Anzors Foliage Systems

DIVIDER INSERT HERE: Foliage Systems

foliage systems

foliage system

s

127

BENEFITS• Strong, yet lightweight.• Durable.• 316 Stainless Steel components.• Easy installation - only hand tools required.• System can generally be configured to your

working space.

POSSIBLE APPLICATIONS

• Fences, feature walls, pillars.• Residential and commercial gardens.• Tilt-slab walls.• Growing a specific shape of pattern.• Bridge sidings (protection against graffiti).

MODERNISE A WALL OR FENCE BY GROWING FOLIAGE OVER A STAINLESS STEEL WIRE TRELLIS

This stainless steel wire system provides a flexible and permanent trellis that makes featureless walls and fences come to life.

FOLIAGE SYSTEM OVERVIEW

NOT RECOMMENDED FOR SITuATIONS WHERE THERE IS A RISk TO THE WATERTIGHTNESS OF A BuILDING. E.g. PLASTER AND TIMBER CLADDING.

Online catalogue: www.anzor.co.nz/foliage-systems

128Online catalogue: www.anzor.co.nz/arch

FOLIAGE SYSTEM COMPONENTS

WIRE TYPE: STRAIGHT when running wire in a straight line with no bends.

use 3mm 1x19 316 rigid wire (see p.105)

GR1025 GR1025 GR1025 GR1025

GR1025

GR1025 GR1025GR1025

GR1025 +GR1051

GR1025 +GR1052

GR1025 +GR1052

GR1025 +GR1052

GR1025 +GR1052

GR1025 +GR1052

GR1025 +GR1052

GR1025 +GR1051

GR1025 +GR1051

GR1025 +GR1051

The example above shows a possbile scenerio measuring approx. 2.0m high x 2.5m wide. Recommended distance between the eyes is 500mm

Using a diagonal trellis construction, Anzor’s foliage system supports vines, climbers, and scrambling plants.

5

For a list of items and stock codes

See page 119

1 2

4

1

2

3 4

FOLIAGE SYSTEM COMPONENTS

WIRE TYPE: LATTICE FORMATION For the wire to be strung in a lattice formation as shown above.

use 3mm 7x19 316 flexible wire(see p.105)

GR1025 +GR1051

GR1025 + GR1052

GR1044

NOT RECOMMENDED FOR SITuATIONS WHERE THERE IS A RISk TO THE WATERTIGHTNESS OF A BuILDING. E.g. PLASTER AND TIMBER CLADDING.

GR1044

GR1046GR1044

GR1046

GR1025

53

For a list of items and stock codes

See page 126

GR1046



Wire End Termination

Garden Eye for solid wall - M8x25mm316SS (GR1025)

Thread length - 25mmSpacing from wall - 100mmThread size - 8mm

Dead End with grub screw 316SS (GR1051)

Loosen screws and thread wire in.

Drop-In Anchor - M8316SS (DYDIM608 - see p.143)

Setting tool required for proper installation.NB. Setting Tool Sold Separately.

Garden Eye and Adjuster

Eye Bolt for solid wall - M8x25mm316SS (GR1025)


Adjuster units 316SS (GR1052)

Gives 15mm of tensioning capability.



Middle supports (where required).

Cross Clamp - M4316SS (GR1044)

Use for increased stability, if wire span is up to, but not greater than 2100mm and/or heavy plants will be attached.

Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.

Middle supports with stud (where required).

Cross Clamp - M8 x 25mm316SS (GR1046)

(see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.



Perimeter Supports

Garden Eye for solid wall - M8x25mm316SS (GR1025)




SOLID WALL APPLICATIONSEX-STOCk SuBJECT TO PRIOR

SALE

1

2

3

4

5

NOT RECOMMENDED FOR SITuATIONS WHERE THERE IS A RISk TO THE WATERTIGHTNESS OF A BuILDING. E.g. PLASTER AND TIMBER cLADDING.

FOLIAGE SYSTEM - SOLID WALL


EX-STOCk SuBJECT TO PRIOR

SALE


Wire End Termination

Garden Eye for timber316SS (GR1027)


Dead End with grub screw 316SS (GR1051)

Loosen screws and thread wire in

Garden Eye and Adjuster

Garden Eye for timber316SS (GR1027)


Adjuster units 316SS (GR1052)

Gives 15mm of tensioning capability.

Internal Supports (where required)

Cross Clamp - M4316SS (GR1044)

Use for increased stability, if wire span is up to, but not greater than 2100mm and/or heavy plants will be attached.

Remove grub screw and insert wires and replace grub screw to secure. Use Loctite for permanent fixing.

Internal Supports (where required)

Cross Clamp - M8 x 25mm316SS (GR1046)

(see above) Use if wire span is greater than 2100mm, then install half way along the length of where the wires cross over.

External Supports

Eye Bolt for timber316SS (GR1027)


TIMBER APPLICATIONS

1

2

3

4

5

Used to tighten the collar of the garden eyes, which then works as a lock-nut to keep the eyes in the right position and prevent tampering with the system.

Spanner sold separatelyProduct code: FOLGR1053

GR1053 Foliage Spanner

N.B: NOT RECOMMENDED FOR TIMBER CLADDING DuE TO ISSuES WITH WATER TIGHTNESS.

