1

Welcome to use our product.

Dear Sir/Madam,

Thank you for purchasing our product. Before using, please carefully readthrough the product manual and properly keep it for future reference.

For your safety, please do not watch videos and operating system during driving.Please adjust volume properly in driving for clearly hearing sound from externalenvironment.

2

CONTENTⅠ. Preface………………………………………………...............................1Ⅱ. Precautions…..………………………..............................……………...4Ⅲ. Product characteristics…………………..............................…………..5Ⅳ. Basic operation…………………………..............................….………..64.01. Power On/Off and volume adjustment….........................………….......64.02. MENU (Main menu).............................................................................. .64.03. RADIO (Radio mode).............................................................................74.04. TONE (EQ setup).................................................................................. ..74.05. DIMM screen brightness adjustment..................................................... ..74.06. NAVI (Navigation mode)....................................................................... ..74.07. DISC (Disc mode)…................................................................................74.08. MEDIA (Multimedia mode).....................................................................84.09. PHONE Bluetooth call..............................................................................94.10. Panel right knob........................................................................................94.11. SD card holder...........................................................................................94.12. USB slot..................................................................................................104.13. TC function.............................................................................................104.14. Screen calibration....................................................................................10Ⅴ. Setup………….……………….…………....................................……….115.1. Radio setup.................................................................................................115.2. Display setup..............................................................................................115.3. Car model setup..........................................................................................115.4. System setup...............................................................................................125.5. Telephone setup...........................................................................................125.6. Video setup..................................................................................................135.7. Tone setup....................................................................................................135.8 Universal setup.............................................................................................13Ⅵ. Function operation ………….…………………................................…...156.1. Radio function operation.............................................................................156.2. Navigation function operation.....................................................................176.3. Disc function operation...............................................................................186.4. Media function operation............................................................................196.5. Bluetooth function operation.......................................................................206.6. Can-bus function operation..........................................................................236.62. “P” key OPS function................................................................................236.63. Power-off rearview function......................................................................246.64. Air conditioning display function..............................................................246.65. Door open warning....................................................................................256.66. Steering wheel control function.................................................................256.67. Instrument panel display function.............................................................26

3

Ⅶ. Troubleshooting …………………….…….......................…….………27Ⅷ . Technical parameters ...……….………….......................…….……....29

4

Ⅱ. Precautions■Precaution: Professionals are required for product installation and maintenance.※ Before operating, please carefully read instructions in this manual and othersupporting manuals.

※Unauthorized installation and maintenance may cause other dangers andpossible damage against the system causing warranty invalid.

※When plugging, please hold the proper position of the connector but not pullthe lines with heavy force to avoid fail of connection.

※ Keep yourself safe while driving.※In case of trouble during using this system, please park your car at a safe placefor a solution.

※Keep children away from the system to avoid damage caused.※While using satellite navigation system, please obey traffic rules to drive yourcar.

※Unauthorized maintenance, servicing and installation are prohibited. Do notinstall or maintain this system with power-on.

※Trained or experienced persons are required to maintain the system.※Do not scratch display with a sharp article and do not press the display with aheavy article to avoid damage.

※When turning off the engine, please do not use the system for long to preventdead battery caused..

※ Only one 12cm disc can be played synchronously. Do not insert 8cm disc orother article into the system.

※ Keep disc entrance clean. In case of dust found, please immediately performcleaning. Dirty disc cannot be placed in until being cleaned. Otherwise, dustwill affect playing effect of the system when entering and cause a slow disc inor out, fail to read the disc. In case of these problems, professionals arerequired to clean it.

※Long-term playing with high volume will shorten lifespan of the system. Forprotection, please do not use the system for long-term and keep it at lowvolume.

※The system comprises of high precision parts. Unauthorized disassembly oradjustment of any parts in the system is prohibited.

※Operating voltage of the system is 12V and it is a must install it in a car withbattery system of negative pole grounding to avoid fatal damage caused to it.

※In case of abnormality found, please firstly refer to “Troubleshooting” in thismanual.

※Radio signals are easily interfered by various kinds of electromagnetic waves.Fissle heard from it is normal.

※ Please peel off screen protective film before using the system.※In case of trouble for installation, please contact distributors or authorizedservice center.

