Angle Brackets Lifting Units∙ Lift the table within the stroke range. Usage outside the range may...
1
-1127 2 -1128 2 Angle Brackets Press-Fit / Standard / Ribbed M Material: SS400 S Surface Treatment: Trivalent Chromate (Silver) Lifting Units Part Number STYS12 Main Body Part Number H L T W D B A F G R P Unit Price Type No. Hole Dia. Applicable Screw Slotted HoleApplicable Screw STYS, STYD STTS, STTD SYDR, STDR Single Black Oxide STYS Trivalent Chromate STTS 10 100 75 7 45 12 M10 60 60 50 12 M10 6 - - - 12 150 100 9 50 16 M12 70 100 - 16 200 90 55 18 M16 120 60 14 M12 7 - - Double Black Oxide STYD (No Rib) SYDR (Ribbed) Trivalent Chromate STTD (No Rib) STDR (Ribbed) 10 100 75 7 70 12 M10 50 60 50 10 M8 5 45 - - 12 150 100 9 75 16 M12 70 100 50 16 200 90 80 18 M16 120 60 12 M10 6 55 - - Part Number STRS12 Part Number H L CT1 T2 T3 T4 W1 W2 D B F1 F2 G d P l Y E Unit Price Type No. Hole Dia. Applicable Screw Slotted Hole Applicable Screw STRS, STRW STRZ, STRZW Single STRS (Black) STRZ (Silver) 8 125 50 40 6 10 4 5 30 23 12 M8 35 50 50 7 M6 7 - 115 20 12 10 160 60 45 8 12 5 5 35 27 14 M10 40 60 75 9 M8 9 150 25 15 12 200 72 55 10 15 6 5 45 35 16 M12 50 70 100 11 M10 11 188 30 18 Double STRW (Black) STRZW (Silver) 10 150 60 - 8 12 5 10 65 8 14 M10 40 50 60 9 M8 9 30 140 25 15 12 200 80 10 15 6 15 80 10 16 M12 60 70 100 11 M10 11 50 188 30 20 Part Number Applicable Leveling Mount F BH LWT D R Unit Price Type No. Hole Dia. Applicable Screw STYU 12 FJFN12 (P.1110) 70 13 26 130 50 9 14 M12 6.5 16 FJFN16 (P.1110) 17 28 8.5 20 FJFN20 (P.1110) 21 31 10.5 Type Type MMaterial SSurface Treatment No Rib Ribbed STYS - Single SS400 Black Oxide (Black) STTS Trivalent Chromate (Silver) STYD SYDR Double Black Oxide (Black) STTD STDR Trivalent Chromate (Silver) QRibbed Type MMaterial SSurface Treatment STRS S25C Black Baked Finish STRW STRZ Baked Paint (Silver) STRZW QStandard QPress-Fit T4 T3 H Y E D L T2 T1 90° B W1 W2 d F2 F1 l C G Y H E B D L T1 T2 T4 T3 G d F1 F2 W1 W2 P l STRS (Black) STRZ (Silver) STRW (Black) STRZW (Silver) Single STYS STTS Double STYD STTD Ribbed (Weld) SYDR STDR G W R F A 25 25 D 25 F A D G P W R 25 25 25 H T B L B L H T W G P 6 A 50 R F 2-D Part Number - F - G JFCK20 JFCNB25 - 188 - 140 Type MMaterial SSurface Treatment Standard Hole Type JFCK JFCN S45C Trivalent Chromate JFCKB JFCNB Paint (Black) QLight Load QMedium Load L F B T W 35 D R 25 H STYU Part Number - Color JFMK20 JFMN30 - - G G Square/Round Hole Bore P.1153 It is usable to adjust heights of work platform etc. E Ensure that no loads are applied while lifting or lowering. Caution 1Do not allow people to ride on the lifting units. Vibration etc. may break the main body, resulting in injury. 2 Apply load evenly on the top plate in a vertical direction. Eccentric load such as load concentration on the plate edge may cause breakage. 3 Do not apply excessive torque on the handle while the load is applied. Sudden torque application by using electric tools etc. may break the main body. Operate manually with a dedicated handle. 4 Be sure to use within the stroke range. 