“Better solutions for “Better solutions for those who wish to alter … · 2012. 5. 16. ·...

“COMPANY OVERVIEW “ COMPANY OVERVIEW “ COMPANY OVERVIEW “ COMPANY OVERVIEW “

WHO WE ARE & WHAT WHO WE ARE & WHAT WHO WE ARE & WHAT WHO WE ARE & WHAT

WE DOWE DOWE DOWE DO

A comprehensive Business Model dealing with today’s needs 1

We are providing you with confidential information regarding Allied green, LLC and affiliate's. By accepting and / or reading this information, you voluntarily

accept the standard Allied Green, LLC’s “Non-Disclosure, Non-Circumvent, and Non-Compete Agreements”. In case you do not have an original, please contact us

immediately in order for us to supply you immediately with a copy. Not doing so, will not release you of the obligations stated in our above-mentioned agreement.

Allied Green – World Wide Services

Allied Green, LLC Contact Information:Roy Bowles [email protected] 702-343-1273 (cell) Jonathan Hampton [email protected] 702-425-3217 (cell)

(SG) 65 922 35 181

Barry Greene [email protected] 702-460-4502 (cell) Doyle Kolle [email protected] 512-925-3737 (cell)

Linda Lipinski [email protected] 702-343-1274 (cell)

“Better solutions for “Better solutions for “Better solutions for “Better solutions for those who wish to alter unwanted those who wish to alter unwanted those who wish to alter unwanted those who wish to alter unwanted environmental conditions”environmental conditions”environmental conditions”environmental conditions”

We provide technologies that are Environmentally friendly, Life enhancing

Economically viable, Universally beneficial

2

Table of ContentsTable of ContentsTable of ContentsTable of Contents

Cover Sheet 1Table of Contents 2Allied Green, LLC The Company Focus 3 Allied Green Company Principals’ & Bios 4Allied Green Support Team Bios 5Allied Green Strategic Partners 6 Strategic Companies 7Partner Companies & Technology 8 Geopolymer Ceramic Concrete & Basalt Reinforcement 9 Geopolymer Ceramic Concrete & Basalt Reinforcement 10 Our Products & Characteristics, Mix Designs 11 Mix Designs for Products 12 Green Structure Technologies 13Ceramic Concrete Advantages 14Geopolymer Ceramic Concrete Construction Technologies 15Geopolymer & Basalt Properties & Ceramic Cement 16Characteristics Geopolymer Residential Construction Components 17PolarSun Energies Introduction 18PolarSun Energies Solar Thermal Technology 19PolarSun Technology and its Impact on the Industry 20PolarSun Energies System 21Walker Solar Introduction, What are MOGS 22Walker Solar the Product and what it does 23Water Desalination/Purification Summary Data 24Water Desalination/Purification Summary Data 25Treat-Tec Systems 26Treat-Tec Sewage Treatment Advantages over Traditional 27Systems Treat-Tec Corporate Structure 28Treat- Tec The Biomast & Management Bios 29Treat- Tec Management Bios 30

ThermaCote Company 31ThermaCote Product & Specifications 32HarvestVillage Market, Hydroponics & Fish Aquaculture 33HarvestVillage Market, Business 34HarvestVillage Market, Business & Concept Advantages 35HarvestVillage Market, Ownership & Business Operations 36HarvestVillage Market, Hydroponics & Fish Aquaculture 37HarvestVillage Market, Hydroponics & Aquaculture 38Embrace the future 39

Allied Green LLC Allied Green LLC Allied Green LLC Allied Green LLC ---- The Company FocusThe Company FocusThe Company FocusThe Company Focus

Allied Green, LLC is a Worldwide ‘green’ based dynamic operation positioned to penetrate and takeadvantage of the enormous energy saving products market sector throughout the US and Worldwidemarkets with its unique energy saving technologies.

Allied Green is founded by experienced professionals committed to continuously developing andproviding the latest energy saving technologies through its worldwide product research andmanufacturing centers.

Allied Green in 2012 will begin implementing and expanding manufacturing facilities to meet andgarner a market share of the critical and burgeoning demands that Allied Green products will commandin the US and the Worldwide market place.

Allied Green is firmly committed to improving the environment and making our world a better placethrough the development and implementation of our innovative, environmentally safe and leading edge‘energy saving’ products for homes and businesses throughout the World.

Allied Green, LLC qualifies as a Veteran owned, disabled Veteran owned, Native American owned andwoman owned business.

Allied Green is currently establishing major manufacturing facilities for their products and will soonbegin providing high quality, economical, and energy saving products for implementation into its ownprojects and for sale into the commercial and residential building industry in the US and Worldwidemarkets.

Roy Bowles

Director

Roy Bowles is a mechanical engineer as owner/operator of his consulting firm he has worked on a wide variety of projects, both domestic and international, including hospitals, casinos, hotels, government buildings, and industrial facilities. His experience also extends to areas such as land selection, appraisal, cost development and analysis, construction management, design build, and regulatory code compliance. Mr. Bowles served in the United States Marine Corp during the Vietnam conflict and is a decorated combat infantryman. His love for his country has dedicated him as a provider to humanitarian needs throughout the world. Three decades of experience have led him to the eco-friendly philosophy that is Allied Green, LLC, the tool to provide the needs of the people of the world. This includes support for our veterans, providing housing for the homeless, hydroponics, Aquaculture, Solar thermal heating & cooling, and projects that are off grid. The change is here.

Barry Greene

Director

Barry has done architectural work for a variety of projects and has extensive experience designing both environmental and industrial structures. His philosophies of design is to first understand “what” is needed or desired, and then create designs that satisfy those needs in a natural, balanced, and harmonious way. His current focus, other than AG, is on energy efficient and environmentally friendly applications. His work with the team ensures that each and every aspect of our facilities are sound, efficient, and sustainable.

Doyle C. Kolle

Director

Mr. Kolle, cum laude graduate of Texas Christian University in Ranch Management, has worked successfully with 14 years’ experience in commercial real-estate development, co-founder of aquaculture farming operations on Texas Gulf Coast and 8 years national corporate product marketing expertise. His past 10 years has been engaged in consulting in renewable energy industry for project assessment, technology evaluation, and business plan writing. Mr. Kolle’s knowledge of project coordination and implementation along with his vast experience in product marketing lend a broad perspective for a project’s management including overall strategy planning and implementation.