5

Ⅲ. Product CharacteristicsCan-Bus: Support original can bus system, realize original car perfect

compatibility;Support three-screen overlap display function for OPS, IPAS and reverse video.After completing of reversing, it automatically returns to pure OPS interface.When driving speed is at 15KM/H, it will automatically return to play interface;

Support car door state warning function: It will display car door warninginformation when car doors, engine hood or trunk are open. When car dooropens or closes, cover of trunk or engine hood opens, the navigation system willshow that they opens (Original CAN-BUS support is needed.);

Support steering wheel control function: volume increase and decrease, mute,next and previous song, answering calls and hang-up, switchover to play mode(Original car CAN-BUS support is needed.);

Support original car air conditioning information dual zone display function, itcan show temperature external and internal of the car (Original car CAN-BUSsupport is needed.);

Built-in radio FM, AM function;

Built-in Bluetooth hand free function: Support phonebook download, Bluetoothmusic play, dialing and receiving call. And it can display caller’s ID (name andphone number) (Original car CAN-BUS support is needed.);

Built-in DVD function compatible with CD-DA, CD-ROM, CD-RW, VCD, andDVD-ROM;

Support IPHONE4 music play and battery charging function (Optional);Support original car USB plug-in function (Optional);

Built-in IPAS, support IPAS function. (Original car CAN-BUS support isneeded.);

Support HD-SD car multimedia play function, touch screen play function,support MP3/ MP4/ WMA /JPG;

4X60W super strong hi-fi power amplifier system, support original car Dynaudiopower amplifier system;Built-in GPS navigation with accurate navigation and positioning capabilitybenefiting you a travel free of puzzlement.

6

Ⅳ. Basic operation and key functions

4.01 Power On/Off and volume adjustmentIn power-off state, short press left knob or any key on the panel to powerthe machine on; in power-off state, press and hold the left knob to powerthe machine off. Volume adjustment: Turn the left knob clockwise andcounterclockwise to increase or decrease volume. When turningcounterclockwise to 0 position, screen shows mute; when turning it againclockwise to cancel mute; short press the left knob to achieve mute, andpress it again to cancel mute.

1. MENU (Main menu)1. In other functional mode, short press MENU key to return to main menu(Figure 1). In main menu interface, click corresponding functional key toenter function of it. Wherein, plug-in or connection to related equipmentis required for entering disc, SD, USB, IPOD or external output. TVmodule is required for TV function performed.

2. MENU key is also with shortcut function. Press and hold MENU key onthe panel for 3 seconds to display screen calibration interface. (In case ofdeviation of touch screen, this operation is needed.)

7

Figure 12. RADIO (Radio mode)

Press RADIO key on the panel to switch over to radio mode. In case ofpressing RADIO again, it will switch over among FM1, FM2, FM3, AM1and AM2.

3. TONE (EQ setup) set desired tone of yourself. (Refer to 5.8 universal setupfor details.)

4. DIMM (Screen brightness adjustment)Press DIMM key on the panel for three levels: bright, soft and off. Whenyou turn on the headlight, screen brightness will automatically adjust tosoft light, so that can protect the driver’s eyes (this is because headlight isturned on only at night). When the headlight is turned off, the screen willautomatically change to the brightest mode. You can turn off the screen toenjoy music via DIMM button.

5. NAVI (Navigation mode)Short press NAVI key on the panel, it will enter navigation mode. (If thesystem is plugged in a navigation map and route is set ready, this operationis valid. Otherwise, “SD card unavailable” will be shown.) If to press itagain, it will switch over to the current radio mode. For example, if myforeground is radio interface and background is navigation interface, whenradio is needed, it is press NAVI again to switch over to radio interface.Navigation voice switching key: Short press navigation voice switch atright top corner of the panel, or press and hold NAVI key to turn on or offseparate navigation voice.

6. DISC (Disc mode)When playing disc, click middle part on left side of the screen for theprevious song, and the middle part on the right of the screen for the nextsong. When clicking central part of the screen, DVD menu will bedisplayed: play, stop, fast forward, backward, previous and next.

8

when there is a CD in the machine, short press DVD key on the panel itwill directly switch over to disc play mode. If there is no disc available inthe machine, this operation will be invalid.

Forward and backward key:：Short press the two direction keys on the top left corner; it will switch to nextsong or backward song.