1Main Body 2Adjusting Bolt Lead Screw Nut MMaterial SSurface Treatment (Color) MMaterial SSurface Treatment MMaterial SSurface Treatment SS400 Powder Paint (Light Gray) S45C - Brass - Part Number STYU12 Ribbed Standard Ribbed (Weld) Press-Fit Standard JFCK JFCKB (Black) A A t K L E H (min~max) t K A G F A 4-d Hole Type JFCN JFCNB (Black) Hole Type JFMN View X (Top Plate Hole Location) View Z (Bottom Plate Hole Location) F3 F2 U F1 Ø7 K3 K2 K1 Y Ø7 Standard JFMK Arm Roller Shaft Lead Screw Tr16P3 Right Hand Thread Part P Arm Roller Shaft Top / Bottom Plate Enlarged Part P Part P (Top / Bottom Plate Connected Part) A J E Ø10 L A Z X R Q L A t Hex Size 17 10.2 2.3 28.3 Ø30 2.3 28.3 H (min~max) EJFMK does not have mounting holes on either top or bottom plate. E Select set screws which do not interfere with the arm roller shaft. QCaution ∙ Do not allow people to ride on the lifting units. It may cause serious accidents. ∙ High speed rotational torque by electric tools will generate shock loads, which results in breakage. ∙ Only vertical load is allowed. Apply load evenly on the top table and avoid eccentric loads. ∙ Lift the table within the stroke range. Usage outside the range may cause breakage. ∙ Further rotation of the handle outside the stroke range may break the thread, impairing ability to lift. Folding wrench enables its rotation when there is an interfering object in the rotation direction. High workability Ratchet Type ERevolving Crank Handle with Square Bore MBCH (P.1153) can be attached on the end. E JFCN and JFCNB have mounting holes 4-d on both top and bottom surfaces. Tip Enlarged View 10 Ø16 24 7 M10 1 2 3 No. Stroke H Load Rotational Torque N ∙ m 20 1327 100kgf 6 2214 9 3102 15 25 1407 6 2254 9 3102 15 30 1495 6 2310 9 3125 15 QRotational Torque of Dedicated Wrench No. Stroke H Top Plate Lifted Amount Error 20 1297~327 4 ±0.5 2195~235 8.5 3102~137 17 ±1.0 25 1377~407 4 ±0.5 2235~275 8.5 3102~137 19 ±1.0 30 1465~495 4 ±0.5 2290~330 8.5 3125~155 18 ±1.0 QTable Travel Amount per Handle Rotation Part Number - Color - (SET) JFMK20 -G- SET Alterations Code Spec. Applicable Dedicated Wrench SET A dedicated wrench to turn the adjusting bolt of lifting units comes in a set. 226 8 32 10.5 35 17 180° Flexible MMaterial: Chromate, Mass: 190g JFMK JFMN E Dedicated wrench is not sold as a single item. Part Number Hole Type Stroke (H) A K E L t Static Allowable Load (kN) Mass (g) Unit Price 1 ~ 20 pcs. JFCN, JFCNB 1mm Increment d Standard Hole Type Type No. F G min max JFCK JFCKB JFCN JFCNB Standard JFCK JFCKB (Black) Hole Type JFCN JFCNB (Black) 15 30~100 30~60 4.5 95 247 150 26.6 19 177 1.6 0.49 2220 20 30~150 30~100 106 334 200 227 3080 25 30~200 30~150 128 432 250 32.3 276 2.3 4960 EFor orders larger than indicated quantity, please check with WOS. Part Number Body Color Stroke H Hole Type A L t R J Q E l Static Allowable Load (kN) Dynamic Allowable Load (kN) Mass (g) Unit Price 1 ~ 20 pcs. JFMN Top Plate Hole Location Bottom Plate Hole Location Standard Hole Type Type No. min max F1 F2 F3 K1 K2 K3 d1 U Y d2 JFMK JFMN JFMK (Standard) JFMN (Hole Type) 20 G (Light Gray) 102 327 140 100 60 110 80 50 7 140 110 7 200 270 2.3 58 42 12 24 266 1.5 1.0 8000 25 102 407 190 140 90 150 110 70 190 150 250 306 52 31 4 23 304 10000 30 125 495 240 180 120 170 130 90 240 170 300 357 50 24 7 30 354 15000 EFor orders larger than indicated quantity, please check with WOS. Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.
Transcript of Angle Brackets Lifting Units∙ Lift the table within the stroke range. Usage outside the range may...