Jonathan Hampton

Director

Mr. Hampton, the inventor of Multi-Board has more than thirty-three years in the design/build field of concrete structures, including schools, commercial buildings, churches, and residences. He has served as a consultant to the concrete construction industry in the United States, Southeast Asia, the Ukraine, and the United Kingdom. He has spent over four years in pure research and development as well as provided inventions and consultation in the geopolymer, ceramic, and hydrolytic cement binder technology arenas.

4

Allied Green, LLC Allied Green, LLC Allied Green, LLC Allied Green, LLC

Principals’ BiosPrincipals’ BiosPrincipals’ BiosPrincipals’ Bios

Linda Lipinski

Director

Linda is a retired New York State employee providing 32 years of state service in business accounting and secretarial positions at the following state facilities: Western New York Developmental Disabilities, Services, JN Adam Developmental Center, Research Institute on Additions, Gowanda Psychiatric, Center, and New York State Department of Labor.

Allied Green Support Team Allied Green Support Team Allied Green Support Team Allied Green Support Team BiosBiosBiosBios

Zaki Diab

International Finance Specialist

Zaki Diab is an educated banker that has worked after his studies in various industries as a consultant over the past 25 years. His experience includes industries like aviation, automobile, manufacturing, transportation, logistics and development as well asinternational trade and relations. His visionary thinking and analytical approach are the foundation to a motivational management style that is respected by both clients and team members.

Dan Sledge

Project Management and Financing Specialist

A graduate of N. Texas University, Dan is the owner of Advanced Insulation of Texas. Dan has been a General Contractor and a Senior VP in the Savings & Loan Industry . His experience includes the ability to make sound financial decisions with management skills regarding supply ordering, job costing, and working with government entities. Dan has worked in the green building industry a number of years and brings in-depth experience to Allied Green’ projects.

5

Allied Green, LLC Allied Green, LLC Allied Green, LLC Allied Green, LLC

Principals’ BiosPrincipals’ BiosPrincipals’ BiosPrincipals’ Bios

Greg Groleau

Construction Manager

Greg was responsible for all aspects of the preliminary and construction phases for Grandstay Residential Suites project located in Oxnard, California. Among these responsibilities is site location, site processing, permit processing, on-site project management. In this position, the owner is able to capitalize on my long-term

relationship and intimate construction knowledge of existing Grandstay Residential Suites hotels. He will have same responsibilities for future projects with Grandstay.

Theresa Mordaunt

Structural Engineering

Theresa has provided structural engineering services for various projects across the Las Vegas valley, most notably at the Paris Hotel and Casino, where she completed structural design for the foundation of the Eiffel Tower replica. Her experience encompasses many public and federal building projects. Ms. Mordaunt’s design/build construction and inspection experience lends itself towards economical & practical solutions to complex design challenges. In addition, she has performed numerous structural analysis andfeasibility studies.

Michael Mlazgar

Lighting Specialist / Engineering

Michael Mlazgar has been involved in commercial, industrial and architectural lighting and control design since joining the family agency 30 years ago. His work also includes military, agricultural and automotive innovations. Specializing in applications, he has provided commercial lighting and lighting effects to the Las Vegas market for over 16 years, including major projects such as the New York New York and the Stratosphere Tower.

Stanley P. Jensen

Mechanical Engineer, P.E.

Stan’s experience encompasses 30 years as a mechanical engineer and project manager. Projects encompass hospitals, casinos, hotels, government buildings, industrial facilities and nuclear facilities to include energy management. Stan is currently registered as an

professional engineer in California, Nevada, New Mexico and Washington. Stan is active in ASHREA and was the former mid Columbia chapter president.

6

Allied Green Support Team and BiosAllied Green Support Team and BiosAllied Green Support Team and BiosAllied Green Support Team and Bios

AG Pureflo Systems

PolarSunEnergies

AG Solar Products

TREAT-TEC SYSTEMS

HarvestVillage Market

7

ARI KAT PTE LTD

STRATEGIC PARTNERS

Partner Companies and TechnologiesPartner Companies and TechnologiesPartner Companies and TechnologiesPartner Companies and Technologies

THE FOLLOWING ARE COMPANIES WHO ARE

STRATEGIC PARTNERS OF ALLIED GREEN, LLC AND

INCLUDES A SUMMARY OF EACH TECHNOLOGY AND

HOW THAT WILL IMPACT OUR ENVIRONMENT IN A

POSITIVE WAY THROUGH DRAMATIC COST EFFECTIVE

ENERGY SAVING PRODUCTS.

8

GEOPOLYMER CERAMIC CONCRETEGEOPOLYMER CERAMIC CONCRETEGEOPOLYMER CERAMIC CONCRETEGEOPOLYMER CERAMIC CONCRETE

& BASALT REINFORCEMENTBASALT REINFORCEMENTBASALT REINFORCEMENTBASALT REINFORCEMENT

Allied Green, LLC’s Director and technology developer Jonathon Hampton has developed and commercialized premiergreen building products for replacement of steel and Portland cement. Through Allied Greens subsidiary productmanufacturing company of ‘Geopolymer Building Systems’ Allied Green provides a highly durable and economicalsolution to the “Green” building industry. This company will provide economical building products for off grid residentialand commercial buildings with dramatically lower energy requirements through its unique building methods for fasterection of total building systems including structural skeleton, floor, wall and roof systems.

Geopolymer Building Systems has several new innovative technologies for use in housing, commercial and industrialprojects. One new material is mineral-based foam, which has a higher "R" value than fiberglass and cellulose insulationsthat has none of the myriad of negative aspects associated historically with such products.

This product allows for the production of a totally fireproof, waterproof, vermin proof, mold proof zero VOC StructuralInsulated Panel that can even utilize indigenous and post consumer waste fillers and ingredients.

Evaluated in the area of aeration technology, testing resulted in the strongest and most effective pre-formed foam to haveever been tested by recognized experts in the field of aerated cellular concrete.

Geopolymer Building Systems has developed specialized products and methods for universal utilization, which allows forthe use of mineral based ceramic cement products for all aspects of the construction of a building. These green ratedproducts are capable of creating a FEMA style building material that would not be a health hazard to the occupants.