：When press tray out key it will eject the disc auto.

7. MEDIA CD, SD, MP3, iPhone (Multimedia mode)If to short press MEDIA key on the panel, the system will switch to mediamode. If the system is already in media mode, five tabs cannot be selecteduntil related equipment is inserted or connected to the machine. If themachine is not plugged in or connected to the related equipment, the tabsare invalid. At the moment, operation will be fail. Text of option carddisplayed in red or green means that related equipment already connectedand in a state of reading.

Preview: Rapidly browse songs in SD card. After playing each song for fiveseconds, it will automatically browse the next song. In case of desiredsong found, it is to press Play key for playing.

Random: Play of the songs with no regular sequence.Repeat: Repeat to play the selected song.Folder: Click to enter song list interface.

9

This navigation supports iPod, iPhone made by Apple Inc. (Data wires areoptional). When iPhone is plugged in, it will automatically play iPhone songsand charge battery for iphone.

8. PHONE Bluetooth callWhen short press PHONE on the panel, the system will enter Bluetooth calloperating interface (As shown in the figure below). Press other key to exitfrom Bluetooth call and execute other functions (Refer to 6.5 for moredetails.)

9. Screen touching and display area10. Bluetooth microphone:Making or receiving calls by Bluetooth.11, 12. Previous and next song control during playing, search radio stations in

radio mode.13. Entrance and exit for disc14. Eject key

Use it for changing disc during playing.15. Navigation voice On/Off key

When enjoying music or performing navigation, press this key for turn-onor turn-off navigation voice. After turn off navigation voice, it will onlyplay music voice. Press it again to turn navigation voice on.

16. Left knobIn power-off state, press it once to power it on, and press it once duringplaying sound for mute. Press and hold for three seconds to power it off.

17. Right knobIn radio mode, it is used for searching radio frequency; in Play mode, pressit to pause, and press it again to play.

10

18. Reset holeIf product is out of order, plug a small and thin article into this hole forrestore factory setting.

19. Left memory card portNavigation port

20. Right memory card portPlay memory card with music or video

Insert improper SD card will cause failing4.12. USB, iPod cable (Optional)When selecting and installing special USB patch cord, direct connection tooriginal car USB patch cord can be performed, and it can also be connected withUSB connecting cable on accessories. Only when connecting USB equipmentwith USB slot can documents in USB equipment be read.

When selecting and installing iPod cable, you may play music and performcharging when contacting with iPhone.

4.13. TV function (Optional)When the system is equipped with digital TV module, press and holdMEDIA key to enter digital TV watching mode.

4.14. Screen calibrationDuring using, in case of screen deviation occurred, touch screen calibrationis needed. Long press MENU key to enter touch screen calibration modefor calibration (Refer to 5.8 universal setup for more details.)

11

Ⅴ. Setup

5.1. Radio setupEnter main menu, click “Setup” and then click “Radio” to enter radio setup.In China, please set reception area to “China”, and set RDS to “Off”.

5.2. Display setupEnter main menu, click “Setup” and then click “Display” to enter displaysetup. In display set up mode, you can set screen brightness and indicatorcolor of keys. Users can set up according to his own need.

5.3. Car model setupEnter main menu, click “Setup” and then click “Car model” to enter carmodel graphic setup. Users can select car type according to his own carmodel or similar model. Slide the screen leftwards to find more car == typefor selection. After making selection, in OPS and RVS mode, it will display

12

the car type you selected.

5.4. System setupEnter main menu, click “Setup” and then click “System” to enter systemsetup. It including language set up; automatic startup navigation system setup: after startup, it will automatically enter navigation interface when turnon the machine. In turn-off state, it is needed to press NAVI to enternavigation interface; switchover between left and right main driving cardoors: select left or right car door is according to your car; navigationdefault volume set up: select various levels of navigation volume; TVsystem set up: user select different TV format according to local signal; fiveitems: user can set up according to his own need.