-11272 -11282
Angle BracketsPress-Fit / Standard / Ribbed
M Material: SS400S Surface Treatment: Trivalent Chromate (Silver)
Lifting Units
Part Number
STYS12
Main Body
Part Number H L T W D B A F G R P Unit PriceType No. Hole Dia. Applicable Screw Slotted HoleApplicable Screw STYS, STYD STTS, STTD SYDR, STDR
SingleBlack Oxide
STYS Trivalent Chromate
STTS
10 100 75 7 45 12 M10 60 6050 12 M10 6
-- -
12 150 1009
50 16 M1270
100 -16 200 90 55 18 M16 120 60 14 M12 7 - -
Double
Black Oxide STYD (No Rib) SYDR (Ribbed)
Trivalent Chromate STTD (No Rib) STDR (Ribbed)
10 100 75 7 70 12 M10 50 6050 10 M8 5
45 - -
12 150 1009
75 16 M1270
100 50
16 200 90 80 18 M16 120 60 12 M10 6 55 - -
Part Number
STRS12
Part Number H L C T1 T2 T3 T4 W1 W2D B F1 F2
G d P l Y E Unit PriceType No. Hole Dia. Applicable Screw Slotted Hole Applicable Screw STRS, STRW STRZ, STRZW
SingleSTRS (Black)STRZ (Silver)
8 125 50 40 6 10 4 5 30 23 12 M8 35 50 50 7 M6 7-
115 20 1210 160 60 45 8 12 5 5 35 27 14 M10 40 60 75 9 M8 9 150 25 1512 200 72 55 10 15 6 5 45 35 16 M12 50 70 100 11 M10 11 188 30 18
DoubleSTRW (Black)STRZW (Silver)
10 150 60-
8 12 5 10 65 8 14 M10 40 50 60 9 M8 9 30 140 25 15
12 200 80 10 15 6 15 80 10 16 M12 60 70 100 11 M10 11 50 188 30 20
Part Number Applicable Leveling Mount F B H L W T D R Unit PriceType No. Hole Dia. Applicable Screw
STYU12 FJFN12 (P.1110)
7013 26
130 50 9 14 M126.5
16 FJFN16 (P.1110) 17 28 8.520 FJFN20 (P.1110) 21 31 10.5
TypeType MMaterial SSurface Treatment
No Rib Ribbed
STYS- Single
SS400
Black Oxide (Black)
STTS Trivalent Chromate (Silver)
STYD SYDRDouble
Black Oxide (Black)
STTD STDR Trivalent Chromate (Silver)
QRibbedType MMaterial SSurface Treatment
STRS
S25C
Black Baked FinishSTRW
STRZBaked Paint (Silver)
STRZW
QStandard
QPress-Fit
T4 T3
H
Y
ED
L
T2T1
90°
B
W1W2
d
F2F1
l
C
G YH
EB
D
L
T1T2
T4
T3
G
d
F1F2
W1
W2
P
l
STRS (Black)
STRZ (Silver)STRW (Black)
STRZW (Silver)
SingleSTYSSTTS
DoubleSTYDSTTD
Ribbed (Weld)SYDRSTDR
GW
R
F
A2525
D25
FA
D
GPW
R
25
2525
HT
BL
BL
HT
W
GP6
A
50
R
F
2-D
Part Number - F - G
JFCK20JFCNB25 -
188 - 140
TypeMMaterial SSurface
TreatmentStandard Hole TypeJFCK JFCN
S45CTrivalent Chromate
JFCKB JFCNB Paint (Black)
QLight Load
QMedium Load
L
F
B
T
W
35
DR
25H
STYU
Part Number - Color
JFMK20JFMN30
--
GG
Square/Round Hole BoreP.1153
It is usable to adjust heights of work platform etc.
E�Ensure that no loads are applied while lifting or lowering.
Caution
1Do not allow people to ride on the lifting units.Vibration etc. may break the main body, resulting in injury.2�Apply load evenly on the
top plate in a vertical direction.
Eccentric load such as load concentration on the plate edge may cause breakage.3�Do not apply excessive torque on the handle while the load is applied.Sudden torque application by using electric tools etc. may break the main body. Operate manually with a dedicated handle.4�Be sure to use within the stroke range.
1Main Body2Adjusting Bolt
Lead Screw Nut
MMaterialSSurface Treatment (Color)MMaterialSSurface TreatmentMMaterialSSurface Treatment
SS400 Powder Paint (Light Gray) S45C - Brass -
Part Number
STYU12
RibbedStandard Ribbed (Weld)Press-Fit
StandardJFCKJFCKB (Black)
A
A
10
Ø16
247 M10
tK
L
E
H (m
in~
max
)t K
AG
FA
4-d
Hole TypeJFCNJFCNB (Black)
Hole TypeJFMN
Arm Roller Shaft
Lead ScrewTr16P3 Right Hand Thread
Part P
Arm Roller Shaft
Top / Bottom PlateEnlarged Part P View X (Top Plate Hole Location)
Part P (Top / Bottom Plate Connected Part)
View Z (Bottom Plate Hole Location)
A
F3F2
U
F1
J E
Ø7
Ø10
L
AZ
X
R QL
A
K3 K2 K1 Y
t
Hex
Size
17
10.2
2.3
28.3
Ø30
2.3
28.3
H (m
in~
max
)
Ø7
StandardJFMK
Arm Roller Shaft
Lead ScrewTr16P3 Right Hand Thread
Part P
Arm Roller Shaft
Top / Bottom PlateEnlarged Part P View X (Top Plate Hole Location)
Part P (Top / Bottom Plate Connected Part)
View Z (Bottom Plate Hole Location)
A
F3F2
U
F1
J E
Ø7
Ø10
L
AZ
X
R QL
A
K3 K2 K1 Y
t
Hex
Size
17
10.2
2.3
28.3
Ø30
2.3
28.3
H (m
in~
max
)
Ø7
EJFMK does not have mounting holes on either top or bottom plate.
