Assessment of AcousticMethods of Leak Detection in Aboveground StorageTanks

API PUBL 309 1992-00-00 Current Status and Research NeedsRelated to Biogenic Hydrocarbons

API PUBL 310 1997-11-00 Analysis of Refinery Screening DataAPI PUBL 311 1993-00-00 Environmental Design Considerations

for Petroleum Refining Crude Processing UnitsAPI PUBL 312 1990-00-00 Responding to Environmental Challenge

A Discussion Among People from Industry,Government and Environmental Groups

API PUBL 313 1993-00-00 (Withdrawn)Petroleum Emission FactorInformation Retrieval System (PEFIRS)

API PUBL 315 1993-00-00 Assessment of Tankfield Dike LiningMaterials and Methods

API PUBL 316 1995-00-00 Identifying and Measuring NonuseValues for Natural and Environmental Resources aCritical Review of the State of the Art

API PUBL 317 1993-00-00 Industry Experience with PollutionPrevention Programs

API PUBL 318 1983-00-00 (Withdrawn)Land Treatment Practicesin the Petroleum Industry

API PUBL 322 1994-00-00 Engineering Evaluation of AcousticMethods of Leak Detection in Aboveground StorageTanks

API PUBL 323 1994-00-00 Engineering Evaluation of VolumetricMethods of Leak Detection in Aboveground StorageTanks

API PUBL 324 1993-00-00 Generation and Management of ResidualMaterials Petroleum Refining Performance 1990Survey

API PUBL 325 1994-00-00 Evaluation of a Methodology for theDetection of Leaks in Aboveground Storage Tanks

API PUBL 326 1994-00-00 Cost Effectiveness of VOC and NOxEmission Control Measures

API PUBL 327 1994-00-00 Aboveground Storage Tank Standards: A

Página 20


TutorialAPI PUBL 328 1995-00-00 Laboratory Evaluation of Candidate

Liners for Secondary Containment of PetroleumProducts

API PUBL 329 1994-00-00 Generation and Management of ResidualMaterials Petroleum Refining Performance 1991Survey

API PUBL 331 1994-00-00 Environmental PerformanceIndicators: Methods for Measuring PollutionPrevention

API PUBL 332 1995-00-00 Comparison of Screening Values fromSelected Hydrocarbon Screening Instruments

API PUBL 333 1995-00-00 Generation and Management of ResidualMaterials

API PUBL 334 1996-00-00 Guide to Leak Detection forAboveground Storage Tanks

API PUBL 335 1996-07-00 (Withdrawn)Refinery MACT WorkshopJuly 11-12, 1996

API PUBL 336 1996-00-00 Management of Residual Materials:1994 Petroleum Refining Performance

API PUBL 337 1996-08-00 Development of Emission Factors forLeaks in Refinery Components in Heavy LiquidService

API PUBL 338 1997-02-00 (Withdrawn)Summary of Question andAnswer Sessions for the American PetroleumInstitute's Gasoline Distribution MACT Workshop

API PUBL 339 1997-06-00 Management of Residual Materials:1995 Petroleum Refining Performance

API PUBL 340 1997-10-00 Liquid Release Prevention andDetection Measures for Aboveground StorageFacilities

API PUBL 341 1998-02-00 Survey of Diked-Area Liner Use atAboveground Storage Tank Facilities

API PUBL 342 1998-05-00 Fugitive Emissions from EquipmentLeaks 1: Monitoring Manual

API PUBL 343 1998-05-00 Fugitive Emissions from EquipmentLeaks II: Calculation Procedures for PetroleumIndustry Facilities

API PUBL 344 1998-06-00 Critical Review of Source Samplingand Analysis Methodologies for CharacterizingOrganic Aerosol and Fine Particulate SourceEmission Profiles

API PUBL 345 1998-06-00 Management of Residual Materials:1996 - Petroleum Refining Performance

API PUBL 346 1998-11-00 Results of Range-Finding Testing ofLeak Detection and Leak Location Technologiesfor Underground Pipelines

API PUBL 347 1998-10-00 Hazardous Air Pollutant Emissionsfrom Gasoline Loading Operations at BulkGasoline Terminals

API PUBL 348 1998-08-00 Air Toxics Emission Factors forCombustion Sources Using Petroleum-Based Fuels- Volume 1 Development of Emission Factors UsingAPI/WSPA Approach

API DR 351 1996-00-00 Proceedings: Workshop to IdentifyPromising Technologies for the Treatment ofProduced Water Toxicity

API PUBL 351 1999-04-00 Overview of Soil Permeability TestMethods

API TR400 1993-00-00 Preliminary Study of the Effect ofToluene on Pregnancy of the Rat (InhalationExposure)

API TR401 1993-00-00 Toluene the Effect on Pregnancy ofthe Rat (Inhalation Exposure)

Página 21


API TR 402 1995-00-00 Tertiary-Amyl Methyl Ether (TAME)Toxicity to the Freshwater Alga SelenastrumCapricornutum

API TR 403 1995-00-00 Closed-Patch Repeated Insult DermalSensitization Study of Tertiary Amyl MethylEther (TAME) in Guinea Pigs (Buehler Method)

API TR 404 1995-00-00 Inhalation Oncogenicity Study ofCommercial Hexane in Rats and Mice Part I - RatsFinal Abridged Report

API TR 405 1995-00-00 Inhalation Oncogenicity Study ofCommercial Hexane in Rats and Mice Part II- Mice Final Abridged Report

API TR 406 1995-00-00 Tert-Amyl Methyl Ether (TAME) - AcuteToxicity to Daphnids (Daphnia Magna) UnderFlow- Through Conditions TSCA Guideline SectionMark 797.1300

API TR 407 1995-00-00 Tert-Amyl Methyl Ether (TAME) - AcuteToxicity to Mysid Shrimp (Mysidopsis Bahia)Under Static Renewal Conditions TSCA GuidelineSection Mark 797.1930

API TR 408 1995-00-00 Tert-Amyl Methyl Ether (TAME) - AcuteToxicity to Rainbow Trout (Oncorhynchus Mykiss)Under Flow-Through Conditions TSCA GuidelineSection Mark 797.1400

API TR 409 1995-00-00 Primary Skin Irritation Study InRabbits of: API 91-01 and PS-6 Unleaded TestGasolines (CAIS Abstract No. 42-2014)

API TR410 1996-12-00 Chromosome Aberrations in ChineseHamster Ovary (CHO) Cells Exposed to TertiaryAmyl Methyl Ether (TAME)

API TR411 1996-12-00 Chinese Hamster Ovary (CHO)/HGPRTMutation Assay of Tertiary Amyl Methyl Ether(TAME)

API TR 412 1998-04-00 A Range-Finding DevelopmentalInhalation Toxicity Study of Unleaded GasolineVapor Condensate in Rats and Mice Via Whole-BodyExposers

API TR 414 1998-04-00 An Inhalation Developmental ToxicityStudy of Unleaded Gasoline Vapor Condensate inthe Rat Via Whole-Body Exposure

API PUBL 421 1990-02-00 Monographs on Refinery EnvironmentalControl - Management of Water Discharges Designand Operation of Oil-Water Separators FirstEdition

API PUBL 422 1994-00-00 Groundwater Protection Programs forPetroleum Refining and Storage Facilities: AGuidance Document

API RP 500 1997-11-00 Recommended Practice forClassification of Locations for ElectricalInstallations at Petroleum Facilities Classifiedas Class I, Division 1 and Division 2 SecondEdition; Errata 8/17/98

API RP 505 1997-11-00 Recommended Practice forClassification of Locations for ElectricalInstallations at Petroleum Facilities Classifiedas Class I, Zone 0, Zone 1, and Zone 2 FirstEdition; Errata 8/17/98

API API 510 1997-06-00 Pressure Vessel Inspection Code:Maintenance Inspection, Rating, Repair, andAlteration Eighth Edition; Addendum 1 December1998; Addendum 1 Errata January 26,1999

API RP 520 PT I 1993-00-00 Sizing, Selection, and Installationof Pressure-Relieving Devices in Refineries PartI - Sizing and Selection

Página 22


API RP 520 PT II 1994-00-00 Sizing, Selection, and Installationof Pressure-Relieving Devices in Refineries PartII - Installation

API RP 521 1997-03-00 Guide for Pressure-Relieving andDepressuring Systems Fourth Edition; ErrataFebruary 15, 1999

API STD 526 1995-00-00 Flanged Steel Pressure Relief ValvesAPI STD 527 1991-00-00 Seat Tightness of Pressure Relief

ValvesAPI STD 530 1996-00-00 Calculation of Heater-Tube Thickness

in Petroleum RefineriesAPI RP 531M 1980-00-00 Measurement of Noise from Fired

Process HeatersAPI PUBL 534 1995-01-00 Heat Recovery Steam Generators First

Edition First EditionAPI PUBL 535 1995-07-00 Burners for Fired Heaters in General

Refinery Services First Edition First EditionAPI RP 536 1998-03-00 Post-Combustion NOx Control for Fired

Equipment in General Refinery Services FirstEdition

API RP 540 1999-04-00 Electrical Installations in PetroleumProcessing Plants Fourth Edition

API STD 541 1995-00-00 Form-Wound Squirrel Cage InductionMotors - 250 Horsepower and Larger

API STD 546 1997-06-00 Brushless Synchronous Machines - 500kVA and Larger Second Edition

API RP 551 1993-00-00 Process Measurement InstrumentationAPI RP 552 1994-10-00 Transmission Systems First EditionAPI RP 553 1998-09-00 Refinery Control Valves First EditionAPI RP 554 1995-09-00 Process Instrumentation and Control

First EditionAPI TP 555 1995-00-00 Process Analyzers First EditionAPI RP 556 1997-05-00 Instrumentation and Control Systems

for Fired Heaters and Steam Generators FirstEdition

API STD 560 1995-00-00 Fired Heaters for General RefineryServices

API 570 1998-10-00 Piping Inspection Code; Inspection,Repair, Alteration, and Rerating of In-ServicePiping Systems Second Edition

API RP 572 1992-00-00 Inspection of Pressure VesselsAPI RP 573 1991-00-00 Inspection of Fired Boilers and

HeatersAPI RP 574 1998-06-00 Inspection Practices for Piping

System Components Second EditionAPI RP 575 1995-00-00 Inspection of Atmospheric and Low-

Pressure Storage TanksAPI RP 576 1992-00-00 Inspection of Pressure-Relieving

Devices First EditionAPI RP 578 1999-05-00 Material Verification Program for New

and Existing Alloy Piping Systems First EditionAPI STD 589 1998-07-00 Fire Test for Evaluation of Valve

Stem Packing Second EditionAPI STD 590 1985-00-00 Steel Line BlanksAPI RP 591 1998-02-00 User Acceptance of Refinery Valves

Second EditionAPI STD 594 1997-11-00 Check Valves: Wafer, Wafer-Lug, and

Double Flanged Type Fifth EditionAPI STD 598 1996-10-00 Valve Inspection and Testing Seventh

Edition; Errata August 22,1997API STD 599 1994-00-00 Metal Plug Valves - Flanged and

Welding Ends Fourth EditionAPI STD 600 1997-02-00 Steel Gate Valves - Flanged and Butt-

Página 23


Welding Ends, Bolted and Pressure Seal BonnetsTenth Edition; Errata -June 5, 1998

API STD 602 1998-10-00 Compact Steel Gate Valves - Flanged,Threaded, Welding, and Extended-Body EndsSeventh Edition

API STD 603 1991-00-00 Class 150, Cast, Corrosion-Resistant, Flanged-End Gate Valves Fifth EditionR(1996)

API STD 607 1993-05-00 Fire Test for Soft-Seated Quarter-Turn Valves Fourth Edition