5.5. Telephone setupEnter main menu, click “Setup” and then click “Telephone” to enter

13

telephone setup. It including of phone set up, automatic connection set upand automatic answering set up. User can set up according to his own need.When telephone is in turn-off state, Bluetooth phone function can not beused, and automatic connection and automatic answering functions areinvalid. If you want to use telephone buletooth function, phone set up areamust select “On”. When automatic connect function is in Open state, all themobile phones existed in record in pair ID be automatically connected aslong as it’s in the scope of Bluetooth signal. When automatic connectionfunction is in off state, manual connection is needed. After pairsuccessfully .When there is a incoming call, if automatic answering is set to“On”, it will directly answer the call without pressing answering key onsteering wheel or on touch screen. If automatic answering function is in“Off” state, when there is an incoming call, you have to press answeringkey on wheel or system to answer it.

5.6. Video setupOn main menu, click “Setup” and then click “Video” to enter video setup.This selection is for video watching mode, it including two options“Fill-up” and “Original size”. When “Fill-up” is selected, video image willbe played on the full screen, and when “Original seize” is selected, videoimage will played in the original size. User can set up according his to ownneed.

5.7. Tone setupOn main menu, click “Setup” and then click “Tone” to enter tone setup. Itincludes high, middle and bass frequency for adjustment, as well as Q valueparameters of bass and middle sound. User can set up according to his ownneed for ideal audio and video effect.

5.8. Universal setupOn main menu, click “Setup” and then click “Universal” to enter universal

14

setup. It includes “Touch screen calibration”, “Recover to default setup”,“Navigation route setup” and “Tone” setup.1) Click “Touch screen calibration” and select “yes” to enter touch screencalibration procedure. Following hint on the screen, click center point ofeach cross until completion of touch screen calibration.

2) If to click “Recover default set up” and select “yes”, the system willrecover all settings to the default set up.

3) Click “Navigation route setup” to enter navigation route setup. At thistime, SD card with map file should be inserted into navigation slot.Otherwise, the operation is invalid. Select corresponding folder and filesin gps card. When making selection of the file, and then click “√” tofinish navigation route setup. Note: If there are many files in thenavigation card, and the current screen fails to display the file whichneeds to be selected, you can touch to scroll the screen, and then thedesired file will be displayed at the bottom.

4) After clicking “Tone” to enter tone setup, there are four prebuilt tonemodes for option. It including Classics, Rock, Jazz, Popular. Users canalso select “Self-defined”, and to touch and move value bars for “Bass”,“Super bass”, “Alto” and “Treble” to adjust each item to the desiredposition. Loudness switch: adjust loudness to “On” and “Off”, vibrationof sound will be quite different. User can set up according to hisfavourites. Click , short pressing TONE again or no operation for 6seconds it will automatically log down mode.

15

Ⅵ. Function operating6.1. Radio function operating

Enter radio modeIn general, after start-up, the system will automatically enter radio mode. Whenthe system is in DISC, MEDIA or PHONE mode, when short press RADUO keyon the panel, it will enter RADIO mode. When the system runs radio andnavigation at same time, and with display navigation image, users only after shortpress NAVI key on the panel, then it will return to radio interface. When thesystem is in radio mode with display the interface of MENU, users only shortpress “RADIO” or click “Radio” key on the screen, then it will return to the radiointerface.

Waveband switchoverIn radio mode, after clicking “Waveband” key it will appear “FM, AM” key onthe screen, if to select “AM”, it will switch over to AM waveband. Or, directlyand repeatedly press “RADIO” key on the panel the waveband will switchoveramong FM1, FM2, FM3 and AM.

16

AS (Automatic searching and storage)This system can store 18 FM radio stations and 6 AM radio stations. Click

to automatically search local radio stations upwards anddownwards.

Adjust waveband to FM1 and click “AS” key on the screen it will automaticallysearch and store maximum 6 local radio stations in FM1.

RDS Radio station

Enter RDS set up and select the region according to user’s area.

Radio station searchingIn radio mode, click “Search”, it will search radio station in current waveband.When a radio station is searched, it will provide audition for 10 seconds and thenkeep searching other stations and auditioning.

Manual station searchingIn radio mode, click “Manual” key on the screen, it will display frequency rulers.When press left and right direction keys of the rulers manually, or roll the rightknob on the panel, radio frequency will change to realize search station manually.

17

Manual radio station storageAdjust radio waveband to FM1 and select radio station storage position(PO1-PO6), and then adjust the frequency which you want, and then long press atthe position where you want to store for three seconds. And then, it will save it.Totally 24 radio stations can be stored in FM1, FM2, FM3 and AM.

