ansr
1
Snamprogetti SAFETY TRAINING DEPARTMENT ABRASIVE WHEEL MACHINERY TRAINING ANSWER SHEET Students Name: Date: Time: Company: Employee #: Evaluator: Evaluator Phone Number: Results: Pass q Fail q Number Failed: Supervisor Notified of Results: Yes q No q TEST QUESTIONS TRUE FALSE 1 Proficiency in machine use must be established þ q 2 Employers must explain machine inspection requirements þ q 3 The “General Duty Clause” exempts some employers from having a safety program q þ 4 Employees can be penalized for not reporting known hazards þ q 5 I can receive mandatory retraining if my employer doubts my proficiency þ q 6 Employers must explain the types of personal protective equipment required þ q 7 The operation, capabilities, and limitations of machines must be covered during training þ q 8 Supervisor must be involved with hazard assessments for machines þ q 9 Machines must be carefully matched to the specific job þ q 10 Conversation should be limited to a minimum during machine usage þ q 11 Machines should be maintained in accordance with the manufacturers guidelines þ q 12 Machines must be inspected before each use by your supervisor q þ 13 Defective machines must be removed from service immediately þ q 14 Modified machines must be approved and the modification documented þ q 15 A detailed tool inspection policy should be implemented þ q 16 The person most able to affect your safety at work is you þ q
-
Upload
owaishazara -
Category
Documents
-
view
6 -
download
1
description
computer
Transcript of ansr
ABRASIVE WHEEL MACHINERY TRAINING ANSWER SHEET
Snamprogetti SAFETY TRAINING DEPARTMENTABRASIVE WHEEL MACHINERY TRAINING ANSWER SHEET
Students Name:Date:Time:
Company:Employee #:
Evaluator:Evaluator Phone Number:
Results: Pass Fail Number Failed:Supervisor Notified of Results: Yes No
TEST QUESTIONSTRUE FALSE
1Proficiency in machine use must be established
2Employers must explain machine inspection requirements
3The General Duty Clause exempts some employers from having a safety program
4Employees can be penalized for not reporting known hazards
5I can receive mandatory retraining if my employer doubts my proficiency
6Employers must explain the types of personal protective equipment required
7The operation, capabilities, and limitations of machines must be covered during training
8Supervisor must be involved with hazard assessments for machines
9Machines must be carefully matched to the specific job
10Conversation should be limited to a minimum during machine usage
11Machines should be maintained in accordance with the manufacturers guidelines
12Machines must be inspected before each use by your supervisor
13Defective machines must be removed from service immediately
14Modified machines must be approved and the modification documented
15A detailed tool inspection policy should be implemented
16The person most able to affect your safety at work is you
