![Welcome! [] Webinars/Webinar 6 - Matching ST... · Thermoflow Training ... 2- Scripts in Thermoflow programs 3- Multi Point ... Assumptions > ST mechanical loss as a % of ST expansion](https://static.fdocuments.in/doc/165x107/5b5b59d67f8b9ac7498de143/welcome-webinarswebinar-6-matching-st-thermoflow-training-2-.jpg)
Ap thermoflow n32
1
Click here to load reader
-
Upload
dau-nhot-ap-oil-saigon-petro -
Category
Business
-
view
183 -
download
2
description
Tư vấn miễn phí & Đặt hàng dầu truyền nhiệt ( 0908.131.884 Anh Quyền ). Công ty TNHH TMDV Hoài Phương là nhà phân phối dầu nhớt , mỡ bôi trơn cấp 1 của AP Oil Saigon Petro khu vực miền đông nam bộ. Cam kết các sản phẩm Chất lượng Quốc Tế - Giá cạnh tranh - Giao hàng nhanh - Hậu mãi chu đáo
Transcript of Ap thermoflow n32
Due to continuous research and development,
the above typical data is subject to change without notice.
The information should not be regarded as legally
binding assurance of any properties or suitability for
any particular application.
AP Oil International Limited30 Gul Crescent, Jurong, Singapore 629535tel 65 6861 5503 fax 65 6861 9162www.apoil.com.sg
tech
nic
al d
ata
tech
nic
al d
ata
tech
nic
al d
ata
AP THERMOFLOW
HEAT TRANSFER OIL
DESCRIPTION
AP THERMOFLOW is heat transfer oil formulated with highly refined paraffinicbase oils and special additives. The oil, with high flash point and low volatility,exhibits good oxidation and thermal stability.
BENEFITS
Minimum sludging and fouling Improved oxidation and thermal stability Excellent heat transfer property Extended oil life
APPLICATION
AP THERMOFLOW N is for use in enclosure circuit heat transfer systems with oiltemperatures up to 300C.
TYPICAL SPECIFICATION
GRADE METHOD N32Kinematic Viscosity, cSt
@ 40oC@ 100oC
ASTM D445ASTM D445
325.4
Viscosity Index ASTM D2270 105Flash Point (COC), oC ASTM D92 220Pour Point, oC ASTM D97 -15Fire Point, oC ASTM D92 258Autoignition temperature, oC ASTM D2155 370
Boiling Point, oC ASTM D86 >316Specific Heat Capacity, kJ/kg*K, @100 oC - 2.18Specific Heat Capacity, kJ/kg*K, @150 oC - 2.36Specific Heat Capacity, kJ/kg*K, @200 oC - 2.54Specific Heat Capacity, kJ/kg*K, @250 oC - 2.71Conradson Carbon Residue, %wt ASTM D189 <0.05Copper Corrosion(3hr@100 oC) ASTM D130 1bTAN, mgKOH/g ASTM D664 0.18Ash content, %wt ASTM D874 0.04
