ANNOUNCEMENT OF VACANT POSITIONSitdi.dost.gov.ph/images/Personnel/2019/20190507AVP.pdf ·...
3
Republic of the Philippines Department of Science and Technology INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE DOST Cpd.,General Santos Ave., Bicutan, Taguig City General Santos Avenue, Bicutan, Taguig City Tel. Nos.: 837-2071 to 82 (DOST Trunklines) Telefax No.: 837-3167 local 2219/2222 http:/ /www.itdi.dost. gov.ph ANNOUNCEMENT OF VACANT POSITIONS REF. ITEM CIVIL SERVICE COMMISSION- QUALIFICATION REQUIREMENT POSITI ON TITLE DUTIES AND RESPONSIBILITIES ADDITIONAL REQUIREMENT NUMBER EDUCATION EXPERIENCE TRAINING ELIGIBILITY I. National Metrolgoy Division (NMD) 1. Senior Science Research 1 ITDIB-SRSRS-77-1998 Bachelor's degree 2 years of relevant 8 hours of relevant Career Service • Perform calibration of non-routine, high accuracy * Preferably BS Physics or BS Specialist relevant to the job experience training (Professional) calibration standards of customers Mechanical or Civil Engineering Salary Grade: 19 Second Level • Maintain national reference standards, secondary Graduate Eligibility and working calibration standards * Two years' working experience in Basic Annual Salary: • Adapt existing calibration equipment, standards and * RA1080 one of the following disciplines - P 543,228.00 techniques to accomplish unique measurement tasks physicals/mechanical, optical, Monthly Additional Allowances for which they are not principally used P2,000.00 PERA * Prepare and approve calibration reports and dimensional P3,000.00 Subsistance Allowance certifi cates * With knowledge in the At least 15% of Basic Salary as • Review and check raw data sheets, and calibration requirements and experience in the Hazard Pay report s of subordinates operation of an ISO 17025 compliant • Perform uncertainty evaluation and analysis for laboratory measurement standards and associated processes * Preferably obtained training on any • Develop the necessary software for the calibration metrology fi eld at a foreign National and maintenance of calibration standards Metrology Institute (NMI) • Train subordinates in calibration concepts and * Able to prepare technical procedures • Develop, implement and maintain the laboratory's procedures and work instructions quality systems in accordance with published * With experience in conducting intenational standards proficienct testing . • Work towards the international recognition of the * Proficient in Microsoft Excel and its laboratory's calibration capabilities and its Visual Basic Applications maintenance • Provide technical training and expert advice to other organizational as needed As of May 7, 2019 In compliance with CSC MC No.3 s. 2001 (Implementing RA 7041, Requiring Publication of Vacant Positions in Government Offi ces), notice is hereby given that the vacant positions listed below at ITDI are proposed to be filled. Pagelof3
Transcript of ANNOUNCEMENT OF VACANT POSITIONSitdi.dost.gov.ph/images/Personnel/2019/20190507AVP.pdf ·...
Republic of the Philippines
Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
DOST Cpd.,General Santos Ave., Bicutan, Taguig City
General Santos Avenue, Bicutan, Taguig City
Tel. Nos.: 837-2071 to 82 (DOST Trunklines) Telefax No.: 837-3167 local 2219/2222
http://www.itdi.dost.gov.ph
ANNOUNCEMENT OF VACANT POSITIONS
REF. ITEM CIVIL SERVICE COMMISSION- QUALIFICATION REQUIREMENT POSITION TITLE DUTIES AND RESPONSIBILITIES ADDITIONAL REQUIREMENT NUMBER EDUCATION EXPERIENCE TRAINING ELIGIBILITY
I. National Metrolgoy Division (NMD)
1. Senior Science Research 1 ITDIB-SRSRS-77-1998 Bachelor's degree 2 years of relevant 8 hours of relevant Career Service • Perform calibration of non-routine, high accuracy * Preferably BS Physics or BS Specialist relevant to the job experience training (Professional) calibration standards of customers Mechanical or Civil Engineering Salary Grade: 19 Second Level • Maintain national reference standards, secondary Graduate
Eligibility and working calibration standards * Two years' working experience in Basic Annual Salary:
• Adapt existing calibration equipment, standards and * RA1080 one of the following disciplines - P 543,228.00 techniques to accomplish unique measurement tasks
physicals/mechanical, optical, Monthly Additional Allowances for which they are not principally used P2,000.00 PERA * Prepare and approve calibration reports and dimensional P3,000.00 Subsistance Allowance certificates * With knowledge in the At least 15% of Basic Salary as • Review and check raw data sheets, and calibration requirements and experience in the Hazard Pay reports of subordinates operation of an ISO 17025 compliant
• Perform uncertainty evaluation and analysis for laboratory measurement standards and associated processes * Preferably obtained training on any • Develop the necessary software for the calibration
metrology field at a foreign National and maintenance of calibration standards
Metrology Institute (NMI) • Train subordinates in calibration concepts and
* Able to prepare technical procedures • Develop, implement and maintain the laboratory's procedures and work instructions
quality systems in accordance with published * With experience in conducting intenational standards proficienct testing
. • Work towards the international recognition of the * Proficient in Microsoft Excel and its laboratory's calibration capabilities and its Visual Basic Applications maintenance • Provide technical training and expert advice to other organizational as needed
As of May 7, 2019
In compliance with CSC MC No.3 s. 2001 (Implementing RA 7041, Requiring Publication of Vacant Positions in Government Offices), notice is hereby given that the vacant positions listed below
at ITDI are proposed to be filled.
