Antenna and Cable Accessory Guide

RC Systems has engineered and manufactured industrial electronic products for the instrumentation industry since 1979. As critical alarm monitoring experts, we specialize in interfacing various sensors and analyzer devices to our alarm and display products. Our products are known for their reliability, performance, and ease of use for applications where maintenance and safety are crucial. Some of these applications include fixed and temporary ambient gas detection as well as numerous other multi signal monitoring applications. In addition, we provide various solutions for hard wire or wireless systems. Our wireless monitoring ability/strategy continues to provide recognized solutions for countless customers worldwide.

1000-2189 900MHz straight antenna; supplied with 10-0288 and 10-0326 packaged radios (omni dipole,2dBi). 1000-2300 2.4GHz straight antenna; requires 10-0295 3/4” NPT Antenna Fitting when ordered for ST- 48RF and ST-95 XP enclosures (omni collinear, 7dBi).

1000-2199 The Lightning Arrestor is recommended for all outdoor base station antennas.

Straight Rubber Antenna 900MHz and 2.4GHz Lightning Arrestor

1000-2309 2.4GHz Yagi 45 degree directional, 12dBi. For installations where a “Rubber Duck” dipole is inadequate. Supplied with 1 foot N-Female pigtail and tilt and swivel pipe mounting bracket to allow aiming towards the base station antenna.

Yagi Antenna 2.4GHz 1000-2310 900MHz Yagi 45 degree directional, 12dBi. For installations where a “Rubber Duck” dipole is inadequate. Supplied with 1 foot N-Female pigtail and tilt and swivel pipe mounting bracket to allow aiming towards the base station antenna.

Straight Rubber Antenna 900MHz

8621 Highway 6, Hitchcock, TX 77563

Tel: (409) 986-9800 Fax: (409) 986-9880www.rcsystemsco.com

10-0289 Antenna base station 900MHz ,collinear.

10-0203 Sensor head and calibration adapter for ATEX applications.

1000-2638 Quick connector; Generation 2 male 3/4” NPT for XP sensor J-box end; Division 2.1000-2641 Quick connector; Generation 2 female 3/4” NPT for XP sensor J-box end; Division 2.

1000-2494 75’ Long RP-TNC low loss coax antenna cable.

1000-2482 50’ Long RP-TNC low loss coax antenna cable.

1000-2483 25’ Long RP-TNC low loss coax antenna cable.

1000-2484 15’ Long RP-TNC low loss coax antenna cable.

Sensor Head for Atex Applications

Quick Connectors

Quick Connectors

Antenna Base Station 2.4GHz1000-2310 Antenna base station 2.4GHz ,collinear 6dbi.

Antenna Base Station 900MHz

Sensor Head 10-0247 Sensor head shown with calibration cup and splash guard.

RP-TNC Low Coax Antenna Cable

Lock Fast Cable Guard1000-2644 Lockfast cable guard; Division 2, Generation 2 (two supplied per cable set).

1000-2635 Quick connector; panel mount for controller end; Division 2, Generation 2.