Select radio station from the stored stationsAdjust radio to the desired waveband. And then, it will display already storedradio stations in that waveband Click one of the storage key then cam directlylisten to this radio station.

6. Back: Click it to return to the main interface and for other operations.6.2 Navigation function operationClick “NAVI” on the main menu or short press “NAVI” key on the panel to enternavigation mode .Note: This is valid only when the navigation card is alreadyinserted into navigation slot and navigation route already set up. Otherwise, “SDcard unavailable” will be shown.

Operating methods verify due to different navigation software. No more detailsare given here.

Navigation function can be run synchronously with other functions (RADIO,DISC, MEDIA, PHONE, etc.). When navigation voice is opened, voice of otherfunctions will get lower. If navigation is without voice, voice of other functions isnormal.

Users can close navigation voice, just display the interface of navigation.(Refer to 4.06NAVI mode for more details)

18

6.3. Disc function operation

Insert a disc with printed side upwards. If there is no other disc available in theplayer, the system will automatically pull the disc in.

After reading disc for a certain time, it will automatically start playing movie.The system have disc memory function， such as, if the disc is the one playedpreviously, the system will auto start play from the point previously played

Short press touch screen keys or right knob on the panel to start playing themovie

Pause/PlayIn play mode, short press the right knob on the panel for pause/play. Repeatedlypressing the right knob will return to play.

Previous/NextShort press the two keys of “Previous” and “Next” at top left keys which next todisc entrance as shown in the figure. The two keys can achieve skip betweenprevious and next song on the disc. Or, gently press middle part of left edge onthe screen for skip to the previous song, and gently press middle part of right sideon the screen for skip to the next song.

Play listIn play mode, gently press middle part of the screen to pop up play list. Usersmay click for operation according to personal need.

—Play/Pause; —Stop; —Previous;

—Next; —Fast reverse; —Fast forward;

19

—Magnification; —Repeat; Audio—Sound track;

—Page-down; —Page-up; A-B—Image repeat; Root—Backto the previous;

6.4. Media function operationMedia basic operationIn mode of radio, DISC video and PHONE, short press MEDIA key on the panelto enter Media mode. Press other functional keys like radio, DISC (during video)and PHONE to exit from Media function and perform other functions.

Function selection in mode of MediaIn media mode, there are couples of sound sources including disc, SD, USB,IPOD and external input available for option. Only when the device is inserted orconnected with different sound sources, it is valid to click corresponding functionon the screen. The system will perform auto detest and take the priority to playthe latest inserted equipment.

Play controlWhen source equipment inserted, the system will perform auto detest and playcontents in the equipment. Click “Pause” key on the screen to pause playing.Repeated click this key is to go on playing. If to click “Previous” or “Next” keyon the screen, or short press “Previous” or “Next” key at left side of the discentrance, skip to the previous and next can be achieved.

Program list previewDuring playing the current sound source, click “Preview” key on the screen to

20

preview program list in the present equipment for ten seconds.Random playClick “Random” on the screen to random play the programs in the presentequipment. Repeated clicking “Random” key will be back to mode of playing insequence.

Repeat modeRepeatedly click “Repeat” key on the screen is to set up repeat mode of theprograms in the equipment being played. There are three kinds of repeat: repeatone, repeat all and repeat off.

File browsing playClick “Folder” key on the screen to browse files in the present equipment. Byclicking Up and Down key at right side of the screen, it is to scroll files on thefold for browsing. When the program found during browsing, click title of theprogram on the screen to start playing it.

6.5 Bluetooth function operationBluetooth characteristics:1. With functional keys on the main unit, it is to adjust volume freely.2. When answering of dialing a call, handfree car Bluetooth microphone can beused for direct talk to benefit you free of holding the phone while driving. It isa safe way free of breaking regulations. In addition, you are kept away fromelectromagnetic radiation from mobile phone.

Basic operation of BluetoothIn “Setup-Phone”, when phone function is enabled, if vehicle ACC is in state ofOn, Bluetooth changes to be enabled. Short press PHONE on the screen to popup Bluetooth interface.