API STD 608 1995-00-00 Metal Ball Valves - Flanged,Threaded, and Welding End

API STD 609 1997-05-00 Butterfly Valves: Double Flanged,Lug- and Wafer-Type Fifth Edition

API STD 610 1995-00-00 Centrifugal Pumps for Petroleum,Heavy Duty Chemical, and Gas Industry Services

API STD 611 1997-06-00 General-Purpose Steam Turbines forPetroleum, Chemical, and Gas Industry ServicesFourth Edition

API STD 612 1995-00-00 Special-Purpose Steam Turbines forPetroleum, Chemical, and Gas Industry Services

API STD 613 1995-00-00 Special Purpose Gear Units forPetroleum, Chemical, and Gas Industry Services

API STD 614 1999-04-00 Lubrication, Shaft-Sealing, andControl-Oil Systems and Auxiliaries forPetroleum, Chemical and Gas Industry ServicesFourth Edition

API STD 616 1998-08-00 Gas Turbines for Petroleum,Chemical, and Gas Industry Services FourthEdition

API STD 617 1995-00-00 Centrifugal Compressors forPetroleum, Chemical, and Gas Service Industries

API STD 618 1995-00-00 Reciprocating Compressors forPetroleum, Chemical, and Gas Industry Services

API STD 619 1997-06-00 Rotary Type Positive DisplacementCompressors for Petroleum, Chemical, and GasIndustry Services Third Edition

API STD 620 1996-02-00 Design and Construction of Large,Welded, Low-Pressure Storage Tanks NinthEdition; Addendum 1-December 1996; AdditionalPages for Addendum 1-February 1997; Addendum 2-December 1997; Addendum 3-December 1998

API STD 650 1998-11-00 Welded Steel Tanks for Oil StorageTenth Edition

API RP 651 1997-12-00 Cathodic Protection of AbovegroundPetroleum Storage Tanks Second Edition

API RP 652 1997-12-00 Lining of Aboveground PetroleumStorage Tank Bottoms Second Edition

API STD 653 1995-12-00 Tank Inspection, Repair, Alteration,and Reconstruction Second Edition; ErrataFebruary 1996; Errata May 1996; Follow Up toErrata May 1996; Addendum 1-December 1996;Addendum 2-December 1997; Addendum 3-December1998

API STD 660 1993-00-00 Shell-and-Tube Heat Exchangers forGeneral Refinery Services

API STD 661 1997-11-00 Air-Cooled Heat Exchangers forGeneral Refinery Services Fourth Edition

API STD 662 1995-00-00 Plate Heat Exchangers for GeneralRefinery Services

API STD 670 1993-00-00 Vibration, Axial Position, andBearing Temperature Monitoring Systems ThirdEdition; Replaces STD 678

API STD 671 1998-10-00 Special-Purpose Couplings forPágina 24


Petroleum, Chemical, and Gas Industry ServicesThird Edition

API STD 672 1996-00-00 Packaged, Integrally GearedCentrifugal Air Compressors for Petroleum,Chemical, and Gas Industry Services

API STD 674 1995-00-00 Positive Displacement Pumps- Reciprocating

API STD 675 1994-00-00 Positive Displacement Pumps- Controlled Volume

API STD 676 1994-00-00 Positive Displacement Pumps - RotaryAPI STD 677 1997-07-00 General Purpose Gear Units for

Petroleum, Chemical, and Gas Industry ServicesSecond Edition

API STD 681 1996-02-00 Liquid Ring Vacuum Pumps andCompressors for Petroleum, Chemical, and GasIndustry Services First Edition

API STD 682 1994-00-00 Shaft Sealing Systems for Centrifugaland Rotary Pumps

API RP 683 1993-00-00 Quality Improvement Manual forMechanical Equipment in Petroleum, Chemical, andGas Industries

API PUBL 684 1996-02-00 Tutorial on the API StandardParagraphs Covering Rotor Dynamics andBalancing: an Introduction to Lateral Criticaland Train Torsional Analysis and Rotor BalancingFirst Edition

API RP 686 1996-04-00 Recommended Practices for MachineryInstallation and Installation Design FirstEdition

API RP 750 1990-01-00 Management of Process Hazards FirstEdition; Erratum - 1990

API RP 751 1999-02-00 Safe Operation of Hydrofluoric AcidAlkylation Units Second Edition

API RP 752 1995-05-00 Management of Hazards Associated withLocation of Process Plant Buildings CMAManager's Guide; First Edition; Errata - 1995

API PUBL 760 1998-06-00 Model Risk Management Plan Guidancefor Petroleum Refineries Guidance in Complyingwith EPA's RMP Rule (40 Code of FederalRegulations, Part 68) Developments: June 1998 toJune 1999

API PUBL 761 1998-06-00 Model Risk Management Plan Guidancefor Exploration and Production (E&P) FacilitiesGuidance in Complying with EPA's RMP Rule (40Code of Federal Regulations, Part 68) SecondEdition - Developments: June 1998 to June 1999

API PUBL 850 1997-11-00 API Standards 620, 650, and 653Interpretations - Tank Construction and In-Service Inspection Answers to TechnicalInquiries; First Edition

API PUBL 910 1997-11-00 Digest of State Boiler, PressureVessel, Piping and Aboveground Storage TankRules and Regulations Eighth Edition

API RP 920 1990-00-00 Prevention of Brittle Fracture ofPressure Vessels

API RP 936 1996-10-00 Refractory Installation QualityControl Guidelines-Inspection and TestingMonolithic Refractory Linings and MaterialsFirst Edition

API PUBL 937 1996-00-00 Evaluation of Design Criteria forStorage Tanks with Frangible Roof Joints

API PUBL 938 1996-00-00 Experimental Study of Causes andRepair of Cracking of 1 1/4Cr- 1/2Mo SteelEquipment

Página 25


API PUBL 939 1994-00-00 Research Report on Characterizationand Monitoring of Cracking in Wet H2S Service

API RP 941 1997-01-00 Steels for Hydrogen Service atElevated Temperatures and Pressures in PetroleumRefineries and Petrochemical Plants FifthEdition; Errata October - 1997; Supplement1-1998

API RP 945 1997-10-00 Avoiding Environmental Cracking inAmine Units Second Edition

API PUBL 959 1982-00-00 Characterization Study of TemperEmbrittlement of Chromium-Molybdenum Steels

API RP 1004 1988-00-00 Bottom Loading and Vapor Recovery forMC-306 Tank Motor Vehicles Seventh Edition (R1995)

API RP 1102 1993-00-00 Steel Pipelines Crossing Railroadsand Highways

API STD 1104 1994-00-00 Welding of Pipelines and RelatedFacilities

API RP 1107 1991-00-00 Pipeline Maintenance WeldingPractices

API RP 1109 1993-00-00 Marking Liquid Petroleum PipelineFacilities

API RP 1110 1997-03-00 Pressure Testing of Liquid PetroleumPipelines Fourth Edition

API RP 1111 1999-07-00 Design, Construction, Operation, andMaintenance of Offshore Hydrocarbon Pipelines(Limit State Design) Third Edition

API RP 1112 1997-11-00 Developing a Highway EmergencyResponse Plan for Incidents Involving HazardousMaterials Third Edition

API PUBL 1113 1993-00-00 Developing a Pipeline SupervisoryControl Center Second Edition

API RP 1114 1994-00-00 Design of Solution-Minded UndergroundStorage Facilities

API API 1115 1994-00-00 Operation of Solution-MinedUnderground Storage Facilities First Edition

API RP 1117 1996-00-00 Movement of In-Service PipelinesAPI RP 1118 1991-00-00 Training and Qualification of Liquid

Pipeline ControllersAPI RP 1119 1991-00-00 Training and Qualification of Liquid

Pipeline OperatorsAPI RP 1120 1992-00-00 Training and Qualification of Liquid

Pipeline Maintenance PersonnelAPI RP 1123 1996-00-00 Development of Public Awareness

Programs by Hazardous Liquid Pipeline OperatorsAPI RP 1124 1991-00-00 Ship, Barge, and Terminal Hydrocarbon

Vapor Collection ManifoldsAPI RP 1125 1991-02-00 Overfill Control Systems for Tank

Barges First EditionAPI RP 1127 1993-00-00 Marine Vapor Control Training

GuidelinesAPI RP 1129 1996-00-00 Assurance of Hazardous Liquid Pipline

System IntegrityAPI PUBL 1130 1995-10-00 Computational Pipeline Monitoring

First EditionAPI PUBL 1132 1994-00-00 Effects of Oxygenated Fuels and

Reformulated Diesel Fuels on Elastomers andPolymers in Pipeline/Terminal Components

API RP 1139 1993-00-00 (Withdrawn)Training Guidelines forTank Ship Personnel

API RP 1140 1991-00-00 (Withdrawn)Guidelines for DevelopingBridge Management Teams

API RP 1141 1994-00-00 Guidelines for Confined Space Entry

Página 26


on Board Tank Ships in the Petroleum IndustryAPI PUBL 1149 1993-11-00 Pipeline Variable Uncertainties and

Their Effects on Leak DetectabilityAPI PUBL 1155 1995-02-00 Evaluation Methodology for Software

Based Leak Detection Systems First EditionAPI PUBL 1156 1997-11-00 Effects of Smooth and Rock Dents on

Liquid Petroleum Pipelines First EditionAPI PUBL 1157 1998-10-00 Hydrostatic Test Water Treatment and

Disposal Options for Liquid Pipeline SystemsFirst Edition

API PUBL 1158 1999-01-07 Analysis of DOT Reportable Incidentsfor Hazardous Liquid Pipelines, 1986 Through1996

API PUBL 1220 1998-09-00 Guidelines for Evaluating Vendors andTraining Programs

API PUBL 1509 1996-12-00 Engine Oil Licensing andCertification System Fourteenth Edition;Addendum 1 December 1998; Technical Bulletin 4July 6, 1999

API PUBL 1509C 1996-09-00 Guide to the API Engine Oil Licensingand Certification System First Edition

API STD 1512 1995-10-00 Petroleum Test LaboratoryAccreditation Program First Edition

API PUBL 1520 Directory of Licensees: API Engine OilLicensing and Certification System IncludingBrand Products Authorized to Display the EngineOil Licensing and Certification Symbols IndexEntry Only - Most Current Listing Available onAPI Website

API RP 1525 1997-06-00 Bulk Oil Testing, Handling, andStorage Guidelines First Edition

API STD 1529 1998-05-00 Aviation Fueling Hose Fifth EditonAPI STD 1542 1996-11-00 Airport Equipment Marking for Fuel

Identification Sixth EditionAPI PUBL 1551 1996-00-00 Motor Oil GuideAPI PUBL 1560 1995-00-00 Lubricant Service Designations for

Automotive Manual Transmissions, ManualTransaxles, and Axles

API PUBL 1571 1996-00-00 Diesel Fuel Questions & Answers forHighway and Off-Highway Use

API PUBL 1577 1994-00-00 Winter Diesel Questions & AnswersAPI PUBL 1580 1996-00-00 Gasoline for Your Car Questions

& AnswersAPI PUBL 1581 1989-00-00 Specifications and Qualification

Procedures for Aviation Jet Fuel Filter/Separators Third Edition; (R 1994) Addendum- 1995

API STD 1584 1994-00-00 Four-Inch Hydrant System Componentsand Arrangements

API PUBL 1593 1992-00-00 Gasoline Marketing in the UnitedStates Today

API RP 1604 1996-00-00 Closure of Underground PetroleumStorage Tanks

API PUBL 1612 1996-11-00 Guidance Document for the Dischargeof Petroleum Distribution Terminal Effluents toPublicly Owned Treatment Works First Edition

