DEPARTMENT OF MECHANICAL ENGINEERING. SBIT KHAMMAM.

ANGULAR DISPLACEMENT DEMONSTRATION SET UP

AIM: To study of capacitance transducer for measuring displacement.

Apparatus required: Digital displacement indicator, capacitance pickup.

Theory:

The New-Tech Instrumentation Tutor is meant for measurement of Angle

through Angular transducer. The Tutor is very useful for study of displacement

through angular sensor. The circuit diagram is given on the top cover on the

tutor to understand the measurement parameter at a glance. All the different

test point are also provided on top cover with giving their headings to

facilitate the student to understand without any operation instruction by

any third person.

OPERATING PROCEDURE:

1. To connect the sensor at the 9 pin connector.

2. Switch ‘ON’ the ON/OFF switch and see the power indicator. The RED

LED on the front panel will glow.

3. Zero reading adjust Zero port.

4. Pull the Angular sensor from 0 to 360o

DEPARTMENT OF MECHANICAL ENGINEERING. SBIT KHAMMAM.

5. Adjust the span range by Span Control pot. reading 360o

Observations Table:

S. No.

Manual reading

Display reading

1.

2.

3.4.5.

DEPARTMENT OF MECHANICAL ENGINEERING. SBIT KHAMMAM.

RESULT: The study of capacitance transducer for measuring displacement is determined.