Bluetooth pairing

21

When using Bluetooth phone function, Bluetooth pairing is required before using.For pairing, it is a must to enable mobile phone Bluetooth function. If to click“Pairing” on the screen, “Waiting for pairing…” will be shown at top of thescreen currently. Then, search Bluetooth equipment with mobile phone. Aftersearching, the mobile phone will find a new equipment of “ANS510” to makeconnection. The connection password is “0000”.

Dial and answer a callEnter phone number by short pressing corresponding numbers on the touchscreen. In case of wrong number entered, click to delete it. Atcompletion of entering, short press “Dial and answer” key at left top of the screento dial a call. In case of call coming, short press “Dial and answer” key at left topof the screen to answer it.

Hang up and refuse a callAt completion of phone talk, short press “Hang up and refuse a call” at right topof the screen to hang it up. In case of refusing an incoming, short press “Hang upand refuse a call” at right top of the screen to refuse it.

Handfree/hold to talkDuring talking on the phone, short press “Switchover” key on the touch screen toswitch over between mode of holding to talk or handfree talk.

Pairing recordIf to click “Pairing record” on the screen, you may check four latest pairingrecords stored in the system. When different mobile phones enter the coveragerange of Bluetooth signal of the system, as long as this equipment is available inpairing record of the system, it will automatically connect with the mobile phone.

22

Call recordIf to short press “Talk record” key and select “Dialed call”, “Answered call” and“Missed call” on the screen, you may check the corresponding record. Select thecorresponding item and short press “Gail and answer” key to dial this phonenumber.

RedialPress and hold “Dial and answer” key on the screen to dial the last number calledout. If incoming call Bluetooth is connected, in case of a call in, the machine willautomatically start up, hang up the call, and the system will automatically turn offthe screen.

PhonebookShort press “Phonebook” on the screen to access to name and phone numberdownloaded in the system. In case of use for the first time, it is required todownload phonebook into this system for access. When selecting phone number,the number can be dialed out. When vehicle computer screen displays in audiomode, phone number of dialed of answered will be shown on the screen.

Bluetooth musicShort press “Music” key on the screen to open Bluetooth audio interface.Meanwhile, the mobile phone is required to adjust to music play mode. Shortpress “Play/Pause” key on the screen to play music file stored in the mobilephone. Respectively clicking “Previous” “Next” key will skip to the previous andnext music in the mobile phone being played. Moreover, you may directlyoperate on the mobile phone to achieve synchronous play of the system and themobile phone.

23

6.60 Can-bus function operationNote: This system supports following functions of can-bus. However,these functions need original car module support. Please make surethat your car is equipped with related modules or corresponding data.

6.61. Three screen overlap functionIn power-on state, switch car gear to reverse mode. At this time, the systemis mute, and IPAS, OPS and camera video will be displayed on one screen.If just for camera video display click “<” key to hide OPS. If just need OPSfunction display, then click “>” on the screen. In state of three screenoverlap, if just need it display OPS with full screen alone, just need to click“OPS” key on the screen will be fine, when users need three screen overlapdisplay, just click “RVC” on the screen will get it.

6.62、“P” key OPS function

When driving speed is lower than 15KM/H or in idling state, press radar control“P” key on the car, the screen will skip to OPS interface.

24

This function is helpful for during parking without using reverse functionor driving at a low speed due to traffic jam. If driving speed is over 15KM,the system will automatically back from OPS and enter play mode.

(Note: As long as original car radar starts up, OPS radar will be shown onnavigation. When going back from reverse state to driving forward, it willswitch over from reverse video to OPS radar interface. At this time, whendriving speed reaches 15KM/H, it will automatically disappear, or pressradar control key “P”.)

6.6. Power-off rearview functionOn power-off state, when switch in driving state to reverse state, reversevideo will be shown. When switching the reverse state to other sate, screenwill be back to power-off state.

6.64. Air conditioning display functionThe system is equipped with dual (inside and outside temperature) Airconditioner (AC) information display function. When users open or adjustAC, screen will display dual AC information. Note: this function neededoriginal car air conditioning support. Some types of air conditioning do notsupport such function.

25

6.65. Door open warning functionIn power-on state, except in reverse mode, if users open any one of the fourcar doors, or engine cover, trunk hood, door open warning image will bedisplayed on the screen to show which one is now opened. When theopened door is closed, the screen will show closed state of it, andautomatically return to the former mode.