API RP 1615 1996-00-00 Installation of Underground PetroleumStorage Systems

API RP 1621 1993-00-00 Bulk Liquid Stock Control at RetailOutlets

API RP 1626 1985-00-00 Storing and Handling Ethanol andGasoline-Ethanol Blends at DistributionTerminals and Service Stations

Página 27


API RP 1627 1986-00-00 Storage and Handling of Gasoline-Methanol/Cosolvent Blends at DistributionTerminals and Service Stations (R 1993)

API PUBL 1628 1996-00-00 Guide to the Assessment andRemediation of Underground Petroleum Releases

API PUBL 1628A 1996-00-00 Natural Attenuation ProcessesAPI PUBL 1628B 1996-00-00 Risk-Based Decision MakingAPI PUBL 1628C 1996-00-00 Optimization of Hydrocarbon RecoveryAPI PUBL 1628D 1996-00-00 In-Situ Air SpargingAPI PUBL 1628E 1996-00-00 Operation and Maintenance

Considerations for Hydrocarbon RemediationSystems

API PUBL 1629 1993-00-00 Guide for Assessing and RemediatingPetroleum Hydrocarbons in Soils

API RP 1631 1997-10-00 Interior Lining of UndergroundStorage Tanks Fourth Edition

API RP 1632 1996-00-00 Cathodic Protection of UndergroundPetroleum Storage Tanks and Piping Systems

API RP 1633 1992-00-00 Handling Water Discharges fromAutomotive Service Facilities Located atPetroleum Marketing Operations

API PUBL 1634 1994-00-00 Used Oil State Law DigestAPI RP 1637 1995-09-00 Using the API Color-Symbol System to

Mark Equipment and Vehicles for ProductIdentification at Service Stations andDistribution Terminals Second Edition;Supplement

API PUBL 1638 1994-00-00 Waste Management Practices forPetroleum Marketing Facilities

API PUBL 1642 1996-00-00 Alcohols, Ethers and Gasoline-Alcoholand -Ether Blends A Report on Fire-SafetyConsiderations at Petroleum Marketing Facilities

API RP 1650 1989-00-00 Set of Six API Recommended Practiceson Underground Petroleum Storage Tank ManagementIndex Entry Only

API PUBL 1663C 1995-00-00 Underground Storage Tank InstallationExhibit Book Underground Storage TankInstallation Workbook

API PUBL 1663E 1995-00-00 Underground Storage Tank RemovalExhibit Book Underground Storage Tank RemovalWorkbook

API PUBL 1669 1994-00-00 Results of a Retail Gasoline Outletand Commercial Parking Lot Storm Water RunoffStudy

API PUBL 1673 1998-05-00 Compilation of Air Emission Factorsfor Petroleum Distribution and Retail MarketingFacilities First Edition



API 1994-04-26 Proceedings of the 1994 API PipelineConference Errata - June 1995

API 1997-07-00 Final Report 1996 American PetroleumInstitute/National Petroleum RefinersAssociation Survey of Refining Operations andProduct Quality

API STD 2000 1998-04-00 Venting Atmospheric and Low-PressureStorage Tanks Nonrefrigerated and RefrigeratedFifth Edition

API RP 2001 1998-06-00 Fire Protection in Refineries SeventhEdition

API RP 2003 1998-09-00 Protection Against Ignitions Arising

Página 28


out of Static, Lightning, and Stray CurrentsSixth Edition

API RP 2005 1996-09-00 Service Station Safety SixthEdition; Supplement - 1996

API PUBL 2009 1995-00-00 Safe Welding, Cutting, and Other HotWork Practices in Refineries, Gas Plants, andPetrochemical Plants

API PUBL 2013 1991-00-00 Cleaning Mobile Tanks in Flammable orCombustible Liquid Service

API PUBL 2015 1994-00-00 Safe Entry and Cleaning of PetroleumStorage Tanks

API PUBL 2021 1991-00-00 Fighting Fires in and AroundFlammable and Combustible Liquid AtmosphericStorage Tanks

API PUBL 2021A 1998-07-00 Interim Study - Prevention andSuppression of Fires in Large AbovegroundAtmospheric Storage Tanks First Edition

API PUBL 2026 1998-04-00 Safe Access/Egress Involving FloatingRoofs of Storage Tanks in Petroleum ServiceSecond Edition

API PUBL 2027 1988-00-00 Ignition Hazards Involved in AbrasiveBlasting of Atmospheric Storage Tanks inHydrocarbon Service

API PUBL 2028 1991-00-00 Flame Arresters in Piping SystemsAPI PUBL 2030 1998-08-00 Application of Water Spray Systems

for Fire Protection in the Petroleum IndustrySecond Edition

API PUBL 2031 1991-00-00 Combustible Gas Detector Systems andEnvironmental and Operational FactorsInfluencing Their Performance

API PUBL 2200 1994-00-00 Repairing Crude Oil, LiquefiedPetroleum Gas, and Product Pipelines

API RP 2201 1995-00-00 Procedures for Welding or Hot Tappingon Equipment in Service

API PUBL 2202 1991-00-00 Dismantling and Disposing of Steelfrom Aboveground Leaded Gasoline Storage Tanks

API PUBL 2207 1998-09-00 Preparing Tank Bottoms for Hot WorkFifth Edition; Errata June 1999

API PUBL 2214 1989-00-00 Spark Ignition Properties of HandTools

API PUBL 2216 1991-01-00 Ignition Risk of Hydrocarbon Vaporsby Hot Surfaces in the Open Air Second Edition

API PUBL 2217A 1997-09-00 Guidelines for Work in Inert ConfinedSpaces in the Petroleum Industry Second Edition

API PUBL 2219 1999-03-00 Safe Operation of Vacuum Trucks inPetroleum Service Second Edition

API RP 2220 1991-00-00 Improving Owner and Contractor SafetyPerformance

API RP 2221 1996-00-00 Implementing a Contractor Safety andHealth Program

API PUBL 2230 1994-04-29 Static Electricity Research ProjectAPI RP 2350 1996-01-00 Overfill Protection for Storage Tanks

in Petroleum Facilities Second EditionAPI PUBL 2375 1997-09-00 1996 Summary of U.S. Occupational

Injuries, Illnesses, and Fatalities in thePetroleum Industry; as Reported to the AmericanPetroleum Institute Covering U.S. Petroleum andPetrochemical Operations of Reporting Companiesfor 1996

API PUBL 2376 1998-04-00 1997 Summary of U.S OccupationalInjuries, Illnesses, and Fatalities in thePetroleum Industry; As Reported to the AmericanPetroleum Institute; Covering U.S. Petroleum and

Página 29


Petrochemical Operations of Reporting Companiesfor 1997

API PUBL 2377 1999-04-00 1998 Summary of U.S. OccupationalInjuries, Illnesses and Fatalities in thePetroleum Industry; As Reported to the AmericanPetroleum Institute; Covering U.S. Petroleum andPetrochemical Operations of Reporting Companiesfor 1998

API BULL 2509B 1961-00-00 Shop Testing of Automatic LiquidLevel Gages Information Sheet - February 1972R(1997)

API STD 2510 1995-05-00 Design and Construction of LPGInstallations Seventh Edition

API PUBL 2510A 1996-12-00 Fire-Protection Considerations forthe Design and Operation of Liquefied PetroleumGas (LPG) Storage Facilities Second Edition

API PUBL 2514A 1981-09-00 Atmospheric Hydrocarbon Emissionsfrom Marine Vessel Transfer Operations SecondEdition

API BULL 2516 1962-00-00 Evaporation Loss from Low-PressureTanks (R 1993)

API PUBL 2517D 1993-00-00 Documentation File for APIPublication 2517 - Evaporation Loss fromExternal Floating-Roof Tanks

API PUBL 2519D 1993-00-00 Documentation File for APIPublication 2519 - Evaporation Loss fromInternal Floating-Roof Tanks

API BULL 2521 1966-00-00 Use of Pressure-Vacuum Vent Valvesfor Atmospheric Pressure Tanks to ReduceEvaporation Loss (R 1993)

API PUBL 2524 1992-07-00 Impact Assessment of New Data on theValidity of American Petroleum Institute MarineTransfer Operation Emission Factors

API PUBL 2525 1992-00-00 Review of Air Toxics EmissionCalculations from Storage Tanks (Phase I) AirToxic Emissions Calculation Validation Program:Analysis of Crude Oil and Refined ProductSamples and Comparison of Vapor Composition toModel Predictions (Phase II) (Replaced by MPMS14.3.1 Through MPMS 14.3.4)

API STD 2540 VOL III 1980-00-00 See API MPMS 11.1 Vol IIIAPI STD 2540 VOL IV 1980-00-00 See API MPMS 11.1 Vol IVAPI STD 2540 VOL VI 1980-00-00 See API MPMS 11.1 Vol VIAPI STD 2540 VOL IX 1980-00-00 See API MPMS Volume IXAPI STD 2540 VOL X 1980-00-00 See API MPMS 11.1 Vol XAPI STD 2540 VOL XI/XII 1982-00-00 See API MPMS 11.1 Vol XI/XIIAPI STD 2540 VOL XIII 1982-00-00 See MPMS 11.1 Vol XIIIAPI STD 2540 VOL XIV 1982-00-00 See API MPMS 11.1 Vol XIV

API STD 2551 1965-00-00 Standard Method for Measurement andCalibration of Horizontal Tanks ASTM D1410R(1997)

API STD 2552 1965-00-00 Measurement and Calibration ofSpheres and Spheroids, Method for ASTM D1408R(1997)

API STD 2554 1965-00-00 Measurement and Calibration of TankCars, Method for ASTM D1409 R(1997)

API STD 2555 1966-00-00 Method for Liquid Calibration ofTanks ASTM D1406-65 R(1997)

API RP 2556 1993-00-00 Correcting Gauge Tables forIncrustation

API PUBL 2557 1993-00-00 Vapor Collection and Control Optionsfor Storage and Transfer Operations in thePetroleum Industry

API PUBL 2558 1993-00-00 Wind Tunnel Testing of External

Página 30


Floating-Roof Storage TanksAPI PUBL 2564 1980-00-00 See MPMS 15

API STD 2610 1994-00-00 Design, Construction, Operation,Maintenance, and Inspection of Terminal & TankFacilities

API PUBL 4261 1988-00-00 Alcohols and Ethers a TechnicalAssessment of Their Application as Fuels andFuel Components

API PUBL 4262 1990-00-00 Methanol Vehicle EmissionsAPI PUBL 4296 1978-05-00 Analysis of Refinery Wastewaters for

the EPA Priority Pollutants Interim ReportAPI PUBL 4297 1978-00-00 (Withdrawn)Fate and Effects of

Polynuclear Aromatic Hydrocarbons in the AquaticEnvironment

API PUBL 4311 1979-00-00 Nox Emissions from Petroleum IndustryOperations

API PUBL 4317 1979-00-00 (Withdrawn)Underground Movement ofGasoline on Groundwater and Enhanced Recovery bySurfactants (Reprinted 1986)

API PUBL 4322 VOL 1 1980-00-00 (Withdrawn)Volume 1-FugitiveHydrocarbon Emissions from Petroleum ProductionOperations

API PUBL 4322 VOL 2 1980-00-00 (Withdrawn)Volume 2-FugitiveHydrocarbon Emissions from Petroleum ProductionOperations

API PUBL 4346 1981-12-00 Refinery Wastewater PriorityPollutant Study-Sample Analysis and Evaluationof Data

API PUBL 4365 1983-06-00 Characterization of ParticulateEmissions from Refinery Process Heaters andBoilers

API PUBL 4367 1983-00-00 (Withdrawn)Groundwater Monitoring andSample Bias

API PUBL 4369 VOL 1 1983-00-00 (Withdrawn)Treatment Technology forRemoval of Dissolved Gasoline Components fromGround Water Volume 1