We have a new method called the unified Earth cycle materials processing system. The unified Earth cycle materialsprocessing system demonstrates the potential to be a unique, state-of-the-art method to significantly lower the cost of ouressential Ceramic Cement raw materials to be price competitive to Portland cement. Currently, mineral / hard rock minedmagnesium and phosphate commodity pricing result in ceramic cement being more expensive than Portland cement. Thekey to significantly reducing this cost disparity is our identification of independently developed, state-of-the-art materialsprocessing technologies that can immediately be unified into a turn-key operation that cost-effectively and responsiblyretrieves, powders, dehydrates, molecularly separates and calcites currently irretrievable waste stream materials. Throughthe use of local waste streams ranging

9



from agricultural, industrial, marine and food waste, to municipal wastewater, manure, sludge, ashes, etc., this will provide essential ceramic cement magnesium / phosphate raw materials. Additionally, other valuable material extracted for resale includes nitrates, calcium, potassium, and precious minerals / metals. As an added benefit, and unlike current industry material processing systems, the advanced materials processing technologies that make up the integrated Earth cycle system can be scaled from tabletop sized laboratory systems to large capacity industrial models Our Earth cycle waste stream recovery research has also gained us the first of several related patent applications (see www.uspto.gov / US Pat. App. No. 20080206128).

We have developed ceramic concrete that has a compressive strength in excess of 20,000 psi. with a much lighter weight than Portland cement.

We are perfecting formulations that will result in phosphorescent concrete for use on roadways and airport runways. This is achieved a couple of ways one being the use of luminescent microspheres in conjunction with chemilumenescent additives in the cement.

We have new products such as Vacuum Insulated Panels possessing "R" values of 50 per inch, chemilumenescent concrete (mixes that glow in the dark due to chemical elements) and Phosphorescent concrete (concrete that will luminescent in the presence of HF electricity).

We have developed a combination of mineral processes that will totally redirect the building construction industry. These combinations and mix designs allow the reduction of weight of concrete to less than 10 pounds per cubic foot and design strengths in excess of 10,000 psi. Concrete beams can bend under pressure and return to their initial set when the pressure is removed. Reinforcement and structural shapes are created with Three times the strength and one-fourth the weight of steel using 100% mineral fiber.

The products that we produce are made from mineral based binders and post consumers waste such as glass, wood, paper, sludge (including sewage),and landfill (including fly ash).

10



Our products can be designed to provide the following

characteristics:

*fire-proof

*water-proof

*mold-proof

*mildew-proof

*bullet-proof

*sound-proof

*controlled thermal insulation value

*light weight

*high strength/fast setting

*post consumer waste

*unlimited shape and/or form

*can be cast or extruded

*enhances LEED credits

*provides CO2 credits

The ranges of uses for our products are limited only by the

imagination…such as:

*building construction--- residential, commercial,

industrial, hospitals, hotels, Institutional, etc.

*road, highway, bridges, railroads, ports, terminals,

storage, etc.

*marine-auto-agricultural

*fire-proofing, water-proofing & sound-proofing of

existing facilities

11

Geopolymer mix designs that we have developed with wide range of use

are as follows:

NANO: Technology micro-grinding corrosion proof concrete reinforced

products, micro fiber (Structural Fiber) technology.

CSIP: Concrete structural insulated panels provide mix design that resolve the

thermal bleed issues and replace Styrofoam with recycled glass. It provides

fireproof-waterproof structural skin.

BLOCK: Light weight (50% weight of CMU) high strength, waterproof, fireproof,

can nail or screw into product.

RED IRON: Spray on fireproofing (lighter and more effective than mono-Crete).

STRUCTURAL CONCRETE: Light weight (50% the weight of Portland concrete),

high strength (in excess of 10,000 psi), fireproof and waterproof. It set in

hours, rather than days. It can be made with high percentage of post-consumer

waste (sawdust, glass, paper, concrete, sludge, etc.).

WALLBOARD: Will replace gypsum board, plywood, OSB, and cement backer

board. It can be used as shear panel to replace plywood and is fireproof,

waterproof, mold and mildew proof and insects do not attack it. It can be

manufactured in various thickness or thin sheets can be laminated. Design and

patterns can be integrated.

RAILROAD TIES, FENCE POST: Same as above

REFRACTORY BINDER MIX: Can resist in excess of 4,000 degrees C.

ROAD PATCH MIX: It is high strength, high impact resistance and is used with

concrete or asphalt. It can be returned to service within one hour of application.



DIMENTIONAL LUMBER/BEAM REPLACEMENT: It does not warp, split, rot, etc. and can be nailed, screwed or stapled.

COUNTER TOPS, CABINETS, FURNITURE: Same as above

STUCCO: Post-consumer waste utilization, fireproof, waterproof, and can be designed to be bulletproof and blast-resistant.

ROOF TILES: Light weight, fireproof, waterproof (can be designed to match any existing roof tile pattern).

FIRE DOORS: Fireproof, light weight core material.

RADIATION: Attenuation, shielding, absorbsion includes x-ray and gamma ray management mix.

ELECTRO-MAGNETIC: Pulse (EMP) shielding.

BATTERY BANKS: For electric vehicles, fireproof, blast resistance and acid resistance.

LIQUID NATURAL GAS STORAGE (LNG): Total fire resistance.

FLOORING MIXES: Lightweight, high strength, fireproof, high insulation quality.

ENCAPULATION OF VARIOUS WASTES FROM SLUDGE AND MINE TAILINGS

MAN-MADE AGGREGATE: Light weight, utilization of waste, proven to fully look up any heavy metals.

12

ALTERNATE BINDERS: Replace epoxy presently being used in

FRP and basalt rebar manufacturing.

NEW BINDERS: For various products currently being made with

epoxy, urethanes, phenolic, formaldehydes, etc.

NOVEL MIXES: For insitu spray applications.

AERATED MIX: For aerated cellular concrete.

RED MUD UTILIZATION: Mixes for ponds, river banks and

irrigation canals.

SOIL STABILAZATION: Mixes for insitu application, road

construction, dust control, levee and dike remediation etc.

SPECIALITY COATING: For gas pipe (sulfide attack resistance).

REPLACEMENT FOR: Lightweight insulative mineral based foam

which has been banned in some states.