Pagelof3
Republic of the Philippines
Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
DOST Cpd.,General Santos Ave., Bicutan, Taguig City General Santos Avenue, Bicutan, Taguig City
Tel. Nos.: 837-2071 to 82 (DOST Trunklines) Telefax No.: 837-3167 local 2219/2222 http://www. itdi. dost .gov. ph
ANNOUNCEMENT OF VACANT POSITIONS
REF. ITEM CIVIL SERVICE COMMISSION- QUALIFICATION REQUIREMENT POSITION TITLE DUTIES AND RESPONSIBILITIES ADDITIONAL REQUIREMENT
NUMBER EDUCATION EXPERIENCE TRAINING ELIGIBILITY
2. Science Research Specialist II 1 ITD1B-SRAS2-93-1998 Bachelor's degree 1 year of relevant 4 hours of relevant Career Service • Perform calibration of customer's equipment * Preferably BS Physics or BS Salary Grade: 16 relevant to the job experience training ( Professiona I) • Evaluate measurement uncertainty Mechanical or Civil Engineering
Second Level • Prepare calibration certificates and test reports graduate Basic Annual Salary: Eligibility • Develop technical procedures and work instructions * With relevant working experience P 403,008.00 • Conduct in-house technical training on calibration
Monthly Additional Allowances * RA1080 • Train newly hired laboratory personnel in a calibration laboratory
P2,000.00 PERA • Prepare presentations to be used in seminars, * With knowledge in the
P3,000.00 Subsistance Allowance training and fora requirements and experience in the
At least 15% of Basic Salary as • Conceptualize and prepare project proposals operation of an ISO 17025 compliant
Hazard Pay laboratory * Able to evaluate uncertainty in measurement • Experience in conducting proficiency testing * Proficient in Microsoft Excel and Its Visual Basic Applications
As of May 7, 2019 In compliance with CSC MC No.3 s. 2001 (Implementing RA 7041, Requiring Publication of Vacant Positions in Government Offices), notice is hereby given that the vacant positions listed below
at ITDI are proposed to be filled.
Page 2 of 3
Republic of the Philippines
Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
DOST Cpd.,General Santos Ave., Bicutan, Taguig City
General Santos Avenue, Bicutan, Taguig City
Tel. Nos.: 837-2071 to 82 (DOST Trunklines) Telefax No.: 837-3167 local 2219/2222
http://www. itd i. dost.gov. ph
ANNOUNCEMENT OF VACANT POSITIONS
REF. ITEM CIVIL SERVICE COMMISSION- QUALIFICATION REQUIREMENT POSITION TITLE DUTIES AND RESPONSIBILITIES ADDITIONAL REQUIREMENT
NUMBER EDUCATION EXPERIENCE TRAINING ELIGIBILITY
3. Science Aide 1 ITDIB-SCA-25-1998 Elementary School None required None required None required • To work at the Receiving and Releasing Unit of the * Proficient in Microsoft Excel and its
Salary Grade: g_ Graduate (MC 11, s. 96- Cat Ill National Metrology Division Visual Basic Applications
Basic Annual Salary: * Receive tehcnical service requests of customers • Ensure traceability of customer's items from entry to
P 158,568.00 exit Monthly Additional Allowances • Release calibrated item(s) & issue calibration/test
P2,000.00 PERA reports
P3,000.00 Subsistance Allowance • Record validated technical service requests & issued
At least 15% of Basic Salary as reports
Hazard Pay • Keep and store all files in order for easy retrieval * Assist in the encoding of information into National Metrology database • Assist in the preparation of accomplishment reports • Responsible for the cleanliness and orderliness of the receiving area at all times * Perform other task assigned by the immediate supervisor and Head
As of May 7, 2019
In compliance with CSC MC No.3 s. 2001 {Implementing RA 7041, Requiring Publication of Vacant Positions in Government Offices), notice is hereby given that the vacant positions listed below
at ITDI are proposed to be filled.
Qualified and interested applicants may apply personally and submit a letter of application, resume or curriculum vitae or Personal Data Sheet, official transcript of records, diploma, certificates of eligibility or board exam results, certificate of trainings and recent 2 X 2 pictures, to the Human Resource Management Office, Finance and Administrative Division on or before May 24, 2019.
Note: Attached also is the Applicants Data Sheet Form to be submitted together with the above mentioned documents.
Page3of3
/{_ Director, ITDI
