CHRISTMAS RING“ANTIQUE GLAMOUR”

Product Group Article No.Article Amount Size Color Color Code

SWAROVSKI ELEMENTS

Round Stones 1201 1 pc. 35 mm 280 HEMJet Hematite F

Crystal Pearls 5810 22 pcs. 3 mm 001 600Crystal Petrol Pearl

Leather, 6x6cm

Nylon thread, transparent, 0.35mm, 1m

2 Spools stretchy sewing silk

Crocheting needle

Double sided tape

Scissors

Sewing needle

Tape

Tools

Supplies

Supplies & Tools

Sewing

Crocheting

5 cm

STEP 1: Draw a 5cm diameter circle. Stick double sided tape on the back.

STEP 2: Place the pattern on top of a piece of leather and cut out the circle.

STEP 4: Pull the nylon threads to get the shape as shown in the illustration. Remove the tape and add the SWAROVSKI ELEMENTS Round Stone article 1201, 35mm Jet Hematite to the center of the beaded leather circle. Tie a double knot with both thread ends. Stitch one of the thread ends out to the back side from the center of the leather as depicted below.

STEP 3: Cut 1m of 0.35mm nylon thread. Stitch from the back of the leather circle to the front about 3mm in from the edge. Begin adding 3mm SWAROVSKI ELEMENTS Crystal Petrol Pearls, article 5810 as shown as you continue to stitch around the leather circle.

0.35 mm 1 m

3mm

Repeat

Repeat

STEP 5: Use two spools of machine stretchy sewing silk, make a slip knot and place it on a crochet hook. Place yarn over hook and slide through the loop on the hook. Repeat until you have made six stitches.

STEP 6: Crochet back along these first six stitches and repeat until the length of the crocheted yarn is the length of your “ring size”.

STEP 7: Sew the ends together to form a tube-like structure. Attach to the center of the leather circle with the nylon thread that was stitched out the back side in step 4 as shown in the illustrations.

x4

Repeat

Shown complete