BUILDING SYSTEMS: Off the grid or in third world countries that

utilize indigenous materials with low process requirements can

take full advantage of our system.



Green Structure Technologies:

The primary shell of Allied Green Structures is composed of two unique technologies that replace primary existing concrete, steel, and wood building systems and products in use around the world. In both cases, the reasons to do so are both economic and environmental. Both technologies offer strong economic and environmental incentives to convert existing methods at a global level. Therefore, a global market is the potential for both of these system applications. Concrete is historically one of the worst polluting industries on the planet. Wood construction not only has a significant negative impact but also creates structures with a short lifespan and an inability to handle disasters of any kind.

We intend to:

� Construct all green structures projects using these technologies

� Produce and market these building systems and materials to a waiting global construction market that is strongly motivated for and receptive to this transition

� In both cases, the raw materials are available worldwide utilizing a never-ending recyclable waste system.

� In addition, this will create multiple sustainable technologies to market that are compatible with the Green Structures technologies. The intention is, to both utilize these technologies for Green Structures projects as well as market them as individual capabilities. This vital combination not only creates a template for true sustainable off grid commercial and residential structures that can be duplicated worldwide, it also enables sustainable technologies to convert the most environmentally damaging waste steams intomarketable green by products.

Ceramic cements:

In addition to replacing concrete as a primary construction material, ceramic cement is also capable of making cabinets, countertops, automobile components, ships, engine components, drywall replacement, furniture, window frames, roads, bridges, runways, bricks,pavers, decking, railroad ties and high volume production molds of any size. This material can also be mixed with any rock, soil, vegetation, or waste material. It is our intended mission to demonstrate economic justification for converting all existing concrete plants to this technology.

Other components of building with Green Structure:

In addition to utilizing all the above components building with Green Structure, Allied Green Structure will utilize available technologies like high shielding glass or photosensitive glass as well as radiant barrier coating and ceramic paint. All these components will increase the “R” Rating of a structure and be a factor in providing an energy efficient building.

Even with a little higher cost of some of the additional materials, a significant cost saving in manufacturing and building will be achieved over any of the existing methods. By being self sufficient, additional savings on energy consumption will bring the cost of operation to a point that it will have a positive impact on the owner, operator, or occupant of our space enclosures. 13



There are many advantages of our

systems, among them are:

*lower construction cost

*shorter construction time

*site specific material use

*portable equipment

*re-use of rubble & waste material

*ease of foundation stability

*light weight & fast curing time

*use of minerals available in vicinity of projects

*unlimited architectural and engineering

design considerations

*ease of construction worker training

*ease of building code compliance for fire,

wind, waste, water, and seismic considerations

*introduction of the potential that lives in “the

world beyond the landfills”

14

Ceramic Cement Fire Proof Testing

Duration 18 minutes and still going

15

Ceramic Construction Technology

Basalt Properties

� Stronger and lighter

� More durable

� No oxidization or corrosion

� Superior thermal protection

� Fire resistant

� Superior insulation quality

� Significant sound attenuation

� Natural, inert product

16

Ceramic Cement

� Stronger and lighter

� Superior bonding properties

� Faster Setting

� Rapid cure time

� No shrinkage

� Non conductive

� Completely fireproof

� No off gassing of hazardous

fumes

� Ceramic cement/basalt construction

� Driven at point load locations

� Extend full height of the structure

� Piers are set and plumbed

17

Residential Construction Components

� Ceramic cement construction

� Extend full length of each wall

� Form framework for wall panels

� Hollow basalt rebar tube

� Basalt post tension cableL Beams

� Ceramic cement/basalt construction

� Engineered to specifications

� Panels affix to L Beams

� Seams sealed with ceramic cement

� Rapid installation

Exterior Wall Panels

� Ceramic cement panel

� Basalt mesh reinforcement

� Affixed to L Beams

� Seams sealed with ceramic cement

� Creates monolithic structure

� No exterior cladding required

� Full range of colours available

Floor Panels Installation

Floor Panels Installed

Second Floor or Roof Panels InstalledHelical Piers

Floor Panel

18

PolarSun Energies Thermal Air Conditioning

SEER ratings from 26.0 to 32.3

World Corporate Office

Hong Kong

US Sales & Marketing

Henderson, Nevada

Manufacturing in

China and

Puerto Rico

Thermal Air Conditioning System

Puerto Rico, Installation

Dec. 14, 2011

Polar SUN Energies

2 Ton Unit

Amp draw is 5.0 Amps

PolarSun Energies Thermal Air Conditioning“A New Technology” In 2012

AC Units operating off grid using Solar Thermal panels and Walker Solar MOGS providing DC power to compressor, fan motors and controls.

Management Contact InformationRoy Bowles [email protected] 702-343-1273 Alan Verhonich [email protected] 904-508-2612

Doyle Kolle [email protected] 512-925-3737

SOLAR THERMAL AIR CONDITIONING OPERATION

PolarSun Energies - An Allied Green Partner Company

The original US “Solar Thermal Air Conditioning” company was established in April 2009 in Jacksonville, Floridaby Alan Verhonich, who is the inventor, owner and operator of the air conditioning patented processes. After asuccessful two year period of manufacturing and sales, PolarSun Energies has been formed and established withnewly focused ownership and direction.

Mr. Alan Verhonich, the technology developer, has over 36 years of experience in the air conditioning/heating industrywith detailed studies in Mechanical Engineering, and with over four years of intense research and development in thefield of heating, ventilation and air conditioning.

PolarSun Energies, as the new and dynamic product marketing company, is well positioned to penetrate and takeadvantage of the enormous air conditioning market sector throughout the US and Worldwide markets with itspatented energy saving systems.

PolarSun Energies, with strategic funding, will implement its manufacturing facilities to meet and garner its marketshare of the critical and burgeoning demands the PolarSun Energies' air conditioning products will command here inthe current US and the Worldwide market place.

PolarSun Energies is committed to improving the environment and making our world a better place with thedevelopment and implementation of its leading edge energy saving products into homes and businesses throughoutthe World.

With the establishment of Worldwide manufacturing facilities for PolarSun Energies products, the company willbegin providing high quality, economical air conditioning and heating systems which are extremely energy efficient.This newly designed and patented solar thermal energy applications will totally revolutionize the existing industry bydramatically reducing AC/Heating energy requirements.