API PUBL 4369 VOL 2 1983-00-00 (Withdrawn)Treatment Technology forRemoval of Dissolved Gasoline Components fromGround Water Volume 2

API PUBL 4379 1984-00-00 Land Treatability of Appendix VIIIConstituents Present in Petroleum IndustryWastes

API PUBL 4381 1983-00-00 Evaluation of New Versions of theEmpirical Kinetic Modeling Approach (EKMA)Development of a Statistical Methodology forControl Strategy Analysis

API PUBL 4382 1984-00-00 New Approaches to Quantification ofPerception of Scenic Beauty and Visibility

API PUBL 4388 1985-00-00 Land Treatment Safe and EfficientDisposal of Petroleum Waste

API PUBL 4390 1985-04-00 (Withdrawn)Test Results of SurfactantEnhanced Gasoline Recovery in a Large-ScaleModel Aquifer

API PUBL 4391 1985-00-00 (Withdrawn)Biomonitoring; Techniquesfor Measuring the Biological Effects of LiquidEffluents

API PUBL 4394 1985-00-00 (Withdrawn)Detection of Hydrocarbonsin Groundwater by Analysis of Shallow Soil Gas/Vapor

API PUBL 4395 1985-00-00 Laboratory Study on Solubilities ofPetroleum Hydrocarbons in Groundwater

API PUBL 4396 1985-00-00 (Withdrawn)Protecting Groundwater;What We've Learned Through Research

API PUBL 4397 1985-06-00 Chronic Effects of Drilling FluidsDischarged to the Marine Environment

Página 31


API PUBL 4399 1985-03-00 Methods of Storage, Transportation,and Handling of Drilling Fluid Samples

API PUBL 4401 1985-07-00 (Withdrawn)Applicability of SingleSpecies Bioassay for Estimating the Effects of aRefinery Effluent on an Estuarine Environment

API PUBL 4405 1985-00-00 (Withdrawn)Field Evaluation of WellFlushing Procedures

API PUBL 4407 1985-00-00 (Withdrawn)Rehabilitating Oiled SeaBirds: A Field Manual

API PUBL 4410 1985-00-00 (Withdrawn)Subsurface Venting ofHydrocarbon Vapors from an Underground Aquifier

API PUBL 4411 1985-00-00 Effect of Prudhoe Bay Crude Oil onthe Homing of Coho Salmon in Marine Waters

API PUBL 4412 1985-00-00 Oil Effects on Spawning Behavior andReproduction in Pacific Herring (Clupea HarengusPallasi)

API PUBL 4415 1985-00-00 Literature Survey: Unassisted NaturalMechanisms to Reduce Concentrations of SolubleGasoline Components

API PUBL 4419 1985-00-00 Review of Published Odor and TasteThreshold Values of Soluble Gasoline Components

API PUBL 4421 1986-00-00 Plume Rise Research for RefineryFacilities

API PUBL 4422 1986-00-00 (Withdrawn)Cost Model for SelectedTechnologies for Removal of Gasoline Componentsfrom Groundwater

API PUBL 4423 1986-00-00 Tracer Study Conducted to AcquireData for Evaluation of Air Quality DispersionModels; Errata

API PUBL 4425 1986-00-00 (Withdrawn)Role of ChemicalDispersants in Oil Spill Control

API PUBL 4426 1977-00-00 (Withdrawn)Bacterial Growth in andPenetration of Consolidated and UnconsolidatedSands Containing Gasoline (Reprinted 1986)

API PUBL 4427 1975-00-00 Beneficial Stimulation of BacterialActivity in Ground Waters Containing PetroleumProducts (Reprinted 1986)

API PUBL 4428 1982-00-00 (Withdrawn)Enhancing the MicrobialDegradation of Underground Gasoline byIncreasing Available Oxygen (Reprinted 1986)

API PUBL 4429 1980-00-00 (Withdrawn)Examination of Venting forRemoval of Gasoline Vapors from ContaminatedSoil (Reprinted 1986)

API PUBL 4430 1978-00-00 Field Application of SubsurfaceBiodegradation of Gasoline in a Sand Formation(Reprinted 1986)

API PUBL 4431 1984-00-00 (Withdrawn)Forced Venting to RemoveGasoline Vapor from a Large-Scale Model Aquifer(Reprinted 1986)

API PUBL 4434 1982-00-00 Review of Ground-Water Models(Reprinted 1986)

API PUBL 4435 1985-00-00 (Withdrawn)Oil Spill Cleanup: Optionsfor Minimizing Adverse Ecological Impacts

API PUBL 4438 1986-00-00 Underwater Drilling - Measurement ofSound Levels and Their Effects on Belukha Whales

API PUBL 4439 1985-00-00 Berichte Research Report 250-1Exposure Data on C7 and C8 Aromatics DuringHandling and Production of Motor Gasolines

API PUBL 4440 1986-00-00 Tidal Area Dispersant Project Fateand Effects of Chemically Dispersed Oil in theNearshore Benthic Environment

API PUBL 4441 1985-00-00 Toxicity of Dispersed and UndispersedPrudhoe Bay Crude Oil Fractions to Shrimp,Fish, and Their Larvae

Página 32


API PUBL 4442 1986-00-00 (Withdrawn)Laboratory Evaluation ofSeven-Day Fathead Minnow and CeriodaphniaChronic Toxicity Tests

API PUBL 4443 1986-00-00 Effect of Suspended Solids onBioavailability of Petroleum Refinery EffluentChemicals

API PUBL 4445 1987-00-00 Effects of Crude Oil and ChemicallyDispersed Oil on Chemoreception and Homing inPacific Salmon

API PUBL 4447 1986-00-00 Saving Oiled SeabirdsAPI PUBL 4448 1987-00-00 (Withdrawn)Field Study of Enhanced

Subsurface Biodegradation of Hydrocarbons UsingHydrogen Peroxide as an Oxygen Source

API PUBL 4450 1987-00-00 (Withdrawn)Developing Criteria forAdvance Planning for Dispersant Use

API PUBL 4451 1987-00-00 Assessing Natural Resource Damagesfrom Hazardous Substances: An Examination ofExisting Assessment Approaches

API PUBL 4452 1987-00-00 1987 Oil Spill ConferenceAPI PUBL 4453 1987-00-00 Effects of Airgun Energy Releases on

the Northern AnchovyAPI PUBL 4455 1987-00-00 Land Treatability of Appendix VIII

Constituents Present in Petroleum RefineryWastes: Laboratory and Modeling Studies

API PUBL 4456 1987-00-00 Aerosol Formation, and SubsequentTransformation and Dispersion, During AccidentalReleases of Chemicals

API PUBL 4457 1987-00-00 API Evaluation of Urban DispersionModels with the St. Louis Raps Data Base

API PUBL 4459 1987-00-00 Surface Roughness Effects on Heavier-Than-Air Gas Diffusion

API PUBL 4460 1987-00-00 Effects of a Dispersed andUndispersed Crude Oil on Mangroves, Seagrasssesand Corals

API PUBL 4461 1988-00-00 Development and Evaluation of theOCD/API Model

API PUBL 4465 1988-00-00 Evaluation of Treatment Technologiesfor Listed Petroleum Refinery Wastes

API PUBL 4466 1988-00-00 Field Studies on the ReproductiveEffects of Oil and Emulsion on Marine Birds

API PUBL 4468 1988-00-00 (Withdrawn)Fathead Minnow 7-DayTest: Round Robin Study Intra- andInterlaboratory Study to Determine theReproducibility of the Seven-Day Fathead MinnowLarval Survival and Growth Test

API PUBL 4469 1988-00-00 Sorption/Desorption of SolublePetroleum Constituents by Materials Used inMonitoring Wells

API PUBL 4471 1988-00-00 Treatment System for the Reduction ofAromatic Hydrocarbons and Ether Concentrationsin Groundwater

API PUBL 4472 1989-01-00 Fate and Effects of Produced WaterDischarges in Nearshore Marine Waters

API PUBL 4473 1989-00-00 Bioaccumulation of PolycyclicAromatic Hydrocarbons and Metals in EstuarineOrganisms

API PUBL 4474 1988-00-00 Phase Separated HydrocarbonContaminant Modeling for Corrective Action

API PUBL 4475 1989-00-00 Rehabilitation of Groundwater:Removal of Soluble Petroleum ConstituentsThrough Soil Application

API PUBL 4476 1989-00-00 Hydrogeologic Database for GroundWater Modeling

API PUBL 4477 1988-00-00 Acute Exposure to Methanol in Fuels:

Página 33


A Prediction of Ingestion Incidence and ToxicityAPI PUBL 4478 1989-00-00 Rapid Test for Dispersant

Effectiveness at Oil Spill SitesAPI PUBL 4479 1989-00-00 Proceedings 1989 Oil Spill Conference

Prevention, Behavior, Control, CleanupAPI PUBL 4480 1989-09-00 Fate and Effects of Drilling Fluid

and Cutting Discharges in Shallow, NearshoreWaters

API PUBL 4481 1989-03-00 (Withdrawn)Rapid Bioassay Proceduresfor Drilling Fluids

API PUBL 4482 VOL II 1989-00-00 Species Tolerance for NPDES BioassaysVolume II -- Marine Species

API PUBL 4483 VOL I 1989-00-00 Species Tolerance for NPDES BioassaysVolume I -- Freshwater Species

API PUBL 4484 VOL I 1989-00-00 Monitoring Near Refineries forAirborne Chemicals on the SARA Title III Section313 List Volume I Validated Ambient AirConcentrations Around Three Refineries

API PUBL 4485 1989-00-00 Effects of Offshore PetroleumOperations on Cold Water Marine Mammals: ALiterature Review Replaces PUBL 4370

API PUBL 4486 1989-00-00 Evaluation of the US EPA ProposedOzone Precursor Point Source Screening TechniqueReport on Task 2 of the Comprehensive EvaluationPlan

API PUBL 4488 1988-00-00 Preliminary Evaluation of the US EPAProposed Ozone Precursor Point Source ScreeningTechnique Report on Task 1 of the ComprehensiveEvaluation Plan

API PUBL 4489 1989-00-00 (Withdrawn)Assessment of theAdaptability of the API Onboard Refueling VaporRecovery System to the Current VehiclePopulation

API PUBL 4490 1989-00-00 Measuring Natural Resource Damages:An Economic Appraisal

API PUBL 4491 VOL I 1989-00-00 Effect of Homogeneous andHeterogeneous Surface Roughness on Heavier-Than-Air Gas Dispersion Volume I

API PUBL 4492 VOL II 1989-00-00 Effect of Homogeneous andHeterogeneous Surface Roughness on Heavier-Than-Air Gas Dispersion Volume II SupplementalAppendices

API PUBL 4494 VOL II 1989-00-00 Monitoring near Refineries forAirborne Chemicals on the SARA Title III Section313 List Volume II A Generic Study DesignProtocol

API PUBL 4495 VOL III 1988-00-00 Monitoring near Refineries forAirborne Chemicals on the SARA Title III Section313 List Volume III Literature Survey MonitoringData for Selected Chemicals in AirborneEmissions

API PUBL 4496 VOL IV 1988-00-00 Monitoring Near Refineries forAirborne Chemicals on the SARA Title III Section313 List Volume IV A Sampling and AnalyticalProtocol for Selected Chemicals in AirborneEmissions

API PUBL 4497 1991-00-00 Cost-Effective, Alternative TreatmentTechnologies for Reducing the Concentrations ofMethyl Tertiary Butyl Ether and Methanol inGroundwater

API PUBL 4498 1989-00-00 Survey and Analysis of LiquidGasoline Released to the Environment DuringVehicle Refueling at Service Stations