FOLIAGE SYSTEM - TIMBER


EX-STOCk SuBJECT TO PRIOR

SALE


1. Before you start to install the system, we recommend you attach small nails where the eyes will be installed, and run strings between them to make sure you are happy with the pattern (you could base your pattern on that shown on p.128).

2. When you are satisfied with the pattern, drill the holes and install the eyes.

3. Thread the wires through the eyes in the same way as you did with the strings, to create the trellis system.

4. Attach the end fittings.

5. When you install the second wire, try to weave the wire into the first one by alternating between going over and under the first wire. This will minimise need for cross clamps.

6. When both wires are installed, tension the wires at the adjuster units.

7. If using wire cross over clamps install these last, after tensioning the system.

NB: The cross clamps stabalise the system at the crossings of the wires.This is needed if the wall span is more than 2 metres and/or the plants are heavy.

INSTALLATION GuIDE

ALTERNATIVE FOLIAGE OPTIONSHORIzONTAL WIRE RuNS

FOLIAGE SYSTEM INSTALLATION

TOOL HIRE - Anzor has hex swaging tools and crimping tools available to hire - contact your local branch.

M6 Drop-In Anchors.316 SS(DYDIM606)

S3191P 316SS Mini M5 Jaw/Swage Pipe Turnbuckle.(MFTBPJSMM605)

S3191 M6 x 60 304SS Eyebolts.(MFEBM406060)

3.0mm 7x19316SS Flexible Wire.

(MFW030719)

Not recommended for situations where there is a risk to the watertightness of a building. E.g. Plaster and timber cladding.

M3 Nickle Plated copper Wire crimp.

(MFWcM03N)Wire looped through eye + crimped.Not recommended for high loading.

For wire length of no more than 3m, otherwise use S3121P-06.



Vertical runs on columns - pictured on page 121

ALTERNATIVE FOLIAGE SYSTEM OPTIONS

ASS Wall Bracket - helps reduce the load and prevent the garden eyes bending. See p.123 for full ASS Wall Bracket details.

ALTERNATIVE FOLIAGE OPTIONS

Vertical Run On Columns - up to 3.0m.

Possible Issue with Vertical Run On Columns over 3.0m

Garden eyes bend inwards when adjuster units over tightened.

ForceForce

Solution: Vertical Run On Columns over 3.0m.

GR1025 Garden Eye.

1x19 3mm Wire Rope

S7801 - 3mm x M6 Swage Stud

GR1052Adjuster Unit

M8 Drop-in Anchor

GR1052Adjuster Unit

GR1025 Garden Eye.

M8 Drop-in Anchor

Anzor ASS Wall Bracket

Anzor ASS Wall Bracket(see next page)

S3127P Pipe Turnbuckle plus swage stud - (MFTBPFFM606)



• Slim and unobtrusive design.

• can fit up to 5mm Eye Terminal.

• Attach Eye Terminal at the top and S3121P

Jaw Swape Pipe Turnbuckle at the bottom.

• Made from 304 Stainless Steel.

• Product code: AWBY.

Anzor ASS Wall Bracket - Y TypeASS Wall Bracket(product code: AWBY)

Securing Screw + Nut (included with bracket)

S7802F Eye TerminalWire size 3.0mm(MFSWET603)

M12 Bolt & NutM12 Drop-in Anchor(Sold separately)

ASS Wall Bracket - dimensions

LOOkING FOR FASTENERS? See our complete range of fasteners at the back of this catalogue p.138

We recommend applying Loctite 243 after installation for permanent fixture.

LOCTITE

ANzOR ASS WALL BRACkET

S3127P Pipe Turnbuckle plus S7801 RH Swage Stud - End Termination (MFTBPFFM606)

Depending on the length of wire and potential load, two turnbuckles may be required for tensioning.


Sized1

(mm)d2

(mm)d5

(mm)b

s (mm)

70 x 13 13 70 30 M6 8.5


EX-STOCk

SuBJECT

TO PRIOR

SALE



WALL BRACkET - for connection with jaws

VERTICAL RuNS ON COLuMNS

NOT RECOMMENDED FOR SITuATIONS WHERE THERE IS A RISk TO THE WATER TIGHTNESS OF A BuILDING.

E.g. PLASTER AND TIMBER cLADDING.


125mm

160mm

30mm

Ø9mm

Jaw/Swage Pipe Turnbuckle (S3121P) M6 / 3.0mm - 316SS (MFTBPJSM606)

Wire Rope3.0mm 1x19 316 Stainless Steel wire(MFW030119)

Swage Fork Terminal (S7803) 3mm - 316SS(MFSWFT403)

Eye Bolt (S3191) M8 x 130 - 304SS(MFEBM408130)

Wall Bracket with Jaws304SS (AWBJ)

Spacing from wall - 125mmHole size - 9.5mm

Hex SetscrewM8x30 - 316SS(BHM408030S)

Drop-In AnchorsM8 - 316SS(DYDIM608)

Drop-in Anchor Setting Tool Required.


EX-STOCk

SuBJECT

TO PRIOR

SALE

Anzors Foliage Systems

Documents

Transcript of Anzors Foliage Systems