19


The PolarSun Technology and its Impact on the Industry

PolarSun Energies has fully developed its innovative and extreme ‘industry changing’ patented solar thermalcollector processes for air conditioning/heating systems making them the most energy efficient systems in the worldmarket today.

This ‘revolutionary’ solar thermal process technology, once manufactured in the US and soon to be manufactured inChina, will provide a quality made product at a competitive price for value to the consumer.

Using the patented “PolarSun Energies” conditioning/heating systems process, both residential and commercialconsumers will realize energy cost savings between 30-51% on their electricity use for cooling and heating over andabove the standard high efficiency units the current industry provides.

For even greater efficiencies, the warmer the customers’ climate, the more efficient the solar thermal air conditioningsystems will function due to the solar thermal processes that reduce the electrical demand.

PolarSun Energies is the GREENEST, most efficient way to cool or heat your home and business. The realizedsavings will more than pay for the complete system in TWO years or less and simultaneously help the environment bysignificantly reducing the production of CO2.

In addition, air quality of the PolarSun Energies' system is greatly improved by removing the moisture from the airin your home or business location and blowing colder air during those hot muggy days!

PolarSun Energies quality products are a win-win situation for the contractor and the consumer with the provisionof a ‘satisfaction guaranteed’ performance bond backing on all their manufactured product’s warrantees.

20


The PolarSun Energies systems are similar to a regular air conditioning system in that the refrigeration takes place by evaporating liquid with a very lowboiling point. In both cases, when a liquid evaporates or boils, it takes some heat away with it, and can continue to do so either until the liquid is allboiled, or until everything has become so cold that the sub-zero boiling point has been reached. The difference between the two is how the gas is changedback into a liquid so that it may be used again. A regular air conditioning system uses a compressor to increase the pressure on the gas, forcing it tobecome a liquid again through the use of the condenser coil. The change of the state of the refrigerant starts to take place approximately two thirds of theway down the condenser.

The PolarSun Energies conditioning system uses a vastly different method. It uses the solar heat from the sun to superheat the refrigerant, whichenables the refrigerant to begin changing state at the TOP two thirds of the condenser coil. By using this method it reduces the superheat component ofcompression required to achieve the cooling process in the conventional cooling systems as well as utilizing more of the condenser cooling face of the coil.The conventional air conditioning system is only able to change a portion of the gas into a liquid state. When the refrigerant enters into the meteringdevice it is a saturated vapor. This process allows more of the refrigerant to change its state back into a liquid faster as well as allowing the transformationof more liquid into the metering device.

In everyday weather environment conditions, the PolarSun Energies conditioner uses the sun as a source of heat to provide the thermal energy neededto drive the cooling process. This process is very efficient since most of the condenser and evaporator coil face is being utilized in contrast to the standardair conditioner. The applied thermodynamic process is not a conventional thermodynamic cooling process based on Charles Law. Instead, it is based onevaporation….carrying heat in the form of fast-moving (hot) molecules from one material to another material that preferentially absorbs hot molecules.The system then cools by the evaporating liquid refrigerant. The Solar Absorption medium inside the solar-collector acts as a storage tank to maintain therequired temperatures needed for the cooling process. With the Solar Absorption tank, the cooling process can be maintained for approximately 96 hourswithout the need of the sun's heat. The heated medium also acts as an absorbent to the refrigerant through the solar collector process. Through this highlyefficient thermal process, the system will greatly reduce the energy required for the cooling of the controlled space.

21

The Solar Thermal Aire Cycle

What is a “MOGS?”

22

� Walker Solar’s proprietary design can provide electricity anywhere it is needed.

� The system is composed of:

� A custom designed all steel and aluminum housing,

� One or more world class inverters to change DC to AC, a charge controller-conditioner,

� And special solar storage batteries.

� The MOGS can act as an emergency backup generator

� It can be used full time to power various household, commercial or industrial items

� It can send excess energy back to the grid to reduce billing

� It can do all three of these at ONCE!

� No problem! The MOGS instantly takes over

� It will run a refrigerator, lights, a TV, computers,

� And depending on the model you choose, a well pump to keep your water on

� All of this and more for up to a week

� Even longer if you have solar panels!

WHAT CAN THE MOGS ? DO ?”

WHAT IF THE GRID GOES DOWN ??

HOW CAN THE MOGS BE USED?

� MOGS is Walker Solar Products name to represent

the Mobil Off Grid System!

� It is our trademarked and patent pending answer to off grid electricity for all people everywhere.

� Whether it’s residential, commercial, industrial or municipal, The Walker Solar MOGS is the solution.

What Does it Look Like?

23

Can We Get Customization?

• Absolutely. The MOGS can be customized to fit

your situation.

• From custom colors

• To five different sizes

• The Walker MOGS can be built to please

• The MOGS (mini) used by Homeland Security is strictly DC power, with a charge controller, 24 volt battery array, and shielded enclosure.

• The 1.0 is a pure sine (pure energy) inverter, 80 amp charge controller, and a 24 volt battery array.

• The 2.0 is a pure sine inverter, charge controller, and 48 volt batteries.

• The 3.0 that includes a second inverter and is designed to deliver 110 volt AC and 240 volt AC and can run a pump without breaking a sweat.

• The rest of the MOGS is a bit of a secret, but you can explore yours to see if you can figure it out!

What’s Under The Hood?

• State of the art monitoring is standard with all

MOGS

• It’s not simply looking at the LCD screen to see how

your system is working

• We also have programming that is based on

extensive research.

• The programming is also included, but you can

customize as well.

How Do You Control It?

Are You Still Paying For Power???

Water Desalination/Purification Water Desalination/Purification Water Desalination/Purification Water Desalination/Purification Summary DataSummary DataSummary DataSummary Data

The AG Pureflo mechanical purification water solution generates pure drinking water without the use of chemicalintervention and it does so in a manner that’s environmentally constructive.

The revolutionary “AG Pureflo” system’s molecular separator system is a filter-less process which is capable of efficientlyprocessing sea water, and additionally processes industrial waste and sewage water exceptionally well.

For each type of water processed, the AG PureFlo system technology sterilizes and extracts whatever is not pure water fromthe intake stream and discharges it into a separate concentrate. Waterborne bacteria are also eliminated during theprocessing.