E�Select set screws which do not interfere with the arm roller shaft.
QCaution∙ Do not allow people to ride on the lifting units. It may cause serious accidents.∙ High speed rotational torque by electric tools will generate shock loads, which results in breakage.∙ Only vertical load is allowed. Apply load evenly on the top table and avoid eccentric loads.∙ Lift the table within the stroke range. Usage outside the range may cause breakage.∙ Further rotation of the handle outside the stroke range may break the thread, impairing ability to lift.
Folding wrench enables its rotation when there is an interfering object in the rotation direction.
High workabilityRatchet Type
E Revolving Crank Handle w i t h S q u a r e B o r e MBCH (P.1153) can be attached on the end.
E �JFCN and JFCNB have mounting holes 4-d on both top and bottom surfaces.
Tip Enlarged View
A
A
10
Ø16
247 M10
tK
L
E
H (m
in~
max
)t K
1
2
3
No. StrokeH Load Rotational Torque
N ∙ m
201327
100kgf
62214 93102 15
251407 62254 93102 15
301495 62310 93125 15
QRotational Torque of Dedicated Wrench
No. StrokeH
Top PlateLifted Amount Error
201297~327 4
±0.52195~235 8.53102~137 17 ±1.0
251377~407 4
±0.52235~275 8.53102~137 19 ±1.0
301465~495 4
±0.52290~330 8.53125~155 18 ±1.0
QTable Travel Amount per Handle Rotation
Part Number - Color - (SET)
JFMK20 - G - SET
Alterations Code Spec. Applicable
Dedicated Wrench SET
A dedicated wrench to turn the adjusting bolt of lifting units comes in a set.
226
8
3210
.5
3517
180°Flexible
MMaterial: Chromate, Mass: 190g
JFMK
JFMN
E�Dedicated wrench is not sold as a single item.
Part NumberHole Type
Stroke (H) A K E L t
Static Allowable
Load(kN)
Mass (g)
Unit Price 1 ~ 20 pcs.JFCN, JFCNB1mm Increment d Standard Hole Type
Type No. F G min max JFCK JFCKB JFCN JFCNBStandard JFCKJFCKB (Black)Hole TypeJFCNJFCNB (Black)
15 30~100 30~60
4.5
95 247 15026.6
19
1771.6
0.49
2220
20 30~150 30~100 106 334 200 227 3080
25 30~200 30~150 128 432 250 32.3 276 2.3 4960
EFor orders larger than indicated quantity, please check with WOS.
Part Number Body Color
StrokeH
Hole Type
A L t R J Q E lStatic
Allowable Load (kN)
Dynamic Allowable
Load (kN)
Mass (g)
Unit Price1 ~ 20 pcs.JFMN
Top Plate Hole Location Bottom Plate Hole Location Standard Hole TypeType No. min max F1 F2 F3 K1 K2 K3 d1 U Y d2 JFMK JFMN
JFMK (Standard)JFMN (Hole Type)
20G
(Light Gray)
102 327 140 100 60 110 80 507
140 1107
200 2702.3
58 42 12 24 2661.5 1.0
800025 102 407 190 140 90 150 110 70 190 150 250 306 52 31 4 23 304 1000030 125 495 240 180 120 170 130 90 240 170 300 357 50 24 7 30 354 15000
EFor orders larger than indicated quantity, please check with WOS.
Note that, for some of the types shown here, order might be unable to be received by the MISUMI Indonesia offices.
![MPSA Teks 1 V1 2020 pptx [Auto-saved] · 2020. 1. 24. · C C TEKS Shooting Range Layout Gate Parking Area (OUTSIDE RANGE AREA) Unloading Station C Range 3 Range 4 Range 5 Range 2](https://static.fdocuments.in/doc/165x107/5fc3797635fdc0720407c46a/mpsa-teks-1-v1-2020-pptx-auto-saved-2020-1-24-c-c-teks-shooting-range-layout.jpg)