API PUBL 4499 1989-00-00 Evaluation of Analytical Methods for

Página 34


Measuring Appendix IX Constituents inGroundwater

API PUBL 4500 1989-03-00 Landfarm Air EmissionsAPI PUBL 4501 1990-00-00 Sediment Toxicity EvaluationAPI PUBL 4502 VOL I 1989-00-00 Detailed Analysis of Ozone State

Implementation Plans in Seven Areas Selected forRetrospective Evaluation of Reasons for StateImplementation Plan Failure Volume I: ExecutiveSummary

API PUBL 4503 VOL II 1991-00-00 Detailed Analysis of Ozone StateImplementation Plans in Seven Areas forRetrospective Evaluation of Reasons for StateImplementation Plan Failure Volume II: TechnicalReport

API PUBL 4504 1990-00-00 Case-Control Study of Kidney CancerAmong Petroleum Refinery Workers

API PUBL 4506 1990-00-00 Dioxin and Furans - A Primer WhatThey Are and How to Measure Them

API PUBL 4507 1990-00-00 Abandoned Oil and Gas IndustryWells; A Quantitative Assessment of TheirEnvironmental Implications

API PUBL 4508 1992-00-00 Petroleum in the FreshwaterEnvironment; An Annotated Bibliography 1946- 1983

API PUBL 4509 1991-00-00 Evaluation of Soil Gas andGeophysical Techniques for Detection ofHydrocarbons

API PUBL 4510 1991-00-00 Technological Limits of GroundwaterRemediation: A Statistical Evaluation Method

API PUBL 4511 1991-00-00 (Withdrawn)Vehicle EmissionsInspection and Maintenance (I/M) ProgramImprovement Strategies

API PUBL 4513 1992-00-00 Review of Natural Resource DamageAssessments in Freshwater Environments Task 1- Review of Case Histories

API PUBL 4514 1992-00-00 Review of Natural Resource DamageAssessments in Freshwater Environments Task 2- Effects of Oil Releases into FreshwaterHabitats

API PUBL 4515 1990-00-00 Use of Reactivity Factors to PredictOzone Impacts of Methanol Fuel

API PUBL 4516 1991-00-00 Sampling and Analysis of GasolineRange Organics in Soil

API PUBL 4517 1991-02-00 Produced Water Impacts on LouisianaWetlands Errata - 1991

API PUBL 4518 1990-12-00 Measurement of BTEX Emission Fluxesfrom Refinery Wastewater Impoundments UsingAtmospheric Tracer Techniques

API PUBL 4519 1990-00-00 API Exposure Classification Schemefor Collection of Industrial Hygiene MonitoringData

API PUBL 4520 1991-00-00 Evaluation of a Draft Method forIgnitability of Solid Wastes

API PUBL 4521 1991-00-00 Evaluation of the AET as a Basis forSetting Sediment Quality Criteria

API PUBL 4522 1990-00-00 Results of Hazard Response ModelEvaluation Using Desert Tortoise (NH3) andGoldfish (HF) Data Bases Volume 1: SummaryReport

API PUBL 4523 1990-00-00 Results of Hazard Response ModelEvaluation Using Desert Tortoise (NH3) andGoldfish (HF) Data Bases Volume 2: Appendices

API PUBL 4524 1991-00-00 Clinical Toxicology of the AcuteIngestion of Methanol/Hydrocarbon Blends; A-

Página 35


State-of-the Art ReviewAPI PUBL 4525 1990-00-00 Compilation of Field- Collected Cost

and Treatment Effectiveness Data for the Removalof Dissolved Gasoline Components fromGroundwater

API PUBL 4526 1991-00-00 (Withdrawn)Atmospheric Chemistry ofSulfate Esters

API PUBL 4527 1993-00-00 Evaluation of Limiting ConstituentsSuggested for Land Disposal of Exploration andProduction Wastes

API PUBL 4528 1990-00-00 Petroleum Release Decision Framework(PRDF) User's Manual Version 1.0

API PUBL 4529 1991-00-00 Oil Spill Conference Prevention,Behavior, Control, Cleanup

API PUBL 4531 1991-00-00 Chemical Fate and Impact ofOxygenates in Groundwater: Solubility of BTEXfrom Gasoline-Oxygenate Mixtures

API PUBL 4532 1991-06-00 Produced Water Radionuclide Hazard/Risk Assessment Phase I

API PUBL 4533 VOLUME I 1994-00-00 Effects of Fuel RVP and Fuel Blendson Emissions at Non-FTP Temperatures Volume I:Summary Report

API PUBL 4534 VOLUME II 1991-00-00 Effects of Fuel RVP and Fuel Blendson Emissions at Non-FTP Temperatures Volume II:Compilation of Test Data and LaboratoryProcedures

API PUBL 4536 1991-00-00 Methanol Health Effects EpidemiologyLiterature Review and Search for StudyPopulation: Part 1 - Critical Review of theLiterature Part 2 - Search for Study Population

API PUBL 4538 1991-00-00 (Withdrawn)Remote Sensing ofAutomobile Exhaust

API PUBL 4539 1992-00-00 Evaluation of Area and Volume SourceDispersion Models for Petroleum and ChemicalIndustry Facilities Phase I Final Report

API PUBL 4540 1992-00-00 Area and Volume Source Air QualityModel Performance Evaluation Phase II FinalReport

API PUBL 4541 1994-00-00 Area/Volume Source Dispersion ModelPerformance Evaluation, Phase III

API PUBL 4542 1992-00-00 Temperature, Reid Vapor Pressure andGasohol Effects on Running Losses

API PUBL 4543 1992-00-00 User's Manual for REGRESS:Statistical Evaluation of Asymptotic Limits ofGroundwater Remediation

API PUBL 4545 1992-00-00 Hazard Response Modeling Uncertainty(A Quantitative Method) Volume I User's Guidefor Software for Evaluating Hazardous GasDispersion Models

API PUBL 4546 1992-00-00 Hazard Response Modeling Uncertainty(A Quantitative Method) Volume II Evaluation ofCommonly Used Hazardous Gas Dispersion Models

API PUBL 4547 1992-00-00 Hazard Response Modeling Uncertainty(a Quantitative Method) Volume III Components ofUncertainty in Hazardous Gas Dispersion Models

API PUBL 4548 1992-00-00 Screening of Soils for LeachableBenzene Prediction of Toxicity CharacteristicLeaching Procedure (TCLP) Benzene from TotalBenzene Analysis, Mini-TCLP, and HeadspaceAnalysis

API PUBL 4549 1994-00-00 Field Study of Sediment Quality Neara Refinery Outfall

API PUBL 4550 1992-00-00 Uncertainties in Current Models ofGlobal Warming

Página 36


API PUBL 4551 1994-00-00 Treatment of Gasoline-ContaminatedGroundwater Through Surface Application Part I- Laboratory Experiments

API PUBL 4552 1994-00-00 Treatment of Gasoline-ContaminatedGroundwater Through Surface Application Part II- A Prototype Field Investigation

API PUBL 4553 1993-00-00 Gasoline Vapor Exposure Assessment atService Stations

API PUBL 4554 1993-00-00 Study of the Relationship betweenFolate Status and Methanol Toxicity

API PUBL 4555 1992-00-00 Mortality Study of Marketing andMarine Distribution Workers with PotentialExposure to Gasoline in the Petroleum Industry

API PUBL 4556 1993-00-00 Scientific Assessment of the UrbanAirshed Model (UAM-IV)

API PUBL 4557 1994-00-00 (Withdrawn)Effects of Specific FuelAromatic Compounds on Motor Vehicle ExhaustEmissions Volume I Statistical Analysis andInterpretation Volume II Procedures and DataReport

API PUBL 4558 1995-00-00 Options for Minimizing EnvironmentalImpacts of Freshwater Spill Response

API PUBL 4560 1992-00-00 A 90-Day Feeding Study in the Ratwith Six Different White Mineral Oils (N15 (H),N70 (H), N70 (A), P15 (H), N10 (A), and P100(H), Three Different Mineral Waxes (a LowMelting Point Wax, a High Melting Point Wax anda High Sulphur Wax) and Coconut Oil

API PUBL 4561 1992-00-00 Pump and Treat: The PetroleumIndustry Perspective

API PUBL 4563 1993-00-00 Assessment of Planned Northeast OzoneTransport Region Modeling Activities

API PUBL 4566 1992-10-00 (Withdrawn)Evaluation of theTechnology Alternatives for Controlling FugitiveEmissions from Sludge Dewatering Operations

API PUBL 4567 1993-00-00 Oil Spill Response in FreshwaterEnvironments

API PUBL 4568 1993-00-00 Preliminary Scope for a Gulf CoastOzone Study

API PUBL 4569 1994-00-00 Subsurface Fate and Transport of aMethanol/Gasoline Blend (M85) a LaboratoryInvestigation

API PUBL 4571 1993-00-00 Fundamental Evaluation of theChemdat7 Air Emissions Model

API PUBL 4572 1994-00-00 In-Use Vehicle Exhaust EmissionsStudy: Controlled Testing

API PUBL 4573 1994-00-00 Comparison of HC and CO EmissionEstimates Using FTP, IM240 and Remote Sensing:Statistical Analysis

API PUBL 4574 1994-00-00 On-Road Carbon Monoxide andHydrocarbon Remote Sensing in the Chicago Areain 1992

API PUBL 4580 1993-00-00 1993 Oil Spill ConferenceAPI PUBL 4581 1993-06-00 Evaluation of Technologies for the

Treatment of Petroleum Product MarketingTerminal Wastewater

API PUBL 4582 1993-06-00 Comparative Evaluation of BiologicalTreatment of Petroleum Product TerminalWastewater by the Sequencing Batch ReactorProcess and the Rotating Biological ContactorProcess

API PUBL 4587 1994-04-00 Remote Sensing Feasibility Study ofRefinery Fenceline Emissions

API PUBL 4588 1993-05-00 Development of Fugitive Emission

Página 37


Factors and Emission Profiles for PetroleumMarketing Terminals Volume I: Text

API PUBL 4589 1993-12-00 Fugitive Hydrocarbon Emissions fromOil and Gas Production Operations

API PUBL 4591 1993-00-00 Odor and Taste Threshold StudiesPerformed with Tertiary Amyl Methyl Ether (TAME)

API PUBL 4592 1994-00-00 Odor Threshold Studies Performed withGasoline and Gasoline Combined with MTBE, ETBEand TAME

API PUBL 4593 1994-00-00 Transport and Fate of Non-BTEXPetroleum Chemicals in Soils and Groundwater

API PUBL 4594 1995-00-00 Critical Review of Toxicity Valuesand an Evaluation of the Persistence ofPetroleum Products for Use in Natural ResourceDamage Assessments

API PUBL 4595 1995-00-00 Criteria for pH in Onshore SolidWaste Management in Exploration and ProductionOperations

API PUBL 4596 1994-00-00 (Withdrawn)Studies to Determine theEcological Effects of Cleanup Methods for OiledShorelines Phase 1: Study Design for a LouisianaMarsh Experiment

API PUBL 4597 1995-00-00 Analytical Method Performance forRCRA Programs Refinery and Other RCRA Analytes

API PUBL 4598 1994-00-00 Gasoline: Insights into the Etiologyof the Development of Hepatocellular Carcinomain the Mouse

API PUBL 4599 1994-00-00 Interlaboratory Study of ThreeMethods for Analyzing Petroleum Hydrocarbons inSoils

API PUBL 4600 1995-00-00 Metals Criteria for Land Managementof Exploration and Production Wastes: TechnicalSupport Document for API Recommended GuidanceValues

API PUBL 4601 1994-00-00 Transport and Fate of DissolvedMethanol, Methyl-Tertiary-Butyl- Ether, andMonoaromatic Hydrocarbons in a Shallow SandAquifer Appendix H: Laboratory BiotransformationStudies