6.66 Steering wheel control functionWhen the original car is equipped with multifunctional steering wheel,steering wheel control operating will be valid. Users can control thenavigation directly via these keys in the steering wheel. The key at left sidein the steering wheel is for navigation control, and the key on the right sideis for control on driving computer information but not for the navigation.This system supports following functions: volume increase and decrease,previous and next, answer and hang up call, and mute.

26

6.67 Instrument panel display functionThis system supports MFD and entertainment system information display.MFD information display function is invalid when car computer is adjustedto “Sound system”. The displayed items are system mode, including DVD,SD, IPOD, USB, AUX, IN, FM, AM (including frequency), PHONE,incoming and outgoing call and phone number.

27

Ⅶ. Fault Clearence▲ NotesWhen you catch following problems during using, fault clearance will help youfind a quick solution. If the problem is still kept unsolved, please contactprofessionals or after-sales center. Unauthorized disassembly is prohibited toavoid serious damage caused.

Failure Reason Solution

Fail to startup

Fail to insert ACC into electric switch,fail to turn on theswitch

Insert car key to turn it on

Fail to insert powercord into the mainengine

Insert the power cord

Fuse was burned Replace a fuse with samestandard

The battery ofvehicle wasexhausted

Charge the battery

No audiooutput

Fail to connectspeakers cables

Properly connect the speakercables

“Mute” key on thepanel is pressed.

Press this key again

Over low volume Adjust to increase volumeNo sound from frontand back speakers,left and rightspeakers

Press “TONE” to enter “EQequalizer” to set up “frontand back/left and rightequalizer”.

Inaccuratetouch screen

Fail to calibratesystem touch

Enter “Touch screencalibration” to calibrate it.

No responseof touchscreen

The system isprocessing sometasks (Roadsearching, etc.)

Wait a moment. If problemunsolved for long-time, youare recommended to contactour after-sales engineer for asolution.

Fail to playthe disc

Wrong side of discplaced

Change disc side

Scratched, distortedor dirty disc

Place a qualified disc

Incompatible disc Make sure format of file,place compatible disc

Dark screen Over low brightness, Adjust brightness, contrast

28

or white andblack screenwhen playingDVD

contrast and chromaadjusted

and chroma to a proper level

Slow cardreading

Pixel of picture fileis beyond support ofthe system

Change to audio SD cardwith supported information

SD card with virus

No rearviewfor reverse

Fail connect camerasignal cable withthe main engine

Insert camera signal cable tothe main engine

Less radiostation or failto searchradio station

Fail to insert radioantenna

Insert the antenna in

GPS fails forpositioningandnavigation

Fail to insert GPSantenna

Insert GPS antenna in

Possibly in GPSsignal screened area

Drive away from a certaindistance to check if GPSsignal is recovered. If stillunsolved, please contact ourafter-sales department.

Blind zone ofnavigation map:some areas arebeyond the map

Please contact us, make sureto update the map

Fail to finddestination byfuzzy search

Input point is not inthe navigationdatabase

Firstly make sure if the nameentered is correct. Make a trywith another name of thearea, or to enter a famousplace of the adjacent area

The routeplanned bynavigation ofthe “fartherway”

When searchingroad, whatconsidered by thenavigation is notonly the distancebut much moreother factors.

If you are familiar with theroute for destination, youmay change the route ofdriving. At this time, thenavigation will plan anotherroute for you. You arerecommended to follow theroute from the navigation.

Blank on map Over large or smallof navigation scaleset

Try to change scale. If stillunsolved, select anotherlandmark for a solution

29

Ⅷ. Technical parametersOperating voltage..........................................................................12VRange of operating voltage..........................................10.5-14.8V DCMax. operating current...................................................................15ADimension... ... ... ... ..220 upper width (210 lower width)*130*175MMGrounding system..........................................Car battery negative pole

FMFrequency range.............................................................87.5-108MHzS/N…………...............................................................................60dBStereo resolution (1KHz)………............................................... ≥30dBSearch radio station level....................................................24±2dBuVDistortion.....................................................................................0.5%

AMFrequency range...........................................................531-1629MHzNoise limited sensibility (S/N=20Db)....................................... ≥26DbS/N…...........................................................................................55dB

DVDS/N..............................................................................................70dBFrequency response range..............................................20Hz-20KHzDistortion....................................................................................0.1%