Ansys question paper
-
Upload
pramod-gowda -
Category
Documents
-
view
26 -
download
3
description
Transcript of Ansys question paper
Amrita Vishwa Vidyapeetham Amrita School Of Engineering, Bangalore
DEPARTMENT OF MECHANICAL ENGINEERING
ANSYS – LAB EXAM 2012 Semester : VII Duration: 120 min
Date : 03/12/2012 Max. Marks: 20
1) For the beam with loadings shown in the figure , select the best design
with least displacement among the given cross sections for the given
loading. Consider E=205 Gpa.
40KN/m
20KN/m
5KN-m
20KN
20KN/m 20KN/m
2) Among the three sections shown in the above figure, for the one which
has the highest displacement carry out 3D modal analysis-Cantilever
beam condition, extracting 10 modes. Length = 350mm. Consider
=7800 kg/m3.
NAME : REG.NO:
B4
3) For the given bracket shown in the figure below, consider E=200 GPa,
=0.3, 1 inch =25.4mm. Left end of the bracket completely constrained
and pressure is applied only on right side of the hole shown in the figure
below. P = 3KN/m2. Determine the following.