API PUBL 4602 1994-00-00 Minimization, Handling, Treatment,and Disposal of Petroleum Products TerminalWastewaters; Errata - 1994

API PUBL 4603 1994-00-00 Investigation of MOBILE5a EmissionFactors: Assessment of Exhaust and NonexhaustEmission Factor Methodologies and OxygenateEffects

API PUBL 4604 1994-00-00 Investigation of MOBILE5a EmissionFactors: Evaluation of I/M and LEV ProgramBenefits

API PUBL 4605 1994-00-00 Investigation of MOBILE5a EmissionFactors: Evaluation of IM240-to-FTP Correlationand Base Emission Rate Equations

API PUBL 4606 1994-00-00 Source Control and Treatment ofContaminants Found in Petroleum Product TerminalTank Bottoms

API PUBL 4607 1994-00-00 User's Guide and Technical ResourceDocument: Evaluation of Sediment Toxicity Testsfor Biomonitoring Programs

API PUBL 4608 1994-00-00 Evaluation of Sediment Toxicity Testsfor Biomonitoring Programs

API PUBL 4609 1995-00-00 In Situ Air Sparging: Evaluation ofPetroleum Industry Sites and Considerations forApplicability, Design and Operation

API PUBL 4610 1995-00-00 Critical Review of Draft EPA Guidance

Página 38


on Assessment and Control of BioconcentratableContaminants in Surface Waters

API PUBL 4611 1995-04-00 Interlaboratory Study of EPA Methods1662, 1654A, and 1663 for the Determination ofDiesel, Mineral and Crude Oils in Drilling Mudsfrom Offshore Oil and Gas Industry Discharges

API PUBL 4612 1994-04-00 Study of Refinery Fugitive Emissionsfrom Equipment Leaks

API PUBL 4613 1994-04-00 Study of Refinery Fugitive Emissionsfrom Equipment Leaks Appendices

API PUBL 4615 1995-01-00 Emission Factors for Oil and GasProduction Operations

API PUBL 4616 1994-00-00 Importance of Using Alternative BaseCases in Photochemical Modeling

API PUBL 4617 1995-00-00 Monte Carlo Approach to GeneratingEquivalent Ventilation Rates in PopulationExposure Assessments

API PUBL 4618 1995-00-00 Characteristics and Performance ofSupercritical Fluid Extraction (SFE) in theAnalysis of Petroleum Hydrocarbons in Soils andSludges

API PUBL 4619 1995-00-00 Study to Characterize AirConcentrations of Methyl Tertiary Butyl Ether(MTBE) at Service Stations in the Northeast

API PUBL 4620 1995-00-00 International Oil Spill ConferenceProceedings Achieving and MaintainingPreparedness

API PUBL 4621A 1994-00-00 1995 International Oil SpillConference Implementing an Effective ResponseManagement System

API PUBL 4621B 1994-00-00 1995 International Oil SpillConference Use and Misuse of Science in NaturalResource Damage Assessment

API PUBL 4621C 1994-00-00 1995 International Oil SpillConference Perspectives on Establishing andMaintaining Oil Pollution Response Capabilities

API PUBL 4622 1995-00-00 Petroleum Industry DataCharacterizing Occupational Exposures to MethylTertiary Butyl Ether (MTBE) 1983-1993

API PUBL 4623 1995-00-00 Anecdotal Health-Related ComplaintData Pertaining to Possible Exposures to MethylTertiary Butyl Ether (MTBE): 1993 and 1994Follow-Up Surveys (1984-1994)

API PUBL 4625 1995-00-00 Service Station Personnel Exposuresto Oxygenated Fuel Components - 1994

API PUBL 4627 1995-00-00 In Situ and On-Site Biodegradation ofRefined and Fuel Oils: A Review of TechnicalLiterature 1988 - 1991

API PUBL 4628 1996-00-00 Guidance Manual for ModelingHypothetical Accidental Releases to theAtmosphere

API PUBL 4630 1995-00-00 (Withdrawn)Electronic Exchange ofEnvironmental Compliance Information: A ProposedApproach

API PUBL 4631 1995-00-00 Petroleum Contaminated LowPermeability Soil: Hydrocarbon DistributionProcesses, Exposure Pathways and In SituRemediation Technologies

API PUBL 4632 1995-00-00 Reducing Uncertainty in LaboratorySediment Toxicity Tests

API PUBL 4633 1995-09-00 Barium in Produced Water: Fate andEffects in the Marine Environment

API PUBL 4634 1995-00-00 Index and Abstracts of API Health-Related Research 13th Edition 1959-1994

Página 39


API PUBL 4635 1996-12-00 Compilation of Field AnalyticalMethods for Assessing Petroleum Product Releases

API PUBL 4637 1996-00-00 Analysis of Causes of Failure in HighEmitting Cars

API PUBL 4638 1996-07-00 Calculation Workbook for Oil and GasProduction Equipment Fugitive Emissions

API PUBL 4639 1996-04-00 Estimation of Fugitive Emissions fromPetroleum Refinery Process Drains Phase I Report

API PUBL 4640 1997-00-00 Petroleum in the FreshwaterEnvironment an Annotated Bibliography 1946- 1993

API PUBL 4641 1996-06-00 Summary of Produced Water ToxicityIdentification Evaluation Research

API PUBL 4642 1996-12-00 A Study to Quantify On-Road Emissionsof Dioxins and Furans from Mobile Sources: Phase2

API PUBL 4643 1996-00-00 Estimation of Infiltration andRecharge for Environmental Site Assessment

API PUBL 4644 1997-02-00 Methodology for EstimatingIncremental Benzene Exposures and RisksAssociated with Glycol Dehydrators

API PUBL 4645 1997-01-00 Methane and Carbon Dioxide EmissionEstimates from U.S. Petroleum Sources

API PUBL 4646 1996-12-00 Evaluation of Fuel Tank Flammabilityof Low RVP Gasolines

API PUBL 4647 1997-06-00 Brain Glial Fibrillary AcidicProtein (GFAP) as a Marker of NeurotoxicityDuring Inhalation Exposure to Toluene

API PUBL 4648 1996-12-00 Human Neurobehavioral Study Methods:Effects of Subject Variables on Research Results

API PUBL 4650 1997-02-00 Analysis of High-Mileage-VehicleEmissions Data from Late-Model, Fuel-InjectedVehicles

API PUBL 4651 1997-00-00 International Oil Spill ConferenceImproving Environmental Protection - Progress,Challenges, Responsibilities Proceedings

API PUBL 4652A 1997-00-00 1997 International Oil SpillConference Putting Dispersants to Work:Overcoming Obstacles

API PUBL 4652B 1997-00-00 1997 International Oil SpillConference International Responsibilities: AreWe Our Brothers' Keeper?

API PUBL 4652C 1997-00-00 1997 International Oil SpillConference - Differences in Risk Perception: HowClean is Clean?

API PUBL 4653 1997-06-00 Fugitive Emission Factors for CrudeOil and Product Pipeline Facilities

API PUBL 4654 1997-10-00 Field Studies of BTEX and MTBEIntrinsic Bioremediation

API PUBL 4655 1997-08-00 Field Evaluation of Biological andNon-Biological Treatment Technologies to RemoveMTBE/Oxygenates from Petroleum Product TerminalWastewaters

API PUBL 4656 1997-05-00 Bioaccumulation: How Chemicals Movefrom the Water into Fish and Other AquaticOrganisms

API PUBL 4657 1997-11-00 Effects of Sampling and AnalyticalProcedures on the Measurement of GeochemicalIndicators of Intrinsic Bioremediation:Laboratory and Field Studies

API PUBL 4658 1997-11-00 Methods for Measuring Indicators ofIntrinsic Bioremediation: Guidance Manual

API PUBL 4659 1998-02-00 Graphical Approach for Determining

Página 40


Site-Specific Dilution-Attenuation Factors(DAFs) Technical Background Document and User'sGuide; Cover Page and A-20 -1998

API PUBL 4662 1997-10-00 Evaluation of a Petroleum ProductionTank Emissions Model Appendices A, B, C, & D-October 1997

API PUBL 4663 1997-10-00 Remediation of Salt-Affected Soils atOil and Gas Production Facilities Errata10/15/98

API PUBL 4664 1998-04-00 Mixing Zone Modeling and DilutionAnalysis for Water-Quality-Based NPDES PermitLimits

API PUBL 4665 1998-04-00 Analysis and Reduction of Toxicity inBiologically Treated Petroleum Product TerminalTank Bottoms Water

API PUBL 4666 1999-04-00 Toxicity of Common Ions to Freshwaterand Marine Organisms

API PUBL 4667 1997-11-00 Vehicle Emissions Testing of RapidlyAged Catalysts

API PUBL 4668 1998-06-00 Delineation and Characterization ofthe Borden MTBE Plume: An Evaluation of EightYears of Natural Attenuation Processes

API PUBL 4670 1998-08-00 Selecting Field Analytical Methods aDecision-Tree Approach

API PUBL 4671 1998-07-00 Technical Bulletin on OxygenReleasing Materials for In Situ GroundwaterRemediation

API PUBL 4672 1998-10-00 The Use of Treatment Wetlands forPetroleum Industry Effluents

API PUBL 4673 1999-04-00 Impacts of Petroleum ProductMarketing Terminals on the Aquatic Environment

API PUBL 4674 1998-12-00 Assessing the Significance ofSubsurface Contaminant Vapor Migration toEnclosed Spaces Site-Specific Alternatives toGeneric Estimates

API PUBL 4676 1998-10-00 Arsenic: Chemistry, Fate, Toxicity,and Wastewater Treatment Options

API PUBL 4677 1999-04-00 Fugitive Emissions from RefineryProcess Drains Volume I; Fugitive EmissionFactors for Refinery Process Drains

API PUBL 4678 1999-04-00 Fugitive Emissions from RefineryProcess Drains Volume II; Fundamentals ofFugitive Emissions from Refinery Process Drains

API PUBL 4680 1998-12-00 Amine Unit Air Emissions ModelEvaluation

API PUBL 4682 1999-06-00 Free-Product Recovery of PetrolemHydrocarbon Liquids

API PUBL 4683 1998-11-00 Correlation Equations to Predict ReidVapor Pressure and Properties of GaseousEmissions for Exploration and ProductionFacilities

API PUBL 4684 1999-03-00 Compilation and Review of Data on theEnvironmental Effects of In Situ Burning ofInland and Upland Oil Spills

API PUBL 7100 1996-11-00 A Naturally Occurring RadioactiveMaterial (NORM) Disposal Cost Study FirstEdition

API PUBL 7101 1997-11-00 National Survey on NaturallyOccurring Radioactive Material (NORM) inPetroleum Production and Gas ProcessingFacilities

API PUBL 7102 1997-11-00 Methods for Measuring NaturallyOccurring Radioactive Materials (NORM) inPetroleum Production Equipment

Página 41


API PUBL 7103 1997-11-00 Management and Disposal Alternativesfor Naturally Occurring Radioactive Material(NORM) Wastes in Oil Production and Gas PlantEquipment

API PUBL 7104 1997-11-00 Proceedings of the 1995 API and GRINaturally Occurring Radioactive Material (NORM)Conference

API PUBL 7105 1997-11-00 Probabilistic Estimates of Dose andIndoor Radon Concentrations Attributable toRemediated Oilfield Naturally OccuringRadioactive Material (NORM)

API RP 9000 1998-10-00 Management Practices, Self-AssessmentProcess, and Resource Materials Second Edition

API PUBL 9100A 1998-10-00 Model Environment, Health & Saftey(EHS) Management System A Voluntary Tool forCompanies Interested in Developing an EHSManagement System or Enhancing an ExistingSystem