AG Pureflo Desalination Plant Will:

• In many cases produces water with less than 50 TDS ppm vs. 75-125 TDS ppm for most RO systems

• Delivers a large scale operational plant in less than 12 months, guaranteed

• Uses 8-10watts/Imperial gallon vs. -22 watts/Imp gallon for RO systems

• Uses no chemicals and emit no noxious fumes

• Does Not return higher salt content water than water at the plants inlet

• Requires only 3-6 technicians for “large” scale operations and can be trained in one week with the O & M’s greatly reduced vs. RO designs.

• Allows for rapid output increases (262 GPM per 22”x58” size stack) simply adding additional stacks.

• May be repaired or maintained without interruption to the plants output

• Utilizes smaller area (40% less vs. RO) for overall desalination plant site operations due to decreased evaporation pond size needs.

Overview

The AG PureFlo system desalinates water using a proprietary harmonic profile process, while analyzing the water real time;then targets and manipulates the molecular structure of those identified elements and compounds in a given water stream.This phase causes the salt to rapidly crystallize. The salt crystals and any other elements or compounds (not H2Omolecules) are then spun out using a “Hydro Fuse” (centrifugal extraction system).

PureFlo water is treated real-time without requiring the below elements or stages which slow down the process and ofcourse requires power that the PureFlo system does not. 24

By utilizing the AG PureFlo System for desalination, there is no need for the following:

• Aeration Basins

• Air Diffusers

• Mixers

• Polymer Injection Systems

• Cake handling systems

• Clarifier systems

AG PureFlo’s Multi Stage System

• The AG PureFlo system design includes sequential phases that ensure consistent production at required volume of desalinated water.

These phases enable:

• A system capable of rapid output growth at a fraction of the cost of RO or other desalination plants.

• A system capable of handling up to twice normal output shock loads or surges in customer demands

• A system which allows less than 4 weeks system in operability for repair due to component failure from natural disaster or sabotage and no impact on flow rates for maintenance.

Portability

In addition, the AG PureFlo system design allows for mobility by accommodating the installation onto skid type units for rapid deployment into disaster areas and is ideal for economical implementation into emergency uses on short-term and or long-term basis. These skid type units can easily be trailer mounted and provide expedient volumes of potable water (262 GPM per stack)to a large number of people very quickly and efficiently. In addition, with Texas and other coastal states that are a threat by hurricanes, the purification systems (being built into large skid type units for desalination plant operations) can be simplydisconnected and removed to higher ground.

25

Water Desalination/Purification Water Desalination/Purification Water Desalination/Purification Water Desalination/Purification Summary DataSummary DataSummary DataSummary Data

Treat -Tec Systemsan Allied Green Partner

Executive Summary

The BioMast/Biosof technology is a containerised sewage treatmentsystem capable of treating sewage type liquid organic wastes ofbiodegradable waste materials, without the use of extraneousenergy. The BioMast/BioSof technology is a more sustainablesolution with a significant advantage over congenital systems due tothe dramatic reduction of the use of energy in the treatment ofsewage type waste streams. Energy required for the system is tooperate a feed pump to introduce the effluent to the treatment unitand a smaller lift pump to move the liquids to a second level. Thecommercial expansion of this technology is particularly appropriateat the present time with increasing prime energy costs andincreasing pollution discharge costs as legislative imperatives areadopted as mandates to improve environmental aspects.

This technology has been operating in Belgium for a number ofyears as a full-scale commercial demonstration of the systemscapabilities.

More recently the efficiencies have been advanced through efforts ofworld renown microbiologist Dr. David Stafford who was retained toimprove upon the special features of the BioSof technology’sprocesses. This has lead to lowering the operational cost of suchplants even more over conventional sewage treatment systems.Installed plants using this technology will positively contribute tonational compliance with reductions in effluent BOD/CODdischarges as a direct result of its accelerated and efficient processes.This unique reduction process also saves significantly on carbondioxide produced emissions which are reduced or replaced by usingless hydro carbon power or by instead utilizing solar PV power as theenergy source to treat the waste.

26

TREAT-TEC SYSTEMS

“Containerized Low Cost

Low Energy Sewage Treatment”


As the systems marketing company, Treat-Tec was founded in 2010 and is headquartered in Bastrop, Texas, United States of America and isstaffed with a core ownership group of 4 principals.

Treat-Tec has contracted with the Belgium company of Biomast, the marketing rights to the BioSof waste treatment technology fordistribution on the North American continent.

.

Treat-Tec an affiliate and in cooperation with Allied Green, LLC is responsible for project assessments, installation and maintenancepersonnel training of the systems and will initially enlist approximately 10 other consultants worldwide with whom it’s principals currentlycollaborate as partners, agents or researchers.

The majority of the “people-heavy” construction/installation work will be handled by external local contractors, and with the collaboration ofthe company of BioMast and whose internal fundamental process design with biological or chemical analyses will be undertaken by thepermanent staff of Treat-Tec.

27

Treat-Tec Sewage Treatment Advantages Over

Traditional Sewage Treatment Systems 1. Reduced construction time and operational capital cost per resident

2. Reduced energy requirements

3. Decreased water usage

4. Lower installation costs

5. Improved and more economical ‘on-going’ cost of operations with less labor

required

6. Limits off-gassing of odorous emissions through carbon filtration prior to

release

7. Smaller footprint which is advantageous where land area is limited or very

expensive

8. Containerization allows for enclosed treatment prior to discharge of

wastewater

9. CO2 abatement through air emission filtration

10. Easily hidden from sight inside building structures and or landscape materials

11. Expandable in treatment capability by readily adding an additional unit

Performances and GuaranteesThe station allows elimination of organic polluters

present in used water, in particular:

•SS (suspended solids)

o COD (chemical oxygen demand)

o BOD (Biological oxygen demand)

•Total nitrogen

o Phosphorus

o Pathogenic agents

o Micro-pollutants


Corporate StructureAllied Green, LLC is responsible as the project manager, and will oversee permitting, engineering reviews, project costs and overallmanagement of construction design for the sewage treatment systems.

TREAT-TEC as systems marketer is staffed by the technical advisory consultancy of Dr. David Stafford, as chief scientist and Mr. JohnBombardiere as technical assistant, have expertise in applied and industrial microbiology, and will assess projects for system qualifyingfactors and oversee its site assessments, installation, commissioning and operational maintenance training needed to maintain its on-going optimum performance.