API PUBL 9100B 1998-10-00 Guidance Document for Model EHSManagement System A Manual to Assist CompaniesInterested in Developing an EHS ManagementSystem or Enhancing an Existing System

API PUBL 31101 1993-00-00 Environmental Design Considerationsfor Petroleum Refining Crude Processing Units

API PUBL 45551 1994-00-00 Nested Case-Control Study of KidneyCancer, Leukemia and Multiple Myeloma in aCohort of Land-Based Terminal Workers Exposed toGasoline in the Petroleum Industry

API PUBL 45552 1994-00-00 Exposure Assessment for Marketing andMarine Distribution Workers in the PetroleumIndustry with Potential Exposure to Gasoline

API PUBL 45561 1993-00-00 Scientific Assessment of the UrbanAirshed Model (UAM-IV): an Overview

API PUBL 45592 1995-00-00 Results of Toxicological StudiesAPI PUBL 45752 1993-00-00 Proceedings of the 1991 Oil Spill

Conference Infobase Tutorial and Reference GuideAPI PUBL 45811 1993-04-00 Evaluation Technologies for the

Treatment of Petroleum Project MarketingTerminal Wastewater (Publication 4581)Appendices: Analytical Results and BioassayResults

API PUBL 45821 1993-06-00 Comparative Evaluation of BiologicalTreatment of Petroleum Product TerminalWastewater by the Sequencing Batch ReactorProcess and the Rotating Biological ContractorProcess Appendices: Analytical LaboratoryResults

API PUBL 45881 1993-05-00 Development of Fugitive EmissionFactors and Emission Profiles for PetroleumMarketing Terminals Volume II: Appendices

API PUBL 46201 1995-00-00 1995 Oil Spill Conference Achievingand Maintaining Preparedness Abstracts

API 1997-04-00 Technical Data Book - PetroleumRefining Sixth Edition

API TDB CHAPTER 1 1992-00-00 Technical Data Book Chapter 1- General Data Fifth Edition

API TDB CHAPTER 2 1982-00-00 Technical Data Book Chapter 2- Characterization of Hydrocarbons

API TDB CHAPTER 3 1992-00-00 Technical Data Book Chapter 3- Petroleum Fraction DistillationInterconversions

API TDB CHAPTER 4 1982-00-00 Technical Data Book Chapter 4- Critical Properties

API TDB CHAPTER 5 1992-00-00 Technical Data Book Chapter 5 - Vapor

Página 42


PressureAPI TDB CHAPTER 6 1983-00-00 Technical Data Book Chapter 6

- DensityAPI TDB CHAPTER 7 1976-00-00 Technical Data Book Chapter 7

- Thermal PropertiesAPI TDB CHAPTER 8 1992-00-00 Technical Data Book Chapter 8

- Vapor-Liquid Equilibrium K-ValuesAPI TDB CHAPTER 9 1992-00-00 Technical Data Book Chapter 9 - Phase

Equilibria in Systems Containing Water FifthEdition

API TDB CHAPTER 10 1976-00-00 Technical Data Book Chapter 10- Surface and Interfacial Tension

API TDB CHAPTER 11 1992-00-00 Technical Data Book Chapter 11- Viscosity Fifth Edition

API TDB CHAPTER 12 1992-00-00 Technical Data Book Chapter 12- Thermal Conductivity Fifth Edition

API TDB CHAPTER 13 1976-00-00 Technical Data Book Chapter 13- Diffusivity

API TDB CHAPTER 14 1983-00-00 Technical Data Book Chapter 14- Combustion

API TDB CHAPTER 15 1983-00-00 Technical Data Book Chapter 15- Adsorption Equilibria

API 1 1976-09-00 Orifice Coefficients for Two-PhaseFlow Through Velocity Controlled SubsurfaceSafety Valves

API 2 1976-03-00 Detection and Prevention of SandErosion of Production Equipment

API 2 1976-05-00 Condensed Version of Detection andPrevention of Sand Erosion of ProductionEquipment

API 3 1976-11-00 Oil Analysis in Production DischargesAPI 4 1977-02-11 Corrosion Fatigue of Cathodically

Protected, Welded Carbon Steel in Cold SeawaterAPI 5 1977-07-00 Study of Pressure Drop and Closure

Forces in Velocity-Type Subsurface Safety ValvesAPI 6 1977-05-00 Design of Fittings to Reduce Wear

Caused by Sand ErosionAPI 7 1978-03-00 Cyclic Deformations of Offshore

Structures on ClayAPI 7 1978-00-00 Horizontal Cyclic load Behavior of

Small Scale Piles and Footings on ClayFoundations

API 7 1977-03-00 Characterization of Soil BehaviorUnder Cyclic Loading as Applied to theFoundation Design of Offshore Structures

API 8 1978-06-15 Centrifuge Studies of Cyclic LateralLoad-Displacement Behavior of Single Piles

API 9 1979-05-01 A Model Study of Axially Loaded PileSegments Including Pore Pressure Measurements

API 9-A 1976-03-05 AXCOL 3: A Program for Discrete-Element Solution of Axially Loaded Members withLinear or Nonlinear Supports

API 9C 1976-03-05 Axcol 3: a Program for Discrete-Element Solution of Axially Loaded Members withLinear or Nonlinear Supports

API 10 1980-02-00 Development of Methods to PredictPressure Drop and Closure Conditions forVelocity-Type Subsurface Safety Valves

API 11 1980-01-15 Field Tests of Small-Scale PileSegments in a Soft Clay Deposit under RepeatedAxial Loading

API 12 1980-03-20 Influence of Sea Water and CathodicProtection upon Fatigue of Welded Steel Plates,

Página 43


as Applicable to Offshore StructuresAPI 13 1981-08-10 Axially-Loaded Centrifuge Pile TestsAPI 13 1979-06-04 Cyclic Lateral Loading of Piles;

Analysis of Centrifuge Tests ErrataAPI 13-A 1980-06-20 Analysis of Centrifuge Pile Tests;

Simulation of Pile-DrivingAPI 14 1980-04-18 Inelastic Cyclic Behavior of Tubular

Braced FramesAPI 15 1979-11-00 Probability-Based Fatigue Design

Criteria for Offshore StructuresAPI 16 1980-02-00 Local Buckling of Cylindrical Tubular

Columns Made of A-36 SteelAPI 17 1980-03-31 Review of Gas Analysis Techniques for

Application to Combustible Gas DetectorsAPI 19 1981-03-00 Strain Gage Test Results for Proposed

1-13/16 and 7-1/16 30,000 psi Rated API FlangesAPI 26 1980-11-00 Stage 1 - Baseline Analysis

Earthquake Analysis Studies for OffshoreStuctures

API 26 1981-10-00 Stage II - Time History AnalysesEarthquake Analytical Studies for OffshoreStructures

API 78-18 1981-03-00 Strain Gage Test Results for Proposed1-13/16 and 7-1/16 30,000 psi Rated API Flanges

API 78-28 1982-06-00 Review of the State-of-the-Art of OilSpill Simulation Models

API 79-12 1981-04-30 Influence of Sea Water and CathodicProtection upon Fatigue of Welded Steel Platesas Applicable to Offshore Structures

API 79-20 1980-01-00 The Propagating Buckle in MarinePipelines

API 79-21 1980-11-00 Analysis of Flange and Clamp JointsExposed to a Fire Environment

API 79-22 1980-06-00 Applicability of Reliability Analysisin Offshore Design Practice

API 79-23 1980-05-15 Development of an Analytical Modelfor the Ultimate Capacity of Axially LoadedGrouted Pile to Jacket Connections

API 79-24 1980-12-31 Plant Uptake and Accumulation ofMetals Derived from Drilling Fluids

API 79-25 1981-01-00 Inelastic Structural Modeling ofBraced Offshore Platforms for Seismic Loading

API 79-27 1981-09-30 Establishment Parameters to Which GasDetector Equipment is Exposed in Offshore Oiland Gas Production Operations

API 79-28 1981-02-00 Review of the State-of-the-Art of OilSpill Simulation Models Phase I

API 79-28 1981-08-00 Review of the State-of-the-Art of OilSpill Simulation Models Phase II

API 79-28 1980-06-10 Review of the State-of-the-Art ofProbabilistic Oil Spill Simulation

API 79-28 1982-06-00 Review of the State-of-the-Art of OilSpill Simulation Models

API 80-15 1981-02-00 Probability-Based Fatigue DesignCriteria for Offshore Structures

API 80-22 1981-10-00 Guidelines for Calibrating API RP2Afor Reliability-Based Design

API 80-24 1982-12-31 Agronomic Impacts Resulting from LandDisposal of Used Drilling Fluids and Cuttings

API 80-26A 1980-10-00 Acceleration Time Histories forEarthquake Analysis Studies of OffshoreStructures

API 80-26B 1981-10-00 Earthquake Analysis Studies for

Página 44


Offshore Structures Stage II - Time HistoryAnalysis

API 80/27 1980-08-00 Cyclic Inelastic Bahavior of SteelOffshore Structures

API 80-29 1981-03-00 Review and Compilation of File TestResults Axial File Capacity

API 80-30A 1982-11-00 Collapse Performance of HC-95 CasingAPI 80-30B 1987-08-00 Collapse Resistance of Mill Selected

High Collapse Grade 95 CasingAPI 80-31 1981-10-00 Hydrodynamic Coefficients for

Cylinders with Pronounced Marine GrowthsAPI 80-31B 1983-01-00 Hydrodynamic Coefficients for

Cylinders with Pronounced Marine GrowthsAPI 80-32 1982-01-00 Shaking Table Tests of a Tubular

Steel Frame ModelAPI 80-33 1981-03-00 Effects of Fire Environment on

Pressure Capability of Standard API and ANSIConnections

API 80-34 1982-06-25 Spectrum Fatique Properties of WeldedSteel as Applicable to Offshore StructuresErrata

API 80-35 1981-12-10 Drill Pipe/Casing ProtectorPerformance Testing

API 81-15 1983-01-00 Probability-Based Fatigue DesignCriteria for Offshore Structures

API 81-22 1982-11-00 Utilization of a Reliability-BasedAPI RP2A Format on a Platform Design

API 81-29 1982-12-00 Review and Compilation of Pile TestResults Axial Pile Capacity

API 81-33 1982-07-00 Effects of Fire Environment onPressure Capability of Standard API and ANSIConnections Testing and Revised AnalyticalProcedure

API 81-34 1983-04-20 Spectrum Fatigue Properties of WeldedSteel as Applicable to Offshore Structures

API 81-37 1982-01-00 Collapse Performance of FabricatedCylinders Under Combined Axial Tension andExternal Pressure

API 81-38 1982-01-00 Experimental Study on the Effect ofAxial Loading on Collapse Resistance of Casing

API 81-39 1982-05-00 Rheological Evaluation of CementSlurries

API 81-40 1982-12-00 Chord Stress Effects on the UltimateStrength of Tubular Joints

API 81-43 1982-06-00 Analysis of Trace Metals in DrillingFluid Barite

API 82-22 1983-11-00 Utilizing a Reliability-Based APIRP2A Format

API 82-31 1983-01-00 Hydrodynamic Coefficients forCylinders Roughened by Marine Growths from theGulf of Mexico

API 82-34 1985-03-08 Variable Deflection FatigueProperties of Welded Steel as Applicable toOffshore Structures

API 82-36 1984-12-00 Development of Methods for theEvaluation of Perforators

API 82-39 1982-05-00 Rheological Evaluation of CementSlurries

API 82-41-1 1983-05-00 Evaluation of P-Y Relationships inSands

API 82-41-2 1984-04-00 Evaluation of P-Y Relationships inClays

API 82-45 Rheological Characterization of Fracturing

Página 45


FluidsAPI 82/83-46 1984-02-00 Collapse Tests of Fabricated

Cylinders Under Combined Axial Compression andExternal Pressure

API 83-22 1985-01-00 Implementation of a Reliability-BasedAPI RP2A Format

API 83-31 1984-06-00 Hydrodynamic Coefficients forCylinders Covered with Soft Organisms,Particularly Sea Anemones