Technical StaffingTREAT-TEC company is supported by its head technical supervisor Mr. John Bombardiere.Dr. David Stafford provides the scientific support and includes the consulting team that can best meet the needs of assessments foreach future particular project.Mr. Doyle Kolle of Allied Green LLC will provide the marketing expertise for project development coordination and evaluation ofpertinent information to determine the best unit suitability and application of the Biomast/BioSof systems.Mr. Herman Herpelinck will provide the governmental liaison between the providers of the Biomast/BioSof technology and the USAand Worldwide operations.Treat-Tec’s sales agreement with Biomast of Belgium is ultimately intended to be transformed into a manufacturing and sales agreementin and for the North American market.

Technology OutlineDeployment of the Biomast/Biosof technology by Treat-Tec staff expertise provides know-how and technology for the treatment of organic wastes

using proprietary technology knowledge in anoxic and aerobic systems. The specific application of the Biomast/Biosof technology is for the

removal of effluent BOD/COD in sewage treatment to Class A river quality discharge standards. The initial expertise is in developing the technology

and bringing together the technologies and partners.

The key feature of the waste treatment technology is the use of anoxic and aerobic microbes that grow at ambient temperatures to convert the

carbon in organic wastes into carbon dioxide and water. The BIOMAST station works automatically in a hydraulic manner and therefore does not

consume any energy for treating sewage waste water and can be used anywhere. A connection on a closed sewage pipe is enough to let the

installation-filter biologically treat the water and provides a hydraulic retention time of 12 hours. It is a lot cheaper than alternative systems, not

only in capital, but also in maintenance and energy usage. The BIOMAST station can filter the water for an equivalent of from 50 up to 3,000

inhabitants; with multiple units more can be treated. It does not require a lot of space and can even be built partially underground, as well as in a

construction that blends in with the landscape. The technology used by the unit has been based on a process of absorption and natural

degradation of water charged with organic material and works using polystyrene micro-balls of different dimensions that are treated in such a way

that a surface area 100 time larger than those in the traditional systems.28


29

The water purification station “BIOMAST” is built up in 3 layers connected to each other by valves and siphons: the wastewater is assembled

in a relief pit and then pumped to an upper level and is further distributed by hydraulics without any pump to the other levels where the

biological degradation takes place. The first level functions anoxically and partially separates the organic elements. The second level works

aerobically and oxidises the organic compounds and nitrogen. The aeration is entirely natural without use of a compressor or any other

energy using equipment. The third level realises the nitrification and some denitrification.

When the bacterial micro-bed is saturated the whole installation is automatically started when the water flows back to the relief pit. No

automated or other alarm system is needed as no active monitoring is required. Only a small pump is used to pump the wastewater to the

highest level of the station. This pump is working continuously as the station needs a constant water supply in order to function.

For an equivalent of 100 occupants, a supply pump of only 400 Watt per hour is sufficient, meaning 4 kWh per inhabitant per year. For an

equivalent of 500 inhabitants, a pump of 1 kW applies bringing the numbers down to 17.5 KWh. Furthermore this cost can be avoided simply

by connecting the pump to a solar panel or small windmill.

The large (water treatment) engineering firm of Aquafin has provided a preliminary report on the performance of the system and has

concluded that a very high removal percentage of pollutants is achieved by the process. The installation researched reached the most

important design parameters for filtration bed systems. With an influent COD concentration of 9,391 mg/l the unit provided an effluent

concentration of just 53 mg/l a 99.44% reduction. With an influent BOD concentration of 1,750 mg/l the unit provided an effluent BOD of 26

mg/l, a reduction of 98.51%. Other pollutants are also reduced significantly. *(See attached for Aquafin testing report)

Management Bios

Dr. David Anthony Stafford-Scientist

After obtaining his first degree, Dr. Stafford went on to study for his PhD at the University of Wales in Cardiff, UK and also was recognized for

his contribution to education by being awarded a DS at West Virginia State University. Dr. Stafford has developed several types of anaerobic

digester systems, which have been implemented worldwide and is the holder of several patents. He is a Member of the Institutes of Biology

and Applied Microbiology and is also a Member of the New York Academy of Sciences. Dr. Stafford’s interest has covered other aspects of the

environment and has published on the effect of chemicals on human diseases in collaboration with groups in Europe, the United

States and Australia. Dr. Stafford has published several books and over 50 papers in his field of interest, (including aerobic treatment of

organic wastes) and is widely known for his work on biological recycling and in particular the production of energy and fertilizers from

waste organic material. He has collaborated widely on several continents and in particular with West Virginia State University. He is

Managing Director of Enviro-Control Ltd, which provides anaerobic and aerobic treatment processes for the treatment of organic wastes. He

was made an Honorary West Virginian by Governor Caperton in 1995.


30

Management Bios

Mr. John Bombardiere-Technologist

John Bombardiere received a Bachelor’s Degree in Animal Sciences from West Virginia University in 1996. Areas of study focused on

ruminant nutrition and commercial animal production systems, including manure and wastewater management. While serving as a

supervisor for contract growers for Perdue Farms in Delaware from 1996 to 1999, he was involved in nutrient management and

composting of poultry litter and mortality. John then operated a 10,000 gallon anaerobic digester pilot plant for West Virginia State

University from 2001 until 2006. Work included process control and feedstock verification experiments, several of which have been

published in peer reviewed journals. After 2006, John was a consultant for anaerobic digestion technology providers, working closely with

Dr Stafford. Work included feasibility study, design, and planning work for plants in the USA and Europe. He was also contracted to install

and commission aerobic trickling filters for digester effluents in West Virginia.

Mr. Doyle Kolle-Marketing

Doyle C. Kolle is a cum laude graduate in Ranch Management from Texas Christian University. After serving honourably for 6 years in the

military Mr. Kolle entered the self employed business world as a successful partner in commercial real estate development. Growing up in a

progressive farming and ranching operations provided a natural background for preparation to becoming a principle owner in start-up

business developments such as restaurants and aqua culture farming operations. Mr. Kolle has worked for a large International company in

marketing and product development. For the past 10 years he has been self employed as an environmental consultant in technology

analysis and project assessments. Mr. Kolle has also been a principal business partner in various energy related companies. His past

experience in product marketing together with hands on assessments of various leading edge technologies in renewable energies and bio

waste systems brings a broad based and valuable knowledge to the organization.