API 83-33 1984-12-00 Prediction of Performance of 2"-6"ANSI Flanges and 2 1/16"-7 1/16" API Clamps andFlanges in Standard Fire Environment

API 83-34 1985-03-08 Variable Deflection FatigueProperties of Welded Steel as Applicable toOffshore Structures

API 83-42 1985-08-29 Influence of Cyclic Loading onAxially Loaded Piles in Clay

API 83-42B 1984-09-00 Analysis of Pile Response under AxialLoads

API 83-45 1984-12-00 Rheological Characterization ofFracturing Fluids

API 83-47 1984-02-21 Technical Summary Shake TableCorrelation Project

API 83-48 1985-01-25 Fatigue of Selected High StrengthSteels in Sea Water

API 83-49A 1983-10-00 Planning and Final Engineering forDrilling and Completion of Two CBLStandardization Wells

API 83-50 1985-06-00 Interlaboratory and IntralaboratoryComparision of the API Drilling Fluids BioassayProtocol

API 84-31 1985-06-00 Hydrodynamic Coefficients for MarineRoughened Cylinders Addendum October 1986

API 84-33 1985-06-00 Fire Testing of API Connections withConditions of Offshore Platform Well Bay Fire

API 84-39 1986-11-00 Rheological Evaluation of CementSlurries - Correlation of Concentric Cylinderand Tube Viscometers


API 84-51 1985-12-00 Investigation of Pipe ThreadCompounds

API 84-52 1985-12-00 An Evaluation of the Behavior andAnalysis of Laterally Loaded Pile Groups

API 84-53 1985-05-24 Investigation of Leak Resistance ofAPI 8-Round Connector

API 84-54 1985-12-00 Bending Capacity of Fabricated Pipeat Fixed Ends

API 85-16 1986-11-25 Stress Analysis of API Type 16B and16BX Hubs

API 85-22 1986-01-00 Development of Preliminary Load andResistance Design Document for Fixed OffshorePlatforms

API 85-22 1985-11-14 Seismic Load Effects Study AddendumAPI 85-24 1987-09-15 Weld Profile and Plate Thickness

Effects in Fatigue as Applicable to OffshoreStructures

API 85-31 1987-03-00 Hydrodynamic Coefficients for Marine-Roughened Cylinders

API 85-39 1988-09-00 Laminar and Turbulent Flow of CementSlurries in Large Diameter Pipe


Página 46


API 85-48 1987-06-30 Fatigue of Selected High StrengthSteels in Sea Water

API 85-53 1985-12-20 Investigation of Leak Resistance ofAPI 8-Round Connector

API 85-54 1987-04-00 Bending Capacity of Fabricated Pipeat End Connections

API 85-55 1986-02-00 Earthquake Analysis for LRFDCalibration

API 85-56 1985-12-00 Collapse Tests of Short TubularColumns Subjected to Combined Loads

API 86-17 1987-05-00 Subsurface Safety Valve ResearchStudy - Year 1

API 86-18 1989-04-00 Weld Profile and Thickness Effects onFatigue of Tubular Welded Joints

API 86-18 1989-01-00 Weld Profile and Thickness Effects onFatigue of Tubular Welded Joints

API 86-21 1987-10-00 Capabilities of API Flanges underCombination of Loading

API 86-22 1986-12-00 Load and Resistance Factor Design- Recommended Practice for Approval

API 86-29A 1988-03-00 Comparison of Measured Axial LoadCapacities of Steel Pipe Piles in Sand withCapacities Calculated Using the API RecommendedPractice (RP2A)

API 86-29B 1988-03-00 Offshore Axial Pile DesignReliability

API 86-36 1987-04-10 Effects of Stress and Pore Pressureon Penetration of Jet Perforators in BereaSandstone

API 86-45 Rheological Characterization of FracturingFluids


API 86-53 1987-01-05 Investigation of Leak Resistance ofAPI Buttress Connector

API 86-54 1987-04-00 Bending Capacity of Fabricated Pipeat End Connections

API 86-55 1987-02-00 Tubular Member Strength Equations forLRFD

API 86/87-56 1988-02-00 Effects of External HydrostaticPressure on Tubular Beam-Columns

API 87-17 1988-12-00 API 14A Subsurface Safety ValveResearch Study - Year 2

API 87-20 1988-07-00 Environmental Event CombinationCriteria Phase I, Risk Analysis

API 87-22 1987-12-00 Load and Resistance Factor Design- Recalibration

API 87-24 1993-12-29 Weld Profile and Plate ThicknessEffects in Fatigue as Applicable to OffshoreStructures

API 87-24 1990-02-15 Weld Profile and Plate ThicknessEffects in Fatigue as Applicable to OffshoreStructures Progress Report

API 87-29 1990-08-00 Offshore Lateral Pile DesignReliability

API 87-36 1988-07-07 Further Effects of Stress onPenetration and Flow Performance of JetPerforators

API 87-45 1988-10-00 Rheology of Fracturing Fluid GelsAPI 87-48 1989-03-31 Fatigue of Selected High Strength

Steels in Sea WaterAPI 87-48 1987-09-01 Fatigue of Selected High Strength

Steels in Sea Water - A Compilation of Material

Página 47


PropertiesAPI 87-53 1989-11-15 Investigation of Leak Resistance of

API Casing ConnectionsAPI 87-56 1989-02-00 Hydrostatic Beam Column Test (Phase

II)API 88-17 1989-12-00 API 14A Subsurface Safety Valve

Research Study - Year 3API 88-20 1990-02-00 Environmental Event Combination

Criteria Phase II: Design Calibration andDirectionality Effect

API 88-21 1990-12-00 Capabilities of API Integral Flangesunder Combination of Loading

API 88-22 1989-10-00 Load and Resistance Factor Design forFixed Offshore Platforms

API 88-24 1990-02-15 Weld Profile and Plate ThicknessEffects in Fatigue as Applicable to OffshoreStructures API 87-24

API 88-25 1989-06-16 The Effect of Toughness on TubularGood Service Performance

API 88-30 1989-03-21 Specification ParametersDetermination Drilling Fluids Materials

API 88-36 1989-11-00 Minimum Size and Stress Requirementsfor a Possible API Standard Test Target forPerformance Evaluation of Shaped Charge Oil WellPerforators in Stressed Rock


API 89-17 1991-03-00 API 14A Subsurface Safety ValveResearch Study-Year 4

API 89-21 1990-06-00 Capabilities of Overbored APIThreaded Flanges under Combination of Loading

API 89-21 1989-12-00 Temperature Derating of API Flangesunder Combination of Loading

API 89-22 1991-05-00 Load and Resistance Factor Design- Updating and Expanded Applications

API 89-24 1991-09-15 Weld Profile and Plate ThicknessEffects in Fatigue as Applicable to OffshoreStructures

API 89-25 1990-11-00 Phase II - The Effect of Toughness onTubular Good Service Performances

API 89-29 1992-08-00 Offshore Pile System ReliabilityAPI 89-30 1990-03-14 Specification Parameters

Determination Drilling Fluids MaterialsAPI 89-36 1990-06-00 Application of Prototype Penetration

and Flow Tests in Stressed Targets to SeveralPerforator Charges and Rocks

API 90-21 1994-01-00 Sealability of API R, RX, & BX RingGaskets

API 90-30 1992-02-15 Specification ParametersDetermination Drilling Fluids Materials

API 90-36 1991-12-00 Investigation of Core Orientation andPerforation Debris on Standard Perforation FlowTests

API 90-42 1994-08-25 Axial Capacity of Piles in SandAPI 90-48 1991-02-13 Growth Rate of Small Fatigue Cracks

as Relevant to Higher Strength Steels forOffshore Structures

API 90-48 1991-01-25 Growth Rate of Short Fatigue Cracksas Relevant to Higher Strength Steels forOffshore Structures

API 90-56 1993-10-00 Analysis Cylindrical Shell Databaseand Validation of Design Formulations

API 90-60 1992-11-19 Cyclic Pressure Fatique Evaluation of

Página 48


High Pressure Fiberglass PipeAPI 90-61 1991-02-00 Recommended Practice for Underwater

Magnetic Particle In-Service Weld Inspection ofOffshore Fixed Platforms and Guidelines forQualification of Magnetic Particle InspectorDivers

API 90-62 1991-11-30 Experimental Study of the Erosional/Corrosional Velocity Citerion for SizingMultiphase Flow Lines Phase 1 - ExperimentalFacility Construction Report

API 90-63 1993-06-00 Capabilities of Swivel Flanges underCombinations of Loading

API 90-64 1992-03-20 API Elastomer Test Program - Task BAPI 90-66 1992-01-22 Wind-Induced FatigueAPI 91-20A 1992-08-00 Environmental Event Combination

Criteria for Tension Leg Platforms Phase I: RiskAnalysis


API 91-62 1993-09-00 Experimental Study of the Erosional/Corrosional Velocity Criterion for SizingMultiphase Flow Lines Phase II-ExperimentalResults

API 91-67 1992-05-00 Seismic Safety Requalification ofOffshore Platforms

API 91-70 1992-04-00 Development of Make-up Procedures forFibreglass Tubing

API 91-71 1992-07-01 Proposal for New Nuclear Well LoggingCalibration Facility

API 92-30 1993-02-26 Specification Parameters for DrillingFluid Products

API 92-48 1994-01-01 Growth Rate of Short Fatigue Cracksas Relevant to Higher Strength Steels forOffshore Structures

API 92-56 1995-04-00 Analysis of Cylindrical ShellDatabase and Validation of Design Formulations(Phase 2: for D/t Values > 300)

API 92-66 1994-00-00 Vortex-Induced Vibrations ofStructural Members in Unsteady Winds

API 92-68 1994-12-00 Large Scale Natural Gas/KerosineMixed Fuel Jet Fires

API 92-70 1993-06-00 Development of Procedures to Define aReliability Based Specification for the Make-Upof FRP 8-Round Connections

API 92-72 1992-11-00 API RP 5C5 Class III Test SummaryConnection Evaluation API Proposed TSA Tubing on2-7/8" - 6.5 PPF L80 Pipe

API 92-75 1996-01-17 Weld Profile Effects and Fatigue LifeImprovement to American Petroleum InstituteOffshore Tubular Joint Research Center

API 93-77 Influence of Cathodic Protection on the FatigueLife of Welded Connections in Seawater

API 93-85 1993-01-30 Report for API 11V2 VerificationTests: Part 1 - Review of Gas Lift Valve TestingFacility

API 94-62 1995-07-00 Erosion/Corrosion Testing forMultiphase Flow Lines

API 94-81 1995-05-00 Further Evaluation of OffshoreStructures Performance in Hurricane Andrew- Development of Bias Factors for PileFoundation Capacity

API 117 1973-01-00 Thermal Properties of HydrocarbonBearing Rocks at High Temperatures and Pressures

Página 49


API 118 1978-09-00 Tests of Fabricated Tubular ColumnsAPI 119 1978-11-00 Ground Motion Intensity Factors and

Acceleration Response Spectra Ninth Edition APIRP 2A Earthquake Design Provisions Eastern Gulfof Alaska Region

API 120 1983-09-00 Bending Moment Capacity Calculationsfor Special API Clamp/Hub Combinations

API 1114-5 1996-06-00 Ultrasonic Testing Requirements forSingle-Sided Butt Welds in Offshore Fabrications

Página 50

api

Documents

Transcript of api