Mr. Herman Herpelinck -International Liaison

Herman Herpelinck is the caucus Secretary for nearly 30 years for the Liberal Party in Belgium in the National Senate and until recently was

also Chairman of the Flemish Land Agency. Being honorary chairman, he still serves as a board member. He also serves as a group

Secretary of the NATO Parliament for several years and has been in the lead of many international delegations to serve western democracy.

He is a governmental commissioner to the Belgian Agency of Foreign Trade, headed by the Royal Prince and again has been influential in

several international trade agreements between Belgium and Flanders and foreign governments. Mr. Herpelinck is the liaison member of

the Treat-Tec team to the Biomast group and has established the strategic alliance for the commercial development of the USA application

of the technology.

HarvestVillage Market

Hydroponic Business:

HarvestVillage Market (HVM) is a management entity for indoor vegetable farming systems potentially combined with unique intense aquaculture operations.

HVM proposes to build and operate containerized and or urban vertical farming operations for locally grown food sources in partnership with additional unique technologies that are proven economical producers of healthy nutritious vegetable greens and fish.

Potential for implemental operations include ‘school systems’ for the added school lunch menu items of locally grown nutritious, fresh safe greens, and healthy in-door cultured fish.

HVM will act as the manager for the separately owned food production operations established in co-partnership with its clients if requested.

HVM management will establish a division to oversee and be responsible for all product marketing, packaging and delivery from the Aquaponic type farming operations.

HarvestVillage Market licenses the expertise of industry leading companies that possess hydroponic and aquaponic technologies which produce proven economical superior quality naturally grown food products and include the production of:

Salad greens, vegetables, herbs and potentially the addition of indoor grown fish products. All of these products will be provided in ‘same day’ harvest to consumer.

HVM through long term relations in the fish-culture industry, licenses a high-yielding indoor fish farming technology for its use of various high-density aquaculture systems that are commercially proven. These economical and efficient systems will produce fresh fish and provide ‘same day’ whole or live fish deliveries several times a week to its customers.

HARVESTVILLAGE MARKETHARVESTVILLAGE MARKETHARVESTVILLAGE MARKETHARVESTVILLAGE MARKETEXECUTIVE SUMMARYEXECUTIVE SUMMARYEXECUTIVE SUMMARYEXECUTIVE SUMMARY

HVM’s concept for development of the Hydroponics and Aquaculture systems are symbiotic in nature and benefit each systems operation greatly in efficiency when combined into the same onsite operations.

HVM is responsible for the ‘feasibility study’ for recommendation and implementation of economical hydroponic and aquaponic systems for its clients.

HVM Concepts Advantages:

Deployment of commercially proven technologies

Technology companies provide all necessary equipment with on-going support

Fully automated systems with few employees needed to operate

Products may be targeted for sale to a high end customer base

Unapproachable freshness for the customer

Same day harvest and delivery to the customer

Greater nutritional values and flavor retention

Improved Food safety

Reduced transportation cost

Economical food production advantage

Ability to brand name products

HVM concepts are scalable and expandable to all major large urban areas

HarvestVillage Market technologies to be licensed

Hydroponic and Aquaculture Systems:

HarvestVillage Farms licenses production rights from various leading edge technologies known and assessed by them for their use in hydroponic and aquaculture systems and along with their added support programs.

HARVESTVILLAGE MARKETHARVESTVILLAGE MARKETHARVESTVILLAGE MARKETHARVESTVILLAGE MARKETHYDROPONICS & FISH AQUACULTUREHYDROPONICS & FISH AQUACULTUREHYDROPONICS & FISH AQUACULTUREHYDROPONICS & FISH AQUACULTURE

FARMING AT IT’S BESTFARMING AT IT’S BESTFARMING AT IT’S BESTFARMING AT IT’S BEST

HarvestVillage Market Ownership and Proposed Business Operations

HarvestVillage Market (HVM) as an Allied Green company is primarily a hydroponic/aquaponic management firm. Its managers are Roy Bowles and Doyle Kolle and who have the expertise and propose to build and manage their unique ‘models’ for indoor farming operations that efficiently produce hydroponically grown products along with the production of indoor cultured fish for local use or wholesale distribution.

HarvestVillage Market may offer to provide a “management contract” to its customers for long-term over-site of the hydroponic and aquaculture farming operations designed and built for its clients Worldwide.

HVM for this management service will receive a fee based on a per cent of the monthly sales values of produce from each of its managed farming operations. Fees will be paid quarterly.

HVM as “Farm Developer” for Allied Green’s customers will maintain over-site and final commissioning approval of all the hydroponic/aquaponic farming operations to be built for Allied Green’s clients.

HarvestVillage Market may at clients’ option act as an on-going Farm Manager of the aquaponics/hydroponics farming operations and in which will include a 10-year management contract. HVM will hire and oversee the selection of expertly trained personnel in the fields of hydroponics and aquaculture for employment to the farm production entity. All product growing, packaging and marketing will be the obligation of the farm operations contract manager.



There is the viable possibility to further the concept of urban farming by incorporating‘Aquaponics’ which is the combining of fish culture with hydroponics.

The fish waste system supplies the added nutrients for the growing of hydroponic typegreens/vegetables and the plants remove (filter) the toxins from the water for recycling backto the fish grow-out systems and create a true symbiotic eco system and a sustainable foodsource for the human population giving a greater balanced diet for human consumption.



38



Allied Green, LLC

EMBRACE THE FUTURE AND ALLOW US THE OPPORTUNITY TO BRING OUR LATEST PRODUCTS TO YOUR PROJECTS AS WE

CONTINUE TO RESEARCH AND COMMERCIALLY DEVELOP THE TECHNOLOGIES THAT WILL

IMPACT OUR ENVIRONMENT IN A POSITIVE WAY THROUGH DRAMATIC COST EFFECTIVE

ENERGY SAVING PRODUCTS.

“Better solutions for “Better solutions for those who wish to alter … · 2012. 5. 16. ·...

Documents

Transcript of “Better solutions for “Better solutions for those who wish to alter … · 2012. 5. 16. ·...